summaryrefslogtreecommitdiff
path: root/drivers/hid
AgeCommit message (Collapse)AuthorFilesLines
2020-06-14treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada3-108/+108
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-10Merge branch 'for-linus' of ↵Linus Torvalds2-6/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for the Azoteq IQS269A capacitive touch controller - a new driver for the Cypress CY8CTMA140 touchscreen - updates to Elan and ft5x06 touchscreen drivers - assorted driver fixes - msm-vibrator has been removed as we have a more generic solution * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (28 commits) Input: adi - work around module name confict Input: iqs269a - add missing I2C dependency Input: elants - refactor elants_i2c_execute_command() Input: elants - override touchscreen info with DT properties Input: elants - remove unused axes Input: add support for Azoteq IQS269A dt-bindings: input: Add bindings for Azoteq IQS269A Input: imx_sc_key - use devm_add_action_or_reset() to handle all cleanups Input: remove msm-vibrator driver dt-bindings: Input: remove msm-vibrator Input: elants_i2c - provide an attribute to show calibration count Input: introduce input_mt_report_slot_inactive() dt-bindings: input: touchscreen: elants_i2c: convert to YAML Input: add driver for the Cypress CY8CTMA140 touchscreen dt-bindings: touchscreen: Add CY8CTMA140 bindings Input: edt-ft5x06 - prefer asynchronous probe Input: edt-ft5x06 - improve power management operations Input: edt-ft5x06 - move parameter restore into helper Input: edt-ft5x06 - fix get_default register write access Input: atkbd - receive and use physcode->keycode mapping from FW ...
2020-06-03Merge branches 'for-5.7/upstream-fixes', 'for-5.8/apple', 'for-5.8/asus', ↵Jiri Kosina9-74/+335
'for-5.8/core', 'for-5.8/intel-ish', 'for-5.8/logitech', 'for-5.8/mcp2221' and 'for-5.8/multitouch' into for-linus
2020-05-27HID: multitouch: Remove MT_CLS_WIN_8_DUALKai-Heng Feng2-50/+2
After commit c23e2043d5f7 ("HID: multitouch: do not filter mice nodes"), MT_CLS_WIN_8 also supports mouse nodes, hence make MT_CLS_WIN_8_DUAL redundant. Remove MT_CLS_WIN_8_DUAL accordingly. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-05-27HID: multitouch: enable multi-input as a quirk for some devicesBenjamin Tissoires1-0/+26
Two touchpad/trackstick combos are currently not behaving properly. They define a mouse emulation collection, as per Win8 requirements, but also define a separate mouse collection for the trackstick. The way the kernel currently treat the collections is that it merges both in one device. However, given that the first mouse collection already defines X,Y and left, right buttons, when mapping the events from the second mouse collection, hid-multitouch sees that these events are already mapped, and simply ignores them. To be able to report events from the tracktick, add a new quirked class for it, and manually add the 2 devices we know about. Link: https://bugzilla.kernel.org/show_bug.cgi?id=207235 Cc: stable@vger.kernel.org Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-05-26HID: sony: Fix for broken buttons on DS3 USB donglesScott Shumate1-0/+17
Fix for non-working buttons on knock-off USB dongles for Sony controllers. These USB dongles are used to connect older Sony DA/DS1/DS2 controllers via USB and are common on Amazon, AliExpress, etc. Without the patch, the square, X, and circle buttons do not function. These dongles used to work prior to kernel 4.10 but removing the global DS3 report fixup in commit e19a267b9987 ("HID: sony: DS3 comply to Linux gamepad spec") exposed the problem. Many people reported the problem on the Ubuntu forums and are working around the problem by falling back to the 4.9 hid-sony driver. The problem stems from these dongles incorrectly reporting their button count as 13 instead of 16. This patch fixes up the report descriptor by changing the button report count to 16 and removing 3 padding bits. Cc: stable@vger.kernel.org Fixes: e19a267b9987 ("HID: sony: DS3 comply to Linux gamepad spec") Signed-off-by: Scott Shumate <scott.shumate@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-15HID: Add quirks for Trust Panora Graphic TabletCristian Klein2-0/+4
