Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"No common topic whatsoever in those, sorry"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs: define inode flags using bit numbers
iov_iter: Move unnecessary inclusion of crypto/hash.h
dlmfs: clean up dlmfs_file_{read,write}() a bit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Fix pci_cfg_wait queue locking problem (Bjorn Helgaas)
- Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi
Saheed)
- Align PCIe capability and PCI accessor return values (Bolarinwa
Olayemi Saheed)
- Fix pci_create_slot() reference count leak (Qiushi Wu)
- Announce device after early fixups (Tiezhu Yang)
PCI device hotplug:
- Make rpadlpar functions static (Wei Yongjun)
Driver binding:
- Add device even if driver attach failed (Rajat Jain)
Virtualization:
- xen: Remove redundant initialization of irq (Colin Ian King)
IOMMU:
- Add pci_pri_supported() to check device or associated PF (Ashok Raj)
- Release IVRS table in AMD ACS quirk (Hanjun Guo)
- Mark AMD Navi10 GPU rev 0x00 ATS as broken (Kai-Heng Feng)
- Treat "external-facing" devices themselves as internal (Rajat Jain)
MSI:
- Forward MSI-X error code in pci_alloc_irq_vectors_affinity() (Piotr
Stankiewicz)
Error handling:
- Clear PCIe Device Status errors only if OS owns AER (Jonathan
Cameron)
- Log correctable errors as warning, not error (Matt Jolly)
- Use 'pci_channel_state_t' instead of 'enum pci_channel_state' (Luc
Van Oostenryck)
Peer-to-peer DMA:
- Allow P2PDMA on AMD Zen and newer CPUs (Logan Gunthorpe)
ASPM:
- Add missing newline in sysfs 'policy' (Xiongfeng Wang)
Native PCIe controllers:
- Convert to devm_platform_ioremap_resource_byname() (Dejin Zheng)
- Convert to devm_platform_ioremap_resource() (Dejin Zheng)
- Remove duplicate error message from devm_pci_remap_cfg_resource()
callers (Dejin Zheng)
- Fix runtime PM imbalance on error (Dinghao Liu)
- Remove dev_err() when handing an error from platform_get_irq()
(Krzysztof Wilczyński)
- Use pci_host_bridge.windows list directly instead of splicing in a
temporary list for cadence, mvebu, host-common (Rob Herring)
- Use pci_host_probe() instead of open-coding all the pieces for
altera, brcmstb, iproc, mobiveil, rcar, rockchip, tegra, v3,
versatile, xgene, xilinx, xilinx-nwl (Rob Herring)
- Default host bridge parent device to the platform device (Rob
Herring)
- Use pci_is_root_bus() instead of tracking root bus number
separately in aardvark, designware (imx6, keystone,
designware-host), mobiveil, xilinx-nwl, xilinx, rockchip, rcar (Rob
Herring)
- Set host bridge bus number in pci_scan_root_bus_bridge() instead of
each driver for aardvark, designware-host, host-common, mediatek,
rcar, tegra, v3-semi (Rob Herring)
- Move DT resource setup into devm_pci_alloc_host_bridge() (Rob
Herring)
- Set bridge map_irq and swizzle_irq to default functions; drivers
that don't support legacy IRQs (iproc) need to undo this (Rob
Herring)
ARM Versatile PCIe controller driver:
- Drop flag PCI_ENABLE_PROC_DOMAINS (Rob Herring)
Cadence PCIe controller driver:
- Use "dma-ranges" instead of "cdns,no-bar-match-nbits" property
(Kishon Vijay Abraham I)
- Remove "mem" from reg binding (Kishon Vijay Abraham I)
- Fix cdns_pcie_{host|ep}_setup() error path (Kishon Vijay Abraham I)
- Convert all r/w accessors to perform only 32-bit accesses (Kishon
Vijay Abraham I)
- Add support to start link and verify link status (Kishon Vijay
Abraham I)
- Allow pci_host_bridge to have custom pci_ops (Kishon Vijay Abraham I)
- Add new *ops* for CPU addr fixup (Kishon Vijay Abraham I)
- Fix updating Vendor ID and Subsystem Vendor ID register (Kishon
Vijay Abraham I)
- Use bridge resources for outbound window setup (Rob Herring)
- Remove private bus number and range storage (Rob Herring)
Cadence PCIe endpoint driver:
- Add MSI-X support (Alan Douglas)
HiSilicon PCIe controller driver:
- Remove non-ECAM HiSilicon hip05/hip06 driver (Rob Herring)
Intel VMD host bridge driver:
- Use Shadow MEMBAR registers for QEMU/KVM guests (Jon Derrick)
Loongson PCIe controller driver:
- Use DECLARE_PCI_FIXUP_EARLY for bridge_class_quirk() (Tiezhu Yang)
Marvell Aardvark PCIe controller driver:
- Indicate error in 'val' when config read fails (Pali Rohár)
- Don't touch PCIe registers if no card connected (Pali Rohár)
Marvell MVEBU PCIe controller driver:
- Setup BAR0 in order to fix MSI (Shmuel Hazan)
Microsoft Hyper-V host bridge driver:
- Fix a timing issue which causes kdump to fail occasionally (Wei Hu)
- Make some functions static (Wei Yongjun)
NVIDIA Tegra PCIe controller driver:
- Revert tegra124 raw_violation_fixup (Nicolas Chauvet)
- Remove PLL power supplies (Thierry Reding)
Qualcomm PCIe controller driver:
- Change duplicate PCI reset to phy reset (Abhishek Sahu)
- Add missing ipq806x clocks in PCIe driver (Ansuel Smith)
- Add missing reset for ipq806x (Ansuel Smith)
- Add ext reset (Ansuel Smith)
- Use bulk clk API and assert on error (Ansuel Smith)
- Add support for tx term offset for rev 2.1.0 (Ansuel Smith)
- Define some PARF params needed for ipq8064 SoC (Ansuel Smith)
- Add ipq8064 rev2 variant (Ansuel Smith)
- Support PCI speed set for ipq806x (Sham Muthayyan)
Renesas R-Car PCIe controller driver:
- Use devm_pci_alloc_host_bridge() (Rob Herring)
- Use struct pci_host_bridge.windows list directly (Rob Herring)
- Convert rcar-gen2 to use modern host bridge probe functions (Rob
Herring)
TI J721E PCIe driver:
- Add TI J721E PCIe host and endpoint driver (Kishon Vijay Abraham I)
Xilinx Versal CPM PCIe controller driver:
- Add Versal CPM Root Port driver and YAML schema (Bharat Kumar
Gogada)
MicroSemi Switchtec management driver:
- Add missing __iomem and __user tags to fix sparse warnings (Logan
Gunthorpe)
Miscellaneous:
- Replace http:// links with https:// (Alexander A. Klimov)
- Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn
Helgaas)
- Remove unused pci_lost_interrupt() (Heiner Kallweit)
- Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen)
- Fix kerneldoc warnings (Krzysztof Kozlowski)"
* tag 'pci-v5.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (113 commits)
PCI: Fix kerneldoc warnings
PCI: xilinx-cpm: Add Versal CPM Root Port driver
PCI: xilinx-cpm: Add YAML schemas for Versal CPM Root Port
PCI: Set bridge map_irq and swizzle_irq to default functions
PCI: Move DT resource setup into devm_pci_alloc_host_bridge()
PCI: rcar-gen2: Convert to use modern host bridge probe functions
PCI: Remove dev_err() when handing an error from platform_get_irq()
MAINTAINERS: Add Kishon Vijay Abraham I for TI J721E SoC PCIe
misc: pci_endpoint_test: Add J721E in pci_device_id table
PCI: j721e: Add TI J721E PCIe driver
PCI: switchtec: Add missing __iomem tag to fix sparse warnings
PCI: switchtec: Add missing __iomem and __user tags to fix sparse warnings
PCI: rpadlpar: Make functions static
PCI/P2PDMA: Allow P2PDMA on AMD Zen and newer CPUs
PCI: Release IVRS table in AMD ACS quirk
PCI: Announce device after early fixups
PCI: Mark AMD Navi10 GPU rev 0x00 ATS as broken
PCI: Remove unused pci_lost_interrupt()
dt-bindings: PCI: Add EP mode dt-bindings for TI's J721E SoC
dt-bindings: PCI: Add host mode dt-bindings for TI's J721E SoC
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"Core:
- Support out of order dma completion
- Support for repeating transaction
New controllers:
- Support for Actions S700 DMA engine
- Renesas R8A774E1, r8a7742 controller binding
- New driver for Xilinx DPDMA controller
Other:
- Support of out of order dma completion in idxd driver
- W=1 warning cleanup of subsystem
- Updates to ti-k3-dma, dw, idxd drivers"
* tag 'dmaengine-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (68 commits)
dmaengine: dw: Don't include unneeded header to platform data header
dmaengine: Actions: Add support for S700 DMA engine
dmaengine: Actions: get rid of bit fields from dma descriptor
dt-bindings: dmaengine: convert Actions Semi Owl SoCs bindings to yaml
dmaengine: idxd: add missing invalid flags field to completion
dmaengine: dw: Initialize max_sg_burst capability
dmaengine: dw: Introduce max burst length hw config
dmaengine: dw: Initialize min and max burst DMA device capability
dmaengine: dw: Set DMA device max segment size parameter
dmaengine: dw: Take HC_LLP flag into account for noLLP auto-config
dmaengine: Introduce DMA-device device_caps callback
dmaengine: Introduce max SG burst capability
dmaengine: Introduce min burst length capability
dt-bindings: dma: dw: Add max burst transaction length property
dt-bindings: dma: dw: Convert DW DMAC to DT binding
dmaengine: ti: k3-udma: Query throughput level information from hardware
dmaengine: ti: k3-udma: Use defines for capabilities register parsing
dmaengine: xilinx: dpdma: Fix kerneldoc warning
dmaengine: xilinx: dpdma: add missing kernel doc
dmaengine: xilinx: dpdma: remove comparison of unsigned expression
...
|
|
Conflicts:
Documentation/driver-api/dmaengine/provider.rst
include/linux/dmaengine.h
|
|
Pull drm updates from Dave Airlie:
"New xilinx displayport driver, AMD support for two new GPUs (more
header files), i915 initial support for RocketLake and some work on
their DG1 (discrete chip).
