summaryrefslogtreecommitdiff
path: root/drivers/dma/dmaengine.c
AgeCommit message (Collapse)AuthorFilesLines
2020-07-27dmaengine: Introduce DMA-device device_caps callbackSerge Semin1-0/+10
There are DMA devices (like ours version of Synopsys DW DMAC) which have DMA capabilities non-uniformly redistributed between the device channels. In order to provide a way of exposing the channel-specific parameters to the DMA engine consumers, we introduce a new DMA-device callback. In case if provided it gets called from the dma_get_slave_caps() method and is able to override the generic DMA-device capabilities. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200723005848.31907-6-Sergey.Semin@baikalelectronics.ru Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-27dmaengine: Introduce max SG burst capabilitySerge Semin1-0/+1
Some devices may lack the support of the hardware accelerated SG list entries automatic walking through and execution. In this case a burden of the SG list traversal and DMA engine re-initialization lies on the DMA engine driver (normally implemented by using a DMA transfer completion IRQ to recharge the DMA device with a next SG list entry). But such solution may not be suitable for some DMA consumers. In particular SPI devices need both Tx and Rx DMA channels work synchronously in order to avoid the Rx FIFO overflow. In case if Rx DMA channel is paused for some time while the Tx DMA channel works implicitly pulling data into the Rx FIFO, the later will be eventually overflown, which will cause the data loss. So if SG list entries aren't automatically fetched by the DMA engine, but are one-by-one manually selected for execution in the ISRs/deferred work/etc., such problem will eventually happen due to the non-deterministic latencies of the service execution. In order to let the DMA consumer know about the DMA device capabilities regarding the hardware accelerated SG list traversal we introduce the max_sg_burst capability. It is supposed to be initialized by the DMA engine driver with 0 if there is no limitation of the number of SG entries atomically executed and with non-zero value if there is such constraints, so the upper limit is determined by the number set to the property. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200723005848.31907-5-Sergey.Semin@baikalelectronics.ru Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-07-27dmaengine: Introduce min burst length capabilitySerge Semin1-0/+1
Some hardware aside from default 0/1 may have greater minimum burst transactions length constraints. Here we introduce the DMA device and slave capability, which if required can be initialized by the DMA engine driver with the device-specific value. Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200723005848.31907-4-Sergey.Semin@baikalelectronics.ru Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-06-10Merge tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-46/+52
Pull dmaengine updates from Vinod Koul: "A fairly small dmaengine update which includes mostly driver updates (dmatest, dw-edma, ioat, mmp-tdma and k3-udma) along with Renesas binding update to json-schema" * tag 'dmaengine-5.8-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (39 commits) dmaengine: imx-sdma: initialize all script addresses dmaengine: ti: k3-udma: Use proper return code in alloc_chan_resources dmaengine: ti: k3-udma: Remove udma_chan.in_ring_cnt dmaengine: ti: k3-udma: Add missing dma_sync call for rx flush descriptor dmaengine: at_xdmac: Replace zero-length array with flexible-array dmaengine: at_hdmac: Replace zero-length array with flexible-array dmaengine: qcom: bam_dma: Replace zero-length array with flexible-array dmaengine: ti: k3-udma: Use PTR_ERR_OR_ZERO() to simplify code dmaengine: moxart-dma: Drop pointless static qualifier in moxart_probe() dmaengine: sf-pdma: Simplify the error handling path in 'sf_pdma_probe()' dmaengine: qcom_hidma: use true,false for bool variable dmaengine: dw-edma: support local dma device transfer semantics dmaengine: Fix doc strings to satisfy validation script dmaengine: Include dmaengine.h into dmaengine.c dmaengine: dmatest: Describe members of struct dmatest_info dmaengine: dmatest: Describe members of struct dmatest_params dmaengine: dmatest: Allow negative timeout value to specify infinite wait Revert "dmaengine: dmatest: timeout value of -1 should specify infinite wait" dmaengine: stm32-dma: direct mode support through device tree dt-bindings: dma: add direct mode support through device tree in stm32-dma ...
