summaryrefslogtreecommitdiff
path: root/arch/xtensa/kernel
AgeCommit message (Collapse)AuthorFilesLines
2018-04-06Merge tag 'pci-v4.17-changes' of ↵Linus Torvalds1-86/+8
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...
2018-04-02mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64()Dominik Brodowski1-1/+1
Using the ksys_fadvise64_64() helper allows us to avoid the in-kernel calls to the sys_fadvise64_64() syscall. The ksys_ prefix denotes that this function is meant as a drop-in replacement for the syscall. In particular, it uses the same calling convention as ksys_fadvise64_64(). Some compat stubs called sys_fadvise64(), which then just passed through the arguments to sys_fadvise64_64(). Get rid of this indirection, and call ksys_fadvise64_64() directly. This patch is part of a series which removes in-kernel calls to syscalls. On this basis, the syscall entry path can be streamlined. For details, see http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm@kvack.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-02-28xtensa/PCI: Use generic pci_mmap_resource_range()David Woodhouse1-86/+8
Commit f719582435 ("PCI: Add pci_mmap_resource_range() and use it for ARM64") added this generic function with the intent of using it everywhere and ultimately killing the old arch-specific implementations. Remove the xtensa-specific pci_mmap_page_range() and use the generic pci_mmap_resource_range() instead. Xtensa can mmap I/O port space, so supply the xtensa-specific pci_iobar_pfn() required to make that work. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> [bhelgaas: changelog] Signed-off-by: Bjorn Helgaas <helgaas@kernel.org> Acked-by: Max Filippov <jcmvbkbc@gmail.com>
2018-02-16xtensa: support DMA buffers in high memoryMax Filippov1-10/+30
If a DMA buffer is allocated in high memory and kernel mapping is required use dma_common_contiguous_remap to map buffer to the vmalloc region and dma_common_free_remap to unmap it. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2018-02-01Merge tag 'devicetree-for-4.16' of ↵Linus Torvalds1-12/+0
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree updates from Rob Herring: - Convert to use memblock_virt_alloc in DT code which supports bootmem arches. With this we can remove the arch specific early_init_dt_alloc_memory_arch() functions. - Enable running the DT unittests on UML - Use SPDX license tags on DT files - Fix early FDT kconfig ifdef logic - Clean-up unittest Makefile - Fix function comment for of_irq_parse_raw - Add missing documentation for linux,initrd-{start,end} properties - Clean-up of binding examples using uppercase hex - Add trivial devices W83773G and Infineon TLV493D-A1B6 - Add missing STM32 SoC bindings - Various small binding doc fixes * tag 'devicetree-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (23 commits) xtensa: remove arch specific early DT functions x86: remove arch specific early_init_dt_alloc_memory_arch nios2: remove arch specific early_init_dt_alloc_memory_arch mips: remove arch specific early_init_dt_alloc_memory_arch metag: remove arch specific early DT functions cris: remove arch specific early DT functions libfdt: remove unnecessary include directive from <linux/libfdt.h> of: unittest: refactor Makefile of/fdt: use memblock_virt_alloc for early alloc of: Use SPDX license tag for DT files of/fdt: Fix #ifdef dependency of early flattree declarations dt-bindings: h8300 clocksource: correct spelling of pulse dt-bindings: imx6q-pcie: Add required property for i.MX6SX mmc: Don't reference Linux-specific OF_GPIO_ACTIVE_LOW flag in DT binding dt-bindings: Use lower case hex in unit-addresses dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000 dt-bindings: Add Infineon TLV493D-A1B6 dt-bindings: mailbox: ti,message-manager: Fix interrupt name error dt-bindings: chosen: Document linux,initrd-{start,end} dt-bindings: arm: document supported STM32 SoC family ...
