| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull virtio fixes from Michael Tsirkin:
"Some last minute fixes - most of them for regressions"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa_sim_net: complete the initialization before register the device
vdpa/mlx5: Add and remove debugfs in setup/teardown driver
tools/virtio: fix typo in README instructions
vhost-scsi: Fix crash during LUN unmapping
vhost-scsi: Fix vhost_scsi struct use after free
virtio-blk: fix ZBD probe in kernels without ZBD support
virtio-blk: fix to match virtio spec
|
|
block size is one very key setting for block layer, and bad block size
could panic kernel easily.
Make sure that block size is set correctly.
Meantime if ublk_validate_params() fails, clear ub->params so that disk
is prevented from being added.
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reported-and-tested-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since SQE memory is shared with userspace, we should only be reading it
once. We cannot read it multiple times, particularly when it's read once
for validation and then read again for the actual use.
ublk_ch_uring_cmd() is safe when called as a retry operation, as the
memory backing is stable at that point. But for normal issue, we want
to ensure that we only read ublksrv_io_cmd once. Wrap the function in
a helper that reads the value into an on-stack copy of the struct.
Cc: stable@vger.kernel.org # 6.0+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the kernel is built without support for zoned block devices,
virtio-blk probe needs to error out any host-managed device scans
to prevent such devices from appearing in the system as non-zoned.
The current virtio-blk code simply bypasses all ZBD checks if
CONFIG_BLK_DEV_ZONED is not defined and this leads to host-managed
block devices being presented as non-zoned in the OS. This is one of
the main problems this patch series is aimed to fix.
In this patch, make VIRTIO_BLK_F_ZONED feature defined even when
CONFIG_BLK_DEV_ZONED is not. This change makes the code compliant with
the voted revision of virtio-blk ZBD spec. Modify the probe code to
look at the situation when VIRTIO_BLK_F_ZONED is negotiated in a kernel
that is built without ZBD support. In this case, the code checks
the zoned model of the device and fails the probe is the device
is host-managed.
The patch also adds the comment to clarify that the call to perform
the zoned device probe is correctly placed after virtio_device ready().
Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Message-Id: <20230330214953.1088216-3-dmitry.fomichev@wdc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The merged patch series to support zoned block devices in virtio-blk
is not the most up to date version. The merged patch can be found at
https://lore.kernel.org/linux-block/20221016034127.330942-3-dmitry.fomichev@wdc.com/
but the latest and reviewed version is
https://lore.kernel.org/linux-block/20221110053952.3378990-3-dmitry.fomichev@wdc.com/
The reason is apparently that the correct mailing lists and
maintainers were not copied.
The differences between the two are mostly cleanups, but there is one
change that is very important in terms of compatibility with the
approved virtio-zbd specification.
Before it was approved, the OASIS virtio spec had a change in
VIRTIO_BLK_T_ZONE_APPEND request layout that is not reflected in the
current virtio-blk driver code. In the running code, the status is
the first byte of the in-header that is followed by some pad bytes
and the u64 that carries the sector at which the data has been written
to the zone back to the driver, aka the append sector.
This layout turned out to be problematic for implementing in QEMU and
the request status byte has been eventually made the last byte of the
in-header. The current code doesn't expect that and this causes the
append sector value always come as zero to the block layer. This needs
to be fixed ASAP.
Fixes: 95bfec41bd3d ("virtio-blk: add support for zoned block devices")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Message-Id: <20230330214953.1088216-2-dmitry.fomichev@wdc.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
LOOP_CONFIGURE is, as far as I understand it, supposed to be a way to
combine LOOP_SET_FD and LOOP_SET_STATUS64 into a single syscall. When
using LOOP_SET_FD+LOOP_SET_STATUS64, a single uevent would be sent for
each partition found on the loop device after the second ioctl(), but
when using LOOP_CONFIGURE, no such uevent was being sent.
In the old setup, uevents are disabled for LOOP_SET_FD, but not for
LOOP_SET_STATUS64. This makes sense, as it prevents uevents being
sent for a partially configured device during LOOP_SET_FD - they're
only sent at the end of LOOP_SET_STATUS64. But for LOOP_CONFIGURE,
uevents were disabled for the entire operation, so that final
notification was never issued. To fix this, reduce the critical
section to exclude the loop_reread_partitions() call, which causes
the uevents to be issued, to after uevents are re-enabled, matching
the behaviour of the LOOP_SET_FD+LOOP_SET_STATUS64 combination.
I noticed this because Busybox's losetup program recently changed from
using LOOP_SET_FD+LOOP_SET_STATUS64 to LOOP_CONFIGURE, and this broke
my setup, for which I want a notification from the kernel any time a
new partition becomes available.
Signed-off-by: Alyssa Ross <hi@alyssa.is>
[hch: reduced the critical section]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fixes: 3448914e8cc5 ("loop: Add LOOP_CONFIGURE ioctl")
Link: https://lore.kernel.org/r/20230320125430.55367-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring_cmd_done() currently assumes that the uring_lock is held
when invoked, and while it generally is, this is not guaranteed.
Pass in the issue_flags associated with it, so that we have
IO_URING_F_UNLOCKED available to be able to lock the CQ ring
appropriately when completing events.
Cc: stable@vger.kernel.org
Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
IO can be started before add_disk() returns, such as reading parititon table,
then the monitor work should work for making forward progress.
So mark device as LIVE before adding disk, meantime change to
DEAD if add_disk() fails.
