summaryrefslogtreecommitdiff
path: root/drivers/i2c
AgeCommit message (Collapse)AuthorFilesLines
2013-12-12i2c: imx: Check the return value from clk_prepare_enable()Fabio Estevam1-1/+3
clk_prepare_enable() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-12-12i2c: mux: Inherit retry count and timeout from parent for muxed busElie De Brauwer1-0/+2
If a muxed i2c bus gets created the default retry count and timeout of the muxed bus is zero. Hence it it possible that you end up with a situation where the parent controller sets a default retry count and timeout which gets applied and used while the muxed bus (using the same controller) has a default retry count of zero and a default timeout of 1s (set in i2c_add_adapter()). This can be solved by initializing the retry count and timeout of the muxed bus with the values used by the the parent at creation time. Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-29Merge branch 'i2c/for-current' of ↵Linus Torvalds5-13/+19
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some easy but needed fixes for i2c drivers since rc1" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: bcm2835: Linking platform nodes to adapter nodes i2c: omap: raw read and write endian fix i2c: i2c-bcm-kona: Fix module build i2c: i2c-diolan-u2c: different usb endpoints for DLN-2-U2C i2c: bcm-kona: remove duplicated include i2c: davinci: raw read and write endian fix
2013-11-28i2c: bcm2835: Linking platform nodes to adapter nodesFlorian Meier1-0/+1
In order to find I2C devices in the device tree, the platform nodes have to be known by the I2C core. This requires setting the dev.of_node parameter of the adapter. Signed-off-by: Florian Meier <florian.meier@koalo.de> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-27i2c: omap: raw read and write endian fixVictor Kamensky1-4/+4
All OMAP IP blocks expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-26i2c: i2c-bcm-kona: Fix module buildTim Kryger1-1/+1
Correct a typo that prevented the driver from being built as a module. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-26i2c: i2c-diolan-u2c: different usb endpoints for DLN-2-U2CMartin Vogt1-5/+11
The previous diolan adapter uses other out/in endpoints than the current DLN-2-U2C in compatibility mode. They changed from 0x2/0x84 to 0x3/0x83. This patch gets the endpoints from the usb interface, instead of hardcode them in the driver. This was tested on a current DLN-2-U2C board. Signed-off-by: Martin Vogt <mvogt1@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-26i2c: bcm-kona: remove duplicated includeWei Yongjun1-1/+0
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-26i2c: davinci: raw read and write endian fixTaras Kondratiuk1-2/+2
I2C IP block expect LE data, but CPU may operate in BE mode. Need to use endian neutral functions to read/write h/w registers. I.e instead of __raw_read[lw] and __raw_write[lw] functions code need to use read[lw]_relaxed and write[lw]_relaxed functions. If the first simply reads/writes register, the second will byteswap it if host operates in BE mode. Changes are trivial sed like replacement of __raw_xxx functions with xxx_relaxed variant. Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-25Merge tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of ↵Olof Johansson1-0/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few more fixes for issues found booting older omaps using device tree. Also few randconfig build fixes and removal of some dead code for omap4 as it no longer has legacy platform data based booting support. * tag 'omap-for-v3.13/more-fixes-for-merge-window-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init ARM: OMAP2+: Remove legacy mux code for display.c ARM: OMAP2+: Fix undefined reference to set_cntfreq gpio: twl4030: Fix passing of pdata in the device tree case gpio: twl4030: Fix regression for twl gpio output ARM: OMAP2+: More randconfig fixes for reconfigure_io_chain ARM: dts: Fix omap2 specific dtsi files by adding the missing entries ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x i2c: omap: Fix missing device tree flags for omap2