2018-01-30Merge branch 'siginfo-linus' of ↵Linus Torvalds1-7/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo cleanups from Eric Biederman: "Long ago when 2.4 was just a testing release copy_siginfo_to_user was made to copy individual fields to userspace, possibly for efficiency and to ensure initialized values were not copied to userspace. Unfortunately the design was complex, it's assumptions unstated, and humans are fallible and so while it worked much of the time that design failed to ensure unitialized memory is not copied to userspace. This set of changes is part of a new design to clean up siginfo and simplify things, and hopefully make the siginfo handling robust enough that a simple inspection of the code can be made to ensure we don't copy any unitializied fields to userspace. The design is to unify struct siginfo and struct compat_siginfo into a single definition that is shared between all architectures so that anyone adding to the set of information shared with struct siginfo can see the whole picture. Hopefully ensuring all future si_code assignments are arch independent. The design is to unify copy_siginfo_to_user32 and copy_siginfo_from_user32 so that those function are complete and cope with all of the different cases documented in signinfo_layout. I don't think there was a single implementation of either of those functions that was complete and correct before my changes unified them. The design is to introduce a series of helpers including force_siginfo_fault that take the values that are needed in struct siginfo and build the siginfo structure for their callers. Ensuring struct siginfo is built correctly. The remaining work for 4.17 (unless someone thinks it is post -rc1 material) is to push usage of those helpers down into the architectures so that architecture specific code will not need to deal with the fiddly work of intializing struct siginfo, and then when struct siginfo is guaranteed to be fully initialized change copy siginfo_to_user into a simple wrapper around copy_to_user. Further there is work in progress on the issues that have been documented requires arch specific knowledge to sort out. The changes below fix or at least document all of the issues that have been found with siginfo generation. Then proceed to unify struct siginfo the 32 bit helpers that copy siginfo to and from userspace, and generally clean up anything that is not arch specific with regards to siginfo generation. It is a lot but with the unification you can of siginfo you can already see the code reduction in the kernel" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (45 commits) signal/memory-failure: Use force_sig_mceerr and send_sig_mceerr mm/memory_failure: Remove unused trapno from memory_failure signal/ptrace: Add force_sig_ptrace_errno_trap and use it where needed signal/powerpc: Remove unnecessary signal_code parameter of do_send_trap signal: Helpers for faults with specialized siginfo layouts signal: Add send_sig_fault and force_sig_fault signal: Replace memset(info,...) with clear_siginfo for clarity signal: Don't use structure initializers for struct siginfo signal/arm64: Better isolate the COMPAT_TASK portion of ptrace_hbptriggered ptrace: Use copy_siginfo in setsiginfo and getsiginfo signal: Unify and correct copy_siginfo_to_user32 signal: Remove the code to clear siginfo before calling copy_siginfo_from_user32 signal: Unify and correct copy_siginfo_from_user32 signal/blackfin: Remove pointless UID16_SIGINFO_COMPAT_NEEDED signal/blackfin: Move the blackfin specific si_codes to asm-generic/siginfo.h signal/tile: Move the tile specific si_codes to asm-generic/siginfo.h signal/frv: Move the frv specific si_codes to asm-generic/siginfo.h signal/ia64: Move the ia64 specific si_codes to asm-generic/siginfo.h signal/powerpc: Remove redefinition of NSIGTRAP on powerpc signal: Move addr_lsb into the _sigfault union for clarity ...
2018-01-30xtensa: remove arch specific early DT functionsRob Herring1-12/+0
Now that the DT core code handles bootmem arches, we can remove the xtensa specific early_init_dt_alloc_memory_arch function. The common early_init_dt_add_memory_arch can be used too now that xtensa switched to memblock. Cc: Chris Zankel <chris@zankel.net> Cc: linux-xtensa@linux-xtensa.org Acked-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org>
2018-01-29Merge tag 'xtensa-20180129' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds15-241/+189
Pull Xtensa updates from Max Filippov: - add SSP support - add KASAN support - improvements to xtensa-specific assembly: - use ENTRY and ENDPROC consistently - clean up and unify word alignment macros - clean up and unify fixup marking - use 'call' instead of 'callx' where possible - various cleanups: - consiolidate kernel stack size related definitions - replace #ifdef'fed/commented out debug printk statements with pr_debug - use struct exc_table instead of flat array for exception handling data - build kernel with -mtext-section-literals; simplify xtensa linker script - fix futex_atomic_cmpxchg_inatomic() * tag 'xtensa-20180129' of git://github.com/jcmvbkbc/linux-xtensa: (21 commits) xtensa: fix futex_atomic_cmpxchg_inatomic xtensa: shut up gcc-8 warnings xtensa: print kernel sections info in mem_init xtensa: use generic strncpy_from_user with KASAN xtensa: use __memset in __xtensa_clear_user xtensa: add support for KASAN xtensa: move fixmap and kmap just above the KSEG xtensa: don't clear swapper_pg_dir in paging_init xtensa: extract init_kio xtensa: implement early_trap_init xtensa: clean up exception handling structure xtensa: clean up custom-controlled debug output xtensa: enable stack protector xtensa: print hardware config ID on startup xtensa: consolidate kernel stack size related definitions xtensa: clean up functions in assembly code xtensa: clean up word alignment macros in assembly code xtensa: clean up fixups in assembly code xtensa: use call instead of callx in assembly code xtensa: build kernel with text-section-literals ...
