summaryrefslogtreecommitdiff
path: root/crypto
AgeCommit message (Collapse)AuthorFilesLines
2024-07-13crypto: testmgr - generate power-of-2 lengths more oftenEric Biggers1-4/+12
Implementations of hash functions often have special cases when lengths are a multiple of the hash function's internal block size (e.g. 64 for SHA-256, 128 for SHA-512). Currently, when the fuzz testing code generates lengths, it doesn't prefer any length mod 64 over any other. This limits the coverage of these special cases. Therefore, this patch updates the fuzz testing code to generate power-of-2 lengths and divide messages exactly in half a bit more often. Reviewed-by: Sami Tolvanen <samitolvanen@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-06-28crypto: deflate - Add aliases to deflateKyle Meyer1-0/+1
iaa_crypto depends on the deflate compression algorithm that's provided by deflate. If the algorithm is not available because CRYPTO_DEFLATE=m and deflate is not inserted, iaa_crypto will request "crypto-deflate-generic". Deflate will not be inserted because "crypto-deflate-generic" is not a valid alias. Add deflate-generic and crypto-deflate-generic aliases to deflate. Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-06-28crypto: tcrypt - add skcipher speed for given algSergey Portnoy1-0/+9
Allow to run skcipher speed for given algorithm. Case 600 is modified to cover ENCRYPT and DECRYPT directions. Example: modprobe tcrypt mode=600 alg="qat_aes_xts" klen=32 If succeed, the performance numbers will be printed in dmesg: testing speed of multibuffer qat_aes_xts (qat_aes_xts) encryption test 0 (256 bit key, 16 byte blocks): 1 operation in 14596 cycles (16 bytes) ... test 6 (256 bit key, 4096 byte blocks): 1 operation in 8053 cycles (4096 bytes) Signed-off-by: Sergey Portnoy <sergey.portnoy@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-06-16crypto: ecc - Fix off-by-one missing to clear most significant digitStefan Berger1-1/+1
Fix an off-by-one error where the most significant digit was not initialized leading to signature verification failures by the testmgr. Example: If a curve requires ndigits (=9) and diff (=2) indicates that 2 digits need to be set to zero then start with digit 'ndigits - diff' (=7) and clear 'diff' digits starting from there, so 7 and 8. Reported-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com> Closes: https://lore.kernel.org/linux-crypto/619bc2de-b18a-4939-a652-9ca886bf6349@linux.ibm.com/T/#m045d8812409ce233c17fcdb8b88b6629c671f9f4 Fixes: 2fd2a82ccbfc ("crypto: ecdsa - Use ecc_digits_from_bytes to create hash digits array") Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Tested-by: Venkat Rao Bagalkote <venkat88@linux.vnet.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-06-07crypto: sm2 - Remove sm2 algorithmHerbert Xu10-635/+2
The SM2 algorithm has a single user in the kernel. However, it's never been integrated properly with that user: asymmetric_keys. The crux of the issue is that the way it computes its digest with sm3 does not fit into the architecture of asymmetric_keys. As no solution has been proposed, remove this algorithm. It can be resubmitted when it is integrated properly into the asymmetric_keys subsystem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-06-07crypto: ecdsa - Use ecc_digits_from_bytes to convert signatureStefan Berger1-10/+2
Since ecc_digits_from_bytes will provide zeros when an insufficient number of bytes are passed in the input byte array, use it to convert the r and s components of the signature to digits directly from the input byte array. This avoids going through an intermediate byte array that has the first few bytes filled with zeros. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-06-07crypto: ecdsa - Use ecc_digits_from_bytes to create hash digits arrayStefan Berger1-13/+4
Since ecc_digits_from_bytes will provide zeros when an insufficient number of bytes are passed in the input byte array, use it to create the hash digits directly from the input byte array. This avoids going through an intermediate byte array (rawhash) that has the first few bytes filled with zeros. Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-06-07crypto: ecdsa - Fix the public key format descriptionJarkko Sakkinen1-3/+2
Public key blob is not just x and y concatenated. It follows RFC5480 section 2.2. Address this by re-documenting the function with the correct description of the format. Link: https://datatracker.ietf.org/doc/html/rfc5480 Fixes: 4e6602916bc6 ("crypto: ecdsa - Add support for ECDSA signature verification") Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-06-07crypto: testmgr - test setkey in no-SIMD contextEric Biggers1-5/+24
Since crypto_shash_setkey(), crypto_ahash_setkey(), crypto_skcipher_setkey(), and crypto_aead_setkey() apparently need to work in no-SIMD context on some architectures, make the self-tests cover this scenario. Specifically, sometimes do the setkey while under crypto_disable_simd_for_test(), and do this independently from disabling SIMD for the other parts of the crypto operation since there is no guarantee that all parts happen in the same context. (I.e., drivers mustn't store the key in different formats for SIMD vs. no-SIMD.) Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-31crypto: Add missing MODULE_DESCRIPTION() macrosJeff Johnson8-0/+8
Fix the 'make W=1' warnings: WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/cast_common.o WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/af_alg.o WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/algif_hash.o WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/algif_skcipher.o WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/ecc.o WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/curve25519-generic.o WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/xor.o WARNING: modpost: missing MODULE_DESCRIPTION() in crypto/crypto_simd.o Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-31crypto: api - Disable boot-test-finished if algapi is a moduleHerbert Xu3-4/+10