2013-11-20Merge tag 'pm+acpi-2-3.13-rc1' of ↵Linus Torvalds1-6/+19
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: - ACPI-based device hotplug fixes for issues introduced recently and a fix for an older error code path bug in the ACPI PCI host bridge driver - Fix for recently broken OMAP cpufreq build from Viresh Kumar - Fix for a recent hibernation regression related to s2disk - Fix for a locking-related regression in the ACPI EC driver from Puneet Kumar - System suspend error code path fix related to runtime PM and runtime PM documentation update from Ulf Hansson - cpufreq's conservative governor fix from Xiaoguang Chen - New processor IDs for intel_idle and turbostat and removal of an obsolete Kconfig option from Len Brown - New device IDs for the ACPI LPSS (Low-Power Subsystem) driver and ACPI-based PCI hotplug (ACPIPHP) cleanup from Mika Westerberg - Removal of several ACPI video DMI blacklist entries that are not necessary any more from Aaron Lu - Rework of the ACPI companion representation in struct device and code cleanup related to that change from Rafael J Wysocki, Lan Tianyu and Jarkko Nikula - Fixes for assigning names to ACPI-enumerated I2C and SPI devices from Jarkko Nikula * tag 'pm+acpi-2-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits) PCI / hotplug / ACPI: Drop unused acpiphp_debug declaration ACPI / scan: Set flags.match_driver in acpi_bus_scan_fixed() ACPI / PCI root: Clear driver_data before failing enumeration ACPI / hotplug: Fix PCI host bridge hot removal ACPI / hotplug: Fix acpi_bus_get_device() return value check cpufreq: governor: Remove fossil comment in the cpufreq_governor_dbs() ACPI / video: clean up DMI table for initial black screen problem ACPI / EC: Ensure lock is acquired before accessing ec struct members PM / Hibernate: Do not crash kernel in free_basic_memory_bitmaps() ACPI / AC: Remove struct acpi_device pointer from struct acpi_ac spi: Use stable dev_name for ACPI enumerated SPI slaves i2c: Use stable dev_name for ACPI enumerated I2C slaves ACPI: Provide acpi_dev_name accessor for struct acpi_device device name ACPI / bind: Use (put|get)_device() on ACPI device objects too ACPI: Eliminate the DEVICE_ACPI_HANDLE() macro ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_node cpufreq: OMAP: Fix compilation error 'r & ret undeclared' PM / Runtime: Fix error path for prepare PM / Runtime: Update documentation around probe|remove|suspend cpufreq: conservative: set requested_freq to policy max when it is over policy max ...
2013-11-18Merge branch 'i2c/for-next' of ↵Linus Torvalds27-194/+2918
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c changes from Wolfram Sang: - new drivers for exynos5, bcm kona, and st micro - bigger overhauls for drivers mxs and rcar - typical driver bugfixes, cleanups, improvements - got rid of the superfluous 'driver' member in i2c_client struct This touches a few drivers in other subsystems. All acked. * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits) i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe() i2c: i2c-eg20t: do not print error message in syslog if no ACK received i2c: bcm-kona: Introduce Broadcom I2C Driver i2c: cbus-gpio: Fix device tree binding i2c: wmt: add missing clk_disable_unprepare() on error i2c: designware: add new ACPI IDs i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH i2c: exynos5: Remove incorrect clk_disable_unprepare i2c: i2c-st: Add ST I2C controller i2c: exynos5: add High Speed I2C controller driver i2c: rcar: fixup rcar type naming i2c: scmi: remove some bogus NULL checks i2c: sh_mobile & rcar: Enable the driver on all ARM platforms i2c: sh_mobile: Convert to clk_prepare/unprepare i2c: mux: gpio: use reg value for i2c_add_mux_adapter i2c: mux: gpio: use gpio_set_value_cansleep() i2c: Include linux/of.h header i2c: mxs: Fix PIO mode on i.MX23 i2c: mxs: Rework the PIO mode operation i2c: mxs: distinguish i.MX23 and i.MX28 based I2C controller ...