Fixed: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230318141231.55562-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In vdc_port_probe(), we should check the return value of mdesc_grab() as
it may return NULL, which can cause potential NPD bug.
Fixes: 43fdf27470b2 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20230315062032.1741692-1-windhl@126.com
[axboe: style cleanup]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use a local struct request pointer variable to avoid having to
dereference struct blk_mq_queue_data multiple times. While at it, also
fix the function argument indentation and remove a useless "else" after
a return.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When injecting a fake timeout into the null_blk driver using
fail_io_timeout, the request timeout handler does not execute
blk_mq_complete_request(), so the complete callback is never executed
for a timedout request.
The null_blk driver also has a driver-specific fake timeout mechanism
which does not have this problem. Fix the problem with fail_io_timeout
by using the same meachanism as null_blk internal timeout feature, using
the fake_timeout field of null_blk commands.
Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Fixes: de3510e52b0a ("null_blk: fix command timeout completion handling")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
do_req_filebacked() calls blk_mq_complete_request() synchronously or
asynchronously when using asynchronous I/O unless memory allocation fails.
Hence, modify loop_handle_cmd() such that it does not dereference 'cmd' nor
'rq' after do_req_filebacked() finished unless we are sure that the request
has not yet been completed. This patch fixes the following kernel crash:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000054
Call trace:
css_put.42938+0x1c/0x1ac
loop_process_work+0xc8c/0xfd4
loop_rootcg_workfn+0x24/0x34
process_one_work+0x244/0x558
worker_thread+0x400/0x8fc
kthread+0x16c/0x1e0
ret_from_fork+0x10/0x20
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Fixes: c74d40e8b5e2 ("loop: charge i/o to mem and blk cg")
Fixes: bc07c10a3603 ("block: loop: support DIO & AIO")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230314182155.80625-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Don't access released socket during error recovery (Akinobu
Mita)
- Bring back auto-removal of deleted namespaces during sequential
scan (Christoph Hellwig)
- Fix an error code in nvme_auth_process_dhchap_challenge (Dan
Carpenter)
- Show well known discovery name (Daniel Wagner)
- Add a missing endianess conversion in effects masking (Keith
Busch)
- Fix for a regression introduced in blk-rq-qos during init in this
merge window (Breno)
- Reorder a few fields in struct blk_mq_tag_set, eliminating a few
holes and shrinking it (Christophe)
- Remove redundant bdev_get_queue() NULL checks (Juhyung)
- Add sed-opal single user mode support flag (Luca)
- Remove SQE128 check in ublk as it isn't needed, saving some memory
(Ming)
- Op specific segment checking for cloned requests (Uday)
- Exclusive open partition scan fixes (Yu)
- Loop offset/size checking before assigning them in the device (Zhong)
- Bio polling fixes (me)
* tag 'block-6.3-2023-03-03' of git://git.kernel.dk/linux:
blk-mq: enforce op-specific segment limits in blk_insert_cloned_request
nvme-fabrics: show well known discovery name
nvme-tcp: don't access released socket during error recovery
nvme-auth: fix an error code in nvme_auth_process_dhchap_challenge()
nvme: bring back auto-removal of deleted namespaces during sequential scan
blk-iocost: Pass gendisk to ioc_refresh_params
nvme: fix sparse warning on effects masking
block: be a bit more careful in checking for NULL bdev while polling
block: clear bio->bi_bdev when putting a bio back in the cache
loop: loop_set_status_from_info() check before assignment
ublk: remove check IO_URING_F_SQE128 in ublk_ch_uring_cmd
block: remove more NULL checks after bdev_get_queue()
blk-mq: Reorder fields in 'struct blk_mq_tag_set'
block: fix scan partition for exclusively open device again
block: Revert "block: Do not reread partition table on exclusively open device"
sed-opal: add support flag for SUM in status ioctl
|
|
Pull ceph fixes from Ilya Dryomov:
"Two small fixes from Xiubo and myself, marked for stable"
* tag 'ceph-for-6.3-rc1' of https://github.com/ceph/ceph-client:
rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails
ceph: update the time stamps and try to drop the suid/sgid
|
|
If getting an ID or setting up a work queue in rbd_dev_create() fails,
use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts
is triggered in do_rbd_add(). The root cause is that the ownership of
these structures is transfered to rbd_dev prematurely and they all end
up getting freed when rbd_dev_create() calls rbd_dev_free() prior to
returning to do_rbd_add().
Found by Linux Verification Center (linuxtesting.org) with SVACE, an
incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>.
