summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2013-10-24s390/crashdump: remove unused variableHeiko Carstens1-1/+0
Get rid of this compile warning: arch/s390/kernel/crash_dump.c: In function 'copy_from_realmem': arch/s390/kernel/crash_dump.c:48:6: warning: unused variable 'rc' [-Wunused-variable] int rc; ^ Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/atomic: use 'unsigned int' instead of 'unsigned long' for atomic_*_mask()Chen Gang1-2/+2
The type of 'v->counter' is always 'int', and related inline assembly code also process 'int', so use 'unsigned int' instead of 'unsigned long' for the 'mask'. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/gup: handle zero nr_pages case correctlyHeiko Carstens1-1/+1
If [__]get_user_pages_fast() gets called with nr_pages == 0, the current code would walk the page tables and pin as many pages until the first invalid pte (or the kernel crashed while writing struct page pointers to the pages array). So let's handle at least the nr_pages == 0 case correctly and exit early. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/gup: reduce code duplication between [__]get_user_pages_fast functionsHeiko Carstens1-58/+23
Just call __get_user_pages_fast() from get_user_pages_fast() like powerpc. This saves a lot of duplicated code. Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/mm: do not initialize storage keysMartin Schwidefsky3-2/+11
With dirty and referenced bits implemented in software it is unnecessary to initialize the storage key for every page. With this patch not a single storage key operation is done for a system that does not use KVM. For KVM set_pte_at/pgste_set_key will do the initialization for the guest view of the storage key when the mapping for the page is established in the host. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/bpf,jit: fix prolog oddityMartin Schwidefsky1-2/+2
The prolog of functions generated by the bpf jit compiler uses an instruction sequence with an "ahi" instruction to create stack space instead of using an "aghi" instruction. Using the 32-bit "ahi" is not wrong as the stack we are operating on is an order-4 allocation which is always aligned to 16KB. But it is more consistent to use an "aghi" as the stack pointer is a 64-bit value. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390: cleanup and add sanity checks to control register macrosHeiko Carstens1-61/+51
- turn some macros into functions - merge two almost identical versions for 32/64 bit - add BUILD_BUG_ON() check to make sure the passed in array is large enough Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/pci: implement hibernation hooksSebastian Ott1-0/+41
Implement architecture-specific functionality when a PCI device is doing a hibernate transition. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/uaccess: always run the kernel in home spaceMartin Schwidefsky21-459/+51
Simplify the uaccess code by removing the user_mode=home option. The kernel will now always run in the home space mode. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/bitops: rename find_first_bit_left() to find_first_bit_inv()Heiko Carstens2-10/+39
find_first_bit_left() and friends have nothing to do with the normal LSB0 bit numbering for big endian machines used in Linux (least significant bit has bit number 0). Instead they use MSB0 bit numbering, where the most signficant bit has bit number 0. So rename find_first_bit_left() and friends to find_first_bit_inv(), to avoid any confusion. Also provide inv versions of set_bit, clear_bit and test_bit. This also removes the confusing use of e.g. set_bit() in airq.c which uses a "be_to_le" bit number conversion, which could imply that instead set_bit_le() could be used. But that is entirely wrong since the _le bitops variant uses yet another bit numbering scheme. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/bitops: use flogr instruction to implement __ffs, ffs, __fls, fls and fls64Heiko Carstens1-0/+125
Since z9 109 we have the flogr instruction which can be used to implement optimized versions of __ffs, ffs, __fls, fls and fls64. So implement and use them, instead of the generic variants. This reduces the size of the kernel image (defconfig, -march=z9-109) by 19,648 bytes. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/bitops: use generic find bit functions / reimplement _left variantHeiko Carstens6-604/+126
Just like all other architectures we should use out-of-line find bit operations, since the inline variant bloat the size of the kernel image. And also like all other architecures we should only supply optimized variants of the __ffs, ffs, etc. primitives. Therefore this patch removes the inlined s390 find bit functions and uses the generic out-of-line variants instead. The optimization of the primitives follows with the next patch. With this patch also the functions find_first_bit_left() and find_next_bit_left() have been reimplemented, since logically, they are nothing else but a find_first_bit()/find_next_bit() implementation that use an inverted __fls() instead of __ffs(). Also the restriction that these functions only work on machines which support the "flogr" instruction is gone now. This reduces the size of the kernel image (defconfig, -march=z9-109) by 144,482 bytes. Alone the size of the function build_sched_domains() gets reduced from 7 KB to 3,5 KB. We also git rid of unused functions like find_first_bit_le()... Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/s390dbf: add debug_level_enabled() functionHendrik Brueckner1-0/+5
