| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull IPMI updates from Corey Minyard:
"A couple of very minor fixes for style and rate limiting.
Nothing big, but probably needs to go in"
* tag 'for-linus-5.15-1' of git://github.com/cminyard/linux-ipmi:
char: ipmi: use DEVICE_ATTR helper macro
ipmi: rate limit ipmi smi_event failure message
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- Fix a kernel crash when a signal is delivered to bad userspace stack
- Fix fall-through warnings in math-emu code
- Increase size of gcc stack frame check
- Switch coding from 'pci_' to 'dma_' API
- Make struct parisc_driver::remove() return void
- Some parisc related Makefile changes
- Minor cleanups, e.g. change to octal permissions, fix macro
collisions, fix PMD_ORDER collision, replace spaces with tabs
* tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: math-emu: Fix fall-through warnings
parisc: fix crash with signals and alloca
parisc: Fix compile failure when building 64-bit kernel natively
parisc: ccio-dma.c: Added tab instead of spaces
parisc/parport_gsc: switch from 'pci_' to 'dma_' API
parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild
parisc: switch from 'pci_' to 'dma_' API
parisc: Make struct parisc_driver::remove() return void
parisc: remove unused arch/parisc/boot/install.sh and its phony target
parisc: Rename PMD_ORDER to PMD_TABLE_ORDER
parisc: math-emu: Avoid "fmt" macro collision
parisc: Increase size of gcc stack frame check
parisc: Replace symbolic permissions with octal permissions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the "big" set of tty/serial driver patches for 5.15-rc1
Nothing major in here at all, just some driver updates and more
cleanups on old tty apis and code that needed it that includes:
- tty.h cleanup of things that didn't belong in it
- other tty cleanups by Jiri
- driver cleanups
- rs485 support added to amba-pl011 driver
- dts updates
- stm32 serial driver updates
- other minor fixes and driver updates
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits)
tty: serial: uartlite: Use read_poll_timeout for a polling loop
tty: serial: uartlite: Use constants in early_uartlite_putc
tty: Fix data race between tiocsti() and flush_to_ldisc()
serial: vt8500: Use of_device_get_match_data
serial: tegra: Use of_device_get_match_data
serial: 8250_ingenic: Use of_device_get_match_data
tty: serial: linflexuart: Remove redundant check to simplify the code
tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp
tty: serial: fsl_lpuart: enable two stop bits for lpuart32
tty: serial: fsl_lpuart: fix the wrong mapbase value
mxser: use semi-colons instead of commas
tty: moxa: use semi-colons instead of commas
tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback
tty: replace in_irq() with in_hardirq()
serial: sh-sci: fix break handling for sysrq
serial: stm32: use devm_platform_get_and_ioremap_resource()
serial: stm32: use the defined variable to simplify code
Revert "arm pl011 serial: support multi-irq request"
tty: serial: samsung: Add Exynos850 SoC data
tty: serial: samsung: Fix driver data macros style
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char/misc driver changes for 5.15-rc1.
Lots of different driver subsystems are being updated in here,
notably:
- mhi subsystem update
- fpga subsystem update
- coresight/hwtracing subsystem update
- interconnect subsystem update
- nvmem subsystem update
- parport drivers update
- phy subsystem update
- soundwire subsystem update
and there are some other char/misc drivers being updated as well:
- binder driver additions
- new misc drivers
- lkdtm driver updates
- mei driver updates
- sram driver updates
- other minor driver updates.
Note, there are no habanalabs driver updates in this pull request,
that will probably come later before -rc1 is out in a different
request.
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (169 commits)
Revert "bus: mhi: Add inbound buffers allocation flag"
misc/pvpanic: fix set driver data
VMCI: fix NULL pointer dereference when unmapping queue pair
char: mware: fix returnvar.cocci warnings
parport: remove non-zero check on count
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
phy: qcom-qmp: Add support for SM6115 UFS phy
dt-bindings: phy: qcom,qmp: Add SM6115 UFS PHY bindings
phy: qmp: Provide unique clock names for DP clocks
lkdtm: remove IDE_CORE_CP crashpoint
lkdtm: replace SCSI_DISPATCH_CMD with SCSI_QUEUE_RQ
coresight: Replace deprecated CPU-hotplug functions.
