summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2012-07-09mfd: Add missing hunk to change palmas irq to clear on readGraeme Gregory1-1/+8
During conversion to regmap_irq this hunk was missing being moved to MFD driver to put the chip into clear on read mode. Also as slave is now set use it to determine which slave for the register call. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Fix palmas regulator pdata missingGraeme Gregory1-0/+3
Due to a merge error the section of code passing the pdata for the regulator driver to the mfd_add_devices via the children structure was missing. This corrects this problem. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues.Russ Dill1-1/+47
'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' (1fcb57d0) fixes an issue where the ULPI PHYs were not held in reset while initializing the EHCI controller. However, it also changes behavior in omap-usb-host.c omap_usbhs_init by releasing reset while the configuration in that function was done. This change caused a regression on BB-xM where USB would not function if 'usb start' had been run from u-boot before booting. A change was made to release reset a little bit earlier which fixed the issue on BB-xM and did not cause any regressions on 3430 sdp, the board for which the fix was originally made. This new fix, 'USB: EHCI: OMAP: Finish ehci omap phy reset cycle before adding hcd.', (3aa2ae74) caused a regression on OMAP5. The original fix to hold the EHCI controller in reset during initialization was correct, however it appears that changing omap_usbhs_init to not hold the PHYs in reset during it's configuration was incorrect. This patch first reverts both fixes, and then changes ehci_hcd_omap_probe in ehci-omap.c to hold the PHYs in reset as the original patch had done. It also is sure to incorporate the _cansleep change that has been made in the meantime. I've tested this on Beagleboard xM, I'd really like to get an ack from the 3430 sdp and OMAP5 guys before getting this merged. v3 - Brown paper bag its too early in the morning actually run git commit amend fix v2 - Put cansleep gpiolib call outside of spinlock Acked-by: Mantesh Sarashetti <mantesh@ti.com> Tested-by: Mantesh Sarashetti <mantesh@ti.com> Acked-by: Keshava Munegowda <keshava_mgowda@ti.com> Tested-by: Keshava Munegowda <keshava_mgowda@ti.com> Signed-off-by: Russ Dill <Russ.Dill@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Update twl6040 Kconfig to avoid build breakagePeter Ujfalusi1-0/+1
twl6040 needs CONFIG_IRQ_DOMAIN to compile, without this we have: drivers/mfd/twl6040-irq.c: In function 'twl6040_irq_init': drivers/mfd/twl6040-irq.c:164:2: error: implicit declaration of function 'irq_domain_add_legacy' drivers/mfd/twl6040-irq.c:165:11: error: 'irq_domain_simple_ops' undeclared (first use in this function) drivers/mfd/twl6040-irq.c:165:11: note: each undeclared identifier is reported only once for each function it appears in Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Delete ab5500-core.hPaul Bolle1-87/+0
Commit 72fb92200d6c31b9982c06784e4bcff2f5b7d8b6 ("mfd/ab5500: delete AB5500 support") deleted all files that used ab5500-core.h. That file apparently was simply overlooked. Delete it too. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: mc13xxx workaround SPI hardware bug on i.MxPhilippe Rétornaz1-1/+64
The MC13xxx PMIC is mainly used on i.Mx SoC. On those SoC the SPI hardware will deassert CS line as soon as the SPI FIFO is empty. The MC13xxx hardware is very sensitive to CS line change as it corrupts the transfer if CS is deasserted in the middle of a register read or write. It is not possible to use the CS line as a GPIO on some SoC, so we need to workaround this by implementing a single SPI transfer to access the PMIC. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Fix mc13xxx SPI regmapPhilippe Rétornaz1-1/+1
This fix the SPI regmap configuration, the wrong write flag was used. Also, bits_per_word should not be set as the regmap spi implementation uses a 8bits transfert granularity. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Add terminating entry for i2c_device_id palmas tableAxel Lin1-0/+1
The i2c_device_id table is supposed to be zero-terminated. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-06-20Viresh has movedViresh Kumar2-3/+3
viresh.kumar@st.com email-id doesn't exist anymore as I have left the company. Replace ST's id with viresh.linux@gmail.com. It also updates .mailmap file to fix address for 'git shortlog' Signed-off-by: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-01ARM: ux500: Provide regulator support for SMSC911x via Device TreeLee Jones1-0/+1
