summaryrefslogtreecommitdiff
path: root/drivers/accel
AgeCommit message (Collapse)AuthorFilesLines
2023-12-11accel/ivpu/37xx: Fix interrupt_clear_with_0 WA initializationAndrzej Kacprowski1-3/+9
Using PCI Device ID/Revision to initialize the interrupt_clear_with_0 workaround is problematic - there are many pre-production steppings with different behavior, even with the same PCI ID/Revision Instead of checking for PCI Device ID/Revision, check the VPU buttress interrupt status register behavior - if this register is not zero after writing 1s it means there register is RW instead of RW1C and we need to enable the interrupt_clear_with_0 workaround. Fixes: 7f34e01f77f8 ("accel/ivpu: Clear specific interrupt status bits on C0") Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/all/20231204122331.40560-1-jacek.lawrynowicz@linux.intel.com
2023-11-21accel/ivpu/37xx: Fix hangs related to MMIO resetJacek Lawrynowicz1-24/+22
There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET register. IP will be reset by FLR or by entering d0i3. Also IP reset during power_up is not needed as the VPU is already in reset. Removing MMIO reset improves stability as it a partial device reset that is not safe in some corner cases. This change also brings back ivpu_boot_pwr_domain_disable() that helps to properly power down VPU when it is hung by a buggy workload. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR") Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com
2023-11-15accel/ivpu: avoid build failure with CONFIG_PM=nArnd Bergmann1-3/+0
The usage count of struct dev_pm_info is an implementation detail that is only available if CONFIG_PM is enabled, so printing it in a debug message causes a build failure in configurations without PM: In file included from include/linux/device.h:15, from include/linux/pci.h:37, from drivers/accel/ivpu/ivpu_pm.c:8: drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active': drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count' 254 | atomic_read(&vdev->drm.dev->power.usage_count)); | ^ include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk' 129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg' 75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \ | ^~~~~~~ drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg' 253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n", | ^~~~~~~~ The print message does not seem essential, so the easiest workaround is to just remove it. Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org (cherry picked from commit 1470acbef122c7e2e588f6346ce459c26d0568a2) Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2023-11-02Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "As usual, lots of singleton and doubleton patches all over the tree and there's little I can say which isn't in the individual changelogs. The lengthier patch series are - 'kdump: use generic functions to simplify crashkernel reservation in arch', from Baoquan He. This is mainly cleanups and consolidation of the 'crashkernel=' kernel parameter handling - After much discussion, David Laight's 'minmax: Relax type checks in min() and max()' is here. Hopefully reduces some typecasting and the use of min_t() and max_t() - A group of patches from Oleg Nesterov which clean up and slightly fix our handling of reads from /proc/PID/task/... and which remove task_struct.thread_group" * tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits) scripts/gdb/vmalloc: disable on no-MMU scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n .mailmap: add address mapping for Tomeu Vizoso mailmap: update email address for Claudiu Beznea tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions .mailmap: map Benjamin Poirier's address scripts/gdb: add lx_current support for riscv ocfs2: fix a spelling typo in comment proc: test ProtectionKey in proc-empty-vm test proc: fix proc-empty-vm test with vsyscall fs/proc/base.c: remove unneeded semicolon do_io_accounting: use sig->stats_lock do_io_accounting: use __for_each_thread() ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error() ocfs2: fix a typo in a comment scripts/show_delta: add __main__ judgement before main code treewide: mark stuff as __ro_after_init fs: ocfs2: check status values proc: test /proc/${pid}/statm compiler.h: move __is_constexpr() to compiler.h ...
