summaryrefslogtreecommitdiff
path: root/drivers/firmware
AgeCommit message (Collapse)AuthorFilesLines
2014-04-11Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "This is a collection of minor fixes for x86, plus the IRET information leak fix (forbid the use of 16-bit segments in 64-bit mode)" NOTE! We may have to relax the "forbid the use of 16-bit segments in 64-bit mode" part, since there may be people who still run and depend on 16-bit Windows binaries under Wine. But I'm taking this in the current unconditional form for now to see who (if anybody) screams bloody murder. Maybe nobody cares. And maybe we'll have to update it with some kind of runtime enablement (like our vm.mmap_min_addr tunable that people who run dosemu/qemu/wine already need to tweak). * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels efi: Pass correct file handle to efi_file_{read,close} x86/efi: Correct EFI boot stub use of code32_start x86/efi: Fix boot failure with EFI stub x86/platform/hyperv: Handle VMBUS driver being a module x86/apic: Reinstate error IRQ Pentium erratum 3AP workaround x86, CMCI: Add proper detection of end of CMCI storms
2014-04-11Merge tag 'efi-urgent' of ↵Ingo Molnar1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/urgent Pull EFI fixes from Matt Fleming: "* Fix EFI boot regression introduced during the merge window where the firmware was reading random values from the stack because we were passing a pointer to the wrong object type. * Kernel corruption has been reported when booting with the EFI boot stub which was tracked down to setting a bogus value for bp->hdr.code32_start, resulting in corruption during relocation. * Olivier Martin reported that the wrong file handles were being passed to efi_file_(read|close), which works for x86 by luck due to the way that the FAT driver is implemented, but doesn't work on ARM." Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-10efi: Pass correct file handle to efi_file_{read,close}Matt Fleming1-3/+3
We're currently passing the file handle for the root file system to efi_file_read() and efi_file_close(), instead of the file handle for the file we wish to read/close. While this has worked up until now, it seems that it has only been by pure luck. Olivier explains, "The issue is the UEFI Fat driver might return the same function for 'fh->read()' and 'h->read()'. While in our case it does not work with a different implementation of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. In our case, we return a different pointer when reading a directory and reading a file." Fixing this actually clears up the two functions because we can drop one of the arguments, and instead only pass a file 'handle' argument. Reported-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Olivier Martin <olivier.martin@arm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Cc: Leif Lindholm <leif.lindholm@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-04-01Merge tag 'driver-core-3.15-rc1' of ↵Linus Torvalds2-28/+26
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and sysfs updates from Greg KH: "Here's the big driver core / sysfs update for 3.15-rc1. Lots of kernfs updates to make it useful for other subsystems, and a few other tiny driver core patches. All have been in linux-next for a while" * tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (42 commits) Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()" kernfs: cache atomic_write_len in kernfs_open_file numa: fix NULL pointer access and memory leak in unregister_one_node() Revert "driver core: synchronize device shutdown" kernfs: fix off by one error. kernfs: remove duplicate dir.c at the top dir x86: align x86 arch with generic CPU modalias handling cpu: add generic support for CPU feature based module autoloading sysfs: create bin_attributes under the requested group driver core: unexport static function create_syslog_header firmware: use power efficient workqueue for unloading and aborting fw load firmware: give a protection when map page failed firmware: google memconsole driver fixes firmware: fix google/gsmi duplicate efivars_sysfs_init() drivers/base: delete non-required instances of include <linux/init.h> kernfs: fix kernfs_node_from_dentry() ACPI / platform: drop redundant ACPI_HANDLE check kernfs: fix hash calculation in kernfs_rename_ns() kernfs: add CONFIG_KERNFS sysfs, kobject: add sysfs wrapper for kernfs_enable_ns() ...
2014-03-31Merge branch 'x86-asmlinkage-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 LTO changes from Peter Anvin: "More infrastructure work in preparation for link-time optimization (LTO). Most of these changes is to make sure symbols accessed from assembly code are properly marked as visible so the linker doesn't remove them. My understanding is that the changes to support LTO are still not upstream in binutils, but are on the way there. This patchset should conclude the x86-specific changes, and remaining patches to actually enable LTO will be fed through the Kbuild tree (other than keeping up with changes to the x86 code base, of course), although not necessarily in this merge window" * 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits) Kbuild, lto: Handle basic LTO in modpost Kbuild, lto: Disable LTO for asm-offsets.c Kbuild, lto: Add a gcc-ld script to let run gcc as ld Kbuild, lto: add ld-version and ld-ifversion macros Kbuild, lto: Drop .number postfixes in modpost Kbuild, lto, workaround: Don't warn for initcall_reference in modpost lto: Disable LTO for sys_ni lto: Handle LTO common symbols in module loader lto, workaround: Add workaround for initcall reordering lto: Make asmlinkage __visible x86, lto: Disable LTO for the x86 VDSO initconst, x86: Fix initconst mistake in ts5500 code initconst: Fix initconst mistake in dcdbas asmlinkage: Make trace_hardirqs_on/off_caller visible asmlinkage, x86: Fix 32bit memcpy for LTO asmlinkage Make __stack_chk_failed and memcmp visible asmlinkage: Mark rwsem functions that can be called from assembler asmlinkage asmlinkage: Make main_extable_sort_needed visible asmlinkage, mutex: Mark __visible asmlinkage: Make trace_hardirq visible ...
