summaryrefslogtreecommitdiff
path: root/drivers/acpi/numa.c
AgeCommit message (Collapse)AuthorFilesLines
2013-03-02x86, ACPI, mm: Revert movablemem_map supportYinghai Lu1-13/+10
Tim found: WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80() Hardware name: S2600CP sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. smpboot: Booting Node 1, Processors #1 Modules linked in: Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1 Call Trace: set_cpu_sibling_map+0x279/0x449 start_secondary+0x11d/0x1e5 Don Morris reproduced on a HP z620 workstation, and bisected it to commit e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") It turns out movable_map has some problems, and it breaks several things 1. numa_init is called several times, NOT just for srat. so those nodes_clear(numa_nodes_parsed) memset(&numa_meminfo, 0, sizeof(numa_meminfo)) can not be just removed. Need to consider sequence is: numaq, srat, amd, dummy. and make fall back path working. 2. simply split acpi_numa_init to early_parse_srat. a. that early_parse_srat is NOT called for ia64, so you break ia64. b. for (i = 0; i < MAX_LOCAL_APIC; i++) set_apicid_to_node(i, NUMA_NO_NODE) still left in numa_init. So it will just clear result from early_parse_srat. it should be moved before that.... c. it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved early before override from INITRD is settled. 3. that patch TITLE is total misleading, there is NO x86 in the title, but it changes critical x86 code. It caused x86 guys did not pay attention to find the problem early. Those patches really should be routed via tip/x86/mm. 4. after that commit, following range can not use movable ram: a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed? b. initrd... it will be freed after booting, so it could be on movable... c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G anymore. d. init_mem_mapping: can not put page table high anymore. e. initmem_init: vmemmap can not be high local node anymore. That is not good. If node is hotplugable, the mem related range like page table and vmemmap could be on the that node without problem and should be on that node. We have workaround patch that could fix some problems, but some can not be fixed. So just remove that offending commit and related ones including: f7210e6c4ac7 ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to protect movablecore_map in memblock_overlaps_region().") 01a178a94e8e ("acpi, memory-hotplug: support getting hotplug info from SRAT") 27168d38fa20 ("acpi, memory-hotplug: extend movablemem_map ranges to the end of node") e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") fb06bc8e5f42 ("page_alloc: bootmem limit with movablecore_map") 42f47e27e761 ("page_alloc: make movablemem_map have higher priority") 6981ec31146c ("page_alloc: introduce zone_movable_limit[] to keep movable limit for nodes") 34b71f1e04fc ("page_alloc: add movable_memmap kernel parameter") 4d59a75125d5 ("x86: get pg_data_t's memory from other node") Later we should have patches that will make sure kernel put page table and vmemmap on local node ram instead of push them down to node0. Also need to find way to put other kernel used ram to local node ram. Reported-by: Tim Gardner <tim.gardner@canonical.com> Reported-by: Don Morris <don.morris@hp.com> Bisected-by: Don Morris <don.morris@hp.com> Tested-by: Don Morris <don.morris@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-23acpi, memory-hotplug: parse SRAT before memblock is readyTang Chen1-10/+13
On linux, the pages used by kernel could not be migrated. As a result, if a memory range is used by kernel, it cannot be hot-removed. So if we want to hot-remove memory, we should prevent kernel from using it. The way now used to prevent this is specify a memory range by movablemem_map boot option and set it as ZONE_MOVABLE. But when the system is booting, memblock will allocate memory, and reserve the memory for kernel. And before we parse SRAT, and know the node memory ranges, memblock is working. And it may allocate memory in ranges to be set as ZONE_MOVABLE. This memory can be used by kernel, and never be freed. So, let's parse SRAT before memblock is called first. And it is early enough. The first call of memblock_find_in_range_node() is in: setup_arch() |-->setup_real_mode() so, this patch add a function early_parse_srat() to parse SRAT, and call it before setup_real_mode() is called. NOTE: 1) early_parse_srat() is called before numa_init(), and has initialized numa_meminfo. So DO NOT clear numa_nodes_parsed in numa_init() and DO NOT zero numa_meminfo in numa_init(), otherwise we will lose memory numa info. 2) I don't know why using count of memory affinities parsed from SRAT as a return value in original acpi_numa_init(). So I add a static variable srat_mem_cnt to remember this count and use it as the return value of the new acpi_numa_init() [mhocko@suse.cz: parse SRAT before memblock is ready fix] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Wen Congyang <wency@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-15Merge branch 'acpi-assorted'Rafael J. Wysocki1-2/+4
