summaryrefslogtreecommitdiff
path: root/block
AgeCommit message (Collapse)AuthorFilesLines
2016-05-27Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+3
Pull block fixes from Jens Axboe: "A set of fixes that wasn't included in the first merge window pull request. This pull request contains: - A set of NVMe fixes from Keith, and one from Nic for the integrity side of it. - Fix from Ming, clearing ->mq_ops if we don't successfully setup a queue for multiqueue. - A set of stability fixes for bcache from Jiri, and also marking bcache as orphaned as it's no longer actively maintained (in mainline, at least)" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: clear q->mq_ops if init fail MAINTAINERS: mark bcache as orphan bcache: bch_gc_thread() is not freezable bcache: bch_allocator_thread() is not freezable bcache: bch_writeback_thread() is not freezable nvme/host: Add missing blk_integrity tag_size + flags assignments NVMe: Add device ID's with stripe quirk NVMe: Short-cut removal on surprise hot-unplug NVMe: Allow user initiated rescan NVMe: Reduce driver log spamming NVMe: Unbind driver on failure NVMe: Delete only created queues NVMe: Allocate queues only for online cpus
2016-05-26Merge tag 'dax-misc-for-4.7' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull misc DAX updates from Vishal Verma: "DAX error handling for 4.7 - Until now, dax has been disabled if media errors were found on any device. This enables the use of DAX in the presence of these errors by making all sector-aligned zeroing go through the driver. - The driver (already) has the ability to clear errors on writes that are sent through the block layer using 'DSMs' defined in ACPI 6.1. Other misc changes: - When mounting DAX filesystems, check to make sure the partition is page aligned. This is a requirement for DAX, and previously, we allowed such unaligned mounts to succeed, but subsequent reads/writes would fail. - Misc/cleanup fixes from Jan that remove unused code from DAX related to zeroing, writeback, and some size checks" * tag 'dax-misc-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: dax: fix a comment in dax_zero_page_range and dax_truncate_page dax: for truncate/hole-punch, do zeroing through the driver if possible dax: export a low-level __dax_zero_page_range helper dax: use sb_issue_zerout instead of calling dax_clear_sectors dax: enable dax in the presence of known media errors (badblocks) dax: fallback from pmd to pte on error block: Update blkdev_dax_capable() for consistency xfs: Add alignment check for DAX mount ext2: Add alignment check for DAX mount ext4: Add alignment check for DAX mount block: Add bdev_dax_supported() for dax mount checks block: Add vfs_msg() interface dax: Remove redundant inode size checks dax: Remove pointless writeback from dax_do_io() dax: Remove zeroing from dax_io() dax: Remove dead zeroing code from fault handlers ext2: Avoid DAX zeroing to corrupt data ext2: Fix block zeroing in ext2_get_blocks() for DAX dax: Remove complete_unwritten argument DAX: move RADIX_DAX_ definitions to dax.c
2016-05-26blk-mq: clear q->mq_ops if init failMing Lin1-1/+3
blk_mq_init_queue() calls blk_mq_init_allocated_queue(), but q->mq_ops was not cleared when blk_mq_init_allocated_queue() fails. Then blk_cleanup_queue() calls blk_mq_free_queue() which will crash because: - q->all_q_node is not added to all_q_list yet - q->tag_set is NULL - hctx was not setup yet or already freed Fixed it by clearing q->mq_ops on error path. Signed-off-by: Ming Lin <ming.l@samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-23Merge tag 'libnvdimm-for-4.7' of ↵Linus Torvalds1-32/+0
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "The bulk of this update was stabilized before the merge window and appeared in -next. The "device dax" implementation was revised this week in response to review feedback, and to address failures detected by the recently expanded ndctl unit test suite. Not included in this pull request are two dax topic branches (dax error handling, and dax radix-tree locking). These topics were deferred to get a few more days of -next integration testing, and to coordinate a branch baseline with Ted and the ext4 tree. Vishal and Ross will send the error handling and locking topics respectively in the next few days. This branch has received a positive build result from the kbuild robot across 226 configs. Summary: - Device DAX for persistent memory: Device DAX is the device-centric analogue of Filesystem DAX (CONFIG_FS_DAX). It allows memory ranges to be allocated and mapped without need of an intervening file system. Device DAX is strict, precise and predictable. Specifically this interface: a) Guarantees fault granularity with respect to a given page size (pte, pmd, or pud) set at configuration time. b) Enforces deterministic behavior by being strict about what fault scenarios are supported. Persistent memory is the first target, but the mechanism is also targeted for exclusive allocations of performance/feature differentiated memory ranges. - Support for the HPE DSM (device specific method) command formats. This enables management of these first generation devices until a unified DSM specification materializes. - Further ACPI 6.1 compliance with support for the common dimm identifier format. - Various fixes and cleanups across the subsystem" * tag 'libnvdimm-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (40 commits) libnvdimm, dax: fix deletion libnvdimm, dax: fix alignment validation libnvdimm, dax: autodetect support libnvdimm: release ida resources Revert "block: enable dax for raw block devices" /dev/dax, core: file operations and dax-mmap /dev/dax, pmem: direct access to persistent memory libnvdimm: stop requiring a driver ->remove() method libnvdimm, dax: record the specified alignment of a dax-device instance libnvdimm, dax: reserve space to store labels for device-dax libnvdimm, dax: introduce device-dax infrastructure nfit: add sysfs dimm 'family' and 'dsm_mask' attributes tools/testing/nvdimm: ND_CMD_CALL support nfit: disable vendor specific commands nfit: export subsystem ids as attributes nfit: fix format interface code byte order per ACPI6.1 nfit, libnvdimm: limited/whitelisted dimm command marshaling mechanism nfit, libnvdimm: clarify "commands" vs "_DSMs" libnvdimm: increase max envelope size for ioctl acpi/nfit: Add sysfs "id" for NVDIMM ID ...
