summaryrefslogtreecommitdiff
path: root/drivers/misc/mei/debugfs.c
AgeCommit message (Collapse)AuthorFilesLines
2022-09-12mei: debugfs: add pxp mode to devstate in debugfsTomas Winkler1-1/+18
Add pxp mode devstate to debugfs to monitor pxp state machine progress. This is useful to debug issues in scenarios in which the pxp state needs to be re-initialized, like during power transitions such as suspend/resume. With this debugfs the state could be monitored to ensure that pxp is in the ready state. CC: Vitaly Lubart <vitaly.lubart@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220907215113.1596567-15-tomas.winkler@intel.com Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2021-02-06mei: add support for client dma capabilityAlexander Usyskin1-0/+1
Client DMA capability indicates whether the firmware supports setting up a direct DMA channel between the host and me client. The DMA capabilities are supported from firmware HBM version 2.2 and newer. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210206144325.25682-3-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18mei: add vtag support bit in client propertiesAlexander Usyskin1-3/+4
Vtag support is on a client basis, meaning not every client supports it. The vtag capability is communicated via the client properties structure during client enumeration process. Export the propertiy via sysfs. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200818115147.2567012-4-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18mei: restrict vtag support to hbm version 2.2Alexander Usyskin1-0/+1
The vtag allows partitioning the mei messages into virtual groups/channels. Vtags are supported for firmwares with HBM version 2.2 and newer and only when a firmware confirms the support via capability handshake. This change only define vtag restrictions in order to make the series bisectable. Everything will be enabled when driver HBM version is set to 2.2. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200818115147.2567012-3-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-18mei: hbm: add capabilities messageAlexander Usyskin1-0/+1
The new capabilities command in HBM version 2.2 allows performing capabilities handshake between the firmware and the host driver. The driver requests a capability by setting the appropriate bit in 24bit wide bitmask and the fw responses with the bit set providing the requested capability is supported. Bump copyright year in affected files. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20200818115147.2567012-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds1-36/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-06-18mei: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-36/+11
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21mei: Convert to use DEFINE_SHOW_ATTRIBUTE macroVitaly Lubart1-132/+52
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Vitaly Lubart <vitaly.lubart@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28mei: adjust the copyright notice in the files.Tomas Winkler1-1/+1
Use unified version of the copyright notice in the files Update copyright years according the year the files were touched, except this patch and SPDX conversions. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-28mei: convert to SPDX license tagsTomas Winkler1-11/+2
Replace boiler plate licenses texts with the SPDX license identifiers in the mei files header. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-02mei: restrict dma ring support to hbm version 2.1Tomas Winkler1-0/+2
Only a firmware with version 2.1 and above supports dma ring feature. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-14mei: limit the number of queued writesAlexander Usyskin1-3/+4
Limit the number of queued writes per client. Writes above this threshold are blocked till place in the transmit queue is available. The limit is configurable via sysfs and defaults to 50. The implementation should provide blocking I/O behavior. Prior to this change one would end up in the hands of OOM. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-20Merge branch 'locking-core-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking updates from Ingo Molnar: "The main changes in this cycle were: - Implement wraparound-safe refcount_t and kref_t types based on generic atomic primitives (Peter Zijlstra) - Improve and fix the ww_mutex code (Nicolai Hähnle) - Add self-tests to the ww_mutex code (Chris Wilson) - Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr Bueso) - Micro-optimize the current-task logic all around the core kernel (Davidlohr Bueso) - Tidy up after recent optimizations: remove stale code and APIs, clean up the code (Waiman Long) - ... plus misc fixes, updates and cleanups" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits) fork: Fix task_struct alignment locking/spinlock/debug: Remove spinlock lockup detection code lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS lkdtm: Convert to refcount_t testing kref: Implement 'struct kref' using refcount_t refcount_t: Introduce a special purpose refcount type sched/wake_q: Clarify queue reinit comment sched/wait, rcuwait: Fix typo in comment locking/mutex: Fix lockdep_assert_held() fail locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock() locking/rwsem: Reinit wake_q after use locking/rwsem: Remove unnecessary atomic_long_t casts jump_labels: Move header guard #endif down where it belongs locking/atomic, kref: Implement kref_put_lock() locking/ww_mutex: Turn off __must_check for now locking/atomic, kref: Avoid more abuse locking/atomic, kref: Use kref_get_unless_zero() more locking/atomic, kref: Kill kref_sub() locking/atomic, kref: Add kref_read() locking/atomic, kref: Add KREF_INIT() ...
