Age | Commit message (Collapse) | Author | Files | Lines |
|
This optional callback is useful for setting properties which depends
only on current mode. Such properties are width, height and interlaced
output.
These properties are currently set in update layer callback for primary
plane which is less than ideal. More about that in follow up patches,
which will migrate that code to this newly defined callback.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220424162633.12369-7-samuel@sholland.org
|
|
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's start convert all the remaining helpers to provide a consistent
interface, starting with the CRTC's atomic_begin and atomic_flush.
The conversion was done using the coccinelle script below, built tested on
all the drivers and actually tested on vc4.
virtual report
@@
struct drm_crtc_helper_funcs *FUNCS;
identifier old_crtc_state, old_state;
identifier crtc;
identifier f;
@@
f(struct drm_crtc_state *old_crtc_state)
{
...
struct drm_atomic_state *old_state = old_crtc_state->state;
<...
- FUNCS->atomic_begin(crtc, old_crtc_state);
+ FUNCS->atomic_begin(crtc, old_state);
...>
}
@@
struct drm_crtc_helper_funcs *FUNCS;
identifier old_crtc_state, old_state;
identifier crtc;
identifier f;
@@
f(struct drm_crtc_state *old_crtc_state)
{
...
struct drm_atomic_state *old_state = old_crtc_state->state;
<...
- FUNCS->atomic_flush(crtc, old_crtc_state);
+ FUNCS->atomic_flush(crtc, old_state);
...>
}
@@
struct drm_crtc_helper_funcs *FUNCS;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
identifier dev, state;
identifier f;
@@
f(struct drm_device *dev, struct drm_atomic_state *state, ...)
{
<...
- FUNCS->atomic_begin(crtc, crtc_state);
+ FUNCS->atomic_begin(crtc, state);
...>
}
@@
struct drm_crtc_helper_funcs *FUNCS;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
identifier dev, state;
identifier f;
@@
f(struct drm_device *dev, struct drm_atomic_state *state, ...)
{
<...
- FUNCS->atomic_flush(crtc, crtc_state);
+ FUNCS->atomic_flush(crtc, state);
...>
}
@@
identifier crtc, old_state;
@@
struct drm_crtc_helper_funcs {
...
- void (*atomic_begin)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_begin)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
- void (*atomic_flush)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_flush)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
}
@ crtc_atomic_func @
identifier helpers;
identifier func;
@@
(
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_begin = func,
...,
};
|
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_flush = func,
...,
};
)
@ ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@
void func(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
... when != old_state
}
@ adds_old_state depends on crtc_atomic_func && !ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@
void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
{
+ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
...
}
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@
void func(...)
{
...
- T state = E;
+ T crtc_state = E;
<+...
- state
+ crtc_state
...+>
}
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@
void func(...)
{
...
- T state;
+ T crtc_state;
<+...
- state
+ crtc_state
...+>
}
@@
identifier old_state;
identifier crtc;
@@
void vc4_hvs_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{
+ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
...
}
@@
identifier old_state;
identifier crtc;
@@
void vc4_hvs_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
);
@@
identifier old_state;
identifier crtc;
@@
void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{
...
}
@@
identifier old_state;
identifier crtc;
@@
void vmw_du_crtc_atomic_begin(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
);
@@
identifier old_state;
identifier crtc;
@@
void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{
...
}
@@
identifier old_state;
identifier crtc;
@@
void vmw_du_crtc_atomic_flush(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
);
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier old_state;
identifier crtc;
@@
void func(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_old_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_old_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-2-maxime@cerno.tech
|
|
The current atomic helpers have either their object state being passed as
an argument or the full atomic state.
The former is the pattern that was done at first, before switching to the
latter for new hooks or when it was needed.
Let's start convert all the remaining helpers to provide a consistent
interface, starting with the CRTC's atomic_check.
The conversion was done using the coccinelle script below,
built tested on all the drivers and actually tested on vc4.
virtual report
@@
struct drm_crtc_helper_funcs *FUNCS;
struct drm_crtc *crtc;
struct drm_crtc_state *crtc_state;
identifier dev, state;
identifier ret, f;
@@
f(struct drm_device *dev, struct drm_atomic_state *state)
{
<...
- ret = FUNCS->atomic_check(crtc, crtc_state);
+ ret = FUNCS->atomic_check(crtc, state);
...>
}
@@
identifier crtc, new_state;
@@
struct drm_crtc_helper_funcs {
...