Add the debug_level_enabled() function to check if debug events for a particular level would be logged. This might help to save cycles for debug events that require additional information collection. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/bitops: optimize set_bit() for constant valuesHeiko Carstens2-1/+37
Since zEC12 we have the interlocked-access facility 2 which allows to use the instructions ni/oi/xi to update a single byte in storage with compare-and-swap semantics. So change set_bit(), clear_bit() and change_bit() to generate such code instead of a compare-and-swap loop (or using the load-and-* instruction family), if possible. This reduces the text segment by yet another 8KB (defconfig). Alternatively the long displacement variants niy/oiy/xiy could have been used, but the extended displacement field is usually not needed and therefore would only increase the size of the text segment again. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/bitops: remove CONFIG_SMP / simplify non-atomic bitopsHeiko Carstens2-217/+65
Remove CONFIG_SMP from bitops code. This reduces the C code significantly but also generates better code for the SMP case. This means that for !CONFIG_SMP set_bit() and friends now also have compare and swap semantics (read: more code). However nobody really cares for !CONFIG_SMP and this is the trade-off to simplify the SMP code which we do care about. The non-atomic bitops like __set_bit() now generate also better code because the old code did not have a __builtin_contant_p() check for the CONFIG_SMP case and therefore always generated the inline assembly variant. However the inline assemblies for the non-atomic case now got completely removed since gcc can produce better code, which accesses less memory operands. test_bit() got also a bit simplified since it did have a __builtin_constant_p() check, however two identical code pathes for each case (written differently). In result this mainly reduces the to be maintained code but is not very relevant for code generation, since there are not many non-atomic bitops usages that we care about. (code reduction defconfig kernel image before/after: 560 bytes). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/atomic: various small cleanupsHeiko Carstens1-18/+24
- add a typecheck to the defines to make sure they operate on an atomic_t - simplify inline assembly constraints - keep variable names common between functions Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/atomic: optimize atomic_add() for constant valuesHeiko Carstens1-8/+40
If the interlocked-access facility 1 is available we can use the asi and agsi instructions for interlocked updates if the to be added value is a contanst and small (in the range of -128..127). asi and agsi do not not return the old or new value, therefore these instructions can only be used for atomic_(add|sub|inc|dec)[64]. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/kprobes: allow kprobes only on known instructionsHeiko Carstens3-1/+9
Since we have an in-kernel disassembler we can make sure that there won't be any kprobes set on random data. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/kprobes: use insn_length helper functionHeiko Carstens1-4/+5
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/dis: move disassembler function prototypes to proper header fileHeiko Carstens5-6/+7
Now that the in-kernel disassembler has an own header file move the disassembler related function prototypes to that header file. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/dis: move common definitions to a header fileSuzuki K. Poulose2-28/+43
The patch moves some of the definitions to a header file. No functional changes involved. I have retained the Copyright Statement from the original file. Signed-off-by: Suzuki K Poulose <suzuki@in.ibm.com> [Heiko Carstens: rename s390-dis.h to dis.h] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/dis: rename structures for unique typesSuzuki K. Poulose1-28/+28
Rename 'insn' and 'operand' structures to more canonical names to avoid conflicts. struct insn represents information about an instruction, including the mnemonics, format and opcode. struct operand represents the 'properties' and information on howto interpret the operand value and doesn't contain the value. We rename these structures for avoiding a global conflict. i.e, 1,$s/struct insn/struct s390_insn/g 1,$s/struct operand/struct s390_operand/g Signed-off-by: Suzuki K Poulose <suzuki@in.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/atomic: make use of interlocked-access facility 1 instructionsHeiko Carstens1-12/+65