2018-01-22signal/ptrace: Add force_sig_ptrace_errno_trap and use it where neededEric W. Biederman1-7/+1
There are so many places that build struct siginfo by hand that at least one of them is bound to get it wrong. A handful of cases in the kernel arguably did just that when using the errno field of siginfo to pass no errno values to userspace. The usage is limited to a single si_code so at least does not mess up anything else. Encapsulate this questionable pattern in a helper function so that the userspace ABI is preserved. Update all of the places that use this pattern to use the new helper function. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-12-17xtensa: use generic strncpy_from_user with KASANMax Filippov1-0/+2
This enables KASAN check of the destination buffer. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-16xtensa: add support for KASANMax Filippov2-1/+9
Cover kernel addresses above 0x90000000 by the shadow map. Enable HAVE_ARCH_KASAN when MMU is enabled. Provide kasan_early_init that fills shadow map with writable copies of kasan_zero_page. Call kasan_early_init right after mmu initialization in the setup_arch. Provide kasan_init that allocates proper shadow map pages from the memblock and puts these pages into the shadow map for addresses from VMALLOC area to the end of KSEG. Call kasan_init right after memblock initialization. Don't use KASAN for the boot code, MMU and KASAN initialization and page fault handler. Make kernel stack size 4 times larger when KASAN is enabled to avoid stack overflows. GCC 7.3, 8 or newer is required to build the xtensa kernel with KASAN. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-16xtensa: extract init_kioMax Filippov1-4/+6
KIO region placement may be specified in the device tree, that's why it's initialized with the rest of MMU after the early_init_devtree. In order to support KASAN the MMU must be initialized earlier. Separate KIO initialization from the rest of MMU initialization. Reinitialize KIO if its location is specified in the device tree. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-16xtensa: clean up exception handling structureMax Filippov2-20/+32
Instead of using flat array of longs use normal C structure and generate EXC_TABLE_* constants in the asm-offsets.c Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-16xtensa: clean up custom-controlled debug outputMax Filippov5-51/+38
Replace #ifdef'fed/commented out debug printk statements with pr_debug. Replace printk statements with pr_* equivalents. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-16xtensa: enable stack protectorMax Filippov3-0/+15
The implementation is adopted from the ARM arch. GCC 7.3, 8 or newer is required for building the xtensa kernel with SSP. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-10xtensa: print hardware config ID on startupMax Filippov1-0/+9
Print hardware config ID on startup and config ID recorded in the configuration if it doesn't match one read from the hardware. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-10xtensa: clean up word alignment macros in assembly codeMax Filippov1-4/+1
Remove duplicate definitions of ALIGN/src_b/__src_b and SSA8/ssa8/__ssa8 from assembly sources and put single definition into asm/asmmacro.h Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-10xtensa: clean up fixups in assembly codeMax Filippov1-28/+5
Remove duplicate definitions of EX() and similar TRY/CATCH and SRC/DST macros from assembly sources and put single definition into asm/asmmacro.h Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-10xtensa: use call instead of callx in assembly codeMax Filippov4-48/+24
Now that xtensa assembly sources are compiled with -mlongcalls let the assembler and linker relax call instructions into l32r + callx where needed. This change makes the code cleaner and potentially a bit faster. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-12-10xtensa: build kernel with text-section-literalsMax Filippov6-85/+48
vmlinux.lds.S doesn't do anything special with literals, so instead of keeping them separate put them into the corresponding text sections. Drop explicit .literal sections from the vmlinux.lds.S, use standard section macros. Mark literal pool locations in the assembly sources. Unfortunately assembler doesn't put literals into .init sections and external libgcc may still have .literal sections, so sed transformation to the linker script is still needed. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-11-14Merge tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-23/+0