2023-11-01Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds54-3713/+2482
Pull drm updates from Dave Airlie: "Highlights: - AMD adds some more upcoming HW platforms - Intel made Meteorlake stable and started adding Lunarlake - nouveau has a bunch of display rework in prepartion for the NVIDIA GSP firmware support - msm adds a7xx support - habanalabs has finished migration to accel subsystem Detail summary: kernel: - add initial vmemdup-user-array core: - fix platform remove() to return void - drm_file owner updated to reflect owner - move size calcs to drm buddy allocator - let GPUVM build as a module - allow variable number of run-queues in scheduler edid: - handle bad h/v sync_end in EDIDs panfrost: - add Boris as maintainer fbdev: - use fb_ops helpers more - only allow logo use from fbcon - rename fb_pgproto to pgprot_framebuffer - add HPD state to drm_connector_oob_hotplug_event - convert to fbdev i/o mem helpers i915: - Enable meteorlake by default - Early Xe2 LPD/Lunarlake display enablement - Rework subplatforms into IP version checks - GuC based TLB invalidation for Meteorlake - Display rework for future Xe driver integration - LNL FBC features - LNL display feature capability reads - update recommended fw versions for DG2+ - drop fastboot module parameter - added deviceid for Arrowlake-S - drop preproduction workarounds - don't disable preemption for resets - cleanup inlines in headers - PXP firmware loading fix - Fix sg list lengths - DSC PPS state readout/verification - Add more RPL P/U PCI IDs - Add new DG2-G12 stepping - DP enhanced framing support to state checker - Improve shared link bandwidth management - stop using GEM macros in display code - refactor related code into display code - locally enable W=1 warnings - remove PSR watchdog timers on LNL amdgpu: - RAS/FRU EEPROM updatse - IP discovery updatses - GC 11.5 support - DCN 3.5 support - VPE 6.1 support - NBIO 7.11 support - DML2 support - lots of IP updates - use flexible arrays for bo list handling - W=1 fixes - Enable seamless boot in more cases - Enable context type property for HDMI - Rework GPUVM TLB flushing - VCN IB start/size alignment fixes amdkfd: - GC 10/11 fixes - GC 11.5 support - use partial migration in GPU faults radeon: - W=1 Fixes - fix some possible buffer overflow/NULL derefs nouveau: - update uapi for NO_PREFETCH - scheduler/fence fixes - rework suspend/resume for GSP-RM - rework display in preparation for GSP-RM habanalabs: - uapi: expose tsc clock - uapi: block access to eventfd through control device - uapi: force dma-buf export to PAGE_SIZE alignments - complete move to accel subsystem - move firmware interface include files - perform hard reset on PCIe AXI drain event - optimise user interrupt handling msm: - DP: use existing helpers for DPCD - DPU: interrupts reworked - gpu: a7xx (a730/a740) support - decouple msm_drv from kms for headless devices mediatek: - MT8188 dsi/dp/edp support - DDP GAMMA - 12 bit LUT support - connector dynamic selection capability rockchip: - rv1126 mipi-dsi/vop support - add planar formats ast: - rename constants panels: - Mitsubishi AA084XE01 - JDI LPM102A188A - LTK050H3148W-CTA6 ivpu: - power management fixes qaic: - add detach slice bo api komeda: - add NV12 writeback tegra: - support NVSYNC/NHSYNC - host1x suspend fixes ili9882t: - separate into own driver" * tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits) drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo drm/amdgpu: Remove duplicate fdinfo fields drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table drm/amdgpu: Identify data parity error corrected in replay mode drm/amdgpu: Fix typo in IP discovery parsing drm/amd/display: fix S/G display enablement drm/amdxcp: fix amdxcp unloads incompletely drm/amd/amdgpu: fix the GPU power print error in pm info drm/amdgpu: Use pcie domain of xcc acpi objects drm/amd: check num of link levels when update pcie param drm/amdgpu: Add a read to GFX v9.4.3 ring test drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported. drm/amdgpu: get RAS poison status from DF v4_6_2 drm/amdgpu: Use discovery table's subrevision drm/amd/display: 3.2.256 drm/amd/display: add interface to query SubVP status drm/amd/display: Read before writing Backlight Mode Set Register drm/amd/display: Disable SYMCLK32_SE RCO on DCN314 ...