The Trust Panora Graphic Tablet has two interfaces. Interface zero reports pen movement, pen pressure and pen buttons. Interface one reports tablet buttons and tablet scroll. Both use the mouse protocol. Without these quirks, libinput gets confused about what device it talks to. For completeness, here is the usbhid-dump: ``` $ sudo usbhid-dump -d 145f:0212 003:013:001:DESCRIPTOR 1588949402.559961 05 0D 09 01 A1 01 85 07 A1 02 09 00 75 08 95 07 81 02 C0 C0 09 0E A1 01 85 05 09 23 A1 02 09 52 09 53 25 0A 75 08 95 02 B1 02 C0 C0 05 0C 09 36 A1 00 85 06 05 09 19 01 29 20 15 00 25 01 95 20 75 01 81 02 C0 003:013:000:DESCRIPTOR 1588949402.563942 05 01 09 02 A1 01 85 08 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 09 38 09 00 15 81 25 7F 75 08 95 04 81 06 C0 C0 05 01 09 02 A1 01 85 09 09 01 A1 00 05 09 19 01 29 03 15 00 25 01 95 03 75 01 81 02 95 05 81 01 05 01 09 30 09 31 26 FF 7F 95 02 75 10 81 02 05 0D 09 30 26 FF 03 95 01 75 10 81 02 C0 C0 05 01 09 00 A1 01 85 04 A1 00 26 FF 00 09 00 75 08 95 07 B1 02 C0 C0 ``` Signed-off-by: Cristian Klein <cristian.klein@elastisys.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-15HID: apple: Swap the Fn and Left Control keys on Apple keyboardsfree5lot1-2/+28
This patch allows users to swap the Fn and left Control keys on all Apple keyboards: internal (e.g. Macbooks) and external (both wired and wireless). The patch adds a new hid-apple module param: swap_fn_leftctrl (off by default). Signed-off-by: Zakhar Semenov <mail@free5lot.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-12Input: introduce input_mt_report_slot_inactive()Jiada Wang2-6/+3
input_mt_report_slot_state() ignores "tool" argument when the slot is closed, which has caused a bit of confusion. Let's introduce input_mt_report_slot_inactive() to report inactive slot state. Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Link: https://lore.kernel.org/r/20200508055656.96389-2-jiada_wang@mentor.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-05-07HID: asus: Add depends on USB_HID to HID_ASUS Kconfig optionHans de Goede1-0/+1
Since commit 4bc43a421218 ("HID: asus: Add hid_is_using_ll_driver(usb_hid_driver) check") the hid-asus.c depends on the usb_hid_driver symbol. Add a depends on USB_HID to Kconfig to fix missing symbols errors in hid-asus when USB_HID is not enabled. Fixes: 4bc43a421218 ("HID: asus: Add hid_is_using_ll_driver(usb_hid_driver) check") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-06HID: asus: Fix mute and touchpad-toggle keys on Medion Akoya E1239THans de Goede1-0/+60
The mute key, is broken. All the consumer keys on the keyboard USB interface work normally, except for mute which only sends press events and never sends release events. The touchpad key sends the otherwise unused input report with a report-id of 5 on the touchpad interface. It too only sends press events. This also requires extra special handling since the multi-touch touchpad events and the KEY_F21 events for the touchpad toggle must not be send from the same input_dev (userspace cannot handle this). This commit adds special handlig for both, fixing these keys not working. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-06HID: asus: Add support for multi-touch touchpad on Medion Akoya E1239THans de Goede2-1/+26
The multi-touch touchpad found on the Medion Akoya E1239T's keyboard-dock, uses the same custom multi-touch protocol as the Asus keyboard-docks (same chipset vendor, Integrated Technology Express / ITE). Add support for this using the existing multi-touch touchpad support in the hid-asus driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-06HID: asus: Add report_size to struct asus_touchpad_infoHans de Goede1-1/+7
Add the report_size to struct asus_touchpad_info instead of calculating it. This is a preparation patch for adding support for the multi-touch touchpad found on the Medion Akoya E1239T's keyboard-dock, which uses the same custom multi-touch protocol as the Asus keyboard-docks (same chipset vendor, Integrated Technology Express / ITE). The only difference in that the Akoya E1239T keyboard-dock's input-reports have a 5 byte footer instead of a 1 byte footer, which requires the report_size to be configurable per touchpad-model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-06HID: asus: Add hid_is_using_ll_driver(usb_hid_driver) checkHans de Goede1-1/+2
Add a hid_is_using_ll_driver(usb_hid_driver) check to ensure that the parent device is an usb_interface, before casting the parent device pointer to an usb_interface pointer with to_usb_interface(). Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-06HID: asus: Simplify skipping of mappings for Asus T100CHI keyboard-dockHans de Goede1-14/+7
