summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2018-12-20Merge tag 'm68k-for-v4.20-tag2' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fix from Geert Uytterhoeven: "Fix memblock-related crashes" * tag 'm68k-for-v4.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Fix memblock-related crashes
2018-12-19m68k: Fix memblock-related crashesGeert Uytterhoeven2-2/+2
When running the kernel in Fast RAM on Atari: Ignoring memory chunk at 0x0:0xe00000 before the first chunk ... Unable to handle kernel NULL pointer dereference at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<0069dbac>] free_all_bootmem+0x12c/0x186 SR: 2714 SP: (ptrval) a2: 005e3314 d0: 00000000 d1: 0000000a d2: 00000e00 d3: 00000000 d4: 005e1fc0 d5: 0000001a a0: 01000000 a1: 00000000 Process swapper (pid: 0, task=(ptrval)) Frame format=7 eff addr=00000736 ssw=0505 faddr=00000736 wb 1 stat/addr/data: 0000 00000000 00000000 wb 2 stat/addr/data: 0000 00000000 00000000 wb 3 stat/addr/data: 0000 00000736 00000000 push data: 00000000 00000000 00000000 00000000 Stack from 005e1f84: 00000000 0000000a 027d3260 006b5006 00000000 00000000 00000000 00000000 0004f062 0003a220 0069e272 005e1ff8 0000054c 00000000 00e00000 00000000 00000001 00693cd8 027d3260 0004f062 0003a220 00691be6 00000000 00000000 00000000 00000000 00000000 00000000 006b5006 00000000 00690872 Call Trace: [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<0069e272>] memblock_virt_alloc_try_nid+0x0/0xa4 [<00693cd8>] mem_init+0xa/0x5c [<0004f062>] printk+0x0/0x18 [<0003a220>] parse_args+0x0/0x2d4 [<00691be6>] start_kernel+0x1ca/0x462 [<00690872>] _sinittext+0x872/0x11f8 Code: 7a1a eaae 2270 6db0 0061 ef14 2f01 2f03 <96a9> 0736 2203 e589 d681 e78b d6a9 0732 2f03 2f40 0034 4eb9 0069 b8d0 260e 4fef Disabling lock debugging due to kernel taint Kernel panic - not syncing: Attempted to kill the idle task! As the kernel must run in the memory chunk with the lowest address, ST-RAM is ignored, and removed from the m68k_memory[] array. However, it is not removed from memblock, causing a crash later. More investigation shows that there are 3 places where memory chunks are ignored, all after the calls to memblock_add() in m68k_parse_bootinfo(), and thus causing crashes: 1. On classic m68k CPUs with a MMU, paging_init() ignores all memory chunks below the first chunk, cfr. above, 2. On Amigas equipped with a Zorro III bus, config_amiga() ignores all Zorro II memory, 3. If CONFIG_SINGLE_MEMORY_CHUNK=y, m68k_parse_bootinfo() ignores all but the first memory chunk. Fix this by moving the calls to memblock_add() from m68k_parse_bootinfo() to paging_init(), after all ignored memory chunks have been removed from m68k_memory[]. Reported-by: Andreas Schwab <schwab@linux-m68k.org> Fixes: 1008a11590b966b4 ("m68k: switch to MEMBLOCK + NO_BOOTMEM") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2018-12-18kvm: x86: Add AMD's EX_CFG to the list of ignored MSRsEduardo Habkost2-0/+3
Some guests OSes (including Windows 10) write to MSR 0xc001102c on some cases (possibly while trying to apply a CPU errata). Make KVM ignore reads and writes to that MSR, so the guest won't crash. The MSR is documented as "Execution Unit Configuration (EX_CFG)", at AMD's "BIOS and Kernel Developer's Guide (BKDG) for AMD Family 15h Models 00h-0Fh Processors". Cc: stable@vger.kernel.org Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-18KVM: X86: Fix NULL deref in vcpu_scan_ioapicWanpeng Li1-1/+1
Reported by syzkaller: CPU: 1 PID: 5962 Comm: syz-executor118 Not tainted 4.20.0-rc6+ #374 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:kvm_apic_hw_enabled arch/x86/kvm/lapic.h:169 [inline] RIP: 0010:vcpu_scan_ioapic arch/x86/kvm/x86.c:7449 [inline] RIP: 0010:vcpu_enter_guest arch/x86/kvm/x86.c:7602 [inline] RIP: 0010:vcpu_run arch/x86/kvm/x86.c:7874 [inline] RIP: 0010:kvm_arch_vcpu_ioctl_run+0x5296/0x7320 arch/x86/kvm/x86.c:8074 Call Trace: kvm_vcpu_ioctl+0x5c8/0x1150 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2596 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0x1de/0x1790 fs/ioctl.c:696 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT14 msr and triggers scan ioapic logic to load synic vectors into EOI exit bitmap. However, irqchip is not initialized by this simple testcase, ioapic/apic objects should not be accessed. This patch fixes it by also considering whether or not apic is present. Reported-by: syzbot+39810e6c400efadfef71@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-18KVM: Fix UAF in nested posted interrupt processingCfir Cohen1-0/+2