2023-10-30Merge tag 'hardening-v6.7-rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "One of the more voluminous set of changes is for adding the new __counted_by annotation[1] to gain run-time bounds checking of dynamically sized arrays with UBSan. - Add LKDTM test for stuck CPUs (Mark Rutland) - Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo) - Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva) - Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh) - Convert group_info.usage to refcount_t (Elena Reshetova) - Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva) - Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn) - Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook) - Fix strtomem() compile-time check for small sources (Kees Cook)" * tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits) hwmon: (acpi_power_meter) replace open-coded kmemdup_nul reset: Annotate struct reset_control_array with __counted_by kexec: Annotate struct crash_mem with __counted_by virtio_console: Annotate struct port_buffer with __counted_by ima: Add __counted_by for struct modsig and use struct_size() MAINTAINERS: Include stackleak paths in hardening entry string: Adjust strtomem() logic to allow for smaller sources hardening: x86: drop reference to removed config AMD_IOMMU_V2 randstruct: Fix gcc-plugin performance mode to stay in group mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by irqchip/imx-intmux: Annotate struct intmux_data with __counted_by KVM: Annotate struct kvm_irq_routing_table with __counted_by virt: acrn: Annotate struct vm_memory_region_batch with __counted_by hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by sparc: Annotate struct cpuinfo_tree with __counted_by isdn: kcapi: replace deprecated strncpy with strscpy_pad isdn: replace deprecated strncpy with strscpy NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by ...
2023-10-31Merge tag 'drm-misc-next-2023-10-27' of ↵Dave Airlie16-163/+240
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.7-rc1: drm-misc-next-2023-10-19 + following: UAPI Changes: Cross-subsystem Changes: - Convert fbdev drivers to use fbdev i/o mem helpers. Core Changes: - Use cross-references for macros in docs. - Make drm_client_buffer_addb use addfb2. - Add NV20 and NV30 YUV formats. - Documentation updates for create_dumb ioctl. - CI fixes. - Allow variable number of run-queues in scheduler. Driver Changes: - Rename drm/ast constants. - Make ili9882t its own driver. - Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu. - Add planar formats to rockchip. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
2023-10-26accel/ivpu/37xx: Fix missing VPUIP interruptsdrm-misc-fixes-2023-10-26Karol Wachowski1-6/+5
Move sequence of masking and unmasking global interrupts from buttress interrupt handler to generic one that handles both VPUIP and BTRS interrupts. Unmasking global interrupts will re-trigger MSI for any pending interrupts. Lack of this sequence will cause the driver to miss any VPUIP interrupt that comes after reading VPU_37XX_HOST_SS_ICB_STATUS_0 and before clearing all active interrupt sources. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Cc: stable@vger.kernel.org Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231024161952.759914-1-stanislaw.gruszka@linux.intel.com
2023-10-23BackMerge tag 'v6.6-rc7' into drm-nextDave Airlie10-22/+58
This is needed to add the msm pr which is based on a higher base. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-10-23accel/ivpu: Delete the TODO fileDeepak R Varma1-11/+0
The work items listed in the TODO file of this driver file are either completed or dropped. The file is no more significant according to the maintainers. Hence removing it from the sources. Suggested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Deepak R Varma <drv@mailo.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZTAucrOT69/tQK2o@runicha.com
2023-10-23accel/ivpu/37xx: Remove support for FPGA and simicsStanislaw Gruszka1-49/+8
We do not run 37xx VPU on non-silicon platforms any longer. Remove deprecated code to make it cleaner. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-7-stanislaw.gruszka@linux.intel.com
2023-10-23accel/ivpu: Do not initialize parameters on power upStanislaw Gruszka2-8/+8
Initialize HW specific parameters only once. We do not have to do this on every power_up (performed during initialization and on resume). Move corresponding code to ->info_init() Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-6-stanislaw.gruszka@linux.intel.com
2023-10-23accel/ivpu: Print IPC type string instead of numberKrystian Pradzynski3-4/+71
