summaryrefslogtreecommitdiff
path: root/drivers/hid/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2014-08-08Merge branch 'for-linus' of ↵Linus Torvalds1-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - big update to Wacom driver by Benjamin Tissoires, converting it to HID infrastructure and unifying USB and Bluetooth models - large update to ALPS driver by Hans de Goede, which adds support for newer touchpad models as well as cleans up and restructures the code - more changes to Atmel MXT driver, including device tree support - new driver for iPaq x3xxx touchscreen - driver for serial Wacom tablets - driver for Microchip's CAP1106 - assorted cleanups and improvements to existing drover and input core * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (93 commits) Input: wacom - update the ABI doc according to latest changes Input: wacom - only register once the MODULE_* macros Input: HID - remove hid-wacom Bluetooth driver Input: wacom - add copyright note and bump version to 2.0 Input: wacom - remove passing id for wacom_set_report Input: wacom - check for bluetooth protocol while setting OLEDs Input: wacom - handle Intuos 4 BT in wacom.ko Input: wacom - handle Graphire BT tablets in wacom.ko Input: wacom - prepare the driver to include BT devices Input: hyperv-keyboard - register as a wakeup source Input: imx_keypad - remove ifdef round PM methods Input: jornada720_ts - get rid of space indentation and use tab Input: jornada720_ts - switch to using managed resources Input: alps - Rushmore and v7 resolution support Input: mcs5000_ts - remove ifdef around power management methods Input: mcs5000_ts - protect PM functions with CONFIG_PM_SLEEP Input: ads7846 - release resources on failure for clean exit Input: wacom - add support for 0x12C ISDv4 sensor Input: atmel_mxt_ts - use deep sleep mode when stopped ARM: dts: am437x-gp-evm: Update binding for touchscreen size ...
2014-08-07Merge branch 'for-next' of ↵Linus Torvalds1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds Pull LED updates from Bryan Wu: "This cycle we got: - a fix of attribute-creation race for the whole leds subsystem - new drivers (HID:GT683R, leds-ipaq-micro) - other fixing and clean up" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/cooloney/linux-leds: (23 commits) leds: ipaq-micro: fix sparse non static symbol warning leds: add driver for the iPAQ micro Documentation: dts: tcs6507: Fix wrong statement about #gpio-cells leds: convert blink timer to workqueue leds:pca963x: Update for PCA9635 and correct statement about MODE2 OUTDRV default leds:pca963x: Always initialize MODE2 register leds:pca963x: Add support for PCA9635 LED driver chip HID: gt683r: move mode attribute to led-class devices HID: gt683r: fix race condition HID: add support for MSI GT683R led panels leds: lp55xx-common: fix attribute-creation race leds: lp55xx-common: fix sysfs entry leak input: lm8323: fix attribute-creation race leds: wm831x-status: fix attribute-creation race leds: ss4200: fix attribute-creation race leds: ns2: fix attribute-creation race leds: netxbig: fix attribute-creation race leds: max8997: fix attribute-creation race leds: lm3642: fix attribute-creation race leds: lm355x: fix attribute-creation race ...