2016-05-20Revert "block: enable dax for raw block devices"Dan Williams1-32/+0
This reverts commit 5a023cdba50c5f5f2bc351783b3131699deb3937. The functionality is superseded by the new "Device DAX" facility. Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Jan Kara <jack@suse.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-20block/partitions/ldm.c: use generic UUID libraryAndy Shevchenko1-56/+4
Instead of opencoding let's use generic UUID library functions here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: "Richard Russon (FlatCap)" <ldm@flatcap.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-05-17Merge branch 'for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (21 commits) gitignore: fix wording mfd: ab8500-debugfs: fix "between" in printk memstick: trivial fix of spelling mistake on management cpupowerutils: bench: fix "average" treewide: Fix typos in printk IB/mlx4: printk fix pinctrl: sirf/atlas7: fix printk spelling serial: mctrl_gpio: Grammar s/lines GPIOs/line GPIOs/, /sets/set/ w1: comment spelling s/minmum/minimum/ Blackfin: comment spelling s/divsor/divisor/ metag: Fix misspellings in comments. ia64: Fix misspellings in comments. hexagon: Fix misspellings in comments. tools/perf: Fix misspellings in comments. cris: Fix misspellings in comments. c6x: Fix misspellings in comments. blackfin: Fix misspelling of 'register' in comment. avr32: Fix misspelling of 'definitions' in comment. treewide: Fix typos in printk Doc: treewide : Fix typos in DocBook/filesystem.xml ...
2016-05-17Merge branch 'for-4.7/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds4-37/+20
Pull block driver updates from Jens Axboe: "On top of the core pull request, this is the drivers pull request for this merge window. This contains: - Switch drivers to the new write back cache API, and kill off the flush flags. From me. - Kill the discard support for the STEC pci-e flash driver. It's trivially broken, and apparently unmaintained, so it's safer to just remove it. From Jeff Moyer. - A set of lightnvm updates from the usual suspects (Matias/Javier, and Simon), and fixes from Arnd, Jeff Mahoney, Sagi, and Wenwei Tao. - A set of updates for NVMe: - Turn the controller state management into a proper state machine. From Christoph. - Shuffling of code in preparation for NVMe-over-fabrics, also from Christoph. - Cleanup of the command prep part from Ming Lin. - Rewrite of the discard support from Ming Lin. - Deadlock fix for namespace removal from Ming Lin. - Use the now exported blk-mq tag helper for IO termination. From Sagi. - Various little fixes from Christoph, Guilherme, Keith, Ming Lin, Wang Sheng-Hui. - Convert mtip32xx to use the now exported blk-mq tag iter function, from Keith" * 'for-4.7/drivers' of git://git.kernel.dk/linux-block: (74 commits) lightnvm: reserved space calculation incorrect lightnvm: rename nr_pages to nr_ppas on nvm_rq lightnvm: add is_cached entry to struct ppa_addr lightnvm: expose gennvm_mark_blk to targets lightnvm: remove mgt targets on mgt removal lightnvm: pass dma address to hardware rather than pointer lightnvm: do not assume sequential lun alloc. nvme/lightnvm: Log using the ctrl named device lightnvm: rename dma helper functions lightnvm: enable metadata to be sent to device lightnvm: do not free unused metadata on rrpc lightnvm: fix out of bound ppa lun id on bb tbl lightnvm: refactor set_bb_tbl for accepting ppa list lightnvm: move responsibility for bad blk mgmt to target lightnvm: make nvm_set_rqd_ppalist() aware of vblks lightnvm: remove struct factory_blks lightnvm: refactor device ops->get_bb_tbl() lightnvm: introduce nvm_for_each_lun_ppa() macro lightnvm: refactor dev->online_target to global nvm_targets lightnvm: rename nvm_targets to nvm_tgt_type ...
