summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2013-01-03ARM: nomadik: delete dangling includeLinus Walleij1-1/+0
This reference to the old include header for the FSMC NAND MTD driver was somehow left in place, get rid of it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-03Merge tag 'pinctrl-fixes' of ↵Linus Torvalds2-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "A first round of pinctrl fixes for v3.8: - i.MX5 register configuration - Swap a kfree to devm_kfree() to avoid memory corruption in the at91 driver - Add the missing device tree binding doc for the SIRF pin controller - Enable the SIRF GPIO pull up/down configuration from the device tree, it was previously retired from the hard-coded approach. - NULL check for the prcm_base in the Nomadik pin controller. - Provide the prcm_base from the device tree in the DT boot path for the Nomadik pin controller." * tag 'pinctrl-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: ARM: ux500: add pinctrl address resources pinctrl: nomadik: return if prcm_base is NULL pinctrl: sirf: enable GPIO pullup/down configuration from dts pinctrl: sirf: add missing DT-binding document pinctrl: fix comment mistake drivers/pinctrl/pinctrl-at91.c: convert kfree to devm_kfree pinctrl: imx5: fix GPIO_8 pad CAN1_RXCAN configuration
2013-01-03Merge branch 'merge' of ↵Linus Torvalds2-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here are a couple of small powerpc fixes. They aren't new bugs (and they are both CCed to stable) but I didn't see the point of sitting on the fixes any longer." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Add missing NULL terminator to avoid boot panic on PPC40x powerpc/vdso: Remove redundant locking in update_vsyscall_tz()
2013-01-03ARM: OMAP1: fix USB configuration use-after-releaseAaro Koskinen2-2/+8
All boards, except Amstrad E3, mark USB config with __initdata. As a result, when you compile USB into modules, they will try to refer already released platform data and the behaviour is undefined. For example on Nokia 770, I get the following kernel panic when modprobing ohci-hcd: [ 3.462158] Unable to handle kernel paging request at virtual address e7fddef0 [ 3.477050] pgd = c3434000 [ 3.487365] [e7fddef0] *pgd=00000000 [ 3.498535] Internal error: Oops: 80000005 [#1] ARM [ 3.510955] Modules linked in: ohci_hcd(+) [ 3.522705] CPU: 0 Not tainted (3.7.0-770_tiny+ #5) [ 3.535552] PC is at 0xe7fddef0 [ 3.546508] LR is at ohci_omap_init+0x5c/0x144 [ohci_hcd] [ 3.560272] pc : [<e7fddef0>] lr : [<bf003140>] psr: a0000013 [ 3.560272] sp : c344bdb0 ip : c344bce0 fp : c344bdcc [ 3.589782] r10: 00000001 r9 : 00000000 r8 : 00000000 [ 3.604553] r7 : 00000026 r6 : 000000de r5 : c0227300 r4 : c342d620 [ 3.621032] r3 : e7fddef0 r2 : c048b880 r1 : 00000000 r0 : 0000000a [ 3.637786] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 3.655822] Control: 0005317f Table: 13434000 DAC: 00000015 [ 3.672790] Process modprobe (pid: 425, stack limit = 0xc344a1b8) [ 3.690643] Stack: (0xc344bdb0 to 0xc344c000) [ 3.707031] bda0: bf0030e4 c342d620 00000000 c049e62c [ 3.727905] bdc0: c344be04 c344bdd0 c0150ff0 bf0030f4 bf001b88 00000000 c048a4ac c345b020 [ 3.748870] bde0: c342d620 00000000 c048a468 bf003968 00000001 bf006000 c344be34 c344be08 [ 3.769836] be00: bf001bf0 c0150e48 00000000 c344be18 c00b9bfc c048a478 c048a4ac bf0037f8 [ 3.790985] be20: c012ca04 c000e024 c344be44 c344be38 c012d968 bf001a84 c344be64 c344be48 [ 3.812164] be40: c012c8ac c012d95c 00000000 c048a478 c048a4ac bf0037f8 c344be84 c344be68 [ 3.833740] be60: c012ca74 c012c80c 20000013 00000000 c344be88 bf0037f8 c344beac c344be88 [ 3.855468] be80: c012b038 c012ca14 c38093cc c383ee10 bf0037f8 c35be5a0 c049d5e8 00000000 [ 3.877166] bea0: c344bebc c344beb0 c012c40c c012aff4 c344beec c344bec0 c012bfc0 c012c3fc [ 3.898834] bec0: bf00378c 00000000 c344beec bf0037f8 00067f39 00000000 00005c44 c000e024 [ 3.920837] bee0: c344bf14 c344bef0 c012cd54 c012befc