Cc: stable@vger.kernel.org
Fixes: 1643dfa4c2c8 ("rbd: introduce a per-device ordered workqueue")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
Pull virtio updates from Michael Tsirkin:
- device feature provisioning in ifcvf, mlx5
- new SolidNET driver
- support for zoned block device in virtio blk
- numa support in virtio pmem
- VIRTIO_F_RING_RESET support in vhost-net
- more debugfs entries in mlx5
- resume support in vdpa
- completion batching in virtio blk
- cleanup of dma api use in vdpa
- now simulating more features in vdpa-sim
- documentation, features, fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (64 commits)
vdpa/mlx5: support device features provisioning
vdpa/mlx5: make MTU/STATUS presence conditional on feature bits
vdpa: validate device feature provisioning against supported class
vdpa: validate provisioned device features against specified attribute
vdpa: conditionally read STATUS in config space
vdpa: fix improper error message when adding vdpa dev
vdpa/mlx5: Initialize CVQ iotlb spinlock
vdpa/mlx5: Don't clear mr struct on destroy MR
vdpa/mlx5: Directly assign memory key
tools/virtio: enable to build with retpoline
vringh: fix a typo in comments for vringh_kiov
vhost-vdpa: print warning when vhost_vdpa_alloc_domain fails
scsi: virtio_scsi: fix handling of kmalloc failure
vdpa: Fix a couple of spelling mistakes in some messages
vhost-net: support VIRTIO_F_RING_RESET
vhost-scsi: convert sysfs snprintf and sprintf to sysfs_emit
vdpa: mlx5: support per virtqueue dma device
vdpa: set dma mask for vDPA device
virtio-vdpa: support per vq dma device
vdpa: introduce get_vq_dma_device()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Daniel Verkamp has contributed a memfd series ("mm/memfd: add
F_SEAL_EXEC") which permits the setting of the memfd execute bit at
memfd creation time, with the option of sealing the state of the X
bit.
- Peter Xu adds a patch series ("mm/hugetlb: Make huge_pte_offset()
thread-safe for pmd unshare") which addresses a rare race condition
related to PMD unsharing.
- Several folioification patch serieses from Matthew Wilcox, Vishal
Moola, Sidhartha Kumar and Lorenzo Stoakes
- Johannes Weiner has a series ("mm: push down lock_page_memcg()")
which does perform some memcg maintenance and cleanup work.
- SeongJae Park has added DAMOS filtering to DAMON, with the series
"mm/damon/core: implement damos filter".
These filters provide users with finer-grained control over DAMOS's
actions. SeongJae has also done some DAMON cleanup work.
- Kairui Song adds a series ("Clean up and fixes for swap").
- Vernon Yang contributed the series "Clean up and refinement for maple
tree".
- Yu Zhao has contributed the "mm: multi-gen LRU: memcg LRU" series. It
adds to MGLRU an LRU of memcgs, to improve the scalability of global
reclaim.
- David Hildenbrand has added some userfaultfd cleanup work in the
series "mm: uffd-wp + change_protection() cleanups".
- Christoph Hellwig has removed the generic_writepages() library
function in the series "remove generic_writepages".
- Baolin Wang has performed some maintenance on the compaction code in
his series "Some small improvements for compaction".
- Sidhartha Kumar is doing some maintenance work on struct page in his
series "Get rid of tail page fields".
- David Hildenbrand contributed some cleanup, bugfixing and
generalization of pte management and of pte debugging in his series
"mm: support __HAVE_ARCH_PTE_SWP_EXCLUSIVE on all architectures with
swap PTEs".
- Mel Gorman and Neil Brown have removed the __GFP_ATOMIC allocation
flag in the series "Discard __GFP_ATOMIC".
- Sergey Senozhatsky has improved zsmalloc's memory utilization with
his series "zsmalloc: make zspage chain size configurable".
- Joey Gouly has added prctl() support for prohibiting the creation of
writeable+executable mappings.
The previous BPF-based approach had shortcomings. See "mm: In-kernel
support for memory-deny-write-execute (MDWE)".
- Waiman Long did some kmemleak cleanup and bugfixing in the series
"mm/kmemleak: Simplify kmemleak_cond_resched() & fix UAF".
- T.J. Alumbaugh has contributed some MGLRU cleanup work in his series
"mm: multi-gen LRU: improve".
- Jiaqi Yan has provided some enhancements to our memory error
statistics reporting, mainly by presenting the statistics on a
per-node basis. See the series "Introduce per NUMA node memory error
statistics".
- Mel Gorman has a second and hopefully final shot at fixing a CPU-hog
regression in compaction via his series "Fix excessive CPU usage
during compaction".
- Christoph Hellwig does some vmalloc maintenance work in the series
"cleanup vfree and vunmap".
- Christoph Hellwig has removed block_device_operations.rw_page() in
ths series "remove ->rw_page".
- We get some maple_tree improvements and cleanups in Liam Howlett's
series "VMA tree type safety and remove __vma_adjust()".
- Suren Baghdasaryan has done some work on the maintainability of our
vm_flags handling in the series "introduce vm_flags modifier
functions".
- Some pagemap cleanup and generalization work in Mike Rapoport's
series "mm, arch: add generic implementation of pfn_valid() for
FLATMEM" and "fixups for generic implementation of pfn_valid()"
- Baoquan He has done some work to make /proc/vmallocinfo and
/proc/kcore better represent the real state of things in his series
"mm/vmalloc.c: allow vread() to read out vm_map_ram areas".
- Jason Gunthorpe rationalized the GUP system's interface to the rest
of the kernel in the series "Simplify the external interface for
GUP".
- SeongJae Park wishes to migrate people from DAMON's debugfs interface
over to its sysfs interface. To support this, we'll temporarily be
printing warnings when people use the debugfs interface. See the
series "mm/damon: deprecate DAMON debugfs interface".
- Andrey Konovalov provided the accurately named "lib/stackdepot: fixes
and clean-ups" series.
- Huang Ying has provided a dramatic reduction in migration's TLB flush
IPI rates with the series "migrate_pages(): batch TLB flushing".
- Arnd Bergmann has some objtool fixups in "objtool warning fixes".