2020-05-04dmaengine: Fix doc strings to satisfy validation scriptAndy Shevchenko1-46/+50
The validation kernel doc script complains about undescribed function parameters .../dmaengine.c:155: warning: Function parameter or member 'dev' not descr ibed in 'dev_to_dma_chan' .../dmaengine.c:251: warning: cannot understand function prototype: 'dma_cap_mask_t dma_cap_mask_all; ' .../dmaengine.c:257: warning: cannot understand function prototype: 'struct dma_chan_tbl_ent ' .../dmaengine.c:264: warning: cannot understand function prototype: 'struct dma_chan_tbl_ent __percpu *channel_table[DMA_TX_TYPE_END]; ' .../dmaengine.c:304: warning: Function parameter or member 'chan' not described in 'dma_chan_is_local' .../dmaengine.c:304: warning: Function parameter or member 'cpu' not described in 'dma_chan_is_local' .../dmaengine.c:414: warning: Function parameter or member 'chan' not described in 'balance_ref_count' .../dmaengine.c:447: warning: Function parameter or member 'chan' not described in 'dma_chan_get' .../dmaengine.c:494: warning: Function parameter or member 'chan' not described in 'dma_chan_put' Add descriptions to the function parameters and in some cases update existing text as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200429122151.50989-2-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-05-04dmaengine: Include dmaengine.h into dmaengine.cAndy Shevchenko1-0/+2
Compiler is not happy about non-static functions due to missed inclusion .../dmaengine.c:682:18: warning: no previous prototype for ‘dma_get_slave_channel’ [-Wmissing-prototypes] 682 | struct dma_chan *dma_get_slave_channel(struct dma_chan *chan) | ^~~~~~~~~~~~~~~~~~~~~ .../dmaengine.c:713:18: warning: no previous prototype for ‘dma_get_any_slave_channel’ [-Wmissing-prototypes] 713 | struct dma_chan *dma_get_any_slave_channel(struct dma_device *device) | ^~~~~~~~~~~~~~~~~~~~~~~~~ Include missed header to satisfy compiler. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200429122151.50989-1-andriy.shevchenko@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-27dmaengine: fix channel index enumerationDave Jiang1-34/+26
When the channel register code was changed to allow hotplug operations, dynamic indexing wasn't taken into account. When channels are randomly plugged and unplugged out of order, the serial indexing breaks. Convert channel indexing to using IDA tracking in order to allow dynamic assignment. The previous code does not cause any regression bug for existing channel allocation besides idxd driver since the hotplug usage case is only used by idxd at this point. With this change, the chan->idr_ref is also not needed any longer. We can have a device with no channels registered due to hot plug. The channel device release code no longer should attempt to free the dma device id on the last channel release. Fixes: e81274cd6b52 ("dmaengine: add support to dynamic register/unregister of channels") Reported-by: Yixin Zhang <yixin.zhang@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Tested-by: Yixin Zhang <yixin.zhang@intel.com> Link: https://lore.kernel.org/r/158679961260.7674.8485924270472851852.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-04-02Merge tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-1/+101
Pull dmaengine updates from Vinod Koul: "Core: - Some code cleanup and optimization in core by Andy - Debugfs support for displaying dmaengine channels by Peter Drivers: - New driver for uniphier-xdmac controller - Updates to stm32 dma, mdma and dmamux drivers and PM support - More updates to idxd drivers - Bunch of changes in tegra-apb driver and cleaning up of pm functions - Bunch of spelling fixes and Replace zero-length array patches - Shutdown hook for fsl-dpaa2-qdma driver - Support for interleaved transfers for ti-edma and virtualization support for k3-dma driver - Support for reset and updates in xilinx_dma driver - Improvements and locking updates in at_hdma driver" * tag 'dmaengine-5.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits) dt-bindings: dma: renesas,usb-dmac: add r8a77961 support dmaengine: uniphier-xdmac: Remove redandant error log for platform_get_irq dmaengine: tegra-apb: Improve DMA synchronization dmaengine: tegra-apb: Don't save/restore IRQ flags in interrupt handler dmaengine: tegra-apb: mark PM functions as __maybe_unused dmaengine: fix spelling mistake "exceds" -> "exceeds" dmaengine: sprd: Set request pending flag when DMA controller is active dmaengine: ppc4xx: Use scnprintf() for avoiding potential buffer overflow dmaengine: idxd: remove global token limit check dmaengine: idxd: reflect shadow copy of traffic class programming dmaengine: idxd: Merge definition of dsa_batch_desc into dsa_hw_desc dmaengine: Create debug directories for DMA devices dmaengine: ti: k3-udma: Implement custom dbg_summary_show for debugfs dmaengine: Add basic debugfs support dmaengine: fsl-dpaa2-qdma: remove set but not used variable 'dpaa2_qdma' dmaengine: ti: edma: fix null dereference because of a typo in pointer name dmaengine: fsl-dpaa2-qdma: Adding shutdown hook dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver dt-bindings: dmaengine: Add UniPhier external DMA controller bindings dmaengine: ti: k3-udma: Implement support for atype (for virtualization) ...
