summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (51 commits) Input: appletouch - give up maintainership Input: dm355evm_kbd - switch to using sparse keymap library Input: wistron_btns - switch to using sparse keymap library Input: add generic support for sparse keymaps Input: fix memory leak in force feedback core Input: wistron - remove identification strings from DMI table Input: psmouse - remove identification strings from DMI tables Input: atkbd - remove identification strings from DMI table Input: i8042 - remove identification strings from DMI tables DMI: allow omitting ident strings in DMI tables Input: psmouse - do not carry DMI data around Input: matrix-keypad - switch to using dev_pm_ops Input: keyboard - fix lack of locking when traversing handler->h_list Input: gpio_keys - scan gpio state at probe and resume time Input: keyboard - add locking around event handling Input: usbtouchscreen - add support for ET&T TC5UH touchscreen controller Input: xpad - add two new Xbox 360 devices Input: polled device - do not start polling if interval is zero Input: polled device - schedule first poll immediately Input: add S3C24XX touchscreen driver ...
2009-12-07Merge branches 'bkl-removal', 'upstream' and 'upstream-fixes' into for-linusJiri Kosina8-17/+60
2009-12-03HID: add multi-input quirk for NextWindow Touchscreen.Peter Hutterer2-0/+4
These touchscreens are mounted onto HP TouchSmart and the Dell Studio One 19. Without a quirk they report a wrong button set and the x/y coordinates through ABS_Z/ABS_RX, confusing the higher levels (most notably X.Org's evdev driver). Device id 0x003 covers models 1900, 2150, and 2700 [1] though testing could only be performed on a model 1900. [1] http://www.nextwindow.com/nextwindow_support/latest_tech_info.html Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-02HID: add support for Acan FG-8100 barcode readerJiri Kosina3-0/+4
Acan FG-8100 barcode reader (0x04b4/0xbca1) has vendor ID of cypress and requires the same MIN/MAX swap descriptor quirk as other barcode readers from cypress. Reported-by: Stijn Ghesquiere <stijn@applesnail.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-25HID: make Media key on Logitech DiNovo Mini workJiri Kosina1-0/+20
Put proper mapping of Media key on Logitech DiNovo Mini. According to the specification from Logitech webpage, this key is intended to launch a Media center. Reported-by: Stefan Plattner <Stefan.Plattner@ilogs.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-23Input: do not overwrite the first part of phys stringMárton Németh1-1/+1
Use strlcat() to append a string to the previously created first part. Signed-off-by: Márton Németh <nm127@freemail.hu> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-11-13HID: support Logitech/3DConnexion SpaceTraveler and SpaceNavigatorJiri Kosina3-0/+17
These devices wrongly report their axes as relative instead of absolute. Fix this in up report descriptor of the device before it enters the parser. Reported-by: simon.windows@gmail.com Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-05HID: remove BKL from hiddev_ioctl_usage()Jiri Kosina1-5/+0
The race between ioctl and disconnect is guarded by low level hiddev device mutex (existancelock) since the commit 07903407 ("HID: hiddev cleanup -- handle all error conditions properly"), therefore we can remove the lock_kernel() from hiddev_ioctl_usage(). Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-05HID: fixup quirk for NCR devicesJiri Kosina2-2/+3
NCR devices are terminally broken by design -- they claim themselves to contain proper input applications in their HID report descriptor, but behave very badly if treated in standard way. According to NCR developers, the devices get confused when queried for reports in a standard way, rendering them unusable. NCR is shipping application called "RPSL" that can be used to drive these devices through hiddev, under the assumption that in-kernel driver doesn't perform initial report query. If it does, neither in-kernel nor hiddev-based driver can operate with these devices any more. Introduce a quirk that skips the report query for all NCR devices. The previous NOGET quirk was wrong and had been introduced because I misunderstood the nature of brokenness of these devices. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-11-04HID: pidff - fix unnecessary loop iterations on resetAnssi Hannula1-3/+2
When encountering a strange value in the pool report, pidff_reset will always refetch the report 20 times, even if one of the retries results in a sane value. This is because a temporary variable being used to store the value is not being updated inside the loop. Fix it by using the value directly in the loop. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-20HID: add NOGET quirk for another device from CH ProductsKeith Rutkowski2-0/+2
This patch was applied to Fedora 11's 2.6.30.8-64 kernel and adds the NOGET quirk for CH Products industrial class joystick(s). It is like the previous CH Products NOGET quirk patch for their consumer class joysticks. Without the quirk, the joystick would only be detected and would not function at all in kernels >= 2.6.29. It was tested with a CH Products 3-axis 5-button industrial joystick, product #HG-434IS000-U-217. Signed-off-by: Keith Rutkowski <rutkowski@signatureresearchinc.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-13HID: remove useless DRIVER_VERSION macroJiri Kosina2-4/+1