* tag 'mm-stable-2023-02-20-13-37' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (505 commits)
include/linux/migrate.h: remove unneeded externs
mm/memory_hotplug: cleanup return value handing in do_migrate_range()
mm/uffd: fix comment in handling pte markers
mm: change to return bool for isolate_movable_page()
mm: hugetlb: change to return bool for isolate_hugetlb()
mm: change to return bool for isolate_lru_page()
mm: change to return bool for folio_isolate_lru()
objtool: add UACCESS exceptions for __tsan_volatile_read/write
kmsan: disable ftrace in kmsan core code
kasan: mark addr_has_metadata __always_inline
mm: memcontrol: rename memcg_kmem_enabled()
sh: initialize max_mapnr
m68k/nommu: add missing definition of ARCH_PFN_OFFSET
mm: percpu: fix incorrect size in pcpu_obj_full_size()
maple_tree: reduce stack usage with gcc-9 and earlier
mm: page_alloc: call panic() when memoryless node allocation fails
mm: multi-gen LRU: avoid futile retries
migrate_pages: move THP/hugetlb migration support check to simplify code
migrate_pages: batch flushing TLB
migrate_pages: share more code between _unmap and _move
...
|
|
In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should
be checked before reassignment, because if an overflow error occurs, the
original correct value will be changed to the wrong value, and it will not
be changed back.
More, the original patch did not solve the problem, the value was set and
ioctl returned an error, but the subsequent io used the value in the loop
driver, which still caused an alarm:
loop_handle_cmd
do_req_filebacked
loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset;
lo_rw_aio
cmd->iocb.ki_pos = pos
Fixes: c490a0b5a4f3 ("loop: Check for overflow while configuring loop")
Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230221095027.3656193-1-zhongjinghua@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA updates from Damien Le Moal:
- Small cleanup of the pata_octeon driver to drop a useless platform
callback (Uwe)
- Simplify ata_scsi_cmd_error_handler() code using the fact that
ap->ops->error_handler is NULL most of the time (Wenchao)
- Several patches improving libata error handling. This is in
preparation for supporting the command duration limits (CDL) feature.
The changes allow handling corner cases of ATA NCQ errors which do
not happen with regular drives but will be triggered with CDL drives
(Niklas)
- Simplify the qc_fill_rtf operation (me)
- Improve SCSI command translation for REPORT_SUPPORTED_OPERATION_CODES
command (me)
- Cleanup of libata FUA handling.
This falls short of enabling FUA for ATA drives that support it by
default as there were concerns that old drives would break. The
series however fixes several issues with the FUA support to ensure
that FUA is reported as being supported only for drives that can
handle all possible write cases (NCQ and non-NCQ). A check in the
block layer is also added to ensure that we never see read FUA
commands (current behavior) (me)
- Several patches to move the old PARIDE (parallel port IDE) driver to
libata as pata_parport. Given that this driver also needs protocol
modules, the driver code resides in its own pata_parport directoy
under drivers/ata (Ondrej)
* tag 'ata-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_parport: Fix ida_alloc return value error check
drivers/block: Move PARIDE protocol modules to drivers/ata/pata_parport
drivers/block: Remove PARIDE core and high-level protocols
ata: pata_parport: add driver (PARIDE replacement)
ata: libata: exclude FUA support for known buggy drives
ata: libata: Fix FUA handling in ata_build_rw_tf()
ata: libata: cleanup fua support detection
ata: libata: Rename and cleanup ata_rwcmd_protocol()
ata: libata: Introduce ata_ncq_supported()
block: add a sanity check for non-write flush/fua bios
ata: libata-scsi: improve ata_scsiop_maint_in()
ata: libata-scsi: do not overwrite SCSI ML and status bytes
ata: libata: move NCQ related ATA_DFLAGs
ata: libata: respect successfully completed commands during errors
ata: libata: read the shared status for successful NCQ commands once
ata: libata: simplify qc_fill_rtf port operation interface
ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EH
ata: libata-eh: Cleanup ata_scsi_cmd_error_handler()
ata: octeon: Drop empty platform remove function
|
|
sizeof(struct ublksrv_io_cmd) is 16bytes, which can be held in 64byte SQE,
so not necessary to check IO_URING_F_SQE128.
With this change, we get chance to save half SQ ring memory.
Fixed: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230220041413.1524335-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch adds completion batching to the IRQ path. It reuses batch
completion code of virtblk_poll(). It collects requests to io_comp_batch
and processes them all at once. It can boost up the performance by 2%.
To validate the performance improvement and stabilty, I did fio test with
4 vCPU VM and 12 vCPU VM respectively. Both VMs have 8GB ram and the same
number of HW queues as vCPU.
The fio cammad is as follows and I ran the fio 5 times and got IOPS average.
(io_uring, randread, direct=1, bs=512, iodepth=64 numjobs=2,4)
Test result shows about 2% improvement.
4 vcpu VM | numjobs=2 | numjobs=4
-----------------------------------------------------------
fio without patch | 367.2K IOPS | 397.6K IOPS
-----------------------------------------------------------
fio with patch | 372.8K IOPS | 407.7K IOPS
12 vcpu VM | numjobs=2 | numjobs=4
-----------------------------------------------------------
fio without patch | 363.6K IOPS | 374.8K IOPS
-----------------------------------------------------------
fio with patch | 373.8K IOPS | 385.3K IOPS
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20221221145456.281218-3-suwan.kim027@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Driver should set req->state to MQ_RQ_COMPLETE after it finishes to process
req. But virtio-blk doesn't set MQ_RQ_COMPLETE after virtblk_poll() handles
req and req->state still remains MQ_RQ_IN_FLIGHT. Fortunately so far there
is no issue about it because blk_mq_end_request_batch() sets req->state to
MQ_RQ_IDLE.
