| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is a typo in the message. The clock name should be 'pclk_ddr_mon'.
Fix it.
While at it, switch to dev_err_probe() which is less verbose, filters
-EPROBE_DEFER, and log the error code in a human readable way.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
If the regulator_get_optional() call for the SRAM regulator returns
a probe deferral, we must bail out and retry probing later: failing
to do this will produce unstabilities on platforms requiring the
handling for this regulator.
Fixes: b615b00c42da ("PM / devfreq: mediatek: Introduce MediaTek CCI devfreq driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are ARM cpufreq updates and operating performance points (OPP)
updates plus one cpuidle update adding a new trace point.
Specifics:
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
- Minor cleanups and support for new boards for Qcom cpufreq drivers
(Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
- Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
- Make dev_pm_opp_set_regulators() accept NULL terminated list
(Viresh Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other users and
helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they
are still in use (Liang He).
- Minor OPP cleanups (Viresh Kumar and Yang Li).
- Add a trace event for cpuidle to track missed (too deep or too
shallow) wakeups (Kajetan Puchalski)"
* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
cpuidle: Add cpu_idle_miss trace event
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
dt-bindings: opp: Add msm8939 to the compatible list
dt-bindings: opp: Add missing compat devices
dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
cpufreq: Change order of online() CB and policy->cpus modification
cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
cpufreq: qcom-hw: Disable LMH irq when disabling policy
cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the large set of char and misc and other driver subsystem
changes for 6.0-rc1.
Highlights include:
- large set of IIO driver updates, additions, and cleanups
- new habanalabs device support added (loads of register maps much
like GPUs have)
- soundwire driver updates
- phy driver updates
- slimbus driver updates
- tiny virt driver fixes and updates
- misc driver fixes and updates
- interconnect driver updates
- hwtracing driver updates
- fpga driver updates
- extcon driver updates
- firmware driver updates
- counter driver update
- mhi driver fixes and updates
- binder driver fixes and updates
- speakup driver fixes
All of these have been in linux-next for a while without any reported
problems"
* tag 'char-misc-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (634 commits)
drivers: lkdtm: fix clang -Wformat warning
char: remove VR41XX related char driver
misc: Mark MICROCODE_MINOR unused
spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
dt-bindings: iio: adc: Add compatible for MT8188
iio: light: isl29028: Fix the warning in isl29028_remove()
iio: accel: sca3300: Extend the trigger buffer from 16 to 32 bytes
iio: fix iio_format_avail_range() printing for none IIO_VAL_INT
iio: adc: max1027: unlock on error path in max1027_read_single_value()
iio: proximity: sx9324: add empty line in front of bullet list
iio: magnetometer: hmc5843: Remove duplicate 'the'
iio: magn: yas530: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: magnetometer: ak8974: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: veml6030: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4035: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: vcnl4000: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
iio: light: tsl2591: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: tsl2583: Use DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
iio: light: isl29028: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: light: gp2ap002: Switch to DEFINE_RUNTIME_DEV_PM_OPS and pm_ptr()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) updates for 5.20-rc1 from Viresh
Kumar:
"- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
Kumar).
- Add dev_pm_opp_set_config() and friends and migrate other
users/helpers to using them (Viresh Kumar).
- Add support for multiple clocks for a device (Viresh Kumar and
Krzysztof Kozlowski).
- Configure resources before adding OPP table for Venus (Stanimir
Varbanov).
- Keep reference count up for opp->np and opp_table->np while they are
still in use (Liang He).
- Minor cleanups (Viresh Kumar and Yang Li)."
* tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (43 commits)
venus: pm_helpers: Fix warning in OPP during probe
OPP: Don't drop opp->np reference while it is still in use
OPP: Don't drop opp_table->np reference while it is still in use
OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
PM / devfreq: tegra30: Register config_clks helper
OPP: Allow config_clks helper for single clk case
OPP: Provide a simple implementation to configure multiple clocks
OPP: Assert clk_count == 1 for single clk helpers
OPP: Add key specific assert() method to key finding helpers
OPP: Compare bandwidths for all paths in _opp_compare_key()
OPP: Allow multiple clocks for a device
dt-bindings: opp: accept array of frequencies
OPP: Make dev_pm_opp_set_opp() independent of frequency
OPP: Reuse _opp_compare_key() in _opp_add_static_v2()
OPP: Remove rate_not_available parameter to _opp_add()
OPP: Use consistent names for OPP table instances
OPP: Use generic key finding helpers for bandwidth key
OPP: Use generic key finding helpers for level key
OPP: Add generic key finding helpers and use them for freq APIs
OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 5.20
Here are the interconnect changes for the 5.20-rc1 merge window consisting
of two new drivers, misc driver improvements and new device managed API.