This patch adds a fixed regulator for use by the SMSC911x Ethernet chip driver into the db8500 Device Tree. It also references other regulators required by the same device. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-29Merge tag 'mfd-3.5-1' of ↵Linus Torvalds48-1142/+4397
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD changes from Samuel Ortiz: "Besides the usual cleanups, this one brings: * Support for 5 new chipsets: Intel's ICH LPC and SCH Centerton, ST-E's STAX211, Samsung's MAX77693 and TI's LM3533. * Device tree support for the twl6040, tps65910, da9502 and ab8500 drivers. * Fairly big tps56910, ab8500 and db8500 updates. * i2c support for mc13xxx. * Our regular update for the wm8xxx driver from Mark." Fix up various conflicts with other trees, largely due to ab5500 removal etc. * tag 'mfd-3.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (106 commits) mfd: Fix build break of max77693 by adding REGMAP_I2C option mfd: Fix twl6040 build failure mfd: Fix max77693 build failure mfd: ab8500-core should depend on MFD_DB8500_PRCMU gpio: tps65910: dt: process gpio specific device node info mfd: Remove the parsing of dt info for tps65910 gpio mfd: Save device node parsed platform data for tps65910 sub devices mfd: Add r_select to lm3533 platform data gpio: Add Intel Centerton support to gpio-sch mfd: Emulate active low IRQs as well as active high IRQs for wm831x mfd: Mark two lm3533 zone registers as volatile mfd: Fix return type of lm533 attribute is_visible mfd: Enable Device Tree support in the ab8500-pwm driver mfd: Enable Device Tree support in the ab8500-sysctrl driver mfd: Add support for Device Tree to twl6040 mfd: Register the twl6040 child for the ASoC codec unconditionally mfd: Allocate twl6040 IRQ numbers dynamically mfd: twl6040 code cleanup in interrupt initialization part mfd: Enable ab8500-gpadc driver for Device Tree mfd: Prevent unassigned pointer from being used in ab8500-gpadc driver ...
2012-05-24mfd: Fix build break of max77693 by adding REGMAP_I2C optionChanwoo Choi1-0/+1
This patch add REGMAP_I2C config option to fix build break of max77693 mfd driver because max77693 use regmap interface for i2c communication. drivers/mfd/max77693.c:103: error: variable 'max77693_regmap_config' has initializer but incomplete type drivers/mfd/max77693.c:104: error: unknown field 'reg_bits' specified in initializer drivers/mfd/max77693.c:104: warning: excess elements in struct initializer drivers/mfd/max77693.c:104: warning: (near initialization for 'max77693_regmap_config') drivers/mfd/max77693.c:105: error: unknown field 'val_bits' specified in initializer drivers/mfd/max77693.c:105: warning: excess elements in struct initializer drivers/mfd/max77693.c:105: warning: (near initialization for 'max77693_regmap_config') drivers/mfd/max77693.c:106: error: unknown field 'max_register' specified in initializer drivers/mfd/max77693.c:106: warning: excess elements in struct initializer drivers/mfd/max77693.c:106: warning: (near initialization for 'max77693_regmap_config') drivers/mfd/max77693.c: In function 'max77693_i2c_probe': drivers/mfd/max77693.c:122: error: implicit declaration of function 'devm_regmap_init_i2c' drivers/mfd/max77693.c:122: warning: assignment makes pointer from integer without a cast Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-23Merge tag 'regmap-domain-deps' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull a regmap kconfig dependency fix from Mark Brown: "Fix the dependency on IRQ_DOMAIN for REGMAP_IRQ in the core Fixes a missing select from the Palmas driver a bit more throoughly." * tag 'regmap-domain-deps' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: Use select .. if to get IRQ_DOMAIN enabled
2012-05-23Merge tag 'sound-3.5' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This is the first big chunk for 3.5 merges of sound stuff. There are a few big changes in different areas. First off, the streaming logic of USB-audio endpoints has been largely rewritten for the better support of "implicit feedback". If anything about USB got broken, this change has to be checked. For HD-audio, the resume procedure was changed; instead of delaying the resume of the hardware until the first use, now waking up immediately at resume. This is for buggy BIOS. For ASoC, dynamic PCM support and the improved support for digital links between off-SoC devices are major framework changes. Some highlights are below: * HD-audio - Avoid accesses of invalid pin-control bits that may stall the codec - V-ref setup cleanups - Fix the races