2014-08-06Input: HID - remove hid-wacom Bluetooth driverBenjamin Tissoires1-9/+1
Bluetooth Wacom tablets are now handled by the regular wacom.ko driver. Remove the now useless hid-wacom driver. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Reviewed-by: Ping Cheng <pingc@wacom.com> Tested-by: Przemo Firszt <przemo@firszt.eu> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-08-06Merge branches 'for-3.17/upstream', 'for-3.17/cp2112', 'for-3.17/huion', ↵Jiri Kosina1-8/+10
'for-3.17/hyperv', 'for-3.17/i2c', 'for-3.17/lenovo', 'for-3.17/rmi' and 'for-3.17/sony' into for-linus
2014-07-29HID: lenovo: Add support for Compact (BT|USB) keyboardJamie Lentin1-0/+2
Add support for both ThinkPad Compact Bluetooth Keyboard with TrackPoint and ThinkPad Compact USB Keyboard with TrackPoint. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-29HID: lenovo: Rename hid-lenovo-tpkbd to hid-lenovoJamie Lentin1-7/+7
Rename module and all functions within so we can add support for other keyboards in the same file. Rename the _tp postfix to _tpkbd, to signify functions relevant to the TP USB keyboard. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-07-25Input: wacom - move the USB (now hid) Wacom driver in drivers/hidBenjamin Tissoires1-0/+13
wacom.ko is now a full HID driver, we have to move it into the proper subdirectory: drivers/hid. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2014-07-01HID: add support for MSI GT683R led panelsJanne Kanniainen1-0/+14
This driver adds support for USB controlled led panels that exists in MSI GT683R laptop Signed-off-by: Janne Kanniainen <janne.kanniainen@gmail.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-06-11HID: sensor-hub: introduce Kconfig dependency on IOMEMChen Gang1-1/+1
When NO_IOMEM is enabled (e.g. score architecture), some drivers which need HAS_IOMEM need notice about it, or it will report related warning: warning: (GPIO_SCH && GPIO_ICH && GPIO_VX855 && GPIO_RDC321X && IE6XX_WDT && RADIO_WL1273 && HID_SENSOR_HUB && MFD_NVEC) selects MFD_CORE which has unmet direct dependencies (HAS_IOMEM) Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-11HID: Kconfig: drop remove Unicode non-breaking space from KconfigBrian Norris1-1/+1
There is a UTF-8 non-breaking space character (0xc2 0xa0) after the "Y" in "Say Y here". This is probably not intentional. Replace it with a standard ASCII space (0x20). If you can't see a difference here, I don't blame you :) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-06-04Merge branches 'for-3.16/i2c-hid', 'for-3.16/rmi4', 'for-3.16/sony' and ↵Jiri Kosina1-0/+8
'for-3.16/thingm' into for-linus
2014-05-20HID: quirk for Saitek RAT7 and MMO7 mices' mode buttonHarald Brinkmann1-1/+4
Some saitek mice implement a tristate button (for switching button mappings in the original driver) by keeping one of three (non-physical) buttons constantly pressed. This breaks X and probably other userspace software. This patch implements a quirk for the R.A.T.7 and M.M.O.7, tracking the mode and generating presses of a single button if it changes. Also the missing release event is generated instantly. Signed-off-by: Harald Brinkmann <hbrinkmann@braincalibration.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-04-09HID: rmi: introduce RMI driver for Synaptics touchpadsBenjamin Tissoires1-0/+8
This driver add support for RMI4 over USB or I2C. The current state is that it uses its own RMI4 implementation, but once RMI4 is merged upstream, the driver will be a transport driver for the RMI4 library. Part of this driver should be considered as temporary. Most of the RMI4 processing and input handling will be deleted at some point. I based my work on Andrew's regarding its port of RMI4 over HID (see https://github.com/mightybigcar/synaptics-rmi4/tree/rmihid ) This repo presents how the driver may looks like at the end: https://github.com/mightybigcar/synaptics-rmi4/blob/rmihid/drivers/input/rmi4/rmi_hid.c Without this temporary solution, the workaround we gave to users is to disable i2c-hid, which leads to disabling the touchscreen on the XPS 11 and 12 (Haswell generation). Related bugs: https://bugzilla.redhat.com/show_bug.cgi?id=1048314 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1218973 Signed-off-by: Andrew Duggan <aduggan@synaptics.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-03-14Merge branch 'for-3.15/sony' into for-3.15/hid-core-ll-transport-cleanupJiri Kosina1-4/+6
2014-02-18HID: cp2112: can't be used without gpio supportJiri Kosina1-1/+1
Add Kconfig driver dependency on GPIOLIB. Reported-by: fengguang.wu@intel.com Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-17HID: add hid-cp2112 driverDavid Barksdale1-0/+9