* acpi-assorted: ACPI: Add DMI entry for Sony VGN-FW41E_H ACPI: fix obsolete comment in custom_method.c ACPI / thermal: Use mode to enable/disable kernel thermal processing ACPI thermal: remove unnecessary newline from exception message ACPI sysfs: remove unnecessary newline from exception ACPI video: remove unnecessary newline from error messages ACPI: SRAT: report non-volatile memory in debug ACPI: Rework acpi_get_child() to be more efficient
2013-01-26ACPI: SRAT: report non-volatile memory in debugDavidlohr Bueso1-2/+4
Just as with the other memory affinity flags, report non-volatile memory with ACPI debug. Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-01-11ACPICA: Cleanup table handler naming conflicts.Lv Zheng1-1/+1
This is a cosmetic patch only. Comparison of the resulting binary showed only line number differences. This patch does not affect the generation of the Linux binary. This patch decreases 44 lines of 20121114 divergence.diff. There are naming conflicts between Linux and ACPICA on table handlers. This patch cleans up this conflicts to reduce the source code diff between Linux and ACPICA. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-08-03ACPI: Only count valid srat memory structuresThomas Renninger1-3/+5
Otherwise you could run into: WARN_ON in numa_register_memblks(), because node_possible_map is zero References: https://bugzilla.novell.com/show_bug.cgi?id=757888 On this machine (ProLiant ML570 G3) the SRAT table contains: - No processor affinities - One memory affinity structure (which is set disabled) CC: Per Jessen <per@opensuse.org> CC: Andi Kleen <andi@firstfloor.org> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2012-08-03ACPI: Untangle a return statement for better readabilityThomas Renninger1-2/+4
No functional change. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2012-01-17ACPI: Store SRAT table revisionKurt Garloff1-0/+6
In SRAT v1, we had 8bit proximity domain (PXM) fields; SRAT v2 provides 32bits for these. The new fields were reserved before. According to the ACPI spec, the OS must disregrard reserved fields. In order to know whether or not, we must know what version the SRAT table has. This patch stores the SRAT table revision for later consumption by arch specific __init functions. Signed-off-by: Kurt Garloff <kurt@garloff.de> Signed-off-by: Len Brown <len.brown@intel.com>
2011-02-16x86-64, NUMA: Unify {acpi|amd}_{numa_init|scan_nodes}() arguments and return ↵Tejun Heo1-3/+6
values The functions used during NUMA initialization - *_numa_init() and *_scan_nodes() - have different arguments and return values. Unify them such that they all take no argument and return 0 on success and -errno on failure. This is in preparation for further NUMA init cleanups. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Brian Gerst <brgerst@gmail.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Shaohui Zheng <shaohui.zheng@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@linux.intel.com>
2011-01-12x86, ia64, acpi: Clean up x86-ism in drivers/acpi/numa.cTony Luck1-6/+2
As pointed out by Linus CONFIG_X86 in drivers/acpi/numa.c is ugly. Builds and boots on ia64 (both normally and with maxcpus=8 to limit the number of cpus). Signed-off-by: Tony Luck <tony.luck@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Len Brown <len.brown@intel.com> LKML-Reference: <4D2D6B5D.4080208@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-12-23x86, acpi: Parse all SRAT cpu entries even above the cpu number limitationYinghai Lu1-2/+12
Recent Intel new system have different order in MADT, aka will list all thread0 at first, then all thread1. But SRAT table still old order, it will list cpus in one socket all together. If the user have compiled limited NR_CPUS or boot with nr_cpus=, could have missed to put some cpus apic id to node mapping into apicid_to_node[]. for example for 4 sockets system with 64 cpus with nr_cpus=32 will get crash... [ 9.106288] Total of 32 processors activated (136190.88 BogoMIPS). [ 9.235021] divide error: 0000 [#1] SMP [ 9.235315] last sysfs file: [ 9.235481] CPU 1 [ 9.235592] Modules linked in: [ 9.245398] [ 9.245478] Pid: 2, comm: kthreadd Not tainted 2.6.37-rc1-tip-yh-01782-ge92ef79-dirty #274 /Sun Fire x4800 [ 9.265415] RIP: 