The boot-test-finished toggle is only necessary if algapi is built into the kernel. Do not include this code if it is a module. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-20Merge tag 'v6.10-p2' of ↵Linus Torvalds1-0/+22
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a bug in the new ecc P521 code as well as a buggy fix in qat" * tag 'v6.10-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: ecc - Prevent ecc_digits_from_bytes from reading too many bytes crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak
2024-05-18Merge tag 'net-accept-more-20240515' of git://git.kernel.dk/linuxLinus Torvalds2-10/+11
Pull more io_uring updates from Jens Axboe: "This adds support for IORING_CQE_F_SOCK_NONEMPTY for io_uring accept requests. This is very similar to previous work that enabled the same hint for doing receives on sockets. By far the majority of the work here is refactoring to enable the networking side to pass back whether or not the socket had more pending requests after accepting the current one, the last patch just wires it up for io_uring. Not only does this enable applications to know whether there are more connections to accept right now, it also enables smarter logic for io_uring multishot accept on whether to retry immediately or wait for a poll trigger" * tag 'net-accept-more-20240515' of git://git.kernel.dk/linux: io_uring/net: wire up IORING_CQE_F_SOCK_NONEMPTY for accept net: pass back whether socket was empty post accept net: have do_accept() take a struct proto_accept_arg argument net: change proto and proto_ops accept type
2024-05-17crypto: ecc - Prevent ecc_digits_from_bytes from reading too many bytesStefan Berger1-0/+22
Prevent ecc_digits_from_bytes from reading too many bytes from the input byte array in case an insufficient number of bytes is provided to fill the output digit array of ndigits. Therefore, initialize the most significant digits with 0 to avoid trying to read too many bytes later on. Convert the function into a regular function since it is getting too big for an inline function. If too many bytes are provided on the input byte array the extra bytes are ignored since the input variable 'ndigits' limits the number of digits that will be filled. Fixes: d67c96fb97b5 ("crypto: ecdsa - Convert byte arrays with key coordinates to digits") Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-05-15Merge tag 'asymmetric-keys-next-6.10-rc1' of ↵Linus Torvalds6-189/+330
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull asymmetric keys update from Jarkko Sakkinen: "Add a self-test testing PCKS#7 signed data against ECDSA key and couple of bug fixes for missing deps" * tag 'asymmetric-keys-next-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: certs: Add ECDSA signature verification self-test certs: Move RSA self-test data to separate file KEYS: asymmetric: Add missing dependencies of FIPS_SIGNATURE_SELFTEST KEYS: asymmetric: Add missing dependency on CRYPTO_SIG
2024-05-14Merge tag 'net-next-6.10' of ↵Linus Torvalds3-2/+87
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core & protocols: - Complete rework of garbage collection of AF_UNIX sockets. AF_UNIX is prone to forming reference count cycles due to fd passing functionality. New method based on Tarjan's Strongly Connected Components algorithm should be both faster and remove a lot of workarounds we accumulated over the years. - Add TCP fraglist GRO support, allowing chaining multiple TCP packets and forwarding them together. Useful for small switches / routers which lack basic checksum offload in some scenarios (e.g. PPPoE). - Support using SMP threads for handling packet backlog i.e. packet processing from software interfaces and old drivers which don't use NAPI. This helps move the processing out of the softirq jumble. - Continue work of converting from rtnl lock to RCU protection. Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link information available via rtnetlink. - Small optimizations from Eric to UDP wake up handling, memory accounting, RPS/RFS implementation, TCP packet sizing etc. - Allow direct page recycling in the bulk API used by XDP, for +2% PPS. - Support peek with an offset on TCP sockets. - Add MPTCP APIs for querying last time packets were received/sent/acked and whether MPTCP "upgrade" succeeded on a TCP socket. - Add intra-node communication shortcut to improve SMC performance. - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver. - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver. - Add reset reasons for tracing what caused a TCP reset to be sent. - Introduce direction attribute for xfrm (IPSec) states. State can be used either for input or output packet processing. Things we sprinkled into general kernel code: - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS(). This required touch-ups and renaming of a few existing users. - Add Endian-dependent __counted_by_{le,be} annotations. - Make building selftests "quieter" by printing summaries like "CC object.o" rather than full commands with all the arguments. Netfilter: - Use GFP_KERNEL to clone elements, to deal better with OOM situations and avoid failures in the .commit step. BPF: - Add eBPF JIT for ARCv2 CPUs. - Support attaching kprobe BPF programs through kprobe_multi link in a session mode, meaning, a BPF program is attached to both function entry and return, the entry program can decide if the return program gets executed and the entry program can share u64 cookie value with return program. "Session mode" is a common use-case