Pull dma-mapping updates from Christoph Hellwig: - turn dma_cache_sync into a dma_map_ops instance and remove implementation that purely are dead because the architecture doesn't support noncoherent allocations - add a flag for busses that need DMA configuration (Robin Murphy) * tag 'dma-mapping-4.15' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: turn dma_cache_sync into a dma_map_ops method sh: make dma_cache_sync a no-op xtensa: make dma_cache_sync a no-op unicore32: make dma_cache_sync a no-op powerpc: make dma_cache_sync a no-op mn10300: make dma_cache_sync a no-op microblaze: make dma_cache_sync a no-op ia64: make dma_cache_sync a no-op frv: make dma_cache_sync a no-op x86: make dma_cache_sync a no-op floppy: consolidate the dummy fd_cacheflush definition drivers: flag buses which demand DMA configuration
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman2-0/+2
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-19xtensa: make dma_cache_sync a no-opChristoph Hellwig1-23/+0
xtensa does not implement DMA_ATTR_NON_CONSISTENT allocations, so it doesn't make any sense to do any work in dma_cache_sync given that it must be a no-op when dma_alloc_attrs returns coherent memory. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com>
2017-08-10xtensa: Mark _stext and _end as char-arrays, not single char variablesMasami Hiramatsu1-3/+3
Mark _stext and _end as character arrays instead of single character variables, like include/asm-generic/sections.h does. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Chris Zankel <chris@zankel.net> Cc: David S . Miller <davem@davemloft.net> Cc: Francis Deslauriers <francis.deslauriers@efficios.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: linux-arch@vger.kernel.org Cc: linux-cris-kernel@axis.com Cc: mathieu.desnoyers@efficios.com Link: http://lkml.kernel.org/r/150172775958.27216.12951305461398200544.stgit@devbox Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-01xtensa: don't limit csum_partial export by CONFIG_NETMax Filippov1-2/+0
csum_partial and csum_partial_copy_generic are defined unconditionally and are available even when CONFIG_NET is disabled. They are used not only by the network drivers, but also by scsi and media. Don't limit these functions export by CONFIG_NET. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-06-21Merge branch 'timers/urgent' into timers/coreThomas Gleixner4-11/+5
Pick up dependent changes.
2017-06-19mm: larger stack guard gap, between vmasHugh Dickins1-1/+1
Stack guard page is a useful feature to reduce a risk of stack smashing into a different mapping. We have been using a single page gap which is sufficient to prevent having stack adjacent to a different mapping. But this seems to be insufficient in the light of the stack usage in userspace. E.g. glibc uses as large as 64kB alloca() in many commonly used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX] which is 256kB or stack strings with MAX_ARG_STRLEN. This will become especially dangerous for suid binaries and the default no limit for the stack size limit because those applications can be tricked to consume a large portion of the stack and a single glibc call could jump over the guard page. These attacks are not theoretical, unfortunatelly. Make those attacks less probable by increasing the stack guard gap to 1MB (on systems with 4k pages; but make it depend on the page size because systems with larger base pages might cap stack allocations in the PAGE_SIZE units) which should cover larger alloca() and VLA stack allocations. It is obviously not a full fix because the problem is somehow inherent, but it should reduce attack space a lot. One could argue that the gap size should be configurable from userspace, but that can be done later when somebody finds that the new 1MB is wrong for some special case applications. For now, add a kernel command line option (stack_guard_gap) to specify the stack gap size (in page units). Implementation wise, first delete all the old code for stack guard page: because although we could get away with accounting one extra page in a stack vma, accounting a larger gap can break userspace - case in point, a program run with "ulimit -S -v 20000" failed when the 1MB gap was counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK and strict non-overcommit mode. Instead of keeping gap inside the stack vma, maintain the stack guard gap as a gap between vmas: using vm_start_gap() in place of vm_start (or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few places which need to respect the gap - mainly arch_get_unmapped_area(), and and the vma tree's subtree_gap support for that. Original-patch-by: Oleg Nesterov <oleg@redhat.com> Original-patch-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Tested-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-06-14clocksource/drivers: Rename clocksource_probe to timer_probeDaniel Lezcano1-1/+1
The function name is now renamed to 'timer_probe' for consistency with the CLOCKSOURCE_OF_DECLARE => TIMER_OF_DECLARE change. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-13Merge tag 'xtensa-20170612' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds3-10/+4