2016-05-17Merge branch 'for-4.7/core' of git://git.kernel.dk/linux-blockLinus Torvalds8-133/+148
Pull core block layer updates from Jens Axboe: "This is the core block IO changes for this merge window. Nothing earth shattering in here, it's mostly just fixes. In detail: - Fix for a long standing issue where wrong ordering in blk-mq caused order_to_size() to spew a warning. From Bart. - Async discard support from Christoph. Basically just splitting our sync interface into a submit + wait part. - Add a cleaner interface for flagging whether a device has a write back cache or not. We've previously overloaded blk_queue_flush() with this, but let's make it more explicit. Drivers cleaned up and updated in the drivers pull request. From me. - Fix for a double check for whether IO accounting is enabled or not. From Michael Callahan. - Fix for the async discard from Mike Snitzer, reinstating the early EOPNOTSUPP return if the device doesn't support discards. - Also from Mike, export bio_inc_remaining() so dm can drop it's private copy of it. - From Ming Lin, add support for passing in an offset for request payloads. - Tag function export from Sagi, which will be used in NVMe in the drivers pull. - Two blktrace related fixes from Shaohua. - Propagate NOMERGE flag when making a request from a bio, also from Shaohua. - An optimization to not parse cgroup paths in blk-throttle, if we don't need to. From Shaohua" * 'for-4.7/core' of git://git.kernel.dk/linux-block: blk-mq: fix undefined behaviour in order_to_size() blk-throttle: don't parse cgroup path if trace isn't enabled blktrace: add missed mask name blktrace: delete garbage for message trace block: make bio_inc_remaining() interface accessible again block: reinstate early return of -EOPNOTSUPP from blkdev_issue_discard block: Minor blk_account_io_start usage cleanup block: add __blkdev_issue_discard block: remove struct bio_batch block: copy NOMERGE flag from bio to request block: add ability to flag write back caching on a device blk-mq: Export tagset iter function block: add offset in blk_add_request_payload() writeback: Fix performance regression in wb_over_bg_thresh()
2016-05-17block: Update blkdev_dax_capable() for consistencyToshi Kani1-30/+0
blkdev_dax_capable() is similar to bdev_dax_supported(), but needs to remain as a separate interface for checking dax capability of a raw block device. Rename and relocate blkdev_dax_capable() to keep them maintained consistently, and call bdev_direct_access() for the dax capability check. There is no change in the behavior. Link: https://lkml.org/lkml/2016/5/9/950 Signed-off-by: Toshi Kani <toshi.kani@hpe.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jens Axboe <axboe@fb.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Boaz Harrosh <boaz@plexistor.com> Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
2016-05-16blk-mq: fix undefined behaviour in order_to_size()Bartlomiej Zolnierkiewicz1-1/+1
When this_order variable in blk_mq_init_rq_map() becomes zero the code incorrectly decrements the variable and passes the result to order_to_size() helper causing undefined behaviour: UBSAN: Undefined behaviour in block/blk-mq.c:1459:27 shift exponent 4294967295 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-00072-g33656a1 #22 Fix the code by checking this_order variable for not having the zero value first. Reported-by: Meelis Roos <mroos@linux.ee> Fixes: 320ae51feed5 ("blk-mq: new multi-queue block IO queueing mechanism") Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-11Merge branch 'ovl-fixes' into for-linusAl Viro8-29/+36
2016-05-10blk-throttle: don't parse cgroup path if trace isn't enabledShaohua Li1-3/+2
if trace isn't enabled, parsing cgroup path just wastes cpu Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-05block: make bio_inc_remaining() interface accessible againMike Snitzer1-11/+0
Commit 326e1dbb57 ("block: remove management of bi_remaining when restoring original bi_end_io") made bio_inc_remaining() private to bio.c because the only use-case that made sense was confined to the bio_chain() interface. Since that time DM thinp went on to use bio_chain() in its relatively complex implementation of async discard support. That implementation, even when converted over to use the new async __blkdev_issue_discard() interface, depends on deferred completion of the original discard bio -- which is most appropriately implemented using bio_inc_remaining(). DM thinp foolishly duplicated bio_inc_remaining(), local to dm-thin.c as __bio_inc_remaining(), so re-exporting bio_inc_remaining() allows us to put an end to that foolishness. All said, bio_inc_remaining() should really only be used in conjunction with bio_chain(). It isn't intended for generic bio reference counting. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-05block: reinstate early return of -EOPNOTSUPP from blkdev_issue_discardMike Snitzer1-2/+5