2020-03-11dmaengine: Create debug directories for DMA devicesPeter Ujfalusi1-1/+27
Create a placeholder directory for each registered DMA device. DMA drivers can use the dmaengine_get_debugfs_root() call to get their debugfs root and can populate with custom files to aim debugging. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200306142839.17910-4-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-11dmaengine: Add basic debugfs supportPeter Ujfalusi1-1/+75
Via the /sys/kernel/debug/dmaengine/summary users can get information about the DMA devices and the used channels. Example output on am654-evm with audio using two channels and after running dmatest on 4 channels: dma0 (285c0000.dma-controller): number of channels: 96 dma1 (31150000.dma-controller): number of channels: 267 dma1chan0 | 2b00000.mcasp:tx dma1chan1 | 2b00000.mcasp:rx dma1chan2 | in-use dma1chan3 | in-use dma1chan4 | in-use dma1chan5 | in-use For slave channels we can show the device and the channel name a given channel is requested. For non slave devices the only information we know is that the channel is in use. DMA drivers can implement the optional dbg_summary_show callback to provide controller specific information instead of the generic one. It is easy to extend the generic dmaengine_summary_show() to print additional information about the used channels. I have taken the idea from gpiolib and clk subsystems. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20200306142839.17910-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-03-11dmaengine: move .device_release missing log warning to debug levelVinod Koul1-1/+1
Dmaengine core warns the drivers registering for missing .device_release implementation. The warning is accurate for dmaengine controllers which hotplug but not for rest. So reduce this to a debug log. Link: https://lore.kernel.org/r/20200306135018.2286959-1-vkoul@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-03dmaengine: Cleanups for the slave <-> channel symlink supportPeter Ujfalusi1-9/+9
No need to use goto to jump over the return chan ? chan : ERR_PTR(-EPROBE_DEFER); We can just revert the check and return right there. Do not fail the channel request if the chan->name allocation fails, but print a warning about it. Change the dev_err to dev_warn if sysfs_create_link() fails as it is not fatal. Only attempt to remove the DMA_SLAVE_NAME symlink if it is created - or it was attempted to be created. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200131093859.3311-2-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-02-03dmaengine: fix null ptr check for __dma_async_device_channel_register()Dave Jiang1-0/+3
Add check to pointer after assignment before accessing members. Fixes: d2fb0a043838: ("dmaengine: break out channel registration") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/158049351973.45445.3291586905226032744.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-30dmaengine: Fix return value for dma_request_chan() in case of failureMarek Szyprowski1-1/+1
Commit 71723a96b8b1 ("dmaengine: Create symlinks between DMA channels and slaves") changed the dma_request_chan() function flow in such a way that it always returns EPROBE_DEFER in case of channels that cannot be found. This break the operation of the devices which have optional DMA channels as it puts their drivers in endless deferred probe loop. Fix this by propagating the proper error value. Fixes: 71723a96b8b1 ("dmaengine: Create symlinks between DMA channels and slaves") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200130070834.17537-1-m.szyprowski@samsung.com [vkoul: fix typo in patch title] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: Create symlinks between DMA channels and slavesGeert Uytterhoeven1-6/+31
Currently it is not easy to find out which DMA channels are in use, and which slave devices are using which channels. Fix this by creating two symlinks between the DMA channel and the actual slave device when a channel is requested: 1. A "slave" symlink from DMA channel to slave device, 2. A "dma:<name>" symlink slave device to DMA channel. When the channel is released, the symlinks are removed again. The latter requires keeping track of the slave device and the channel name in the dma_chan structure. Note that this is limited to channel request functions for requesting an exclusive slave channel that take a device pointer (dma_request_chan() and dma_request_slave_channel*()). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Link: https://lore.kernel.org/r/20200117153056.31363-1-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: add support to dynamic register/unregister of channelsDave Jiang1-8/+26
With the channel registration routines broken out, now add support code to allow independent registering and unregistering of channels in a hotplug fashion. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965023364.73301.7821862091077299040.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-24dmaengine: break out channel registrationDave Jiang1-54/+81