2013-11-18i2c: bcm-kona: fix error return code in bcm_kona_i2c_probe()Wei Yongjun1-1/+2
Fix to return a negative error code from the bus speed parse error handling case instead of 0. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Reviewed-by: Tim Kryger <tim.kryger@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-17i2c: i2c-eg20t: do not print error message in syslog if no ACK receivedAndreas Werner1-22/+4
Using the i2c-eg20t driver and call i2cdetect or probe on the bus, the driver will print a lot of error messages if there was no ACK received. i2cdetect normally print a table with all the available devices. If there is no device on the address, the table will be empty. Currently with the i2c-eg20t driver, the table is not visible because the error messages destroy the table. Error message: pch_i2c_getack return -71 This patch prevent the driver to print the messages to syslog. The pch_i2c_wait_for_check_xfer function is the only one who is calling pch_i2c_getack, so we can delete the function and add the read to pch_i2c_wait_for_check_xfer. If no ACK is received, the Message will be printed as a dbg message. Fixed print message to be a one liner so we can grep for the error message. Tested on Intel Atom E6xx and Eg20t Chipset. Signed-off-by: Andreas Werner <wernerandy@gmx.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-15i2c: bcm-kona: Introduce Broadcom I2C DriverTim Kryger3-0/+919
Introduce support for Broadcom Serial Controller (BSC) I2C bus found in the Kona family of Mobile SoCs. FIFO hardware is utilized but only standard mode (100kHz), fast mode (400kHz), fast mode plus (1MHz), and I2C high-speed (3.4 MHz) bus speeds are supported. Signed-off-by: Tim Kryger <tim.kryger@linaro.org> Reviewed-by: Matt Porter <matt.porter@linaro.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> [wsa: fixed Kconfig sorting, squashed broken out patches into one] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-15i2c: omap: Fix missing device tree flags for omap2Tony Lindgren1-0/+22
As we claim to support device tree for mach-omap2, we should have the necessary flags in the driver to make it usable. Cc: linux-i2c@vger.kernel.org Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-11-15i2c: cbus-gpio: Fix device tree bindingTony Lindgren1-0/+2
Looks like we're missing two lines needed to make it work properly with device tree. Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-15tree-wide: use reinit_completion instead of INIT_COMPLETIONWolfram Sang9-10/+10
Use this new function to make code more comprehensible, since we are reinitialzing the completion, not initializing. [akpm@linux-foundation.org: linux-next resyncs] Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-14i2c: Use stable dev_name for ACPI enumerated I2C slavesJarkko Nikula1-4/+17
Current I2C adapter id - client address "x-00yy" based device naming scheme is not always stable enough to be used in name based matching, for instance within ALSA SoC subsystem. This is problematic in PC kind of platforms where I2C adapter numbers can change due variable amount of bus controllers, probe order, add-on cards or just because of BIOS settings. This patch addresses the problem by using the ACPI device name with "i2c-" prefix for ACPI enumerated I2C slaves. For them device name "x-00yz" becomes "i2c-INTABCD:ij" after this patch. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-14ACPI / driver core: Store an ACPI device pointer in struct acpi_dev_nodeRafael J. Wysocki1-2/+2
Modify struct acpi_dev_node to contain a pointer to struct acpi_device associated with the given device object (that is, its ACPI companion device) instead of an ACPI handle corresponding to it. Introduce two new macros for manipulating that pointer in a CONFIG_ACPI-safe way, ACPI_COMPANION() and ACPI_COMPANION_SET(), and rework the ACPI_HANDLE() macro to take the above changes into account. Drop the ACPI_HANDLE_SET() macro entirely and rework its users to use ACPI_COMPANION_SET() instead. For some of them who used to pass the result of acpi_get_child() directly to ACPI_HANDLE_SET() introduce a helper routine acpi_preset_companion() doing an equivalent thing. The main motivation for doing