2014-03-26x86, efi: Abstract x86 efi_early callsMatt Fleming1-22/+22
The ARM EFI boot stub doesn't need to care about the efi_early infrastructure that x86 requires in order to do mixed mode thunking. So wrap everything up in an efi_call_early() macro. This allows x86 to do the necessary indirection jumps to call whatever firmware interface is necessary (native or mixed mode), but also allows the ARM folks to mask the fact that they don't support relocation in the boot stub and need to pass 'sys_table_arg' to every function. [ hpa: there are no object code changes from this patch ] Signed-off-by: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/20140326091011.GB2958@console-pimps.org Cc: Roy Franz <roy.franz@linaro.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-03-05Merge remote-tracking branch 'tip/x86/efi-mixed' into efi-for-mingoMatt Fleming1-110/+38
Conflicts: arch/x86/kernel/setup.c arch/x86/platform/efi/efi.c arch/x86/platform/efi/efi_64.c
2014-03-04x86/efi: Build our own EFI services pointer tableMatt Fleming1-110/+38
It's not possible to dereference the EFI System table directly when booting a 64-bit kernel on a 32-bit EFI firmware because the size of pointers don't match. In preparation for supporting the above use case, build a list of function pointers on boot so that callers don't have to worry about converting pointer sizes through multiple levels of indirection. Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-03-04efi: Use NULL instead of 0 for pointerDaeseok Youn2-2/+2
Fix following sparse warnings: drivers/firmware/efi/efivars.c:230:66: warning: Using plain integer as NULL pointer drivers/firmware/efi/efi.c:236:27: warning: Using plain integer as NULL pointer Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-03-04efi: Set feature flags inside feature init functionsMatt Fleming1-0/+3
It makes more sense to set the feature flag in the success path of the detection function than it does to rely on the caller doing it. Apart from it being more logical to group the code and data together, it sets a much better example for new EFI architectures. Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-02-15firmware: google memconsole driver fixesMichel Lespinasse1-21/+26
The google memconsole driver is currently broken upstream, as it tries to read memory that is described as reserved in /proc/iomem, by dereferencing a pointer obtained through phys_to_virt(). This triggers a kernel fault as such regions are unmapped after early boot. The proper workaround is to use ioremap_cache() / iounmap() around such accesses. As some unrelated changes, I also converted some printks to use pr_info() and added some missing __init annotations. Tested: booted dbg build, verified I could read /sys/firmware/log Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-15firmware: fix google/gsmi duplicate efivars_sysfs_init()Michel Lespinasse1-7/+0
Starting in commit e14ab23dde12b80db4c94b684a2e485b72b16af3, efivars_sysfs_init() is called both by itself as an init function, and by drivers/firmware/google/gsmi.c gsmi_init(). This results in runtime warnings such as the following: [ 5.651330] WARNING: at fs/sysfs/dir.c:530 sysfs_add_one+0xbd/0xe0() [ 5.657699] sysfs: cannot create duplicate filename '/firmware/gsmi/vars' Fixing this by removing the redundant efivars_sysfs_init() call in gsmi_init(). Tested: booted, checked that /firmware/gsmi/vars was still present and showed the expected contents. Signed-off-by: Michel Lespinasse <walken@google.com> Acked-by: Matt Fleming <matt.fleming@intel.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-13initconst: Fix initconst mistake in dcdbasAndi Kleen1-1/+1
const must be __initconst. Cc: Douglas_Warzecha@dell.com Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1391845930-28580-13-git-send-email-ak@linux.intel.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-27firmware/google: drop 'select EFI' to avoid recursive dependencyArd Biesheuvel1-2/+1
