summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2020-08-19drm/gma500: fix error checkdrm-misc-next-2020-08-20Tom Rix1-1/+1
Reviewing this block of code in cdv_intel_dp_init() ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ... cdv_intel_edp_panel_vdd_off(gma_encoder); if (ret == 0) { /* if this fails, presume the device is a ghost */ DRM_INFO("failed to retrieve link info, disabling eDP\n"); drm_encoder_cleanup(encoder); cdv_intel_dp_destroy(connector); goto err_priv; } else { The (ret == 0) is not strict enough. cdv_intel_dp_aux_native_read() returns > 0 on success otherwise it is failure. So change to <= Fixes: d112a8163f83 ("gma500/cdv: Add eDP support") Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200805205911.20927-1-trix@redhat.com
2020-08-19drm: gma500: Convert to GPIO descriptorsLinus Walleij6-29/+49
Finalize he conversion of GMA500 to use only GPIO descriptors. The GPIO look-up-table is associated with the device directly in the GMA500 Medfield chip driver since no explicit platform type device (such as in x86/platform/intel-mid) exists: the GMA500 probes directly from the PCI device. Apparently GPIOs 128 and 34 are used on all of these so just go ahead and register those for resetting the DSI pipes. Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200703125901.513476-1-linus.walleij@linaro.org
2020-08-19drm: ast: fix double __iomem sparse warningRandy Dunlap1-1/+2
sparse complains about having 2 "__iomem" attributes on the same line where only one is needed since the first one applies to everything up to the ending ';'. However, to make it clear(er) that both of these pointers are "__iomem", use separate lines for them. ../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: warning: duplicate [noderef] ../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: error: multiple address space given: __iomem & __iomem Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/a8185578-a69a-16b0-6fdf-f4e46bc4f61f@infradead.org
2020-08-19virtio: fix build for configs without dma-bufsDavid Stevens1-0/+1
Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David Stevens <stevensd@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200819031011.310180-1-stevensd@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-18drm/panel: Use dev_ based loggingSam Ravnborg15-345/+200
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-6-sam@ravnborg.org
2020-08-18drm/panel: sitronix: Use dev_ based loggingSam Ravnborg2-44/+27
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-5-sam@ravnborg.org
2020-08-18drm/panel: raydium: Use dev_ based loggingSam Ravnborg2-28/+23
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-4-sam@ravnborg.org
2020-08-18drm/panel: leadtek: Use dev_ based loggingSam Ravnborg2-70/+37
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-3-sam@ravnborg.org
2020-08-18drm/panel: samsung: Use dev_ based loggingSam Ravnborg6-36/+21
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Guido Günther <agx@sigxcpu.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-2-sam@ravnborg.org
2020-08-18drm/panel: Add panel driver for the Mantix MLAF057WE51-X DSI panelGuido Günther3-0/+340
The panel uses a Focaltech FT8006p, the touch part is handled by the already existing edt-ft5x06. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/118c6e03dd0ff6e86e495579102cbf7d0cfca6f4.1597652012.git.agx@sigxcpu.org
2020-08-18drm/malidp: Use struct drm_gem_object_funcs.get_sg_table internallyThomas Zimmermann1-1/+1
The malidp driver uses GEM object functions for callbacks. Fix it to use them internally as well. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Daniel Vetter <daniel@ffwll.ch> Fixes: ecdd6474644f ("drm/malidp: Use GEM CMA object functions") Cc: Thomas Zimmermann <tzimmermann@suse.de> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200807111022.12117-1-tzimmermann@suse.de
2020-08-18Merge v5.9-rc1 into drm-misc-nextMaxime Ripard37-255/+235
Sam needs 5.9-rc1 to have dev_err_probe in to merge some patches. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-08-18drm/sun4i: Constify static structsRikard Falkeborn12-15/+15
A number of static variables are not modified and can be made const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200804215337.54594-1-rikard.falkeborn@gmail.com
2020-08-18drm/virtio: Support virtgpu exported resourcesDavid Stevens5-3/+176
Add support for UUID-based resource sharing mechanism to virtgpu. This implements the new virtgpu commands and hooks them up to dma-buf's get_uuid callback. Signed-off-by: David Stevens <stevensd@chromium.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200818071343.3461203-4-stevensd@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-17drm/qxl: Replace deprecated function in qxl_displaySidong Yang1-10/+11