Core change:
- Add device managed bulk API
Driver changes:
- New driver for NXP i.MX8MP platforms
- New driver for Qualcomm SM6350 platforms
- Multiple bucket support for Qualcomm RPM-based drivers.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.20-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
PM / devfreq: imx: Register i.MX8MP interconnect device
interconnect: imx: Add platform driver for imx8mp
interconnect: imx: configure NoC mode/prioriry/ext_control
interconnect: imx: introduce imx_icc_provider
interconnect: imx: set src node
interconnect: imx: fix max_node_id
interconnect: qcom: icc-rpm: Set bandwidth and clock for bucket values
interconnect: qcom: icc-rpm: Support multiple buckets
interconnect: qcom: icc-rpm: Change to use qcom_icc_xlate_extended()
interconnect: qcom: Move qcom_icc_xlate_extended() to a common file
dt-bindings: interconnect: Update property for icc-rpm path tag
interconnect: icc-rpm: Set destination bandwidth as well as source bandwidth
interconnect: qcom: msm8939: Use icc_sync_state
interconnect: add device managed bulk API
dt-bindings: interconnect: add fsl,imx8mp.h
dt-bindings: interconnect: imx8m: Add bindings for imx8mp noc
interconnect: qcom: Add SM6350 driver support
dt-bindings: interconnect: Add Qualcomm SM6350 NoC support
dt-bindings: interconnect: qcom: Split out rpmh-common bindings
interconnect: qcom: icc-rpmh: Support child NoC device probe
|
|
Same to i.MX8MM/N/Q, register i.MX8MP interconnect device to make
i.MX8MP Interconnect driver work.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20220703091132.1412063-10-peng.fan@oss.nxp.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
|
|
It's difficult to notice that driver failed to probe by looking at KMSG
when devm_devfreq_add_device() fails. Add explicit error message for this
case.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The 3rd argument to the function of_get_property is a pointer and it is
being passed using 0. Use NULL instead.
Cleans up sparse warning:
warning: Using plain integer as NULL pointer
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
There are 4 warnings there:
drivers/devfreq/devfreq.c:707: warning: Function parameter or member 'val' not described in 'qos_min_notifier_call'
drivers/devfreq/devfreq.c:707: warning: Function parameter or member 'ptr' not described in 'qos_min_notifier_call'
drivers/devfreq/devfreq.c:717: warning: Function parameter or member 'val' not described in 'qos_max_notifier_call'
drivers/devfreq/devfreq.c:717: warning: Function parameter or member 'ptr' not described in 'qos_max_notifier_call'
It turns that neither val nor ptr are actually used on those
function, so document as such.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
We introduce a devfreq driver for the MediaTek Cache Coherent Interconnect
(CCI) used by some MediaTek SoCs.
In this driver, we use the passive devfreq driver to get target frequencies
and adjust voltages accordingly. In MT8183 and MT8186, the MediaTek CCI
is supplied by the same regulators with the little core CPUs.
Signed-off-by: Jia-Wei Chang <jia-wei.chang@mediatek.com>
Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
There is a corner case with Tegra30, where we want to skip clk
configuration that happens via dev_pm_opp_set_opp(), but still want the
OPP core to read the "opp-hz" property so we can find the right OPP via
freq finding helpers.
The OPP core provides support for the platforms to provide config_clks
helpers now, lets use that instead of devm_pm_opp_of_add_table_noclk()
to achieve the same result, as the OPP core won't parse the DT's
"opp-hz" property anymore if the clock isn't provided.
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Now that we have a central API to handle all OPP table configurations,
migrate the set-regulators family of helpers to use the new
infrastructure.
The return type and parameter to the APIs change a bit due to this,
update the current users as well in the same commit in order to avoid
breaking builds.
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Make dev_pm_opp_set_regulators() accept a NULL terminated list of names
instead of making the callers keep the two parameters in sync, which
creates an opportunity for bugs to get in.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Steven Price <steven.price@arm.com> # panfrost
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Fix exynos-bus NULL pointer dereference by correctly using the local
generated freq_table to output the debug values instead of using the
profile freq_table that is not used in the driver.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: b5d281f6c16d ("PM / devfreq: Rework freq_table to be local to devfreq struct")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Commit 26984d9d581e ("PM / devfreq: passive: Keep cpufreq_policy for
possible cpus") reworked governor_passive.c, and accidently added a
tab in the first line, i.e., the SPDX-License-Identifier line.
The checkpatch script warns with the SPDX_LICENSE_TAG warning, and hence
pointed this issue out while investigating checkpatch warnings.