Documentation: coresight: Add documentation for CoreSight config
coresight: syscfg: Add initial configfs support
coresight: config: Add preloaded configurations
coresight: etm4x: Add complex configuration handlers to etmv4
coresight: etm-perf: Update to activate selected configuration
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Enable memcg accounting for various networking objects.
BPF:
- Introduce bpf timers.
- Add perf link and opaque bpf_cookie which the program can read out
again, to be used in libbpf-based USDT library.
- Add bpf_task_pt_regs() helper to access user space pt_regs in
kprobes, to help user space stack unwinding.
- Add support for UNIX sockets for BPF sockmap.
- Extend BPF iterator support for UNIX domain sockets.
- Allow BPF TCP congestion control progs and bpf iterators to call
bpf_setsockopt(), e.g. to switch to another congestion control
algorithm.
Protocols:
- Support IOAM Pre-allocated Trace with IPv6.
- Support Management Component Transport Protocol.
- bridge: multicast: add vlan support.
- netfilter: add hooks for the SRv6 lightweight tunnel driver.
- tcp:
- enable mid-stream window clamping (by user space or BPF)
- allow data-less, empty-cookie SYN with TFO_SERVER_COOKIE_NOT_REQD
- more accurate DSACK processing for RACK-TLP
- mptcp:
- add full mesh path manager option
- add partial support for MP_FAIL
- improve use of backup subflows
- optimize option processing
- af_unix: add OOB notification support.
- ipv6: add IFLA_INET6_RA_MTU to expose MTU value advertised by the
router.
- mac80211: Target Wake Time support in AP mode.
- can: j1939: extend UAPI to notify about RX status.
Driver APIs:
- Add page frag support in page pool API.
- Many improvements to the DSA (distributed switch) APIs.
- ethtool: extend IRQ coalesce uAPI with timer reset modes.
- devlink: control which auxiliary devices are created.
- Support CAN PHYs via the generic PHY subsystem.
- Proper cross-chip support for tag_8021q.
- Allow TX forwarding for the software bridge data path to be
offloaded to capable devices.
Drivers:
- veth: more flexible channels number configuration.
- openvswitch: introduce per-cpu upcall dispatch.
- Add internet mix (IMIX) mode to pktgen.
- Transparently handle XDP operations in the bonding driver.
- Add LiteETH network driver.
- Renesas (ravb):
- support Gigabit Ethernet IP
- NXP Ethernet switch (sja1105):
- fast aging support
- support for "H" switch topologies
- traffic termination for ports under VLAN-aware bridge
- Intel 1G Ethernet
- support getcrosststamp() with PCIe PTM (Precision Time
Measurement) for better time sync
- support Credit-Based Shaper (CBS) offload, enabling HW traffic
prioritization and bandwidth reservation
- Broadcom Ethernet (bnxt)
- support pulse-per-second output
- support larger Rx rings
- Mellanox Ethernet (mlx5)
- support ethtool RSS contexts and MQPRIO channel mode
- support LAG offload with bridging
- support devlink rate limit API
- support packet sampling on tunnels
- Huawei Ethernet (hns3):
- basic devlink support
- add extended IRQ coalescing support
- report extended link state
- Netronome Ethernet (nfp):
- add conntrack offload support
- Broadcom WiFi (brcmfmac):
- add WPA3 Personal with FT to supported cipher suites
- support 43752 SDIO device
- Intel WiFi (iwlwifi):
- support scanning hidden 6GHz networks
- support for a new hardware family (Bz)
- Xen pv driver:
- harden netfront against malicious backends
- Qualcomm mobile
- ipa: refactor power management and enable automatic suspend
- mhi: move MBIM to WWAN subsystem interfaces
Refactor:
- Ambient BPF run context and cgroup storage cleanup.
- Compat rework for ndo_ioctl.
Old code removal:
- prism54 remove the obsoleted driver, deprecated by the p54 driver.
- wan: remove sbni/granch driver"
* tag 'net-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1715 commits)
net: Add depends on OF_NET for LiteX's LiteETH
ipv6: seg6: remove duplicated include
net: hns3: remove unnecessary spaces
net: hns3: add some required spaces
net: hns3: clean up a type mismatch warning
net: hns3: refine function hns3_set_default_feature()
ipv6: remove duplicated 'net/lwtunnel.h' include
net: w5100: check return value after calling platform_get_resource()
net/mlxbf_gige: Make use of devm_platform_ioremap_resourcexxx()
net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()
net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()
fou: remove sparse errors
ipv4: fix endianness issue in inet_rtm_getroute_build_skb()
octeontx2-af: Set proper errorcode for IPv4 checksum errors
octeontx2-af: Fix static code analyzer reported issues
octeontx2-af: Fix mailbox errors in nix_rss_flowkey_cfg
octeontx2-af: Fix loop in free and unmap counter
af_unix: fix potential NULL deref in unix_dgram_connect()
dpaa2-eth: Replace strlcpy with strscpy
octeontx2-af: Use NDC TX for transmit packet data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Algorithms:
- Add AES-NI/AVX/x86_64 implementation of SM4.