this is that there are things represented by struct acpi_device objects that don't have valid ACPI handles (so called fixed ACPI hardware features, such as power and sleep buttons) and we would like to create platform device objects for them and "glue" them to their ACPI companions in the usual way (which currently is impossible due to the lack of valid ACPI handles). However, there are more reasons why it may be useful. First, struct acpi_device pointers allow of much better type checking than void pointers which are ACPI handles, so it should be more difficult to write buggy code using modified struct acpi_dev_node and the new macros. Second, the change should help to reduce (over time) the number of places in which the result of ACPI_HANDLE() is passed to acpi_bus_get_device() in order to obtain a pointer to the struct acpi_device associated with the given "physical" device, because now that pointer is returned by ACPI_COMPANION() directly. Finally, the change should make it easier to write generic code that will build both for CONFIG_ACPI set and unset without adding explicit compiler directives to it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> # on Haswell Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Aaron Lu <aaron.lu@intel.com> # for ATA and SDIO part
2013-11-14i2c: wmt: add missing clk_disable_unprepare() on errorWei Yongjun1-0/+1
Add the missing clk_disable_unprepare() before return from wmt_i2c_reset_hardware() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org # 3.11+
2013-11-14i2c: designware: add new ACPI IDsMika Westerberg1-0/+2
Newer Intel PCHs with LPSS have the same Designware I2C controllers than Haswell but the ACPI IDs differ. Add these IDs to the driver list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-14i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCHJames Ralston2-0/+4
This patch adds the SMBus Device IDs for the Intel Wildcat Point-LP PCH. Signed-off-by: James Ralston <james.d.ralston@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-14i2c: exynos5: Remove incorrect clk_disable_unprepareSachin Kamat1-5/+0
clk_disable_unprepare in remove causes an imbalance and hence gives the below crash on module remove. While at it also remove some duplicate code from probe. / $ rmmod i2c-exynos5 [ 6.996374] ------------[ cut here ]------------ [ 6.999523] WARNING: CPU: 2 PID: 1137 at drivers/clk/clk.c:842 clk_disable+0x18/0x24() [ 7.007403] Modules linked in: i2c_exynos5(-) [ 7.011747] CPU: 2 PID: 1137 Comm: rmmod Not tainted 3.12.0-next-20131105-00083-g16f4799-dirty #21 [ 7.020696] [<c0014e0c>] (unwind_backtrace+0x0/0xf4) from [<c0011784>] (show_stack+0x10/0x14) [ 7.029190] [<c0011784>] (show_stack+0x10/0x14) from [<c037acd4>] (dump_stack+0x7c/0xb0) [ 7.037255] [<c037acd4>] (dump_stack+0x7c/0xb0) from [<c001e0ac>] (warn_slowpath_common+0x6c/0x88) [ 7.046190] [<c001e0ac>] (warn_slowpath_common+0x6c/0x88) from [<c001e164>] (warn_slowpath_null+0x1c/0x24) [ 7.055818] [<c001e164>] (warn_slowpath_null+0x1c/0x24) from [<c02dcde4>] (clk_disable+0x18/0x24) [ 7.064670] [<c02dcde4>] (clk_disable+0x18/0x24) from [<bf0002d4>] (exynos5_i2c_remove+0x1c/0x34 [i2c_exynos5]) [ 7.074736] [<bf0002d4>] (exynos5_i2c_remove+0x1c/0x34 [i2c_exynos5]) from [<c02274a8>] (__device_release_driver+0x58/0xb0) [ 7.085836] [<c02274a8>] (__device_release_driver+0x58/0xb0) from [<c0227b88>] (driver_detach+0xac/0xb0) [ 7.095291] [<c0227b88>] (driver_detach+0xac/0xb0) from [<c02271c0>] (bus_remove_driver+0x4c/0xa0) [ 7.104227] [<c02271c0>] (bus_remove_driver+0x4c/0xa0) from [<c00725dc>] (SyS_delete_module+0x124/0x194) [ 7.113682] [<c00725dc>] (SyS_delete_module+0x124/0x194) from [<c000e2e0>] (ret_fast_syscall+0x0/0x30) [ 7.122957] ---[ end trace 23bb6e4e0bf52196 ]--- Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-14i2c: i2c-st: Add ST I2C controllerMaxime COQUELIN3-0/+883