- int (*atomic_check)(struct drm_crtc *crtc, struct drm_crtc_state *new_state);
+ int (*atomic_check)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
}
@ crtc_atomic_func @
identifier helpers;
identifier func;
@@
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_check = func,
...,
};
@ ignores_new_state @
identifier crtc_atomic_func.func;
identifier crtc, new_state;
@@
int func(struct drm_crtc *crtc,
struct drm_crtc_state *new_state)
{
... when != new_state
}
@ adds_new_state depends on crtc_atomic_func && !ignores_new_state @
identifier crtc_atomic_func.func;
identifier crtc, new_state;
@@
int func(struct drm_crtc *crtc, struct drm_crtc_state *new_state)
{
+ struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc);
...
}
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@
int func(...)
{
...
- T state = E;
+ T crtc_state = E;
<+...
- state
+ crtc_state
...+>
}
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@
int func(...)
{
...
- T state;
+ T crtc_state;
<+...
- state
+ crtc_state
...+>
}
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier new_state;
identifier crtc;
@@
int func(struct drm_crtc *crtc,
- struct drm_crtc_state *new_state
+ struct drm_atomic_state *state
)
{ ... }
@@
identifier new_state;
identifier crtc;
@@
int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
- struct drm_crtc_state *new_state
+ struct drm_atomic_state *state
)
{
+ struct drm_crtc_state *new_state = drm_atomic_get_new_crtc_state(state, crtc);
...
}
@@
identifier new_state;
identifier crtc;
@@
int vmw_du_crtc_atomic_check(struct drm_crtc *crtc,
- struct drm_crtc_state *new_state
+ struct drm_atomic_state *state
);
@ include depends on adds_new_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_new_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028123222.1732139-1-maxime@cerno.tech
|
|
If the CRTC driver ever needs to access the full DRM state, it can't do so
at atomic_enable / atomic_disable time since drm_atomic_helper_swap_state
will have cleared the pointer from the struct drm_crtc_state to the struct
drm_atomic_state before calling those hooks.
In order to allow that, let's pass the full DRM state to atomic_enable and
atomic_disable. The conversion was done using the coccinelle script below,
built tested on all the drivers and actually tested on vc4.
virtual report
@@
struct drm_crtc_helper_funcs *FUNCS;
identifier dev, state;
identifier crtc, crtc_state;
@@
disable_outputs(struct drm_device *dev, struct drm_atomic_state *state)
{
<...
- FUNCS->atomic_disable(crtc, crtc_state);
+ FUNCS->atomic_disable(crtc, state);
...>
}
@@
struct drm_crtc_helper_funcs *FUNCS;
identifier dev, state;
identifier crtc, crtc_state;
@@
drm_atomic_helper_commit_modeset_enables(struct drm_device *dev, struct drm_atomic_state *state)
{
<...
- FUNCS->atomic_enable(crtc, crtc_state);
+ FUNCS->atomic_enable(crtc, state);
...>
}
@@
identifier crtc, old_state;
@@
struct drm_crtc_helper_funcs {
...
- void (*atomic_enable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_enable)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
- void (*atomic_disable)(struct drm_crtc *crtc, struct drm_crtc_state *old_state);
+ void (*atomic_disable)(struct drm_crtc *crtc, struct drm_atomic_state *state);
...
}
@ crtc_atomic_func @
identifier helpers;
identifier func;
@@
(
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_enable = func,
...,
};
|
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_disable = func,
...,
};
)
@ ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@
void func(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
... when != old_state
}
@ adds_old_state depends on crtc_atomic_func && !ignores_old_state @
identifier crtc_atomic_func.func;
identifier crtc, old_state;
@@
void func(struct drm_crtc *crtc, struct drm_crtc_state *old_state)
{
+ struct drm_crtc_state *old_state = drm_atomic_get_old_crtc_state(state, crtc);
...
}
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
expression E;
type T;
@@
void func(...)
{
...
- T state = E;
+ T crtc_state = E;
<+...
- state
+ crtc_state
...+>
}
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
type T;
@@
void func(...)
{
...
- T state;
+ T crtc_state;
<+...
- state
+ crtc_state
...+>
}
@ depends on crtc_atomic_func @
identifier crtc_atomic_func.func;
identifier old_state;
identifier crtc;
@@
void func(struct drm_crtc *crtc,
- struct drm_crtc_state *old_state
+ struct drm_atomic_state *state
)
{ ... }
@ include depends on adds_old_state @
@@
#include <drm/drm_atomic.h>
@ no_include depends on !include && adds_old_state @
@@
+ #include <drm/drm_atomic.h>
#include <drm/...>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/845aa10ef171fc0ea060495efef142a0c13f7870.1602161031.git-series.maxime@cerno.tech
|
|
Drop use of the deprecated drmP.h header file.