Drivers:
- Add Arm SMCCC TRNG based driver"
[ And obviously a lot of random fixes and updates - Linus]
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (84 commits)
crypto: sha512 - remove imaginary and mystifying clearing of variables
crypto: aesni - xts_crypt() return if walk.nbytes is 0
padata: Remove repeated verbose license text
crypto: ccp - Add support for new CCP/PSP device ID
crypto: x86/sm4 - add AES-NI/AVX2/x86_64 implementation
crypto: x86/sm4 - export reusable AESNI/AVX functions
crypto: rmd320 - remove rmd320 in Makefile
crypto: skcipher - in_irq() cleanup
crypto: hisilicon - check _PS0 and _PR0 method
crypto: hisilicon - change parameter passing of debugfs function
crypto: hisilicon - support runtime PM for accelerator device
crypto: hisilicon - add runtime PM ops
crypto: hisilicon - using 'debugfs_create_file' instead of 'debugfs_create_regset32'
crypto: tcrypt - add GCM/CCM mode test for SM4 algorithm
crypto: testmgr - Add GCM/CCM mode test of SM4 algorithm
crypto: tcrypt - Fix missing return value check
crypto: hisilicon/sec - modify the hardware endian configuration
crypto: hisilicon/sec - fix the abnormal exiting process
crypto: qat - store vf.compatible flag
crypto: qat - do not export adf_iov_putmsg()
...
|
|
The caller of this function (parisc_driver_remove() in
arch/parisc/kernel/drivers.c) ignores the return value, so better don't
return any value at all to not wake wrong expectations in driver authors.
The only function that could return a non-zero value before was
ipmi_parisc_remove() which returns the return value of
ipmi_si_remove_by_dev(). Make this function return void, too, as for all
other callers the value is ignored, too.
Also fold in a small checkpatch fix for:
WARNING: Unnecessary space before function pointer arguments
+ void (*remove) (struct parisc_device *dev);
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> (for drivers/input)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
Remove unneeded variables when "0" can be returned.
Generated by: scripts/coccinelle/misc/returnvar.cocci
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: jing yangyang <jing.yangyang@zte.com.cn>
Link: https://lore.kernel.org/r/20210820021752.10927-1-jing.yangyang@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When rngd is run as root then lots of these types of message will appear
in the kernel log if the TPM has been configured to provide random bytes:
[ 7406.275163] tpm tpm0: tpm_transmit: tpm_recv: error -4
The issue is caused by the following call that is interrupted while
waiting for the TPM's response.
sig = wait_event_interruptible(ibmvtpm->wq, !ibmvtpm->tpm_processing_cmd);
Rather than waiting for the response in the low level driver, have it use
the polling loop in tpm_try_transmit() that uses a command's duration to
poll until a result has been returned by the TPM, thus ending when the
timeout has occurred but not responding to signals and ctrl-c anymore. To
stay in this polling loop extend tpm_ibmvtpm_status() to return
'true' for as long as the vTPM is indicated as being busy in
tpm_processing_cmd. Since the loop requires the TPM's timeouts, get them
now using tpm_get_timeouts() after setting the TPM2 version flag on the
chip.
To recreat the resolved issue start rngd like this:
sudo rngd -r /dev/hwrng -t
sudo rngd -r /dev/tpm0 -t
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1981473
Fixes: 6674ff145eef ("tpm_ibmvtpm: properly handle interrupted packet receptions")
Cc: Nayna Jain <nayna@linux.ibm.com>
Cc: George Wilson <gcwilson@linux.ibm.com>
Reported-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Way back when this driver was written the I2C framework
used to insist an ID table be defined even if the driver
did not use it in favor of ACPI/OF matching, so it was
added just to placate the hard I2C framework requirement.
This is no longer the case so we can drop the table and
also convert the driver to the new probe interface.