nested_get_vmcs12_pages() processes the posted_intr address in vmcs12. It caches the kmap()ed page object and pointer, however, it doesn't handle errors correctly: it's possible to cache a valid pointer, then release the page and later dereference the dangling pointer. I was able to reproduce with the following steps: 1. Call vmlaunch with valid posted_intr_desc_addr but an invalid MSR_EFER. This causes nested_get_vmcs12_pages() to cache the kmap()ed pi_desc_page and pi_desc. Later the invalid EFER value fails check_vmentry_postreqs() which fails the first vmlaunch. 2. Call vmlanuch with a valid EFER but an invalid posted_intr_desc_addr (I set it to 2G - 0x80). The second time we call nested_get_vmcs12_pages pi_desc_page is unmapped and released and pi_desc_page is set to NULL (the "shouldn't happen" clause). Due to the invalid posted_intr_desc_addr, kvm_vcpu_gpa_to_page() fails and nested_get_vmcs12_pages() returns. It doesn't return an error value so vmlaunch proceeds. Note that at this time we have a dangling pointer in vmx->nested.pi_desc and POSTED_INTR_DESC_ADDR in L0's vmcs. 3. Issue an IPI in L2 guest code. This triggers a call to vmx_complete_nested_posted_interrupt() and pi_test_and_clear_on() which dereferences the dangling pointer. Vulnerable code requires nested and enable_apicv variables to be set to true. The host CPU must also support posted interrupts. Fixes: 5e2f30b756a37 "KVM: nVMX: get rid of nested_get_page()" Cc: stable@vger.kernel.org Reviewed-by: Andy Honig <ahonig@google.com> Signed-off-by: Cfir Cohen <cfir@google.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-14arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.hMark Brown1-0/+1
Most architectures provide prototypes for the PCI I/O mapping operations when asm/io.h is included but SH doesn't currently do that, leading to for example warnings in sound/pci/hda/patch_ca0132.c when pci_iomap() is used on current -next. Make SH more consistent with other architectures by including asm-generic/pci_iomap.h in asm/io.h. Link: http://lkml.kernel.org/r/20181106175142.27988-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Reported-by: kbuild test robot <lkp@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-14mm: introduce common STRUCT_PAGE_MAX_SHIFT defineLogan Gunthorpe2-17/+0
This define is used by arm64 to calculate the size of the vmemmap region. It is defined as the log2 of the upper bound on the size of a struct page. We move it into mm_types.h so it can be defined properly instead of set and checked with a build bug. This also allows us to use the same define for riscv. Link: http://lkml.kernel.org/r/20181107205433.3875-2-logang@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-14alpha: fix hang caused by the bootmem removalMike Rapoport2-3/+4
The conversion of alpha to memblock as the early memory manager caused boot to hang as described at [1]. The issue is caused because for CONFIG_DISCTONTIGMEM=y case, memblock_add() is called using memory start PFN that had been rounded down to the nearest 8Mb and it caused memblock to see more memory that is actually present in the system. Besides, memblock allocates memory from high addresses while bootmem was using low memory, which broke the assumption that early allocations are always accessible by the hardware. This patch ensures that memblock_add() is using the correct PFN for the memory start and forces memblock to use bottom-up allocations. [1] https://lkml.org/lkml/2018/11/22/1032 Link: http://lkml.kernel.org/r/1543233216-25833-1-git-send-email-rppt@linux.ibm.com Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Tested-by: Meelis Roos <mroos@linux.ee> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-14Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Invalidate the caches before clearing the DMA buffer via the non-cacheable alias in the FORCE_CONTIGUOUS case" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: dma-mapping: Fix FORCE_CONTIGUOUS buffer clearing
2018-12-14Merge tag 'powerpc-4.20-4' of ↵Linus Torvalds12-20/+80
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One notable fix for our change to split pt_regs between user/kernel, we forgot to update BPF to use the user-visible type which was an ABI break for BPF programs. A slightly ugly but minimal fix to do_syscall_trace_enter() so that we use tracehook_report_syscall_entry() properly. We'll rework the code in next to avoid the empty if body. Seven commits fixing bugs in the new papr_scm (Storage Class Memory) driver. The driver was finally able to be tested on the other hypervisor which exposed several bugs. The fixes are all fairly minimal at least. Fix a crash in our MSI code if an MSI-capable device is plugged into a non-MSI capable PHB, only seen on older hardware (MPC8378). Fix our legacy serial code to look for "stdout-path" since the device trees were updated to use that instead of "linux,stdout-path". A change to the COFF zImage code to fix booting old powermacs. A couple of minor build fixes. Thanks to: Benjamin Herrenschmidt, Daniel Axtens, Dmitry V. Levin, Elvira Khabirova, Oliver O'Halloran, Paul Mackerras, Radu Rendec, Rob Herring, Sandipan Das" * tag 'powerpc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/ptrace: replace ptrace_report_syscall() with a tracehook call powerpc/mm: Fallback to RAM if the altmap is unusable powerpc/papr_scm: Use ibm,unit-guid as the iset cookie powerpc/papr_scm: Fix DIMM device registration race powerpc/papr_scm: Remove endian conversions powerpc/papr_scm: Update DT properties powerpc/papr_scm: Fix resource end address powerpc/papr_scm: Use depend instead of select powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT powerpc/boot: Fix build failures with -j 1 powerpc: Look for "stdout-path" when setting up legacy consoles powerpc/msi: Fix NULL pointer access in teardown code powerpc/mm: Fix linux page tables build with some configs powerpc: Fix COFF zImage booting on old powermacs