The core also grew some lockdep annotations to try and constrain what
drivers do with dma-fences, and added some documentation on why the
idea of indefinite fences doesn't work.
The long list is below.
I do have some fixes trees outstanding, but I'll follow up with those
later.
core:
- add user def flag to cmd line modes
- dma_fence_wait added might_sleep
- dma-fence lockdep annotations
- indefinite fences are bad documentation
- gem CMA functions used in more drivers
- struct mutex removal
- more drm_ debug macro usage
- set/drop master api fixes
- fix for drm/mm hole size comparison
- drm/mm remove invalid entry optimization
- optimise drm/mm hole handling
- VRR debugfs added
- uncompressed AFBC modifier support
- multiple display id blocks in EDID
- multiple driver sg handling fixes
- __drm_atomic_helper_crtc_reset in all drivers
- managed vram helpers
ttm:
- ttm_mem_reg handling cleanup
- remove bo offset field
- drop CMA memtype flag
- drop mappable flag
xilinx:
- New Xilinx ZynqMP DisplayPort Subsystem driver
nouveau:
- add CRC support
- start using NVIDIA published class header files
- convert all push buffer emission to new macros
- Proper push buffer space management for EVO/NVD channels.
- firmware loading fixes
- 2MiB system memory pages support on Pascal and newer
vkms:
- larger cursor support
i915:
- Rocketlake platform enablement
- Early DG1 enablement
- Numerous GEM refactorings
- DP MST fixes
- FBC, PSR, Cursor, Color, Gamma fixes
- TGL, RKL, EHL workaround updates
- TGL 8K display support fixes
- SDVO/HDMI/DVI fixes
amdgpu:
- Initial support for Sienna Cichlid GPU
- Initial support for Navy Flounder GPU
- SI UVD/VCE support
- expose rotation property
- Add support for unique id on Arcturus
- Enable runtime PM on vega10 boards that support BACO
- Skip BAR resizing if the bios already did id
- Major swSMU code cleanup
- Fixes for DCN bandwidth calculations
amdkfd:
- Track SDMA usage per process
- SMI events interface
radeon:
- Default to on chip GART for AGP boards on all arches
- Runtime PM reference count fixes
msm:
- headers regenerated causing churn
- a650/a640 display and GPU enablement
- dpu dither support for 6bpc panels
- dpu cursor fix
- dsi/mdp5 enablement for sdm630/sdm636/sdm66
tegra:
- video capture prep support
- reflection support
mediatek:
- convert mtk_dsi to bridge API
meson:
- FBC support
sun4i:
- iommu support
rockchip:
- register locking fix
- per-pixel alpha support PX30 VOP
mgag200:
- ported to simple and shmem helpers
- device init cleanups
- use managed pci functions
- dropped hw cursor support
ast:
- use managed pci functions
- use managed VRAM helpers
- rework cursor support
malidp:
- dev_groups support
hibmc:
- refactor hibmc_drv_vdac:
vc4:
- create TXP CRTC
imx:
- error path fixes and cleanups
etnaviv:
- clock handling and error handling cleanups
- use pin_user_pages"
* tag 'drm-next-2020-08-06' of git://anongit.freedesktop.org/drm/drm: (1747 commits)
drm/msm: use kthread_create_worker instead of kthread_run
drm/msm/mdp5: Add MDP5 configuration for SDM636/660
drm/msm/dsi: Add DSI configuration for SDM660
drm/msm/mdp5: Add MDP5 configuration for SDM630
drm/msm/dsi: Add phy configuration for SDM630/636/660
drm/msm/a6xx: add A640/A650 hwcg
drm/msm/a6xx: hwcg tables in gpulist
drm/msm/dpu: add SM8250 to hw catalog
drm/msm/dpu: add SM8150 to hw catalog
drm/msm/dpu: intf timing path for displayport
drm/msm/dpu: set missing flush bits for INTF_2 and INTF_3
drm/msm/dpu: don't use INTF_INPUT_CTRL feature on sdm845
drm/msm/dpu: move some sspp caps to dpu_caps
drm/msm/dpu: update UBWC config for sm8150 and sm8250
drm/msm/dpu: use right setup_blend_config for sm8150 and sm8250
drm/msm/a6xx: set ubwc config for A640 and A650
drm/msm/adreno: un-open-code some packets
drm/msm: sync generated headers
drm/msm/a6xx: add build_bw_table for A640/A650
drm/msm/a6xx: fix crashstate capture for A650
...