in power-saving code - Fix the races in codec cache hashes and connection lists - Split some common codes for BIOS auto-parser to hda_auto_parser.c - Changed the PM resume code to wake up immediately for buggy BIOS - Creative SoundCore3D support - Add Conexant CX20751/2/3/4 codec support * ASoC - Dynamic PCM support, allowing support for SoCs with internal routing through components with tight sequencing and formatting constraints within their internal paths or where there are multiple components connected with CPU managed DMA controllers inside the SoC. - Greatly improved support for direct digital links between off-SoC devices, providing a much simpler way of connecting things like digital basebands to CODECs. - Much more fine grained and robust locking, cleaning up some of the confusion that crept in with multi-component. - CPU support for nVidia Tegra 30 I2S and audio hub controllers and ST-Ericsson MSP I2S controolers - New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124, Texas Instruments LM49453. - Some regmap changes needed by the Tegra I2S driver. - mc13783 audio support. * Misc - Rewrite with module_pci_driver() - Xonar DGX support for snd-oxygen - Improvement of packet handling in snd-firewire driver - New USB-endpoint streaming logic - Enhanced M-audio FTU quirks and relevant cleanups - Increment the support of OSS devices to 256 - snd-aloop accuracy improvement There are a few more pending changes for 3.5, but they will be sent slightly later as partly depending on the changes of DRM." Fix up conflicts in regmap (due to duplicate patches, with some further updates then having already come in from the regmap tree). Also some fairly trivial context conflicts in the imx and mcx soc drivers. * tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits) ALSA: snd-usb: fix stream info output in /proc ALSA: pcm - Add proper state checks to snd_pcm_drain() ALSA: sh: Fix up namespace collision in sh_dac_audio. ALSA: hda/realtek - Fix unused variable compile warning ASoC: sh: fsi: enable chip specific data transfer mode ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger() ASoC: sh: fsi: use same format for IN/OUT ASoC: sh: fsi: add fsi_version() and removed meaningless version check ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC ASoC: tegra: Add machine driver for WM8753 codec ALSA: hda - Fix possible races of accesses to connection list array ASoC: OMAP: HDMI: Introduce codec ARM: mx31_3ds: Add sound support ASoC: imx-mc13783 cleanup mx31moboard: Add sound support ASoC: mc13783 codec cleanups ASoC: add imx-mc13783 sound support ASoC: Add mc13783 codec mfd: mc13xxx: add codec platform data ASoC: don't flip master of DT-instantiated DAI links ...
2012-05-23mfd: Fix twl6040 build failureSamuel Ortiz1-1/+15
Without it we get: CC drivers/mfd/twl6040-core.o drivers/mfd/twl6040-core.c: In function ‘twl6040_has_vibra’: drivers/mfd/twl6040-core.c:55:2: error: implicit declaration of function ‘of_find_node_by_name’ [-Werror=implicit-function-declaration] Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-23mfd: ab8500-core should depend on MFD_DB8500_PRCMULee Jones1-1/+1
A recent move to eliminate excess historical baggage from ab8500 core code resulting in errors when building with x86_64 allmodconfig: In file included from drivers/mfd/ab8500-core.c:21:0: include/linux/mfd/dbx500-prcmu.h:614:19: error: redefinition of 'prcmu_abb_read' include/linux/mfd/db8500-prcmu.h:673:19: note: previous definition of 'prcmu_abb_read' was here include/linux/mfd/dbx500-prcmu.h:619:19: error: redefinition of 'prcmu_abb_write' include/linux/mfd/db8500-prcmu.h:678:19: note: previous definition of 'prcmu_abb_write' was here include/linux/mfd/dbx500-prcmu.h:630:19: error: redefinition of 'prcmu_config_clkout' include/linux/mfd/db8500-prcmu.h:643:19: note: previous definition of 'prcmu_config_clkout' was here include/linux/mfd/dbx500-prcmu.h:692:20: error: redefinition of 'prcmu_ac_wake_req' include/linux/mfd/db8500-prcmu.h:683:20: note: previous definition of 'prcmu_ac_wake_req' was here include/linux/mfd/dbx500-prcmu.h:694:20: error: redefinition of 'prcmu_ac_sleep_req' include/linux/mfd/db8500-prcmu.h:685:20: note: previous definition of 'prcmu_ac_sleep_req' was here Problem: When CONFIG_AB8500_CORE is set, building ab8500-core.c and !(CONFIG_UX500_SOC_DB8500 | CONFIG_MFD_DB8500_PRCMU), both db8500-prcmu.h and dbx500-prcmu.h take it upon themselves to _both_ create 'return 0' inline functions for the following: prcmu_abb_read() prcmu_abb_write() prcmu_config_clkout() prcmu_ac_wake_req() prcmu_ac_sleep_req() Solution: Depend on MFD_DB8500_PRCMU, which in turn depends on UX500_SOC_DB8500. Reported-By: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-23regmap: Use select .. if to get IRQ_DOMAIN enabledMark Brown1-3/+0