2018-12-11arm64: dma-mapping: Fix FORCE_CONTIGUOUS buffer clearingRobin Murphy1-1/+1
We need to invalidate the caches *before* clearing the buffer via the non-cacheable alias, else in the worst case __dma_flush_area() may write back dirty lines over the top of our nice new zeros. Fixes: dd65a941f6ba ("arm64: dma-mapping: clear buffers allocated with FORCE_CONTIGUOUS flag") Cc: <stable@vger.kernel.org> # 4.18.x- Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-12-10Merge tag 'armsoc-fixes' of ↵Linus Torvalds14-57/+53
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "The usual batch; most of them are DT tweaks to fix misdescribed hardware. Beyond that: - A bugfix for MMP2 CPU detection, it's been there quite a while but makes sense to fix now anyway. - Some power management tweaks: + disabling of CPU idle power state on Marvell Armada 7K/8K (Macchiatobin et al) + Increase of minimum voltage on BananaPi M3 + Tweak of power ramp time for DVFS on NXP/Freescale i.MX7SX - A couple of MAINTAINER updates: + MMP has a new volunteer to look after it + Mediatek adds a few keywords, IRC channel and wiki URL" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock ARM: imx: update the cpu power up timing setting on i.mx6sx Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K" ARM: dts: imx7d-pico: Describe the Wifi clock ARM: dts: realview: Fix some more duplicate regulator nodes MAINTAINERS: update entry for MMP platform ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt MAINTAINERS: mediatek: Update SoC entry ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs arm64: dts: mt7622: Drop the general purpose timer node arm64: dts: mt7622: fix no more console output on BPI-R64 board arm64: dts: mt7622: fix no more console output on rfb1 ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V
2018-12-10powerpc/ptrace: replace ptrace_report_syscall() with a tracehook callElvira Khabirova1-1/+6
Arch code should use tracehook_*() helpers, as documented in include/linux/tracehook.h, ptrace_report_syscall() is not expected to be used outside that file. The patch does not look very nice, but at least it is correct and opens the way for PTRACE_GET_SYSCALL_INFO API. Co-authored-by: Dmitry V. Levin <ldv@altlinux.org> Fixes: 5521eb4bca2d ("powerpc/ptrace: Add support for PTRACE_SYSEMU") Signed-off-by: Elvira Khabirova <lineprinter@altlinux.org> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> [mpe: Take this as a minimal fix for 4.20, we'll rework it later] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-0/+66
Pull networking fixes from David Miller: "A decent batch of fixes here. I'd say about half are for problems that have existed for a while, and half are for new regressions added in the 4.20 merge window. 1) Fix 10G SFP phy module detection in mvpp2, from Baruch Siach. 2) Revert bogus emac driver change, from Benjamin Herrenschmidt. 3) Handle BPF exported data structure with pointers when building 32-bit userland, from Daniel Borkmann. 4) Memory leak fix in act_police, from Davide Caratti. 5) Check RX checksum offload in RX descriptors properly in aquantia driver, from Dmitry Bogdanov. 6) SKB unlink fix in various spots, from Edward Cree. 7) ndo_dflt_fdb_dump() only works with ethernet, enforce this, from Eric Dumazet. 8) Fix FID leak in mlxsw driver, from Ido Schimmel. 9) IOTLB locking fix in vhost, from Jean-Philippe Brucker. 10) Fix SKB truesize accounting in ipv4/ipv6/netfilter frag memory limits otherwise namespace exit can hang. From Jiri Wiesner. 11) Address block parsing length fixes in x25 from Martin Schiller. 12) IRQ and ring accounting fixes in bnxt_en, from Michael Chan. 13) For tun interfaces, only iface delete works with rtnl ops, enforce this by disallowing add. From Nicolas Dichtel. 14) Use after free in liquidio, from Pan Bian. 15) Fix SKB use after passing to netif_receive_skb(), from Prashant Bhole. 16) Static key accounting and other fixes in XPS from Sabrina Dubroca. 17) Partially initialized flow key passed to ip6_route_output(), from Shmulik Ladkani. 18) Fix RTNL deadlock during reset in ibmvnic driver, from Thomas Falcon. 19) Several small TCP fixes (off-by-one on window probe abort, NULL deref in tail loss probe, SNMP mis-estimations) from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (93 commits) net/sched: cls_flower: Reject duplicated rules also under skip_sw bnxt_en: Fix _bnxt_get_max_rings() for 57500 chips. bnxt_en: Fix NQ/CP rings accounting on the new 57500 chips. bnxt_en: Keep track of reserved IRQs. bnxt_en: Fix CNP CoS queue regression. net/mlx4_core: Correctly set PFC param if global pause is turned off. Revert "net/ibm/emac: wrong bit is used for STA control" neighbour: Avoid writing before skb->head in neigh_hh_output() ipv6: Check available headroom in ip6_xmit() even without options tcp: lack of available data can also cause TSO defer ipv6: sr: properly initialize flowi6 prior passing to ip6_route_output mlxsw: spectrum_switchdev: Fix VLAN device deletion via ioctl mlxsw: spectrum_router: Relax GRE decap matching check mlxsw: spectrum_switchdev: Avoid leaking FID's reference count mlxsw: spectrum_nve: Remove easily triggerable warnings ipv4: ipv6: netfilter: Adjust the frag mem limit when truesize changes sctp: frag_point sanity check tcp: fix NULL ref in tail loss probe tcp: Do not underestimate rwnd_limited net: use skb_list_del_init() to remove from RX sublists ...