This patch adds support to SSC (Synchronous Serial Controller) I2C driver. This IP also supports SPI protocol, but this is not the aim of this driver. This IP is embedded in all ST SoCs for Set-top box platorms, and supports I2C Standard and Fast modes. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-14Merge tag 'pm+acpi-3.13-rc1' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael J Wysocki: - New power capping framework and the the Intel Running Average Power Limit (RAPL) driver using it from Srinivas Pandruvada and Jacob Pan. - Addition of the in-kernel switching feature to the arm_big_little cpufreq driver from Viresh Kumar and Nicolas Pitre. - cpufreq support for iMac G5 from Aaro Koskinen. - Baytrail processors support for intel_pstate from Dirk Brandewie. - cpufreq support for Midway/ECX-2000 from Mark Langsdorf. - ARM vexpress/TC2 cpufreq support from Sudeep KarkadaNagesha. - ACPI power management support for the I2C and SPI bus types from Mika Westerberg and Lv Zheng. - cpufreq core fixes and cleanups from Viresh Kumar, Srivatsa S Bhat, Stratos Karafotis, Xiaoguang Chen, Lan Tianyu. - cpufreq drivers updates (mostly fixes and cleanups) from Viresh Kumar, Aaro Koskinen, Jungseok Lee, Sudeep KarkadaNagesha, Lukasz Majewski, Manish Badarkhe, Hans-Christian Egtvedt, Evgeny Kapaev. - intel_pstate updates from Dirk Brandewie and Adrian Huang. - ACPICA update to version 20130927 includig fixes and cleanups and some reduction of divergences between the ACPICA code in the kernel and ACPICA upstream in order to improve the automatic ACPICA patch generation process. From Bob Moore, Lv Zheng, Tomasz Nowicki, Naresh Bhat, Bjorn Helgaas, David E Box. - ACPI IPMI driver fixes and cleanups from Lv Zheng. - ACPI hotplug fixes and cleanups from Bjorn Helgaas, Toshi Kani, Zhang Yanfei, Rafael J Wysocki. - Conversion of the ACPI AC driver to the platform bus type and multiple driver fixes and cleanups related to ACPI from Zhang Rui. - ACPI processor driver fixes and cleanups from Hanjun Guo, Jiang Liu, Bartlomiej Zolnierkiewicz, Mathieu Rhéaume, Rafael J Wysocki. - Fixes and cleanups and new blacklist entries related to the ACPI video support from Aaron Lu, Felipe Contreras, Lennart Poettering, Kirill Tkhai. - cpuidle core cleanups from Viresh Kumar and Lorenzo Pieralisi. - cpuidle drivers fixes and cleanups from Daniel Lezcano, Jingoo Han, Bartlomiej Zolnierkiewicz, Prarit Bhargava. - devfreq updates from Sachin Kamat, Dan Carpenter, Manish Badarkhe. - Operation Performance Points (OPP) core updates from Nishanth Menon. - Runtime power management core fix from Rafael J Wysocki and update from Ulf Hansson. - Hibernation fixes from Aaron Lu and Rafael J Wysocki. - Device suspend/resume lockup detection mechanism from Benoit Goby. - Removal of unused proc directories created for various ACPI drivers from Lan Tianyu. - ACPI LPSS driver fix and new device IDs for the ACPI platform scan handler from Heikki Krogerus and Jarkko Nikula. - New ACPI _OSI blacklist entry for Toshiba NB100 from Levente Kurusa. - Assorted fixes and cleanups related to ACPI from Andy Shevchenko, Al Stone, Bartlomiej Zolnierkiewicz, Colin Ian King, Dan Carpenter, Felipe Contreras, Jianguo Wu, Lan Tianyu, Yinghai Lu, Mathias Krause, Liu Chuansheng. - Assorted PM fixes and cleanups from Andy Shevchenko, Thierry Reding, Jean-Christophe Plagniol-Villard. * tag 'pm+acpi-3.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (386 commits) cpufreq: conservative: fix requested_freq reduction issue ACPI / hotplug: Consolidate deferred execution of ACPI hotplug routines PM / runtime: Use pm_runtime_put_sync() in __device_release_driver() ACPI / event: remove unneeded NULL pointer check Revert "ACPI / video: Ignore BIOS initial backlight value for HP 250 G1" ACPI / video: Quirk initial backlight level 0 ACPI / video: Fix initial level validity test intel_pstate: skip the driver if ACPI has power mgmt option PM / hibernate: Avoid overflow in hibernate_preallocate_memory() ACPI / hotplug: Do not execute "insert in progress" _OST ACPI / hotplug: Carry out PCI root eject directly ACPI / hotplug: Merge device hot-removal routines ACPI / hotplug: Make acpi_bus_hot_remove_device() internal ACPI / hotplug: Simplify device ejection routines ACPI / hotplug: Fix handle_root_bridge_removal() ACPI / hotplug: Refuse to hot-remove all objects with disabled hotplug ACPI / scan: Start matching drivers after trying scan handlers ACPI: Remove acpi_pci_slot_init() headers from internal.h ACPI / blacklist: fix name of ThinkPad Edge E530 PowerCap: Fix build error with option -Werror=format-security ... Conflicts: arch/arm/mach-omap2/opp.c drivers/Kconfig drivers/spi/spi.c