This patch adds support for the Silicon Labs CP2112 "Single-Chip HID USB to SMBus Master Bridge." This is a HID device driver which registers as an i2c adapter and gpiochip to expose these functions of the CP2112. The customizable USB descriptor fields are exposed as sysfs attributes. The SMBus byte-read, byte-data-read/write, and word-data-read transfer modes have been tested by talking to an i2c sensor. The GPIO functions and USB descriptor field programming have also been tested. Signed-off-by: David Barksdale <dbarksdale@uplogix.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-04HID: Kconfig updates for the Sony moduleFrank Praznik1-4/+5
Update the HID_SONY config with 'select POWER_SUPPLY' to fix build issues relating to undefined references to the power_supply_* functions in certain build configurations. Update the description text to reflect that Playstation 4 controllers are now supported. [jkosina@suse.cz: drop the POWER_SUPPLY hunk, as I've already fixed that] Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-02-03HID: sony: fix build wrt. power_supplyJiri Kosina1-0/+1
Sony driver now makes use of power supply support. Make kernel config aware of it. Reported-by: fengguang.wu@intel.com Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-22Merge branches 'for-3.13/upstream-fixes', 'for-3.14/i2c-hid', ↵Jiri Kosina1-0/+1
'for-3.14/sensor-hub', 'for-3.14/sony' and 'for-3.14/upstream' into for-linus
2013-12-03HID: logitech-dj: add HIDRAW dependency in KconfigOlivier Gay1-0/+1
hid-logitech-dj.c driver needs hidraw to work correctly. Without hidraw, hid-logitech-dj.c fails during probe() and Logitech Unifying devices HID reports aren't recognized. The unifying receiver has 3 usb interfaces. When hid-logitech-dj driver is loaded, interfaces 0 and 1 are discarded. Interface 2 consists of a hid class interface with 3 collections, each of which sports the 'vendor' usage, thus, there is no reason for hid_input to claim any of them. On the other hand, hidraw has no issue in claiming the collections, even if they are 'vendor'. As of today, hid-logitech-dj uses hidraw api to send configuration/control reports to interface 2 of the Unifying receiver. Without the hid-logitech-dj driver, interfaces 0 and 1 are claimed by hid-input, as they correspond to a keyboard and a mouse. But that is not relevant to the discussion. [jkosina@suse.cz: make the changelog more verbose, thanks to Nestor] Signed-off-by: Olivier Gay <ogay@logitech.com> Signed-off-by: Nestor Lopez Casado <nlopezcasad@logitech.com> Signed-off-by: Mathieu Meisser <mmeisser@logitech.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-21HID: multicouh: add PID VID to support 1 new Wistron optical touch deviceKaiChung Cheng1-0/+1
This patch adds PID VID to support for the Wistron Inc. Optical touch panel. Signed-off-by: KaiChung Cheng <kenny_cheng@wistron.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-11-16Merge branches 'for-3.12/upstream-fixes', 'for-3.13/holtek', ↵Jiri Kosina1-5/+16
'for-3.13/i2c-hid', 'for-3.13/logitech', 'for-3.13/multitouch', 'for-3.13/roccat', 'for-3.13/upstream' and 'for-3.13/wiimote' into for-linus
2013-11-11HID: sony: Add force feedback support for Dualshock3 USBSven Eckelmann1-0/+8
Sony Dualshock 3 controllers have two motors which can be used to provide simple force feedback rumble effects. The right motor is can be used to create a weak rumble effect but does not allow to set the force. The left motor is used to create a strong rumble effect with adjustable intensity. The state of both motors can be changed using HID_OUTPUT_REPORT packets and have no timing information. FF memless is used to keep track of the timing and the sony driver just generates the necessary URBs. Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-30HID: multitouch: add manufacturer to Kconfig help textJan Matějka1-0/+1
tested with vendor=0x04f3 product=0x002f Signed-off-by: Jan Matějka <yac@blesmrt.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-25HID: add support for LEETGION Hellion Gaming MouseAnders F. U. Kiær1-0/+1
Added id, bindings and comments for Holtek USB ID 04d9:a072 LEETGION Hellion Gaming mouse to use the same corrections of the report descriptor as Holtek 04d9:a067. As the mouse exceed HID_MAX_USAGES at the same offsets in the reported descriptor. Tested on the hardware. Signed-off-by: Anders F. U. Kiær <ablacksheep@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-25HID: hid-multitouch: add support for SiS panelsForest Bond1-0/+1