0010:[<ffffffff81075a8f>] [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623 ... [ 9.645938] RIP [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623 [ 9.665356] RSP <ffff88103f8d1c40> [ 9.665568] ---[ end trace 2296156d35fdfc87 ]--- So let just parse all cpu entries in SRAT. Also add apicid checking with MAX_LOCAL_APIC, in case We could out of boundaries of apicid_to_node[]. it fixes following bug too. https://bugzilla.kernel.org/show_bug.cgi?id=22662 -v2: expand to 32bit according to hpa need to add MAX_LOCAL_APIC for 32bit Reported-and-Tested-by: Wu Fengguang <fengguang.wu@intel.com> Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Tested-by: Myron Stowe <myron.stowe@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4D0AD486.9020704@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-08-15gcc-4.6: ACPI: fix unused but set variables in ACPIAndi Kleen1-3/+1
Some minor improvements in error handling, but overall it was mostly dead code. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-04ACPI: NUMA: map pxms to low node idsDavid Rientjes1-2/+4
pxms are mapped to low node ids to maintain generic kernel use of functions such as pxm_to_node() that are used to determine device affinity. Otherwise, there is no pxm-to-node and node-to-pxm matching rule for x86_64 users of NUMA emulation where a single pxm may be bound to multiple NUMA nodes. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Len Brown <len.brown@intel.com>
2010-02-17smp: Use nr_cpus= to set nr_cpu_ids earlyYinghai Lu1-2/+2
On x86, before prefill_possible_map(), nr_cpu_ids will be NR_CPUS aka CONFIG_NR_CPUS. Add nr_cpus= to set nr_cpu_ids. so we can simulate cpus <=8 are installed on normal config. -v2: accordging to Christoph, acpi_numa_init should use nr_cpu_ids in stead of NR_CPUS. -v3: add doc in kernel-parameters.txt according to Andrew. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <1265793639-15071-34-git-send-email-yinghai@kernel.org> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: Tony Luck <tony.luck@intel.com>
2009-12-16Merge branch 'misc-2.6.33' into releaseLen Brown1-15/+6
2009-12-16ACPI: remove NID_INVALDavid Rientjes1-15/+6
NUMA_NO_NODE has been exported globally and thus it can replace NID_INVAL in the acpi code. Also removes the unused acpi_unmap_pxm_to_node() function. [akpm@linux-foundation.org: coding-style fixes] Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-10-12x86: Export srat physical topologyDavid Rientjes1-4/+6
This is the counterpart to "x86: export k8 physical topology" for SRAT. It is not as invasive because the acpi code already seperates node setup into detection and registration steps, with the exception of registering e820 active regions in acpi_numa_memory_affinity_init(). This is now moved to acpi_scan_nodes() if NUMA emulation is disabled or deferred. acpi_numa_init() now returns a value which specifies whether an underlying SRAT was located. If so, that topology can be used by the emulation code to interleave emulated nodes over physical nodes or to register the nodes for ACPI. acpi_get_nodes() may now be used to export the srat physical topology of the machine for NUMA emulation. Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Balbir Singh <balbir@linux.vnet.ibm.com> Cc: Ankita Garg <ankita@in.ibm.com> Cc: Len Brown <len.brown@intel.com> LKML-Reference: <alpine.DEB.1.00.0909251518580.14754@chino.kir.corp.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-28ACPI: Move definition of PREFIX from acpi_bus.h to internal..hLen Brown1-0/+2
Linux/ACPI core files using internal.h all PREFIX "ACPI: ", however, not all ACPI drivers use/want it -- and they should not have to #undef PREFIX to define their own. Add GPL commment to internal.h while we are there. This does not change any actual console output, asside from a whitespace fix. Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-03x86, ACPI: add support for x2apic ACPI extensionsSuresh Siddha1-1/+45
All logical processors with APIC ID values of 255 and greater will have their APIC reported through Processor X2APIC structure (type-9 entry type) and all logical processors with APIC ID less than 255 will have their APIC reported through legacy Processor Local APIC (type-0 entry type) only. This is the same case even for NMI structure reporting. The Processor X2APIC Affinity structure provides the association between the X2APIC ID of a logical processor and the proximity domain to which the logical processor belongs. For OSPM, Procssor IDs outside the 0-254 range are to be declared as Device() objects in the ACPI namespace. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-16acpi: check for pxm_to_node_map overflowCyrill Gorcunov1-1/+1