Revert this editing accident. No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Remove cpufreq_passive_unregister_notifier from
cpufreq_passive_register_notifier in case of error as devfreq core
already call unregister on GOV_START fail.
This fix the kernel always printing a WARN on governor PROBE_DEFER as
cpufreq_passive_unregister_notifier is called two times and return
error on the second call as the cpufreq is already unregistered.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
On a devfreq PROBE_DEFER, the freq_table in the driver profile struct,
is never reset and may be leaved in an undefined state.
This comes from the fact that we store the freq_table in the driver
profile struct that is commonly defined as static and not reset on
PROBE_DEFER.
We currently skip the reinit of the freq_table if we found
it's already defined since a driver may declare his own freq_table.
This logic is flawed in the case devfreq core generate a freq_table, set
it in the profile struct and then PROBE_DEFER, freeing the freq_table.
In this case devfreq will found a NOT NULL freq_table that has been
freed, skip the freq_table generation and probe the driver based on the
wrong table.
To fix this and correctly handle PROBE_DEFER, use a local freq_table and
max_state in the devfreq struct and never modify the freq_table present
in the profile struct if it does provide it.
Fixes: 0ec09ac2cebe ("PM / devfreq: Set the freq_table of devfreq device")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
This function only calls of_node_put() in normal path,
missing it in error paths.
Add missing of_node_put() to avoid refcount leak.
Fixes: f262f28c1470 ("PM / devfreq: event: Add devfreq_event class")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
HZ macros has been centralized in units.h since [1]. Use it to avoid
duplicated definition.
[1] commit e2c77032fcbe ("units: add the HZ macros")
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
With the passive governor, the cpu based scaling can PROBE_DEFER due to
the fact that CPU policy are not ready.
The cpufreq passive unregister notifier is called both from the
GOV_START errors and for the GOV_STOP and assume the notifier is
successfully registred every time. With GOV_START failing it's wrong to
loop over each possible CPU since the register path has failed for
some CPU policy not ready. Change the logic and unregister the notifer
based on the current allocated parent_cpu_data list to correctly handle
errors and the governor unregister path.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Don't print warning when a governor PROBE_DEFER as it's not a real
GOV_START fail.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The cpufreq passive register notifier can PROBE_DEFER and the devfreq
struct is freed and then reallocaed on probe retry.
The current logic assume that the code can't PROBE_DEFER so the devfreq
struct in the this variable in devfreq_passive_data is assumed to be
(if already set) always correct.
This cause kernel panic as the code try to access the wrong address.
To correctly handle this, update the this variable in
devfreq_passive_data to the devfreq reallocated struct.
Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Each devfreq governor specifies the supported governor event
such as GOV_START and GOV_STOP. When not-supported event is required,
just return non-error. But, commit ce9a0d88d97a ("PM / devfreq: Add
cpu based scaling support to passive governor") returned the error
value. So that return non-error value when not-supported event is required.
Fixes: ce9a0d88d97a ("PM / devfreq: Add cpu based scaling support to passive governor")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The passive governor requires the cpu data to get the next target frequency
of devfreq device if depending on cpu. In order to reduce the unnecessary
memory data, keep cpufreq_policy data for possible cpus instead of NR_CPU.
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Johnson Wang <johnson.wang@mediatek.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
In order to keep the consistent coding style between passive_devfreq
and passive_cpufreq, use common code for handling required opp property.
Also remove the unneed conditional statement and unify the comment
of both passive_devfreq and passive_cpufreq when getting the target frequency.
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Johnson Wang <johnson.wang@mediatek.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Many CPU architectures have caches that can scale independent of the
CPUs. Frequency scaling of the caches is necessary to make sure that the
cache is not a performance bottleneck that leads to poor performance and
power. The same idea applies for RAM/DDR.
To achieve this, this patch adds support for cpu based scaling to the
passive governor. This is accomplished by taking the current frequency
of each CPU frequency domain and then adjust the frequency of the cache
(or any devfreq device) based on the frequency of the CPUs. It listens
to CPU frequency transition notifiers to keep itself up to date on the
current CPU frequency.
To decide the frequency of the device, the governor does one of the
following:
* Derives the optimal devfreq device opp from required-opps property of
the parent cpu opp_table.
* Scales the device frequency in proportion to the CPU frequency. So, if
the CPUs are running at their max frequency, the device runs at its
max frequency. If the CPUs are running at their min frequency, the
device runs at its min frequency. It is interpolated for frequencies
in between.