|
|
- Convert PCIe capability PCIBIOS errors to errno (Bolarinwa Olayemi
Saheed)
- Align PCIe capability and PCI accessor return values (Bolarinwa Olayemi
Saheed)
- Replace http:// links with https:// (Alexander A. Klimov)
- Replace lkml.org, spinics, gmane with lore.kernel.org (Bjorn Helgaas)
- Update panic message to mention kzalloc(), not kmalloc() (Liao Pingfang)
- Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h (Huacai Chen)
- Remove unused pci_lost_interrupt() (Heiner Kallweit)
* pci/misc:
PCI: Remove unused pci_lost_interrupt()
PCI: Move PCI_VENDOR_ID_REDHAT definition to pci_ids.h
PCI: Fix error in panic message
PCI: Replace lkml.org, spinics, gmane with lore.kernel.org
PCI: Replace http:// links with https://
PCI: Align PCIe capability and PCI accessor return values
PCI: Convert PCIe capability PCIBIOS errors to errno
|
|
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Conflicts:
drivers/dma/idxd/sysfs.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"A couple of subsystems have their own subsystem maintainers but choose
to have the code merged through the soc tree as upstream, as the code
tends to be used across multiple SoCs or has SoC specific drivers
itself:
- memory controllers:
Krzysztof Kozlowski takes ownership of the drivers/memory subsystem
and its drivers, starting out with a set of cleanup patches.
A larger driver for the Tegra memory controller that was
accidentally missed for v5.8 is now added.
- reset controllers:
Only minor updates to drivers/reset this time
- firmware:
The "turris mox" firmware driver gains support for signed firmware
blobs The tegra firmware driver gets extended to export some debug
information Various updates to i.MX firmware drivers, mostly
cosmetic
- ARM SCMI/SCPI:
A new mechanism for platform notifications is added, among a number
of minor changes.
- optee:
Probing of the TEE bus is rewritten to better support detection of
devices that depend on the tee-supplicant user space. A new
firmware based trusted platform module (fTPM) driver is added based
on OP-TEE
- SoC attributes:
A new driver is added to provide a generic soc_device for
identifying a machine through the SMCCC ARCH_SOC_ID firmware
interface rather than by probing SoC family specific registers.
The series also contains some cleanups to the common soc_device
code.
There are also a number of updates to SoC specific drivers, the main
ones are:
- Mediatek cmdq driver gains a few in-kernel interfaces
- Minor updates to Qualcomm RPMh, socinfo, rpm drivers, mostly adding
support for additional SoC variants
- The Qualcomm GENI core code gains interconnect path voting and
performance level support, and integrating this into a number of
device drivers.
- A new driver for Samsung Exynos5800 voltage coupler for
- Renesas RZ/G2H (R8A774E1) SoC support gets added to a couple of SoC
specific device drivers
- Updates to the TI K3 Ring Accelerator driver"
* tag 'arm-drivers-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (164 commits)
soc: qcom: geni: Fix unused label warning
soc: qcom: smd-rpm: Fix kerneldoc
memory: jz4780_nemc: Only request IO memory the driver will use
soc: qcom: pdr: Reorder the PD state indication ack
MAINTAINERS: Add Git repository for memory controller drivers
memory: brcmstb_dpfe: Fix language typo
memory: samsung: exynos5422-dmc: Correct white space issues
memory: samsung: exynos-srom: Correct alignment
memory: pl172: Enclose macro argument usage in parenthesis
memory: of: Correct kerneldoc
memory: omap-gpmc: Fix language typo
memory: omap-gpmc: Correct white space issues
memory: omap-gpmc: Use 'unsigned int' for consistency
memory: omap-gpmc: Enclose macro argument usage in parenthesis
memory: omap-gpmc: Correct kerneldoc
memory: mvebu-devbus: Align with open parenthesis
memory: mvebu-devbus: Add missing braces to all arms of if statement
memory: bt1-l2-ctl: Add blank lines after declarations
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/drivers
SOC: TI Keystone driver update for v5.9
- TI K3 Ring Accelerator updates
- Few non critical warining fixes
* tag 'drivers_soc_for_5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static
firmware: ti_sci: Replace HTTP links with HTTPS ones
soc: ti/ti_sci_protocol.h: drop a duplicated word + clarify
soc: ti: k3: fix semicolon.cocci warnings
soc: ti: k3-ringacc: fix: warn: variable dereferenced before check 'ring'
dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair
soc: ti: k3-ringacc: separate soc specific initialization
soc: ti: k3-ringacc: add request pair of rings api.
soc: ti: k3-ringacc: add ring's flags to dump
soc: ti: k3-ringacc: Move state tracking variables under a struct
dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema
Link: https://lore.kernel.org/r/1595711814-7015-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
DMA controller present on S700 SoC is compatible with the one on S900
(as most of registers are same), but it has different DMA descriptor
structure where registers "fcnt" and "ctrlb" uses different encoding.