c04ce080 00067f39 00000000 00005c44 [ 3.943023] bf00: c000e024 bf006000 c344bf24 c344bf18 c012db14 c012ccc0 c344bf3c c344bf28 [ 3.965423] bf20: bf00604c c012dad8 c344a000 bf003834 c344bf7c c344bf40 c00087ac bf006010 [ 3.987976] bf40: 0000000f bf003834 00067f39 00000000 00005c44 bf003834 00067f39 00000000 [ 4.010711] bf60: 00005c44 c000e024 c344a000 00000000 c344bfa4 c344bf80 c004c35c c0008720 [ 4.033569] bf80: c344bfac c344bf90 01422192 01427ea0 00000000 00000080 00000000 c344bfa8 [ 4.056518] bfa0: c000dec0 c004c2f0 01422192 01427ea0 01427ea0 00005c44 00067f39 00000000 [ 4.079406] bfc0: 01422192 01427ea0 00000000 00000080 b6e11008 014221aa be941fcc b6e1e008 [ 4.102569] bfe0: b6ef6300 be941758 0000e93c b6ef6310 60000010 01427ea0 00000000 00000000 [ 4.125946] Backtrace: [ 4.143463] [<bf0030e4>] (ohci_omap_init+0x0/0x144 [ohci_hcd]) from [<c0150ff0>] (usb_add_hcd+0x1b8/0x61c) [ 4.183898] r6:c049e62c r5:00000000 r4:c342d620 r3:bf0030e4 [ 4.205596] [<c0150e38>] (usb_add_hcd+0x0/0x61c) from [<bf001bf0>] (ohci_hcd_omap_drv_probe+0x17c/0x224 [ohci_hcd]) [ 4.248138] [<bf001a74>] (ohci_hcd_omap_drv_probe+0x0/0x224 [ohci_hcd]) from [<c012d968>] (platform_drv_probe+0x1c/0x20) [ 4.292144] r8:c000e024 r7:c012ca04 r6:bf0037f8 r5:c048a4ac r4:c048a478 [ 4.316192] [<c012d94c>] (platform_drv_probe+0x0/0x20) from [<c012c8ac>] (driver_probe_device+0xb0/0x208) [ 4.360168] [<c012c7fc>] (driver_probe_device+0x0/0x208) from [<c012ca74>] (__driver_attach+0x70/0x94) [ 4.405548] r6:bf0037f8 r5:c048a4ac r4:c048a478 r3:00000000 [ 4.429809] [<c012ca04>] (__driver_attach+0x0/0x94) from [<c012b038>] (bus_for_each_dev+0x54/0x90) [ 4.475708] r6:bf0037f8 r5:c344be88 r4:00000000 r3:20000013 [ 4.500366] [<c012afe4>] (bus_for_each_dev+0x0/0x90) from [<c012c40c>] (driver_attach+0x20/0x28) [ 4.528442] r7:00000000 r6:c049d5e8 r5:c35be5a0 r4:bf0037f8 [ 4.553466] [<c012c3ec>] (driver_attach+0x0/0x28) from [<c012bfc0>] (bus_add_driver+0xd4/0x228) [ 4.581878] [<c012beec>] (bus_add_driver+0x0/0x228) from [<c012cd54>] (driver_register+0xa4/0x134) [ 4.629730] r8:c000e024 r7:00005c44 r6:00000000 r5:00067f39 r4:bf0037f8 [ 4.656738] [<c012ccb0>] (driver_register+0x0/0x134) from [<c012db14>] (platform_driver_register+0x4c/0x60) [ 4.706542] [<c012dac8>] (platform_driver_register+0x0/0x60) from [<bf00604c>] (ohci_hcd_mod_init+0x4c/0x8c [ohci_hcd]) [ 4.757843] [<bf006000>] (ohci_hcd_mod_init+0x0/0x8c [ohci_hcd]) from [<c00087ac>] (do_one_initcall+0x9c/0x174) [ 4.808990] r4:bf003834 r3:c344a000 [ 4.832641] [<c0008710>] (do_one_initcall+0x0/0x174) from [<c004c35c>] (sys_init_module+0x7c/0x194) [ 4.881530] [<c004c2e0>] (sys_init_module+0x0/0x194) from [<c000dec0>] (ret_fast_syscall+0x0/0x2c) [ 4.930664] r7:00000080 r6:00000000 r5:01427ea0 r4:01422192 [ 4.956481] Code: bad PC value [ 4.978729] ---[ end trace 58280240f08342c4 ]--- [ 5.002258] Kernel panic - not syncing: Fatal exception Fix this by taking a copy of the data. Also mark Amstrad E3's data with __initdata to save some memory with multi-board kernels. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03Merge tag 'omap-fixes-a2-for-v3.8-rc' of ↵Tony Lindgren9-35/+123
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.8-rc2/fixes Some OMAP PRCM and sparse fixes against v3.8-rc1. A basic set of test logs are available here: http://www.pwsan.com/omap/testlogs/prcm_fixes_b_3.8-rc/20130102120724/ The 3730 Beagle XM here has an intermittent failure mounting SD root, but the suspicion right now is that this is due to a failing SD card, rather than any change introduced by these patches. This second version includes a few changes requested by Tony Lindgren.
2013-01-03Wire up finit_module syscallLuck, Tony3-1/+3
Linux was granted a new system call to load modules by file descriptor in commit 34e1169d996a ("module: add syscall to load module from fd"). Wire it up for ia64 (ready for the Chrome port :-) Signed-off-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-01-03microblaze: Add finit_module syscallMichal Simek2-1/+3