Replace deprecated function drm_modeset_lock/unlock_all with helper function DRM_MODESET_LOCK_ALL_BEGIN/END. Signed-off-by: Sidong Yang <realwakka@gmail.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200524022624.10363-1-realwakka@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-17drm/virtio: Use struct_size() helper in kmalloc()Gustavo A. R. Silva1-2/+1
Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. This code was detected with the help of Coccinelle and, audited and fixed manually. Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200617215707.GA16785@embeddedor Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-17drm/qxl: don't take vga ports on rev5+Gerd Hoffmann1-3/+3
qemu 5.0 introduces a new qxl hardware revision 5. Unlike revision 4 (and below) the device doesn't switch back into vga compatibility mode when someone touches the vga ports. So we don't have to reserve the vga ports any more to avoid that happening. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20200807105501.24599-1-kraxel@redhat.com
2020-08-17drm/virtio: Revert "drm/virtio: Call the right shmem helpers"Gurchetan Singh1-1/+7
This reverts commit d323bb44e4d23802eb25d13de1f93f2335bd60d0. Fixes a double-free regression: [ 4.357928] drm_gem_shmem_free_object+0xb4/0x100 [ 4.358983] virtio_gpu_dequeue_ctrl_func+0xd9/0x290 [ 4.360343] process_one_work+0x1d2/0x3a0 [ 4.361581] worker_thread+0x45/0x3c0 [ 4.362645] kthread+0xf6/0x130 [ 4.363543] ? process_one_work+0x3a0/0x3a0 [ 4.364770] ? kthread_park+0x80/0x80 [ 4.365799] ret_from_fork+0x35/0x40 [ 4.367103] Modules linked in: [ 4.367958] CR2: 0000000000000018 [ 4.368857] ---[ end trace db84f7a2974d5c79 ]--- [ 4.370118] RIP: 0010:dma_direct_unmap_sg+0x1f/0x60 In addition, virtio has it's own set of dma-ops so there's not an obviously clean way to transition to shmem helpers. Fixes: d323bb44e4d2 ("drm/virtio: Call the right shmem helpers") Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200615230500.551-1-gurchetansingh@chromium.org Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-17drm/virtgpu: remove redundant assignments to width and heightColin Ian King1-2/+0
Variables width and height are being assigned values that are never read. The assignments are redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200701134154.549112-1-colin.king@canonical.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-08-16drm/panel-simple: Read panel orientationDmitry Osipenko1-0/+11
The panel orientation needs to parsed from a device-tree and assigned to the panel's connector in order to make orientation property available to userspace. That's what this patch does for the panel-simple driver. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-5-digetx@gmail.com
2020-08-16drm/panel: lvds: Read panel orientationDmitry Osipenko1-0/+9
The panel orientation needs to parsed from a device-tree and assigned to the panel's connector in order to make orientation property available to userspace. That's what this patch does for the generic LVDS panel. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-4-digetx@gmail.com
2020-08-16drm/panel: Read panel orientation for BOE TV101WUM-NL6Derek Basehore1-0/+8
This reads the DT setting for the panel rotation to set the panel orientation in the get_modes callback. Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Derek Basehore <dbasehore@chromium.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-3-digetx@gmail.com
2020-08-16drm/panel: Add helper for reading DT rotationDerek Basehore1-0/+43
This adds a helper function for reading the rotation (panel orientation) from the device tree. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Derek Basehore <dbasehore@chromium.org> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200813215609.28643-2-digetx@gmail.com
2020-08-15drm/panel: ilitek-ili9881c: add support for Feixin K101-IM2BYL02 panelIcenowy Zheng1-0/+217
Feixin K101-IM2BYL02 is a new panel by Feixin designed as a replacement to their K101-IM2BA02 panel. This panel utilizes the Ilitek ILI9881C controller. Add this panel's initialzation sequence and timing to ILI9881C driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200719171007.276383-2-icenowy@aosc.io
2020-08-15drm/panel: ilitek-ili9881c: prepare for adding support for extra panelsIcenowy Zheng1-19/+37
There're more panels with ILI9881C controller than the Bananapi one supported by this driver. Extract the mode and init sequence part, to prepare the driver for adding new panels. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200719170411.275812-2-icenowy@aosc.io