2018-12-09Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Three fixes: a boot parameter re-(re-)fix, a retpoline build artifact fix and an LLVM workaround" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/vdso: Drop implicit common-page-size linker flag x86/build: Fix compiler support check for CONFIG_RETPOLINE x86/boot: Clear RSDP address in boot_params for broken loaders
2018-12-09Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull kprobes fixes from Ingo Molnar: "Two kprobes fixes: a blacklist fix and an instruction patching related corruption fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: kprobes/x86: Blacklist non-attachable interrupt functions kprobes/x86: Fix instruction patching corruption when copying more than one RIP-relative instruction
2018-12-09Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds2-25/+42
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Two fixes: a large-system fix and an earlyprintk fix with certain resolutions" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/earlyprintk/efi: Fix infinite loop on some screen widths x86/efi: Allocate e820 buffer before calling efi_exit_boot_service
2018-12-09Merge tag 'mvebu-fixes-4.20-1' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson2-31/+0
mvebu fixes for 4.20 Adding CPU Idle state in the device tree for Armada 8040 seems to breaks boot on some board, so let's revert it waiting for a better solution. * tag 'mvebu-fixes-4.20-1' of git://git.infradead.org/linux-mvebu: Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K" Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-09Merge tag 'sunxi-fixes-for-4.20' of ↵Olof Johansson1-2/+2
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into fixes Allwinner fixes for 4.20 One small fix for a regulator range on the Banana Pi M3 * tag 'sunxi-fixes-for-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-09Merge tag 'imx-fixes-4.20-3' of ↵Olof Johansson3-4/+29
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.20, round 3: - A couple of fixes on imx7d-pico and imx7d-nitrogen7 boards to correct the description of the Wifi clock. - Change SW2ISO count to get a safer ARM LDO ramp-up time, so that different boards can be covered. This fixes the ARM LDO failure seen on some customer boards. * tag 'imx-fixes-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock ARM: imx: update the cpu power up timing setting on i.mx6sx ARM: dts: imx7d-pico: Describe the Wifi clock Signed-off-by: Olof Johansson <olof@lixom.net>
2018-12-09powerpc/mm: Fallback to RAM if the altmap is unusableOliver O'Halloran1-3/+16
The "altmap" is used to provide a pool of memory that is reserved for the vmemmap backing of hot-plugged memory. This is useful when adding large amount of ZONE_DEVICE memory to a system with a limited amount of normal memory. On ppc64 we use huge pages to map the vmemmap which requires the backing storage to be contigious and aligned to the hugepage size. The altmap implementation allows for the altmap provider to reserve a few PFNs at the start of the range for it's own uses and when this occurs the first chunk of the altmap is not usable for hugepage mappings. On hash there is no sane way to fall back to a normal sized page mapping so we fail the allocation. This results in memory hotplug failing with ENOMEM when the new range doesn't fall into an existing vmemmap block. This patch handles this case by falling back to using system memory rather than failing if we cannot allocate from the altmap. This fallback should only ever be used for the first vmemmap block so it should not cause excess memory consumption. Fixes: 7b73d978a5d0 ("mm: pass the vmem_altmap to vmemmap_populate") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-09powerpc/papr_scm: Use ibm,unit-guid as the iset cookieOliver O'Halloran1-0/+12
The interleave set cookie is used to determine if a label stored in the metadata space should be applied to the current region. This is important in the case of NVDIMMs since the firmware may change the interleaving configuration of a DIMM which would invalidate the existing labels. In our case the hypervisor hides those details from us so we don't really care, but libnvdimm still requires the interleave set cookie to be non-zero. For our purposes we just need the set cookie to be unique and fixed for a given PAPR SCM region and using the unit-guid (really a UUID) is fine for this purpose. Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> [mpe: Use kernel types (u64)] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-09powerpc/papr_scm: Fix DIMM device registration raceOliver O'Halloran1-0/+3