DRIVER_VERSION has no use whatosoever, it has been set to "2.6" for ages. Remove it. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-13HID: fix MODULE_AUTHOR usage in HID modulesJiri Kosina2-3/+6
Remove unused (in usbhid module) DRIVER_AUTHOR macrco and properly use multiple MODULE_AUTHOR() instances in both modules. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-13HID: blacklist Acer Ferrari 4005 optical mouseLamarque Vieira Souza1-0/+1
Marks Acer Bluetooth Optical Rechargeable Mouse from Ferrari 4005 notebook to be ignored by hid core. This change makes hid core to use input session instead of hid session with that mouse. With hid session the mouse cursor moves too laggy, using input session corrects this problem. Signed-off-by: Lamarque V. Souza <lamarque@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-13Merge branch 'for-linus' of ↵Linus Torvalds3-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: fix possible deadlock in hidraw_read HID: fix kerneldoc comment for hid_input_report() HID: add __init/__exit macros to twinhan.c
2009-10-12HID: fix possible deadlock in hidraw_readJiri Kosina1-3/+2
If the loop in hidraw_read() loops more than once, then we might end up trying to acquire already locked mutex, casuing a deadlock. Reported-by: iceberg <iceberg@ispras.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-10-04headers: remove sched.h from poll.hAlexey Dobriyan1-0/+1
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-01HID: fix kerneldoc comment for hid_input_report()Jiri Kosina1-1/+1
The kerneldoc comment for 'interrupt' has already confused a lot of people, as it is simply wrong. It doesn't carry the information about the context, but is used to distinguish between two fundamental types of low-level transport transfers -- interrupt vs. control. Make this clear in the comment. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-29HID: add __init/__exit macros to twinhan.cPeter Huewe1-2/+2
Trivial patch which adds the __init/__exit macros to the module_init/ module_exit functions of the twinhan driver in hid. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-22Merge branch 'for-linus' of ↵Linus Torvalds3-20/+17
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Remove duplicate Kconfig entry HID: consolidate connect and disconnect into core code HID: fix non-atomic allocation in hid_input_report
2009-09-19Driver-Core: extend devnode callbacks to provide permissionsKay Sievers1-2/+2
This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-17HID: Remove duplicate Kconfig entryAlessandro Guido1-7/+0
Signed-off-by: Alessandro Guido <ag@alessandroguido.name> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-17HID: consolidate connect and disconnect into core codeJiri Kosina2-11/+16
HID core registers input, hidraw and hiddev devices, but leaves unregistering it up to the individual driver, which is not really nice. Let's move all the logic to the core. Reported-by: Marcel Holtmann <marcel@holtmann.org> Reported-by: Brian Rogers <brian@xyzw.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-15HID: fix non-atomic allocation in hid_input_reportJiri Kosina1-2/+1
'interrupt' variable can't be used to safely determine whether we are running in atomic context or not, as we might be called from during control transfer completion through hid_ctrl() in atomic context with interrupt == 0. Reported-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-09-13Merge branches 'upstream', 'upstream-fixes' and 'debugfs' into for-linusJiri Kosina7-125/+413
2009-08-26HID: completely remove apple mightymouse from blacklistJan Scholz1-1/+0
Commit fa047e4f6fa63a6e9d0ae4d7749538830d14a343 "HID: fix inverted wheel for bluetooth version of apple mighty mouse" is incomplete. If we remove Apple MightyMouse (bluetooth version) from the list of apple_devices in drivers/hid/hid-apple.c we have to remove it from hid_blacklist in drivers/hid/hid-core.c as well. Signed-off-by: Jan Scholz <Scholz@fias.uni-frankfurt.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-20HID: support larger reports than 64 bytes in hiddevJiri Kosina1-1/+1
hiddev userspace driver uses a rignbuffer to store the parsed usages that should be returned through read(). This buffer is 64 bytes long, which is sufficient for queueing single USB 1.0 low-speed report, which is of maximum size 48 bytes. There are however USB HID devices which are full-speed USB devices, and therefore they are free to produce reports 64 bytes long. This is correctly handled by HID core, but read() on hiddev node gets stuck forever, because the ring buffer loops infinitely (as it is exactly 64 bytes long as well), never advancing the buffer pointer. Plus, the core driver is ready to handle highspeed devices, so we should be able to handle reports from such devices in the hiddev driver as well, which means we need larger ringbuffer. Reported-by: Michael Zeisel <michael.zeisel@philips.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-18HID: local function should be staticH Hartley Sweeten1-1/+2