2020-08-15drm/panel: simple: Add 50Hz mode for sharp,ls020b1dd01dPaul Cercueil1-0/+12
Add a perfect 50.00 Hz frame rate mode to the list of available modes for the Sharp LS020B1DD01D panel. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-6-paul@crapouillou.net
2020-08-15drm/panel: simple: Tweak timings of sharp,ls020b1dd01d for perfect 60HzPaul Cercueil1-7/+7
Modify the video mode in order to obtain a perfect 60.00 Hz frame rate using a 3 MHz pixel clock. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-5-paul@crapouillou.net
2020-08-15drm/panel: simple: Convert sharp,ls020b1dd01d from timings to videomodePaul Cercueil1-13/+15
Convert the Sharp LS020B1DD01D panel entry from using a struct display_timing to using a struct drm_display_mode, as display_timing seems to be the old and legacy format. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-4-paul@crapouillou.net
2020-08-15drm/panel: novatek,nt39016: Add missing CR to error messagesPaul Cercueil1-9/+9
If you pass a string that is not terminated with a carriage return to dev_err(), it will eventually be printed with a carriage return, but not right away, since the kernel will wait for a pr_cont(). Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-3-paul@crapouillou.net
2020-08-15drm/panel: novatek,nt39016: Handle backlight the standard wayPaul Cercueil1-12/+4
Instead of manipulating the backlight directly in this driver, register it in the probe using drm_panel_of_backlight() and let the drm_panel framework code handle it. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200811002240.55194-2-paul@crapouillou.net
2020-08-15drm/mcde: Retry DSI read/write transactionsLinus Walleij1-66/+92
The vendor driver makes a few retries on read DSI transactions, something that is needed especially in case of read (such as reading the panel MTP ID) while the panel is running in video mode. This happens on the Samsung s6e63m0 panel on the Golden device. Retry reads and writes alike three times. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200814194451.3494294-1-linus.walleij@linaro.org
2020-08-14Merge tag 'pwm/for-5.9-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm Pull pwm updates from Thierry Reding: "The majority of this batch is conversion of the PWM period and duty cycle to 64-bit unsigned integers, which is required so that some types of hardware can generate the full range of signals that they're capable of. The remainder is mostly minor fixes and cleanups" * tag 'pwm/for-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: pwm: bcm-iproc: handle clk_get_rate() return pwm: Replace HTTP links with HTTPS ones pwm: omap-dmtimer: Repair pwm_omap_dmtimer_chip's broken kerneldoc header pwm: mediatek: Provide missing kerneldoc description for 'soc' arg pwm: bcm-kona: Remove impossible comparison when validating duty cycle pwm: bcm-iproc: Remove impossible comparison when validating duty cycle pwm: iqs620a: Use lowercase hexadecimal literals for consistency pwm: Convert period and duty cycle to u64 clk: pwm: Use 64-bit division function backlight: pwm_bl: Use 64-bit division function pwm: sun4i: Use nsecs_to_jiffies to avoid a division pwm: sifive: Use 64-bit division macro pwm: iqs620a: Use 64-bit division pwm: imx27: Use 64-bit division macro pwm: imx-tpm: Use 64-bit division macro pwm: clps711x: Use 64-bit division macro hwmon: pwm-fan: Use 64-bit division macro drm/i915: Use 64-bit division macro
2020-08-14Merge tag 'for-linus-5.9-rc1b-tag' of ↵Linus Torvalds5-11/+15
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - Remove support for running as 32-bit Xen PV-guest. 32-bit PV guests are rarely used, are lacking security fixes for Meltdown, and can be easily replaced by PVH mode. Another series for doing more cleanup will follow soon (removal of 32-bit-only pvops functionality). - Fixes and additional features for the Xen display frontend driver. * tag 'for-linus-5.9-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: drm/xen-front: Pass dumb buffer data offset to the backend xen: Sync up with the canonical protocol definition in Xen drm/xen-front: Add YUYV to supported formats drm/xen-front: Fix misused IS_ERR_OR_NULL checks xen/gntdev: Fix dmabuf import with non-zero sgt offset x86/xen: drop tests for highmem in pv code x86/xen: eliminate xen-asm_64.S x86/xen: remove 32-bit Xen PV guest support
2020-08-13drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panelLaurent Pinchart1-1/+1
