Age | Commit message (Collapse) | Author | Files | Lines |
|
CONFIG_FHANDLE is required by systemd >= 210 to spawn a serial TTY.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This patch adds the same options to multi_v7_defconfig as were added to
tegra_defconfig in commit d1c912c1001f "ARM: tegra: defconfig updates".
(CONFIG_POWER_RESET_AS3722 is already enabled here.)
Suggested-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/boards
Merge "ARM: tegra: defconfig updates for 3.15" from Stephen Warren:
The following options are enabled:
- ams AS3722 is used as system PMIC for Tegra124 based Venice2.
- NXP PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras.
- GSPCA to support the webcam on Venice2.
- Allocate 64 MiB for CMA by default; the default 16MiB is not enough
for the majority of use-cases. This can still be overridden by the cma
command-line option.
* tag 'tegra-for-3.15-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: defconfig updates
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
With Marvell Dove now being part of the multi_v7 family, add some Dove
specific drivers to multi_v7 defconfig.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into next/boards
Merge "Allwinner defconfig additions for 3.15" from Maxime Ripard:
Enables SPI and SID drivers in sunxi defconfig
* tag 'sunxi-defconfig-for-3.15' of https://github.com/mripard/linux:
ARM: sunxi: Enable A31 SPI and SID in the defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A couple of lines in multi_v5_defconfig appear twice,
causing a harmless Kconfig warning. This removes one
of the two copies.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into next/boards
Merge "mvebu defconfig changes for v3.15 (incremental pull #2)" from Jason Cooper
- add multi_v5_defconfig
- add mvebu_v5_defconfig
- kirkwood: add HP T5325 devices
* tag 'mvebu-defconfig-3.15-2' of git://git.infradead.org/linux-mvebu:
ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig
ARM: config: Add mvebu_v5_defconfig
ARM: config: Add a multi_v5_defconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
Merge "Third Round of Renesas ARM Based SoC Defconfig Updates for v3.15" from
Simon Horman:
* r7s72100 (RZ/A1H) based Genmai board
- update defconfig for I2C usage
* r8a7791 (R-Car M2) based Koelsch board
- Enable SDHI, GPIO and regulators in defconfig
* r8a7790 (R-Car H2) based Lager board
- Enable RSPI and MTD_M25P80
* emev2 (Emma Mobile) based KZM9D board
- Remove legacy KZM9D defconfig
* Multiplatform
- Add defconfig for shmobile multiplatform
* tag 'renesas-defconfig3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r7s72100: update defconfig for I2C usage
ARM: shmobile: koelsch: Enable SDHI, GPIO and regulators in defconfig
ARM: shmobile: Get rid of legacy KZM9D defconfig
ARM: shmobile: Add defconfig for shmobile multiplatform
ARM: shmobile: lager defconfig: Enable RSPI and MTD_M25P80
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
Merge "Third Round of Renesas ARM Based SoC Boards Updates for v3.15" from
Simon Horman:
* r7s72100 SoC (RZ/A1H) based Genmai board
- Set proper DMA masks for Ether device
* r8a7791 (R-Car M2) based Koelsch board
- Remove Koelsch DT reference legacy clock bits
- Set proper DMA masks for Ether device
- Add DU device to koelsch-reference
- Refactor clock lookup hack in koelsch-reference
- Add SDHI devices
* r8a7790 (R-Car H2) based Lager board
- Remove Lager DT reference legacy clock bits
- Set proper DMA masks for Ether device
- Add internal USB PCI support
- Add QSPI pinmux
- Sdd SDHI0/2 support
* emev2 (Emma Mobile EV2) based kzm9d board
- Remove KZM9D board code
* r8a7778 (R-Car M1) based bock-w board
- Set proper DMA masks for Ether device
* r8a7740 (R-Mobile A1) based Armadillo 800 EVA board
- Set proper DMA masks for Ether device
* tag 'renesas-boards3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Remove Lager DT reference legacy clock bits
ARM: shmobile: Remove Koelsch DT reference legacy clock bits
ARM: shmobile: Remove KZM9D board code
ARM: shmobile: Genmai: set proper DMA masks for Ether device
ARM: shmobile: Koelsch: set proper DMA masks for Ether device
ARM: shmobile: Lager: set proper DMA masks for Ether device
ARM: shmobile: BOCK-W: set proper DMA masks for Ether device
ARM: shmobile: Armadillo 800 EVA: set proper DMA masks for Ether device
ARM: shmobile: koelsch-reference: Add DU device
ARM: shmobile: koelsch-reference: Refactor clock lookup hack
ARM: shmobile: lager-reference: Add DU device
ARM: shmobile: lager-reference: Refactor clock lookup hack
ARM: shmobile: lager: Add internal USB PCI support
ARM: shmobile: lager legacy: Add QSPI pinmux
ARM: shmobile: lager: add SDHI0/2 support
ARM: shmobile: Add SDHI devices for legacy Koelsch
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/boards
Keystone SOC updates for 3.15
- Enable Watchdog and GPIO config
- Enable LED driver config
- Enable NAND and EMIF driver config
* tag 'keystone-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: config: keystone: enable AEMIF/NAND support
ARM: config: keystone: enable led support
ARM: config: keystone: enable gpio support
ARM: config: keystone: enable watchdog support
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux into next/boards
* tag 'pxa' of https://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux:
ARM: pxa: add gpio keys information
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Switching from corgikbd to matrixkbd corgi has lost support for few switches.