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
This fixes a minor bug which went unnoticed during the initial
driver upstreaming review: TCG_CR50 does not exist in mainline
kernels, so remove it.
Fixes: 3a253caaad11 ("char: tpm: add i2c driver for cr50")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
devices menu
Include RANDOM_TRUST_CPU and RANDOM_TRUST_BOOTLOADER inside the
"Character devices" menu so that they are listed (presented)
with other Character devices.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210816000531.17934-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.h
9e26680733d5 ("bnxt_en: Update firmware call to retrieve TX PTP timestamp")
9e518f25802c ("bnxt_en: 1PPS functions to configure TSIO pins")
099fdeda659d ("bnxt_en: Event handler for PPS events")
kernel/bpf/helpers.c
include/linux/bpf-cgroup.h
a2baf4e8bb0f ("bpf: Fix potentially incorrect results with bpf_get_local_storage()")
c7603cfa04e7 ("bpf: Add ambient BPF runtime context stored in current")
drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
5957cc557dc5 ("net/mlx5: Set all field of mlx5_irq before inserting it to the xarray")
2d0b41a37679 ("net/mlx5: Refcount mlx5_irq with integer")
MAINTAINERS
7b637cd52f02 ("MAINTAINERS: fix Microchip CAN BUS Analyzer Tool entry typo")
7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of open coding DEVICE_ATTR, use the helper macro
DEVICE_ATTR_RO to replace DEVICE_ATTR with 0444 octal
permissions.
This was detected as a part of checkpatch evaluation
investigating all reports of DEVICE_ATTR_RO warning
type.
Signed-off-by: Dwaipayan Ray <dwaipayanray1@gmail.com>
Message-Id: <20210730062951.84876-1-dwaipayanray1@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Sometimes we can't get a valid si_sm_data, and we print an error
message accordingly. But the ipmi module seem to like retrying a lot,
in which case we flood the kernel log with a lot of messages, eg:
[46318019.164726] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318020.109700] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318021.158677] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318022.212598] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318023.258564] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318024.210455] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318025.260473] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318026.308445] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318027.356389] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318028.298288] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
[46318029.363302] ipmi_si IPI0001:00: Could not set the global enables: 0xc1.
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: Baoyou Xie <baoyou.xie@alibaba-inc.com>
Cc: Corey Minyard <minyard@acm.org>
Cc: openipmi-developer@lists.sourceforge.net
Cc: linux-kernel@vger.kernel.org
Message-Id: <20210729093228.77098-1-wenyang@linux.alibaba.com>
[Added a missing comma]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The "Arm True Random Number Generator Firmware Interface"[1] provides
an SMCCC based interface to a true hardware random number generator.
So far we are using that in arch_get_random_seed(), but it might be
useful to expose the entropy through the /dev/hwrng device as well. This
allows to assess the quality of the implementation, by using "rngtest"
from the rng-tools package, for example.
Add a simple platform driver implementing the hw_random interface.
The corresponding platform device is created by the SMCCC core code,
we just match it here by name and provide a module alias.
Since the firmware takes care about serialisation, this can happily
coexist with the arch_get_random_seed() bits.
[1] https://developer.arm.com/documentation/den0098/latest/
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
In order to further reduce the scope of ndo_do_ioctl(), move
out the SIOCWANDEV handling into a new network device operation
function.
Adjust the prototype to only pass the if_settings sub-structure
in place of the ifreq, and remove the redundant 'cmd' argument
in the process.
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Jan \"Yenya\" Kasprzak" <kas@fi.muni.cz>
Cc: Kevin Curtis <kevin.curtis@farsite.co.uk>
Cc: Zhao Qiang <qiang.zhao@nxp.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: linux-x25@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
put_tty_driver() is an alias for tty_driver_kref_put(). There is no need
for two exported identical functions, therefore switch all users of
old put_tty_driver() to new tty_driver_kref_put() and remove the former
for good.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: Scott Branden <scott.branden@broadcom.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: David Lin <dtwlin@gmail.com>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Oliver Neukum <oneukum@suse.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Acked-by: Alex Elder <elder@linaro.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210723074317.32690-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dma-buf backed shared memory cannot be reliably freed and unregistered
during a kexec operation even when tee_shm_free() is called on the shm
from a .shutdown hook. The problem occurs because dma_buf_put() calls
fput() which then uses task_work_add(), with the TWA_RESUME parameter,
to queue tee_shm_release() to be called before the current task returns
to user mode. However, the current task never returns to user mode
before the kexec completes so the memory is never freed nor
unregistered.