The GOOGLE_SMI Kconfig symbol depends on DMI and selects EFI. This causes problems on other archs when introducing DMI support that depends on EFI, as it results in a recursive dependency: arch/arm/Kconfig:1845:error: recursive dependency detected! arch/arm/Kconfig:1845: symbol DMI depends on EFI Fix by changing the 'select EFI' to a 'depends on EFI'. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Rientjes <rientjes@google.com> Acked-by: Mike Waychison <mikew@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-24Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
2014-01-23firmware/dmi_scan: generalize for use by other archsArd Biesheuvel2-10/+13
This patch makes a couple of changes to the SMBIOS/DMI scanning code so it can be used on other archs (such as ARM and arm64): (a) wrap the calls to ioremap()/iounmap(), this allows the use of a flavor of ioremap() more suitable for random unaligned access; (b) allow the non-EFI fallback probe into hardcoded physical address 0xF0000 to be disabled. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Ingo Molnar <mingo@elte.hu> Cc "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-21drivers/firmware/memmap.c: use memblock apis for early memory allocationsSantosh Shilimkar1-1/+1
Switch to memblock interfaces for early memory allocator instead of bootmem allocator. No functional change in beahvior than what it is in current code from bootmem users points of view. Archs already converted to NO_BOOTMEM now directly use memblock interfaces instead of bootmem wrappers build on top of memblock. And the archs which still uses bootmem, these new apis just fallback to exiting bootmem APIs. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Paul Walmsley <paul@pwsan.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Russell King <linux@arm.linux.org.uk> Cc: Tejun Heo <tj@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-20Merge tag 'driver-core-3.14-rc1' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core / sysfs patches from Greg KH: "Here's the big driver core and sysfs patch set for 3.14-rc1. There's a lot of work here moving sysfs logic out into a "kernfs" to allow other subsystems to also have a virtual filesystem with the same attributes of sysfs (handle device disconnect, dynamic creation / removal as needed / unneeded, etc) This is primarily being done for the cgroups filesystem, but the goal is to also move debugfs to it when it is ready, solving all of the known issues in that filesystem as well. The code isn't completed yet, but all should be stable now (there is a big section that was reverted due to problems found when testing) There's also some other smaller fixes, and a driver core addition that allows for a "collection" of objects, that the DRM people will be using soon (it's in this tree to make merges after -rc1 easier) All of this has been in linux-next with no reported issues" * tag 'driver-core-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (113 commits) kernfs: associate a new kernfs_node with its parent on creation kernfs: add struct dentry declaration in kernfs.h kernfs: fix get_active failure handling in kernfs_seq_*() Revert "kernfs: fix get_active failure handling in kernfs_seq_*()" Revert "kernfs: replace kernfs_node->u.completion with kernfs_root->deactivate_waitq" Revert "kernfs: remove KERNFS_ACTIVE_REF and add kernfs_lockdep()" Revert "kernfs: remove KERNFS_REMOVED" Revert "kernfs: restructure removal path to fix possible premature return" Revert "kernfs: invoke kernfs_unmap_bin_file() directly from __kernfs_remove()" Revert "kernfs: remove kernfs_addrm_cxt" Revert "kernfs: make kernfs_get_active() block if the node is deactivated but not removed" Revert "kernfs: implement kernfs_{de|re}activate[_self]()" Revert "kernfs, sysfs, driver-core: implement kernfs_remove_self() and its wrappers" Revert "pci: use device_remove_file_self() instead of device_schedule_callback()" Revert "scsi: use device_remove_file_self() instead of device_schedule_callback()" Revert "s390: use device_remove_file_self() instead of device_schedule_callback()" Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()" Revert "kernfs: remove unnecessary NULL check in __kernfs_remove()" kernfs: remove unnecessary NULL check in __kernfs_remove() drivers/base: provide an infrastructure for componentised subsystems ...