It is hardly (if ever) possible but in case of broken _PXM entry we could reach out of pxm_to_node_map array bounds in acpi_map_pxm_to_node() call. Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-12-31ACPI: remove private acpica headers from driver filesLin Ming1-1/+0
External driver files should not include any private acpica headers. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-11ACPI: Change acpi_evaluate_integer to support 64-bit on 32-bit kernelsMatthew Wilcox1-1/+1
As of version 2.0, ACPI can return 64-bit integers. The current acpi_evaluate_integer only supports 64-bit integers on 64-bit platforms. Change the argument to take a pointer to an acpi_integer so we support 64-bit integers on all platforms. lenb: replaced use of "acpi_integer" with "unsigned long long" lenb: fixed bug in acpi_thermal_trips_update() Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-07-16ACPICA: Update DMAR and SRAT table definitionsBob Moore1-2/+2
Synchronized tables with current specifications. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Andi Kleen <ak@linux.intel.com>
2008-06-11ACPI: handle invalid ACPI SLIT tableFenghua Yu1-4/+27
This is a SLIT sanity checking patch. It moves slit_valid() function to generic ACPI code and does sanity checking for both x86 and ia64. It sets up node_distance with LOCAL_DISTANCE and REMOTE_DISTANCE when hitting invalid SLIT table on ia64. It also cleans up unused variable localities in acpi_parse_slit() on x86. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-07ACPI: misc cleanupsAdrian Bunk1-1/+2
This patch contains the following possible cleanups: - make the following needlessly global code static: - drivers/acpi/bay.c:dev_attr_eject - drivers/acpi/bay.c:dev_attr_present - drivers/acpi/dock.c:dev_attr_docked - drivers/acpi/dock.c:dev_attr_flags - drivers/acpi/dock.c:dev_attr_uid - drivers/acpi/dock.c:dev_attr_undock - drivers/acpi/pci_bind.c:acpi_pci_unbind() - drivers/acpi/pci_link.c:acpi_link_lock - drivers/acpi/sbs.c:acpi_sbs_callback() - drivers/acpi/sbshc.c:acpi_smbus_transaction() - drivers/acpi/sleep/main.c:acpi_sleep_prepare() - #if 0 the following unused global functions: - drivers/acpi/numa.c:acpi_unmap_pxm_to_node() - remove the following unused EXPORT_SYMBOL's: - acpi_register_gsi - acpi_unregister_gsi - acpi_strict - acpi_bus_receive_event - register_acpi_bus_type - unregister_acpi_bus_type - acpi_os_printf - acpi_os_sleep - acpi_os_stall - acpi_os_read_pci_configuration - acpi_os_create_semaphore - acpi_os_delete_semaphore - acpi_os_wait_semaphore - acpi_os_signal_semaphore - acpi_os_signal - acpi_pci_irq_enable - acpi_get_pxm Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2007-12-13ACPI: fix modpost warningsJan Beulich1-2/+2
for sn2_defconfig: WARNING: vmlinux.o(.text+0x4b8601): Section mismatch: reference to .init.data:node_to_pxm_map (between '__acpi_map_pxm_to_node' and 'acpi_get_pxm') WARNING: vmlinux.o(.text+0x4b8741): Section mismatch: reference to .init.data:pxm_to_node_map (between 'acpi_map_pxm_to_node' and 'acpi_get_node') Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-07-21x86_64: fake pxm-to-node mapping for fake numaDavid Rientjes1-4/+7
For NUMA emulation, our SLIT should represent the true NUMA topology of the system but our proximity domain to node ID mapping needs to reflect the emulated state. When NUMA emulation has successfully setup fake nodes on the system, a new function, acpi_fake_nodes() is called. This function determines the proximity domain (_PXM) for each true node found on the system. It then finds which emulated nodes have been allocated on this true node as determined by its starting address. The node ID to PXM mapping is changed so that each fake node ID points to the PXM of the true node that it is located on. If the machine failed to register a SLIT, then we assume there is no special requirement for emulated node affinity so we use the default LOCAL_DISTANCE, which is newly exported to this code, as our measurement if the emulated nodes appear in the same PXM. Otherwise, we use REMOTE_DISTANCE. PXM_INVAL and NID_INVAL are also exported to the ACPI header file so that we can compare node_to_pxm() results in generic code (in this case, the SRAT code). Cc: Len Brown <lenb@kernel.org> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-21x86_64: various cleanups in NUMA scan nodeDavid Rientjes1-10/+10