Use tee_shm_alloc_kernel_buf() to avoid dma-buf backed shared memory
allocation so that tee_shm_free() can directly call tee_shm_release().
This will ensure that the shm can be freed and unregistered during a
kexec operation.
Fixes: 09e574831b27 ("tpm/tpm_ftpm_tee: A driver for firmware TPM running inside TEE")
Fixes: 1760eb689ed6 ("tpm/tpm_ftpm_tee: add shutdown call back")
Cc: stable@vger.kernel.org
Signed-off-by: Tyler Hicks <tyhicks@linux.microsoft.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Rename module_init & module_exit functions that are named
"mod_init" and "mod_exit" so that they are unique in both the
System.map file and in initcall_debug output instead of showing
up as almost anonymous "mod_init".
This is helpful for debugging and in determining how long certain
module_init calls take to execute.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andres Salomon <dilinger@queued.net>
Cc: linux-geode@lists.infradead.org
Cc: Matt Mackall <mpm@selenic.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix the following fallthrough warnings (powernv_defconfig and powerpc64):
drivers/char/powernv-op-panel.c:78:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough]
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
|
|
Pull virtio,vhost,vdpa updates from Michael Tsirkin:
- Doorbell remapping for ifcvf, mlx5
- virtio_vdpa support for mlx5
- Validate device input in several drivers (for SEV and friends)
- ZONE_MOVABLE aware handling in virtio-mem
- Misc fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-mem: prioritize unplug from ZONE_MOVABLE in Big Block Mode
virtio-mem: simplify high-level unplug handling in Big Block Mode
virtio-mem: prioritize unplug from ZONE_MOVABLE in Sub Block Mode
virtio-mem: simplify high-level unplug handling in Sub Block Mode
virtio-mem: simplify high-level plug handling in Sub Block Mode
virtio-mem: use page_zonenum() in virtio_mem_fake_offline()
virtio-mem: don't read big block size in Sub Block Mode
virtio/vdpa: clear the virtqueue state during probe
vp_vdpa: allow set vq state to initial state after reset
virtio-pci library: introduce vp_modern_get_driver_features()
vdpa: support packed virtqueue for set/get_vq_state()
virtio-ring: store DMA metadata in desc_extra for split virtqueue
virtio: use err label in __vring_new_virtqueue()
virtio_ring: introduce virtqueue_desc_add_split()
virtio_ring: secure handling of mapping errors
virtio-ring: factor out desc_extra allocation
virtio_ring: rename vring_desc_extra_packed
virtio-ring: maintain next in extra state for packed virtqueue
vdpa/mlx5: Clear vq ready indication upon device reset
vdpa/mlx5: Add support for doorbell bypassing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver patches for 5.14-rc1.
A bit more than normal, but nothing major, lots of cleanups.
Highlights are:
- lots of tty api cleanups and mxser driver cleanups from Jiri
- build warning fixes
- various serial driver updates
- coding style cleanups
- various tty driver minor fixes and updates
- removal of broken and disable r3964 line discipline (finally!)
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits)
serial: mvebu-uart: remove unused member nb from struct mvebu_uart
arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
dt-bindings: mvebu-uart: fix documentation
serial: mvebu-uart: correctly calculate minimal possible baudrate
serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
serial: mvebu-uart: fix calculation of clock divisor
tty: make linux/tty_flip.h self-contained
serial: Prefer unsigned int to bare use of unsigned
serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
serial: qcom_geni_serial: use DT aliases according to DT bindings
Revert "tty: serial: Add UART driver for Cortina-Access platform"
tty: serial: Add UART driver for Cortina-Access platform
MAINTAINERS: add me back as mxser maintainer
mxser: Documentation, fix typos
mxser: Documentation, make the docs up-to-date
mxser: Documentation, remove traces of callout device
mxser: introduce mxser_16550A_or_MUST helper
mxser: rename flags to old_speed in mxser_set_serial_info
mxser: use port variable in mxser_set_serial_info
mxser: access info->MCR under info->slock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanalabs driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems
mushed together" tree...