for tetragon and bpftrace. - Add the ability to specify and retrieve BPF cookie for raw tracepoint programs in order to ease migration from classic to raw tracepoints. - Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86, ARM64 and RISC-V JITs. This allows inlining functions which need to access per-CPU state. - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction. Support BPF arena on ARM64. - Add a new bpf_wq API for deferring events and refactor process-context bpf_timer code to keep common code where possible. - Harden the BPF verifier's and/or/xor value tracking. - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs. - Support bpf_tail_call_static() helper for BPF programs with GCC 13. - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled. Driver API: - Skip software TC processing completely if all installed rules are marked as HW-only, instead of checking the HW-only flag rule by rule. - Add support for configuring PoE (Power over Ethernet), similar to the already existing support for PoDL (Power over Data Line) config. - Initial bits of a queue control API, for now allowing a single queue to be reset without disturbing packet flow to other queues. - Common (ethtool) statistics for hardware timestamping. Tests and tooling: - Remove the need to create a config file to run the net forwarding tests so that a naive "make run_tests" can exercise them. - Define a method of writing tests which require an external endpoint to communicate with (to send/receive data towards the test machine). Add a few such tests. - Create a shared code library for writing Python tests. Expose the YAML Netlink library from tools/ to the tests for easy Netlink access. - Move netfilter tests under net/, extend them, separate performance tests from correctness tests, and iron out issues found by running them "on every commit". - Refactor BPF selftests to use common network helpers. - Further work filling in YAML definitions of Netlink messages for: nftables, team driver, bonding interfaces, vlan interfaces, VF info, TC u32 mark, TC police action. - Teach Python YAML Netlink to decode attribute policies. - Extend the definition of the "indexed array" construct in the specs to cover arrays of scalars rather than just nests. - Add hyperlinks between definitions in generated Netlink docs. Drivers: - Make sure unsupported flower control flags are rejected by drivers, and make more drivers report errors directly to the application rather than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen). - Ethernet high-speed NICs: - Broadcom (bnxt): - support multiple RSS contexts and steering traffic to them - support XDP metadata - make page pool allocations more NUMA aware - Intel (100G, ice, idpf): - extract datapath code common among Intel drivers into a library - use fewer resources in switchdev by sharing queues with the PF - add PFCP filter support - add Ethernet filter support - use a spinlock instead of HW lock in PTP clock ops - support 5 layer Tx scheduler topology - nVidia/Mellanox: - 800G link modes and 100G SerDes speeds - per-queue IRQ coalescing configuration - Marvell Octeon: - support offloading TC packet mark action - Ethernet NICs consumer, embedded and virtual: - stop lying about skb->truesize in USB Ethernet drivers, it messes up TCP memory calculations - Google cloud vNIC: - support changing ring size via ethtool - support ring reset using the queue control API - VirtIO net: - expose flow hash from RSS to XDP - per-queue statistics - add selftests - Synopsys (stmmac): - support controllers which require an RX clock signal from the MII bus to perform their hardware initialization - TI: - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices - icssg_prueth: add SW TX / RX Coalescing based on hrtimers - cpsw: minimal XDP support - Renesas (ravb): - support describing the MDIO bus - Realtek (r8169): - add support for RTL8168M - Microchip Sparx5: - matchall and flower actions mirred and redirect - Ethernet switches: - nVidia/Mellanox: - improve events processing performance - Marvell: - add support for MV88E6250 family internal PHYs - Microchip: - add DCB and DSCP mapping support for KSZ switches - vsc73xx: convert to PHYLINK - Realtek: - rtl8226b/rtl8221b: add C45 instances and SerDes switching - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup - Ethernet PHYs: - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY. - micrel: lan8814: add support for PPS out and external timestamp trigger - WiFi: - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers. Modern devices can only be configured using nl80211. - mac80211/cfg80211 - handle color change per link for WiFi 7 Multi-Link Operation - Intel (iwlwifi): - don't support puncturing in 5 GHz - support monitor mode on passive channels - BZ-W device support - P2P with HE/EHT support - re-add support for firmware API 90 - provide channel survey information for Automatic Channel Selection - MediaTek (mt76): - mt7921 LED control - mt7925 EHT radiotap support - mt7920e PCI support - Qualcomm (ath11k): - P2P support for QCA6390, WCN6855 and QCA2066 - support hibernation - ieee80211-freq-limit Device Tree property support - Qualcomm (ath12k): - refactoring in preparation of multi-link support - suspend and hibernation support - ACPI support - debugfs support, including dfs_simulate_radar support - RealTek: - rtw88: RTL8723CS SDIO device support - rtw89: RTL8922AE Wi-Fi 7 PCI device support - rtw89: complete features of new WiFi 7 chip 8922AE including BT-coexistence and Wake-on-WLAN - rtw89: use BIOS ACPI settings to set TX power and channels - rtl8xxxu: enable Management Frame Protection (MFP) support - Bluetooth: - support for Intel BlazarI and Filmore Peak2 (BE201) - support for MediaTek MT7921S SDIO - initial support for Intel PCIe