Same as for bitops: make use of the interlocked-access facility 1 instructions which allow to atomically update storage locations without a compare-and-swap loop. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/atomic: implement atomic_sub_return() with atomic_add_return()Heiko Carstens1-21/+2
Get rid of the own atomic_sub_return() implementation. Otherwise we can't make use of the interlocked-access facility 1 instructions for atomic_sub_return(), since there is no "load and subtract" instruction available. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/kprobes: have more correct if statement in s390_get_insn_slot()Heiko Carstens1-1/+1
When checking the insn address wether it is a kernel image or module address it should be an if-else-if statement not two independent if statements. This doesn't really fix a bug, but matches s390_free_insn_slot(). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390: always set -march compiler optionHeiko Carstens1-7/+7
Currently we only set the -march compiler option if the kbuild system figured out that the compiler actually supports the selected architecture (cc-option test). In result this means that no -march compiler option is set when an unsupported cpu architecture of the current compiler is selected. The kernel compile will afterwards succeed but with the default architecture instead of the (unsupported) selected one. Change this behaviour, so compiles will fail if the compiler does not support the selected cpu architecture. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-24s390/bitops: make use of interlocked-access facility 1 instructionsHeiko Carstens1-17/+49
Make use of the interlocked-access facility 1 that got added with the z196 architecure. This facilility added new instructions which can atomically update a storage location without a compare-and-swap loop. E.g. setting a bit within a "long" can be done with a single instruction. The size of the kernel image gets ~30kb smaller. Considering that there are appr. 1900 bitops call sites this means that each one saves about 15-16 bytes per call site which is expected. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-23Merge branch 'for-linus' of ↵Linus Torvalds6-28/+30
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Several last minute bug fixes. Two of them are on the larger side for rc7, the dasd format patch for older storage devices and the store-clock-fast patch where we have been to optimistic with an optimization" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/time: correct use of store clock fast s390/vmlogrdr: fix array access in vmlogrdr_open() s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32() s390/dasd: check for availability of prefix command during format s390/mm,kvm: fix software dirty bits vs. kvm for old machines
2013-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds5-6/+19
Pull networking fixes from David Miller: "Sorry I let so much accumulate, I was in Buffalo and wanted a few things to cook in my tree for a while before sending to you. Anyways, it's a lot of little things as usual at this stage in the game" 1) Make bonding MAINTAINERS entry reflect reality, from Andy Gospodarek. 2) Fix accidental sock_put() on timewait mini sockets, from Eric Dumazet. 3) Fix crashes in l2tp due to mis-handling of ipv4 mapped ipv6 addresses, from François CACHEREUL. 4) Fix heap overflow in __audit_sockaddr(), from the eagle eyed Dan Carpenter. 5) tcp_shifted_skb() doesn't take handle FINs properly, from Eric Dumazet. 6) SFC driver bug fixes from Ben Hutchings. 7) Fix TX packet scheduling wedge after channel change in ath9k driver, from Felix Fietkau. 8) Fix user after free in BPF JIT code, from Alexei Starovoitov. 9) Source address selection test is reversed in __ip_route_output_key(), fix from Jiri Benc. 10) VLAN and CAN layer mis-size netlink attributes, from Marc Kleine-Budde. 11) Fix permission checks in sysctls to use current_euid() instead of current_uid(). From Eric W Biederman. 12) IPSEC policies can go away while a timer is still pending for them, add appropriate ref-counting to fix, from Steffen Klassert. 13) Fix mis-programming of FDR and RMCR registers on R8A7740 sh_eth chips, from Nguyen Hong Ky and Simon Horman. 14) MLX4 forgets to DMA unmap pages on RX, fix from Amir Vadai. 15) IPV6 GRE tunnel MTU upper limit is miscalculated, from Oussama Ghorbel. 16) Fix typo in fq_change(), we were assigning "initial quantum" to "quantum". From Eric Dumazet. 17) Set a more appropriate sk_pacing_rate for non-TCP sockets, otherwise FQ packet scheduler does not pace those flows properly. Also from Eric Dumazet. 18) rtlwifi miscalculates packet pointers, from Mark Cave-Ayland. 