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
bus: mhi: Wait for M2 state during system resume
bus: mhi: core: Fix power down latency
intel_th: Wait until port is in reset before programming it
intel_th: msu: Make contiguous buffers uncached
intel_th: Remove an unused exit point from intel_th_remove()
stm class: Spelling fix
nitro_enclaves: Set Bus Master for the NE PCI device
misc: ibmasm: Modify matricies to matrices
misc: vmw_vmci: return the correct errno code
siox: Simplify error handling via dev_err_probe()
fpga: machxo2-spi: Address warning about unused variable
lkdtm/heap: Add init_on_alloc tests
selftests/lkdtm: Enable various testable CONFIGs
lkdtm: Add CONFIG hints in errors where possible
lkdtm: Enable DOUBLE_FAULT on all architectures
lkdtm/heap: Add vmalloc linear overflow test
lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
...
|
|
The buf->len might come from an untrusted device. This
ensures the value would not exceed the size of the buffer
to avoid data corruption or loss.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20210525125622.1203-1-xieyongji@bytedance.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Merge more updates from Andrew Morton:
"190 patches.
Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
signals, exec, kcov, selftests, compress/decompress, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
ipc/util.c: use binary search for max_idx
ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
ipc: use kmalloc for msg_queue and shmid_kernel
ipc sem: use kvmalloc for sem_undo allocation
lib/decompressors: remove set but not used variabled 'level'
selftests/vm/pkeys: exercise x86 XSAVE init state
selftests/vm/pkeys: refill shadow register after implicit kernel write
selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
kcov: add __no_sanitize_coverage to fix noinstr for all architectures
exec: remove checks in __register_bimfmt()
x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
hfsplus: report create_date to kstat.btime
hfsplus: remove unnecessary oom message
nilfs2: remove redundant continue statement in a while-loop
kprobes: remove duplicated strong free_insn_page in x86 and s390
init: print out unknown kernel parameters
checkpatch: do not complain about positive return values starting with EPOLL
checkpatch: improve the indented label test
checkpatch: scripts/spdxcheck.py now requires python3
...
|
|
kernel.h is being used as a dump for all kinds of stuff for a long time.
Here is the attempt to start cleaning it up by splitting out panic and
oops helpers.
There are several purposes of doing this:
- dropping dependency in bug.h
- dropping a loop by moving out panic_notifier.h
- unload kernel.h from something which has its own domain
At the same time convert users tree-wide to use new headers, although for
the time being include new header back to kernel.h to avoid twisted
indirected includes for existing users.
[akpm@linux-foundation.org: thread_info.h needs limits.h]
[andriy.shevchenko@linux.intel.com: ia64 fix]
Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com
Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm driver updates from Jarkko Sakkinen:
"Bug fixes for TPM"
[ This isn't actually the whole contents of the tag and thus doesn't
contain Jarkko's signature - I dropped the two top commits that added
support for signing modules using elliptic curve keys because there's
a new series for that that fixes a few confising things - Linus ]
* tag 'tpmdd-next-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Replace WARN_ONCE() with dev_err_once() in tpm_tis_status()
tpm_tis: Use DEFINE_RES_MEM() to simplify code
tpm: fix some doc warnings in tpm1-cmd.c
tpm_tis_spi: add missing SPI device ID entries
tpm: add longer timeout for TPM2_CC_VERIFY_SIGNATURE
char: tpm: move to use request_irq by IRQF_NO_AUTOEN flag
tpm_tis_spi: set default probe function if device id not match
tpm_crb: Use IOMEM_ERR_PTR when function returns iomem
|
|
Pull IPMI driver updates from Corey Minyard:
"Mostly a restructure of the kcs_bmc driver to make it easier to use
with different types of devices, and just to clean things up and
improve things.
Also some bug fixes for the kcs_bmc driver.
One fix to the IPMI watchdog to stop the timer when the action is
none. Not a big deal, but it's the right thing to do"
* tag 'for-linus-5.14-1' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc_aspeed: Fix less than zero comparison of a unsigned int
ipmi: kcs_bmc_aspeed: Optionally apply status address
ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet
ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices
dt-bindings: ipmi: Convert ASPEED KCS binding to schema
ipmi: kcs_bmc: Add serio adaptor
ipmi: kcs_bmc: Enable IBF on open
ipmi: kcs_bmc: Allow clients to control KCS IRQ state
ipmi: kcs_bmc: Decouple the IPMI chardev from the core
ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
ipmi: kcs_bmc: Split headers into device and client
ipmi: kcs_bmc: Turn the driver data-structures inside-out
ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi
ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions
ipmi: kcs_bmc: Make status update atomic
ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
ipmi/watchdog: Stop watchdog timer when the current action is 'none'
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Algorithms:
- Fix rmmod crash with x86/curve25519
- Add ECDH NIST P384
- Generate assembly files at build-time with perl scripts on arm
- Switch to HMAC SHA512 DRBG as default DRBG
Drivers:
- Add sl3516 crypto engine
- Add ECDH NIST P384 support in hisilicon/hpre
- Add {ofb,cfb,ctr} over {aes,sm4} in hisilicon/sec
- Add {ccm,gcm} over {aes,sm4} in hisilicon/sec
- Enable omap hwrng driver for TI K3 family
- Add support for AEAD algorithms in qce"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (142 commits)
crypto: sl3516 - depends on HAS_IOMEM
crypto: hisilicon/qm - implement for querying hardware tasks status.
