summaryrefslogtreecommitdiff
path: root/drivers/dma/ste_dma40.c
AgeCommit message (Collapse)AuthorFilesLines
2016-06-21dmaengine: Remove site specific OOM error messages on kzallocPeter Griffin1-3/+1
If kzalloc() fails it will issue it's own error message including a dump_stack(). So remove the site specific error messages. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-21dmaengine: ste_dma40: Only calculate residue if txstate exists.Peter Griffin1-1/+1
There is no point calculating the residue if there is no txstate to store the value. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-10ste_dma40: Delete an unnecessary variable initialisation in d40_probe()Markus Elfring1-1/+1
The variable "res" will eventually be set to a resource pointer from a call of the d40_hw_detect_init(() function. Thus let us omit the explicit initialisation at the beginning. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-10ste_dma40: Delete another unnecessary check in d40_probe()Markus Elfring1-42/+40
A single jump label was used by the d40_probe() function in several cases for error handling which was a bit inefficient here. * This implementation detail could be improved by the introduction of another jump label. * Remove an extra check for the variable "base". * Omit its explicit initialisation at the beginning then. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-12-10ste_dma40: Delete an unnecessary check before the function call ↵Markus Elfring1-2/+1
"kmem_cache_destroy" The kmem_cache_destroy() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-25dmaengine: ste_dma40: fix a trivial typoGeliang Tang1-1/+1
s/regsiter/register/ Signed-off-by: Geliang Tang <geliangtang@163.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-05dmaengine: Add an enum for the dmaengine alignment constraintsMaxime Ripard1-1/+1
Most drivers need to set constraints on the buffer alignment for async tx operations. However, even though it is documented, some drivers either use a defined constant that is not matching what the alignment variable expects (like DMA_BUSWIDTH_* constants) or fill the alignment in bytes instead of power of two. Add a new enum for these alignments that matches what the framework expects, and convert the drivers to it. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-04-24Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-2/+4
Pull slave-dmaengine updates from Vinod Koul: - new drivers for: - Ingenic JZ4780 controller - APM X-Gene controller - Freescale RaidEngine device - Renesas USB Controller - remove device_alloc_chan_resources dummy handlers - sh driver cleanups for peri peri and related emmc and asoc patches as well - fixes and enhancements spread over the drivers * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits) dmaengine: dw: don't prompt for DW_DMAC_CORE dmaengine: shdmac: avoid unused variable warnings dmaengine: fix platform_no_drv_owner.cocci warnings dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe() dmaengine: at_xdmac: unlock spin lock before return dmaengine: xgene: devm_ioremap() returns NULL on error dmaengine: xgene: buffer overflow in xgene_dma_init_channels() dmaengine: usb-dmac: Fix dereferencing freed memory 'desc' dmaengine: sa11x0: report slave capabilities to upper layers dmaengine: vdma: Fix compilation warnings dmaengine: fsl_raid: statify fsl_re_chan_probe dmaengine: Driver support for FSL RaidEngine device. dmaengine: xgene_dma_init_ring_mngr() can be static Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes dmaengine: Add support for APM X-Gene SoC DMA engine driver dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver dmaengine: renesas,usb-dmac: Add device tree bindings documentation dmaengine: edma: fixed wrongly initialized data parameter to the edma callback dmaengine: ste_dma40: fix implicit conversion ...