Commit 38f25255330 ("block: add __blkdev_issue_discard") incorrectly disallowed the early return of -EOPNOTSUPP if the device doesn't support discard (or secure discard). This early return of -EOPNOTSUPP has always been part of blkdev_issue_discard() interface so there isn't a good reason to break that behaviour -- especially when it can be easily reinstated. The nuance of allowing early return of -EOPNOTSUPP vs disallowing late return of -EOPNOTSUPP is: if the overall device never advertised support for discards and one is issued to the device it is beneficial to inform the caller that discards are not supported via -EOPNOTSUPP. But if a device advertises discard support it means that at least a subset of the device does have discard support -- but it could be that discards issued to some regions of a stacked device will not be supported. In that case the late return of -EOPNOTSUPP must be disallowed. Fixes: 38f25255330 ("block: add __blkdev_issue_discard") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-03block: Minor blk_account_io_start usage cleanupMichael Callahan1-2/+1
blk_account_io_start does not need to be wrapped with blk_do_io_stat ais it already checks for that condition. Signed-off-by: Michael Callahan <michaelcallahan@fb.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02block: add __blkdev_issue_discardChristoph Hellwig1-26/+37
This is a version of blkdev_issue_discard which doesn't wait for the I/O to complete, but instead allows the caller to submit the final bio and/or chain it to others. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagig@grimberg.me> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-05-02block: remove struct bio_batchChristoph Hellwig1-91/+27
It can be replaced with a combination of bio_chain and submit_bio_wait. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Signed-off-by: Sagi Grimberg <sagig@grimberg.me> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-18treewide: Fix typos in printkMasanari Iida1-2/+2
This patch fix spelling typos found in printk within various part of the kernel sources. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2016-04-15Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+10
Pull block fixes from Jens Axboe: "A few fixes for the current series. This contains: - Two fixes for NVMe: One fixes a reset race that can be triggered by repeated insert/removal of the module. The other fixes an issue on some platforms, where we get probe timeouts since legacy interrupts isn't working. This used not to be a problem since we had the worker thread poll for completions, but since that was killed off, it means those poor souls can't successfully probe their NVMe device. Use a proper IRQ check and probe (msi-x -> msi ->legacy), like most other drivers to work around this. Both from Keith. - A loop corruption issue with offset in iters, from Ming Lei. - A fix for not having the partition stat per cpu ref count initialized before sending out the KOBJ_ADD, which could cause user space to access the counter prior to initialization. Also from Ming Lei. - A fix for using the wrong congestion state, from Kaixu Xia" * 'for-linus' of git://git.kernel.dk/linux-block: block: loop: fix filesystem corruption in case of aio/dio NVMe: Always use MSI/MSI-x interrupts NVMe: Fix reset/remove race writeback: fix the wrong congested state variable definition block: partition: initialize percpuref before sending out KOBJ_ADD
2016-04-13block: kill off q->flush_flagsJens Axboe3-14/+18
Now that we converted everything to the newer block write cache interface, kill off the queue flush_flags and queueable flush entries. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12block: kill blk_queue_flush()Jens Axboe1-20/+0
We don't have any drivers left using it, so kill it off. Update documentation to use the newer blk_queue_write_cache(). Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12Merge branch 'for-4.7/core' into for-4.7/driversJens Axboe2-0/+65
2016-04-12block: add ability to flag write back caching on a deviceJens Axboe2-0/+65
Add an internal helper and flag for setting whether a queue has write back caching, or write through (or none). Add a sysfs file to show this as well, and make it changeable from user space. This will replace the (awkward) blk_queue_flush() interface that drivers currently use to inform the block layer of write cache state and capabilities. Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12blk-mq: Make blk_mq_all_tag_busy_iter staticSagi Grimberg1-3/+2
