summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2010-10-19eukrea_mbimxsd: add support for DVI displaysEric Bénard2-2/+68
Signed-off-by: Eric Bénard <eric@eukrea.com>
2010-10-19cpuimx25 & cpuimx35: fix OTG port registration in host modeEric Bénard2-20/+8
the PHY is UTMI so don't create an ULPI viewpoint. Signed-off-by: Eric Bénard <eric@eukrea.com>
2010-10-19i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472Eric Bénard1-3/+29
Without this exiting WFI can result in cache corruption. Code taken from Freescale's 2.6.27 BSP and tested on i.MX35 Signed-off-by: Eric Bénard <eric@eukrea.com>
2010-10-19mx25: fix compile error in platform-imx-dma.cEric Bénard1-0/+2
this patch fix the following errors : arch/arm/plat-mxc/devices/platform-imx-dma.c:44: error: ‘MX25_SDMA_BASE_ADDR’ undeclared here (not in a function) arch/arm/plat-mxc/devices/platform-imx-dma.c:44: error: ‘MX25_INT_SDMA’ undeclared here (not in a function) Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-10-19mx25: fix clock's calculationEric Bénard1-3/+3
* get_rate_arm : when 400MHz clock is selected (cctl & 1<<14), ARM clock is 400MHz (MPLL * 3 / 4) and not 800MHz * get_rate_per : peripherals's clock is derived from AHB and not from IPG (ref manual : figure 5-1) * can2_clk : use the correct ID * without this patch, peripherals getting their clock from PER clocks work fine because of the 2 errors which fix themselves (ARM clock x 2 and per clock actually based on IPG which is AHB/2) but flexcan can't work as it gets its clock from IPG and thus calculates its bitrate using a reference value which is twice what it really is. Signed-off-by: Eric Bénard <eric@eukrea.com>
2010-10-19ARM: imx: add lost 3rd imx-i2c device for mx35Marc Kleine-Budde1-0/+1
During the reorganisation of the imx-i2c devices (in 64de5ec168d9743903e6ec482c3e9f37af49f9c1) the 3rd imx-i2c device for the mx35 got lost. This patch adds the missing device. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-19ARM: imx: Add iram allocator functionsDinh Nguyen4-0/+119
Add IRAM(Internal RAM) allocation functions using GENERIC_ALLOCATOR. The allocation size is 4KB multiples to guarantee alignment. The idea for these functions is for i.MX platforms to use them to dynamically allocate IRAM usage. Applies on 2.6.36-rc7 Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Reviewed-by: Amit Kucheria <amit.kucheria@canonical.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11mx51: efikamx: add otg supportAmit Kucheria1-0/+30
Ethernet hangs off OTG Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11mx51: add support for genesi efikamx nettopAmit Kucheria3-0/+99
Get serial port working for now Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: iomux-mx51: Add AUD5 pinmux definitionsSascha Hauer1-0/+6
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11mx25/clocks: match esdhc-clocks to platform deviceWolfram Sang1-2/+2
So the correct clock will be taken for each of the two independent controllers. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11mxc/gpio: make _set_value work with values != 0/1Peter Korsgaard1-1/+1
Documentation/gpio.txt specifies that the value argument to gpio_set_value() should be handled as a boolean (E.G. != 0 is high), so use the same logic as in _set_direction(). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11MX35: Fix bogus L2 cache settingsJuergen Beisert1-0/+18
i.MX35 CPUs marked with "MCIMX357CJQ5C M99V CTHA0943B" are coming with bogus L2 cache settings. If these settings are kept unmodified prior enabling the L2 cache the CPU runs amok immediately when its enabled. This fix should not hurt already working CPUs, as they are using the written register value already. Its currently unknown if its possible to detect the production lot from the software to fix only affected CPUs. While at it, make sure that mxc_init_l2x0 is only executed on i.MX31/35 Signed-off-by: Juergen Beisert <jbe@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: mx3/cpuimx35: mark otg_pdata and usbh1_pdata as maybe unusedUwe Kleine-König1-2/+2
This fixes arch/arm/mach-mx3/mach-cpuimx35.c:143: warning: 'otg_pdata' defined but not used arch/arm/mach-mx3/mach-cpuimx35.c:148: warning: 'usbh1_pdata' defined but not used when USB_ULPI is not selected. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: imx: dynamically register fec devicesUwe Kleine-König32-123/+107
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: imx: fix/define clocks and create devices for imx dmaUwe Kleine-König6-4/+139
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: mx35: Add mx35_revision function to query the silicon revisionEric Bénard4-15/+43
Based on work done earlier by Sascha Hauer Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Eric Bénard <eric@eukrea.com> [ukl: actually squash the two approaches together] Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11ARM: mx3: use MX3x_ prefixed version of CHIP_REV_xSascha Hauer3-24/+10
Also, remove the deprecated symbols from arch/arm/mach-mx3/cpu.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11eukrea_mbimxsd for cpuimx25: add CAN & SDCard supportEric Bénard2-0/+8
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11i.mx25: add esdhc supportEric Bénard3-0/+31
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11eukrea_mbimxsd for cpuimx35: add CAN & SDCard supportEric Bénard2-0/+15
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11arm: pcm043: add esdhc-device to boardconfigWolfram Sang2-0/+9