__usbhid_submit_report() is a local function wrapped by the exported symbol usbhid_submit_report(). As such, it should be static. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-08HID: ignore Philips IEEE802.15.4 RF DongleHenning Glawe2-0/+4
This usb device claims to be of HID class, but is in fact a 802.15.4 lowpan transceiver, therefore the generic HID driver cannot operate this device. A separate driver for this device will be written for this using the new 802.15.4 stack. Signed-off-by: Henning Glawe <glaweh@debian.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-08HID: ignore all recent SoundGraph iMON devicesJarod Wilson2-10/+7
After some inspection of the Windows iMON driver, several additional device IDs were added to the lirc_imon driver. At least a few of these have been seen in the wild, and require manual quirking to keep the usbhid driver from binding to them. Rather than list out every single device, ignore the entire device ID range, 0x0034 - 0x0046. Some of these may not advertise themselves as HID devices, but no harm done to such devices anyway. Does the right thing in brief testing w/my 0x0045 device. Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Anssi Hannula <anssi.hannula@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-08HID: fix memory leak on error patch in debug codeJulia Lawall1-0/+1
Error handling code following a kzalloc should free the allocated data. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r exists@ local idexpression x; statement S; expression E; identifier f,f1,l; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } ( x->f1 = E | (x->f1 == NULL || ...) | f(...,x->f1,...) ) ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-08-08HID: fix overrun in quirks initializationRoel Kluin1-1/+1
Check whether index is within bounds before testing the element. declared in drivers/hid/usbhid/hid-core.c:62: static char *quirks_param[MAX_USBHID_BOOT_QUIRKS] = ... Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: Drop NULL test on list_entry resultJulia Lawall1-5/+0
list_entry, which is an alias for container_of, cannot return NULL, as there is no way to add a NULL value to a doubly linked list. A simplified version of the semantic match that findds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r@ expression x,E; statement S1,S2; position p,p1; @@ *x = list_entry@p(...) ... when != x = E *if@p1 (x == NULL) S1 else S2 // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: driver for Twinhan USB 6253:0100 remote controlBruno Premont5-0/+159
Add explicit key mappings for TwinHan USB HID remote control. All dummy Ctrl, Alt, Meta, ... key press/release events generated by the remote are silenced by "unmapping" them. This makes Power and Volume keys single-key and strips the regular (even while idle) key release events for Ctrl, Alt, Meta, ... Signed-off-by: Bruno Premont <bonbons@linux-vserver.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: adding __init/__exit macros to module init/exit functionsPeter Huewe24-48/+48
Trivial patch which adds the __init and __exit macros to the module_init / module_exit functions of several HID drivers from drivers/hid/ Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: add rumble support for Thrustmaster Dual Trigger 3-in-1Ruben Aos Garralda3-4/+10
This patch enables rumble in Thrustmaster Dual 3-in-1 trigger gamepads (in both PC and PS3 modes). It uses the same code as Thrustmaster FireStorm Dual Power 2, so it only adds new USB IDs to hid-core.c and hid-tmff.c Signed-off-by: Ruben Aos Garralda <rubenatch@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: ntrig tool separation and pen usagesRafi Rubin1-4/+29
When both touch and pen are active send a tool announcement before sending any status changes so that event users may differentiate which tool is changing. Restored three usage codes used by the pen. Signed-off-by: Rafi Rubin <rafi@seas.upenn.edu> Acked-by: Stephane Chatty <chatty@enac.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: Avoid double spin_lock_init on usbhid->lockSergey Senozhatsky1-1/+0
Avoid double spin_lock_init on usbhid->lock. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@mail.by> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: add force feedback support for Logitech WingMan Formula Force GPJiri Kosina5-0/+6
Add force feedback support for Logitech WingMan Formula Force GP (0x046d/0xc293). Reported-by: wylda@volny.cz Tested-by: wylda@volny.cz Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-23HID: Support new variants of Samsung USB IR receiver (0419:0001)Robert Schedel1-5/+34
This patch extends the existing Samsung IrDA (0419:0001) quirk file with newly reported variants: * New device variants with 203 byte and 135 byte report descriptors were reported to be recognized incorrectly. This patch adds an autodetection for those two, using report descriptor size to enable new quirks. * Any other unknown 0419:0001 variants will now be treated without any quirk flags (i.e. IGNORE_HIDINPUT/HIDDEV_FORCE will not be set by default anymore). More details: 1. Descriptor size 184 bytes ("Satelco bundled remote") Already supported since kernel 2.6.25 (my old patch). 