BT driver - remove HCI_AMP support" * tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits) selftests: netfilter: fix packetdrill conntrack testcase net: gro: fix napi_gro_cb zeroed alignment Bluetooth: btintel_pcie: Refactor and code cleanup Bluetooth: btintel_pcie: Fix warning reported by sparse Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1 Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config Bluetooth: btintel_pcie: Fix compiler warnings Bluetooth: btintel_pcie: Add *setup* function to download firmware Bluetooth: btintel_pcie: Add support for PCIe transport Bluetooth: btintel: Export few static functions Bluetooth: HCI: Remove HCI_AMP support Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() Bluetooth: qca: Fix error code in qca_read_fw_build_info() Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning Bluetooth: btintel: Add support for Filmore Peak2 (BE201) Bluetooth: btintel: Add support for BlazarI LE Create Connection command timeout increased to 20 secs dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth Bluetooth: compute LE flow credits based on recvbuf space Bluetooth: hci_sync: Use cmd->num_cis instead of magic number ...
2024-05-14certs: Add ECDSA signature verification self-testJoachim Vandersmissen5-0/+103
Commit c27b2d2012e1 ("crypto: testmgr - allow ecdsa-nist-p256 and -p384 in FIPS mode") enabled support for ECDSA in crypto/testmgr.c. The PKCS#7 signature verification API builds upon the KCAPI primitives to perform its high-level operations. Therefore, this change in testmgr.c also allows ECDSA to be used by the PKCS#7 signature verification API (in FIPS mode). However, from a FIPS perspective, the PKCS#7 signature verification API is a distinct "service" from the KCAPI primitives. This is because the PKCS#7 API performs a "full" signature verification, which consists of both hashing the data to be verified, and the public key operation. On the other hand, the KCAPI primitive does not perform this hashing step - it accepts pre-hashed data from the caller and only performs the public key operation. For this reason, the ECDSA self-tests in crypto/testmgr.c are not sufficient to cover ECDSA signature verification offered by the PKCS#7 API. This is reflected by the self-test already present in this file for RSA PKCS#1 v1.5 signature verification. The solution is simply to add a second self-test here for ECDSA. P-256 with SHA-256 hashing was chosen as those parameters should remain FIPS-approved for the foreseeable future, while keeping the performance impact to a minimum. The ECDSA certificate and PKCS#7 signed data was generated using OpenSSL. The input data is identical to the input data for the existing RSA self-test. Signed-off-by: Joachim Vandersmissen <git@jvdsn.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-05-14certs: Move RSA self-test data to separate fileJoachim Vandersmissen5-189/+224
In preparation of adding new ECDSA self-tests, the existing data for the RSA self-tests is moved to a separate file. This file is only compiled if the new CONFIG_FIPS_SIGNATURE_SELFTEST_RSA configuration option is set, which ensures that the required dependencies (RSA, SHA-256) are present. Otherwise, the kernel would panic when trying to execute the self-test. The introduction of this new option, rather than adding the dependencies to the existing CONFIG_FIPS_SIGNATURE_SELFTEST option, allows for additional self-tests to be added for different algorithms. The kernel can then be configured to only execute the self-tests for those algorithms that are included. Signed-off-by: Joachim Vandersmissen <git@jvdsn.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-05-13net: change proto and proto_ops accept typeJens Axboe2-10/+11
Rather than pass in flags, error pointer, and whether this is a kernel invocation or not, add a struct proto_accept_arg struct as the argument. This then holds all of these arguments, and prepares accept for being able to pass back more information. No functional changes in this patch. Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-05-13Merge tag 'v6.10-p1' of ↵Linus Torvalds36-864/+425
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove crypto stats interface Algorithms: - Add faster AES-XTS on modern x86_64 CPUs - Forbid curves with order less than 224 bits in ecc (FIPS 186-5) - Add ECDSA NIST P521 Drivers: - Expose otp zone in atmel - Add dh fallback for primes > 4K in qat - Add interface for live migration in qat - Use dma for aes requests in starfive - Add full DMA support for stm32mpx in stm32 - Add Tegra Security Engine driver Others: - Introduce scope-based x509_certificate allocation" * tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits) crypto: atmel-sha204a - provide the otp content crypto: atmel-sha204a - add reading from otp zone crypto: atmel-i2c - rename read function crypto: atmel-i2c - add missing arg description crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy() crypto: sahara - use 'time_left' variable with wait_for_completion_timeout() crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout() crypto: caam - i.MX8ULP donot have CAAM page0 access crypto: caam - init-clk based on caam-page0-access crypto: starfive - Use fallback for unaligned dma access crypto: starfive - Do not free stack buffer crypto: starfive - Skip unneeded fallback allocation crypto: starfive - Skip dma setup for zeroed message crypto: hisilicon/sec2 - fix for register offset crypto: hisilicon/debugfs - mask the unnecessary info from the dump crypto: qat - specify firmware files for 402xx crypto: x86/aes-gcm - simplify GCM hash subkey derivation crypto: x86/aes-gcm - delete unused GCM assembly code crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath() hwrng: stm32 - repair clock handling ...
