summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2009-04-27powerpc/82xx: Rework Embedded Planet ep8248e platform to use of_mdioGrant Likely1-6/+3
This patch modifies the bitbanged MDIO driver in the ep8248e platform code to use the common of_mdio infrastructure. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-27net: Rework pasemi_mac driver to use of_mdio infrastructureGrant Likely1-27/+5
This patch simplifies the driver by making use of more common code. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Tested-by: Olof Johansson <olof@lixom.net> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-22rfkill: remove deprecated state constantsJohannes Berg1-2/+2
I only did superficial review, but these constants are stupid to have and without proper warnings nobody will review the code anyway, no amount of shouting will help. Also fix wimax to use correct states. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-13Merge branch 'for-linus' of ↵Linus Torvalds2-18/+4
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits) Input: i8042 - add HP DV9700 to the noloop list Input: arrange drivers/input/misc/Makefile in alphabetical order Input: add AD7879 Touchscreen driver Input: add AD7877 touchscreen driver Input: bf54x-keys - fix typo in warning Input: add driver for S1 button of rb532 Input: generic driver for rotary encoders on GPIOs Input: hilkbd - fix crash when removing hilkbd module Input: atkbd - add quirk for Fujitsu Siemens Amilo PA 1510 Input: atkbd - consolidate force release quirk setup Input: add accelerated touchscreen support for Marvell Zylonite Input: ucb1400_ts, mainstone-wm97xx - add BTN_TOUCH events Input: wm97xx - use disable_irq_nosync() for Mainstone Input: wm97xx - add BTN_TOUCH event to wm97xx to use it with Android Input: fix polling of /proc/bus/input/devices Input: psmouse - add newline to OLPC HGPK touchpad debugging Input: ati_remote2 - check module params Input: ati_remote2 - add per device attrs Input: ati_remote2 - complete suspend support Input: stop autorepeat timer on key release ...
2009-04-13Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds10-19/+57
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: add linux kernel support for YMM state x86: fix wrong section of pat_disable & make it static x86: Fix section mismatches in mpparse x86: fix set_fixmap to use phys_addr_t x86: Document get_user_pages_fast() x86, intr-remap: fix eoi for interrupt remapping without x2apic
2009-04-13cpufreq: use smp_call_function_[single|many]() in acpi-cpufreq.cAndrew Morton1-15/+9
Atttempting to rid us of the problematic work_on_cpu(). Just use smp_call_fuction_single() here. This repairs a 10% sysbench(oltp)+mysql regression which Mike reported, due to commit 6b44003e5ca66a3fffeb5bc90f40ada2c4340896 Author: Andrew Morton <akpm@linux-foundation.org> Date: Thu Apr 9 09:50:37 2009 -0600 work_on_cpu(): rewrite it to create a kernel thread on demand It seems that the kernel calls these acpi-cpufreq functions at a quite high frequency. Valdis Kletnieks also reports that this causes 70-90 forks per second on his hardware. Cc: Valdis.Kletnieks@vt.edu Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Zhao Yakui <yakui.zhao@intel.com> Acked-by: Dave Jones <davej@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Tested-by: Mike Galbraith <efault@gmx.de> Cc: "Zhang, Yanmin" <yanmin_zhang@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Ingo Molnar <mingo@elte.hu> [ Made it use smp_call_function_many() instead of looping over cpu's with smp_call_function_single() - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: percpu: unbreak alpha percpu mutex: have non-spinning mutexes on s390 by default
2009-04-13Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds157-0/+15708
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (60 commits) microblaze_v8: Add MAINTAINERS fragment microblaze_v8: Uartlite for Microblaze microblaze_v8: Makefiles for Microblaze cpu microblaze_v8: Kconfig patches microblaze_v8: Interrupt handling and timer support microblaze_v8: syscalls.h microblaze_v8: pci headers microblaze_v8: Kbuild file microblaze_v8: string.h thread_info.h microblaze_v8: unistd.h microblaze_v8: fcntl.h sockios.h ucontext.h microblaze_v8: pool.h socket.h microblaze_v8: device.h param.h topology.h microblaze_v8: headers files entry.h current.h mman.h registers.h sembuf.h microblaze_v8: namei.h microblaze_v8: gpio.h, serial.h microblaze_v8: headers simple files - empty or redirect to asm-generic microblaze_v8: sigcontext.h siginfo.h microblaze_v8: termbits.h termios.h microblaze_v8: stats headers ...