2013-11-07Merge remote-tracking branch 'grant/devicetree/next' into for-nextRob Herring10-23/+35
2013-11-01i2c: exynos5: add High Speed I2C controller driverNaveen Krishna Ch3-0/+782
Adds support for High Speed I2C driver found in Exynos5 and later SoCs from Samsung. Driver only supports Device Tree method. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Taekgyun Ko <taeggyun.ko@samsung.com> Reviewed-by: Simon Glass <sjg@google.com> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> Signed-off-by: Andrew Bresticker <abrestic@google.com> [wsa: rebased to v3.12-rc4 (no of_i2c.h anymore)] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-01i2c: rcar: fixup rcar type namingKuninori Morimoto1-11/+11
b720423a2627f045133bec39a31fe2bc0dab86f3 (i2c: rcar: add rcar-H2 support) added R-Car H2 support on i2c-rcar. The R-Car I2C type is based on SoC generation (Gen1 = E1/M1/H1, Gen2 = E2/M2/H2), but added naming was H1/H2 instead of Gen1/Gen2. Gen1/Gen2 is better naming on this driver. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-11-01i2c: scmi: remove some bogus NULL checksDan Carpenter1-3/+3
"obj" can't be NULL here. We already know that "pkg->package.elements" gives us a valid pointer so the next pointer after that is also non-NULL. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-31i2c: sh_mobile & rcar: Enable the driver on all ARM platformsLaurent Pinchart1-2/+2
Renesas ARM platforms are transitioning from single-platform to multi-platform kernels using the new ARCH_SHMOBILE_MULTI. Make the driver available on all ARM platforms to enable it on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI, and increase build testing coverage with COMPILE_TEST. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-31i2c: sh_mobile: Convert to clk_prepare/unprepareLaurent Pinchart1-4/+4
Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and clk_disable_unprepare() to get ready for the migration to the common clock framework. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-30i2c: mux: gpio: use reg value for i2c_add_mux_adapterIonut Nicu1-2/+2
The i2c-mux driver requires that the chan_id parameter passed to the i2c_add_mux_adapter() function is equal to the reg value for that adapter: for_each_child_of_node(mux_dev->of_node, child) { ret = of_property_read_u32(child, "reg", &reg); if (ret) continue; if (chan_id == reg) { priv->adap.dev.of_node = child; break; } } The i2c-mux-gpio driver uses an internal logical index for chan_id when calling i2c_add_mux_adapter() instead of using the reg value. Because of this, there will problems in selecting the right adapter when the i2c-mux-gpio's index into mux->data.values doesn't match the reg value. An example of such a case: mux->data.values = { 1, 0 } For chan_id = 0, i2c-mux will bind the adapter to the of_node with reg = <0>, but when it will call the select() callback with chan_id set to 0, the i2c-mux-gpio will use it as an index into mux->data.values and it will actually select the bus with reg = <1>. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Acked-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2013-10-30i2c: mux: gpio: use gpio_set_value_cansleep()Ionut Nicu1-2/+2
Some gpio chips may have get/set operations that can sleep. gpio_set_value() only works for chips which do not sleep, for the others we will get a kernel warning. Using gpio_set_value_cansleep() will work for both chips that do sleep and those who don't. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2013-10-30i2c: Include linux/of.h headerSachin Kamat5-0/+5
'of_match_ptr' is defined in linux/of.h. Include it explicitly to avoid build breakage in the future. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-28Merge branch 'acpi-pm'Rafael J. Wysocki1-0/+5
* acpi-pm: spi: attach/detach SPI device to the ACPI power domain i2c: attach/detach I2C client device to the ACPI power domain ACPI / PM: allow child devices to ignore parent power state
2013-10-24of/irq: Use irq_of_parse_and_map()Thierry Reding1-1/+1