Introduce ivpu_jsm_msg_type_to_str() helper to print type of IPC message. This will make reading logs and debugging IPC issues easier. Co-developed-by: Maciej Falkowski <maciej.falkowski@intel.com> Signed-off-by: Maciej Falkowski <maciej.falkowski@intel.com> Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-5-stanislaw.gruszka@linux.intel.com
2023-10-23accel/ivpu: Read clock rate only if device is upKarol Wachowski3-1/+31
Do not unnecessarily wake up device to read clock rate. Return 0 as clk_rate if device is suspended. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-4-stanislaw.gruszka@linux.intel.com
2023-10-23accel/ivpu: Fix verbose version of REG_POLL macrosKrystian Pradzynski2-31/+48
Remove two out of four _POLL macros. For two remaining _POLL macros add message about polling register start and finish. Additionally avoid inconsequence when using REGV_WR/RD macros in MMU code - passing raw register offset instead of register name. Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-3-stanislaw.gruszka@linux.intel.com
2023-10-23accel/ivpu: Use ratelimited warn and err in IPC/JSMKrystian Pradzynski2-21/+26
Quite often during test corner cases IPC, JSM functions can flood dmesg with warn or err messages. With that lost dmesg history. Change warn, err to ratelimited versions in IPC, JSM to suppress dmesg spam occurrence during fail test scenarios. Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-2-stanislaw.gruszka@linux.intel.com
2023-10-19accel/ivpu: Extend address range for MMU mmapdrm-misc-fixes-2023-10-19Wludzik, Jozef1-6/+3
Allow to use whole address range in MMU context mmap which is up to 48 bits. Return invalid argument from MMU context mmap in case address is not aligned to MMU page size, address is below MMU page size or address is greater then 47 bits. This fixes problem disallowing to run large models on VPU4 Signed-off-by: Wludzik, Jozef <jozef.wludzik@intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231018110113.547208-1-stanislaw.gruszka@linux.intel.com
2023-10-19Revert "accel/ivpu: Use cached buffers for FW loading"Stanislaw Gruszka2-10/+4
This reverts commit 645d694559cab36fe6a57c717efcfa27d9321396. The commit cause issues with memory access from the device side. Switch back to write-combined memory mappings until the issues will be properly addressed. Add extra wmb() needed when boot_params->save_restore_ret_address() is modified. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231017121353.532466-1-stanislaw.gruszka@linux.intel.com
2023-10-19accel/ivpu: Don't enter d0i3 during FLRJacek Lawrynowicz6-4/+21
Avoid HW bug on some platforms where we enter D0i3 state and CPU is in low power states (C8 or above). Fixes: 852be13f3bd3 ("accel/ivpu: Add PM support") Cc: stable@vger.kernel.org Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231003064213.1527327-1-stanislaw.gruszka@linux.intel.com
2023-10-17Merge tag 'drm-habanalabs-next-2023-10-10' of ↵Dave Airlie27-3139/+1726
https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next This tag contains habanalabs driver changes for v6.7. The notable changes are: - uAPI changes: - Expose tsc clock sampling to better sync clock information in profiler. - Enhance engine error reporting in the info ioctl. - Block access to the eventfd operations through the control device. - Disable the option of the user to register multiple times with the same offset for timestamp dump by the driver. If a user wants to use the same offset in the timestamp buffer for different interrupt, it needs to first de-register the offset. - When exporting dma-buf (for p2p), force the user to specify size/offset in multiples of PAGE_SIZE. This is instead of the driver doing the rounding to PAGE_SIZE, which has caused the driver to map more memory than was intended by the user. - New features and improvements: - Complete the move of the driver to the accel subsystem by removing the custom habanalabs class and major and registering to accel subsystem. - Move the firmware interface files to include/linux/habanalabs. This is a pre-requisite for upstreaming the NIC drivers of Gaudi (as they need to include those files). - Perform device hard-reset upon PCIe AXI drain event to prevent the failure from cascading to different IP blocks in the SoC. In secured environments, this is done automatically by the firmware. - Print device name when it is removed for better debuggability. - Add support for trace of dma map sgtable operations. - Optimize handling of user interrupts by splitting the interrupts to two lists. One list for fast handling and second list for handling with timestamp recording, which is slower. - Prevent double device hard-reset due to 2 adjacent H/W events. - Set device status 'malfunction' while in rmmod. - Firmware related