2009-04-12x86: add linux kernel support for YMM stateSuresh Siddha4-2/+15
Impact: save/restore Intel-AVX state properly between tasks Intel Advanced Vector Extensions (AVX) introduce 256-bit vector processing capability. More about AVX at http://software.intel.com/sites/avx Add OS support for YMM state management using xsave/xrstor infrastructure to support AVX. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1239402084.27006.8057.camel@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12x86: fix wrong section of pat_disable & make it staticMarcin Slusarz1-1/+1
pat_disable cannot be __cpuinit anymore because it's called from pat_init and the callchain looks like this: pat_disable [cpuinit] <- pat_init <- generic_set_all <- ipi_handler <- set_mtrr <- (other non init/cpuinit functions) WARNING: arch/x86/mm/built-in.o(.text+0x449e): Section mismatch in reference from the function pat_init() to the function .cpuinit.text:pat_disable() The function pat_init() references the function __cpuinit pat_disable(). This is often because pat_init lacks a __cpuinit annotation or the annotation of pat_disable is wrong. Non CONFIG_X86_PAT version of pat_disable is static inline, so this version can be static too (and there are no callers outside of this file). Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <49DFB055.6070405@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-12x86: Fix section mismatches in mpparseRakib Mullick1-3/+4
Impact: fix section mismatch In arch/x86/kernel/mpparse.c, smp_reserve_bootmem() has been called and also refers to a function which is in .init section. Thus causes the first warning. And check_irq_src() also requires an __init, because it refers to an .init section. Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <b9df5fa10904102004g51265d9axc8d07278bfdb6ba0@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10x86: fix set_fixmap to use phys_addr_tMasami Hiramatsu6-18/+24
Impact: fix kprobes crash on 32-bit with RAM above 4G Use phys_addr_t for receiving a physical address argument instead of unsigned long. This allows fixmap to handle pages higher than 4GB on x86-32. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: systemtap-ml <systemtap@sources.redhat.com> Cc: Gary Hade <garyhade@us.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <49DE3695.6040800@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300Linus Torvalds137-55/+9130
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: Separate out the proc- and unit-specific header directories from the general Move arch headers from include/asm-mn10300/ to arch/mn10300/include/asm/.
2009-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frvLinus Torvalds114-0/+8626
* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-frv: FRV: Move to arch/frv/include/asm/ FRV: Fix indentation errors to keep git-am happy when moving arch header files
2009-04-10Separate out the proc- and unit-specific header directories from the generalDavid Howells34-64/+30
MN10300 arch headers and place them instead in the same directories as contain the .c files for the processor and unit implementations. This permits the symlinks include/asm/proc and include/asm/unit to be dispensed with. This does, however, require that #include <asm/proc/xxx.h> be converted to #include <proc/xxx.h> and similarly for asm/unit -> unit. Signed-off-by: David Howells <dhowells@redhat.com>
2009-04-10Move arch headers from include/asm-mn10300/ to arch/mn10300/include/asm/.David Howells121-14/+9123
Signed-off-by: David Howells <dhowells@redhat.com>
2009-04-10x86: Document get_user_pages_fast()Andy Grover1-0/+16
While better than get_user_pages(), the usage of gupf(), especially the return values and the fact that it can potentially only partially pin the range, warranted some documentation. Signed-off-by: Andy Grover <andy.grover@oracle.com> Cc: npiggin@suse.de Cc: akpm@linux-foundation.org LKML-Reference: <1239320729-3262-1-git-send-email-andy.grover@oracle.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10x86, intr-remap: fix eoi for interrupt remapping without x2apicWeidong Han1-1/+4