For instance, on S900 "fcnt" starts at offset 0x0c and uses upper 12
bits whereas on S700, it starts at offset 0x1c and uses lower 12 bits.
This commit adds support for DMA controller present on S700.
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Link: https://lore.kernel.org/r/1595180527-11320-4-git-send-email-amittomer25@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
At the moment, Driver uses bit fields to describe registers of the DMA
descriptor structure that makes it less portable and maintainable, and
Andre suugested(and even sketched important bits for it) to make use of
array to describe this DMA descriptors instead. It gives the flexibility
while extending support for other platform such as Actions S700.
This commit removes the "owl_dma_lli_hw" (that includes bit-fields) and
uses array to describe DMA descriptor.
Suggested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1595180527-11320-3-git-send-email-amittomer25@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Multi-block support provides a way to map the kernel-specific SG-table so
the DW DMA device would handle it as a whole instead of handling the
SG-list items or so called LLP block items one by one. So if true LLP
list isn't supported by the DW DMA engine, then soft-LLP mode will be
utilized to load and execute each LLP-block one by one. The soft-LLP mode
of the DMA transactions execution might not work well for some DMA
consumers like SPI due to its Tx and Rx buffers inter-dependency. Let's
initialize the max_sg_burst DMA channels capability based on the nollp
flag state. If it's true, no hardware accelerated LLP is available and
max_sg_burst should be set with 1, which means that the DMA engine
can handle only a single SG list entry at a time. If noLLP is set to
false, then hardware accelerated LLP is supported and the DMA engine
can handle infinite number of SG entries in a single DMA transaction.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-11-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
IP core of the DW DMA controller may be synthesized with different
max burst length of the transfers per each channel. According to Synopsis
having the fixed maximum burst transactions length may provide some
performance gain. At the same time setting up the source and destination
multi size exceeding the max burst length limitation may cause a serious
problems. In our case the DMA transaction just hangs up. In order to fix
this lets introduce the max burst length platform config of the DW DMA
controller device and don't let the DMA channels configuration code
exceed the burst length hardware limitation.
Note the maximum burst length parameter can be detected either in runtime
from the DWC parameter registers or from the dedicated DT property.
Depending on the IP core configuration the maximum value can vary from
channel to channel so by overriding the channel slave max_burst capability
we make sure a DMA consumer will get the channel-specific max burst
length.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-10-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
According to the DW APB DMAC data book the minimum burst transaction
length is 1 and it's true for any version of the controller since
isn't parametrised in the coreAssembler so can't be changed at the
IP-core synthesis stage. The maximum burst transaction can vary from
channel to channel and from controller to controller depending on a
IP-core parameter the system engineer activated during the IP-core
synthesis. Let's initialise both min_burst and max_burst members of the
DMA controller descriptor with extreme values so the DMA clients could
use them to properly optimize the DMA requests. The channels and
controller-specific max_burst length initialization will be introduced
by the follow-up patches.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-9-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Maximum block size DW DMAC configuration corresponds to the max segment
size DMA parameter in the DMA core subsystem notation. Lets set it with a
value specific to the probed DW DMA controller. It shall help the DMA
clients to create size-optimized SG-list items for the controller. This in
turn will cause less dw_desc allocations, less LLP reinitializations,
better DMA device performance.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-8-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Full multi-block transfers functionality is enabled in DW DMA
controller only if CHx_MULTI_BLK_EN is set. But LLP-based transfers
can be executed only if hardcode channel x LLP register feature isn't
enabled, which can be switched on at the IP core synthesis for
optimization. If it's enabled then the LLP register is hardcoded to
zero, so the blocks chaining based on the LLPs is unsupported.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-7-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
There are DMA devices (like ours version of Synopsys DW DMAC) which have
DMA capabilities non-uniformly redistributed between the device channels.
In order to provide a way of exposing the channel-specific parameters to
the DMA engine consumers, we introduce a new DMA-device callback. In case
if provided it gets called from the dma_get_slave_caps() method and is
able to override the generic DMA-device capabilities.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-6-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some devices may lack the support of the hardware accelerated SG list
entries automatic walking through and execution. In this case a burden of
the SG list traversal and DMA engine re-initialization lies on the
DMA engine driver (normally implemented by using a DMA transfer completion
IRQ to recharge the DMA device with a next SG list entry). But such
solution may not be suitable for some DMA consumers. In particular SPI
devices need both Tx and Rx DMA channels work synchronously in order
to avoid the Rx FIFO overflow. In case if Rx DMA channel is paused for
some time while the Tx DMA channel works implicitly pulling data into the
Rx FIFO, the later will be eventually overflown, which will cause the data
loss. So if SG list entries aren't automatically fetched by the DMA
engine, but are one-by-one manually selected for execution in the
ISRs/deferred work/etc., such problem will eventually happen due to the
non-deterministic latencies of the service execution.