2024-05-13KEYS: asymmetric: Add missing dependencies of FIPS_SIGNATURE_SELFTESTEric Biggers1-0/+2
Since the signature self-test uses RSA and SHA-256, it must only be enabled when those algorithms are enabled. Otherwise it fails and panics the kernel on boot-up. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202404221528.51d75177-lkp@intel.com Fixes: 3cde3174eb91 ("certs: Add FIPS selftests") Cc: stable@vger.kernel.org Cc: Simo Sorce <simo@redhat.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-05-13KEYS: asymmetric: Add missing dependency on CRYPTO_SIGEric Biggers1-0/+1
Make ASYMMETRIC_PUBLIC_KEY_SUBTYPE select CRYPTO_SIG to avoid build errors like the following, which were possible with CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y && CONFIG_CRYPTO_SIG=n: ld: vmlinux.o: in function `public_key_verify_signature': (.text+0x306280): undefined reference to `crypto_alloc_sig' ld: (.text+0x306300): undefined reference to `crypto_sig_set_pubkey' ld: (.text+0x306324): undefined reference to `crypto_sig_verify' ld: (.text+0x30636c): undefined reference to `crypto_sig_set_privkey' Fixes: 63ba4d67594a ("KEYS: asymmetric: Use new crypto interface without scatterlists") Cc: stable@vger.kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2024-05-10crypto: api - use 'time_left' variable with ↵Wolfram Sang1-4/+4
wait_for_completion_killable_timeout() There is a confusing pattern in the kernel to use a variable named 'timeout' to store the result of wait_for_completion_killable_timeout() causing patterns like: timeout = wait_for_completion_killable_timeout(...) if (!timeout) return -ETIMEDOUT; with all kinds of permutations. Use 'time_left' as a variable to make the code self explaining. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-29Merge tag 'for-netdev' of ↵Jakub Kicinski2-0/+85
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-04-29 We've added 147 non-merge commits during the last 32 day(s) which contain a total of 158 files changed, 9400 insertions(+), 2213 deletions(-). The main changes are: 1) Add an internal-only BPF per-CPU instruction for resolving per-CPU memory addresses and implement support in x86 BPF JIT. This allows inlining per-CPU array and hashmap lookups and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko. 2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song. 3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various atomics in bpf_arena which can be JITed as a single x86 instruction, from Alexei Starovoitov. 4) Add support for passing mark with bpf_fib_lookup helper, from Anton Protopopov. 5) Add a new bpf_wq API for deferring events and refactor sleepable bpf_timer code to keep common code where possible, from Benjamin Tissoires. 6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs to check when NULL is passed for non-NULLable parameters, from Eduard Zingerman. 7) Harden the BPF verifier's and/or/xor value tracking, from Harishankar Vishwanathan. 8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel crypto subsystem, from Vadim Fedorenko. 9) Various improvements to the BPF instruction set standardization doc, from Dave Thaler. 10) Extend libbpf APIs to partially consume items from the BPF ringbuffer, from Andrea Righi. 11) Bigger batch of BPF selftests refactoring to use common network helpers and to drop duplicate code, from Geliang Tang. 12) Support bpf_tail_call_static() helper for BPF programs with GCC 13, from Jose E. Marchesi. 13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF program to have code sections where preemption is disabled, from Kumar Kartikeya Dwivedi. 14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs, from David Vernet. 15) Extend the BPF verifier to allow different input maps for a given bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu. 16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan. 17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison the stack memory, from Martin KaFai Lau. 18) Improve xsk selftest coverage with new tests on maximum and minimum hardware ring size configurations, from Tushar Vyavahare. 19) Various ReST man pages fixes as well as documentation and bash completion improvements for bpftool, from Rameez Rehman & Quentin Monnet. 20) Fix libbpf with regards to dumping subsequent char arrays, from Quentin Deslandes. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits) bpf, docs: Clarify PC use in instruction-set.rst bpf_helpers.h: Define bpf_tail_call_static when building with GCC bpf, docs: Add introduction for use in the ISA Internet Draft selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args selftests/bpf: dummy_st_ops should reject 0 for non-nullable params bpf: check bpf_dummy_struct_ops program params for test runs selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops selftests/bpf: adjust dummy_st_ops_success to detect additional error bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable selftests/bpf: Add ring_buffer__consume_n test. bpf: Add bpf_guard_preempt() convenience macro selftests: bpf: crypto: add benchmark for crypto functions selftests: bpf: crypto skcipher algo selftests bpf: crypto: add skcipher to bpf crypto bpf: make common crypto API for TC/XDP programs bpf: update the comment for BTF_FIELDS_MAX selftests/bpf: Fix wq test. selftests/bpf: Use make_sockaddr in test_sock_addr selftests/bpf: Use connect_to_addr in test_sock_addr ... ==================== Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-26crypto: ecdh - Initialize ctx->private_key in proper byte orderStefan Berger2-24/+13