In acpi_scan_nodes(), we immediately return -1 if acpi_numa <= 0, meaning we haven't detected any underlying ACPI topology or we have explicitly disabled its use from the command-line with numa=noacpi. acpi_table_print_srat_entry() and acpi_table_parse_srat() are only referenced within drivers/acpi/numa.c, so we can mark them as static and remove their prototypes from the header file. Likewise, pxm_to_node_map[] and node_to_pxm_map[] are only used within drivers/acpi/numa.c, so we mark them as static and remove their externs from the header file. The automatic 'result' variable is unused in acpi_numa_init(), so it's removed. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-06-02ACPI: Section mismatch ... acpi_map_pxm_to_nodeLuck, Tony1-1/+1
Last of the "Section mismatch" errors from ia64 builds! acpi_map_pxm_to_node() is defined with attribute __cpuinit, but is called by "normal" kernel functions acpi_getnode() and acpi_map_cpu2node(). Commit f363d16fbb9374c0bd7f2757d412c287169094c9 moved the data structures on which this routine operates from __cpuinitdata to regular memory, so this routine can also move out of init space. Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-17acpi: fix potential call to a freed memory section.Aaron Durbin1-4/+4
Strip __cpuinit[data] from Node <-> PXM routines and supporting data structures. Also make pxm_to_node_map and node_to_pxm_map local to the numa acpi module. This fixes a bug triggered by the following conditions: - boot on a machine with a SLIT table defined - kernel is configured w/ CONFIG_HOTPLUG_CPU=n - cat /sys/devices/system/node/node*/distance This will cause an oops by calling into a freed memory section. In particular, on x86_64, __node_distance calls node_to_pxm(). Signed-off-by: Aaron Durbin <adurbin@google.com> Cc: Len Brown <lenb@kernel.org> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Fix unnecesary meminitYasunori Goto1-2/+2
This is to fix unnecessary __meminit definition. These are exported for kernel modules. I compiled on ia64/x86-64 with memory hotplug on/off. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08Fix section mismatch of memory hotplug related code.Yasunori Goto1-2/+2
This is to fix many section mismatches of code related to memory hotplug. I checked compile with memory hotplug on/off on ia64 and x86-64 box. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-13ACPI: acpi_table_parse_madt_family() is not MADT specificLen Brown1-7/+1
acpi_table_parse_madt_family() is also used to parse SRAT entries. So re-name it to acpi_table_parse_entries(), and re-name the madt-specific variables within it accordingly. cosmetic only. Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-13ACPI: acpi_madt_entry_handler() is not MADT specificLen Brown1-2/+2
acpi_madt_entry_handler() is also used for the SRAT, so re-name it acpi_table_entry_handler(). cosmetic only. Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-13ACPI: acpi_table_parse() now returns success/fail, not countLen Brown1-4/+2
Returning count for tables that are supposed to be unique was useless and confusing. Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-12ACPI: clean up ACPI_MODULE_NAME() useLen Brown1-1/+1
cosmetic only Make "module name" actually match the file name. Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care. Fix indentation where Lindent did get confused. Signed-off-by: Len Brown <len.brown@intel.com>
2007-02-02ACPICA: Remove duplicate table definitions (non-conflicting), contAlexey Starikovskiy1-39/+38
Signed-off-by: Len Brown <len.brown@intel.com>
2006-10-14ACPI: Remove unnecessary from/to-void* and to-void casts in drivers/acpiJan Engelhardt1-1/+1
Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-01ACPI: remove function tracing macros from drivers/acpi/*.cLen Brown1-3/+1
a few invocations appeared due to the SBS and other patches. Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel1-1/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-27[PATCH] pgdat allocation for new node add (get node id by acpi)Yasunori Goto1-1/+14
This is to find node id from acpi's handle of memory_device in DSDT. _PXM for the new node can be found by acpi_get_pxm() by using new memory's handle. So, node id can be found by pxm_to_nid_map[]. This patch becomes simpler than v2 of node hot-add patch. Because old add_memory() function doesn't have node id parameter. So, kernel must find its handle by physical address via DSDT again. But, v3 just give node id to add_memory() now. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23[PATCH] Unify pxm_to_node() and node_to_pxm()Yasunori Goto1-0/+48
Consolidate the various arch-specific implementations of pxm_to_node() and node_to_pxm() into a single generic version. Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-05[ACPI] Lindent all ACPI filesLen Brown1-64/+61
Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds1-0/+213
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 19:33:28 +0000