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Johnson Wang <johnson.wang@mediatek.com>
Signed-off-by: Saravana Kannan <skannan@codeaurora.org>
[Sibi: Integrated cpu-freqmap governor into passive_governor]
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
[Chanwoo: Fix conflict with latest code and cleanup code]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
In order to get frequency range within devfreq governors,
export devfreq_get_freq_range symbol within devfreq.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Johnson Wang <johnson.wang@mediatek.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
See the previous patch ("soc: rockchip: power-domain: Manage resource
conflicts with firmware") for a thorough explanation of the conflicts.
While ARM Trusted Firmware may be modifying memory controller and
power-domain states, we need to block the kernel's power-domain driver.
If the power-domain driver is disabled, there is no resource conflict
and this becomes a no-op.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This static struct can get reused if the device gets removed/reprobed,
and that causes use-after-free in its ->freq_table.
Let's just move the struct to our dynamic allocation.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This simplifies error-cleanup and remove().
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Otherwise we hit an unablanced enable-count when unbinding the DFI
device:
[ 1279.659119] ------------[ cut here ]------------
[ 1279.659179] WARNING: CPU: 2 PID: 5638 at drivers/devfreq/devfreq-event.c:360 devfreq_event_remove_edev+0x84/0x8c
...
[ 1279.659352] Hardware name: Google Kevin (DT)
[ 1279.659363] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
[ 1279.659371] pc : devfreq_event_remove_edev+0x84/0x8c
[ 1279.659380] lr : devm_devfreq_event_release+0x1c/0x28
...
[ 1279.659571] Call trace:
[ 1279.659582] devfreq_event_remove_edev+0x84/0x8c
[ 1279.659590] devm_devfreq_event_release+0x1c/0x28
[ 1279.659602] release_nodes+0x1cc/0x244
[ 1279.659611] devres_release_all+0x44/0x60
[ 1279.659621] device_release_driver_internal+0x11c/0x1ac
[ 1279.659629] device_driver_detach+0x20/0x2c
[ 1279.659641] unbind_store+0x7c/0xb0
[ 1279.659650] drv_attr_store+0x2c/0x40
[ 1279.659663] sysfs_kf_write+0x44/0x58
[ 1279.659672] kernfs_fop_write_iter+0xf4/0x190
[ 1279.659684] vfs_write+0x2b0/0x2e4
[ 1279.659693] ksys_write+0x80/0xec
[ 1279.659701] __arm64_sys_write+0x24/0x30
[ 1279.659714] el0_svc_common+0xf0/0x1d8
[ 1279.659724] do_el0_svc_compat+0x28/0x3c
[ 1279.659738] el0_svc_compat+0x10/0x1c
[ 1279.659746] el0_sync_compat_handler+0xa8/0xcc
[ 1279.659758] el0_sync_compat+0x188/0x1c0
[ 1279.659768] ---[ end trace cec200e5094155b4 ]---
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
We want to keep the idle time fixed, so compute based on the current DDR
frequency.
The old properties were deprecated and never used, so we can safely drop
them from the driver.
This is a rewritten version of work by Lin Huang <hl@rock-chips.com>.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Implement the newly-defined properties to allow disabling certain
power-saving-at-idle features at higher frequencies.
This is a rewritten version of work by Lin Huang <hl@rock-chips.com>.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
We're going to add new usages, and it's cleaner to work with macros
instead of comments and magic numbers.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
All of these properties are initialized by ARM Trusted Firmware, and
have been since the early days of this chip. It's redundant (and
possibly wrong) to do this here now. What's more, there seems to be some
confusion about the units and some of the definitions of this timing
struct: the DT docs say MHz for many of these, but downstream users were
in Hz (and therefore, the ATF interface was Hz). Also, the in-driver
usage for some of these (e.g., for comparing to target frequency) were
in Hz too. So doubly wrong.
We can avoid thinking about who got the right units by dropping the
unnecessary code and properties. They are marked deprecated in the
binding schema.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
These properties are:
* undocumented
* directly representing software properties, not hardware properties
* unused (no in-tree users, yet; this IP block has so far only been used
in downstream kernels)
Let's just stick the values that downstream users have been using
directly in the driver and call it a day.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Suppose devfreq_update_status() failure in devfreq_set_target() is not a
critical error, reduces the log severity.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Compile-testing the driver without CONFIG_COMMON_CLK causes
a link failure:
arm-linux-gnueabi-ld: drivers/devfreq/sun8i-a33-mbus.o: in function `sun8i_a33_mbus_remove':
sun8i-a33-mbus.c:(.text+0x450): undefined reference to `clk_rate_exclusive_put'
arm-linux-gnueabi-ld: sun8i-a33-mbus.c:(.text+0x460): undefined reference to `clk_rate_exclusive_put'
arm-linux-gnueabi-ld: drivers/devfreq/sun8i-a33-mbus.o: in function `sun8i_a33_mbus_probe':
sun8i-a33-mbus.c:(.text+0x85c): undefined reference to `clk_rate_exclusive_get'
arm-linux-gnueabi-ld: sun8i-a33-mbus.c:(.text+0x878): undefined reference to `clk_rate_exclusive_get'
Fixes: 8bfd4858b4bb ("PM / devfreq: Add a driver for the sun8i/sun50i MBUS")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
This driver works by adjusting the divider on the DRAM controller's
module clock. Thus there is no fixed set of OPPs, only "full speed" down
to "quarter speed" (or whatever the maximum divider is on that variant).
