summaryrefslogtreecommitdiff
path: root/drivers/dma/at_hdmac_regs.h
AgeCommit message (Collapse)AuthorFilesLines
2013-12-12dmaengine: at_hdmac: remove unused functionOlof Johansson1-4/+0
commit 54f8d501e8428 ('dmaengine: remove DMA unmap from drivers') refactored some code which resulted in an unused function in the at_hdmac driver: drivers/dma/at_hdmac_regs.h:350:23: warning: 'chan2parent' defined but not used [-Wunused-function] Fixes: 54f8d501e8428 ('dmaengine: remove DMA unmap from drivers') Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Vinod Koul <vinod.koul@Intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2013-07-05DMA: AT91: Get residual bytes in dma bufferElen Song1-0/+3
Add support for returning the residue for current transfer cookie by reading the transfered buffer size(BTSIZE) in CTRLA register. For a single buffer cookie, the descriptor length minus BTSIZE can get the residue. For a lli cookie, remain_desc will record remain descriptor length when last descriptor finish, the remain_desc minus BTSIZE can get the current residue. If the cookie has completed successfully, the residue will be zero. If the cookie is in progress, it will be the number of bytes yet to be transferred. If get residue error, the cookie will be turn into error status. Check dma fifo to see if data remain, let issue pending finish remain work if there is. Signed-off-by: Elen Song <elen.song@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-07-05DMA: AT91: Get transfer widthElen Song1-0/+2
In one dma transfer, the data transfer width can be configured and it is limited by source or destination peripheral width, tx_width will save the transfer width, but for memcpy, either source or destination transfer width is taken as tx_width. Signed-off-by: Elen Song <elen.song@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-30at_hdmac: move to generic DMA bindingLudovic Desroches1-0/+4
Update at_hdmac driver to support generic DMA device tree binding. Devices can still request channel with dma_request_channel() then it doesn't break DMA for non DT boards. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-01-07dma: Convert dev_printk(KERN_<LEVEL> to dev_<level>(Joe Perches1-4/+4
dev_<level> calls take less code than dev_printk(KERN_<LEVEL> and reducing object size is good. Coalesce formats for easier grep. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-09-14ARM: at91: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the at91 include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Dan Williams <djbw@fb.com>
2012-05-15dmaengine: at_hdmac: take maxburst from slave configurationNicolas Ferre1-1/+20
The maxburst/chunk size was taken from the private slave DMA data structure. Use the common API provided by DMA_SLAVE_CONFIG to setup src/dst maxburst values. The ctrla field is not needed anymore in the slave private structure nor the header constants that were located in an architecture specific directory. The at91sam9g45_devices.c file that was using this platform data is also modified to remove this now useless data. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-21dmaengine: at_hdmac: add slave config operationNicolas Ferre1-0/+32
This patch introduces DMA_SLAVE_CONFIG to at_hdmac Atmel DMA driver. It is needed to fix a regression in the use of atmel-mci.c driver on Atmel AT91 platforms brouth by e2b35f3: "dmaengine/dw_dmac: Fix dw_dmac user drivers to adapt to slave_config changes" We remove some parts of the private structure "at_dma_slave" and use the information provided by "struct dma_slave_config": source/destination peripheral registers and access width. AT_DMA_SLAVE_WIDTH_* values used previously are not needed anymore as we now use the standard ones. Although some conversion functions are needed to match register expected values. Some AT91 sub-architecture specific files are slightly touched by this patch but it cannot be split because it can break compilation. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-13dmaengine: move last completed cookie into generic dma_chan structureRussell King - ARM Linux1-2/+0
Every DMA engine implementation declares a last completed dma cookie in their private dma channel structures. This is pointless, and forces driver specific code. Move this out into the common dma_chan structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> [imx-sdma.c & mxs-dma.c] Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31at_hdmac: bugfix for enabling channel irqNikolaus Voss1-9/+8
commit 463894705e4089d0ff69e7d877312d496ac70e5b deleted redundant chan_id and chancnt initialization in dma drivers as this is done in dma_async_device_register(). However, atc_enable_irq() relied on chan_id set before registering the device, what left only channel 0 functional for this driver. This patch introduces atc_enable/disable_chan_irq() as a variant of atc_enable/disable_irq() with the channel as explicit argument. Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-28dmaengine: at_hdmac: simplify device selection from platform data or DTNicolas Ferre1-7/+0
Using a configuration structure simplify the finding of SoC dependent parameters. Both platform data and device tree ids are using these structures. This will separate data from code and remove the need for an enum. Idea from Grant Likely. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-11-10dmaengine: at_hdmac: platform data move to use .id_tableNicolas Ferre1-0/+8
We remove the use of platform data from DMA controller driver. We now use of .id_table to distinguish between compatible types. The two implementations allow to determine the number of channels and the capabilities of the controller. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-08-19dmaengine: at_hdmac: add wrappers for testing channel stateNicolas Ferre1-0/+17
Cyclic property and paused state are encoded as bits in the channel status bitfield. Tests of those bits are wrapped in convenient helper functions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-08-19dmaengine: at_hdmac: improve power management routinesNicolas Ferre1-0/+7
Save/restore dma controller state across a suspend-resume sequence. The prepare() function will wait for the non-cyclic channels to become idle. It also deals with cyclic operations with the start at next period while resuming. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-09dmaengine: at_hdmac: implement pause and resume in atc_controlNicolas Ferre1-0/+1
Pause and resume controls are useful for audio devices. This also returns correct status from atc_tx_status() in case chan is paused. Idea from dw_dmac patch by Linus Walleij. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: specialize AHB interfaces to optimize transfersNicolas Ferre1-0/+4
DMA controller has two AHB interfaces on the SOC internal matrix. It is more efficient to specialize each interface as the access to memory can introduce latencies that are not compatible with peripheral accesses requirements. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: add cyclic DMA operation supportNicolas Ferre1-2/+12
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-05-02dmaengine: at_hdmac: modify way to use interruptsNicolas Ferre1-3/+8
Now we use Buffer Transfer Completed interrupts. If we want a chained buffer completed information, we setup the ATC_IEN bit in CTRLB register in the lli. This is done by set_desc_eol() function and used by memcpy/slave_sg functions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2009-09-08at_hdmac: implement a private tx_listDan Williams1-0/+1
Drop at_hdmac's use of tx_list from struct dma_async_tx_descriptor in preparation for removal of this field. Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-22dmaengine: at_hdmac: add DMA slave transfersNicolas Ferre1-41/+8
This patch for at_hdmac adds the slave transfers capability to the Atmel DMA controller available on some AT91 SOCs. This allow peripheral to memory and memory to peripheral transfers with hardware handshaking. Slave structure for controller specific information is passed through channel private data. This at_dma_slave structure is defined in at_hdmac.h header file and relative hardware definition are moved to this file from at_hdmac_regs.h. Doing this we allow the channel configuration from platform definition code. This work is intensively based on dw_dmac and several slave implementations. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-22dmaengine: at_hdmac: new driver for the Atmel AHB DMA ControllerNicolas Ferre1-0/+386
This AHB DMA Controller (aka HDMA or DMAC on AT91 systems) is availlable on at91sam9rl chip. It will be used on other products in the future. This first release covers only the memory-to-memory tranfer type. This is the only tranfer type supported by this chip. On other products, it will be used also for peripheral DMA transfer (slave API support to come). I used dmatest client without problem in different configurations to test it. Full documentation for this controller can be found in the SAM9RL datasheet: http://www.atmel.com/dyn/products/product_card.asp?part_id=4243 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>