Pull Xtensa fixes from Max Filippov: - don't use linux IRQ #0 in legacy irq domains: fixes timer interrupt assignment when it's hardware IRQ # is 0 and the kernel is built w/o device tree support - reduce reservation size for double exception vector literals from 48 to 20 bytes: fixes build on cores with small user exception vector - cleanups: use kmalloc_array instead of kmalloc in simdisk_init and seq_puts instead of seq_printf in c_show. * tag 'xtensa-20170612' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: don't use linux IRQ #0 xtensa: reduce double exception literal reservation xtensa: ISS: Use kmalloc_array() in simdisk_init() xtensa: Use seq_puts() in c_show()
2017-06-05xtensa: don't use linux IRQ #0Max Filippov1-5/+0
Linux IRQ #0 is reserved for error reporting and may not be used. Increase NR_IRQS for one additional slot and increase irq_domain_add_legacy parameter first_irq value to 1, so that linux IRQ #0 is not associated with hardware IRQ #0 in legacy IRQ domains. Introduce macro XTENSA_PIC_LINUX_IRQ for static translation of xtensa PIC hardware IRQ # to linux IRQ #. Use this macro in XTFPGA platform data definitions. This fixes inability to use hardware IRQ #0 in configurations that don't use device tree and allows for non-identity mapping between linux IRQ # and hardware IRQ #. Cc: stable@vger.kernel.org Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-06-05xtensa: reduce double exception literal reservationMax Filippov1-3/+3
Double exception vector only needs 20 bytes of space for 5 literals, not 48. Reduce the reservation for double exception vector literals accordingly. This fixes build for configurations with small user exception vector size. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-05-08Merge tag 'pci-v4.12-changes' of ↵Linus Torvalds1-21/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add framework for supporting PCIe devices in Endpoint mode (Kishon Vijay Abraham I) - use non-postable PCI config space mappings when possible (Lorenzo Pieralisi) - clean up and unify mmap of PCI BARs (David Woodhouse) - export and unify Function Level Reset support (Christoph Hellwig) - avoid FLR for Intel 82579 NICs (Sasha Neftin) - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig) - short-circuit config access failures for disconnected devices (Keith Busch) - remove D3 sleep delay when possible (Adrian Hunter) - freeze PME scan before suspending devices (Lukas Wunner) - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava) - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann) - add arch-specific alignment control to improve device passthrough by avoiding multiple BARs in a page (Yongji Xie) - add sysfs sriov_drivers_autoprobe to control VF driver binding (Bodong Wang) - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas) - fix crashes when unbinding host controllers that don't support removal (Brian Norris) - add driver for MicroSemi Switchtec management interface (Logan Gunthorpe) - add driver for Faraday Technology FTPCI100 host bridge (Linus Walleij) - add i.MX7D support (Andrey Smirnov) - use generic MSI support for Aardvark (Thomas Petazzoni) - make Rockchip driver modular (Brian Norris) - advertise 128-byte Read Completion Boundary support for Rockchip (Shawn Lin) - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin) - convert atomic_t to refcount_t in HV driver (Elena Reshetova) - add CPU IRQ affinity in HV driver (K. Y. Srinivasan) - fix PCI bus removal in HV driver (Long Li) - add support for ThunderX2 DMA alias topology (Jayachandran C) - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki) - add ITE 8893 bridge DMA alias quirk (Jarod Wilson) - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices (Manish Jaggi) * tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits) PCI: Don't allow unbinding host controllers that aren't prepared ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP MAINTAINERS: Add PCI Endpoint maintainer Documentation: PCI: Add userguide for PCI endpoint test function tools: PCI: Add sample test script to invoke pcitest tools: PCI: Add a userspace tool to test PCI endpoint Documentation: misc-devices: Add Documentation for pci-endpoint-test driver misc: Add host side PCI driver for PCI test function device PCI: Add device IDs for DRA74x and DRA72x dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access PCI: dwc: dra7xx: Workaround for errata id i870 dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode PCI: dwc: dra7xx: Add EP mode support PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently dt-bindings: PCI: Add DT bindings for PCI designware EP mode PCI: dwc: designware: Add EP mode support Documentation: PCI: Add binding documentation for pci-test endpoint function ixgbe: Use pcie_flr() instead of duplicating it IB/hfi1: Use pcie_flr() instead of duplicating it PCI: imx6: Fix spelling mistake: "contol" -> "control" ...