To simplify level irq migration in the presence of interrupt-remapping, Suresh used a virtual vector (io-apic pin number) to eliminate io-apic RTE modification. Level triggered interrupt will appear as an edge to the local apic cpu but still as level to the IO-APIC. So in addition to do the local apic EOI, it still needs to do IO-APIC directed EOI to clear the remote IRR bit in the IO-APIC RTE. Pls refer to Suresh's patch for more details (commit 0280f7c416c652a2fd95d166f52b199ae61122c0). Now interrupt remapping is decoupled from x2apic, it also needs to do the directed EOI for apic. Otherwise, apic interrupts won't work correctly. Signed-off-by: Weidong Han <weidong.han@intel.com> Cc: iommu@lists.linux-foundation.org Cc: Weidong Han <weidong.han@intel.com> Cc: suresh.b.siddha@intel.com Cc: dwmw2@infradead.org Cc: allen.m.kay@intel.com LKML-Reference: <1239355037-22856-1-git-send-email-weidong.han@intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-10FRV: Move to arch/frv/include/asm/David Howells114-0/+8626
Move arch headers from include/asm-frv/ to arch/frv/include/asm/. Signed-off-by: David Howells <dhowells@redhat.com>
2009-04-09x86: fix set_fixmap to use phys_addr_tMasami Hiramatsu4-6/+7
Use phys_addr_t for receiving a physical address argument instead of unsigned long. This allows fixmap to handle pages higher than 4GB on x86-32. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-09MN10300: Kill MN10300's own profiling KconfigDavid Howells2-25/+0
Kill MN10300's own profiling Kconfig as this is superfluous given that the profiling options have moved to init/Kconfig and arch/Kconfig. Not only is this now superfluous, but the dependencies are not correct. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-09Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds7-18/+35
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: cpu_debug remove execute permission x86: smarten /proc/interrupts output for new counters x86: DMI match for the Dell DXP061 as it needs BIOS reboot x86: make 64 bit to use default_inquire_remote_apic x86, setup: un-resequence mode setting for VGA 80x34 and 80x60 modes x86, intel-iommu: fix X2APIC && !ACPI build failure
2009-04-09Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: tracing: consolidate documents blktrace: pass the right pointer to kfree() tracing/syscalls: use a dedicated file header tracing: append a comma to INIT_FTRACE_GRAPH
2009-04-09MN10300: Convert obsolete no_irq_type to no_irq_chipThomas Gleixner1-1/+1
Convert the last remaining users to no_irq_chip. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-09mutex: have non-spinning mutexes on s390 by defaultHeiko Carstens2-0/+4
Impact: performance regression fix for s390 The adaptive spinning mutexes will not always do what one would expect on virtualized architectures like s390. Especially the cpu_relax() loop in mutex_spin_on_owner might hurt if the mutex holding cpu has been scheduled away by the hypervisor. We would end up in a cpu_relax() loop when there is no chance that the state of the mutex changes until the target cpu has been scheduled again by the hypervisor. For that reason we should change the default behaviour to no-spin on s390. We do have an instruction which allows to yield the current cpu in favour of a different target cpu. Also we have an instruction which allows us to figure out if the target cpu is physically backed. However we need to do some performance tests until we can come up with a solution that will do the right thing on s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> LKML-Reference: <20090409184834.7a0df7b2@osiris.boeblingen.de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-09x86: cpu_debug remove execute permissionJaswinder Singh Rajput2-0/+0
It seems by mistake these files got execute permissions so removing it. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> LKML-Reference: <1239211186.9037.2.camel@ht.satnam> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-09tracing/syscalls: use a dedicated file headerFrederic Weisbecker2-1/+4
Impact: fix build warnings and possibe compat misbehavior on IA64 Building a kernel on ia64 might trigger these ugly build warnings: CC arch/ia64/ia32/sys_ia32.o In file included from arch/ia64/ia32/sys_ia32.c:55: arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined In file included from include/linux/elf.h:7, from include/linux/module.h:14, from include/linux/ftrace.h:8, from include/linux/syscalls.h:68, from arch/ia64/ia32/sys_ia32.c:18: arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition [...] sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h to import the syscalls tracing prototypes. But including ftrace.h can pull too much things for a low level file, especially on ia64 where the ia32 private headers conflict with higher level headers. Now we isolate the syscall tracing headers in their own lightweight file. Reported-by: Tony Luck <tony.luck@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jason Baron <jbaron@redhat.com> Cc: "Frank Ch. Eigler" <fche@redhat.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Jiaying Zhang <jiayingz@google.com> Cc: Michael Rubin <mrubin@google.com> Cc: Martin Bligh <mbligh@google.com> Cc: Michael Davidson <md@google.com> LKML-Reference: <20090408184058.GB6017@nowhere> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds10-28/+29