When a new nvdimm device is registered with libnvdimm via nvdimm_create() it is added as a device on the nvdimm bus. The probe function for the DIMM driver is potentially quite slow so actually registering and probing the device is done in an async domain rather than immediately after device creation. This can result in a race where the region device (created 2nd) is probed first and fails to activate at boot. To fix this we use the same approach as the ACPI/NFIT driver which is to check that all the DIMM devices registered successfully. LibNVDIMM provides the nvdimm_bus_count_dimms() function which synchronises with the async domain and verifies that the dimm was successfully registered with the bus. If either of these does not occur then we bail. Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-09powerpc/papr_scm: Remove endian conversionsOliver O'Halloran1-3/+3
The return values of a h-call are returned in the CPU registers and written to the provided buffer by the plpar_hcall() wrapper. As a result the values written to memory are always in the native endian and should not be byte swapped. The inital implementation of the H-Call interface was done in qemu and the returned values were byte swapped unnecessarily in both the hypervisor and in the driver so this was only noticed when bringing up the PowerVM implementation. Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-09powerpc/papr_scm: Update DT propertiesOliver O'Halloran1-5/+11
The ibm,unit-sizes property was originally specified as an array of two u32s corresponding to the memory block size, and the number of blocks available in that region. A fairly last-minute change to the SCM DT specification was splitting that into two seperate u64 properties: ibm,block-sizes and ibm,number-of-blocks that convey the same information. No firmware / hypervisor that emitted the ibm,unit-size property ever appeared in the wild. Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> [mpe: Use kernel types (u32/u64)] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-08Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A few clk driver fixes this time: - Introduce protected-clock DT binding to fix breakage on qcom sdm845-mtp boards where the qspi clks introduced this merge window cause the firmware on those boards to take down the system if we try to read the clk registers - Fix a couple off-by-one errors found by Dan Carpenter - Handle failure in zynq fixed factor clk driver to avoid using uninitialized data" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: zynqmp: Off by one in zynqmp_is_valid_clock() clk: mmp: Off by one in mmp_clk_add() clk: mvebu: Off by one bugs in cp110_of_clk_get() arm64: dts: qcom: sdm845-mtp: Mark protected gcc clocks clk: qcom: Support 'protected-clocks' property dt-bindings: clk: Introduce 'protected-clocks' property clk: zynqmp: handle fixed factor param query error
2018-12-07Merge tag 'arm64-fixes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Avoid sending IPIs with interrupts disabled" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: hibernate: Avoid sending cross-calling with interrupts disabled
2018-12-07x86/vdso: Drop implicit common-page-size linker flagNick Desaulniers1-2/+2
GNU linker's -z common-page-size's default value is based on the target architecture. arch/x86/entry/vdso/Makefile sets it to the architecture default, which is implicit and redundant. Drop it. Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Reported-by: Dmitry Golovin <dima@golovin.in> Reported-by: Bill Wendling <morbo@google.com> Suggested-by: Dmitry Golovin <dima@golovin.in> Suggested-by: Rui Ueyama <ruiu@google.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Andy Lutomirski <luto@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Fangrui Song <maskray@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com Link: https://bugs.llvm.org/show_bug.cgi?id=38774 Link: https://github.com/ClangBuiltLinux/linux/issues/31
2018-12-07arm64: hibernate: Avoid sending cross-calling with interrupts disabledWill Deacon1-1/+1
Since commit 3b8c9f1cdfc50 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings"), a call to flush_icache_range() will use an IPI to cross-call other online CPUs so that any stale instructions are flushed from their pipelines. This triggers a WARN during the hibernation resume path, where flush_icache_range() is called with interrupts disabled and is therefore prone to deadlock: | Disabling non-boot CPUs ... | CPU1: shutdown | psci: CPU1 killed. | CPU2: shutdown | psci: CPU2 killed. | CPU3: shutdown | psci: CPU3 killed. | WARNING: CPU: 0 PID: 1 at ../kernel/smp.c:416 smp_call_function_many+0xd4/0x350 | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.20.0-rc4 #1 Since all secondary CPUs have been taken offline prior to invalidating the I-cache, there's actually no need for an IPI and we can simply call __flush_icache_range() instead. Cc: <stable@vger.kernel.org> Fixes: 3b8c9f1cdfc50 ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") Reported-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Tested-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Tested-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-12-07powerpc/papr_scm: Fix resource end addressOliver O'Halloran1-1/+1