No caller outside the blk-mq code so we can settle with it static. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12blk-mq: Export tagset iter functionSagi Grimberg1-0/+12
Its useful to iterate on all the active tags in cases where we will need to fail all the queues IO. Signed-off-by: Sagi Grimberg <sagig@mellanox.com> [hch: carefully check for valid tagsets] Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12block: add offset in blk_add_request_payload()Ming Lin1-2/+3
We could kmalloc() the payload, so need the offset in page. Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-08fix the copy vs. map logics in blk_rq_map_user_iov()Al Viro1-39/+8
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-04mm, fs: remove remaining PAGE_CACHE_* and page_cache_{get,release} usageKirill A. Shutemov1-2/+2
Mostly direct substitution with occasional adjustment or removing outdated comments. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov8-24/+24
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-29block: partition: initialize percpuref before sending out KOBJ_ADDMing Lei1-3/+10
The initialization of partition's percpu_ref should have been done before sending out KOBJ_ADD uevent, which may cause userspace to read partition table. So the uninitialized percpu_ref may be accessed in data path. This patch fixes this issue reported by Naveen. Reported-by: Naveen Kaje <nkaje@codeaurora.org> Tested-by: Naveen Kaje <nkaje@codeaurora.org> Fixes: 6c71013ecb7e2(block: partition: convert percpu ref) Cc: <stable@vger.kernel.org> # v4.3+ Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-24Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds2-3/+6
Pull block fixes from Jens Axboe: "Final round of fixes for this merge window - some of this has come up after the initial pull request, and some of it was put in a post-merge branch before the merge window. This contains: - Fix for a bad check for an error on dma mapping in the mtip32xx driver, from Alexey Khoroshilov. - A set of fixes for lightnvm, from Javier, Matias, and Wenwei. - An NVMe completion record corruption fix from Marta, ensuring that we read things in the right order. - Two writeback fixes from Tejun, marked for stable@ as well. - A blk-mq sw queue iterator fix from Thomas, fixing an oops for sparse CPU maps. They hit this in the hot plug/unplug rework" * 'for-linus' of git://git.kernel.dk/linux-block: nvme: avoid cqe corruption when update at the same time as read writeback, cgroup: fix use of the wrong bdi_writeback which mismatches the inode writeback, cgroup: fix premature wb_put() in locked_inode_to_wb_and_lock_list() blk-mq: Use proper cpumask iterator mtip32xx: fix checks for dma mapping errors lightnvm: do not load L2P table if not supported lightnvm: do not reserve lun on l2p loading nvme: lightnvm: return ppa completion status lightnvm: add a bitmap of luns lightnvm: specify target's logical address area null_blk: add lightnvm null_blk device to the nullb_list
2016-03-20blk-mq: Use proper cpumask iteratorThomas Gleixner2-3/+6
queue_for_each_ctx() iterates over per_cpu variables under the assumption that the possible cpu mask cannot have holes. That's wrong as all cpumasks can have holes. In case there are holes the iteration ends up accessing uninitialized memory and crashing as a result. Replace the macro by a proper for_each_possible_cpu() loop and drop the unused macro blk_ctx_sum() which references queue_for_each_ctx(). Reported-by: Xiong Zhou <jencce.kernel@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-18Merge branch 'for-4.6' of ↵Linus Torvalds1-0/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata updates from Tejun Heo: - ahci grew runtime power management support so that the controller can be turned off if no devices are attached. - sata_via isn't dead yet. It got hotplug support and more refined workaround for certain WD drives. - Misc cleanups. There's a merge from for-4.5-fixes to avoid confusing conflicts in ahci PCI ID table. * 'for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: ata: ahci_xgene: dereferencing uninitialized pointer in probe AHCI: Remove obsolete Intel Lewisburg SATA RAID device IDs ata: sata_rcar: Use ARCH_RENESAS sata_via: Implement hotplug for VT6421 sata_via: Apply WD workaround only when needed on VT6421 ahci: Add runtime PM support for the host controller ahci: Add functions to manage runtime PM of AHCI ports ahci: Convert driver to use modern PM hooks ahci: Cache host controller version scsi: Drop runtime PM usage count after host is added scsi: Set request queue runtime PM status back to active on resume block: Add blk_set_runtime_active() ata: ahci_mvebu: add support for Armada 3700 variant libata: fix unbalanced spin_lock_irqsave/spin_unlock_irq() in ata_scsi_park_show() libata: support AHCI on OCTEON platform