In preparation for dynamic channel registration, the code segment that does the channel registration is broken out to its own function. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/157965022778.73301.8929944324898985438.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: Remove dma_device_satisfies_mask() wrapperGeert Uytterhoeven1-6/+3
Commit aa1e6f1a385eb2b0 ("dmaengine: kill struct dma_client and supporting infrastructure") removed the last user of the dma_device_satisfies_mask() wrapper. Remove the wrapper, and rename __dma_device_satisfies_mask() to dma_device_satisfies_mask(), to get rid of one more function starting with a double underscore. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200121093311.28639-2-geert+renesas@glider.be Signed-off-by: Vinod Koul <vkoul@kernel.org>
2020-01-21dmaengine: Add metadata_ops for dma_async_tx_descriptorPeter Ujfalusi1-0/+73
The metadata is best described as side band data or parameters traveling alongside the data DMAd by the DMA engine. It is data which is understood by the peripheral and the peripheral driver only, the DMA engine see it only as data block and it is not interpreting it in any way. The metadata can be different per descriptor as it is a parameter for the data being transferred. If the DMA supports per descriptor metadata it can implement the attach, get_ptr/set_len callbacks. Client drivers must only use either attach or get_ptr/set_len to avoid misconfiguration. Client driver can check if a given metadata mode is supported by the channel during probe time with dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_CLIENT); dmaengine_is_metadata_mode_supported(chan, DESC_METADATA_ENGINE); and based on this information can use either mode. Wrappers are also added for the metadata_ops. To be used in DESC_METADATA_CLIENT mode: dmaengine_desc_attach_metadata() To be used in DESC_METADATA_ENGINE mode: dmaengine_desc_get_metadata_ptr() dmaengine_desc_set_metadata_len() Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Tero Kristo <t-kristo@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20191223110458.30766-5-peter.ujfalusi@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: print more meaningful error messageVinod Koul1-1/+1
error log for dma_channel_table_init() failure pointed a mere "initialization failure", which is not very helpful message, so print additional details like function name and error code. Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-26dmaengine: move module_/dma_device_put() after route freeVinod Koul1-3/+3
We call dma_device_put() and module_put() after invoking .device_free_chan_resources callback, but we should also take care of router devices and invoke this after .route_free callback. So move it after .route_free Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Add reference counting to dma_device structLogan Gunthorpe1-8/+49
Adding a reference count helps drivers to properly implement the unbind while in use case. References are taken and put every time a channel is allocated or freed. Once the final reference is put, the device is removed from the dma_device_list and a release callback function is called to signal the driver to free the memory. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-5-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Move dma_channel_rebalance() infrastructure up in codeLogan Gunthorpe1-144/+144
So it can be called by a release function which is needed higher up in the code. No functional changes intended. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-4-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Call module_put() after device_free_chan_resources()Logan Gunthorpe1-1/+2
The module reference is taken to ensure the callbacks still exist when they are called. If the channel holds the last reference to the module, the module can disappear before device_free_chan_resources() is called and would cause a call into free'd memory. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-3-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-12-24dmaengine: Store module owner in dma_device structLogan Gunthorpe1-1/+3
dma_chan_to_owner() dereferences the driver from the struct device to obtain the owner and call module_[get|put](). However, if the backing device is unbound before the dma_device is unregistered, the driver will be cleared and this will cause a NULL pointer dereference. Instead, store a pointer to the owner module in the dma_device struct so the module reference can be properly put when the channel is put, even if the backing device was destroyed first. This change helps to support a safer unbind of DMA engines. If the dma_device is unregistered in the driver's remove function, there's no guarantee that there are no existing clients and a users action may trigger the WARN_ONCE in dma_async_device_unregister() which is unlikely to leave the system in a consistent state. Instead, a better approach is to allow the backing driver to go away and fail any subsequent requests to it. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Link: https://lore.kernel.org/r/20191216190120.21374-2-logang@deltatee.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-17Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds1-4/+10
Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...