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Hook up sys_preadv and sys_pwritev sparc64: add_node_ranges() must be __init serial: sunsu: sunsu_kbd_ms_init needs to be __devinit sparc: Fix section mismatch warnings in cs4231 sound driver. sparc64: Fix section mismatch warnings in PCI controller drivers. sparc64: Fix section mismatch warnings in power driver. sparc64: get_cells() can't be marked __init
2009-04-08Merge branch 'release' of ↵Linus Torvalds2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] wire up preadv/pwritev system calls
2009-04-08Merge branch 'release' of ↵Linus Torvalds5-27/+37
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: x86 ACPI: Add support for Always Running APIC timer ACPI x86: Make aperf/mperf MSR access in acpi_cpufreq read_only ACPI x86: Cleanup acpi_cpufreq structures related to aperf/mperf ACPICA: delete check for AML access to port 0x81-83 ACPI: WMI: use .notify method instead of installing handler directly sony-laptop: use .notify method instead of installing handler directly panasonic-laptop: use .notify method instead of installing handler directly fujitsu-laptop: use .notify method instead of installing hotkey handler directly fujitsu-laptop: use .notify method instead of installing handler directly ACPI: video: use .notify method instead of installing handler directly ACPI: thermal: use .notify method instead of installing handler directly ACPI battery: fix async boot oops ACPI: delete acpi_device.g_list NULL noise: drivers/platform/x86/panasonic-laptop.c ACPI: cpufreq: remove dupilcated #include ACPI: Adjust Kelvin offset to match local implementation ACPI: convert acpi_device_lock spinlock to mutex
2009-04-08Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds29-92/+861
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 5446/1: ohci-at91: Limit vbus_pin assignment to the size of the array [ARM] 5445/1: AT91: Remove flexible array from USBH platform data [ARM] 5447/1: Add SZ_32K [ARM] omap: fix omap1 clock usecount decrement bug [ARM] pxa: register AC97 controller devices [ARM] pxa/csb701: do not register devices on non-csb726 boads [ARM] pxa/colibri: get rid of set_irq_type() [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL [ARM] pxa/cm-x2xx: fix ucb1400 not being registered [ARM] pxa: Add support for suspend on PalmTX, T5 and LD [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight [ARM] pxa: Palm Tungsten E2 basic support [ARM] pxa/em-x270: add libertas device registration [ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_power
2009-04-08[IA64] wire up preadv/pwritev system callsTony Luck2-1/+5
Gerd Hoffmann added these to Linux. Let ia64 use them. Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-04-08[ARM] 5445/1: AT91: Remove flexible array from USBH platform dataJustin Waters1-1/+1
The flexible array in the USBH platform data is not safe to copy. The compiler will not allocate any extra memory for the non-init platform data structure (in the *_devices.c files) since it isn't given any defaults at compile time. When the probe function attempts to address that array, it will actually attempt to access data in an adjacent structure. Since there are currently no (known) implementations of the at91 USBH IP with more than 2 vbus pins, I am capping the value at 2. If somebody tries to assign more, then the compiler will produce a warning. Signed-off-by: Justin Waters <justin.waters@timesys.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-08[ARM] 5447/1: Add SZ_32KLinus Walleij1-0/+1
This adds a SZ_32K define to the available sizes. I need it for an upcoming platform support. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-04-08x86: smarten /proc/interrupts output for new countersHidetoshi Seto1-1/+1