fixes: - Extend preboot timeout because preboot loading might take longer than expected in certain cases. - Add a protection mechanism for the Event Queue. In case it is full, the firmware will be able to notify about it through a dedicated interrupt. - Perform device hard-reset in case scrubbing of memory has failed. - Bug fixes and code cleanups: - Small fixes of dma-buf handling in Gaudi2, such as handling an offset != 0, using the correct exported size, creation of sg table. - Fix spmu mask creation. - Fix bug in wait for cs completion for decoder workloads. - Cleanup Greco name from documentation. - Fix bug in recording timestamp during cs completion interrupt handling. - Fix CoreSight ETF configuration and flush logic. - Fix small bug in hpriv_list handling (the list that contains the private data per process that opens our device). Signed-off-by: Dave Airlie <airlied@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEE7TEboABC71LctBLFZR1NuKta54AFAmUlHoQACgkQZR1NuKta # 54DsXQf8CW+W4iWJf5UDTj/E/giu9rVRrsUsU0hhCcXbecIxRsLObYXtulENu5/u # VuEAo/tAvo0LUKi8pdIv6ernDKaxZ1+fimlfXMCzllAA/ts3yp1NgunprsIsx3tv # YgcJ2GNR8UlVZ1qYuZl+4dOTyD0yfRMROUXBe7wqKnUXOEepOiLBxq6W15tZiJnx # L+V0yGkNk6pAoADIXLW9EgEXiN/bJZCXGPWp06i/Nz7cHIHJGoV59wAqftqllCtk # 8ZMkLByjlQKPhc5AgWBtKE8EGVip3sm7b/Q2Gq0ZXdZiebyVJ+AjuuDOdtq1UCIw # Rcp2576E7rByIBu3RAFlrioWhuR5Zw== # =2ien # -----END PGP SIGNATURE----- # gpg: Signature made Tue 10 Oct 2023 19:51:00 AEST # gpg: using RSA key ED311BA00042EF52DCB412C5651D4DB8AB5AE780 # gpg: Can't check signature: No public key From: Oded Gabbay <ogabbay@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/ZSUfiX4J7v4Wn0cU@ogabbay-vm-u22.habana-labs.com
2023-10-12accel/ivpu: Add ivpu_bo_vaddr() and ivpu_bo_size()Jacek Lawrynowicz7-41/+51
Use: - ivpu_bo_vaddr(bo) instead of bo->kvaddr - ivpu_bo_size(bo) instead of bo->base.size This is a preparation for switch to a drm_gem_shmem_object as a base for ivpu_bo, where: - bo->kvaddr becomes bo->base.vaddr - bo->base.size becomes bo->base.base.size Using ivpu_bo_vaddr() and ivpu_bo_size() increases the readability of the code. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230901094957.168898-9-stanislaw.gruszka@linux.intel.com
2023-10-11Merge drm/drm-next into drm-misc-nextThomas Zimmermann5-24/+62
Updating drm-misc-next to the state of Linux v6.6-rc2. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
2023-10-09accel/habanalabs/gaudi2: fix spmu mask creationOded Gabbay1-1/+2
event_types_num received from the user can be 0. In that case, the event_mask should be 0. In addition, to create a correct mask we need to match the number of event types to the bit location such that bit 0 represents a single event type, bit 1 represents 2 types and so on. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs/gaudi2: perform hard-reset upon PCIe AXI drain eventTomer Tayar1-1/+1
Non-completed transactions from PCIe towards the device are handled by the AXI drain mechanism. This handling is in the PCIe level, but the transactions are still there in the device consuming some queues entries, and therefore the device must be reset. Modify to perform hard-reset upon PCIe AXI drain events. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: fix bug in decoder wait for cs completionfarah kassabri1-7/+7
The decoder interrupts are handled in the interrupt context same as all user interrupts. In such case, the wait list should be protected by spin_lock_irqsave in order to avoid deadlock that might happen with the user submission flow. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: remove wrong doc for init_phys_pg_pack_from_userptrDafna Hirschfeld1-1/+0
The function does not pin the pages so remove that from the inline doc. Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: add missing debugfs function stubsArnd Bergmann1-0/+9
Two function stubs were removed in an earlier commit but are now needed again: drivers/accel/habanalabs/common/device.c: In function 'hl_device_init': drivers/accel/habanalabs/common/device.c:2231:14: error: implicit declaration of function 'hl_debugfs_device_init'; did you mean 'drm_debugfs_dev_init'? [-Werror=implicit-function-declaration] 2231 | rc = hl_debugfs_device_init(hdev); drivers/accel/habanalabs/common/device.c:2367:9: error: implicit declaration of function 'hl_debugfs_device_fini'; did you mean 'hl_debugfs_remove_file'? [-Werror=implicit-function-declaration] 2367 | hl_debugfs_device_fini(hdev); | ^~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: minor cosmetic update to habanalabs.hOded Gabbay1-16/+15
- Update copyright years - Align fields in struct hl_userptr - Fix comments Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs/gaudi: remove define used for simulatorOded Gabbay2-4/+1