In order to let the DMA consumer know about the DMA device capabilities
regarding the hardware accelerated SG list traversal we introduce the
max_sg_burst capability. It is supposed to be initialized by the DMA engine
driver with 0 if there is no limitation of the number of SG entries
atomically executed and with non-zero value if there is such constraints,
so the upper limit is determined by the number set to the property.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-5-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Some hardware aside from default 0/1 may have greater minimum burst
transactions length constraints. Here we introduce the DMA device
and slave capability, which if required can be initialized by the DMA
engine driver with the device-specific value.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200723005848.31907-4-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The CAP3 register contains information about the number of
HCHAN (High Capacity) and UCHAN (Ultra High Capacity) channels in UDMAP.
Based on this information the start indexes of the levels can be calculated
without a need of a table in the match data.
On am654 the CAP3 does not contain information about the number different
channels. Set up the tpl information based on the available documentation.
This change will allow to use the same compatible for different SoCs where
the only difference is the number of channel types.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200717120903.8774-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Add defines for the CAP register fields to make the code self explaining.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200717120903.8774-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
We only request ring pairs via K3 DMA driver, switch to use the new
k3_ringacc_request_rings_pair() to simplify the code.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
|
|
I've got a silent conflict + two trees based on fixes to merge.
Fixes a silent merge with amdgpu
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
into drm-next
Xilinx ZynqMP DisplayPort Subsystem driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200718001755.GA5962@pendragon.ideasonboard.com
|
|
Document the struct xilinx_dpdma_chan desc field to fix a kerneldoc
undocumented member warning (which can be reproduced by compiling with
W=1).
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200722161747.30048-1-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
xilinx_dpdma_sw_desc_set_dma_addrs() documentation is missing describing
'xdev', so add it
drivers/dma/xilinx/xilinx_dpdma.c:313: warning: Function parameter or
member 'xdev' not described in 'xilinx_dpdma_sw_desc_set_dma_addrs'
Link: https://lore.kernel.org/r/20200718135201.191881-2-vkoul@kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
xilinx_dpdma_config() channel id is unsigned int and compares with
ZYNQMP_DPDMA_VIDEO0 which is zero, so remove this comparison
drivers/dma/xilinx/xilinx_dpdma.c:1073:15: warning: comparison of
unsigned expression in ‘>= 0’ is always true [-Wtype-limits] if
(chan->id >= ZYNQMP_DPDMA_VIDEO0 && chan->id <= ZYNQMP_DPDMA_VIDEO2)
Link: https://lore.kernel.org/r/20200718135201.191881-1-vkoul@kernel.org
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Extend NXP QDMA driver to check transmission errors
The NXP QDMA driver (fsl-qdma.c) does not check the status bits
that indicate if a DMA transfer has been completed successfully.
This patch extends the driver to do exactly this.
Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com>
Link: https://lore.kernel.org/r/744443c0462aac2df4754f99500a911527c0b235.camel@bosch.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The ZynqMP DisplayPort subsystem includes a DMA engine called DPDMA with
6 DMa channels (4 for display and 2 for audio). This driver exposes the
DPDMA through the dmaengine API, to be used by audio (ALSA) and display
(DRM) drivers for the DisplayPort subsystem.
Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Tejas Upadhyay <tejasu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20200717013337.24122-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine into master
Pull dmaengine fixes from Vinod Koul:
- update dmaengine tree location to kernel.org
- dmatest fix for completing threads
- driver fixes for k3dma, fsl-dma, idxd, ,tegra, and few other drivers
* tag 'dmaengine-fix-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (21 commits)
dmaengine: ioat setting ioat timeout as module parameter
dmaengine: fsl-edma: fix wrong tcd endianness for big-endian cpu
dmaengine: dmatest: stop completed threads when running without set channel
dmaengine: fsl-edma-common: correct DSIZE_32BYTE
dmaengine: dw: Initialize channel before each transfer
dmaengine: idxd: fix misc interrupt handler thread unmasking
dmaengine: idxd: cleanup workqueue config after disabling
dmaengine: tegra210-adma: Fix runtime PM imbalance on error
dmaengine: mcf-edma: Fix NULL pointer exception in mcf_edma_tx_handler
dmaengine: fsl-edma: Fix NULL pointer exception in fsl_edma_tx_handler
dmaengine: fsl-edma: Add lockdep assert for exported function
dmaengine: idxd: fix hw descriptor fields for delta record
dmaengine: ti: k3-udma: add missing put_device() call in of_xudma_dev_get()
dmaengine: sh: usb-dmac: set tx_result parameters
dmaengine: ti: k3-udma: Fix delayed_work usage for tx drain workaround
dmaengine: idxd: fix cdev locking for open and release
dmaengine: imx-sdma: Fix: Remove 'always true' comparison
MAINTAINERS: switch dmaengine tree to kernel.org
dmaengine: ti: k3-udma: Fix the running channel handling in alloc_chan_resources
dmaengine: ti: k3-udma: Fix cleanup code for alloc_chan_resources
...