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel, set the bus format to MEDIA_BUS_FMT_RGB666_1X18. Fixes: 725c9d40f3fe ("drm/panel: Add support for OrtusTech COM43H4M85ULC panel") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200812220244.24500-1-laurent.pinchart@ideasonboard.com
2020-08-13drm/xen-front: Pass dumb buffer data offset to the backendOleksandr Andrushchenko3-4/+7
While importing a dmabuf it is possible that the data of the buffer is put with offset which is indicated by the SGT offset. Respect the offset value and forward it to the backend. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-13drm/mcde: Enable the DSI link with displayLinus Walleij3-35/+47
The MCDE DSI link hardware which is modeled like a bridge in DRM, connected further to the panel bridge, creating a pipeline. We have been using the .pre_enable(), .enable(), .disable() and .post_disable() callbacks from the bridge to set this up in a chained manner: first the display controller goes online and then in successive order each bridge in the pipeline. Inside DRM it works like this: drm_atomic_helper_commit_tail() drm_atomic_helper_commit_modeset_enables() struct drm_crtc_helper_funcs .atomic_enable() struct drm_simple_display_pipe_funcs .enable() MCDE display enable call drm_atomic_bridge_chain_enable() struct drm_bridge_funcs .pre_enable() mcde_dsi_bridge_pre_enable() panel_bridge_pre_enable() struct drm_panel_funcs .prepare() struct drm_bridge_funcs .enable() mcde_dsi_bridge_enable() panel_bridge_enable() struct drm_panel_funcs .enable() A similar sequence is executed for disabling. Unfortunately this is not what the hardware needs: at a certain stage in the enablement of the display controller the DSI link needs to come up to support video mode, else something (like a FIFO flow) locks up the hardware and we never get picture. Fix this by simply leaving the pre|enable and post|disable callbacks unused, and establish two cross-calls from the display controller to bring up the DSI link at the right place in the display bring-up sequence and vice versa in the shutdown sequence. For command mode displays, it works just fine to also enable the display flow early. The only time we hold it back right now is in one-shot mode, on-demand display updates. When combined with the previous patch and some patches for the S6E63M0 display controller to support DSI mode, this gives working display on the Samsung GT-I8190 (Golden) phone. It has also been tested working on the Samsung GT-S7710 (Skomer) phone. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-4-linus.walleij@linaro.org
2020-08-13drm/mcde: Fix display pipeline restartLinus Walleij4-82/+133
To make sure that the MCDE is in a reasonable state during set-up, perform a reset by power cycling the block by dropping the on-chip regulator reference after probe. The display subsystem (DSS) has no dedicated reset line so dropping the EPOD regulator is the only real way of resetting it. We introduce code to enable and disable the regulator in the display enable/disable callbacks. We move the generic MCDE setup such as muxing of DPI signals and masking of interrupts to the display handling. When we drop the power to the whole display subsystem, not only MCDE but also the DSI links lose their state. Therefore we move the DSI block reset and hardware initialization code to the mcde_dsi_bridge_pre_enable() callback so this happens every time we start up the bridge, as we may have lost the power. We move the final disablement of the interrupts and clocks to the mcde_dsi_bridge_post_disable() callback rather than have it in the mcde_dsi_bridge_disable() callback, as some control messages may still be sent over the DSI host after the bridge has been shut down. This (together with a patch for the corresponding panel) makes the Samsung GT-S7710 successfully disable and re-enable its display, cutting all power while disabled and re-initializing the hardware when coming back up. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-3-linus.walleij@linaro.org
2020-08-13drm/mcde: Support using DSI in LP modeLinus Walleij1-4/+6
It is possible to set a flag in the struct mipi_dsi_device so the panel is handled in low power (LP) mode. Some displays only support this mode and it is also good for testing. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-2-linus.walleij@linaro.org
2020-08-13drm/mcde: Improve pixel fetcher FIFO depth settingLinus Walleij1-4/+30
The pixel fetcher FIFO depth was just hardcoded to 48 which works fine as long as the framebuffer is 32BPP and the DSI output is RGB888. We will need more elaborate handling for some buffer formats and displays, so start to improve this function by setting reasonable defaults for 32, 24 and 16 BPP framebuffers. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200808223122.1492124-1-linus.walleij@linaro.org