Readd them through gpio-keys-polled device (-polled, since scoop does
not provide IRQ for GPIO).
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>
|
|
- ams AS3722 is used as system PMIC for Tegra124 based Venice2.
- NXP PCA9546 is used in Cardhu Tegra30 board to connect to 3 cameras.
- GSPCA to support the webcam on Venice2.
- Allocate 64 MiB for CMA by default; the default 16MiB is not enough
for the majority of use-cases. This can still be overridden by the cma
command-line option.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Bryan Wu <pengw@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Keystone SoC uses the same NAND driver as Davinci, so enable
Davinci NAND and AEIMF that provides interface for it.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and
serial console as part of the standard multi_v7_defconfig.
Signed-off-by: Kumar Gala <galak@codeaurora.org>
[khilman: removed non-qcom changes]
Signed-off-by: Kevin Hilman <khilman@linaro.org>
|
|
The HP T5325 has a PCI based VGA controller. Add the frame buffer
driver, and frame buffer support to the defconfig's. Additionally
add the soc audio framework and the necessary codec.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
Now that there is both v5 and v7 systems in mach-mvebu, the
mvebu_defconfig is not sufficient, since these systems cannot be
combined. Add a v5 defconfig which is based on kirkwood_defconfig,
but purely DT.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
To allow regression build testing of multi v5 systems, add a
multi_v5_defconfig, similar to the multi_v7_defconfig. This is based
on kirkwood_defconfig, but with a few other boards added which claim
to be MULTI_v5.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
next/boards
Merge "mvebu defconfig changes for v3.15" from Jason Cooper:
- dove
- remove UBI support
- enable watchdog
- mvebu
- rename mvebu_defconfig mvebu_v7_defconfig
- enable audio
- enable watchdog
- add Armada 375 and 38x
* tag 'mvebu-defconfig-3.15' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: update defconfigs for Armada 375 and 38x
ARM: dove: Enable watchdog support in the defconfig
ARM: mvebu: Enable watchdog support in defconfig
ARM: mvebu: enable audio options in mvebu_defconfig
ARM: mvebu: rename mvebu_defconfig to mvebu_v7_defconfig
ARM: dove: Remove UBI support from defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
Merge "Second Round of Renesas ARM Based SoC Defconfig Updates for v3.15" from
Simon Horman:
* r7s72100 SoC (RZ/A1H) based Genmai board
- Enable RSPI
* r8a7790 (R-Car H2) based Koelsch board
- Enable I2C, RSPI and MTD_M25P80
* r8a7779 (R-Car H1) based Lager board
- Enable sound
* tag 'renesas-defconfig2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: genmai defconfig: Enable RSPI
ARM: shmobile: koelsch defconfig: Enable RSPI and MTD_M25P80
ARM: shmobile: lager: add sound support on defconfig
ARM: shmobile: koelsch: Enable I2C in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
Merge "Second Round of Renesas ARM Based SoC Board Updates for v3.15" from
Simon Horman:
* r7s72100 (RZ/A1H) based Genmai board
- Enable SH ethernet
- Add RSPI support
* r8a7791 (R-Car M2) based Koelsch board
- Add QSPI support
- Add I2C support
- Pass SH ethernet PHY IRQ
* r8a7790 (R-Car H2) based Lager board
- Switch QSPI to named IRQs
- Add sound support
- Add USB0 cable detection workaround
- Pass SH ethernet PHY IRQ
* r8a7779 (R-Car H1) based Marzen board
- Revert conditional selection of SMSC_PHY
* r8a7778 (R-Car M1) based Bock-W board
- Use wp-gpios instead of WP pin
* tag 'renesas-boards2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: genmai: Enable r7s72100-ether
ARM: shmobile: lager legacy: Switch QSPI to named IRQs