2. Descriptor size 203 bytes ("Optronix remote") This receiver mostly works with the regular HID input driver. Only when some keys are released, another spurious key press event is interpreted due to incorrect array ranges. According to HID 1.11, section 6.2.2.5, arrays should return a 0 value when no control is asserted, and ranges should go from 1 to the number of elements. The patch clips the value with a logical range from 1..15 (instead of originally 0..18). Ticket with more information available at https://bugs.launchpad.net/bugs/326986 3. Descriptor size 135 bytes ("Gotview remote") This receiver has a similar issue than the previous one, i.e. it mostly works with regular HID input, except some key press events get stuck on key release. The patch clips the array value from 1..14 (instead of originally 0..17). Ticket with more information available at http://bugs.archlinux.org/task/15216 4. Other unknown variants (found one report with 218 bytes, but no further information about issues) For such unknown variants we should refrain from changing any device flags. Currently, HIDINPUT is suppressed and HIDDEV is enforced (because in 2.6.25 the quirk table did not yet allow differentiating variants and we did not expect variants either). Now we should be as strict as possible and enable it only for the first variant above. Signed-off-by: Robert Schedel <r.schedel@yahoo.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-22Merge branch 'for-linus' of ↵Linus Torvalds2-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: Move dereferences below a NULL test HID: hiddev, fix lock imbalance
2009-07-20HID: Move dereferences below a NULL testJulia Lawall1-2/+4
If the NULL test is necessary, then the dereferences should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E,E1; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E=E1 when != i if (E == NULL||...) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan1-1/+0
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-26HID: fix memory leak on error path in debug codeJiri Kosina1-1/+3
If hid_get_report() fails, we forgot to free the already allocated buffer for debugging messages on error path. Fix that up. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-22HID: hiddev, fix lock imbalanceJiri Slaby1-1/+3
Add omitted BKL to one switch/case. Cc: Stable <stable@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-15Driver Core: usb: add nodename support for usb drivers.Kay Sievers1-1/+6
This adds support for USB drivers to report their requested nodename to userspace. It also updates a number of USB drivers to provide the needed subdirectory and device name to be used for them. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jan Blunck <jblunck@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-12Merge branches 'upstream' and 'ntrig-multitouch' into for-linusJiri Kosina16-51/+805
2009-06-12HID: use debugfs for events/reports dumpingJiri Kosina2-29/+252
This is a followup patch to the one implemeting rdesc representation in debugfs rather than being dependent on compile-time CONFIG_HID_DEBUG setting. The API of the appropriate formatting functions is slightly modified -- if they are passed seq_file pointer, the one-shot output for 'rdesc' file mode is used, and therefore the message is formatted into the corresponding seq_file immediately. Otherwise the called function allocated a new buffer, formats the text into the buffer and returns the pointer to it, so that it can be queued into the ring-buffer of the processess blocked waiting on input on 'events' file in debugfs. 'debug' parameter to the 'hid' module is now used solely for the prupose of inetrnal driver state debugging (parser, transport, etc). Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-12HID: use debugfs for report dumping descriptorJiri Kosina6-109/+172
It is a little bit inconvenient for people who have some non-standard HID hardware (usually violating the HID specification) to have to recompile kernel with CONFIG_HID_DEBUG to be able to see kernel's perspective of the HID report descriptor and observe the parsed events. Plus the messages are then mixed up inconveniently with the rest of the dmesg stuff. This patch implements /sys/kernel/debug/hid/<device>/rdesc file, which represents the kernel's view of report descriptor (both the raw report descriptor data and parsed contents). With all the device-specific debug data being available through debugfs, there is no need for keeping CONFIG_HID_DEBUG, as the 'debug' parameter to the hid module will now only output only driver-specific debugging options, which has absolutely minimal memory footprint, just a few error messages and one global flag (hid_debug). We use the current set of output formatting functions. The ones that need to be used both for one-shot rdesc seq_file and also for continuous flow of data (individual reports, as being sent by the device) distinguish according to the passed seq_file parameter, and if it is NULL, it still output to kernel ringbuffer, otherwise the corresponding seq_file is used for output. The format of the output is preserved. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-06-10HID: fix inverted wheel for bluetooth version of apple mighty mouseJiri Kosina1-4/+0
Bluetooth version of Apple Mighty mouse (0x05ac/0x030c) doesn't, according to multiple reports on linux-input@, need the same quirk as the USB version of this mouse (0x05ac/0x0304) does. Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 20:50:06 +0000