Fix an off-by-one error in the memory resource range. This resource is used to determine the address range of the memory to be hot-plugged as ZONE_DEVICE memory. The current end address results in the kernel attempting to map an additional memblock and the hypervisor may reject the mapping resulting in the entire hot-plug failing. Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-07powerpc/papr_scm: Use depend instead of selectOliver O'Halloran1-2/+1
Making PAPR_SCM select LIBNVDIMM results in circular dependencies in Kconfig when another symbol depends on it. Fix this by replacing the select with a depends. Fixes: b5beae5e224f ("powerpc/pseries: Add driver for PAPR SCM regions") Reported-by: Alastair D'Silva <alastair@d-silva.org> Signed-off-by: Oliver O'Halloran <oohall@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-07powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENTSandipan Das3-1/+11
Now that there are different variants of pt_regs for userspace and kernel, the uapi for the BPF_PROG_TYPE_PERF_EVENT program type must be changed by exporting the user_pt_regs structure instead of the pt_regs structure that is in-kernel only. Fixes: 002af9391bfb ("powerpc: Split user/kernel definitions of struct pt_regs") Signed-off-by: Sandipan Das <sandipan@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-06Merge branch 'spectre' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-0/+10
Pull ARM spectre fix from Russell King: "Exynos folk noticed that CPU hotplug wasn't working with their kernel configuration, and have tested this as fixing the problem" * 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: ensure that processor vtables is not lost after boot
2018-12-06Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds4-10/+16
Pull ARM fixes from Russell King: "Some small fixes that have been accumulated: - Chris Cole noticed that in a SMP environment, the DMA cache coherence handling can produce undesirable results in a corner case - Propagate that fix for ARMv7M as well - Fix a false positive with source fortification - Fix an uninitialised return that Nathan Jones spotted" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8816/1: dma-mapping: fix potential uninitialized return ARM: 8815/1: V7M: align v7m_dma_inv_range() with v7 counterpart ARM: 8814/1: mm: improve/fix ARM v7_dma_inv_range() unaligned address handling ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE
2018-12-06Merge tag 'csky-4.20-rc6' of github.com:c-sky/csky-linuxLinus Torvalds1-2/+2
Pull C-SKY fixes from Guo Ren: - bugfix for tlb_get_pgd() error - update MAINTAINERS file for C-SKY drivers * tag 'csky-4.20-rc6' of github.com:c-sky/csky-linux: csky: bugfix tlb_get_pgd error. MAINTAINERS: add maintainer for C-SKY drivers
2018-12-06ARM: ensure that processor vtables is not lost after bootRussell King1-0/+10
Marek Szyprowski reported problems with CPU hotplug in current kernels. This was tracked down to the processor vtables being located in an init section, and therefore discarded after kernel boot, despite being required after boot to properly initialise the non-boot CPUs. Arrange for these tables to end up in .rodata when required. Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Fixes: 383fb3ee8024 ("ARM: spectre-v2: per-CPU vtables to work around big.Little systems") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-12-06kprobes/x86: Blacklist non-attachable interrupt functionsAndrea Righi1-0/+4
These interrupt functions are already non-attachable by kprobes. Blacklist them explicitly so that they can show up in /sys/kernel/debug/kprobes/blacklist and tools like BCC can use this additional information. Signed-off-by: Andrea Righi <righi.andrea@gmail.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: David S. Miller <davem@davemloft.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yonghong Song <yhs@fb.com> Link: http://lkml.kernel.org/r/20181206095648.GA8249@Dell Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clockFabio Estevam1-2/+7
According to bindings/regulator/fixed-regulator.txt the 'clocks' and 'clock-names' properties are not valid ones. In order to turn on the Wifi clock the correct location for describing the CLKO2 clock is via a mmc-pwrseq handle, so do it accordingly. Fixes: 56354959cfec ("ARM: dts: imx: add Boundary Devices Nitrogen7 board") Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-06powerpc/boot: Fix build failures with -j 1Michael Ellerman1-1/+1