Add finit_module syscall to the syscall list. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-01-03microblaze: Kill __kmap_atomic()Michal Simek1-1/+1
This should be the part of this patch: "highmem: kill all __kmap_atomic()" (sha1: a24401bcf4a67c8fe17e649e74eeb09b08b79ef5) Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-01-03microblaze: Change section flags for noMMUMichal Simek1-1/+1
All files which uses user unified macros from uaccess.h (get_user/put_user/clear_user/copy_tofrom_user/ strnlen_user and strncpy_user) generate this warning messages: Assembler messages: Warning: ignoring changed section attributes for .discard Setting up discard executable section flang for __EX_TABLE_SECTION macro removed all these warnings. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-01-03microblaze: Microblaze wants sys_fork for noMMU tooMichal Simek1-2/+0
The patch "generic sys_fork / sys_vfork / sys_clone" (sha1: d2125043aebf7f53cd1c72115c17b01d0bc06ce1) introduced generic sys_fork with implementation for noMMU which returns EINVAL for noMMU. and the patch "microblaze: switch to generic fork/vfork/clone" (sha1: f3268edbe6fe0ce56e62c6d6b14640aeb04864b7) enable sys_fork only for MMU which is causing compilation failure on noMMU system. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-01-03powerpc: Add missing NULL terminator to avoid boot panic on PPC40xGabor Juhos1-1/+2
The missing NULL terminator can cause a panic on PPC405 boards during boot: Linux/PowerPC load: console=ttyS0,115200 root=/dev/mtdblock1 rootfstype=squashfs,jffs2 noinitrd init=/etc/preinit Finalizing device tree... flat tree at 0x6a5160 bootconsole [udbg0] enabled Page fault in user mode with in_atomic() = 1 mm = (null) NIP = c0275f50 MSR = fffffffe Oops: Weird page fault, sig: 11 [#1] PowerPC 40x Platform Modules linked in: NIP: c0275f50 LR: c0275f60 CTR: c0280000 REGS: c0275eb0 TRAP: 636f7265 Not tainted (3.7.1) MSR: fffffffe <VEC,VSX,EE,PR,FP,ME,SE,BE,IR,DR,PMM,RI> CR: c06a6190 XER: 00000001 TASK = c02662a8[0] 'swapper' THREAD: c0274000 GPR00: c0275ec0 c000c658 c027c4bf 00000000 c0275ee0 c000a0ec c020a1a8 c020a1f0 GPR08: c020f631 c020f404 c025f078 c025f080 c0275f10 Call Trace: ---[ end trace 31fd0ba7d8756001 ]--- Kernel panic - not syncing: Attempted to kill the idle task! The panic happens since commit 9597abe00c1bab2aedce6b49866bf6d1e81c9eed (sections: fix section conflicts in arch/powerpc), however the root cause of this is that the NULL terminator were not added in commit a4f740cf33f7f6c164bbde3c0cdbcc77b0c4997c (of/flattree: Add of_flat_dt_match() helper function). Cc: Grant Likely <grant.likely@secretlab.ca> Cc: <stable@vger.kernel.org> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-03powerpc/vdso: Remove redundant locking in update_vsyscall_tz()Shan Hai1-5/+0
The locking in update_vsyscall_tz() is not only unnecessary because the vdso code copies the data unproteced in __kernel_gettimeofday() but also introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which causes user space process to loop forever in vdso code. The following patch removes the locking from update_vsyscall_tz(). Locking is not only unnecessary because the vdso code copies the data unprotected in __kernel_gettimeofday() but also erroneous because updating the tb_update_count is not atomic and introduces a hard to reproduce race condition between update_vsyscall() and update_vsyscall_tz(), which further causes user space process to loop forever in vdso code. The below scenario describes the race condition, x==0 Boot CPU other CPU proc_P: x==0 timer interrupt update_vsyscall x==1 x++;sync settimeofday update_vsyscall_tz x==2 x++;sync x==3 sync;x++ sync;x++ proc_P: x==3 (loops until x becomes even) Because the ++ operator would be implemented as three instructions and not atomic on powerpc. A similar change was made for x86 in commit 6c260d58634 ("x86: vdso: Remove bogus locking in update_vsyscall_tz") Signed-off-by: Shan Hai <shan.hai@windriver.com> CC: <stable@vger.kernel.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-01-02Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds1-0/+4