The private key in ctx->private_key is currently initialized in reverse byte order in ecdh_set_secret and whenever the key is needed in proper byte order the variable priv is introduced and the bytes from ctx->private_key are copied into priv while being byte-swapped (ecc_swap_digits). To get rid of the unnecessary byte swapping initialize ctx->private_key in proper byte order and clean up all functions that were previously using priv or were called with ctx->private_key: - ecc_gen_privkey: Directly initialize the passed ctx->private_key with random bytes filling all the digits of the private key. Get rid of the priv variable. This function only has ecdh_set_secret as a caller to create NIST P192/256/384 private keys. - crypto_ecdh_shared_secret: Called only from ecdh_compute_value with ctx->private_key. Get rid of the priv variable and work with the passed private_key directly. - ecc_make_pub_key: Called only from ecdh_compute_value with ctx->private_key. Get rid of the priv variable and work with the passed private_key directly. Cc: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-26crypto: ecdh - Pass private key in proper byte order to check valid keyStefan Berger1-3/+8
ecc_is_key_valid expects a key with the most significant digit in the last entry of the digit array. Currently ecdh_set_secret passes a reversed key to ecc_is_key_valid that then passes the rather simple test checking whether the private key is in range [2, n-3]. For all current ecdh- supported curves (NIST P192/256/384) the 'n' parameter is a rather large number, therefore easily passing this test. Throughout the ecdh and ecc codebase the variable 'priv' is used for a private_key holding the bytes in proper byte order. Therefore, introduce priv in ecdh_set_secret and copy the bytes from ctx->private_key into priv in proper byte order by using ecc_swap_digits. Pass priv to ecc_is_valid_key. Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Salvatore Benedetto <salvatore.benedetto@intel.com> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-26crypto: aead,cipher - zeroize key buffer after useHailey Mothershead2-4/+2
I.G 9.7.B for FIPS 140-3 specifies that variables temporarily holding cryptographic information should be zeroized once they are no longer needed. Accomplish this by using kfree_sensitive for buffers that previously held the private key. Signed-off-by: Hailey Mothershead <hailmo@amazon.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-24bpf: crypto: add skcipher to bpf cryptoVadim Fedorenko2-0/+85
Implement skcipher crypto in BPF crypto framework. Signed-off-by: Vadim Fedorenko <vadfed@meta.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Link: https://lore.kernel.org/r/20240422225024.2847039-3-vadfed@meta.com Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
2024-04-12X.509: Introduce scope-based x509_certificate allocationLukas Wunner3-49/+28
Add a DEFINE_FREE() clause for x509_certificate structs and use it in x509_cert_parse() and x509_key_preparse(). These are the only functions where scope-based x509_certificate allocation currently makes sense. A third user will be introduced with the forthcoming SPDM library (Security Protocol and Data Model) for PCI device authentication. Unlike most other DEFINE_FREE() clauses, this one checks for IS_ERR() instead of NULL before calling x509_free_certificate() at end of scope. That's because the "constructor" of x509_certificate structs, x509_cert_parse(), returns a valid pointer or an ERR_PTR(), but never NULL. Comparing the Assembler output before/after has shown they are identical, save for the fact that gcc-12 always generates two return paths when __cleanup() is used, one for the success case and one for the error case. In x509_cert_parse(), add a hint for the compiler that kzalloc() never returns an ERR_PTR(). Otherwise the compiler adds a gratuitous IS_ERR() check on return. Introduce an assume() macro for this which can be re-used elsewhere in the kernel to provide hints for the compiler. Suggested-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com> Link: https://lore.kernel.org/all/20231003153937.000034ca@Huawei.com/ Link: https://lwn.net/Articles/934679/ Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: x509 - Add OID for NIST P521 and extend parser for itStefan Berger1-0/+3
Enable the x509 parser to accept NIST P521 certificates and add the OID for ansip521r1, which is the identifier for NIST P521. Cc: David Howells <dhowells@redhat.com> Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: asymmetric_keys - Adjust signature size calculation for NIST P521Stefan Berger1-1/+13