2019-06-10dmaengine: Grammar s/the its/its/, s/need/needs/Geert Uytterhoeven1-2/+2
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-27dmaengine: Add matching device node validation in __dma_request_channel()Baolin Wang1-2/+8
When user try to request one DMA channel by __dma_request_channel(), it won't validate if it is the correct DMA device to request, that will lead each DMA engine driver to validate the correct device node in their filter function if it is necessary. Thus we can add the matching device node validation in the DMA engine core, to remove all of device node validation in the drivers. Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-05-21treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7Thomas Gleixner1-13/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details the full gnu general public license is included in this distribution in the file called copying extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 9 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Jilayne Lovejoy <opensource@jilayne.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190519154041.244154651@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mm: replace all open encodings for NUMA_NO_NODEAnshuman Khandual1-1/+3
Patch series "Replace all open encodings for NUMA_NO_NODE", v3. All these places for replacement were found by running the following grep patterns on the entire kernel code. Please let me know if this might have missed some instances. This might also have replaced some false positives. I will appreciate suggestions, inputs and review. 1. git grep "nid == -1" 2. git grep "node == -1" 3. git grep "nid = -1" 4. git grep "node = -1" This patch (of 2): At present there are multiple places where invalid node number is encoded as -1. Even though implicitly understood it is always better to have macros in there. Replace these open encodings for an invalid node number with the global macro NUMA_NO_NODE. This helps remove NUMA related assumptions like 'invalid node' from various places redirecting them to a common definition. Link: http://lkml.kernel.org/r/1545127933-10711-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [ixgbe] Acked-by: Jens Axboe <axboe@kernel.dk> [mtip32xx] Acked-by: Vinod Koul <vkoul@kernel.org> [dmaengine.c] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by: Doug Ledford <dledford@redhat.com> [drivers/infiniband] Cc: Joseph Qi <jiangqi903@gmail.com> Cc: Hans Verkuil <hverkuil@xs4all.nl> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-26Merge branch 'ida-4.19' of git://git.infradead.org/users/willy/linux-daxLinus Torvalds1-16/+7
Pull IDA updates from Matthew Wilcox: "A better IDA API: id = ida_alloc(ida, GFP_xxx); ida_free(ida, id); rather than the cumbersome ida_simple_get(), ida_simple_remove(). The new IDA API is similar to ida_simple_get() but better named. The internal restructuring of the IDA code removes the bitmap preallocation nonsense. I hope the net -200 lines of code is convincing" * 'ida-4.19' of git://git.infradead.org/users/willy/linux-dax: (29 commits) ida: Change ida_get_new_above to return the id ida: Remove old API test_ida: check_ida_destroy and check_ida_alloc test_ida: Convert check_ida_conv to new API test_ida: Move ida_check_max test_ida: Move ida_check_leaf idr-test: Convert ida_check_nomem to new API ida: Start new test_ida module target/iscsi: Allocate session IDs from an IDA iscsi target: fix session creation failure handling drm/vmwgfx: Convert to new IDA API dmaengine: Convert to new IDA API ppc: Convert vas ID allocation to new IDA API media: Convert entity ID allocation to new IDA API ppc: Convert mmu context allocation to new IDA API Convert net_namespace to new IDA API cb710: Convert to new IDA API rsxx: Convert to new IDA API osd: Convert to new IDA API sd: Convert to new IDA API ...