2016-03-18Merge branch 'for-4.6/core' of git://git.kernel.dk/linux-blockLinus Torvalds5-109/+178
Pull core block updates from Jens Axboe: "Here are the core block changes for this merge window. Not a lot of exciting stuff going on in this round, most of the changes have been on the driver side of things. That pull request is coming next. This pull request contains: - A set of fixes for chained bio handling from Christoph. - A tag bounds check for blk-mq from Hannes, ensuring that we don't do something stupid if a device reports an invalid tag value. - A set of fixes/updates for the CFQ IO scheduler from Jan Kara. - A set of blk-mq fixes from Keith, adding support for dynamic hardware queues, and fixing init of max_dev_sectors for stacking devices. - A fix for the dynamic hw context from Ming. - Enabling of cgroup writeback support on a block device, from Shaohua" * 'for-4.6/core' of git://git.kernel.dk/linux-block: blk-mq: add bounds check on tag-to-rq conversion block: bio_remaining_done() isn't unlikely block: cleanup bio_endio block: factor out chained bio completion block: don't unecessarily clobber bi_error for chained bios block-dev: enable writeback cgroup support blk-mq: Fix NULL pointer updating nr_requests blk-mq: mark request queue as mq asap block: Initialize max_dev_sectors to 0 blk-mq: dynamic h/w context count cfq-iosched: Allow parent cgroup to preempt its child cfq-iosched: Allow sync noidle workloads to preempt each other cfq-iosched: Reorder checks in cfq_should_preempt() cfq-iosched: Don't group_idle if cfqq has big thinktime
2016-03-16Merge tag 'dm-4.6-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Most attention this cycle went to optimizing blk-mq request-based DM (dm-mq) that is used exclussively by DM multipath: - A stable fix for dm-mq that eliminates excessive context switching offers the biggest performance improvement (for both IOPs and throughput). - But more work is needed, during the next cycle, to reduce spinlock contention in DM multipath on large NUMA systems. - A stable fix for a NULL pointer seen when DM stats is enabled on a DM multipath device that must requeue an IO due to path failure. - A stable fix for DM snapshot to disallow the COW and origin devices from being identical. This amounts to graceful failure in the face of userspace error because these devices shouldn't ever be identical. - Stable fixes for DM cache and DM thin provisioning to address crashes seen if/when their respective metadata device experiences failures that cause the transition to 'fail_io' mode. - The DM cache 'mq' policy is now an alias for the 'smq' policy. The 'smq' policy proved to be consistently better than 'mq'. As such 'mq', with all its complex user-facing tunables, has been eliminated. - Improve DM thin provisioning to consistently return -ENOSPC once the thin-pool's data volume is out of space. - Improve DM core to properly handle error propagation if bio_integrity_clone() fails in clone_bio(). - Other small cleanups and improvements to DM core. * tag 'dm-4.6-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (41 commits) dm: fix rq_end_stats() NULL pointer in dm_requeue_original_request() dm thin: consistently return -ENOSPC if pool has run out of data space dm cache: bump the target version dm cache: make sure every metadata function checks fail_io dm: add missing newline between DM_DEBUG_BLOCK_STACK_TRACING and DM_BUFIO dm cache policy smq: clarify that mq registration failure was for 'mq' dm: return error if bio_integrity_clone() fails in clone_bio() dm thin metadata: don't issue prefetches if a transaction abort has failed dm snapshot: disallow the COW and origin devices from being identical dm cache: make the 'mq' policy an alias for 'smq' dm: drop unnecessary assignment of md->queue dm: reorder 'struct mapped_device' members to fix alignment and holes dm: remove dummy definition of 'struct dm_table' dm: add 'dm_numa_node' module parameter dm thin metadata: remove needless newline from subtree_dec() DMERR message dm mpath: cleanup reinstate_path() et al based on code review dm mpath: remove __pgpath_busy forward declaration, rename to pgpath_busy dm mpath: switch from 'unsigned' to 'bool' for flags where appropriate dm round robin: use percpu 'repeat_count' and 'current_path' dm path selector: remove 'repeat_count' return from .select_path hook ...