Add support for SiS multitouch panels. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-14HID: Correct Kconfig MOMO descriptionSimon Wood1-1/+0
Minor correction to the description in Kconfig. The Logitect MOMO wheel is actually handled by the LOGITECH_WHEELS (hid-lg4ff) section, not by the LOGITECH_FF (hid-lgff). Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-09HID: logitech - lg2ff: Add IDs for Formula Vibration Feedback WheelElias Vanderstuyft1-3/+5
Add USB IDs for Logitech Formula Vibration Feedback Wheel (046d:ca04). The lg2ff force feedback subdriver is used for vibration and HID_GD_MULTIAXIS is set to avoid deadzone like other Logitech wheels. Kconfig description etc are also updated accordingly. Signed-off-by: Elias Vanderstuyft <Elias.vds@gmail.com> [anssi.hannula@iki.fi: added description and CCs] Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-02HID: add Holtek USB ID 04d9:a081 SHARKOON DarkGliderAnders F. U. Kiær1-0/+1
Added id, bindings and comments for Holtek USB ID 04d9:a081 SHARKOON DarkGlider Gaming mouse to use the same corrections of the report descriptor as Holtek 04d9:a04a. As the mouse exceed HID_MAX_USAGES at the same offsets in the reported descriptor. Tested on the hardware. Signed-off-by: Anders F. U. Kiær <ablacksheep@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-24HID: lenovo-tpkbd: remove usb dependencyBenjamin Tissoires1-1/+1
lenovo tpkbd currently relies on the usb interface number to detect if it is dealing with the touchpad interface or not. As the report descriptors of the interface 0 does not contain the button 3, we can use this to remove the need to check for usb. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky1-1/+1
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-07-29HID: Add new driver for non-compliant Xin-Mo devices.Olivier Scherler1-0/+8
The driver currently only supports the Dual Arcade controller. It fixes the negative axis event values (the devices sends -2) to match the logical axis minimum of the HID report descriptor (the report announces -1). It is needed because hid-input discards out of bounds values. Signed-off-by: Olivier Scherler <oscherler@ithink.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-07-04Merge branches 'for-3.11/wacom-fixed' and 'for-3.11/wiimote' into for-linusJiri Kosina1-10/+17
2013-07-04Merge branches 'for-3.11/multitouch', 'for-3.11/sony' and ↵Jiri Kosina1-12/+14
'for-3.11/upstream' into for-linus Conflicts: drivers/hid/hid-core.c
2013-07-04Merge branches 'for-3.11/battery', 'for-3.11/elo', 'for-3.11/holtek' and ↵Jiri Kosina1-0/+10
'for-3.11/i2c-hid-fixed' into for-linus
2013-06-13HID: fold ps3remote driver into generic Sony driverJiri Kosina1-12/+3
Let's follow the structure we are trying to keep for most of the specific HID drivers, and let the separation follow the producing vendor. Merge functionality provided by ps3remote driver into hid-sony. Tested-by: David Dillow <dave@thedillows.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-06-03HID: wiimote: remove old static extension supportDavid Herrmann1-9/+0
We now have dynamic hotplug support so the old static extensions are no longer needed nor used. Remove it along CONFIG_HID_WIIMOTE_EXT. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-06-03HID: wiimote: extend driver descriptionDavid Herrmann1-2/+18
The hid-wiimote driver supports more than the Wii Remote. Nintendo produced many devices based on the Wii Remote, which have extension devices built-in. It is not clear to many users, that these devices have anything in common with the Wii Remote, so fix the driver description. This also updates the copyright information for the coming hotplugging rework. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-29HID: add driver for ELO 4000/4500Jiri Slaby1-0/+7
This is a driver for ELO 4000/4500 devices which report themselves as HID devices, but do not really send HID events on touch. So we introduce a new HID 'quirk' driver with a raw_event handler where we take care of those events. What we need additionally is an input_configured hook, because the device does not mention anything about PRESSURE and TOUCH in its report descriptor, but it actually generate those. So we set the bits in the corresponding input_dev in that hook. Thanks to Petr Ostadal who was willing to test the driver. The rest of Cc's listed below had something to do with that driver over the years in our enterprise tree. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Tested-by: Petr Ostadal <postadal@suse.cz> Cc: Oliver Neukum <oliver@neukum.org> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Egbert Eich <eich@suse.com> Cc: Libor Pechacek <lpechacek@suse.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-28HID: add support for Huion 580 tabletMartin Rusko1-0/+6