2017-05-08xtensa: Use seq_puts() in c_show()Markus Elfring1-2/+1
A string which did not contain a data format specification should be put into a sequence. Thus use the corresponding function "seq_puts". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-05-07Merge branch 'xtensa-sim-params' into xtensa-fixesMax Filippov1-3/+2
2017-05-01xtensa: clean up access to spilled registers locationsMax Filippov3-36/+17
Define macros SPILL_SLOT* that return a reference to the stack location of the spill slot for specific register and use them instead of opencoded address calculations. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-05-01xtensa: use generic tracehooksMax Filippov2-27/+14
Use tracehook_report_syscall_{entry,exit} instead of a local copy of it in do_syscall_trace. Allow tracehook to cancel syscall by returning invalid syscall number to the system_call function. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-05-01xtensa: clean up xtensa/kernel/ptrace.cMax Filippov1-73/+71
- make locally-used functions static; - drop meaningless comments and commented out code; - fix code style and alignment. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-05-01xtensa: drop unused fast_io_protect functionMax Filippov1-24/+0
fast_io_protect is not used anywhere, drop its definition. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-04-28xtensa: use ITLB_HIT_BIT instead of hardcoded numberMax Filippov1-2/+2
There is ITLB_HIT_BIT macro, no need to use 0x8 to check for TLB hit. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-04-20PCI: Add BAR index argument to pci_mmap_page_range()David Woodhouse1-1/+2
In all cases we know which BAR it is. Passing it in means that arch code (or generic code; watch this space) won't have to go looking for it again. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-04-18xtensa/PCI: Do not mmap PCI BARs to userspace as write-throughDavid Woodhouse1-20/+1
These should be uncached, not write-through. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-03-31xtensa: fix stack dump outputMax Filippov1-4/+2
Use %pB in pr_cont format string instead of calling print_symbol separately. It turns [ 19.166249] Call Trace: [ 19.167265] [<a000e50a>] [ 19.167843] __warn+0x92/0xa0 [ 19.169656] [<a000e554>] [ 19.170059] warn_slowpath_fmt+0x3c/0x40 [ 19.171934] [<a02d5bd8>] back into [ 18.123240] Call Trace: [ 18.125039] [<a000e4f6>] __warn+0x92/0xa0 [ 18.126961] [<a000e540>] warn_slowpath_fmt+0x3c/0x40 Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-03-13xtensa: ISS: update kernel command line in platform_setupMax Filippov1-3/+2
Move platform_setup call higher in initialization sequence so that it could change kernel command line. Check command line passed to simulator in ISS platform_stup and update kernel command line if there's anything. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2017-03-03Merge tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds2-2/+46
Pull Xtensa updates from Max Filippov: - clean up bootable image build targets: provide separate 'Image', 'zImage' and 'uImage' make targets that only build corresponding image type. Make 'all' build all images appropriate for a platform - allow merging vectors code into .text section as a preparation step for XIP support - fix handling external FDT when the kernel is built without BLK_DEV_INITRD support * tag 'xtensa-20170303' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: allow merging vectors into .text section xtensa: clean up bootable image build targets xtensa: move parse_tag_fdt out of #ifdef CONFIG_BLK_DEV_INITRD