crypto: sl3516 - Fix build warning without CONFIG_PM
MAINTAINERS: update caam crypto driver maintainers list
crypto: nx - Fix numerous sparse byte-order warnings
crypto: nx - Fix RCU warning in nx842_OF_upd_status
crypto: api - Move crypto attr definitions out of crypto.h
crypto: nx - Fix memcpy() over-reading in nonce
crypto: hisilicon/sec - Fix spelling mistake "fallbcak" -> "fallback"
crypto: sa2ul - Remove unused auth_len variable
crypto: sl3516 - fix duplicated inclusion
crypto: hisilicon/zip - adds the max shaper type rate
crypto: hisilicon/hpre - adds the max shaper type rate
crypto: hisilicon/sec - adds the max shaper type rate
crypto: hisilicon/qm - supports to inquiry each function's QoS
crypto: hisilicon/qm - add pf ping single vf function
crypto: hisilicon/qm - merges the work initialization process into a single function
crypto: hisilicon/qm - add the "alg_qos" file node
crypto: hisilicon/qm - supports writing QoS int the host
crypto: api - remove CRYPTOA_U32 and related functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/soc
This is a major chunk of IXP4xx modernization:
- Fist we move some registers around to make room for
the predetermined PCI I/O space.
- Then we add some Kconfig options to make it possible
to use the old PCI driver in parallell with the new
shiny one.
- Then we add the new PCI driver and some bindings for
it.
- On top of this we add an (ages old) patch from Arnd
that centralize the CPU/SoC detection in drivers/soc
and make the header a standard Linux header to avoid
the <mach/*> business in drivers.
- Then we split out and modernize some platform data
headers for pata, and hwrandom, and top it up with
DT bindings and support for hwrandom.
* tag 'ixp4xx-arm-soc-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
Link: https://lore.kernel.org/r/CACRpkdbw6HSpp7k6q1FYGmtafLmdAu8bFnpHQOdfBDYYsdLbkw@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Do not tear down the system when getting invalid status from a TPM chip.
This can happen when panic-on-warn is used.
Instead, introduce TPM_TIS_INVALID_STATUS bitflag and use it to trigger
once the error reporting per chip. In addition, print out the value of
TPM_STS for improved forensics.
Link: https://lore.kernel.org/keyrings/YKzlTR1AzUigShtZ@kroah.com/
Fixes: 55707d531af6 ("tpm_tis: Add a check for invalid status")
Cc: stable@vger.kernel.org
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use DEFINE_RES_MEM() to save a couple of lines of code, which is simpler
and more readable. The start address does not need to appear twice.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
Fix the following make W=1 warnings:
drivers/char/tpm/tpm1-cmd.c:325: warning: expecting prototype for tpm_startup(). Prototype was for tpm1_startup() instead
drivers/char/tpm/tpm1-cmd.c:621: warning: expecting prototype for tpm_continue_selftest(). Prototype was for tpm1_continue_selftest() instead
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The SPI core always reports a "MODALIAS=spi:<foo>", even if the device was
registered via OF. This means that this module won't auto-load if a DT has
for example has a node with a compatible "infineon,slb9670" string.
In that case kmod will expect a "MODALIAS=of:N*T*Cinfineon,slb9670" uevent
but instead will get a "MODALIAS=spi:slb9670", which is not present in the
kernel module aliases:
$ modinfo drivers/char/tpm/tpm_tis_spi.ko | grep alias
alias: of:N*T*Cgoogle,cr50C*
alias: of:N*T*Cgoogle,cr50
alias: of:N*T*Ctcg,tpm_tis-spiC*
alias: of:N*T*Ctcg,tpm_tis-spi
alias: of:N*T*Cinfineon,slb9670C*
alias: of:N*T*Cinfineon,slb9670
alias: of:N*T*Cst,st33htpm-spiC*
alias: of:N*T*Cst,st33htpm-spi
alias: spi:cr50
alias: spi:tpm_tis_spi
alias: acpi*:SMO0768:*
To workaround this issue, add in the SPI device ID table all the entries
that are present in the OF device ID table.