Add hid-huion.c with support for Huion 580 tablet, which is simple 8x5" tablet with 4000LPI resolution and 2048 levels pressure-sensitive pen manufactured by the Chinese company Huion. The driver fixes incorrect report descriptor sent by the device, performs custom initialization required to switch the tablet into its native resolution mode and inverts the in-range bit. Signed-off-by: Martin Rusko <martin.rusko@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-28HID: Add support for Holtek gaming mouse 04d9:a04aChristian Ohm1-0/+2
This mouse is sold as Tracer Sniper TRM-503, NOVA Gaming Slider X200 and Zalman ZM-GM1, and reports too high usage maximum and logical maximum (like 04d9:a067, but its report descriptor is different). This patch adds its USB ID and fixes the report descriptor in the same way. Note: I don't actually have such a mouse to test, I took the report descriptor posted at https://bugzilla.novell.com/show_bug.cgi?id=774676, compared it to the one from 04d9:a067 and changed the offsets accordingly (all numbers minus 9, since it is 9 bytes shorter, and the difference is before the values that need changing). That Surely Works™. Signed-off-by: Christian Ohm <chr.ohm@gmx.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-28HID: Add driver for Holtek gaming mouse 04d9:a067Christian Ohm1-0/+1
This mouse is sold as Sharkoon Drakonia and Perixx MX-2000 and reports a too high usage maximum and logical maximum. This driver fixes the report descriptor so those values don't exceed HID_MAX_USAGES. Signed-off-by: Christian Ohm <chr.ohm@gmx.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-28HID: sony: fix leds dependencyJiri Kosina1-2/+2
The newly added support for Buzz controller - introduced Kconfig selection of LEDS_CLASS - introduced conditional preprocessor checking for CONFIG_LEDS_CLASS This has multiple problems -- namely select doesn't work transitively, so it shouldn't be used. On the other hand the code assumed that LEDS_CLASS is enabled in some places, but not everywhere. Put LEDS_CLASS as a Kconfig dependency for hid-sony and remove all the CONFIG_LEDS_CLASS conditionals from hid-sony. Reported-by: fengguang.wu@intel.com Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-05-28HID: driver for PS2/3 Buzz controllersColin Leitner1-2/+7
This patch adds support for PS2/3 Buzz controllers into hid-sony It has been tested on Debian 7 with kernel version 3.10.0-rc2. Unfortunately I can't test the patch with a regular six-axis controller myself. Signed-off-by: Colin Leitner <colin.leitner@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: linux-input@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-30Merge branches 'for-3.10/multitouch', 'for-3.10/roccat' and ↵Jiri Kosina1-4/+4
'for-3.10/upstream' into for-linus Conflicts: drivers/hid/Kconfig
2013-04-30Merge branches 'for-3.10/appleir', 'for-3.10/hid-debug', ↵Jiri Kosina1-49/+49
'for-3.10/hid-driver-transport-cleanups', 'for-3.10/i2c-hid' and 'for-3.10/logitech' into for-linus
2013-04-21HID: clarify Magic Mouse Kconfig descriptionDavid King1-3/+3
The Magic Mouse driver also supports the Magic Trackpad, so mention it in the KConfig description for the driver. Signed-off-by: David King <amigadave@amigadave.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-04-18HID: appleir: add support for Apple ir devicesBenjamin Tissoires1-0/+11
This driver was originally written by James McKenzie, updated by Greg Kroah-Hartman, further updated by Bastien Nocera, with suspend support added. I ported it to the HID subsystem, in order to simplify it a litle and allow lirc to use it through hiddev. More recent versions of the IR receiver are also supported through a patch by Alex Karpenko. The patch also adds support for the 2nd and 5th generation of the controller, and the menu key on newer brushed metal remotes. Tested-by: Fabien André <fabien.andre@gmail.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-07HID: holtek: Holtek devices depends on USB_HIDBenjamin Tissoires1-1/+1
In the HID drivers tranport cleanup series, I removed the dependency between hid-holtek and usbhid. This was wrong as hid-holtek.c relies extensively on usb calls. This fixes compilation error when CONFIG_USB_SUPPORT is not enabled. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-05HID: Kconfig: fix "-- help---"Paul Bolle1-1/+1
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-15 07:30:40 +0000