Pull watchdog fixes from Wim Van Sebroeck: "This fixes some small errors in the new da9055 driver, eliminates a compiler warning and adds DT support for the twl4030_wdt driver (so that we can have multiple watchdogs with DT on the omap platforms)." * git://www.linux-watchdog.org/linux-watchdog: watchdog: twl4030_wdt: add DT support watchdog: omap_wdt: eliminate unused variable and a compiler warning watchdog: da9055: Don't update wdt_dev->timeout in da9055_wdt_set_timeout error path watchdog: da9055: Fix invalid free of devm_ allocated data
2013-01-02Merge tag '3.8-pci-fixes' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Some fixes for v3.8. They include a fix for the new SR-IOV sysfs management support, an expanded quirk for Ricoh SD card readers, a Stratus DMI quirk fix, and a PME polling fix." * tag '3.8-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: Reduce Ricoh 0xe822 SD card reader base clock frequency to 50MHz PCI/PM: Do not suspend port if any subordinate device needs PME polling PCI: Add PCIe Link Capability link speed and width names PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check) PCI: Remove spurious error for sriov_numvfs store and simplify flow
2013-01-03MIPS: 64-bit: Fix build if !CONFIG_MODULESJoshua Kinard1-2/+2
Fix build failure if building a monolithic kernel due to arch/mips/kernel/Kconfig selecting MODULES_USE_ELF_REL[A] without checking to see if MODULES is set or not. This leads to 'struct module' not existing, which triggers a compile failure in arch/mips/kernel/module-rela.c when the compiler attempts to dereference me->name: CC arch/mips/kernel/module-rela.o arch/mips/kernel/module-rela.c: In function ‘apply_r_mips_26_rela’: arch/mips/kernel/module-rela.c:38:74: error: dereferencing pointer to incomplete type arch/mips/kernel/module-rela.c:46:12: error: dereferencing pointer to incomplete type arch/mips/kernel/module-rela.c: In function ‘apply_relocate_add’: arch/mips/kernel/module-rela.c:133:13: error: dereferencing pointer to incomplete type make[2]: *** [arch/mips/kernel/module-rela.o] Error 1 Signed-off-by: Joshua Kinard <kumba@gentoo.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4749/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2013-01-02ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return valuesPaul Walmsley3-28/+110
On OMAP2xxx chips, the register bitfields for the PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED are different than those used on OMAP3/4. The order is reversed. So, for example, on OMAP2xxx, 0x0 indicates 'ON'; but on OMAP3/4, 0x0 indicates 'OFF'. Similarly, on OMAP2xxx, 0x3 indicates 'OFF', but on OMAP3/4, 0x3 indicates 'ON'. To fix this, we treat the OMAP3/4 values as the powerdomain API values, and create new low-level powerdomain functions for the OMAP2xxx chips which translate between the OMAP2xxx values and the OMAP3/4 values. Without this patch, the conversion of the OMAP2xxx PM code to the functional powerstate code results in a non-booting kernel. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-02ARM: OMAP3: clock data: Add missing enable/disable for EMU clockJon Hunter1-0/+2
The ETM/ETB drivers for OMAP3, enable the emu_src_ck clock in order to access the ETM/ETB hardware. The emu_src_ck should enable the EMU clock domain so that the ETM/ETB hardware is accessible. However, currently when enabling the emu_src_ck the EMU clock domain is not being enabled and so the ETM/ETB drivers are failing. Add enable/disable clock functions to enable the EMU clock domain when enabling the emu_src_ck. Signed-off-by: Jon Hunter <jon-hunter@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-02ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sourcesIvan Khoronzhuk1-1/+1