Before this commit the code was trying to keep the mapping for the left mouse-button, do avoid the hidinput_has_been_populated() check in hid-input.c from triggering and causing the touchpad input_dev ro get cleaned up. But the hidinput_has_been_populated() check happens after the input_configured callback which sets up all the input bit for the touchpad, so there is no need to preserve the left button mapping. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-06HID: asus: Only set EV_REP if we are adding a mappingHans de Goede1-2/+2
Make asus_input_mapping() only set EV_REP if we are adding a mapping. The T100CHI bluetooth keyboard dock has a few input reports for which we do not create any mappings (these input-reports are present in the descriptors but never send). The hid-asus code relies on the HID core not creating input devices for input-reports without any mappings. But the present of the EV_REP but counts as a mapping causing 6 /dev/input/event# nodes to be created for the T100CHI bluetooth keyboard dock. This change brings the amount of created /dev/input/event# nodes / input-devices down to 4. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-05HID: i2c-hid: add Schneider SCL142ALM to descriptor overrideJulian Sax1-0/+8
This device uses the SIPODEV SP1064 touchpad, which does not supply descriptors, so it has to be added to the override list. Cc: stable@vger.kernel.org Signed-off-by: Julian Sax <jsbc@gmx.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-05HID: intel-ish-hid: avoid bogus uninitialized-variable warningArnd Bergmann1-0/+2
Older compilers like gcc-4.8 don't see that the variable is initialized when it is used: In file included from include/linux/compiler_types.h:68:0, from <command-line>:0: drivers/hid/intel-ish-hid/ishtp-fw-loader.c: In function 'load_fw_from_host': include/linux/compiler-gcc.h:75:45: warning: 'fw_info.ldr_capability.max_dma_buf_size' may be used uninitialized in this function [-Wmaybe-uninitialized] #define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__) ^ drivers/hid/intel-ish-hid/ishtp-fw-loader.c:770:22: note: 'fw_info.ldr_capability.max_dma_buf_size' was declared here struct shim_fw_info fw_info; ^ Make sure to initialize it before returning an error from ish_query_loader_prop(). Fixes: 91b228107da3 ("HID: intel-ish-hid: ISH firmware loader client driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-05-04HID: quirks: Add HID_QUIRK_NO_INIT_REPORTS quirk for Dell K12A keyboard-dockHans de Goede2-0/+2
Add a HID_QUIRK_NO_INIT_REPORTS quirk for the Dell K12A keyboard-dock, which can be used with various Dell Venue 11 models. Without this quirk the keyboard/touchpad combo works fine when connected at boot, but when hotplugged 9 out of 10 times it will not work properly. Adding the quirk fixes this. Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29HID: mcp2221: add gpiolib dependencyArnd Bergmann1-0/+1
Without gpiolib, this driver fails to link: arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp2221_probe': hid-mcp2221.c:(.text+0x1b0): undefined reference to `devm_gpiochip_add_data' arm-linux-gnueabi-ld: drivers/hid/hid-mcp2221.o: in function `mcp_gpio_get': hid-mcp2221.c:(.text+0x30c): undefined reference to `gpiochip_get_data' Fixes: 328de1c519c5 ("HID: mcp2221: add GPIO functionality support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Rishi Gupta <gupt21@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29HID: i2c-hid: reset Synaptics SYNA2393 on resumeDaniel Playfair Cal2-0/+5
On the Dell XPS 9570, the Synaptics SYNA2393 touchpad generates spurious interrupts after resuming from suspend until it receives some input or is reset. Add it to the quirk I2C_HID_QUIRK_RESET_ON_RESUME so that it is reset when resuming from suspend. More information about the bug can be found in this mailing list discussion: https://www.spinics.net/lists/linux-input/msg59530.html Signed-off-by: Daniel Playfair Cal <daniel.playfair.cal@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29HID: wacom: Report 2nd-gen Intuos Pro S center button status over BTJason Gerecke1-3/+6
The state of the center button was not reported to userspace for the 2nd-gen Intuos Pro S when used over Bluetooth due to the pad handling code not being updated to support its reduced number of buttons. This patch uses the actual number of buttons present on the tablet to assemble a button state bitmap. Link: https://github.com/linuxwacom/xf86-input-wacom/issues/112 Fixes: cd47de45b855 ("HID: wacom: Add 2nd gen Intuos Pro Small support") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Cc: stable@vger.kernel.org # v5.3+ Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-29HID: usbhid: Fix race between usbhid_close() and usbhid_stop()Alan Stern2-8/+30