|
|
phys_complete
Fixes the following W=1 kernel build warning(s):
drivers/dma/ioat/dma.c:202: warning: Function parameter or member 'ioat_chan' not described in 'ioat_update_pending'
drivers/dma/ioat/dma.c:202: warning: Excess function parameter 'ioat' description in 'ioat_update_pending'
drivers/dma/ioat/dma.c:465: warning: Function parameter or member 'ioat_chan' not described in 'ioat_check_space_lock'
drivers/dma/ioat/dma.c:465: warning: Excess function parameter 'ioat' description in 'ioat_check_space_lock'
drivers/dma/ioat/dma.c:591: warning: Function parameter or member 'ioat_chan' not described in '__cleanup'
drivers/dma/ioat/dma.c:591: warning: Function parameter or member 'phys_complete' not described in '__cleanup'
drivers/dma/ioat/dma.c:591: warning: Excess function parameter 'ioat' description in '__cleanup'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Leonid Ravich <Leonid.Ravich@emc.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-18-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/dma/ioat/init.c:608: warning: Function parameter or member 'c' not described in 'ioat_free_chan_resources'
drivers/dma/ioat/init.c:608: warning: Excess function parameter 'chan' description in 'ioat_free_chan_resources'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-17-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
attribute docs
Fixes the following W=1 kernel build warning(s):
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'clk' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'reg_clk' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'irq_tasklet' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'hw_queue_idx' not described in 'mv_xor_v2_device'
drivers/dma/mv_xor_v2.c:168: warning: Function parameter or member 'msi_desc' not described in 'mv_xor_v2_device'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-16-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/dma/xgene-dma.c:310: warning: Function parameter or member 'dev' not described in 'xgene_dma'
drivers/dma/xgene-dma.c:310: warning: Function parameter or member 'clk' not described in 'xgene_dma'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Prasad Sahu <rsahu@apm.com>
Cc: Loc Ho <lho@apm.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-15-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/dma/nbpfaxi.c:157: warning: Function parameter or member 'chan' not described in 'nbpf_desc'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'tasklet' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_addr' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_width' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_src_burst' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_addr' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_width' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'slave_dst_burst' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'running' not described in 'nbpf_channel'
drivers/dma/nbpfaxi.c:220: warning: Function parameter or member 'paused' not described in 'nbpf_channel'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: netdev@vger.kernel.org
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20200714111546.1755231-14-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
formatting
Also remove superfluous entry.
Fixes the following W=1 kernel build warning(s):
drivers/dma/iop-adma.c:418: warning: Function parameter or member 'chan' not described in 'iop_adma_alloc_chan_resources'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-13-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'slave_config' not described in 'sdma_channel'
drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'context_loaded' not described in 'sdma_channel'
drivers/dma/imx-sdma.c:383: warning: Function parameter or member 'terminate_worker' not described in 'sdma_channel'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-12-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Kerneldoc formatting for attributes should be '@.*: '.
Fixes the following W=1 kernel build warning(s):
drivers/dma/fsl-qdma.c:154: warning: Function parameter or member 'data' not described in 'fsl_qdma_format'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Wen He <wen.he_1@nxp.com>
Cc: Jiaheng Fan <jiaheng.fan@nxp.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-11-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
blocks
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/dma/sun4i-dma.c:321: warning: Function parameter or member 'priv' not described in '__execute_vchan_pending'
drivers/dma/sun4i-dma.c:321: warning: Function parameter or member 'vchan' not described in '__execute_vchan_pending'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'chan' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'src' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'dest' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'len' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'sconfig' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:435: warning: Function parameter or member 'direction' not described in 'generate_ndma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'chan' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'src' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'dest' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'len' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:501: warning: Function parameter or member 'sconfig' not described in 'generate_ddma_promise'
drivers/dma/sun4i-dma.c:577: warning: Function parameter or member 'contract' not described in 'get_next_cyclic_promise'
drivers/dma/sun4i-dma.c:596: warning: Function parameter or member 'vd' not described in 'sun4i_dma_free_contract'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: "Emilio López" <emilio@elopez.com.ar>
Link: https://lore.kernel.org/r/20200714111546.1755231-10-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
headers
Fixes the following W=1 kernel build warning(s):
drivers/dma/at_hdmac.c:666: warning: Function parameter or member 'tx' not described in 'atc_tx_submit'
drivers/dma/at_hdmac.c:666: warning: Excess function parameter 'desc' description in 'atc_tx_submit'
drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'reg_width' not described in 'atc_dma_cyclic_check_values'
drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'buf_addr' not described in 'atc_dma_cyclic_check_values'
drivers/dma/at_hdmac.c:1206: warning: Function parameter or member 'period_len' not described in 'atc_dma_cyclic_check_values'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'chan' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'desc' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'period_index' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'buf_addr' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'reg_width' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'period_len' not described in 'atc_dma_cyclic_fill_desc'
drivers/dma/at_hdmac.c:1228: warning: Function parameter or member 'direction' not described in 'atc_dma_cyclic_fill_desc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-9-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fix some misspelling/description issues, demote non-kerneldoc header
to standard comment block and provide a new description for
msgdma_desc_config()'s 'stride' parameter.