Reported-by: Alexander Wellbrock <a.wellbrock@mailbox.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
While running a TPM2_CC_VERIFY_SIGNATURE operation with RSA 3072-bit
keys the TPM driver fails with the following error:
"kernel: [ 2416.187522] tpm tpm0: Operation Timed out"
Since the TPM PC Client specification does not specify a number for
verify signature operation timeout, and the duration of
TPM2_CC_VERIFY_SIGNATURE with RSA 3072-bit keys exceeds the current timeout
of TPM_LONG (2 seconds), it is preferable to pick the longest timeout
possible.
Therefore, set the duration for TPM2_CC_VERIFY_SIGNATUE to TPM_LONG_LONG
(5 minutes).
[jarkko@kernel.org: mangled the short summary a bit]
Link: https://trustedcomputinggroup.org/resource/pc-client-specific-platform-firmware-profile-specification/
Signed-off-by: Amir Mizinski <amirmizi6@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable because of requesting.
Link: https://lore.kernel.org/patchwork/patch/1388765/
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
In DSDT table, TPM _CID was SMO0768, and no _HID definition. After a
kernel upgrade from 4.19 to 5.10, TPM probe function was changed which
causes device probe fails. In order to make newer kernel to be
compatible with the older acpi definition, it would be best set default
probe function.
Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
This is to simplify the code, and IOMEM_ERR_PTR(err) is same with
(__force void __iomem *)ERR_PTR(err).
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The comparisons of the unsigned int hw_type to less than zero always
false because it is unsigned. Fix this by using an int for the
assignment and less than zero check.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 9d2df9a0ad80 ("ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20210616162913.15259-1-colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Some Aspeed KCS devices can derive the status register address from the
address of the data register. As such, the address of the status
register can be implicit in the configuration if desired. On the other
hand, sometimes address schemes might be requested that are incompatible
with the default addressing scheme. Allow these requests where possible
if the devicetree specifies the status register address.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Message-Id: <20210608104757.582199-17-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Input Buffer Full Interrupt Enable (IBFIE) is typoed as IBFIF for some
registers in the datasheet. Fix the driver to use the sensible acronym.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-16-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Apply the SerIRQ ID and level/sense behaviours from the devicetree if
provided.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-15-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
kcs_bmc_serio acts as a bridge between the KCS drivers in the IPMI
subsystem and the existing userspace interfaces available through the
serio subsystem. This is useful when userspace would like to make use of
the BMC KCS devices for purposes that aren't IPMI.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-12-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
This way devices don't get delivered IRQs when no-one is interested.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-11-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Add a mechanism for controlling whether the client associated with a
KCS device will receive Input Buffer Full (IBF) and Output Buffer Empty
(OBE) events. This enables an abstract implementation of poll() for KCS
devices.
A wart in the implementation is that the ASPEED KCS devices don't
support an OBE interrupt for the BMC. Instead we pretend it has one by
polling the status register waiting for the Output Buffer Full (OBF) bit
to clear, and generating an event when OBE is observed.
Cc: CS20 KWLiu <KWLIU@nuvoton.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-10-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Now that we have untangled the data-structures, split the userspace
interface out into its own module. Userspace interfaces and drivers are
registered to the KCS BMC core to support arbitrary binding of either.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-9-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
|
Move all client-private data out of `struct kcs_bmc` into the KCS client
implementation.
With this change the KCS BMC core code now only concerns itself with
abstract `struct kcs_bmc` and `struct kcs_bmc_client` types, achieving
expected separation of concerns. Further, the change clears the path for
implementation of alternative userspace interfaces.
The chardev data-structures are rearranged in the same manner applied to
the KCS device driver data-structures in an earlier patch - `struct
kcs_bmc_client` is embedded in the client's private data and we exploit
container_of() to translate as required.
Finally, now that it is free of client data, `struct kcs_bmc` is renamed
to `struct kcs_bmc_device` to contrast `struct kcs_bmc_client`.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-8-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
|