We don't support simulator in upstream. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs: remove leftover codeOded Gabbay1-6/+1
This code was added as part of a bigger feature which was never upstreamed, so remove this code. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs: print device name when it is removedOded Gabbay1-1/+1
Notifies the user which device was removed. It is important in a server with multiple devices. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs: remove unused fieldOded Gabbay1-1/+0
flags in struct wait_interrupt_data is not used anywhere so remove it. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs/gaudi: remove unused structure definitionOded Gabbay1-32/+0
struct gaudi_nic_status is not used anywhere in the code. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs: trace dma map sgtableOhad Sharabi6-20/+81
Traces the DMA [un]map_sgtable using the new traces we added. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: remove unused asic functionsOded Gabbay2-28/+0
asic_dma_{un}map_single() asic-specific functions are no longer called from the common code, so delete these functions. In addition, delete the gaudi2 implementation as they are also not called. Signed-off-by: Oded Gabbay <ogabbay@kernel.org> Reviewed-by: Ofir Bitton <obitton@habana.ai>
2023-10-09accel/habanalabs: update boot status printAriel Suller1-0/+4
FW shutdown preparation status was added to spec. Signed-off-by: Ariel Suller <asuller@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: extend preboot timeout when preboot might take longerDafna Hirschfeld4-3/+29
There are cases such when FW runs MBIST, that preboot is expected to take longer than the usual. In such cases the firmware reports status SECURITY_READY/IN_PREBOOT and we extend the timeout waiting for it. This is currently implemented for Gaudi2 only. Signed-off-by: Dafna Hirschfeld <dhirschfeld@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: add debug prints to dump content of SG table for dma-bufTomer Tayar1-0/+7
Add debug prints to dump the content of the SG table which is prepared when the dma-buf map op is called. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: add missing offset handling for dma-bufTomer Tayar2-35/+43
On devices with virtual device memory (Gaudi2 onwards), user can provide an offset within an allocated device memory from which he wants to export a dma-buf object. The offset value is verified by driver, but it is not taken into consideration when the importer driver maps the dma-buf and the SG table it prepared. Add the missing offset handling. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: set hl_dmabuf_priv.device_address only when neededTomer Tayar2-7/+7
The device_address member of 'struct hl_dmabuf_priv' is used only when virtual device memory is not supported and dma-buf is exported from address. Set the value of this field only when it is relevant, and add "phys" to its name so it would be clearer that it can't be a device virtual address. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: fix SG table creation for dma-buf mappingTomer Tayar1-95/+104
In some cases the calculated number of required entries for the dma-buf SG table is wrong. For example, if the page size is larger than both the dma max segment size of the importer device and from the exported side, or if the exported size is part of a phys_pg_pack that is composed of several pages. In these cases, redundant entries will be added to the SG table. Modify the method that the number of entries is calculated, and the way they are prepared. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: split user interrupts pending listfarah kassabri4-147/+209
Currently driver maintain one list for both pending user interrupts which seeks to wait till CQ reaches it's target value and also the ones that seeks to get timestamp records when the CQ reaches it's target value. This causes delay in handling the waiters which gets higher priority than the timestamp records. In order to solve this, let's split the list into two, one for each case and each one is protected by it's own spinlock. Waiters will be handled within the interrupt context first, then the timestamp records will be set. Freeing the timestamp related memory will be handled in a workqueue. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: optimize timestamp registration handlerfarah kassabri4-67/+179