ARM: shmobile: koelsch legacy: Add QSPI support
ARM: shmobile: genmai legacy: Add RSPI support
Revert "ARM: shmobile: marzen: Conditionally select SMSC_PHY"
ARM: shmobile: lager: add sound support
ARM: shmobile: Lager USB0 cable detection workaround
ARM: shmobile: bockw: use wp-gpios instead of WP pin
ARM: shmobile: koelsch: Add I2C support
ARM: shmobile: Koelsch: pass Ether PHY IRQ
ARM: shmobile: Lager: pass Ether PHY IRQ
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
Merge "Renesas ARM based SoC Defconfig Updates for v3.15" from Simon Horman:
* Renesas ARM based SoC boards (Global)
enable CONFIG_DEVTMPFS in defconfig
* r8a7791 SoC (R-Car M2) based Koelsch board
- Enable SATA
* r8a7790 SoC (R-Car H2) based Lager board
- Enable SATA, VIN and ADV7180 decoder in defconfig
* tag 'renesas-defconfig-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: ape6evm: enable CONFIG_DEVTMPFS in defconfig
ARM: shmobile: armadillo: enable CONFIG_DEVTMPFS in defconfig
ARM: shmobile: bockw: enable CONFIG_DEVTMPFS in defconfig
ARM: shmobile: genmai: enable CONFIG_DEVTMPFS in defconfig
ARM: shmobile: kzm9d: enable CONFIG_DEVTMPFS in defconfig
ARM: shmobile: kzm9g: enable CONFIG_DEVTMPFS in defconfig
ARM: shmobile: lager: enable CONFIG_DEVTMPFS in defconfig
ARM: shmobile: mackerel: enable CONFIG_DEVTMPFS in defconfig
ARM: shmobile: marzen: enable CONFIG_DEVTMPFS in defconfig
ARM: shmobile: lager: Enable SATA in defconfig
ARM: shmobile: koelsch: Enable DEVTMPFS_MOUNT in defconfig
ARM: shmobile: koelsch: Enable SATA in defconfig
ARM: shmobile: lager: Enable VIN along with ADV7180 decoder in defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards
Merge "Renesas ARM based SoC Board Updates for v3.15" from Simon Horman:
* r8a7791 (R-Car M2) based Koelsch board
- Fix error return code check from clk_get()
- Add SATA0 support
- Conditionally select MICREL_PHY for Multiplatform
* r8a7790 (R-Car H2) based Lager board
- Add USBHS support
- Fix error return code check from clk_get()
- Add SATA support
- Make spi_flash_data const
- Add VIN1 SoC camera support
- Conditionally select CONFIG_MICREL_PHY
* r8a7778 (R-Car M1) based Bock-W board
- Add USB Func DMAEngine support
- Use HPBIF DMAEngine for sound
- Use SSI DMAEngine for sound
* emev2 (Emma Mobile EV2) based kzm9d board
- Use common clock framework
* r8a773a0 (SH-Mobile AG5) based kzm9g board
- Add zboot support
* Many boards
- Conditionally select SMSC_PHY
* tag 'renesas-boards-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (21 commits)
ARM: shmobile: Remove Lager USBHS UDC ifdefs
ARM: shmobile: lager: Add USBHS support
ARM: shmobile: koelsch: fix error return code check from clk_get()
ARM: shmobile: lager: fix error return code check from clk_get()
ARM: shmobile: marzen: Conditionally select SMSC_PHY
ARM: shmobile: mackerel: Conditionally select SMSC_PHY
ARM: shmobile: kzm9d: Conditionally select SMSC_PHY
ARM: shmobile: bockw: Sort Kconfig node's selections
ARM: shmobile: armadillo800eva: Conditionally select SMSC_PHY
ARM: shmobile: ape6evm: Conditionally select SMSC_PHY
ARM: shmobile: koelsch: Add SATA0 support
ARM: shmobile: lager: Add SATA support
ARM: shmobile: lager: Make spi_flash_data const
ARM: shmobile: kzm9d: Use common clock framework
ARM: shmobile: lager: Add VIN1 SoC camera support
ARM: mach-shmobile: kzm9g: add zboot support
ARM: shmobile: koelsch: Conditionally select MICREL_PHY for Multiplatform
ARM: shmobile: bockw: add USB Func DMAEngine support
ARM: shmobile: bockw: use HPBIF DMAEngine for sound
ARM: shmobile: bockw: use SSI DMAEngine for sound
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Select the correct I2C driver and activate EEPROM support to have a
slave device for testing. Also activate i2c-dev, so i2c-tools will work.