19) l2tp_xmit_skb() can be called from process context, not just softirq context, so we must always make sure to BH disable around it. From Eric Dumazet. 20) On qdisc reset, we forget to purge the RB tree of SKBs in netem packet scheduler. From Stephen Hemminger. 21) Fix info leak in farsync WAN driver ioctl() handler, from Dan Carpenter and Salva Peiró. 22) Fix PHY reset and other issues in dm9000 driver, from Nikita Kiryanov and Michael Abbott. 23) When hardware can do SCTP crc32 checksums, we accidently don't disable the csum offload when IPSEC transformations have been applied. From Fan Du and Vlad Yasevich. 24) Tail loss probing in TCP leaves the socket in the wrong congestion avoidance state. From Yuchung Cheng. 25) In CPSW driver, enable NAPI before interrupts are turned on, from Markus Pargmann. 26) Integer underflow and dual-assignment in YAM hamradio driver, from Dan Carpenter. 27) If we are going to mangle a packet in tcp_set_skb_tso_segs() we must unclone it. This fixes various hard to track down crashes in drivers where the SKBs ->gso_segs was changing right from underneath the driver during TX queueing. From Eric Dumazet. 28) Fix the handling of VLAN IDs, and in particular the special IDs 0 and 4095, in the bridging layer. From Toshiaki Makita. 29) Another info leak, this time in wanxl WAN driver, from Salva Peiró. 30) Fix race in socket credential passing, from Daniel Borkmann. 31) WHen NETLABEL is disabled, we don't validate CIPSO packets properly, from Seif Mazareeb. 32) Fix identification of fragmented frames in ipv4/ipv6 UDP Fragmentation Offload output paths, from Jiri Pirko. 33) Virtual Function fixes in bnx2x driver from Yuval Mintz and Ariel Elior. 34) When we removed the explicit neighbour pointer from ipv6 routes a slight regression was introduced for users such as IPVS, xt_TEE, and raw sockets. We mix up the users requested destination address with the routes assigned nexthop/gateway. From Julian Anastasov and Simon Horman. 35) Fix stack overruns in rt6_probe(), the issue is that can end up doing two full packet xmit paths at the same time when emitting neighbour discovery messages. From Hannes Frederic Sowa. 36) davinci_emac driver doesn't handle IFF_ALLMULTI correctly, from Mariusz Ceier. 37) Make sure to set TCP sk_pacing_rate after the first legitimate RTT sample, from Neal Cardwell. 38) Wrong netlink attribute passed to xfrm_replay_verify_len(), from Steffen Klassert. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (152 commits) ax88179_178a: Add VID:DID for Samsung USB Ethernet Adapter ax88179_178a: Correct the RX error definition in RX header Revert "bridge: only expire the mdb entry when query is received" tcp: initialize passive-side sk_pacing_rate after 3WHS davinci_emac.c: Fix IFF_ALLMULTI setup mac802154: correct a typo in ieee802154_alloc_device() prototype ipv6: probe routes asynchronous in rt6_probe netfilter: nf_conntrack: fix rt6i_gateway checks for H.323 helper ipv6: fill rt6i_gateway with nexthop address ipv6: always prefer rt6i_gateway if present bnx2x: Set NETIF_F_HIGHDMA unconditionally bnx2x: Don't pretend during register dump bnx2x: Lock DMAE when used by statistic flow bnx2x: Prevent null pointer dereference on error flow bnx2x: Fix config when SR-IOV and iSCSI are enabled bnx2x: Fix Coalescing configuration bnx2x: Unlock VF-PF channel on MAC/VLAN config error bnx2x: Prevent an illegal pointer dereference during panic bnx2x: Fix Maximum CoS estimation for VFs drivers: net: cpsw: fix kernel warn during iperf test with interrupt pacing ...
2013-10-22s390/time: correct use of store clock fastMartin Schwidefsky4-25/+25
The result of the store-clock-fast (STCKF) instruction is a bit fuzzy. It can happen that the value stored on one CPU is smaller than the value stored on another CPU, although the order of the stores is the other way around. This can cause deltas of get_tod_clock() values to become negative when they should not be. We need to be more careful with store-clock-fast, this patch partially reverts git commit e4b7b4238e666682555461fa52eecd74652f36bb "time: always use stckf instead of stck if available". The get_tod_clock() function now uses the store-clock-extended (STCKE) instruction. get_tod_clock_fast() can be used if the fuzziness of store-clock-fast is acceptable e.g. for wait loops local to a CPU. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-19parisc: enable DEVTMPFS, DEVTMPFS_MOUNT and BLK_DEV_INITRD in defconfigsHelge Deller6-0/+14
Latest udev requires that DEVTMPFS and DEVTMPFS_MOUNT are enabled, else initrd will fail to find root filesystem. Enable missing BLK_DEV_INITRD for B180 and C3000 machines. Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-19Revert "parisc: Export flush_cache_page() (needed by lustre)"Helge Deller1-1/+0