Now /proc/interrupts of tip tree has new counters: PLT: Platform interrupts Format change of output, as like that by commit: commit 7a81d9a7da03d2f27840d659f97ef140d032f609 x86: smarten /proc/interrupts output should be applied to these new counters too. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Cc: Jan Beulich <jbeulich@novell.com> LKML-Reference: <49C98DEA.8060208@jp.fujitsu.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08Merge commit 'v2.6.30-rc1' into x86/urgentIngo Molnar82-397/+504
Merge reason: fix to be queued up depends on upstream facilities Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08x86: DMI match for the Dell DXP061 as it needs BIOS rebootAlan Cox1-0/+8
Closes http://bugzilla.kernel.org/show_bug.cgi?12901 Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk> LKML-Reference: <20090326204524.4454.8776.stgit@localhost.localdomain> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08x86: make 64 bit to use default_inquire_remote_apicYinghai Lu1-2/+2
Impact: restore old behavior for flat and phys_flat Signed-off-by: Yinhai Lu <yinghai@kernel.org. LKML-Reference: <49DCBBF1.8080903@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-08sparc: Hook up sys_preadv and sys_pwritevDavid S. Miller3-4/+6
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08sparc64: add_node_ranges() must be __initDavid S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08sparc64: Fix section mismatch warnings in PCI controller drivers.David S. Miller5-20/+20
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08sparc64: Fix section mismatch warnings in power driver.David S. Miller1-1/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08sparc64: get_cells() can't be marked __initDavid S. Miller1-2/+1
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-04-08Merge branch 'next' into for-linusDmitry Torokhov2-18/+4
2009-04-07Merge branches 'release', 'APERF', 'ARAT', 'misc', 'kelvin', 'device-lock' ↵Len Brown4-1/+8
and 'bjorn.notify' into release
2009-04-07x86 ACPI: Add support for Always Running APIC timerVenkatesh Pallipadi3-0/+8
Add support for Always Running APIC timer, CPUID_0x6_EAX_Bit2. This bit means the APIC timer continues to run even when CPU is in deep C-states. The advantage is that we can use LAPIC timer on these CPUs always, and there is no need for "slow to read and program" external timers (HPET/PIT) and the timer broadcast logic and related code in C-state entry and exit. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07ACPI x86: Make aperf/mperf MSR access in acpi_cpufreq read_onlyVenkatesh Pallipadi1-5/+10
Do not write zeroes to APERF and MPERF by ondemand governor. With this change, other users can share these MSRs for reads. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07ACPI x86: Cleanup acpi_cpufreq structures related to aperf/mperfVenkatesh Pallipadi1-22/+20
Change structure name to make the code cleaner and simpler. No functionality change in this patch. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-07Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: branch tracer, intel-iommu: fix build with CONFIG_BRANCH_TRACER=y branch tracer: Fix for enabling branch profiling makes sparse unusable ftrace: Correct a text align for event format output Update /debug/tracing/README tracing/ftrace: alloc the started cpumask for the trace file tracing, x86: remove duplicated #include ftrace: Add check of sched_stopped for probe_sched_wakeup function-graph: add proper initialization for init task tracing/ftrace: fix missing include string.h tracing: fix incorrect return type of ns2usecs() tracing: remove CALLER_ADDR2 from wakeup tracer blktrace: fix pdu_len when tracing packet command requests blktrace: small cleanup in blk_msg_write() blktrace: NUL-terminate user space messages tracing: move scripts/trace/power.pl to scripts/tracing/power.pl
2009-04-07x86, setup: un-resequence mode setting for VGA 80x34 and 80x60 modesH. Peter Anvin1-10/+23
Impact: Fixes these modes on at least one system The rewrite of the setup code into C resequenced the font setting and register reprogramming phases of configuring nonstandard VGA modes which use 480 scan lines in text mode. However, there exists at least one board (Micro-Star MS-7383 version 2.0) on which this resequencing causes an unusable display. Revert to the original sequencing: set up 480-line mode, install the font, and then adjust the vertical end register appropriately. This failure was masked by the fact that the 480-line setup was broken until checkin 5f641356127712fbdce0eee120e5ce115860c17f (therefore this is not a -stable candidate bug fix.) Reported-by: Andi Kleen <andi@firstfloor.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 09:45:05 +0000