To read reset sources registers we have to use PRM_DEVICE_INST Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-02ARM: OMAP4: PRM: fix RSTTIME and RSTST offsetsNishanth Menon1-2/+2
RSTTIME is offset 0x8 and RSTST is offset 0x04 for OMAP4430 and OMAP4460. Signed-off-by: Nishanth Menon <nm@ti.com> [ivan.khoronzhuk@ti.com: ported from k3.4] Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-02ARM: OMAP4: PRM: Correct reset source mapIvan Khoronzhuk1-2/+2
In the map for reset sources register we use defines intended for using with PRM_RSTCTRL register. So fix it. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-01-02arm64: Keep the ARM64 Kconfig selects sortedCatalin Marinas1-1/+1
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-01-02arm64: Include linux/ptrace.h in asm/compat.hCatalin Marinas1-0/+1
Commit 9b064fc3f95a8e44e929fdf4d6037334ea03d15b (new helper: compat_user_stack_pointer()) introduces a call to current_pt_regs() which is defined in linux/ptrace.h, not currently included asm/compat.h. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2013-01-02watchdog: twl4030_wdt: add DT supportAaro Koskinen1-0/+4
Add DT support for twl4030_wdt. This is needed to get twl4030_wdt to probe when booting with DT. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2013-01-02ARM: 7611/1: VIC: fix bug in VIC irqdomain codeLinus Walleij1-2/+7
The VIC irqdomain code added in commit 07c9249f1fa90cc8189bed44c0bcece664596a72 "ARM: 7554/1: VIC: use irq_domain_add_simple()" Had two bugs: 1) It didn't call irq_create_mapping() once on each valid irq source in the slowpath when registering the controller. 2) It passed a -1 as IRQ offset for the DT case, whereas 0 should be passed as invalid IRQ instead. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-02ARM: 7610/1: versatile: bump IRQ numbersLinus Walleij1-3/+3
The Versatile starts to register Linux IRQ numbers from offset 0 which is illegal, since this is NO_IRQ. Bump all hard-coded IRQs by 32 to get rid of the problem. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-02ARM: 7609/1: disable errata work-arounds which access secure registersRob Herring3-2/+8
In order to support secure and non-secure platforms in multi-platform kernels, errata work-arounds that access secure only registers need to be disabled. Make all the errata options that fit in this category depend on !CONFIG_ARCH_MULTIPLATFORM. This will effectively remove the errata options as platforms are converted over to multi-platform. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-02ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlierRob Herring1-1/+2
PL310 errata work-arounds using .set_debug function are only needed on r3p0 and earlier, so check the rev and only set .set_debug on older revs. Avoiding debug register accesses fixes aborts on non-secure platforms like highbank. It is assumed that non-secure platforms needing these work-arounds have already implemented .set_debug with secure monitor calls. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-01ARM: OMAP: SRAM: resolve sparse warningsPaul Walmsley1-0/+2
Commit bb77209432873214a796a70a4539e4ebdf3feb54 ("ARM: OMAP: Move omap2+ specific parts of sram.c to mach-omap2") adds some new sparse warnings: arch/arm/plat-omap/sram.c:43:6: warning: symbol 'omap_sram_push_address' was not declared. Should it be static? arch/arm/plat-omap/sram.c:65:6: warning: symbol 'omap_sram_reset' was not declared. Should it be static? arch/arm/plat-omap/sram.c:73:13: warning: symbol 'omap_map_sram' was not declared. Should it be static? This second version fixes the warnings by including <plat/sram.h>, at Tony's request. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com>
2013-01-01ARM: OMAP AM33xx: hwmod data: resolve sparse warningsPaul Walmsley1-2/+2