2020-08-13drm/mcde: Fix display data flow controlLinus Walleij4-50/+111
Revamp the way that the flow of data to the display is defined. I realized that the hardware supports something like 5 different modes of flow: oneshot, command with TE IRQ, command with BTA (bus turn around) and TE IRQ, video with TE IRQ and video without TE IRQ instead synchronizing to the output of the MCDE DSI formatter. Like before the selection of the type of flow is done from the DSI driver when we attach it to the MCDE and we get to know what the display wants. The new video mode synchronization method from the MCDE DSI formatter is used on some upstream devices such as Golden. This is the new default for video mode: stateless panels do not as a rule generate TE IRQs. Another semantic change is that we stop sending a TE request before every command when sending data to a display in command mode: this should only be explicitly requested when using BTA, according to the vendor driver. This has been tested and works fine with the command mode displays I have. (All that are supported upstream.) Reported-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Cc: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200729090915.252730-2-linus.walleij@linaro.org
2020-08-13drm/mcde: Rename flow functionLinus Walleij1-2/+2
The function mcde_display_send_one_frame() has a historical name that stems from being implemented when the driver only supported single frame updates. Rename it mcde_start_flow() so that it reflects the current usage. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200729090915.252730-1-linus.walleij@linaro.org
2020-08-13drm/xen-front: Add YUYV to supported formatsOleksandr Andrushchenko1-0/+1
Add YUYV to supported formats, so the frontend can work with the formats used by cameras and other HW. Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: Noralf Trønnes <noralf@tronnes.org> Link: https://lore.kernel.org/r/20200813062113.11030-4-andr2000@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-13drm/xen-front: Fix misused IS_ERR_OR_NULL checksOleksandr Andrushchenko3-7/+7
The patch c575b7eeb89f: "drm/xen-front: Add support for Xen PV display frontend" from Apr 3, 2018, leads to the following static checker warning: drivers/gpu/drm/xen/xen_drm_front_gem.c:140 xen_drm_front_gem_create() warn: passing zero to 'ERR_CAST' drivers/gpu/drm/xen/xen_drm_front_gem.c 133 struct drm_gem_object *xen_drm_front_gem_create(struct drm_device *dev, 134 size_t size) 135 { 136 struct xen_gem_object *xen_obj; 137 138 xen_obj = gem_create(dev, size); 139 if (IS_ERR_OR_NULL(xen_obj)) 140 return ERR_CAST(xen_obj); Fix this and the rest of misused places with IS_ERR_OR_NULL in the driver. Fixes: c575b7eeb89f: "drm/xen-front: Add support for Xen PV display frontend" Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200813062113.11030-3-andr2000@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-13drm/hisilicon: Fix build error of no type of module_initTian Tao1-0/+1
Add missing include to fix build error: hibmc_drm_drv.c:385:1: warning: data definition has no type or storage class [enabled by default] hibmc_drm_drv.c:385:1: error: type defaults to ‘int’ in declaration of ‘module_init’ [-Werror=implicit-int] hibmc_drm_drv.c:385:1: warning: parameter names (without types) in function of ‘module_exit’ [-Werror=implicit-int] hibmc_drm_drv.c:385:292:1: warning: parameter names (without types) in function declaration [enabled by default] Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1597289955-27381-1-git-send-email-tiantao6@hisilicon.com
2020-08-12drm/bridge: tc358762: Add basic driver for Toshiba TC358762 DSI-to-DPI bridgeMarek Vasut3-0/+289
Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived from tc358764 driver and panel-raspberrypi-touchscreen. This driver is meant to replace the panel-raspberrypi-touchscreen too, as the bridge connection can be described in DT too. Signed-off-by: Marek Vasut <marex@denx.de> Cc: dri-devel@lists.freedesktop.org Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh+dt@kernel.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: devicetree@vger.kernel.org Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam.ravnborg@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200809105705.6334-2-marex@denx.de
2020-08-12Merge tag 'drm-next-2020-08-12' of git://anongit.freedesktop.org/drm/drmLinus Torvalds78-363/+895