This reverts commit 320c90be7ba1c371e882edff57272a89b213d136. Christoph Hellwig <hch@infradead.org> commented: This one shouldn't go in - Geert sent it a bit prematurely, as Lustre shouldn't use it just to reimplement core VM functionality (which it shouldn't use either, but that's a separate story). Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-18Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Two fixlets: - fix a (rare-config) build bug - fix a next-gen SGI/UV hw/firmware enumeration bug" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Update UV3 hub revision ID x86/microcode: Correct Kconfig dependencies
2013-10-15Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-3/+0
Pull device tree fixes and reverts from Grant Likely: "One bug fix and three reverts. The reverts back out the slightly controversial feeding the entire device tree into the random pool and the reserved-memory binding which isn't fully baked yet. Expect the reserved-memory patches at least to resurface for v3.13. The bug fixes removes a scary but harmless warning on SPARC that was introduced in the v3.12 merge window. v3.13 will contain a proper fix that makes the new code work on SPARC. On the plus side, the diffstat looks *awesome*. I love removing lines of code" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: Revert "drivers: of: add initialization code for dma reserved memory" Revert "ARM: init: add support for reserved memory defined by device tree" Revert "of: Feed entire flattened device tree into the random pool" of: fix unnecessary warning on missing /cpus node
2013-10-15Merge branch 'fixes-for-v3.12' of ↵Linus Torvalds1-15/+28
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping fix from Marek Szyprowski: "A bugfix for the IOMMU-based implementation of dma-mapping subsystem for ARM architecture" * 'fixes-for-v3.12' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: Always pass proper prot flags to iommu_map()
2013-10-15Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-3/+14
Pull kvm fix from Gleb Natapov. * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Enable pvspinlock after jump_label_init() to avoid VM hang
2013-10-15Merge tag 'stable/for-linus-3.12-rc4-tag' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from Stefano Stabellini: "A small fix for Xen on x86_32 and a build fix for xen-tpmfront on arm64" * tag 'stable/for-linus-3.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Fix possible user space selector corruption tpm: xen-tpmfront: fix missing declaration of xen_domain
2013-10-15s390/compat,signal: fix return value of copy_siginfo_(to|from)_user32()Heiko Carstens1-2/+2
The return value of copy_siginfo_(to|from)_user32() gets passed to user space, however we do not convert a positive return value from copy_(to|from)_user to -EFAULT. Therefore these functions (and the calling system calls) my incorrectly return a positive number (bytes not copied) instead of -EFAULT. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15s390/mm,kvm: fix software dirty bits vs. kvm for old machinesMartin Schwidefsky1-1/+3
For machines without enhanced supression on protection the software dirty bit code forces the pte dirty bit and clears the page protection bit in pgste_set_pte. This is done for all pte types, the check for present ptes is missing. As a result swap ptes and other not-present ptes can get corrupted. Add a check for the _PAGE_PRESENT bit to pgste_set_pte before modifying the pte value. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-10-15KVM: Enable pvspinlock after jump_label_init() to avoid VM hangRaghavendra K T1-3/+14
We use jump label to enable pv-spinlock. With the changes in (442e0973e927 Merge branch 'x86/jumplabel'), the jump label behaviour has changed that would result in eventual hang of the VM since we would end up in a situation where slow path locks would halt the vcpus but we will not be able to wakeup the vcpu by lock releaser using unlock kick. Similar problem in Xen and more detailed description is available in a945928ea270 (xen: Do not enable spinlocks before jump_label_init() has executed) This patch splits kvm_spinlock_init to separate jump label changes with pvops patching and also make jump label enabling after jump_label_init(). Signed-off-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-10-15Revert "ARM: init: add support for reserved memory defined by device tree"Marek Szyprowski1-3/+0
This reverts commit 10bcdfb8ba24760f715f0a700c3812747eddddf5. There is no consensus on the bindings for the reserved memory, so the code for handing it will be reverted. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Grant Likely <grant.likely@linaro.org>
2013-10-15x86: Update UV3 hub revision IDRuss Anderson1-1/+1
The UV3 hub revision ID is different than expected. The first revision was supposed to start at 1 but instead will start at 0. Signed-off-by: Russ Anderson <rja@sgi.com> Cc: <stable@kernel.org> # v3.9, v3.10, v3.11 Link: http://lkml.kernel.org/r/20131014161733.GA6274@sgi.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-14Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds6-9/+44