2014-01-12Merge branch 'acpi-cleanup'Rafael J. Wysocki1-1/+1
* acpi-cleanup: (22 commits) ACPI / tables: Return proper error codes from acpi_table_parse() and fix comment. ACPI / tables: Check if id is NULL in acpi_table_parse() ACPI / proc: Include appropriate header file in proc.c ACPI / EC: Remove unused functions and add prototype declaration in internal.h ACPI / dock: Include appropriate header file in dock.c ACPI / PCI: Include appropriate header file in pci_link.c ACPI / PCI: Include appropriate header file in pci_slot.c ACPI / EC: Mark the function acpi_ec_add_debugfs() as static in ec_sys.c ACPI / NVS: Include appropriate header file in nvs.c ACPI / OSL: Mark the function acpi_table_checksum() as static ACPI / processor: initialize a variable to silence compiler warning ACPI / processor: use ACPI_COMPANION() to get ACPI device ACPI: correct minor typos ACPI / sleep: Drop redundant acpi_disabled check ACPI / dock: Drop redundant acpi_disabled check ACPI / table: Replace '1' with specific error return values ACPI: remove trailing whitespace ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware module ACPI / i915: Fix incorrect <acpi/acpi.h> inclusions via <linux/acpi_io.h> SFI / ACPI: Fix warnings reported during builds with W=1 ... Conflicts: drivers/acpi/nvs.c drivers/hwmon/asus_atk0110.c
2014-01-05Merge tag 'v3.13-rc7' into x86/efi-kexec to resolve conflictsIngo Molnar6-26/+171
Conflicts: arch/x86/platform/efi/efi.c drivers/firmware/efi/Kconfig Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-29Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "There is a small EFI fix and a big power regression fix in this batch. My queue also had a fix for downing a CPU when there are insufficient number of IRQ vectors available, but I'm holding that one for now due to recent bug reports" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/efi: Don't select EFI from certain special ACPI drivers x86 idle: Repair large-server 50-watt idle-power regression
2013-12-24Merge 3.13-rc5 into staging-nextGreg Kroah-Hartman1-0/+1
We want these fixes here to handle some merge issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-21efi: Export EFI runtime memory mapping to sysfsDave Young4-0/+197
kexec kernel will need exactly same mapping for EFI runtime memory ranges. Thus here export the runtime ranges mapping to sysfs, kexec-tools will assemble them and pass to 2nd kernel via setup_data. Introducing a new directory /sys/firmware/efi/runtime-map just like /sys/firmware/memmap. Containing below attribute in each file of that directory: attribute num_pages phys_addr type virt_addr Signed-off-by: Dave Young <dyoung@redhat.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-12-21efi: Export more EFI table variables to sysfsDave Young1-1/+40
Export fw_vendor, runtime and config table physical addresses to /sys/firmware/efi/{fw_vendor,runtime,config_table} because kexec kernels need them. From EFI spec these 3 variables will be updated to virtual address after entering virtual mode. But kernel startup code will need the physical address. Signed-off-by: Dave Young <dyoung@redhat.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-12-20pstore: Don't allow high traffic options on fragile devicesLuck, Tony1-0/+1
Some pstore backing devices use on board flash as persistent storage. These have limited numbers of write cycles so it is a poor idea to use them from high frequency operations. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-19x86/efi: Don't select EFI from certain special ACPI driversJan Beulich3-4/+5
Commit 7ea6c6c1 ("Move cper.c from drivers/acpi/apei to drivers/firmware/efi") results in CONFIG_EFI being enabled even when the user doesn't want this. Since ACPI APEI used to build fine without UEFI (and as far as I know also has no functional depency on it), at least in that case using a reverse dependency is wrong (and a straight one isn't needed). Whether the same is true for ACPI_EXTLOG I don't know - if there is a functional dependency, it should depend on EFI rather than selecting it. It certainly has (currently) no build dependency. Adjust Kconfig and build logic so that the bad dependency gets avoided. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Tony Luck <tony.luck@intel.com> Cc: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/52AF1EBC020000780010DBF9@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-12-10Merge branch 'driver-core-linus' into driver-core-nextTejun Heo3-22/+165
a8b14744429f ("sysfs: give different locking key to regular and bin files") in driver-core-linus modifies sysfs_open_file() so that it gives out different locking classes to sysfs_open_files depending on whether the file is bin or not. Due to the massive kernfs reorganization in driver-core-next, this naturally causes merge conflict in fs/sysfs/file.c. Due to the way things are split between kernfs and sysfs in driver-core-next, the same fix can't easily be applied to driver-core-next. This merge simply ignores the offending commit. A following patch will implement a separate fix for the issue. Signed-off-by: Tejun Heo <tj@kernel.org>
2013-12-08firmware: dmi-sysfs: Remove "dmi" directory on module exitBjorn Helgaas1-0/+1