2016-03-15block: partition: add partition specific uevent callbacks for partition infoSan Mehat1-0/+11
This patch has been carried in the Android tree for quite some time and is one of the few patches required to get a mainline kernel up and running with an exsiting Android userspace. So I wanted to submit it for review and consideration if it should be merged. For partitions, add new uevent parameters 'PARTN' which specifies the partitions index in the table, and 'PARTNAME', which specifies PARTNAME specifices the partition name of a partition device. Android's userspace uses this for creating device node links from the partition name and number, ie: /dev/block/platform/soc/by-name/system or /dev/block/platform/soc/by-num/p1 One can see its usage here: https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#355 and https://android.googlesource.com/platform/system/core/+/master/init/devices.cpp#494 [john.stultz@linaro.org: dropped NPARTS and reworded commit message for context] Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Rom Lemarchand <romlem@google.com> Cc: Android Kernel Team <kernel-team@android.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: <harald@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-03-15blk-mq: add bounds check on tag-to-rq conversionHannes Reinecke1-1/+4
We need to check for a valid index before accessing the array element to avoid accessing invalid memory regions. Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Modified by Jens to drop the unlikely(), and make the fall through path be having a valid tag. Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-14block: bio_remaining_done() isn't unlikelyChristoph Hellwig1-1/+1
We use bio chaining during most I/Os these days due to the delayed bio splitting. Additionally XFS will start using it, and there is a pending direct I/O rewrite also making heavy use for it. Don't pretend it's always unlikely, and let the branch predictor do it's job instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-14block: cleanup bio_endioChristoph Hellwig1-18/+17
Replace the while loop that unecessarily checks for a NULL bio in the fast path with a simple goto loop. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-14block: factor out chained bio completionChristoph Hellwig1-8/+8
Factor common code between bio_chain_endio and bio_endio into a common helper. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-14block: don't unecessarily clobber bi_error for chained biosChristoph Hellwig1-2/+5
Only overwrite the parents bi_error if it was zero. That way a successful bio completion doesn't reset the error pointer. Reported-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03blk-mq: Fix NULL pointer updating nr_requestsKeith Busch1-0/+2
A h/w context's tags are freed if it was not assigned a CPU. Check if the context has tags before updating the depth. Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03block: support large requests in blk_rq_map_user_iovChristoph Hellwig1-30/+61
This patch adds support for larger requests in blk_rq_map_user_iov by allowing it to build multiple bios for a request. This functionality used to exist for the non-vectored blk_rq_map_user in the past, and this patch reuses the existing functionality for it on the unmap side, which stuck around. Thanks to the iov_iter API supporting multiple bios is fairly trivial, as we can just iterate the iov until we've consumed the whole iov_iter. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Jeff Lien <Jeff.Lien@hgst.com> Tested-by: Jeff Lien <Jeff.Lien@hgst.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-03-03block: merge: get the 1st and last bvec via helpersMing Lei1-6/+2
This patch applies the two introduced helpers to figure out the 1st and last bvec. Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-27block: disable block device DAX by defaultDan Williams1-0/+13
The recent *sync enabling discovered that we are inserting into the block_device pagecache counter to the expectations of the dirty data tracking for dax mappings. This can lead to data corruption. We want to support DAX for block devices eventually, but it requires wider changes to properly manage the pagecache. dump_stack+0x85/0xc2 dax_writeback_mapping_range+0x60/0xe0 blkdev_writepages+0x3f/0x50 do_writepages+0x21/0x30 __filemap_fdatawrite_range+0xc6/0x100 filemap_write_and_wait+0x4a/0xa0 set_blocksize+0x70/0xd0 sb_set_blocksize+0x1d/0x50 ext4_fill_super+0x75b/0x3360 mount_bdev+0x180/0x1b0 ext4_mount+0x15/0x20 mount_fs+0x38/0x170 Mark the support broken so its disabled by default, but otherwise still available for testing. Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com> Suggested-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@fb.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-02-22dm: fix excessive dm-mq context switchingMike Snitzer1-1/+1