In this patch, virblk_poll() calls blk_mq_complete_request_remote() to set
req->state to MQ_RQ_COMPLETE before it adds req to a batch completion list.
So it properly sets req->state after polling I/O is finished.
Fixes: 4e0400525691 ("virtio-blk: support polling I/O")
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20221221145456.281218-2-suwan.kim027@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Pull block updates from Jens Axboe:
- NVMe updates via Christoph:
- Small improvements to the logging functionality (Amit Engel)
- Authentication cleanups (Hannes Reinecke)
- Cleanup and optimize the DMA mapping cod in the PCIe driver
(Keith Busch)
- Work around the command effects for Format NVM (Keith Busch)
- Misc cleanups (Keith Busch, Christoph Hellwig)
- Fix and cleanup freeing single sgl (Keith Busch)
- MD updates via Song:
- Fix a rare crash during the takeover process
- Don't update recovery_cp when curr_resync is ACTIVE
- Free writes_pending in md_stop
- Change active_io to percpu
- Updates to drbd, inching us closer to unifying the out-of-tree driver
with the in-tree one (Andreas, Christoph, Lars, Robert)
- BFQ update adding support for multi-actuator drives (Paolo, Federico,
Davide)
- Make brd compliant with REQ_NOWAIT (me)
- Fix for IOPOLL and queue entering, fixing stalled IO waiting on
timeouts (me)
- Fix for REQ_NOWAIT with multiple bios (me)
- Fix memory leak in blktrace cleanup (Greg)
- Clean up sbitmap and fix a potential hang (Kemeng)
- Clean up some bits in BFQ, and fix a bug in the request injection
(Kemeng)
- Clean up the request allocation and issue code, and fix some bugs
related to that (Kemeng)
- ublk updates and fixes:
- Add support for unprivileged ublk (Ming)
- Improve device deletion handling (Ming)
- Misc (Liu, Ziyang)
- s390 dasd fixes (Alexander, Qiheng)
- Improve utility of request caching and fixes (Anuj, Xiao)
- zoned cleanups (Pankaj)
- More constification for kobjs (Thomas)
- blk-iocost cleanups (Yu)
- Remove bio splitting from drivers that don't need it (Christoph)
- Switch blk-cgroups to use struct gendisk. Some of this is now
incomplete as select late reverts were done. (Christoph)
- Add bvec initialization helpers, and convert callers to use that
rather than open-coding it (Christoph)
- Misc fixes and cleanups (Jinke, Keith, Arnd, Bart, Li, Martin,
Matthew, Ulf, Zhong)
* tag 'for-6.3/block-2023-02-16' of git://git.kernel.dk/linux: (169 commits)
brd: use radix_tree_maybe_preload instead of radix_tree_preload
block: use proper return value from bio_failfast()
block: bio-integrity: Copy flags when bio_integrity_payload is cloned
block: Fix io statistics for cgroup in throttle path
brd: mark as nowait compatible
brd: check for REQ_NOWAIT and set correct page allocation mask
brd: return 0/-error from brd_insert_page()
block: sync mixed merged request's failfast with 1st bio's
Revert "blk-cgroup: pin the gendisk in struct blkcg_gq"
Revert "blk-cgroup: pass a gendisk to blkg_lookup"
Revert "blk-cgroup: delay blk-cgroup initialization until add_disk"
Revert "blk-cgroup: delay calling blkcg_exit_disk until disk_release"
Revert "blk-cgroup: move the cgroup information to struct gendisk"
nvme-pci: remove iod use_sgls
nvme-pci: fix freeing single sgl
block: ublk: check IO buffer based on flag need_get_data
s390/dasd: Fix potential memleak in dasd_eckd_init()
s390/dasd: sort out physical vs virtual pointers usage
block: Remove the ALLOC_CACHE_SLACK constant
block: make kobj_type structures constant
...
|
|
Unconditionally calling radix_tree_preload_end() results in a OOPS
message as the preload is only conditionally called for
gfpflags_allow_blocking().
[ 20.267323] BUG: using smp_processor_id() in preemptible [00000000] code: fio/416
[ 20.267837] caller is brd_insert_page.part.0+0xbe/0x190 [brd]
[ 20.269436] Call Trace:
[ 20.269598] <TASK>
[ 20.269742] dump_stack_lvl+0x32/0x50
[ 20.269982] check_preemption_disabled+0xd1/0xe0
[ 20.270289] brd_insert_page.part.0+0xbe/0x190 [brd]
[ 20.270664] brd_submit_bio+0x33f/0xf40 [brd]
Use radix_tree_maybe_preload() which does preload only if
gfpflags_allow_blocking() is true but also takes the lock. Therefore,
unconditionally calling radix_tree_preload_end() should not create any
issues and the message disappears.
Fixes: 6ded703c56c2 ("brd: check for REQ_NOWAIT and set correct page allocation mask")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230217121442.33914-1-p.raghav@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Not every OPAL drive supports SUM (Single User Mode), so report this
information to userspace via the get-status ioctl so that we can adjust
the formatting options accordingly.
Tested on a kingston drive (which supports it) and a samsung one
(which does not).