While touching the list of include file, use the typical order of the
blocks:
\#include <linux/*>
\#include <video/*>
\#include <drm/*>
\#include ""
Within each block, sort the files.
Include necessary files to fix build after the drmP.h removal.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-6-sam@ravnborg.org
|
|
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 3029 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
|
|
Use drm_crtc_mask() where appropriate.
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-8-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Linux 4.16-rc7
This was requested by Daniel, and things were getting
a bit hard to reconcile, most of the conflicts were
trivial though.
|
|
Make sure that the CRTC code will call the enable/disable_vblank hooks.
Otherwise, since the refcounting will be off, we might end up in a
situation where the vblank management functions are called while the CRTC
is off.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180221125703.4595-3-maxime.ripard@bootlin.com
|
|
Now that we have a driver, we can make use of it. This is done by
adding a flag to our custom plane state that will trigger whether we should
use the frontend on that particular plane or not.
The rest is just plumbing to set up the backend to not perform the DMA but
receive its data from the frontend.
Note that we're still not making any use of the frontend itself, as no one
is setting the flag yet.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cdffc25eab2d817820cc78cbd24f1f4b99902014.1516613040.git-series.maxime.ripard@free-electrons.com
|
|
We have to implement some display engine specific behaviours in
atomic_begin. Let's add a function for that.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/44110951ae0cc13767fefc7fc1d9e2ec782d0a40.1516613040.git-series.maxime.ripard@free-electrons.com
|
|
We have some restrictions on what the planes and CRTC can provide that are
tied to only one generation of display engines.
For example, on the first generation, we can only have one YUV plane or one
plane that uses the frontend output.
Let's allow our engines to provide an atomic_check callback to validate the
current configuration.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e5f5f144e5c20d348cdb29933ae876c105bec017.1516613040.git-series.maxime.ripard@free-electrons.com
|
|
Just like we did for the TCON enable and disable, for historical reasons we
used to rely on the encoders calling the TCON mode_set function, while the
CRTC has a callback for that.
Let's implement it in order to reduce the boilerplate code.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/faa3a4d511039af1d116270dfef3a8b60ca3591e.1508231063.git-series.maxime.ripard@free-electrons.com
|
|
So far, we've required all the TCON-connected encoders to call the TCON
enable and disable functions.
This was made this way because in the RGB/LVDS case, the TCON is the CRTC
and the encoder. However, in all the other cases (HDMI, TV, DSI, etc.), we
have another encoder down the road that needs to be programmed.
We also needed to know which channel the encoder is connected to, which is
encoder-specific.
The CRTC's enable and disable callbacks can work just fine for our use
case, and we can get the channel to use just by looking at the type of
encoder, since that is fixed. Implement those callbacks, which will
remove some of the encoder boilerplate.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/90b4396e19b3eca61b2ebfdae0672074b88ad74d.1508231063.git-series.maxime.ripard@free-electrons.com
|
|
The CRTC .disable() helper operation is deprecated for atomic drivers,
the new .atomic_disable() helper operation being preferred. Convert all
atomic drivers to .atomic_disable() to avoid cargo-cult use of
.disable() in new drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-3-laurent.pinchart+renesas@ideasonboard.com
|
|
The old state is useful for drivers that need to perform operations at
enable time that depend on the transition between the old and new
states.
While at it, rename the operation to .atomic_enable() to be consistent
with .atomic_disable(), as the .enable() operation is used by atomic
helpers only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> # for sun4i
Acked-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-drm and mediatek
Acked-by: Alexey Brodkin <abrodkin@synopsys.com> # for arcpgu
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> # for atmel-hlcdc
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> # for hdlcd and mali-dp
Acked-by: Stefan Agner <stefan@agner.ch> # for fsl-dcu
Tested-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Philippe Cornu <philippe.cornu@st.com> # for stm
Acked-by: Vincent Abriou <vincent.abriou@st.com> # for sti
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> # for vmwgfx
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170630093646.7928-2-laurent.pinchart+renesas@ideasonboard.com
|
|
As we are going to add support for the Allwinner DE2 engine in sun4i-drm
driver, we will finally have two types of display engines -- the DE1
backend and the DE2 mixer. They both do some display blending and feed
graphics data to TCON, and is part of the "Display Engine" called by
Allwinner, so I choose to call them both "engine" here.
Abstract the engine type to a new struct with an ops struct, which contains
functions that should be called outside the engine-specified code (in
TCON, CRTC or TV Encoder code).