Pull drm fixes from Dave Airlie: "This has a few vmwgfx regression fixes we hit from the merge window (one in TTM), it also has a bunch of amdgpu fixes along with a scattering everywhere else. core: - Fix drm_dp_mst_port refcount leaks in drm_dp_mst_allocate_vcpi - Remove null check for kfree in drm_dev_release. - Fix DRM_FORMAT_MOD_AMLOGIC_FBC definition. - re-added docs for drm_gem_flink_ioctl() - add orientation quirk for ASUS T103HAF ttm: - ttm: fix page-offset calculation within TTM - revert patch causing vmwgfx regressions fbcon: - Fix a fbcon OOB read in fbdev, found by syzbot. vga: - Mark vga_tryget static as it's not used elsewhere. amdgpu: - Re-add spelling typo fix - Sienna Cichlid fixes - Navy Flounder fixes - DC fixes - SMU i2c fix - Power fixes vmwgfx: - regression fixes for modesetting crashes - misc fixes xlnx: - Small fixes to xlnx. omap: - Fix mode initialization in omap_connector_mode_valid(). - force runtime PM suspend on system suspend tidss: - fix modeset init for DPI panels" * tag 'drm-next-2020-08-12' of git://anongit.freedesktop.org/drm/drm: (70 commits) drm/ttm: revert "drm/ttm: make TT creation purely optional v3" drm/vmwgfx: fix spelling mistake "Cant" -> "Can't" drm/vmwgfx: fix spelling mistake "Cound" -> "Could" drm/vmwgfx/ldu: Use drm_mode_config_reset drm/vmwgfx/sou: Use drm_mode_config_reset drm/vmwgfx/stdu: Use drm_mode_config_reset drm/vmwgfx: Fix two list_for_each loop exit tests drm/vmwgfx: Use correct vmw_legacy_display_unit pointer drm/vmwgfx: Use struct_size() helper drm/amdgpu: Fix bug where DPM is not enabled after hibernate and resume drm/amd/powerplay: put VCN/JPEG into PG ungate state before dpm table setup(V3) drm/amd/powerplay: update swSMU VCN/JPEG PG logics drm/amdgpu: use mode1 reset by default for sienna_cichlid drm/amdgpu/smu: rework i2c adpater registration drm/amd/display: Display goes blank after inst drm/amd/display: Change null plane state swizzle mode to 4kb_s drm/amd/display: Use helper function to check for HDMI signal drm/amd/display: AMD OUI (DPCD 0x00300) skipped on some sink drm/amd/display: Fix logger context drm/amd/display: populate new dml variable ...
2020-08-12Merge drm/drm-next into drm-misc-nextThomas Zimmermann997-22862/+260531
Backmerging drm-next into drm-misc-next for nouveau and panel updates. Resolves a conflict between ttm and nouveau, where struct ttm_mem_res got renamed to struct ttm_resource. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2020-08-12Merge branch 'akpm' (patches from Andrew)Linus Torvalds1-1/+1
Merge more updates from Andrew Morton: - most of the rest of MM (memcg, hugetlb, vmscan, proc, compaction, mempolicy, oom-kill, hugetlbfs, migration, thp, cma, util, memory-hotplug, cleanups, uaccess, migration, gup, pagemap), - various other subsystems (alpha, misc, sparse, bitmap, lib, bitops, checkpatch, autofs, minix, nilfs, ufs, fat, signals, kmod, coredump, exec, kdump, rapidio, panic, kcov, kgdb, ipc). * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (164 commits) mm/gup: remove task_struct pointer for all gup code mm: clean up the last pieces of page fault accountings mm/xtensa: use general page fault accounting mm/x86: use general page fault accounting mm/sparc64: use general page fault accounting mm/sparc32: use general page fault accounting mm/sh: use general page fault accounting mm/s390: use general page fault accounting mm/riscv: use general page fault accounting mm/powerpc: use general page fault accounting mm/parisc: use general page fault accounting mm/openrisc: use general page fault accounting mm/nios2: use general page fault accounting mm/nds32: use general page fault accounting mm/mips: use general page fault accounting mm/microblaze: use general page fault accounting mm/m68k: use general page fault accounting mm/ia64: use general page fault accounting mm/hexagon: use general page fault accounting mm/csky: use general page fault accounting ...
2020-08-12mm/gup: remove task_struct pointer for all gup codePeter Xu1-1/+1
After the cleanup of page fault accounting, gup does not need to pass task_struct around any more. Remove that parameter in the whole gup stack. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Link: http://lkml.kernel.org/r/20200707225021.200906-26-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-08-12drm/radeon: drop superflous AGP handlingChristian König1-19/+2
The object flags created in radeon_ttm_placement_from_domain take care that we use the correct caching for AGP, this is just superflous. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/384336/?series=80346&rev=1
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 08:37:08 +0000