Pull ARM fixes from Russell King: "Some more ARM fixes, nothing particularly major here. The biggest change is to fix the SMP_ON_UP code so that it works with TI's Aegis cores" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7851/1: check for number of arguments in syscall_get/set_arguments() ARM: 7846/1: Update SMP_ON_UP code to detect A9MPCore with 1 CPU devices ARM: 7845/1: sharpsl_param.c: fix invalid memory access for pxa devices ARM: 7843/1: drop asm/types.h from generic-y ARM: 7842/1: MCPM: don't explode if invoked without being initialized first
2013-10-14x86/microcode: Correct Kconfig dependenciesBorislav Petkov1-0/+1
I have a randconfig here which has enabled only CONFIG_MICROCODE=y CONFIG_MICROCODE_OLD_INTERFACE=y with both # CONFIG_MICROCODE_INTEL is not set # CONFIG_MICROCODE_AMD is not set off. Which makes building the microcode functionality a little pointless. Don't do that in such cases then. Signed-off-by: Borislav Petkov <bp@suse.de> Link: http://lkml.kernel.org/r/1381682189-14470-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-13ARM: 7851/1: check for number of arguments in syscall_get/set_arguments()AKASHI Takahiro1-0/+6
In ftrace_syscall_enter(), syscall_get_arguments(..., 0, n, ...) if (i == 0) { <handle ORIG_r0> ...; n--;} memcpy(..., n * sizeof(args[0])); If 'number of arguments(n)' is zero and 'argument index(i)' is also zero in syscall_get_arguments(), none of arguments should be copied by memcpy(). Otherwise 'n--' can be a big positive number and unexpected amount of data will be copied. Tracing system calls which take no argument, say sync(void), may hit this case and eventually make the system corrupted. This patch fixes the issue both in syscall_get_arguments() and syscall_set_arguments(). Cc: <stable@vger.kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-10-13Merge tag 'fixes-for-linus' of ↵Linus Torvalds8-9/+49
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A small batch of fixes this week, mostly OMAP related. Nothing stands out as particularly controversial. Also a fix for a 3.12-rc1 timer regression for Exynos platforms, including the Chromebooks" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: exynos: dts: Update 5250 arch timer node with clock frequency ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT
2013-10-13ARM: exynos: dts: Update 5250 arch timer node with clock frequencyYuvaraj Kumar C D1-0/+5
Without the "clock-frequency" property in arch timer node, could able to see the below crash dump. [<c0014e28>] (unwind_backtrace+0x0/0xf4) from [<c0011808>] (show_stack+0x10/0x14) [<c0011808>] (show_stack+0x10/0x14) from [<c036ac1c>] (dump_stack+0x7c/0xb0) [<c036ac1c>] (dump_stack+0x7c/0xb0) from [<c01ab760>] (Ldiv0_64+0x8/0x18) [<c01ab760>] (Ldiv0_64+0x8/0x18) from [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) [<c0062f60>] (clockevents_config.part.2+0x1c/0x74) from [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) [<c0062fd8>] (clockevents_config_and_register+0x20/0x2c) from [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) [<c02b8e8c>] (arch_timer_setup+0xa8/0x134) from [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) [<c04b47b4>] (arch_timer_init+0x1f4/0x24c) from [<c04b40d8>] (clocksource_of_init+0x34/0x58) [<c04b40d8>] (clocksource_of_init+0x34/0x58) from [<c049ed8c>] (time_init+0x20/0x2c) [<c049ed8c>] (time_init+0x20/0x2c) from [<c049b95c>] (start_kernel+0x1e0/0x39c) THis is because the Exynos u-boot, for example on the Chromebooks, doesn't set up the CNTFRQ register as expected by arch_timer. Instead, we have to specify the frequency in the device tree like this. Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> [olof: Changed subject, added comment, elaborated on commit message] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-13Merge tag 'fixes-against-v3.12-rc3-take2' of ↵Olof Johansson7-9/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few fixes for omap3 related hangs and errors that people have noticed now that people are actually using the device tree based booting for omap3. Also one regression fix for timer compile for dra7xx when omap5 is not selected, and a LED regression fix for n900. * tag 'fixes-against-v3.12-rc3-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2: RX-51: Add missing max_current to rx51_lp5523_led_config ARM: mach-omap2: board-generic: fix undefined symbol ARM: dts: Fix pinctrl mask for omap3 ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree ARM: OMAP2: gpmc-onenand: fix sync mode setup with DT Signed-off-by: Olof Johansson <olof@lixom.net>
2013-10-13parisc: let probe_kernel_read() capture access to page zeroHelge Deller1-1/+14
Signed-off-by: Helge Deller <deller@gmx.de>
2013-10-13parisc: optimize variable initialization in do_page_faultJohn David Anglin1-5/+10
The attached change defers the initialization of the variables tsk, mm and flags until they are needed. As a result, the code won't crash if a kernel probe is done with a corrupt context and the code will be better optimized. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 11:15:15 +0000