Request-based DM's blk-mq support (dm-mq) was reported to be 50% slower than if an underlying null_blk device were used directly. One of the reasons for this drop in performance is that blk_insert_clone_request() was calling blk_mq_insert_request() with @async=true. This forced the use of kblockd_schedule_delayed_work_on() to run the blk-mq hw queues which ushered in ping-ponging between process context (fio in this case) and kblockd's kworker to submit the cloned request. The ftrace function_graph tracer showed: kworker-2013 => fio-12190 fio-12190 => kworker-2013 ... kworker-2013 => fio-12190 fio-12190 => kworker-2013 ... Fixing blk_insert_clone_request()'s blk_mq_insert_request() call to _not_ use kblockd to submit the cloned requests isn't enough to eliminate the observed context switches. In addition to this dm-mq specific blk-core fix, there are 2 DM core fixes to dm-mq that (when paired with the blk-core fix) completely eliminate the observed context switching: 1) don't blk_mq_run_hw_queues in blk-mq request completion Motivated by desire to reduce overhead of dm-mq, punting to kblockd just increases context switches. In my testing against a really fast null_blk device there was no benefit to running blk_mq_run_hw_queues() on completion (and no other blk-mq driver does this). So hopefully this change doesn't induce the need for yet another revert like commit 621739b00e16ca2d ! 2) use blk_mq_complete_request() in dm_complete_request() blk_complete_request() doesn't offer the traditional q->mq_ops vs .request_fn branching pattern that other historic block interfaces do (e.g. blk_get_request). Using blk_mq_complete_request() for blk-mq requests is important for performance. It should be noted that, like blk_complete_request(), blk_mq_complete_request() doesn't natively handle partial completions -- but the request-based DM-multipath target does provide the required partial completion support by dm.c:end_clone_bio() triggering requeueing of the request via dm-mpath.c:multipath_end_io()'s return of DM_ENDIO_REQUEUE. dm-mq fix #2 is _much_ more important than #1 for eliminating the context switches. Before: cpu : usr=15.10%, sys=59.39%, ctx=7905181, majf=0, minf=475 After: cpu : usr=20.60%, sys=79.35%, ctx=2008, majf=0, minf=472 With these changes multithreaded async read IOPs improved from ~950K to ~1350K for this dm-mq stacked on null_blk test-case. The raw read IOPs of the underlying null_blk device for the same workload is ~1950K. Fixes: 7fb4898e0 ("block: add blk-mq support to blk_insert_cloned_request()") Fixes: bfebd1cdb ("dm: add full blk-mq support to request-based DM") Cc: stable@vger.kernel.org # 4.1+ Reported-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Jens Axboe <axboe@kernel.dk>
2016-02-19block: Add blk_set_runtime_active()Mika Westerberg1-0/+24
If block device is left runtime suspended during system suspend, resume hook of the driver typically corrects runtime PM status of the device back to "active" after it is resumed. However, this is not enough as queue's runtime PM status is still "suspended". As long as it is in this state blk_pm_peek_request() returns NULL and thus prevents new requests to be processed. Add new function blk_set_runtime_active() that can be used to force the queue status back to "active" as needed. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Tejun Heo <tj@kernel.org>
2016-02-17Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds6-13/+23
Pull block fixes from Jens Axboe: "A collection of fixes from the past few weeks that should go into 4.5. This contains: - Overflow fix for sysfs discard show function from Alan. - A stacking limit init fix for max_dev_sectors, so we don't end up artificially capping some use cases. From Keith. - Have blk-mq proper end unstarted requests on a dying queue, instead of pushing that to the driver. From Keith. - NVMe: - Update to Kconfig description for NVME_SCSI, since it was vague and having it on is important for some SUSE distros. From Christoph. - Set of fixes from Keith, around surprise removal. Also kills the no-merge flag, so it supports merging. - Set of fixes for lightnvm from Matias, Javier, and Wenwei. - Fix null_blk oops when asked for lightnvm, but not available. From Matias. - Copy-to-user EINTR fix from Hannes, fixing a case where SG_IO fails if interrupted by a signal. - Two floppy fixes from Jiri, fixing signal handling and blocking open. - A use-after-free fix for O_DIRECT, from Mike Krinkin. - A block module ref count fix from Roman Pen. - An fs IO wait accounting fix for O_DSYNC from Stephane Gasparini. - Smaller reallo fix for xen-blkfront from Bob Liu. - Removal of an unused struct member in the deadline IO scheduler, from Tahsin. - Also from Tahsin, properly initialize inode struct members associated with cgroup writeback, if enabled. - From Tejun, ensure that we keep the superblock pinned during cgroup writeback" * 'for-linus' of git://git.kernel.dk/linux-block: (25 commits) blk: fix overflow in queue_discard_max_hw_show writeback: initialize inode members that track writeback history writeback: keep superblock pinned during cgroup writeback association switches bio: return EINTR if copying to user space got interrupted NVMe: Rate limit nvme IO warnings NVMe: Poll device while still active during remove NVMe: Requeue requests on suspended queues NVMe: Allow request merges NVMe: Fix io incapable return values blk-mq: End unstarted requests on dying queue block: Initialize max_dev_sectors to 0 null_blk: oops when initializing without lightnvm block: fix module reference leak on put_disk() call for cgroups throttle nvme: fix Kconfig description for BLK_DEV_NVME_SCSI kernel/fs: fix I/O wait not accounted for RW O_DSYNC floppy: refactor open() flags handling lightnvm: allow to force mm initialization lightnvm: check overflow and correct mlc pairs lightnvm: fix request intersection locking in rrpc lightnvm: warn if irqs are disabled in lock laddr ...
2016-02-17blk: fix overflow in queue_discard_max_hw_showAlan1-3/+2
We get this right for queue_discard_max_show but not max_hw_show. Follow the same pattern as queue_discard_max_show instead so that we don't truncate. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jens Axboe <axboe@fb.com>