In order to preserve bisectability, we also switch the backend and layer
code in its own module.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
As we are going to add support for the Allwinner DE2 Mixer in sun4i-drm
driver, we will finally have two types of layers.
Each layer is bound to a drm_plane that is CRTC-specific, so we create
them when initializing CRTC (calling sun4i_layers_init, which will be
generalized in next patch). The drm_plane's will be used when creating
CRTC, but the CRTC initialization code do not care other properties of
the layer, so we let the sun4i_layers_init function return drm_plane's
only.
As we have no need to trace the layers after the CRTC is properly
created, we drop the layers pointer in sun4i_crtc struct.
Doing this uncouples the CRTC code from the type of layer (the
sun4i_layers_init function name is still hardcoded and will be changed
in the next patch), so that we can finally gain support for the
mixer in DE2, which has different layers.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
sun4i_layer only controls the backend hardware block of the display
pipeline.
Pass pointers to the underlying backend in the layer init function,
instead of trying to fetch it from the drm_device structure. This
avoids the headache of trying to figure out which device the layers
actually belong to.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
sun4i_crtc controls the backend and tcon hardware blocks of the display
pipeline.
Pass pointers to the underlying devices into the crtc init function,
instead of trying to fetch them from the drm_device structure. This
avoids the headache of trying to figure out which devices the crtc
is actually associated with.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
A pointer to the underlying tcon of the crtc was added to the sun4i_crtc
structure in "drm/sun4i: Add backend and tcon pointers to sun4i_crtc".
However the crtc init function was still using the copy from sun4i_drv
to set drm_crtc.port. This was an oversight when the patches were
reordered.
Switch to using the embedded tcon pointer to get the tcon's ouptut port
and assign it to drm_crtc.port.
This makes it possible to remove the usage of sun4i_drv completely in
subsequent patches.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
sun4i_crtc controls the backend and tcon hardware blocks of the display
pipeline. Instead of doing so through the master drm structure, leave
pointers to the corresponding backend and tcon in itself.
Also drop the drm_device pointer, since it is no longer needed.
The next step forward would be to pass the pointers in through
sun4i_crtc_init as parameters. This would make it easier to support
multiple display pipelines layer on.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
To support multiple display pipelines, we would have multiple crtcs,
with one or more planes bound to them. Obviously having hardcoded
values for the drm_plane .possible_crtcs field is not going to work.
For primary and cursor planes, the value is set by
drm_crtc_init_with_planes. We just need to set it for overlay planes.
We also fix the value set for the RGB encoder, by referencing the
crtc set in sun4i_drv.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The current layer init code keeps a pointer to the primary plane layer
in sun4i_drv. When we eventually support multiple display pipelines,
this would force us to keep track of primary planes for all crtcs. And
these pointers only get used at bind time.
Instead, have the crtc init code iterate through the returned layers
to find the primary and cursor layers. And drop the pointer from the
sun4i_drv structure.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
This patch moves the sun4i_layers_init call from sun4i_drv_bind to
sun4i_crtc_init, and the layers pointer from struct sun4i_drv to
struct sun4i_crtc.
The layers are bound to a specific crtc, and they are not directly
used once initiated. They are used through their included drm_plane
structures.
Moving the layers into the crtc facilitates binding them to the crtc
explicitly, by setting the corresponding bit in their .possible_crtcs
fields right after the crtc is initialized. This is done in a later
patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The way drm_of_find_possible_crtcs works is it tries to match the
remote-endpoint of the given node's various endpoints to all the
crtc's .port field. Thus we need to set drm_crtc.port to the output
port node of the underlying TCON.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
sun4i_crtc_init can fail for a number of reasons. Instead of returning
a NULL pointer when it fails, pass back the encountered error using
ERR_PTR.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
The vblank hooks in struct drm_driver are deprecated and only meant for
legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks
in struct drm_crtc_funcs should be used instead.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-20-git-send-email-shawnguo@kernel.org
|
|
Linux 4.7
As requested by Daniel Vetter as the conflicts were getting messy.
|
|
So far, we were missing to send the vblank event when disabling the CRTC,
making us never report the last vblank event.
This was causing a time out on the page flip, which should be solved now.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
|
atomic_flush seems to be the right place, right after we commit the
plane updates. Again use the fullproof version, since the pipe might
be off.
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1465388359-8070-6-git-send-email-daniel.vetter@ffwll.ch
|
|
The Allwinner A10 and subsequent SoCs share the same display pipeline, with
variations in the number of controllers (1 or 2), or the presence or not of
some output (HDMI, TV, VGA) or not.
Add a driver with a limited set of features for now, and we will hopefully
support all of them eventually
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|