With CONFIG_DEBUG_KOBJECT_RELEASE=y, removing and immediately reloading the dmi-sysfs module causes the following warning: sysfs: cannot create duplicate filename '/firmware/dmi' kobject_add_internal failed for dmi with -EEXIST, don't try to register things with the same name in the same directory. The "dmi" directory stays in sysfs until the dmi_kobj is released, and DEBUG_KOBJECT_RELEASE delays that. I don't think we can hit this problem in normal usage because dmi_kobj is static and nothing outside dmi-sysfs can get a reference to it, so the only way to delay the "dmi" release is with DEBUG_KOBJECT_RELEASE. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-08firmware: dmi-sysfs: Don't remove dmi-sysfs "raw" file explicitlyBjorn Helgaas1-1/+1
Removing the dmi-sysfs module causes the following warning: # modprobe -r dmi_sysfs WARNING: CPU: 11 PID: 6785 at fs/sysfs/inode.c:325 sysfs_hash_and_remove+0xa9/0xb0() sysfs: can not remove 'raw', no directory This is because putting the entry kobject, e.g., for "/sys/firmware/dmi/entries/19-0", removes the directory and all its contents. By the time dmi_sysfs_entry_release() runs, the "raw" file inside ".../19-0/" has already been removed. Therefore, we don't need to remove the "raw" bin file at all in dmi_sysfs_entry_release(). Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-07ACPI / IBFT: Fix incorrect <acpi/acpi.h> inclusion in iSCSI boot firmware moduleLv Zheng1-1/+1
To avoid build problems and breaking dependencies between ACPI header files, <acpi/acpi.h> should not be included directly by code outside of the ACPI core subsystem, but this is done by the ACPI iSCSI Boot Firmware code. The iBFT specification doesn't mention whether or not it can appear on a non-ACPI platform, but is says that ACPI 3.0b defines the mechanism. The current CONFIG_ISCSI_IBFT_FIND code doesn't use the ACPI tables API to locate the table, so it doesn't rely on CONFIG_ACPI directly. However, since iBFT is is an ACPI-based mechanism (please refer to the documentation link below for more information), it should be correct to make CONFIG_ISCSI_IBFT_FIND depend on CONFIG_ACPI (even though the table location can be implemented without using ACPI tables API). After that change, include/linux/iscsi_ibft.h can be modified to include <linux/acpi.h> instead of <acpi/acpi.h> as appropriate. References: http://www.microsoft.com/whdc/system/platform/firmware/ibft.mspx Cc: Konrad Rzeszutek Wilk <konrad@kernel.org> Cc: Peter Jones <pjones@redhat.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> [rjw: Subject and changelog] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-29efi-pstore: Make efi-pstore return a unique idMadper Xie1-6/+14
Pstore fs expects that backends provide a unique id which could avoid pstore making entries as duplication or denominating entries the same name. So I combine the timestamp, part and count into id. Signed-off-by: Madper Xie <cxie@redhat.com> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: stable@vger.kernel.org Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-28efivars, efi-pstore: Hold off deletion of sysfs entry until the scan is ↵Seiji Aguchi3-16/+151
completed Currently, when mounting pstore file system, a read callback of efi_pstore driver runs mutiple times as below. - In the first read callback, scan efivar_sysfs_list from head and pass a kmsg buffer of a entry to an upper pstore layer. - In the second read callback, rescan efivar_sysfs_list from the entry and pass another kmsg buffer to it. - Repeat the scan and pass until the end of efivar_sysfs_list. In this process, an entry is read across the multiple read function calls. To avoid race between the read and erasion, the whole process above is protected by a spinlock, holding in open() and releasing in close(). At the same time, kmemdup() is called to pass the buffer to pstore filesystem during it. And then, it causes a following lockdep warning. To make the dynamic memory allocation runnable without taking spinlock, holding off a deletion of sysfs entry if it happens while scanning it via efi_pstore, and deleting it after the scan is completed. To implement it, this patch introduces two flags, scanning and deleting, to efivar_entry. On the code basis, it seems that all the scanning and deleting logic is not needed because __efivars->lock are not dropped when reading from the EFI variable store. But, the scanning and deleting logic is still needed because an efi-pstore and a pstore filesystem works as follows. In case an entry(A) is found, the pointer is saved to psi->data. And efi_pstore_read() passes the entry(A) to a pstore filesystem by releasing __efivars->lock. And then, the pstore filesystem calls efi_pstore_read() again and the same entry(A), which is saved to psi->data, is used for resuming to scan a sysfs-list. So, to protect the entry(A), the logic is needed. [ 1.143710] ------------[ cut here ]------------ [ 1.144058] WARNING: CPU: 1 PID: 1 at kernel/lockdep.c:2740 lockdep_trace_alloc+0x104/0x110() [ 1.144058] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) [ 1.144058] Modules linked in: [ 1.144058] CPU: 1 PID: 1 Comm: systemd Not tainted 3.11.0-rc5 #2 [ 1.144058] 0000000000000009 ffff8800797e9ae0 ffffffff816614a5 ffff8800797e9b28 [ 1.144058] ffff8800797e9b18 ffffffff8105510d 0000000000000080 0000000000000046 [ 1.144058] 00000000000000d0 00000000000003af ffffffff81ccd0c0 ffff8800797e9b78 [ 1.144058] Call Trace: [ 1.144058] [<ffffffff816614a5>] dump_stack+0x54/0x74 [ 1.144058] [<ffffffff8105510d>] warn_slowpath_common+0x7d/0xa0 [ 1.144058] [<ffffffff8105517c>] warn_slowpath_fmt+0x4c/0x50 [ 1.144058] [<ffffffff8131290f>] ? vsscanf+0x57f/0x7b0 [ 1.144058] [<ffffffff810bbd74>] lockdep_trace_alloc+0x104/0x110 [ 1.144058] [<ffffffff81192da0>] __kmalloc_track_caller+0x50/0x280 [ 1.144058] [<ffffffff815147bb>] ? efi_pstore_read_func.part.1+0x12b/0x170 [ 1.144058] [<ffffffff8115b260>] kmemdup+0x20/0x50 [ 1.144058] [<ffffffff815147bb>] efi_pstore_read_func.part.1+0x12b/0x170 [ 1.144058] [<ffffffff81514800>] ? efi_pstore_read_func.part.1+0x170/0x170 [ 1.144058] [<ffffffff815148b4>] efi_pstore_read_func+0xb4/0xe0 [ 1.144058] [<ffffffff81512b7b>] __efivar_entry_iter+0xfb/0x120 [ 1.144058] [<ffffffff8151428f>] efi_pstore_read+0x3f/0x50 [ 1.144058] [<ffffffff8128d7ba>] pstore_get_records+0x9a/0x150 [ 1.158207] [<ffffffff812af25c>] ? selinux_d_instantiate+0x1c/0x20 [ 1.158207] [<ffffffff8128ce30>] ? parse_options+0x80/0x80 [ 1.158207] [<ffffffff8128ced5>] pstore_fill_super+0xa5/0xc0 [ 1.158207] [<ffffffff811ae7d2>] mount_single+0xa2/0xd0 [ 1.158207] [<ffffffff8128ccf8>] pstore_mount+0x18/0x20 [ 1.158207] [<ffffffff811ae8b9>] mount_fs+0x39/0x1b0 [ 1.158207] [<ffffffff81160550>] ? __alloc_percpu+0x10/0x20 [ 1.158207] [<ffffffff811c9493>] vfs_kern_mount+0x63/0xf0 [ 1.158207] [<ffffffff811cbb0e>] do_mount+0x23e/0xa20 [ 1.158207] [<ffffffff8115b51b>] ? strndup_user+0x4b/0xf0 [ 1.158207] [<ffffffff811cc373>] SyS_mount+0x83/0xc0 [ 1.158207] [<ffffffff81673cc2>] system_call_fastpath+0x16/0x1b [ 1.158207] ---[ end trace 61981bc62de9f6f4 ]--- Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Tested-by: Madper Xie <cxie@redhat.com> Cc: stable@kernel.org Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-11-14Merge branch 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2-18/+27
Pull DMA mask updates from Russell King: "This series cleans up the handling of DMA masks in a lot of drivers, fixing some bugs as we go. Some of the more serious errors include: - drivers which only set their coherent DMA mask if the attempt to set the streaming mask fails. - drivers which test for a NULL dma mask pointer, and then set the dma mask pointer to a location in their module .data section - which will cause problems if the module is reloaded. To counter these, I have introduced two helper functions: - dma_set_mask_and_coherent() takes care of setting both the streaming and coherent masks at the same time, with the correct error handling as specified by the API. - dma_coerce_mask_and_coherent() which resolves the problem of drivers forcefully setting DMA masks. This is more a marker for future work to further clean these locations up - the code which creates the devices really should be initialising these, but to fix that in one go along with this change could potentially be very disruptive. The last thing this series does is prise away some of Linux's addition to "DMA addresses are physical addresses and RAM always starts at zero". We have ARM LPAE systems where all system memory is above 4GB physical, hence having DMA masks interpreted by (eg) the block layers as describing physical addresses in the range 0..DMAMASK fails on these platforms. Santosh Shilimkar addresses this in this series; the patches were copied to the appropriate people multiple times but were ignored. Fixing this also gets rid of some ARM weirdness in the setup of the max*pfn variables, and brings ARM into line with every other Linux architecture as far as those go" * 'for-linus-dma-masks' of git://git.linaro.org/people/rmk/linux-arm: (52 commits) ARM: 7805/1: mm: change max*pfn to include the physical offset of memory ARM: 7797/1: mmc: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7796/1: scsi: Use dma_max_pfn(dev) helper for bounce_limit calculations ARM: 7795/1: mm: dma-mapping: Add dma_max_pfn(dev) helper function ARM: 7794/1: block: Rename parameter dma_mask to max_addr for blk_queue_bounce_limit() ARM: DMA-API: better handing of DMA masks for coherent allocations ARM: 7857/1: dma: imx-sdma: setup dma mask DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masks DMA-API: dcdbas: update DMA mask handing DMA-API: dma: edma.c: no need to explicitly initialize DMA masks DMA-API: usb: musb: use platform_device_register_full() to avoid directly messing with dma masks DMA-API: crypto: remove last references to 'static struct device *dev' DMA-API: crypto: fix ixp4xx crypto platform device support DMA-API: others: use dma_set_coherent_mask() DMA-API: staging: use dma_set_coherent_mask() DMA-API: usb: use new dma_coerce_mask_and_coherent() DMA-API: usb: use dma_set_coherent_mask() DMA-API: parport: parport_pc.c: use dma_coerce_mask_and_coherent() DMA-API: net: octeon: use dma_coerce_mask_and_coherent() DMA-API: net: nxp/lpc_eth: use dma_coerce_mask_and_coherent() ...