Commit 70384a6af0914d5dcec034643941e29d3e3e69f7 ("ARM: OMAP3+: hwmod: Add AM33XX HWMOD data for davinci_mdio module") adds two new sparse warnings: arch/arm/mach-omap2/omap_hwmod_33xx_data.c:2518:30: warning: symbol 'am33xx_mdio_addr_space' was not declared. Should it be static? arch/arm/mach-omap2/omap_hwmod_33xx_data.c:2526:26: warning: symbol 'am33xx_cpgmac0__mdio' was not declared. Should it be static? Fix by marking the two new records as static. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Richard Cochran <richardcochran@gmail.com> Cc: David S. Miller <davem@davemloft.net> Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
2012-12-30Merge tag 'omap-late-cleanups' of ↵Linus Torvalds17-84/+100
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull late ARM cleanups for omap from Olof Johansson: "From Tony Lindgren: Here are few more patches to finish the omap changes for multiplatform conversion that are not strictly fixes, but were too complex to do with the dependencies during the merge window. Those are to move of serial-omap.h to platform_data, and the removal of remaining cpu_is_omap macro usage outside mach-omap2. Then there are several trivial fixes for typos and few minimal omap2plus_defconfig updates." * tag 'omap-late-cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arch/arm/mach-omap2/dpll3xxx.c: drop if around WARN_ON OMAP2: Fix a typo - replace regist with register. ARM/omap: use module_platform_driver macro ARM: OMAP2+: PMU: Remove unused header ARM: OMAP4: remove duplicated include from omap_hwmod_44xx_data.c ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support ARM: OMAP2+: enable devtmpfs and devtmpfs automount ARM: OMAP2+: omap_twl: Change TWL4030_MODULE_PM_RECEIVER to TWL_MODULE_PM_RECEIVER ARM: OMAP2+: Drop plat/cpu.h for omap2plus ARM: OMAP: Split fb.c to remove last remaining cpu_is_omap usage MAINTAINERS: Add an entry for omap related .dts files
2012-12-28ARM: EXYNOS: enable PINCTRL for EXYNOS5440Kukjin Kim1-0/+2
This patch removes following warning in kernel boot log, Because EXYNOS5440 can support only Pinctrl not GPIO. WARNING: at drivers/gpio/gpio-samsung.c:3102 samsung_gpiolib_init+0x68/0x8c() Unknown SoC in gpio-samsung, no GPIOs added Cc: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-28ARM: dts: use uart port1 for console on exynos4210-smdkv310Kukjin Kim1-1/+1
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-28ARM: dts: use uart port0 for console on exynos5440-ssdk5440Kukjin Kim1-1/+1
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-28ARM: SAMSUNG: fix the cpu id for EXYNOS5440Kukjin Kim1-1/+1
The value of CPU ID for EXYNOS5440 should be 0xE5440000. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-28MIPS: Wire up finit_module syscall.Ralf Baechle5-6/+13
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-28MIPS: Fix modpost error in modules attepting to use virt_addr_valid().Ralf Baechle2-1/+10
ERROR: "min_low_pfn" [drivers/block/aoe/aoe.ko] undefined! Fixed by moving the implementation of virt_addr_valid() into the kernel proper and exporting it which removes the pains of an inline or macro implementation. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-28MIPS: page.h: Remove now unnecessary #ifndef __ASSEMBLY__ wrapper.Ralf Baechle1-4/+0
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-28MIPS: Switch remaining assembler PAGE_SIZE users to <asm/asm-offsets.h>.Ralf Baechle4-8/+6
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-28MIPS: Include PAGE_S{IZE,HIFT} in <asm/offset.h>.Ralf Baechle1-0/+3
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-28MIPS: Don't include <asm/page.h> unnecessarily.Ralf Baechle5-5/+0
So far we're jumping through hoops to keep the file usable from assembler source but it's getting just too painful. Turns out that many uses of <asm/page.h> are unnecessary anyway, so just remove those. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-28ARM: OMAP: 32k counter: resolve sparse warningsPaul Walmsley1-0/+2