Currently we use dynamic allocation inside the irq handler in order to allocate free node to be used for the free jobs. This operation is expensive, especially when we deal with large burst of events records that get released at the same time. The alternative is to have pre allocated pool of free nodes and just fetch nodes from this pool at irq handling time instead of allocating them. In case the pool becomes full, then the driver will fallback to dynamic allocations. As part of the optimization also update the unregister flow upon re-using a timestamp record, by making the operation much simpler and quicker. We already have the record in the registration flow and now we just seek to re-use with different interrupt. Therefore, no need to look for buffer according to the user handle. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Tomer Tayar <ttayar@habana.ai> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: fix bug in timestamp interrupt handlingfarah kassabri1-2/+3
There is a potential race between user thread seeking to re-use a timestamp record with new interrupt id, while this record is still in the middle of interrupt handling and it is about to be freed. Imagine the driver set the record in_use to 0 and only then fill the free_node information. This might lead to unpleasant scenario where the new registration thread detects the record as free to use, and change the cq buff address. That will cause the free_node to get the wrong buffer address to put refcount to. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: tiny refactor of hl_map_dmabuf()Tomer Tayar1-17/+15
alloc_sgt_from_device_pages() includes relatively many parameters, and in a subsequent change another offset parameter is going to be added. Using structure fields directly when calling this function, and in hl_map_dmabuf() it is done twice, makes it a little bit difficult to understand the meaning of the parameters. To make it clearer, assign the required values into local variables with explicit names, and use the variables when calling the function. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: export dma-buf only if size/offset multiples of PAGE_SIZETomer Tayar1-4/+11
It is currently allowed for a user to export dma-buf with size and offset that are not multiples of PAGE_SIZE. The exported memory is mapped for the importer device, and there it will be rounded to PAGE_SIZE, leading to actually exporting more than the user intended to. To make the user be aware of it, accept only size and offset which are multiple of PAGE_SIZE. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: use exported size from dma_buf and not from phys_pg_packTomer Tayar2-4/+1
The 'exported_size' member in 'struct hl_vm_phys_pg_pack' is used to keep the exported dma-buf size, to be later used when the buffer is mapped. However it is possible that the same phys_pg_pack will be exported more than once, and independently of when the mapping takes place. Remove this member from the phys_pg_pack structure, and simply use the size in the dma-buf object as the exported size when mapping. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: always pass exported size to alloc_sgt_from_device_pages()Tomer Tayar1-3/+2
For Gaudi1 the exported dma-buf is always composed of a single page, and therefore the exported size is equal to this page's size. When calling alloc_sgt_from_device_pages(), we pass 0 as the exported size and internally calculate it as "number of pages * page size". This makes alloc_sgt_from_device_pages() less clear, because the exported size parameter is not understood as a restriction on the pages' size. Modify to always pass the exported size explicitly. Signed-off-by: Tomer Tayar <ttayar@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs: prevent sending heartbeat before events are enabledfarah kassabri1-7/+3
After the heartbeat mechanism is now expanded to be used also for EQ health check, we shouldn't send heartbeat messages to FW before driver allow events to be received from FW. Because if the driver will send two heartbeats before it enables events to be received from FW, then the EQ health check will fail and reset the device. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2023-10-09accel/habanalabs/gaudi2: add eq health check using irqfarah kassabri4-0/+30
This is the second patch for applying the eq health check mechanism which will add support for the interrupt flow for gaudi2 asic. More info about the interrupt mechanism: set a dedicated msix for the eq error interrupt, and add interrupt handler for it. when FW detects some issue with EQ like EQ_FULL, it'll raise that interrupt and driver should reset the device. Driver will inform the FW which msix index to use through the already existing handshake mechanism which will send msix info message to fw. Signed-off-by: farah kassabri <fkassabri@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 21:39:10 +0000