Ensure that we can't get randconfig breakage by doing the IRQ_DOMAIN select automatically. Don't just do the select from REGMAP_IRQ to ensure that the select actually gets noticed. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-05-22Merge branch 'for-linus' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial updates from Jiri Kosina: "As usual, it's mostly typo fixes, redundant code elimination and some documentation updates." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (57 commits) edac, mips: don't change code that has been removed in edac/mips tree xtensa: Change mail addresses of Hannes Weiner and Oskar Schirmer lib: Change mail address of Oskar Schirmer net: Change mail address of Oskar Schirmer arm/m68k: Change mail address of Sebastian Hess i2c: Change mail address of Oskar Schirmer net: Fix tcp_build_and_update_options comment in struct tcp_sock atomic64_32.h: fix parameter naming mismatch Kconfig: replace "--- help ---" with "---help---" c2port: fix bogus Kconfig "default no" edac: Fix spelling errors. qla1280: Remove redundant NULL check before release_firmware() call remoteproc: remove redundant NULL check before release_firmware() qla2xxx: Remove redundant NULL check before release_firmware() call. aic94xx: Get rid of redundant NULL check before release_firmware() call tehuti: delete redundant NULL check before release_firmware() qlogic: get rid of a redundant test for NULL before call to release_firmware() bna: remove redundant NULL test before release_firmware() tg3: remove redundant NULL test before release_firmware() call typhoon: get rid of redundant conditional before all to release_firmware() ...
2012-05-22mfd: Remove the parsing of dt info for tps65910 gpioLaxman Dewangan1-15/+0
Remove the parsing of device node information for sub devices from core file. The sub devices will parse the information as per the sub-devices specific information. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-22mfd: Save device node parsed platform data for tps65910 sub devicesLaxman Dewangan1-1/+5
Save the allocated memory to store the parsed device node information to the global device structure so that sub devices can directly use this pointer. In this way, the sub devices does not require to re-allocate the memory for storing the sub-devices specific device node information. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-22Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds6-2749/+0
Pull first batch of arm-soc cleanups from Olof Johansson: "These cleanups are basically all over the place. The idea is to collect changes with minimal impact but large number of changes so we can avoid them from distracting in the diffstat in the other series. A significant number of lines get removed here, in particular because the ixp2000 and ixp23xx platforms get removed. These have never been extremely popular and have fallen into disuse over time with no active maintainer taking care of them. The u5500 soc never made it into a product, so we are removing it from the ux500 platform. Many good cleanups also went into the at91 and omap platforms, as has been the case for a number of releases." Trivial modify-delete conflicts in arch/arm/mach-{ixp2000,ixp23xx} * tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (152 commits) ARM: clps711x: Cleanup IRQ handling ARM clps711x: Removed unused header mach/time.h ARM: clps711x: Added note about support EP731x CPU to Kconfig ARM: clps711x: Added missing register definitions ARM: clps711x: Used own subarch directory for store header file Dove: Fix Section mismatch warnings ARM: orion5x: ts78xx debugging changes ARM: orion5x: remove PM dependency from ts78xx ARM: orion5x: ts78xx fix NAND resource off by one ARM: orion5x: ts78xx whitespace cleanups Orion5x: Fix Section mismatch warnings Orion5x: Fix warning: struct pci_dev declared inside paramter list ARM: clps711x: Combine header files into one for clps711x-targets ARM: S3C24XX: Use common macro to define resources on mach-qt2410.c ARM: S3C24XX: Use common macro to define resources on mach-osiris.c ARM: EXYNOS: Adapt to cpuidle core time keeping and irq enable ARM: S5PV210: Use common macro to define resources on mach-smdkv210.c ARM: S5PV210: Use common macro to define resources on dev-audio.c ARM: S5PC100: Use common macro to define resources on dev-audio.c ARM: S5P64X0: Use common macro to define resources on dev-audio.c ...