2015-04-01dmaengine: ste_dma40: fix implicit conversionStefan Agner1-2/+4
The function d40_prep_sg takes the type enum dma_transfer_direction as second last parameter. However, the memcpy calls pass DMA_NONE which is of type enum dma_data_direction. Fix this by passing the actual transfer direction DMA_MEM_TO_MEM. This does not change the actual code flow since only the transfer direction DMA_MEM_TO_DEV and DMA_DEV_TO_MEM are actually used in the function d40_prep_sg. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-02-26Staging: drivers: dma: Add space before (Dilek Uzulmez1-1/+1
This patch fixes checkpatch.pl error in file ste_dma40.c ERROR: space required before the open parenthesis '(' Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-22dmaengine: ste_dma: fix incompatible pointer type warnsVinod Koul1-1/+2
drivers/dma/ste_dma40.c:2627:3: warning: 'return' with a value, in function returning void [enabled by default] drivers/dma/ste_dma40.c: In function 'd40_ops_init': drivers/dma/ste_dma40.c:2869:28: warning: assignment from incompatible pointer type [enabled by default] The function prototype expects return type 'int' whereas these where void Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-22dmaengine: d40: Split device_controlMaxime Ripard1-32/+28
Split the device_control callback of the ST-Ericsson DMA 40 driver to make use of the newly introduced callbacks, that will eventually be used to retrieve slave capabilities. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-14Merge tag 'driver-core-3.19-rc1' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core update from Greg KH: "Here's the set of driver core patches for 3.19-rc1. They are dominated by the removal of the .owner field in platform drivers. They touch a lot of files, but they are "simple" changes, just removing a line in a structure. Other than that, a few minor driver core and debugfs changes. There are some ath9k patches coming in through this tree that have been acked by the wireless maintainers as they relied on the debugfs changes. Everything has been in linux-next for a while" * tag 'driver-core-3.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (324 commits) Revert "ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries" fs: debugfs: add forward declaration for struct device type firmware class: Deletion of an unnecessary check before the function call "vunmap" firmware loader: fix hung task warning dump devcoredump: provide a one-way disable function device: Add dev_<level>_once variants ath: ath9k: use debugfs_create_devm_seqfile() helper for seq_file entries ath: use seq_file api for ath9k debugfs files debugfs: add helper function to create device related seq_file drivers/base: cacheinfo: remove noisy error boot message Revert "core: platform: add warning if driver has no owner" drivers: base: support cpu cache information interface to userspace via sysfs drivers: base: add cpu_device_create to support per-cpu devices topology: replace custom attribute macros with standard DEVICE_ATTR* cpumask: factor out show_cpumap into separate helper function driver core: Fix unbalanced device reference in drivers_probe driver core: fix race with userland in device_add() sysfs/kernfs: make read requests on pre-alloc files use the buffer. sysfs/kernfs: allow attributes to request write buffer be pre-allocated. fs: sysfs: return EGBIG on write if offset is larger than file size ...
2014-12-12Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-0/+1
Pull dmaengine updates from Vinod Koul: "Main features this time are: - BAM v1.3.0 support form qcom bam dma - support for Allwinner sun8i dma - atmels eXtended DMA Controller driver - chancnt cleanup by Maxime - fixes spread over drivers" * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (56 commits) dmaenegine: Delete a check before free_percpu() dmaengine: ioatdma: fix dma mapping errors dma: cppi41: add a delay while setting the TD bit dma: cppi41: wait longer for the HW to return the descriptor dmaengine: fsl-edma: fixup reg offset and hw S/G support in big-endian model dmaengine: fsl-edma: fix calculation of remaining bytes drivers/dma/pch_dma: declare pch_dma_id_table as static dmaengine: ste_dma40: fix error return code dma: imx-sdma: clarify about firmware not found error Documentation: devicetree: Fix Xilinx VDMA specification dmaengine: pl330: update author info dmaengine: clarify the issue_pending expectations dmaengine: at_xdmac: Add DMA_PRIVATE ARM: dts: at_xdmac: fix bad value of dma-cells in documentation dmaengine: at_xdmac: fix missing spin_unlock dmaengine: at_xdmac: fix a bug in transfer residue computation dmaengine: at_xdmac: fix software lockup at_xdmac_tx_status() dmaengine: at_xdmac: remove chancnt affectation dmaengine: at_xdmac: prefer usage of readl/writel_relaxed dmaengine: xdmac: fix print warning on dma_addr_t variable ...