2013-11-12Merge branch 'x86-mce-for-linus' of ↵Linus Torvalds4-0/+475
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS changes from Ingo Molnar: "The biggest change adds support for Intel 'CPER' (UEFI Common Platform Error Record) error logging, which builds upon an enhanced error logging mechanism available on Xeon processors. Full description is here: http://www.intel.com/content/www/us/en/architecture-and-technology/enhanced-mca-logging-xeon-paper.html This change provides a module (and support code) to check for an extended error log and prints extra details about the error on the console" * 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: ACPI, x86: Fix extended error log driver to depend on CONFIG_X86_LOCAL_APIC dmi: Avoid unaligned memory access in save_mem_devices() Move cper.c from drivers/acpi/apei to drivers/firmware/efi EDAC, GHES: Update ghes error record info ACPI, APEI, CPER: Cleanup CPER memory error output format ACPI, APEI, CPER: Enhance memory reporting capability ACPI, APEI, CPER: Add UEFI 2.4 support for memory error DMI: Parse memory device (type 17) in SMBIOS ACPI, x86: Extended error log driver for x86 platform bitops: Introduce a more generic BITMASK macro ACPI, CPER: Update cper info ACPI, APEI, CPER: Fix status check during error printing
2013-11-12Merge branch 'x86-efi-for-linus' of ↵Linus Torvalds3-1/+777
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 EFI changes from Ingo Molnar: "Main changes: - Add support for earlyprintk=efi which uses the EFI framebuffer. Very useful for debugging boot problems. - EFI stub support for large memory maps (more than 128 entries) - EFI ARM support - this was mostly done by generalizing x86 <-> ARM platform differences, such as by moving x86 EFI code into drivers/firmware/efi/ and sharing it with ARM. - Documentation updates - misc fixes" * 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (26 commits) x86/efi: Add EFI framebuffer earlyprintk support boot, efi: Remove redundant memset() x86/efi: Fix config_table_type array termination x86 efi: bugfix interrupt disabling sequence x86: EFI stub support for large memory maps efi: resolve warnings found on ARM compile efi: Fix types in EFI calls to match EFI function definitions. efi: Renames in handle_cmdline_files() to complete generalization. efi: Generalize handle_ramdisks() and rename to handle_cmdline_files(). efi: Allow efi_free() to be called with size of 0 efi: use efi_get_memory_map() to get final map for x86 efi: generalize efi_get_memory_map() efi: Rename __get_map() to efi_get_memory_map() efi: Move unicode to ASCII conversion to shared function. efi: Generalize relocate_kernel() for use by other architectures. efi: Move relocate_kernel() to shared file. efi: Enforce minimum alignment of 1 page on allocations. efi: Rename memory allocation/free functions efi: Add system table pointer argument to shared functions. efi: Move common EFI stub code from x86 arch code to common location ...