The syzbot fuzzer discovered a bad race between in the usbhid driver between usbhid_stop() and usbhid_close(). In particular, usbhid_stop() does: usb_free_urb(usbhid->urbin); ... usbhid->urbin = NULL; /* don't mess up next start */ and usbhid_close() does: usb_kill_urb(usbhid->urbin); with no mutual exclusion. If the two routines happen to run concurrently so that usb_kill_urb() is called in between the usb_free_urb() and the NULL assignment, it will access the deallocated urb structure -- a use-after-free bug. This patch adds a mutex to the usbhid private structure and uses it to enforce mutual exclusion of the usbhid_start(), usbhid_stop(), usbhid_open() and usbhid_close() callbacks. Reported-and-tested-by: syzbot+7bf5a7b0f0a1f9446f4c@syzkaller.appspotmail.com Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-16HID: mcp2221: add GPIO functionality supportRishi Gupta1-0/+169
MCP2221 has 4 pins that can be used as GPIO or configured for alternate functionality such as clock generation and IRQ detection. This patch adds support for GPIO functionality. To set direction of a pin or to toggle its state after it has been configured as GPIO, driver sends command to mcp2221 and parses response received from mcp2221. Based on this response either 0 or appropriate error code is returned to GPIO framework. To get the direction or current state of a pin, driver sends command and read response from the device. Based on the response received from device direction or value is sent to the GPIO framework. Command from driver to mcp2221 device are output report. Response received from mcp2221 is input report. Datasheet (page 45-48) contains details about how to decode the response received from device: http://ww1.microchip.com/downloads/en/DeviceDoc/20005565B.pdf Signed-off-by: Rishi Gupta <gupt21@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-16Revert "HID: wacom: generic: read the number of expected touches on a per ↵Jason Gerecke1-63/+16
collection basis" This reverts commit 15893fa40109f5e7c67eeb8da62267d0fdf0be9d. The referenced commit broke pen and touch input for a variety of devices such as the Cintiq Pro 32. Affected devices may appear to work normally for a short amount of time, but eventually loose track of actual touch state and can leave touch arbitration enabled which prevents the pen from working. The commit is not itself required for any currently-available Bluetooth device, and so we revert it to correct the behavior of broken devices. This breakage occurs due to a mismatch between the order of collections and the order of usages on some devices. This commit tries to read the contact count before processing events, but will fail if the contact count does not occur prior to the first logical finger collection. This is the case for devices like the Cintiq Pro 32 which place the contact count at the very end of the report. Without the contact count set, touches will only be partially processed. The `wacom_wac_finger_slot` function will not open any slots since the number of contacts seen is greater than the expectation of 0, but we will still end up calling `input_mt_sync_frame` for each finger anyway. This can cause problems for userspace separate from the issue currently taking place in the kernel. Only once all of the individual finger collections have been processed do we finally get to the enclosing collection which contains the contact count. The value ends up being used for the *next* report, however. This delayed use of the contact count can cause the driver to loose track of the actual touch state and believe that there are contacts down when there aren't. This leaves touch arbitration enabled and prevents the pen from working. It can also cause userspace to incorrectly treat single- finger input as gestures. Link: https://github.com/linuxwacom/input-wacom/issues/146 Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Fixes: 15893fa40109 ("HID: wacom: generic: read the number of expected touches on a per collection basis") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-15HID: alps: ALPS_1657 is too specific; use U1_UNICORN_LEGACY insteadJiri Kosina2-2/+2
HID_DEVICE_ID_ALPS_1657 PID is too specific, as there are many other ALPS hardware IDs using this particular touchpad. Rename the identifier to HID_DEVICE_ID_ALPS_U1_UNICORN_LEGACY in order to describe reality better. Fixes: 640e403b1fd24 ("HID: alps: Add AUI1657 device ID") Reported-by: Xiaojian Cao <xiaojian.cao@cn.alps.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-14HID: alps: Add AUI1657 device IDArtem Borisov2-1/+2