Commit 1fe97c8f6a1de67a5f56e029a818903d5bed8017 ("ARM: OMAP: Make OMAP clocksource source selection using kernel param") results in a new warning from sparse: arch/arm/plat-omap/counter_32k.c:86:12: warning: symbol 'omap_init_clocksource_32k' was not declared. Should it be static? This second version fixes this warning by including <plat/counter-32k.h>, at Tony's request. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Tony Lindgren <tony@atomide.com>
2012-12-27ARM: EXYNOS: Revise HDMI resource sizeSean Paul1-1/+1
Reduce the HDMI resource size from 0x100000 to 0x70000 so it doesn't overlap the Displayport resource space. HDMI: (0x14530000 - 0x145A0000) DP: (0x145B0000 - 0x145B1000) Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Prathyush K <prathyush.k@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-12-27MIPS: Fix comment.Ralf Baechle1-4/+5
The value is incorrect and were copied in Linux 2.5.4 from i386. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-27Revert "MIPS: Optimise TLB handlers for MIPS32/64 R2 cores."Ralf Baechle1-16/+0
This reverts commit ff401e52100dcdc85e572d1ad376d3307b3fe28e. This breaks on MIPS64 R2 cores such as Broadcom's.
2012-12-27MIPS: perf: Fix build failure in XLP perf support.Manuel Lauss1-38/+0
Commit 4be3d2f3966b9f010bb997dcab25e7af489a841e ("MIPS: perf: Add XLP support for hardware perf.") added UNSUPPORTED_PERF_EVENT_ID which was removed a while back. Cc: Zi Shen Lim <zlim@netlogicmicro.com> Cc: Jayachandran C <jchandra@broadcom.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: John Crispin <blogic@openwrt.org> Cc: Zi Shen Lim <zlim@netlogicmicro.com> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Acked-by: Jayachandran C <jchandra@broadcom.com> Patchwork: https://patchwork.linux-mips.org/patch/4730/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-27MIPS: Alchemy: Make 32kHz and r4k timer coexist peacefullyManuel Lauss1-20/+5
Now that the r4k timer is registered no matter what, bump the rating of the Alchemy 32kHz timer so that it gets used when it is working, and fall back on the r4k when it isn't. This fixes a timer-related hang on platform with a working 32kHz timer (the better rated c0 timer stops while executing 'wait' leading to (almost) eternal sleep) and an oops on boot on platforms without a working 32kHz timer (due to double registration of the r4k timer). Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/4728/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-12-26PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)Myron Stowe1-1/+2
Commit 284f5f9 was intended to disable the "only_one_child()" optimization on Stratus ftServer systems, but its DMI check is wrong. It looks for DMI_SYS_VENDOR that contains "ftServer", when it should look for DMI_SYS_VENDOR containing "Stratus" and DMI_PRODUCT_NAME containing "ftServer". Tested on Stratus ftServer 6400. Reported-by: Fadeeva Marina <astarta@rat.ru> Reference: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.5+
2012-12-26ARM: ux500: add pinctrl address resourcesFabio Baltieri2-2/+5
Current nmk_pinctrl driver is not PRCMU dependent anymore, so it needs its own DT address resources to work properly, as done for platform_device in: f482833 ARM: ux500: add PRCM register base for pinctrl Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-12-25ARM: dts: imx23-olinuxino: Fix IOMUX settingsFabio Estevam1-4/+4
On the imx23-olinuxino board GPIO2_1 is connected to the LED and GPIO0_17 is the USB PHY reset. So make the IOMUX assignment properly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2012-12-23sunxi: Change the machine compatible string.Maxime Ripard1-2/+2
Commit 68136b10 ("ARM: sunxi: Change device tree naming scheme for sunxi") changed the naming scheme and the compatible strings used in the device trees related to the sunXi platform, but forgot to change the compatible string in the DT machine definition. This prevents the kernel from booting on these boards. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>