2018-08-21dmaengine: Convert to new IDA APIMatthew Wilcox1-16/+7
Simpler and shorter code. Signed-off-by: Matthew Wilcox <willy@infradead.org> Acked-by: Vinod Koul <vkoul@kernel.org>
2018-07-30dmaengine: add a new helper dmaenginem_async_device_registerHuang Shijie1-0/+35
This patch adds the dmaenginem_async_device_register for DMA code. Use the Devres to call the release for the DMA engine driver. Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-07-25dmaengine: dma_request_chan_by_mask() to handle deferred probingPeter Ujfalusi1-2/+8
If there are no DMA devices registered yet, return with EPROBE_DEFER similarly to the case when requesting a slave channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-07-09dmaengine: add support for reporting pause and resume separatelyMarek Szyprowski1-6/+2
'cmd_pause' DMA channel capability means that respective DMA engine supports both pausing and resuming given DMA channel. However, in some cases it is important to know if DMA channel can be paused without the need to resume it. This is a typical requirement for proper residue reading on transfer timeout in UART drivers. There are also some DMA engines with limited hardware, which doesn't really support resuming. Reporting pause and resume capabilities separately allows UART drivers to properly check for the really required capabilities and operate in DMA mode also in systems with limited DMA hardware. On the other hand drivers, which rely on full channel suspend/resume support, should now check for both 'pause' and 'resume' features. Existing clients of dma_get_slave_caps() have been checked and the only driver which rely on proper channel resuming is soc-generic-dmaengine-pcm driver, which has been updated to check the newly added capability. Existing 'cmd_pause' now only indicates that DMA engine support pausing given DMA channel. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2018-06-15fix a series of Documentation/ broken file name referencesMauro Carvalho Chehab1-1/+1
As files move around, their previous links break. Fix the references for them. Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2017-08-28dmaengine: remove BUG_ON while registering devicesVinod Koul1-22/+79
DMAengine core has BUG_ON to check for mandatory operations and ones based on capabilities, but they use BUG_ON, so remove and move to error returns and logging the errors gracefully Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-22dmaengine: remove DMA_SG as it is dead code in kernelDave Jiang1-2/+0
There are no in kernel consumers for DMA_SG op. Removing operation, dead code, and test code in dmatest. Signed-off-by: Dave Jiang <dave.jiang@intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Gary Hook <gary.hook@amd.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Kedareswara rao Appana <appana.durga.rao@xilinx.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-03-14dmaengine: Fix array index out of bounds warning in __get_unmap_pool()Matthias Kaehlcke1-0/+2
This fixes the following warning when building with clang and CONFIG_DMA_ENGINE_RAID=n : drivers/dma/dmaengine.c:1102:11: error: array index 2 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds] return &unmap_pool[2]; ^ ~ drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here static struct dmaengine_unmap_pool unmap_pool[] = { ^ drivers/dma/dmaengine.c:1104:11: error: array index 3 is past the end of the array (which contains 1 element) [-Werror,-Warray-bounds] return &unmap_pool[3]; ^ ~ drivers/dma/dmaengine.c:1083:1: note: array 'unmap_pool' declared here static struct dmaengine_unmap_pool unmap_pool[] = { Signed-off-by: Matthias Kaehlcke <mka@chromium.org> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-02dmaengine: Convert ID allocation to an IDAMatthew Wilcox1-10/+11