2014-12-05dmaengine: ste_dma40: fix error return codeJulia Lawall1-0/+1
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-12-04PM: Merge the SET*_RUNTIME_PM_OPS() macrosRafael J. Wysocki1-1/+1
The SET_PM_RUNTIME_PM_OPS() and SET_RUNTIME_PM_OPS() macros are identical except that one of them is not empty for CONFIG_PM set, while the other one is not empty for CONFIG_PM_RUNTIME set, respectively. However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so one of these macros is now redundant. For this reason, replace SET_PM_RUNTIME_PM_OPS() with SET_RUNTIME_PM_OPS() everywhere and redefine the SET_PM_RUNTIME_PM_OPS symbol as SET_RUNTIME_PM_OPS in case new code is starting to use the macro being removed here. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-20dma: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-08-04dmaengine: Remove the context argument to the prep_dma_cyclic operationLaurent Pinchart1-2/+1
The argument is always set to NULL and never used. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dma: ste_dma40: Convert to the late system PM callbacksUlf Hansson1-1/+1
Clients may still be active in the early phase of system PM, thus we need to move the suspend operations to the late system PM phase. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dma: ste_dma40: Fixup system suspend/resumeUlf Hansson1-3/+10
Make sure to handle register context save/restore when needed from system PM callbacks. Previously we solely trusted the device to reside in in-active state while the system suspend callback were invoked, which is just too optimistic. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dma: ste_dma40: Convert to PM macros while providing the PM callbacksUlf Hansson1-79/+71
Converting to the PM macros makes us simplify and remove some code. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dma: ste_dma40: Don't require CONFIG_PM_RUNTIMEUlf Hansson1-11/+10
While probing, don't rely on CONFIG_PM_RUNTIME to be configured. Instead, let's power up the device and make it fully operational. Update the runtime PM status to reflect the active state. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-05-07dma: ste_dma40: Maintain spinlock order while handling pauseUlf Hansson1-1/+1
The runtime PM resume callback needs to be executed while holding the spinlock, make sure to maintain this for the pause operation as well. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-02-17dma: ste_dma40: don't dereference free:d descriptorLinus Walleij1-1/+3
It appears that in the DMA40 driver the DMA tasklet will very often dereference memory for a descriptor just free:d from the DMA40 slab. Nothing happens because no other part of the driver has yet had a chance to claim this memory, but it's really nasty to dereference free:d memory, so let's check the flag before the descriptor is free and store it in a bool variable. Cc: stable@vger.kernel.org Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-11-26dma: ste_dma40: Parse flags property for new 'high priority channel' requestLee Jones1-0/+4
This is used for MSP (audio) devices which is about to be fully DT:ed. Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-10-25dmaengine: ste: use DMA_COMPLETE for dma completion statusVinod Koul1-1/+1
Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-10-07DMA: ste_dma40: use a power of 2 checkGuennadi Liakhovetski1-2/+3
dst_addr_width and src_addr_width should be a power of 2. Currently the driver checks, that they both lie between 1 and 8 and that they are equal to 1 or even. This however leaves an invalid value of 6 uncaught. Use an explicit power of 2 check instead. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> [typo fix on changelog] Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dma: ste_dma40: Fix potential null pointer dereferenceSachin Kamat1-0/+3
kcalloc can return NULL. Check the pointer before dereferencing. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-09-02dma: ste_dma40: Remove duplicate constSachin Kamat1-1/+1
'const' was added twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-25dmaengine: ste_dma40: off by one in d40_of_probe()Dan Carpenter1-1/+1
If "num_disabled" is equal to STEDMA40_MAX_PHYS (32) then we would write one space beyond the end of the pdata->disable_channels[] array. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-25dma: ste_dma: Fix warning when CONFIG_ARM_LPAE=yFabio Estevam1-7/+5
When CONFIG_ARM_LPAE=y the following build warning are generated: drivers/dma/ste_dma40.c:3228:2: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat] drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' [-Wformat] drivers/dma/ste_dma40.c:3582:3: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat] drivers/dma/ste_dma40.c:3593:5: warning: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'resource_size_t' [-Wformat] According to Documentation/printk-formats.txt '%pa' can be used to properly print 'resource_size_t'. Also, for printing memory region the '%pr' is more convenient. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-08-13dma: use dev_get_platdata()Jingoo Han1-2/+2