Signed-off-by: Luca Boccassi <bluca@debian.org>
Link: https://lore.kernel.org/r/20230210010612.28729-1-luca.boccassi@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
By default, non-mq drivers do not support nowait. This causes io_uring
to use a slower path as the driver cannot be trust not to block. brd
can safely set the nowait flag, as worst case all it does is a NOIO
allocation.
For io_uring, this makes a substantial difference. Before:
submitter=0, tid=453, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=440.03K, BW=1718MiB/s, IOS/call=32/31
IOPS=428.96K, BW=1675MiB/s, IOS/call=32/32
IOPS=442.59K, BW=1728MiB/s, IOS/call=32/31
IOPS=419.65K, BW=1639MiB/s, IOS/call=32/32
IOPS=426.82K, BW=1667MiB/s, IOS/call=32/31
and after:
submitter=0, tid=354, file=/dev/ram0, node=-1
polled=0, fixedbufs=1/0, register_files=1, buffered=0, QD=128
Engine=io_uring, sq_ring=128, cq_ring=128
IOPS=3.37M, BW=13.15GiB/s, IOS/call=32/31
IOPS=3.45M, BW=13.46GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.42GiB/s, IOS/call=32/32
IOPS=3.43M, BW=13.39GiB/s, IOS/call=32/31
IOPS=3.43M, BW=13.38GiB/s, IOS/call=32/31
or about an 8x in difference. Now that brd is prepared to deal with
REQ_NOWAIT reads/writes, mark it as supporting that.
Cc: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/linux-block/20230203103005.31290-1-p.raghav@samsung.com/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If REQ_NOWAIT is set, then do a non-blocking allocation if the operation
is a write and we need to insert a new page. Currently REQ_NOWAIT cannot
be set as the queue isn't marked as supporting nowait, this change is in
preparation for allowing that.
radix_tree_preload() warns on attempting to call it with an allocation
mask that doesn't allow blocking. While that warning could arguably
be removed, we need to handle radix insertion failures anyway as they
are more likely if we cannot block to get memory.
Remove legacy BUG_ON()'s and turn them into proper errors instead, one
for the allocation failure and one for finding a page that doesn't
match the correct index.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It currently returns a page, but callers just check for NULL/page to
gauge success. Clean this up and return the appropriate error directly
instead.
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
virtio blk returns a 64 bit append_sector in an input buffer,
in LE format. This field is not tagged as LE correctly, so
even though the generated code is ok, we get warnings from sparse:
drivers/block/virtio_blk.c:332:33: sparse: sparse: cast to restricted __le64
Make sparse happy by using the correct type.
Message-Id: <20221220125154.564265-1-mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
virtblk_result returns blk_status_t which is a bitwise restricted type,
so we are not supposed to stuff it in a plain int temporary variable.
All we do with it is pass it on to a function expecting blk_status_t so
the generated code is ok, but we get warnings from sparse:
drivers/block/virtio_blk.c:326:36: sparse: sparse: incorrect type in initializer (different base types) @@ expected int status @@
+got restricted blk_status_t @@
drivers/block/virtio_blk.c:334:33: sparse: sparse: incorrect type in argument 2 (different base types) @@ expected restricted
+blk_status_t [usertype] error @@ got int status @@
Make sparse happy by using the correct type.
Message-Id: <20221220124152.523531-1-mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
|
|
This patch adds support for Zoned Block Devices (ZBDs) to the kernel
virtio-blk driver.
The patch accompanies the virtio-blk ZBD support draft that is now
being proposed for standardization. The latest version of the draft is
linked at
https://github.com/oasis-tcs/virtio-spec/issues/143 .
The QEMU zoned device code that implements these protocol extensions
has been developed by Sam Li and it is currently in review at the QEMU
mailing list.
A number of virtblk request structure changes has been introduced to
accommodate the functionality that is specific to zoned block devices
and, most importantly, make room for carrying the Zoned Append sector
value from the device back to the driver along with the request status.
The zone-specific code in the patch is heavily influenced by NVMe ZNS
code in drivers/nvme/host/zns.c, but it is simpler because the proposed
virtio ZBD draft only covers the zoned device features that are
relevant to the zoned functionality provided by Linux block layer.
includes the following fixup:
virtio-blk: fix probe without CONFIG_BLK_DEV_ZONED
When building without CONFIG_BLK_DEV_ZONED, VIRTIO_BLK_F_ZONED
is excluded from array of driver features.
As a result virtio_has_feature panics in virtio_check_driver_offered_feature
since that by design verifies that a feature we are checking for
is listed in the feature array.
To fix, replace the call to virtio_has_feature with a stub.
Message-Id: <20221016034127.330942-3-dmitry.fomichev@wdc.com>
Co-developed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Message-Id: <20221220112340.518841-1-mst@redhat.com>
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Debugged-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
|
|
Currently, uring_cmd with UBLK_IO_FETCH_REQ or
UBLK_IO_COMMIT_AND_FETCH_REQ is always checked whether
userspace server has provided IO buffer even flag
UBLK_F_NEED_GET_DATA is configured.
This is a excessive check. If UBLK_F_NEED_GET_DATA is
configured, FETCH_RQ doesn't need to provide IO buffer;
COMMIT_AND_FETCH_REQ also doesn't need to do that if
the IO type is not READ.
Check ub_cmd->addr together with ublk_need_get_data()
and IO type in ublk_ch_uring_cmd().
With this fix, userspace server doesn't need to preserve
buffers for every ublk_io when flag UBLK_F_NEED_GET_DATA
is configured, in order to save memory.