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Lager DT reference is these days built for multiplatform
only which means that CCF comes with the package. Remove
unused legacy code ifdefs to clean up the code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Koelsch DT reference is these days built for multiplatform
only which means that CCF comes with the package. Remove
unused legacy code ifdefs to clean up the code.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Get rid of KZM9D board code written in C. This version of the
C board code was used in the case of multiplatform, but these
days DT can be used instead, so because of that simply get rid
of the C code to simplify and save space.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
This commit enables the Armada 375 and Armada 38x support in
mvebu_defconfig and multi_v7_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
Now that we have watchdog support, let's add it to the defconfig.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
Now that we have proper support for Armada 370/XP watchdog
let's enable it in mvebu_defconfig and multi_v7_defconfig.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
The Keystone GPIO functionality is ready for use, so LED support can be
enabled in config.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
Enable enable GPIO support for Keystone by setting CONFIG_GPIOLIB and
CONFIG_GPIO_DAVINCI options in keystone_defconfig.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
Keystone SoC uses the same watchdog driver as Davinci, so
enable WDT and core used by it.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
Enable the following:
* regulators (needed for SDHI)
* SDHI
* GPIO
* GPIO keys
* GPIO LEDs
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Get rid of the kzm9d_defconfig. The KZM9D is now supported
as DT only in case of EMEV2 is selected in the kernel
configuration.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.
Currently, the code works without DMA masks but as we would have to enable
CONFIG_HIGHMEM to access the full board memory in the future, when support for
NETIF_F_SG would be added to the 'sh_eth' driver as well, the correct DMA masks
should start to matter...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.
Currently, the code works without DMA masks but as we would have to enable
CONFIG_HIGHMEM to access the full board memory in the future, when support for
NETIF_F_SG would be added to the 'sh_eth' driver as well, the correct DMA masks
should start to matter...
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
The DU device has no DT bindings yet, instantiate it as a platform
device for now.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: omitted DTS portion]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Make the clock lookup hack more generic to ease the addition of more
devices.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
The DU device has no DT bindings yet, instantiate it as a platform
device for now.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: omitted DTS portion]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Make the clock lookup hack more generic to ease the addition of more
devices.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
This adds internal PCI USB host devices to R-Car H2 Lager board.
Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
[damm@opensource.se: Rebased and reworked to only include USB1 and USB2]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
|
|
Since at least the Armada 370 SoC has audio support, it makes sense to
enable the corresponding kernel configuration options in
mvebu_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
|
|
This is intended to be a base for a defconfig to cover all
shmobile multiplatform boards. It currently includes configuration
for the following boards:
* KZM9D
* Lager
* Koelsch
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull twi tracing fixes from Steven Rostedt:
"Two urgent fixes in the tracing utility.
The first is a fix for the way the ring buffer stores timestamps.
After a restructure of the code was done, the ring buffer timestamp
logic missed the fact that the first event on a sub buffer is to have
a zero delta, as the full timestamp is stored on the sub buffer
itself. But because the delta was not cleared to zero, the timestamp
for that event will be calculated as the real timestamp + the delta
from the last timestamp. This can skew the timestamps of the events
and have them say they happened when they didn't really happen.
That's bad.
The second fix is for modifying the function graph caller site. When
the stop machine was removed from updating the function tracing code,
it missed updating the function graph call site location. It is still
modified as if it is being done via stop machine. But it's not. This
can lead to a GPF and kernel crash if the function graph call site
happens to lie between cache lines and one CPU is executing it while
another CPU is doing the update. It would be a very hard condition to
hit, but the result is severe enough to have it fixed ASAP"
* tag 'trace-fixes-v3.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/x86: Use breakpoints for converting function graph caller
ring-buffer: Fix first commit on sub-buffer having non-zero delta
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 EFI fixes from Peter Anvin:
"A few more EFI-related fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Check status field to validate BGRT header
x86/efi: Fix 32-bit fallout
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Kevin Hilman:
"A collection of ARM SoC fixes for v3.14-rc1.
Mostly a collection of Kconfig, device tree data and compilation fixes
along with fix to drivers/phy that fixes a boot regression on some
Marvell mvebu platforms"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
dma: mv_xor: Silence a bunch of LPAE-related warnings
ARM: ux500: disable msp2 device tree node
ARM: zynq: Reserve not DMAable space in front of the kernel
ARM: multi_v7_defconfig: Select CONFIG_SOC_DRA7XX
ARM: imx6: Initialize low-power mode early again
ARM: pxa: fix various compilation problems
ARM: pxa: fix compilation problem on AM300EPD board
ARM: at91: add Atmel's SAMA5D3 Xplained board
spi/atmel: document clock properties
mmc: atmel-mci: document clock properties
ARM: at91: enable USB host on at91sam9n12ek board
ARM: at91/dt: fix sama5d3 ohci hclk clock reference
ARM: at91/dt: sam9263: fix compatibility string for the I2C
ata: sata_mv: Fix probe failures with optional phys
drivers: phy: Add support for optional phys
drivers: phy: Make NULL a valid phy reference
ARM: fix HAVE_ARM_TWD selection for OMAP and shmobile
ARM: moxart: move DMA_OF selection to driver
ARM: hisi: fix kconfig warning on HAVE_ARM_TWD
|