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11arm: imx35: add esdhc-device to MX35-platformWolfram Sang3-3/+13
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-11arm: imx: add generic esdhc deviceWolfram Sang5-0/+57
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-04mach-cpuimx35: remove unecessary tsc2007 functions + style cleanupEric Bénard1-27/+5
- remove functions which are no more necessary for tsc2007 - indent platform_data for better readability Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx/pca100: only specify i2c device type onceUwe Kleine-König1-3/+1
The first argument to I2C_BOARD_INFO is used to assign .type, so it should not be specified a second time. For the rtc-pcf8563/pcf8563 entry gcc preferred pcf8563, so did I. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx/pcm970: make platform_data staticUwe Kleine-König1-1/+1
This fixes the following sparse warning: arch/arm/mach-imx/pcm970-baseboard.c:224:13: warning: symbol 'pcm970_baseboard_init' was not declared. Should it be static? Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: make all pin lists const and signed, move to .init where possibleUwe Kleine-König13-13/+13
Making the lists signed fixes sparse warnings like: arch/arm/mach-imx/mach-mx27_3ds.c:94:31: warning: incorrect type in argument 1 (different signedness) arch/arm/mach-imx/mach-mx27_3ds.c:94:31: expected int const *pin_list arch/arm/mach-imx/mach-mx27_3ds.c:94:31: got unsigned int static [toplevel] *<noident> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx/pcm038: make regulator platform data staticUwe Kleine-König1-1/+1
This fixes the following sparse warning: arch/arm/mach-imx/pcm970-baseboard.c:203:30: warning: symbol 'pcm970_sja1000_platform_data' was not declared. Should it be static? Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx/clock-imx27: Pass NULL as function callback, not 0Uwe Kleine-König1-21/+21
This fixes many sparse warnings like: arch/arm/mach-imx/clock-imx27.c:597:1: warning: Using plain integer as NULL pointer Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5: clock-imx51: make *ipg clocks secondary clocks of their ↵Sascha Hauer1-8/+11
corresponding peripheral clocks Currently the uarts and timer only work because they are turned on by reset default. Make them secondary clocks of their corresponding peripheral clocks to make sure they are turned on when necessary. Also, register some clocks to get rid of compiler warnings Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5: dynamically register mxc-nand deviceSascha Hauer4-2/+34
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: reorganize nand registration to use a structUwe Kleine-König12-37/+64
Addiontionally make the interrupt #defines match the base address defines MX.._NFC_BASE_ADDR. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx51: Add audmux supportSascha Hauer2-1/+8
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx51: add imx-ssi devicesSascha Hauer4-10/+35
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx51: dynamically register imx-uart devicesUwe Kleine-König10-79/+36
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5: Add Nand clock supportSascha Hauer1-0/+98
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/iomux-mx51: Fix input path of some pins in gpio modeSascha Hauer1-8/+8
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/iomux-mx51: Add aud3 primary function definesSascha Hauer1-0/+4
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/iomux-mx51: Add SPI controller padsSascha Hauer1-0/+6
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/mx51_3ds: add SPI NOR flash in the board init stageJason Wang1-0/+13
A 2M bytes SPI NOR flash(sst25vf016b) is soldered on the mx51_3ds board. So add the corresponding device for it. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/mx51_3ds: add eCSPI2 support on the imx51_3ds boardJason Wang2-0/+21
Signed-off-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/iomux-mx51: add iomux definitions for eCSPI2 on the imx51_3ds boardJason Wang1-0/+5
On the imx51_3ds board, eCSPI2 is connected to a SPI NOR flash, now add iomux definitions for those used pins. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/clock-mx51: add spi clocksJason Wang1-0/+57
Signed-off-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/clock-mx51: new macro that defines a clk with all membersUwe Kleine-König1-13/+13
Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5/clock-mx51: refactor ccgr callbacks to use common codeUwe Kleine-König1-14/+16
Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5: add spi_imx device registrationUwe Kleine-König2-0/+20
Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: use platform ids for spi_imx devicesUwe Kleine-König8-16/+18
The driver recently learned to handle platform ids. Make use of this new feature. The up side is that the driver needs less knowledge about the spi interfaces used on different SoCs. Acked-by: Jason Wang <jason77.wang@gmail.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: imx: fix name of macros to add imx-i2c devicesUwe Kleine-König10-13/+11
This is a follow up to c698715 (ARM: imx: dynamically register imx-i2c devices (imx27)) 2b92084 (ARM: imx: dynamically register imx-i2c devices (imx21)) 6348e6b (ARM: imx: dynamically register imx-i2c devices (imx1)) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-01ARM: mx5: dynamically register imx-i2c devicesUwe Kleine-König7-47/+31
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 09:59:14 +0000