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Fixes: c86019ff75c1 ("ublk_drv: add support for UBLK_IO_NEED_GET_DATA")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230210141356.112321-1-xiaodong.liu@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Inside ublk_ctrl_del_dev(), when the device is removed, we wait
until the device number is freed with holding global lock of
ublk_ctl_mutex, this way isn't friendly from user viewpoint:
1) if device is in-use, the current delete command hangs in
ublk_ctrl_del_dev(), and user can't break from the handling
because wait_event() is used
2) global lock is held, so any new device can't be added and
other old devices can't be removed.
Improve the deleting handling by the following way, suggested by
Nadav:
1) wait without holding the global lock
2) replace wait_event() with wait_event_interruptible()
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Suggested-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207150700.545530-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queuedata is not referenced in ublk_drv and we can use driver_data
instead. Pass NULL to blk_mq_alloc_disk() as queuedata while allocating
ublk's gendisk.
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-4-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
WRITE_ZEROES won't return bytes returned just like FLUSH and DISCARD,
and we can end it directly. Add missing comment for it in
ublk_complete_rq().
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-3-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
bio_has_data() allows a NULL bio so the NULL check in
ublk_rq_has_data() is unnecessary.
Signed-off-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230207070839.370817-2-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull block fixes from Jens Axboe:
"A bit bigger than I'd like at this point, but mostly a bunch of little
fixes. In detail:
- NVMe pull request via Christoph:
- Fix a missing queue put in nvmet_fc_ls_create_association
(Amit Engel)
- Clear queue pointers on tag_set initialization failure
(Maurizio Lombardi)
- Use workqueue dedicated to authentication (Shin'ichiro
Kawasaki)
- Fix for an overflow in ublk (Liu)
- Fix for leaking a queue reference in block cgroups (Ming)
- Fix for a use-after-free in BFQ (Yu)"
* tag 'block-6.2-2023-02-03' of git://git.kernel.dk/linux:
blk-cgroup: don't update io stat for root cgroup
nvme-auth: use workqueue dedicated to authentication
nvme: clear the request_queue pointers on failure in nvme_alloc_io_tag_set
nvme: clear the request_queue pointers on failure in nvme_alloc_admin_tag_set
nvme-fc: fix a missing queue put in nvmet_fc_ls_create_association
block: Fix the blk_mq_destroy_queue() documentation
block: ublk: extending queue_size to fix overflow
block, bfq: fix uaf for bfqq in bic_set_bfqq()
|
|
Use the bvec_set_page helper to initialize bvecs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-11-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the bvec_set_virt helper to initialize the special_vec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use the bvec_set_page helper to initialize the copy up bvec.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Link: https://lore.kernel.org/r/20230203150634.3199647-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The ->rw_page method is a special purpose bypass of the usual bio handling
path that is limited to single-page reads and writes and synchronous which
causes a lot of extra code in the drivers, callers and the block layer.
The only remaining user is the MM swap code. Switch that swap code to
simply submit a single-vec on-stack bio an synchronously wait on it based
on a newly added QUEUE_FLAG_SYNCHRONOUS flag set by the drivers that
currently implement ->rw_page instead. While this touches one extra cache
line and executes extra code, it simplifies the block layer and drivers
and ensures that all feastures are properly supported by all drivers, e.g.
right now ->rw_page bypassed cgroup writeback entirely.
[akpm@linux-foundation.org: fix comment typo, per Dan]
Link: https://lkml.kernel.org/r/20230125133436.447864-8-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Make the following minor changes which were reported by colleagues
while reviewing this code:
- Remove the parentheses from around the LOOP_DEFAULT_HW_Q_DEPTH
definition since these are superfluous.
- Accept other number formats than decimal, e.g. hexadecimal.
- Do not set hw_queue_depth to an out-of-range value, even if that value
won't be used.
- Use the LOOP_DEFAULT_HW_Q_DEPTH macro in the kernel module parameter
description to prevent that the description gets out of sync.
This patch has been tested as follows:
# modprobe -r loop
# modprobe loop hw_queue_depth=-1
modprobe: ERROR: could not insert 'loop': Invalid argument
# modprobe loop hw_queue_depth=0
modprobe: ERROR: could not insert 'loop': Invalid argument
# modprobe loop hw_queue_depth=1; cat /sys/module/loop/parameters/hw_queue_depth
1
# modprobe -r loop; modprobe loop; cat /sys/module/loop/parameters/hw_queue_depth hw_queue_depth=0x10
16
# modprobe -r loop; modprobe loop; cat /sys/module/loop/parameters/hw_queue_depth hw_queue_depth=128
128
# modprobe -r loop; modprobe loop hw_queue_depth=129; cat /sys/module/loop/parameters/hw_queue_depth
129
# modprobe -r loop; modprobe loop hw_queue_depth=$((1<<32))
modprobe: ERROR: could not insert 'loop': Numerical result out of range
See also commit ef44c50837ab ("loop: allow user to set the queue
depth").
Cc: Chaitanya Kulkarni <kch@nvidia.com>
Cc: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230130211347.832110-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Owner of one unprivileged ublk device could be one evil user, which
can grant this disk's privilege to other users deliberately, and
this way could be like making one trap and waiting for other users
to be caught.