2012-05-21Merge tag 'regulator-3.5' of ↵Linus Torvalds4-18/+87
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "The major thing here is the addition of some helpers to factor code out of drivers, making a fair proportion of regulators much more just data rather than code which is nice. - Helpers in the core for regulators using regmap, providing generic implementations of the enable and voltage selection operations which just need data to describe them in the drivers. - Split out voltage mapping and voltage setting, allowing many more drivers to take advantage of the infrastructure for selectors. - Loads and loads of cleanups from Axel Lin once again, including many changes to take advantage of the above new framework features - New drivers for Ricoh RC5T583, TI TPS62362, TI TPS62363, TI TPS65913, TI TWL6035 and TI TWL6037. Some of the registration changes to support the core refactoring caused so many conflicts that eventually topic branches were abandoned for this release." * tag 'regulator-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (227 commits) regulator: tps65910: use of_node of matched regulator being register regulator: tps65910: dt: support when "regulators" node found regulator: tps65910: add error message in case of failure regulator: tps62360: dt: initialize of_node param for regulator register. regulator: tps65910: use devm_* for memory allocation regulator: tps65910: use small letter for regulator names mfd: tpx6586x: Depend on regulator regulator: regulator for Palmas Kconfig regulator: regulator driver for Palmas series chips regulator: Enable Device Tree for the db8500-prcmu regulator driver regulator: db8500-prcmu: Separate regulator registration from probe regulator: ab3100: Use regulator_map_voltage_iterate() regulator: tps65217: Convert to set_voltage_sel and map_voltage regulator: Enable the ab8500 for Device Tree regulator: ab8500: Split up probe() into manageable pieces regulator: max8925: Remove check_range function and max_uV from struct rc5t583_regulator_info regulator: max8649: Remove unused check_range() function regulator: rc5t583: Remove max_uV from struct rc5t583_regulator_info regulator: da9052: Convert to set_voltage_sel and map_voltage regulator: max8952: Use devm_kzalloc ...
2012-05-20mfd: Emulate active low IRQs as well as active high IRQs for wm831xMark Brown1-5/+19
As with the existing emulation this should not be used in production systems but is useful for test purposes. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Mark two lm3533 zone registers as volatileJohan Hovold1-1/+1
Mark the two currently unused zone registers as volatile in regmap for completeness. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Fix return type of lm533 attribute is_visibleJohan Hovold1-1/+1
Since commit 587a1f1659 ("switch ->is_visible() to returning umode_t") the return type of is_visible is umode_t rather than mode_t. This silences a compiler warning on some architectures where these types are not compatible. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Enable Device Tree support in the ab8500-sysctrl driverLee Jones1-0/+6
This patch ensures probing of the ab8500-sysctrl driver during a DT enabled boot, so long as the associated nodes are present in the Device Tree binary. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Add support for Device Tree to twl6040Peter Ujfalusi2-8/+25
Device tree based probing support for the core twl6040 driver. Child devices will be created as MFD devices: - ASoC codec is always created - Vibra child is only created if the vibra section present in the DT blob. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Register the twl6040 child for the ASoC codec unconditionallyPeter Ujfalusi1-20/+19
The main function of the twl6040 is to provide audio on OMAP4+ platforms. Since the ASoC codec driver can work without the pdata we can register the child to load the codec driver whenever the twl6040 MFD driver is loaded. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Allocate twl6040 IRQ numbers dynamicallyPeter Ujfalusi2-4/+12
Use irq_alloc_descs() to get the IRQ number range dynamically instead of the hardwired use if pdata->irq_base. The twl6040 only provides interrupts for it's internal components which means that it is not working as an IRQ expander type of device. The client drivers will receive their interrupt numbers as resource which is configured based on the received IRQ range we got from irq_alloc_descs() Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: twl6040 code cleanup in interrupt initialization partPeter Ujfalusi1-9/+8
No functional change, just to make the code a bit more uniform and remove wrapped lines. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Enable ab8500-gpadc driver for Device TreeLee Jones1-0/+6
This patch will allow the ab8500-gpadc driver to be probed during Device Tree enabled boot. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Prevent unassigned pointer from being used in ab8500-gpadc driverLee Jones1-1/+1
Before this patch if probe failed to find the platform IRQ it would attempt to print a message out using dev_err, which in turn was being passed an unassigned pointer. This patch ensures the information passed to dev_err is correct. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Enable ab8500-debug when Device Tree is enabledLee Jones1-0/+6