Adjust the calculation of the maximum signature size for support of NIST P521. While existing curves may prepend a 0 byte to their coordinates (to make the number positive), NIST P521 will not do this since only the first bit in the most significant byte is used. If the encoding of the x & y coordinates requires at least 128 bytes then an additional byte is needed for the encoding of the length. Take this into account when calculating the maximum signature size. Reviewed-by: Lukas Wunner <lukas@wunner.de> Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecdsa - Register NIST P521 and extend test suiteStefan Berger3-0/+184
Register NIST P521 as an akcipher and extend the testmgr with NIST P521-specific test vectors. Add a module alias so the module gets automatically loaded by the crypto subsystem when the curve is needed. Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecdsa - Rename keylen to bufsize where necessaryStefan Berger1-6/+6
In cases where 'keylen' was referring to the size of the buffer used by a curve's digits, it does not reflect the purpose of the variable anymore once NIST P521 is used. What it refers to then is the size of the buffer, which may be a few bytes larger than the size a coordinate of a key. Therefore, rename keylen to bufsize where appropriate. Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecdsa - Replace ndigits with nbits where precision is neededStefan Berger1-1/+1
Replace the usage of ndigits with nbits where precise space calculations are needed, such as in ecdsa_max_size where the length of a coordinate is determined. Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecc - Add NIST P521 curve parametersStefan Berger2-0/+47
Add the parameters for the NIST P521 curve and define a new curve ID for it. Make the curve available in ecc_get_curve. Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecc - Add special case for NIST P521 in ecc_point_multStefan Berger1-1/+4
In ecc_point_mult use the number of bits of the NIST P521 curve + 2. The change is required specifically for NIST P521 to pass mathematical tests on the public key. Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecc - Implement vli_mmod_fast_521 for NIST p521Stefan Berger1-0/+25
Implement vli_mmod_fast_521 following the description for how to calculate the modulus for NIST P521 in the NIST publication "Recommendations for Discrete Logarithm-Based Cryptography: Elliptic Curve Domain Parameters" section G.1.4. NIST p521 requires 9 64bit digits, so increase the ECC_MAX_DIGITS so that the vli digit array provides enough elements to fit the larger integers required by this curve. Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecc - Add nbits field to ecc_curve structureStefan Berger2-0/+9
Add the number of bits a curve has to the ecc_curve definition to be able to derive the number of bytes a curve requires for its coordinates from it. It also allows one to identify a curve by its particular size. Set the number of bits on all curve definitions. Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecdsa - Extend res.x mod n calculation for NIST P521Stefan Berger1-1/+1
res.x has been calculated by ecc_point_mult_shamir, which uses 'mod curve_prime' on res.x and therefore p > res.x with 'p' being the curve_prime. Further, it is true that for the NIST curves p > n with 'n' being the 'curve_order' and therefore the following may be true as well: p > res.x >= n. If res.x >= n then res.x mod n can be calculated by iteratively sub- tracting n from res.x until res.x < n. For NIST P192/256/384 this can be done in a single subtraction. This can also be done in a single subtraction for NIST P521. The mathematical reason why a single subtraction is sufficient is due to the values of 'p' and 'n' of the NIST curves where the following holds true: note: max(res.x) = p - 1 max(res.x) - n < n p - 1 - n < n p - 1 < 2n => holds true for the NIST curves Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecdsa - Adjust tests on length of key parametersStefan Berger1-1/+1
In preparation for support of NIST P521, adjust the basic tests on the length of the provided key parameters to only ensure that the length of the x plus y coordinates parameter array is not an odd number and that each coordinate fits into an array of 'ndigits' digits. Mathematical tests on the key's parameters are then done in ecc_is_pubkey_valid_full rejecting invalid keys. The change is necessary since NIST P521 keys do not have keys with coordinates that each require 'full' digits (= all bits in u64 used). NIST P521 only requires 2 bytes (9 bits) in the most significant digit unlike NIST P192/256/384 that each require multiple 'full' digits. Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecdsa - Convert byte arrays with key coordinates to digitsStefan Berger1-5/+9