In commit 5e9dcb6188a4 ("powerpc/boot: Expose Kconfig symbols to wrapper") we added a dependency to serial.c on autoconf.h: $(obj)/serial.c: $(obj)/autoconf.h This works when building in-tree (ie. with KBUILD_OUTPUT unset) because the obj tree is the src tree. But when building with eg. O=build and -j 1 the build fails: gcc ... -I../arch/powerpc/boot -c -o arch/powerpc/boot/serial.o arch/powerpc/boot/serial.c gcc: error: arch/powerpc/boot/serial.c: No such file or directory Why this is only happening with -j 1 is not clear, when building with -j greater than 1 somehow we decide to look for serial.c in the src tree (../), eg: gcc -I../arch/powerpc/boot -c -o arch/powerpc/boot/serial.o ../arch/powerpc/boot/serial.c Regardless we shouldn't be specifying a dependency on serial.c in the build tree, we want to add a dependency to the version in $(srctree) so fix the rule to say that. Fixes: 5e9dcb6188a4 ("powerpc/boot: Expose Kconfig symbols to wrapper") Tested-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-12-06ARM: imx: update the cpu power up timing setting on i.mx6sxAnson Huang1-1/+1
The sw2iso count should cover ARM LDO ramp-up time, the MAX ARM LDO ramp-up time may be up to more than 100us on some boards, this patch sets sw2iso to 0xf (~384us) which is the reset value, and it is much more safe to cover different boards, since we have observed that some customer boards failed with current setting of 0x2. Fixes: 05136f0897b5 ("ARM: imx: support arm power off in cpuidle for i.mx6sx") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller1-0/+66
Alexei Starovoitov says: ==================== pull-request: bpf 2018-12-05 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) fix bpf uapi pointers for 32-bit architectures, from Daniel. 2) improve verifer ability to handle progs with a lot of branches, from Alexei. 3) strict btf checks, from Yonghong. 4) bpf_sk_lookup api cleanup, from Joe. 5) other misc fixes ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-05Merge tag 'arc-4.20-rc6' of ↵Linus Torvalds20-20/+133
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes/updates from Vineet Gupta - Missing reads{x}()/writes{x}() getting in the way of some drivers [Jose Abreu] - Builds defaulting to ARCv2 ISA based configsa [Kevin Hilman] - Misc fixes * tag 'arc-4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: io.h: Implement reads{x}()/writes{x}() ARC: change defconfig defaults to ARCv2 arc: [devboards] Add support of NFSv3 ACL ARC: mm: fix uninitialised signal code in do_page_fault ARC: [plat-hsdk] Enable DW APB GPIO support ARCv2: boot log unaligned access in use ARC: IOC: panic if kernel was started with previously enabled IOC ARC: remove redundant 'default n' from Kconfig
2018-12-05Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"Baruch Siach2-31/+0
This reverts commit 8ed46368776b3bc93d74c1f8f2bfb9fd8a9ad805. This commit breaks boot on Armada 8K based systems. Reverting it makes affected systems boot again. Reported-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2018-12-05x86/build: Fix compiler support check for CONFIG_RETPOLINEMasahiro Yamada1-3/+7
It is troublesome to add a diagnostic like this to the Makefile parse stage because the top-level Makefile could be parsed with a stale include/config/auto.conf. Once you are hit by the error about non-retpoline compiler, the compilation still breaks even after disabling CONFIG_RETPOLINE. The easiest fix is to move this check to the "archprepare" like this commit did: 829fe4aa9ac1 ("x86: Allow generating user-space headers without a compiler") Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Zhenzhong Duan <zhenzhong.duan@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com> Fixes: 4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support") Link: http://lkml.kernel.org/r/1543991239-18476-1-git-send-email-yamada.masahiro@socionext.com Link: https://lkml.org/lkml/2018/12/4/206 Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-05ARM: dts: imx7d-pico: Describe the Wifi clockFabio Estevam1-1/+21
The Wifi chip should be clocked by a 32kHz clock coming from i.MX7D CLKO2 output pin, so describe the pinmux and clock hierarchy in the device tree to allow the Wifi chip to be properly clocked. Managed to successfully test Wifi with such change. Used the standard nvram.txt file provided by TechNexion, which selects an external 32kHz clock for the Wifi chip by default. Fixes: 99a52450c707 ("ARM: dts: imx7d-pico: Add Wifi support") Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-12-04ARM: 8816/1: dma-mapping: fix potential uninitialized returnNathan Jones1-1/+1
While trying to use the dma_mmap_*() interface, it was noticed that this interface returns strange values when passed an incorrect length. If neither of the if() statements fire then the return value is uninitialized. In the worst case it returns 0 which means the caller will think the function succeeded. Fixes: 1655cf8829d8 ("ARM: dma-mapping: Remove traces of NOMMU code") Signed-off-by: Nathan Jones <nathanj439@gmail.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-12-04ARM: 8815/1: V7M: align v7m_dma_inv_range() with v7 counterpartVladimir Murzin1-5/+9