Replace some instances of of_irq_map_one()/irq_create_of_mapping() and of_irq_to_resource() by the simpler equivalent irq_of_parse_and_map(). Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Rob Herring <rob.herring@calxeda.com> [grant.likely: resolved conflicts with core code renames] Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-10-11i2c: attach/detach I2C client device to the ACPI power domainLv Zheng1-0/+5
If the I2C client device is enumerated from ACPI namespace it might have ACPI methods that needs to be called in order to transition the device to different power states (such as _PSx). Implement this for I2C client devices by checking if the device has an ACPI handle and if that's the case, attach it to the ACPI power domain. In addition we make sure that the device is fully powered when its ->probe() function gets called. For non-ACPI devices this patch is a no-op. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-10-10i2c: i2c-mux-pinctrl: use deferred probe when adapter not foundWolfram Sang1-2/+2
If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-arb-gpio-challenge: use deferred probe when adapter not foundWolfram Sang1-1/+1
If it is not there yet, it might appear later. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-mux-gpio: use deferred probingIonut Nicu1-2/+2
If the i2c-parent bus driver is not loaded, returning -ENODEV will force people to unload and then reload the module again to get it working. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-mux-gpio: don't ignore of_get_named_gpio errorsIonut Nicu1-3/+7
of_get_named_gpio could return -E_PROBE_DEFER or another error code. This error should be passed further instead of being ignored. Signed-off-by: Ionut Nicu <ioan.nicu.ext@nsn.com> Acked-by: Peter Korsgaard <peter.korsgaard@barco.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: omap: Clear ARDY bit twiceTaras Kondratiuk1-0/+3
Initially commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac "i2c-omap: Double clear of ARDY status in IRQ handler" added a workaround for undocumented errata ProDB0017052. But then commit 1d7afc95946487945cc7f5019b41255b72224b70 "i2c: omap: ack IRQ in parts" refactored code and missed one of ARDY clearings. So current code violates errata. It causes often i2c bus timeouts on my Pandaboard. This patch adds a second clearing in place. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
2013-10-10i2c: Not all adapters have a parentJean Delvare1-0/+3
The code in acpi_i2c_register_devices() assumes that all i2c adapters have a parent. This is not necessarily the case, for example the i2c-stub driver instantiate a virtual i2c adapter without a parent. Check for this to avoid a NULL pointer deference. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-stu300: replace platform_driver_probe to support deferred probingWolfram Sang1-6/+5
Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-mxs: replace platform_driver_probe to support deferred probingWolfram Sang1-1/+2
Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-imx: replace platform_driver_probe to support deferred probingWolfram Sang1-5/+6
Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-10i2c: i2c-designware-platdrv: replace platform_driver_probe to support ↵Wolfram Sang1-2/+3
deferred probing Subsystems like pinctrl and gpio rightfully make use of deferred probing at core level. Now, deferred drivers won't be retried if they don't have a .probe function specified in the driver struct. Fix this driver to have that, so the devices it supports won't get lost in a deferred probe. Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2013-10-09drivers: clean-up prom.h implicit includesRob Herring3-0/+5
Powerpc is a mess of implicit includes by prom.h. Add the necessary explicit includes to drivers in preparation of prom.h cleanup. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org>
2013-10-06i2c: mxs: Fix PIO mode on i.MX23Marek Vasut1-11/+29
The i.MX23 I2C controller is also capable of PIO, but needs a little harder push to behave. The controller needs to be reset after every PIO/DMA operation for some reason, otherwise in rare cases, the controller can hang or emit bytes onto the bus. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>