So only owner to open unprivileged disk even though the owner
grants disk privilege to other user. This way is reasonable too
given anyone can create ublk disk, and no need other's grant.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Fixes: 4093cb5a0634 ("ublk_drv: add mechanism for supporting unprivileged ublk device")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230131040446.214583-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When validating drafted SPDK ublk target, in a case that
assigning large queue depth to multiqueue ublk device,
ublk target would run into a weird incorrect state. During
rounds of review and debug, An overflow bug was found
in ublk driver.
In ublk_cmd.h, UBLK_MAX_QUEUE_DEPTH is 4096 which means
each ublk queue depth can be set as large as 4096. But
when setting qd for a ublk device,
sizeof(struct ublk_queue) + depth * sizeof(struct ublk_io)
will be larger than 65535 if qd is larger than 2728.
Then queue_size is overflowed, and ublk_get_queue()
references a wrong pointer position. The wrong content of
ublk_queue elements will lead to out-of-bounds memory
access.
Extend queue_size in ublk_device as "unsigned int".
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Fixes: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230131070552.115067-1-xiaodong.liu@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move PARIDE protocol modules out of drivers/block into
drivers/ata/pata_parport and update the CONFIG_ symbol names to
PATA_PARPORT.
[Damien]
The pata_parport driver file itsef is also moved together with the
protocol modules in drivers/ata/pata_parport.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
Remove PARIDE core and high level protocols, taking care not to break
low-level drivers (used by pata_parport). Also update documentation.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
The pata_parport is a libata-based replacement of the old PARIDE
subsystem - driver for parallel port IDE devices.
It uses the original paride low-level protocol drivers but does not
need the high-level drivers (pd, pcd, pf, pt, pg). The IDE devices
behind parallel port adapters are handled by the ATA layer.
This will allow paride and its high-level drivers to be removed.
Unfortunately, libata drivers cannot sleep so pata_parport claims
parport before activating the ata host and keeps it claimed (and
protocol connected) until the ata host is removed. This means that
no devices can be chained (neither other pata_parport devices nor
a printer).
paride and pata_parport are mutually exclusive because the compiled
protocol drivers are incompatible.
Tested with:
- Imation SuperDisk LS-120 and HP C4381A (EPAT)
- Freecom Parallel CD (FRPW)
- Toshiba Mobile CD-RW 2793008 w/Freecom Parallel Cable rev.903 (FRIQ)
- Backpack CD-RW 222011 and CD-RW 19350 (BPCK6)
The following bugs in low-level protocol drivers were found and will
be fixed later:
Note: EPP-32 mode is buggy in EPAT - and also in all other protocol
drivers - they don't handle non-multiple-of-4 block transfers
correctly. This causes problems with LS-120 drive.
There is also another bug in EPAT: EPP modes don't work unless a 4-bit
or 8-bit mode is used first (probably some initialization missing?).
Once the device is initialized, EPP works until power cycle.
So after device power on, you have to:
echo "parport0 epat 0" >/sys/bus/pata_parport/new_device
echo pata_parport.0 >/sys/bus/pata_parport/delete_device
echo "parport0 epat 4" >/sys/bus/pata_parport/new_device
(autoprobe will initialize correctly as it tries the slowest modes
first but you'll get the broken EPP-32 mode)
Note: EPP modes are buggy in FRPW, only modes 0 and 1 work.
Signed-off-by: Ondrej Zary <linux@zary.sk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
|
|
ps3vram iterates over the bio one segment, that is page aligned and max
page sized chunk, a time. Because of that there is no point in
calling bio_split_to_limits, or explicitly setting the default limits
that are only used by bio_split_to_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Geoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/20230123074718.57951-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
unprivileged ublk device is helpful for container use case, such
as: ublk device created in one unprivileged container can be controlled
and accessed by this container only.
Implement this feature by adding flag of UBLK_F_UNPRIVILEGED_DEV, and if
this flag isn't set, any control command has been run from privileged
user. Otherwise, any control command can be sent from any unprivileged
user, but the user has to be permitted to access the ublk char device
to be controlled.
In case of UBLK_F_UNPRIVILEGED_DEV:
1) for command UBLK_CMD_ADD_DEV, it is always allowed, and user needs
to provide owner's uid/gid in this command, so that udev can set correct
ownership for the created ublk device, since the device owner uid/gid
can be queried via command of UBLK_CMD_GET_DEV_INFO.
2) for other control commands, they can only be run successfully if the
current user is allowed to access the specified ublk char device, for
running the permission check, path of the ublk char device has to be
provided by these commands.
Also add one control of command UBLK_CMD_GET_DEV_INFO2 which always
include the char dev path in payload since userspace may not have
knowledge if this device is created in unprivileged mode.
For applying this mechanism, system administrator needs to take
the following policies:
1) chmod 0666 /dev/ublk-control
2) change ownership of ublkcN & ublkbN
- chown owner_uid:owner_gid /dev/ublkcN
- chown owner_uid:owner_gid /dev/ublkbN
Both can be done via one simple udev rule.
Userspace:
https://github.com/ming1/ubdsrv/tree/unprivileged-ublk
'ublk add -t $TYPE --un_privileged=1' is for creating one un-privileged
ublk device if the user is un-privileged.
Link: https://lore.kernel.org/linux-block/YoOr6jBfgVm8GvWg@stefanha-x1.localdomain/
Suggested-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230106041711.914434-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Prepare for supporting unprivileged ublk device by limiting max number
ublk devices added. Otherwise too many ublk devices could be added by
un-trusted user, which can be thought as one DoS.
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230106041711.914434-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