Chris has discovered and reported that v7_dma_inv_range() may corrupt memory if address range is not aligned to cache line size. Since the whole cache-v7m.S was lifted form cache-v7.S the same observation applies to v7m_dma_inv_range(). So the fix just mirrors what has been done for v7 with a little specific of M-class. Cc: Chris Cole <chris@sageembedded.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-12-04ARM: 8814/1: mm: improve/fix ARM v7_dma_inv_range() unaligned address handlingChris Cole1-3/+5
This patch addresses possible memory corruption when v7_dma_inv_range(start_address, end_address) address parameters are not aligned to whole cache lines. This function issues "invalidate" cache management operations to all cache lines from start_address (inclusive) to end_address (exclusive). When start_address and/or end_address are not aligned, the start and/or end cache lines are first issued "clean & invalidate" operation. The assumption is this is done to ensure that any dirty data addresses outside the address range (but part of the first or last cache lines) are cleaned/flushed so that data is not lost, which could happen if just an invalidate is issued. The problem is that these first/last partial cache lines are issued "clean & invalidate" and then "invalidate". This second "invalidate" is not required and worse can cause "lost" writes to addresses outside the address range but part of the cache line. If another component writes to its part of the cache line between the "clean & invalidate" and "invalidate" operations, the write can get lost. This fix is to remove the extra "invalidate" operation when unaligned addressed are used. A kernel module is available that has a stress test to reproduce the issue and a unit test of the updated v7_dma_inv_range(). It can be downloaded from http://ftp.sageembedded.com/outgoing/linux/cache-test-20181107.tgz. v7_dma_inv_range() is call by dmac_[un]map_area(addr, len, direction) when the direction is DMA_FROM_DEVICE. One can (I believe) successfully argue that DMA from a device to main memory should use buffers aligned to cache line size, because the "clean & invalidate" might overwrite data that the device just wrote using DMA. But if a driver does use unaligned buffers, at least this fix will prevent memory corruption outside the buffer. Signed-off-by: Chris Cole <chris@sageembedded.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2018-12-04Merge branch 'parisc-4.20-4' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "On parisc, use -ffunction-sections compiler option when building 32-bit kernel modules to avoid sysfs-warnings when loading such modules. This got broken with kernel v4.18" * 'parisc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable -ffunction-sections for modules on 32-bit kernel
2018-12-04kprobes/x86: Fix instruction patching corruption when copying more than one ↵Masami Hiramatsu1-1/+1
RIP-relative instruction After copy_optimized_instructions() copies several instructions to the working buffer it tries to fix up the real RIP address, but it adjusts the RIP-relative instruction with an incorrect RIP address for the 2nd and subsequent instructions due to a bug in the logic. This will break the kernel pretty badly (with likely outcomes such as a kernel freeze, a crash, or worse) because probed instructions can refer to the wrong data. For example putting kprobes on cpumask_next() typically hits this bug. cpumask_next() is normally like below if CONFIG_CPUMASK_OFFSTACK=y (in this case nr_cpumask_bits is an alias of nr_cpu_ids): <cpumask_next>: 48 89 f0 mov %rsi,%rax 8b 35 7b fb e2 00 mov 0xe2fb7b(%rip),%esi # ffffffff82db9e64 <nr_cpu_ids> 55 push %rbp ... If we put a kprobe on it and it gets jump-optimized, it gets patched by the kprobes code like this: <cpumask_next>: e9 95 7d 07 1e jmpq 0xffffffffa000207a 7b fb jnp 0xffffffff81f8a2e2 <cpumask_next+2> e2 00 loop 0xffffffff81f8a2e9 <cpumask_next+9> 55 push %rbp This shows that the first two MOV instructions were copied to a trampoline buffer at 0xffffffffa000207a. Here is the disassembled result of the trampoline, skipping the optprobe template instructions: # Dump of assembly code from 0xffffffffa000207a to 0xffffffffa00020ea: 54 push %rsp ... 48 83 c4 08 add $0x8,%rsp 9d popfq 48 89 f0 mov %rsi,%rax 8b 35 82 7d db e2 mov -0x1d24827e(%rip),%esi # 0xffffffff82db9e67 <nr_cpu_ids+3> This dump shows that the second MOV accesses *(nr_cpu_ids+3) instead of the original *nr_cpu_ids. This leads to a kernel freeze because cpumask_next() always returns 0 and for_each_cpu() never ends. Fix this by adding 'len' correctly to the real RIP address while copying. [ mingo: Improved the changelog. ] Reported-by: Michael Rodin <michael@rodin.online> Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org # v4.15+ Fixes: 63fef14fc98a ("kprobes/x86: Make insn buffer always ROX and use text_poke()") Link: http://lkml.kernel.org/r/153504457253.22602.1314289671019919596.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 17:35:18 +0000