For NIST P192/256/384 the public key's x and y parameters could be copied directly from a given array since both parameters filled 'ndigits' of digits (a 'digit' is a u64). For support of NIST P521 the key parameters need to have leading zeros prepended to the most significant digit since only 2 bytes of the most significant digit are provided. Therefore, implement ecc_digits_from_bytes to convert a byte array into an array of digits and use this function in ecdsa_set_pub_key where an input byte array needs to be converted into digits. Suggested-by: Lukas Wunner <lukas@wunner.de> Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecc - Use ECC_CURVE_NIST_P192/256/384_DIGITS where possibleStefan Berger1-6/+6
Replace hard-coded numbers with ECC_CURVE_NIST_P192/256/384_DIGITS where possible. Tested-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: algboss - remove NULL check in cryptomgr_schedule_probe()Roman Smirnov1-3/+0
The for loop will be executed at least once, so i > 0. If the loop is interrupted before i is incremented (e.g., when checking len for NULL), i will not be checked. Found by Linux Verification Center (linuxtesting.org) with Svace. Signed-off-by: Roman Smirnov <r.smirnov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-12crypto: ecc - remove checks in crypto_ecdh_shared_secret() and ↵Roman Smirnov1-2/+2
ecc_make_pub_key() With the current state of the code, ecc_get_curve() cannot return NULL in crypto_ecdh_shared_secret() and ecc_make_pub_key(). This is conditioned by the fact that they are only called from ecdh_compute_value(), which implements the kpp_alg::{generate_public_key,compute_shared_secret}() methods. Also ecdh implements the kpp_alg::init() method, which is called before the other methods and sets ecdh_ctx::curve_id to a valid value. Signed-off-by: Roman Smirnov <r.smirnov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-05crypto: jitter - Replace http with httpsThorsten Blum1-1/+1
The PDF is also available via https. Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-05crypto: jitter - Remove duplicate word in commentThorsten Blum1-1/+1
s/in// Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-05crypto: ecdh - explicitly zeroize private_keyJoachim Vandersmissen1-0/+2
private_key is overwritten with the key parameter passed in by the caller (if present), or alternatively a newly generated private key. However, it is possible that the caller provides a key (or the newly generated key) which is shorter than the previous key. In that scenario, some key material from the previous key would not be overwritten. The easiest solution is to explicitly zeroize the entire private_key array first. Note that this patch slightly changes the behavior of this function: previously, if the ecc_gen_privkey failed, the old private_key would remain. Now, the private_key is always zeroized. This behavior is consistent with the case where params.key is set and ecc_is_key_valid fails. Signed-off-by: Joachim Vandersmissen <git@jvdsn.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-05crypto: fips - Remove the now superfluous sentinel element from ctl_table arrayJoel Granados1-1/+0
This commit comes at the tail end of a greater effort to remove the empty elements at the end of the ctl_table arrays (sentinels) which will reduce the overall build time size of the kernel and run time memory bloat by ~64 bytes per sentinel (further information Link : https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/) Remove sentinel from crypto_sysctl_table Signed-off-by: Joel Granados <j.granados@samsung.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-05crypto: jitter - Use kvfree_sensitive() to fix Coccinelle warningThorsten Blum1-2/+1
Replace memzero_explicit() and kvfree() with kvfree_sensitive() to fix the following Coccinelle/coccicheck warning reported by kfree_sensitive.cocci: WARNING opportunity for kfree_sensitive/kvfree_sensitive Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02crypto: ecdsa - Fix module auto-load on add-keyStefan Berger1-0/+3
Add module alias with the algorithm cra_name similar to what we have for RSA-related and other algorithms. The kernel attempts to modprobe asymmetric algorithms using the names "crypto-$cra_name" and "crypto-$cra_name-all." However, since these aliases are currently missing, the modules are not loaded. For instance, when using the `add_key` function, the hash algorithm is typically loaded automatically, but the asymmetric algorithm is not. Steps to test: 1. Create certificate openssl req -x509 -sha256 -newkey ec \ -pkeyopt "ec_paramgen_curve:secp384r1" -keyout key.pem -days 365 \ -subj '/CN=test' -nodes -outform der -out nist-p384.der 2. Optionally, trace module requests with: trace-cmd stream -e module & 3. Trigger add_key call for the cert: # keyctl padd asymmetric "" @u < nist-p384.der 641069229 # lsmod | head -2 Module Size Used by ecdsa_generic 16384 0 Fixes: c12d448ba939 ("crypto: ecdsa - Register NIST P384 and extend test suite") Cc: stable@vger.kernel.org Signed-off-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Vitaly Chikunov <vt@altlinux.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 03:51:03 +0000