2017-01-14locking/atomic, kref: Add kref_read()Peter Zijlstra1-1/+1
Since we need to change the implementation, stop exposing internals. Provide kref_read() to read the current reference count; typically used for debug messages. Kills two anti-patterns: atomic_read(&kref->refcount) kref->refcount.counter Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-11mei: bus: enable OS version only for SPT and newerAlexander Usyskin1-0/+2
Sending OS version for support of TPM2_ChangeEPS() is required only for SPT FW (HMB version 2.0) and newer. On older platforms the command should be just ignored by the firmware but some older platforms misbehave so it's safer to send the command only if required. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=192051 Fixes: 7279b238bade (mei: send OS type to the FW) Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07mei: hbm: send immediate reply flag in enum requestAlexander Usyskin1-0/+2
Signal the FW that it can send an HBM enumeration answer immediately, without waiting for FW initialization completion, meaning before all the FW clients are ready and registered. Organize enumeration response options to enum as a byproduct. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07mei: fixed address clients for the new platformsAlexander Usyskin1-2/+29
Enable by default connection to fixed address clients from user-space for skylake and newer platform. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07mei: debugfs: allow hbm features list dump in earlier stagesAlexander Usyskin1-1/+2
HBM features list is ready while sending enumerate request and enumerating clients, output it to debugfs in these states too. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-07mei: debugfs: adjust active clients print bufferAlexander Usyskin1-7/+22
In case of many active host clients clients (41 and more) 1K buffer is not enough for full information print. Calculate buffer size according to real clients number. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-27mei: Fix debugfs filename in error outputAlexander Kuleshov1-1/+1
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-20mei: fix debugfs files leak on error pathTomas Winkler1-1/+2
if dbgfs_dir is not set then debugfs_remove_recursive is not called on the error path Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03mei: enable async event notifications only from hbm version 2.0Tomas Winkler1-0/+2
Only FW version 2.0 and newer support the async event notification. For backward compatibility block the feature if the FW version is older then 2.0 Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03mei: disconnect on connection request timeoutAlexander Usyskin1-0/+2
For the FW with HBM version >= 2.0 we don't need to reset the whole device in case of a particular client failing to connect, it is enough to send disconnect a request to bring the device to the stable state. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03mei: support for dynamic clientsTomas Winkler1-0/+2
HBM version 2.0 and above allows ME clients in the system to register/unregister after the system is fully initialized. Clients may be added or removed after enum_resp message was received 1. To preserve backward compatibility the driver can opt-in to receive client add messages by setting allow_add field in enum_req 2. A new client is added upon reception of MEI_HBM_ADD_CLIENT_REQ_CMD 3. A client is removed in a lazy manner when connection request respond with MEI_HBMS_CLIENT_NOT_FOUND status Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: export hbm features to debugfs under devstateTomas Winkler1-0/+7
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: connection to fixed address clients from user-spaceAlexander Usyskin1-0/+6
This should be used for debug only. The feaure is gated by "allow_fixed_address" control exposed in debugfs. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: add a reference from the host client to the me clientAlexander Usyskin1-1/+1
Keep a pointer to associated me client in the host client object to eliminate me client searches. Check if the me client is active in the firmware by checking if its is linked on the me clients list Add accessors for the me client properties from host client. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: allow read concurrencyTomas Winkler1-1/+1
Replace clunky read state machine with read stack implemented as per client read list, this is important mostly for mei drivers with unsolicited reads Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-01mei: revamp me clients list handlingTomas Winkler1-10/+9
1. Use rw lock to access the me_clients list 2. Reuse already defined find functions also when removing particular me client 3. Add wrappers for addition and deletion Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25mei: add reference counting for me clientsTomas Winkler1-12/+20
To support dynamic addition and removal of me clients we add reference counter. Update kdoc with locking requirements. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-03mei: debugfs: display also connectionless clientsTomas Winkler1-6/+2
<debugfs>meiX/meclients: display also fixed/connectionless clients Use better name for fixed client field: fixed_address is boolean and indicates whether a client is fixed or dynamic. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: fix kernel-doc warningsAlexander Usyskin1-0/+2
Add missed parameters descriptions and return values descriptions Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: fix KDoc documentation formattingAlexander Usyskin1-2/+5
Fix Kdoc documentation formatting warnings genertaed by ./scripts/kernel-doc Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: trivial: fix errors in prints in commentsAlexander Usyskin1-1/+1
Fix misspellings and wrong print texts Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: remove include to pci header from mei module filesTomas Winkler1-1/+0
Remove inclusion of linux/pci.h in mei layer however we need to include the headers that before got included implicitly from linux/pci.h. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: get rid of most of the pci dependencies in meiTomas Winkler1-3/+3
For purpose of adding testing HW we would like to get rid of pci dependency in generic mei code This patch provides only straight forward changes FW status and prob quirks need to be handled separately Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: fix style warning: Missing a blank line after declarationsTomas Winkler1-0/+1
fix new style warning: Missing a blank line after declarations Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: debugfs: add single buffer indicatorTomas Winkler1-3/+4
Add indication whether the client operates in single buffer mode Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: debugfs: adjust print bufferAlexander Usyskin1-7/+15
In case of many me clients (15 and more) 1K buffer is not enough for full information print. Calculate buffer size according to real clients number. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: add hbm and pg state in devstate debugfs printAlexander Usyskin1-1/+6
Add hbm state, pg enablement and state to devstate file in debugfs (<debugfs>/mei/devstate) Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-23mei: use list for me clients book keepingTomas Winkler1-10/+9
To support dynamic addition/remove of clients it is more convenient to use list instead of static array Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-07mei: export active connections to debugfsTomas Winkler1-0/+54
Export active connection state to debugfs The information displayed is [me,host] id pair, client connection state, and client's read and write states Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-08mei: fix syntax in comments and debug outputAlexander Usyskin1-2/+2
Fix syntax errors in comments and debug strings Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11mei: convert to use simple_open()Wei Yongjun1-8/+2
This removes an open coded simple_open() function and replaces file operations references to the function with simple_open() instead. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05mei: add debugfs hooksTomas Winkler1-0/+149
debugfs exposes device state and list of me clients and their properties Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 03:05:42 +0000