dmaengine currently uses an IDR to allocate DMA IDs, but it only needs to know whether IDs are in use or not; the ID to pointer functionality of the IDR is unused. That means it can use the more space-efficient IDA. Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-08-22dmaengine: device must have at least one channelViresh Kumar1-0/+7
The DMA device can't be registered if it doesn't have any channels registered at all. Moreover, it leads to memory leak and is reported by kmemleak as (on 3.10 kernel, and same shall happen on mainline): unreferenced object 0xffffffc09e597240 (size 64): comm "swapper/0", pid 1, jiffies 4294877736 (age 7060.280s) hex dump (first 32 bytes): 00 00 00 00 c0 ff ff ff 30 00 00 ff 00 00 00 ff ........0....... 00 00 00 ff 00 00 00 ff 00 00 00 ff 00 00 00 ff ................ backtrace: [<ffffffc0003079ec>] create_object+0x148/0x2a0 [<ffffffc000cc150c>] kmemleak_alloc+0x80/0xbc [<ffffffc000303a7c>] kmem_cache_alloc_trace+0x120/0x1ac [<ffffffc00054771c>] dma_async_device_register+0x160/0x46c [<ffffffc000548958>] foo_probe+0x1a0/0x264 [<ffffffc0005d6658>] platform_drv_probe+0x14/0x20 [<ffffffc0005d50cc>] driver_probe_device+0x160/0x374 [<ffffffc0005d538c>] __driver_attach+0x60/0x90 [<ffffffc0005d3e78>] bus_for_each_dev+0x7c/0xb0 [<ffffffc0005d4a0c>] driver_attach+0x1c/0x28 [<ffffffc0005d459c>] bus_add_driver+0x124/0x248 [<ffffffc0005d59cc>] driver_register+0x90/0x110 [<ffffffc0005d6bf4>] platform_driver_register+0x58/0x64 [<ffffffc00142a70c>] foo_driver_init+0x10/0x1c [<ffffffc000200878>] do_one_initcall+0xac/0x148 [<ffffffc00140096c>] kernel_init_freeable+0x1a0/0x258 Return -ENODEV from dma_async_device_register() on such a case. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-17Merge branch 'topic/core' into for-linusVinod Koul1-4/+5
2016-05-14dmaengine: core: Use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas1-3/+3
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-12dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLICAndy Shevchenko1-2/+2
When check for capabilities recognize slave support by either DMA_SLAVE or DMA_CYCLIC bit set. If we don't do that the user can't get a normally worked DMA support for engines that doesn't have one of the mentioned bits set. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-13dmaengine: core: Revert back to pr_debug in __dma_request_channel()Jarkko Nikula1-1/+1
Commit ef859312c3a1 ("dmaengine: core: Use dev_ functions for debug and error prints") wasn't quite right in __dma_request_channel() by claiming that all pr_ prints have valid DMA channel pointer. Obviously it is not true as __dma_request_channel() is looking for a channel and returns NULL if it does not find it. Prevent this potential NULL pointer dereference by reverting back to pr_debug(). Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-05dmaengine: add DMA_CYCLIC to dma_get_slave_capsVinod Koul1-1/+2
dma_get_slave_caps() API only checked for slave capability where we use slave capabilities for cyclic dma operations as well, so we should add the cyclic case here too. Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-04dmaengine: core: Use dev_ functions for debug and error printsJarkko Nikula1-13/+17
According to dmaengine kerneldoc the struct dma_chan has always a non-NULL pointer to DMA device and a test in dma_async_device_register() validates that DMA device must also point to struct device. All pr_ prints except one in dma_channel_table_init() have valid DMA channel or DMA device pointer available which allow convert them to use dev_ functions and thus able to show the associated DMA device. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-02-09dmaengine: core: expose max burst capability to clientsShawn Lin1-0/+1
This patch add max_burst to dma_get_slave_caps for clients to get the burst capability of slave dma controller. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-01-06Merge branch 'topic/async' into for-linusVinod Koul1-1/+4
2016-01-06Merge branch 'topic/univ_api' into for-linusVinod Koul1-52/+120