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-06-25Merge tag 'ux500-dma40-for-arm-soc-3' of ↵Olof Johansson1-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers From Linus Walleij: DMA40 fixes for earlier submitted driver patches: - Fix various error path and sparse bugs in the DMA40 driver - Fix various compile errors in the ux500 crypto driver (dependent on the DMA40 changes). * tag 'ux500-dma40-for-arm-soc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: crypto: ux500: use dmaengine_submit API crypto: ux500: use dmaengine_prep_slave_sg API crypto: ux500: use dmaengine_device_control API crypto: ux500/crypt: add missing __iomem qualifiers crypto: ux500/hash: add missing static qualifiers crypto: ux500/hash: use readl on iomem addresses dmaengine: ste_dma40: Declare memcpy config as static dmaengine: ste_dma40: fix error return code in d40_probe() Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-24dmaengine: ste_dma40: Declare memcpy config as staticFabio Baltieri1-2/+2
Fix sparse warnings: drivers/dma/ste_dma40.c:81:26: warning: symbol 'dma40_memcpy_conf_phy' was not declared. Should it be static? drivers/dma/ste_dma40.c:95:26: warning: symbol 'dma40_memcpy_conf_log' was not declared. Should it be static? Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-14Merge tag 'ux500-dma40-for-arm-soc-2' of ↵Olof Johansson1-84/+115
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/drivers From Linus Walleij: Second set of DMA40 changes: refactorings and device tree support for the DMA40. Now with MUSB and some platform data removal. * tag 'ux500-dma40-for-arm-soc-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: dmaengine: ste_dma40: Fetch disabled channels from DT dmaengine: ste_dma40: Fetch the number of physical channels from DT ARM: ux500: Stop passing DMA platform data though AUXDATA dmaengine: ste_dma40: Allow memcpy channels to be configured from DT dmaengine: ste_dma40_ll: Replace meaningless register set with comment dmaengine: ste_dma40: Convert data_width from register bit format to value dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'s ARM: ux500: Remove recently unused stedma40_xfer_dir enums dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with generic ones ARM: ux500: Replace ST-E's home-brew DMA direction definition with the generic one dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'s ARM: ux500: Remove empty function u8500_of_init_devices() ARM: ux500: Remove ux500-musb platform registation when booting with DT usb: musb: ux500: add device tree probing support usb: musb: ux500: attempt to find channels by name before using pdata usb: musb: ux500: harden checks for platform data usb: musb: ux500: take the dma_mask from coherent_dma_mask usb: musb: ux500: move the MUSB HDRC configuration into the driver usb: musb: ux500: move channel number knowledge into the driver
2013-06-12Merge tag 's3c24xx-driver-1' of ↵Olof Johansson1-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/drivers From Kukjin Kim, driver updats for s3c24xx: - move cpufreq driver into drivers/ - add pinctrl-s3c24xx driver - cleanup OF in gpio driver Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-04dmaengine: ste_dma40: fix error return code in d40_probe()Wei Yongjun1-7/+7
In many of the error handling case, the return value 'ret' not set and 0 will be return from d40_probe() even if error, but we should return a negative error code instead in those error handling case. This patch fixed them, and also removed useless variable 'err'. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04dmaengine: ste_dma40: Fetch disabled channels from DTLee Jones1-1/+16
Some platforms have channels which are not available for normal use. This information is currently passed though platform data in internal BSP kernels. Once those platforms land, they'll need to configure them appropriately, so we may as well add the infrastructure. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04dmaengine: ste_dma40: Fetch the number of physical channels from DTLee Jones1-1/+6
Some platforms insist on obscure physical channel availability. This information is currently passed though platform data in internal BSP kernels. Once those platforms land, they'll need to configure them appropriately, so we may as well add the infrastructure. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04dmaengine: ste_dma40: Allow memcpy channels to be configured from DTLee Jones1-8/+32