This device is used on Lenovo V130-15IKB variants and uses the same registers as U1. Signed-off-by: Artem Borisov <dedsa2002@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-14HID: fix typo in KconfigChristophe JAILLET1-2/+2
Fix 2 typos: s/Uninterruptable/Uninterruptible/ s/should't/shouldn't/ Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-14HID: logitech: Add support for Logitech G11 extra keysFabian Schindlatz2-0/+5
The Logitech G11 keyboard is a cheap variant of the G15 without the LCD screen. It uses the same layout for its extra and macro keys (G1 - G18, M1-M3, MR) and - from the input subsystem's perspective - behaves just like the G15, so we can treat it as such. Tested it with my own keyboard. Signed-off-by: Fabian Schindlatz <fabian.schindlatz@fau.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-14HID: multitouch: add eGalaxTouch P80H84 supportSebastian Reichel2-0/+4
Add support for P80H84 touchscreen from eGalaxy: idVendor 0x0eef D-WAV Scientific Co., Ltd idProduct 0xc002 iManufacturer 1 eGalax Inc. iProduct 2 eGalaxTouch P80H84 2019 vDIVA_1204_T01 k4.02.146 Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-06HID: logitech: drop outdated references to unifying receiversFilipe Laíns3-6/+6
The hid-logitech-{dj,hidpp} were originally developed for unifying receivers but since then they have evolved and now support other types of receivers and devices. This patch adjusts the original descriptions with this in mind. Signed-off-by: Filipe Laíns <lains@archlinux.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-04-03HID: wacom: Read HID_DG_CONTACTMAX directly for non-generic devicesJason Gerecke1-1/+3
We've recently switched from extracting the value of HID_DG_CONTACTMAX at a fixed offset (which may not be correct for all tablets) to injecting the report into the driver for the generic codepath to handle. Unfortunately, this change was made for *all* tablets, even those which aren't generic. Because `wacom_wac_report` ignores reports from non- generic devices, the contact count never gets initialized. Ultimately this results in the touch device itself failing to probe, and thus the loss of touch input. This commit adds back the fixed-offset extraction for non-generic devices. Link: https://github.com/linuxwacom/input-wacom/issues/155 Fixes: 184eccd40389 ("HID: wacom: generic: read HID_DG_CONTACTMAX from any feature report") Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> CC: stable@vger.kernel.org # 5.3+ Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
2020-04-01Merge branch 'for-linus' of ↵Linus Torvalds12-18/+871
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - Logitech HID++ protocol support improvement from Filipe Laíns - probe fix for Logitech-G* devices from Hans de Goede - a few other small code cleanups and support for new device IDs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: rmi: Simplify an error handling path in 'rmi_hid_read_block()' HID: intel-ish-hid: hbm.h: Replace zero-length array with flexible-array member HID: intel-ish-hid: ishtp-dev.h: Replace zero-length array with flexible-array member HID: Add driver fixing Glorious PC Gaming Race mouse report descriptor HID: lg-g15: Do not fail the probe when we fail to disable F# emulation HID: appleir: Use devm_kzalloc() instead of kzalloc() HID: appleir: Remove unnecessary goto label HID: logitech-dj: add support for the static device in the Powerplay mat/receiver HID: mcp2221: add usb to i2c-smbus host bridge HID: logitech-dj: add debug msg when exporting a HID++ report descriptors HID: quirks: Remove ITE 8595 entry from hid_have_special_driver
2020-04-01Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "My attempt to revitalize trivial queue I've been neglecting for years (what a disaster that was for this world, right? :) ) with patches collected from backlog that were still relevant and not applied elsewhere in the meantime" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: err.h: remove deprecated PTR_RET for good blk-mq: Fix typo in comment x86/boot: Fix comment spelling sh: mach-highlander: Fix comment spelling s390/dasd: Fix comment spelling mfd: wm8994: Fix comment spelling docs: Add reference in binfmt-misc.rst genirq: fix kerneldoc comment for irq_desc drm/amdgpu: fix two documentation mismatch issues HID: fix Kconfig word ordering list/hashtable: minor documentation corrections.