2013-11-03dmi: Avoid unaligned memory access in save_mem_devices()Luck, Tony1-1/+2
Firmware is not required to maintain alignment of SMBIOS entries, so we should take care accessing fields within these structures. Use "get_unaligned()" to avoid problems. [ Found on ia64 (which grumbles about unaligned access) ] Signed-off-by: Tony Luck <tony.luck@intel.com> Cc: Chen Gong <gong.chen@linux.intel.com> Link: http://lkml.kernel.org/r/27d82dbff5be1025bf18ab88498632d36c2fcf3c.1383331440.git.tony.luck@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-31Move cper.c from drivers/acpi/apei to drivers/firmware/efiLuck, Tony3-0/+414
cper.c contains code to decode and print "Common Platform Error Records". Originally added under drivers/acpi/apei because the only user was in that same directory - but now we have another consumer, and we shouldn't have to force CONFIG_ACPI_APEI get access to this code. Since CPER is defined in the UEFI specification - the logical home for this code is under drivers/firmware/efi/ Acked-by: Matt Fleming <matt.fleming@intel.com> Acked-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-31DMA-API: firmware/google/gsmi.c: avoid direct access to DMA masksRussell King1-5/+8
This driver doesn't need to directly access DMA masks if it uses the platform_device_register_full() API rather than platform_device_register_simple() - the former function can initialize the DMA mask appropriately. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-31DMA-API: dcdbas: update DMA mask handingRussell King1-13/+19
dcdbas was explicitly initializing DMA masks thusly: dcdbas_pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); dcdbas_pdev->dev.dma_mask = &dcdbas_pdev->dev.coherent_dma_mask; which bypasses the architecture check. Moreover, it is creating the dcdbas_pdev device itself, and using the platform_device_register_full() avoids some of this explicit initialization. Convert the driver to use platform_device_register_full(), and as it makes use of coherent DMA, also call dma_set_coherent_mask() to ensure that the architecture gets to check the mask. Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-23DMI: Parse memory device (type 17) in SMBIOSChen, Gong1-0/+60
This patch adds a new interface to decode memory device (type 17) to help error reporting on DIMMs. Original-author: Tony Luck <tony.luck@intel.com> Signed-off-by: Chen, Gong <gong.chen@linux.intel.com> Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Borislav Petkov <bp@suse.de> Reviewed-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-10-04boot, efi: Remove redundant memset()Roy Franz1-2/+0
Remove a redundant memset() call from efi_relocate_kernel() that was clearing memory that would be used by BSS in non-compressed images loaded with this function. This clear was redundant with the clearing done in the image itself, and also implemented incorrectly with a 0 length. Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Mark Salter <msalter@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-09-25Merge branch 'arm/common' into nextMatt Fleming1-0/+638
2013-09-25efi: resolve warnings found on ARM compileRoy Franz1-3/+1
warnings from gcc: warning: label 'free_pool' defined but not used [-Wunused-label] warning: value computed is not used [-Wunused-value] Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-09-25efi: Fix types in EFI calls to match EFI function definitions.Roy Franz1-6/+9
EFI calls can made directly on ARM, so the function pointers are directly invoked. This allows types to be checked at compile time, so here we ensure that the parameters match the function signature. The wrappers used by x86 prevent any type checking. Correct the type of chunksize to be based on native width as specified by the EFI_FILE_PROTOCOL read() function. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-09-25efi: Renames in handle_cmdline_files() to complete generalization.Roy Franz1-46/+46
Rename variables to be not initrd specific, as now the function loads arbitrary files. This change is exclusively renames and comment changes to reflect the generalization. Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Mark Salter <msalter@redhat.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-09-25efi: Generalize handle_ramdisks() and rename to handle_cmdline_files().Roy Franz1-21/+30
The handle_cmdline_files now takes the option to handle as a string, and returns the loaded data through parameters, rather than taking an x86 specific setup_header structure. For ARM, this will be used to load a device tree blob in addition to initrd images. Signed-off-by: Roy Franz <roy.franz@linaro.org> Acked-by: Mark Salter <msalter@redhat.com> Reviewed-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-09-25efi: Allow efi_free() to be called with size of 0Roy Franz1-0/+3
Make efi_free() safely callable with size of 0, similar to free() being callable with NULL pointers, and do nothing in that case. Remove size checks that this makes redundant. This also avoids some size checks in the ARM EFI stub code that will be added as well. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-09-25efi: generalize efi_get_memory_map()Roy Franz1-3/+11
Add arguments for returning the descriptor version and also the memory map key. The key is required for calling exit_boot_services(). Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-09-25efi: Rename __get_map() to efi_get_memory_map()Roy Franz1-6/+6
Rename function in preparation for making it more flexible and sharing it. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-09-25efi: Move unicode to ASCII conversion to shared function.Roy Franz1-0/+61
Move the open-coded conversion to a shared function for use by all architectures. Change the allocation to prefer a high address for ARM, as this is required to avoid conflicts with reserved regions in low memory. We don't know the specifics of these regions until after we process the command line and device tree. Signed-off-by: Roy Franz <roy.franz@linaro.org> Signed-off-by: Matt Fleming <matt.fleming@intel.com>