At this moment in time the memcpy channels which can be used by the D40 are fixed, as each supported platform in Mainline uses the same ones. However, platforms do exist which don't follow this convention, so these will need to be tailored. Fortunately, these platforms will be DT only, so this change has very little impact on platform data. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04dmaengine: ste_dma40: Convert data_width from register bit format to valueLee Jones1-38/+25
When a DMA client requests and configures a DMA channel, it requests data_width in Bytes. The DMA40 driver then swiftly converts it over to the necessary register bit value. Unfortunately, for any subsequent calculations we have to shift '1' by the bit pattern (1 << data_width) times to make any sense of it. This patch flips the semantics on its head and only converts the value to its respective register bit pattern when writing to registers. This way we can use the true data_width (in Bytes) value. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with ↵Lee Jones1-28/+28
generic ones STEDMA40_*_TO_* direction definitions are identical in all but name to the pre-defined generic DMA_*_TO_* ones. Let's make things easy by not duplicating such things. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04dmaengine: ste_dma40: Use the BIT macro to replace ugly '(1 << x)'sLee Jones1-10/+10
The aim is to make the code that little more readable. Acked-by: Vinod Koul <vnod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-27dmaengine: ste_dma40: fix pm runtime ref countingRabin Vincent1-3/+5
The pm runtime reference counting of the driver is broken for the case when there is more than one transfer queued, leading to the device being runtime suspend while active. Fix it. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-05-23dmaengine: ste_dma40: Remove redundant address fetching functionLee Jones1-18/+0
Addresses are now stored in local data structures and are easy to obtain, thus a specialist function used to fetch them is now surplus to requirement. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-23dmaengine: ste_dma40: Only use addresses passed as configuration informationLee Jones1-40/+11
Addresses are passed in from the client's driver via the invocation of dmaengine_slave_config(), so there's no need to fetch them from platform data too, hardwired or otherwise. This is a great step forward, as it elevates a large burden from platform data in the way of a look-up table. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-23dmaengine: ste_dma40: Don't configure runtime configurable setup during allocateLee Jones1-3/+3
Using the dmaengine API for slave transfers, allocating and configuring a channel are two separate actions. Here we're removing logical channel configuration from the channel allocation routine for slave transfers, as the same config is already done in the runtime config function, and put the corresponding call into d40_config_memcpy() for the memcpy code path. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> [Edited the commit message] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-23dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()Lee Jones1-5/+9
The majority of configuration done in d40_phy_config() pertains to physical channels. Move the call over to runtime config which has different code paths for physical and logical channels already, and make it an exclusive physical channel config function as the name implies, and drop the is_log argument. Since we moved the call to runtime_config() it only gets called for device transfers, so encode the small snippet of configuration pertaining to memcpy channels into the d40_config_memcpy() function. Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [rewrote the commit message] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-23dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmaskingLee Jones1-0/+4
During the initial setup of a logical channel, it is necessary to unmask the GIM in order to receive generated terminal count and error interrupts. We're separating out this required code so it will be possible to move the remaining code in d40_phy_cfg(), which is mostly runtime configuration into the runtime_config() routine. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-23dmaengine: ste_dma40: Supply full Device Tree parsing supportLee Jones1-0/+52
Using the new DMA DT bindings and API, we can register the DMA40 driver as Device Tree capable. Now, when a client attempts to allocate a channel using the DMA DT bindings via its own node, we are able to parse the request and allocate a channel in the correct manner. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Cc: Rob Herring <rob.herring@calxeda.com> Cc: devicetree-discuss@lists.ozlabs.org Acked-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 17:05:46 +0000