2020-04-01Merge branch 'for-5.7/mcp2221' into for-linusJiri Kosina4-0/+754
2020-04-01Merge branch 'for-5.7/logitech' into for-linusJiri Kosina1-2/+9
- Logitech HID++ protocol support improvement from Filipe Laíns
2020-04-01Merge branch 'for-5.7/ish' into for-linusJiri Kosina2-2/+2
- C99 code purification in intel-ish-hid from Gustavo A. R. Silva
2020-04-01Merge branch 'for-5.7/glorious' into for-linusJiri Kosina5-4/+100
- report descriptor fix for Glorious PC Gaming Race device from Samuel Čavoj
2020-04-01Merge branch 'for-5.7/core' into for-linusJiri Kosina1-3/+0
- device-specific (ITE 8595) fix from Hans de Goede
2020-04-01Merge branch 'for-5.7/appleir' into for-linusJiri Kosina2-10/+5
- small code cleanups in hid-appleir from Lucas Tanure
2020-03-23HID: rmi: Simplify an error handling path in 'rmi_hid_read_block()'Christophe JAILLET1-1/+0
The 'RMI_READ_REQUEST_PENDING' bit is already cleared in the error handling path. There is no need to reset it twice. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-21HID: intel-ish-hid: hbm.h: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-21HID: intel-ish-hid: ishtp-dev.h: Replace zero-length array with ↵Gustavo A. R. Silva1-1/+1
flexible-array member The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-18HID: Add driver fixing Glorious PC Gaming Race mouse report descriptorSamuel Čavoj4-0/+98
The Glorious Model O mice (and also at least the Model O-, which is driver-wise the same mouse) have a bug in the descriptor of HID Report with ID 2. This report is used for Consumer Control buttons, which can be mapped using the provided Windows only software. Here is an excerpt from the original descriptor: INPUT(2)[INPUT] Field(0) Flags( Constant Variable Absolute ) Field(1) Flags( Constant Variable Absolute ) Field(2) Flags( Constant Variable Absolute ) The issue is the Constant flag specified on all 3 fields, which causes the hid driver to ignore changes in these fields and essentialy causes the buttons to not work at all. The submitted driver patches the descriptor to end up with the following: INPUT(2)[INPUT] Field(0) Flags( Variable Relative ) Field(1) Flags( Variable Relative ) Field(2) Flags( Variable Relative ) The Constant bit is reset and the Relative bit has been set in order to prevent repeat events when holding down the button. Additionally, the device name is changed from the hardware-reported "SINOWEALTH Wired Gaming Mouse" to "Glorious Model O" or "Glorious Model D". Signed-off-by: Samuel Čavoj <sammko@sammserver.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-17HID: lg-g15: Do not fail the probe when we fail to disable F# emulationHans de Goede1-2/+4
By default the G1-G12 keys on the Logitech gaming keyboards send F1 - F12 when in "generic HID" mode. The first thing the hid-lg-g15 driver does is disable this behavior. We have received a bugreport that this does not work when the keyboard is connected through an Aten KVM switch. Using a gaming keyboard with a KVM is a bit weird setup, but still we can try to fail a bit more gracefully here. On the G510 keyboards the same USB-interface which is used for the gaming keys is also used for the media-keys. Before this commit we would call hid_hw_stop() on failure to disable the F# emulation and then exit the probe method with an error code. This not only causes us to not handle the gaming-keys, but this also breaks the media keys which is a regression compared to the situation when these keyboards where handled by the generic hidinput driver. This commit changes the error handling to clear the hiddev drvdata (to disable our .raw_event handler) and then returning from the probe method with success. The net result of this is that, when connected through a KVM, things work as well as they did before the hid-lg-g15 driver was introduced. Fixes: ad4203f5a243 ("HID: lg-g15: Add support for the G510 keyboards' gaming keys") BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1806321 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-17HID: fix Kconfig word orderingGeert Uytterhoeven1-1/+1
Fix a silly word ordering typo. Fixes: 42337b9d4d958daa ("HID: add driver for U2F Zero built-in LED and RNG") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-17Merge branch 'for-linus' of ↵Linus Torvalds5-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - string buffer formatting fixes in picolcd and sensor drivers, from Takashi Iwai - two new device IDs from Chen-Tsung Hsieh and Tony Fischetti * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: add ALWAYS_POLL quirk to lenovo pixart mouse HID: google: add moonball USB id HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow
2020-03-16HID: add ALWAYS_POLL quirk to lenovo pixart mouseTony Fischetti2-0/+2
A lenovo pixart mouse (17ef:608d) is afflicted common the the malfunction where it disconnects and reconnects every minute--each time incrementing the device number. This patch adds the device id of the device and specifies that it needs the HID_QUIRK_ALWAYS_POLL quirk in order to work properly. Signed-off-by: Tony Fischetti <tony.fischetti@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-16HID: google: add moonball USB idChen-Tsung Hsieh2-0/+3
Add 1 additional hammer-like device. Signed-off-by: Chen-Tsung Hsieh <chentsung@chromium.org> Reviewed-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-03-13HID: appleir: Use devm_kzalloc() instead of kzalloc()Lucas Tanure1-3/+2
Signed-off-by: Lucas Tanure <tanure@linux.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 18:50:03 +0000