It makes use of the MDFS hardware in the MBUS, in "DFS" mode, which
takes care of updating registers during the critical section while DRAM
is inaccessible.
This driver should support several sunxi SoCs, starting with the A33,
which have a DesignWare DDR3 controller with merged PHY register space
and the matching MBUS register layout (so not A63 or later). However,
the driver has only been tested on the A64/H5, so those are the only
compatibles enabled for now.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Merge operating performance points (OPP) framework updates for and
intel_pstate driver fixes for 5.16-rc1.
* pm-opp:
dt-bindings: opp: Allow multi-worded OPP entry name
opp: Fix return in _opp_add_static_v2()
PM / devfreq: tegra30: Check whether clk_round_rate() returns zero rate
PM / devfreq: tegra30: Use resource-managed helpers
PM / devfreq: Add devm_devfreq_add_governor()
opp: Add more resource-managed variants of dev_pm_opp_of_add_table()
opp: Change type of dev_pm_opp_attach_genpd(names) argument
opp: Fix required-opps phandle array count check
* pm-cpufreq:
cpufreq: intel_pstate: Clear HWP Status during HWP Interrupt enable
cpufreq: intel_pstate: Fix unchecked MSR 0x773 access
cpufreq: intel_pstate: Clear HWP desired on suspend/shutdown and offline
|
|
Since commit ea572f816032 ("PM / devfreq: Change return type of
devfreq_set_freq_table()"), all devfreq devices are expected to have a
valid freq_table. The devfreq core unconditionally dereferences
freq_table in the sysfs code and in get_freq_range().
Therefore, we need to ensure that freq_table is both non-null and
non-empty (length is > 0). If either check fails, replace the table
using set_freq_table() or return the error.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
When parsing devicetree, the function of_get_devfreq_events(), for each
device child node, iterates over array of possible events "ppmu_events"
till it finds one matching by node name. When match is found the
ppmu_events[i] points to element having both the name of the event and
the counters ID.
Each PPMU device child node might have an "event-name" property with the
name of the event, however due to the design of devfreq it must be the
same as the device node name. If it is not the same, the devfreq client
won't be able to use it via devfreq_event_get_edev_by_phandle().
Since PPMU device child node name must be equal to the "event-name"
property (event-name == ppmu_events[i].name), there is no need to find
the counters ID by the "event-name". Instead use ppmu_events[i].id
which must be equal to it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Devicetree naming convention requires device node names to use hyphens
instead of underscore, so Exynos5422 devfreq event name
"ppmu-event3-dmc0_0" should be "ppmu-event3-dmc0-0". Newly introduced
dtschema enforces this, however the driver still expects old name with
an underscore.
Add new events for Exynos5422 while still accepting old name for
backwards compatibility.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
EMC clock is always-on and can't be zero. Check whether clk_round_rate()
returns zero rate and error out if it does. It can return zero if clock
tree isn't initialized properly.
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Use resource-managed API helpers to simplify driver's probe() function,
making code cleaner.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Add resource-managed variant of devfreq_add_governor().
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
HZ unit conversion macros are available in units.h, use them and remove
the duplicate definition.
The new macro has an unsigned long type.
All the code is dealing with unsigned long and the code using the macro is
doing a coercitive cast to unsigned long.
Link: https://lkml.kernel.org/r/20210816114732.1834145-5-daniel.lezcano@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The 86ad9a24f21e ("PM / devfreq: Add required OPPs support to passive governor")
supported the required-opp property for using devfreq passive governor.
But, 86ad9a24f21e has caused the problem on use-case when required-opp
is not used such as exynos-bus.c devfreq driver. So that fix the
get_target_freq of passive governor for supporting the case of when
required-opp is not used.
Fixes: 86ad9a24f21e ("PM / devfreq: Add required OPPs support to passive governor")
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
Use DEVICE_ATTR_RW helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