Allow the ab8500-debugfs driver to be probed during DT start-up. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Enable Device Tree for ab8500-core driverLee Jones1-21/+50
This patch will allow the ab8500-core driver to be probed and set up when booting when Device Tree is enabled. This includes platform ID look-up which identifies the machine it is currently running on. If we are undergoing a DT enabled boot, we will refuse to setup each of the other ab8500-* devices, as they will be probed individually by DT. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Remove confusing ab8500-i2c file and merge into ab8500-coreLee Jones3-168/+102
ab8500-i2c is used as core code to register the ab8500 device. After allocating ab8500 memory, it immediately calls into ab8500-core where the real initialisation takes place. This patch moves all core registration and memory allocation into the true ab8500-core file and removes ab8500-i2c completely. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: mc13xxx core should not be user visibleMark Brown1-9/+7
Since the core is not usable without one of the bus modules it should not be presented in the UI but should instead be selected by the bus modules. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Fix double free in wm8350 error pathJohan Hovold1-9/+1
Fix double free in probe error path introduced by the recent conversion of wm8350 to use regmap. Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Convert lm3533 to use devresJohan Hovold1-17/+5
Use devres to manage core driver data and regmap. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Add ADC support to the DA9052/53 coreAshish Jangam1-0/+140
This patch adds ADC support to the DA9052/53 core. Tested on smdkv6410 and i.mx53 QS boards. Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Add tps65910-irq devicetree init and irqdomain supportRhyland Klein2-34/+63
This change changes the tps65910-irq code to use irqdomain, and support initialization from devicetree. This assumes that the irq_base in the platform data is -1 if devicetree is used. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Make anatop register accessor more flexible and rename meaningfullyRichard Zhao1-24/+11
- rename to anatop_read_reg and anatop_write_reg - anatop_read_reg directly return reg value - anatop_write_reg write reg with mask Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Reviewed-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: wm8400 needs to depend on I2C=yMark Brown1-1/+1
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Convert wm831x to irq_domainMark Brown4-50/+78
The modern idiom is to use irq_domain to allocate interrupts. This is useful partly to allow further infrastructure to be based on the domains and partly because it makes it much easier to allocate virtual interrupts to devices as we don't need to allocate a contiguous range of interrupt numbers. Convert the wm831x driver over to this infrastructure, using a legacy IRQ mapping if an irq_base is specified in platform data and otherwise using a linear mapping, always registering the interrupts even if they won't ever be used. Only boards which need to use the GPIOs as interrupts should need to use an irq_base. This means that we can't use the MFD irq_base management since the unless we're using an explicit irq_base from platform data we can't rely on a linear mapping of interrupts. Instead we need to map things via the irq_domain - provide a conveniencem function wm831x_irq() to save a small amount of typing when doing so. Looking at this I couldn't clearly see anything the MFD core could do to make this nicer. Since we're not supporting device tree yet there's no meaningful advantage if we don't do this conversion in one, the fact that the interrupt resources are used for repeated IP blocks makes accessor functions for the irq_domain more trouble to do than they're worth. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Don't try to flag IRQ 0 as a wm831x wake sourceMark Brown1-11/+12
If we've not got a primary IRQ we shouldn't be trying to flag IRQ 0 as a wake source. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Add MAX77693 irq handlerChanwoo Choi3-1/+342
This patch supports IRQ handling for MAX77693. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Add MAX77693 driverChanwoo Choi3-0/+230
This patch adds MFD driver for MAX77693 to enable its sub devices. The MAX77693 is a multi-function devices. It includes PMIC, MUIC(Micro USB Interface Controller), flash LED control and haptic motor control. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Export wm8400_block_read()Mark Brown1-0/+1
Used by the regulator driver. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Don't support non-modular wm8400 buildMark Brown1-1/+1
It's relying on non-exported symbols. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Silence an lm3533 gcc warningDan Carpenter1-1/+1
This is supposed to be umode_t. It causes a GCC warning: drivers/mfd/lm3533-core.c:440:2: warning: initialization from incompatible pointer type [enabled by default] drivers/mfd/lm3533-core.c:440:2: warning: (near initialization for ‘lm3533_attribute_group.is_visible’) [enabled by default] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Convert pcf50633-core to use devm_* APIsAxel Lin1-26/+10
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 02:47:08 +0000