Fixes the following W=1 kernel build warning(s):
drivers/dma/altera-msgdma.c:163: warning: Function parameter or member 'node' not described in 'msgdma_sw_desc'
drivers/dma/altera-msgdma.c:163: warning: Function parameter or member 'tx_list' not described in 'msgdma_sw_desc'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'lock' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dev' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'irq_tasklet' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'pending_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'free_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'active_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'done_list' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'desc_free_cnt' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'idle' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dmadev' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'dmachan' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'hw_desq' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'sw_desq' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'npendings' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'slave_cfg' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'irq' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'csr' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'desc' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:197: warning: Function parameter or member 'resp' not described in 'msgdma_device'
drivers/dma/altera-msgdma.c:265: warning: Function parameter or member 'stride' not described in 'msgdma_desc_config'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Stefan Roese <sr@denx.de>
Link: https://lore.kernel.org/r/20200714111546.1755231-8-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/dma/ste_dma40.c:398: warning: Function parameter or member 'dma_addr' not described in 'd40_lcla_pool'
drivers/dma/ste_dma40.c:601: warning: Function parameter or member 'dma_parms' not described in 'd40_base'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Per Forlin <per.forlin@stericsson.com>
Cc: Jonas Aaberg <jonas.aberg@stericsson.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-7-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
No 'struct' title is provided. Nor are any attribute descriptions.
Fixes the following W=1 kernel build warning(s):
drivers/dma/pl330.c:295: warning: cannot understand function prototype: 'struct pl330_reqcfg '
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Jaswinder Singh <jassi.brar@samsung.com>
Link: https://lore.kernel.org/r/20200714111546.1755231-6-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
blocks
No attempt has been made to document any of the demoted functions here.
Fixes the following W=1 kernel build warning(s):
drivers/dma/mmp_pdma.c:298: warning: Function parameter or member 'chan' not described in 'start_pending_queue'
drivers/dma/mmp_pdma.c:393: warning: Function parameter or member 'dchan' not described in 'mmp_pdma_alloc_chan_resources'
drivers/dma/mmp_pdma.c:862: warning: Function parameter or member 'dchan' not described in 'mmp_pdma_issue_pending'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-5-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
A couple of entries were missed, causing kerneldoc to complain.
Fixes the following W=1 kernel build warning(s):
drivers/dma/ep93xx_dma.c:183: warning: Function parameter or member 'slave_config' not described in 'ep93xx_dma_chan'
drivers/dma/ep93xx_dma.c:215: warning: Function parameter or member 'hw_synchronize' not described in 'ep93xx_dma_engine'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Mika Westerberg <mika.westerberg@iki.fi>
Link: https://lore.kernel.org/r/20200714111546.1755231-4-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Fixes the following W=1 kernel build warning(s):
drivers/dma/of-dma.c:57: warning: Function parameter or member 'ofdma' not described in 'of_dma_router_xlate'
drivers/dma/of-dma.c:57: warning: Excess function parameter 'of_dma' description in 'of_dma_router_xlate'
drivers/dma/of-dma.c:107: warning: Function parameter or member 'data' not described in 'of_dma_controller_register'
drivers/dma/of-dma.c:308: warning: Function parameter or member 'ofdma' not described in 'of_dma_simple_xlate'
drivers/dma/of-dma.c:308: warning: Excess function parameter 'of_dma' description in 'of_dma_simple_xlate'
drivers/dma/of-dma.c:338: warning: Function parameter or member 'ofdma' not described in 'of_dma_xlate_by_chan_id'
drivers/dma/of-dma.c:338: warning: Excess function parameter 'of_dma' description in 'of_dma_xlate_by_chan_id'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20200714111546.1755231-3-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
doc block
Struct attribute names must be an exact match or the kerneldoc checker
gets confused.
Fixes the following W=1 kernel build warning(s):
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc1' not described in 'mtk_hsdma_pdesc'
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc2' not described in 'mtk_hsdma_pdesc'
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc3' not described in 'mtk_hsdma_pdesc'
drivers/dma/mediatek/mtk-hsdma.c:120: warning: Function parameter or member 'desc4' not described in 'mtk_hsdma_pdesc'
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Cc: Sean Wang <sean.wang@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-mediatek@lists.infradead.org
Link: https://lore.kernel.org/r/20200714111546.1755231-2-lee.jones@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes.
This code was detected with the help of Coccinelle and, audited and
fixed manually.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Addresses-KSPP-ID: https://github.com/KSPP/linux/issues/83
Link: https://lore.kernel.org/r/20200619224334.GA7857@embeddedor
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Move the uc->tchan/rchan checks to the IO wrappers itself instead of
calling the functions with tchan/rchan directly.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-6-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
Instead of using higher level wrappers (udma_rchanrt/tchanrt read/write),
use the underlying register access functions directly.
This will allow changes in the higher level wrappers within the DMAengine
driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20200707102352.28773-5-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|