2017-03-03sched/headers: Move task->mm handling methods to <linux/sched/mm.h>Ingo Molnar1-0/+1
Move the following task->mm helper APIs into a new header file, <linux/sched/mm.h>, to further reduce the size and complexity of <linux/sched.h>. Here are how the APIs are used in various kernel files: # mm_alloc(): arch/arm/mach-rpc/ecard.c fs/exec.c include/linux/sched/mm.h kernel/fork.c # __mmdrop(): arch/arc/include/asm/mmu_context.h include/linux/sched/mm.h kernel/fork.c # mmdrop(): arch/arm/mach-rpc/ecard.c arch/m68k/sun3/mmu_emu.c arch/x86/mm/tlb.c drivers/gpu/drm/amd/amdkfd/kfd_process.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/hw/hfi1/file_ops.c drivers/vfio/vfio_iommu_spapr_tce.c fs/exec.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/mmu_notifier.h include/linux/sched/mm.h kernel/fork.c kernel/futex.c kernel/sched/core.c mm/khugepaged.c mm/ksm.c mm/mmu_context.c mm/mmu_notifier.c mm/oom_kill.c virt/kvm/kvm_main.c # mmdrop_async_fn(): include/linux/sched/mm.h # mmdrop_async(): include/linux/sched/mm.h kernel/fork.c # mmget_not_zero(): fs/userfaultfd.c include/linux/sched/mm.h mm/oom_kill.c # mmput(): arch/arc/include/asm/mmu_context.h arch/arc/kernel/troubleshoot.c arch/frv/mm/mmu-context.c arch/powerpc/platforms/cell/spufs/context.c arch/sparc/include/asm/mmu_context_32.h drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/gpu/drm/i915/i915_gem_userptr.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/core/uverbs_main.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/exec.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c fs/proc/task_nommu.c fs/userfaultfd.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/events/uprobes.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/oom_kill.c mm/process_vm_access.c mm/rmap.c mm/swapfile.c mm/util.c virt/kvm/async_pf.c # mmput_async(): include/linux/sched/mm.h kernel/fork.c mm/oom_kill.c # get_task_mm(): arch/arc/kernel/troubleshoot.c arch/powerpc/platforms/cell/spufs/context.c drivers/android/binder.c drivers/gpu/drm/etnaviv/etnaviv_gem.c drivers/infiniband/core/umem.c drivers/infiniband/core/umem_odp.c drivers/infiniband/hw/mlx4/main.c drivers/infiniband/hw/mlx5/main.c drivers/infiniband/hw/usnic/usnic_uiom.c drivers/iommu/amd_iommu_v2.c drivers/iommu/intel-svm.c drivers/lguest/lguest_user.c drivers/misc/cxl/fault.c drivers/misc/mic/scif/scif_rma.c drivers/oprofile/buffer_sync.c drivers/vfio/vfio_iommu_type1.c drivers/vhost/vhost.c drivers/xen/gntdev.c fs/proc/array.c fs/proc/base.c fs/proc/task_mmu.c include/linux/sched/mm.h kernel/cpuset.c kernel/events/core.c kernel/exit.c kernel/fork.c kernel/ptrace.c kernel/sys.c kernel/trace/trace_output.c kernel/tsacct.c mm/memcontrol.c mm/memory.c mm/mempolicy.c mm/migrate.c mm/mmu_notifier.c mm/nommu.c mm/util.c # mm_access(): fs/proc/base.c include/linux/sched/mm.h kernel/fork.c mm/process_vm_access.c # mm_release(): arch/arc/include/asm/mmu_context.h fs/exec.c include/linux/sched/mm.h include/uapi/linux/sched.h kernel/exit.c kernel/fork.c Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare to move kstack_end() from <linux/sched.h> to ↵Ingo Molnar1-0/+1
<linux/sched/task_stack.h> But first update the usage sites with the new header dependency. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar4-0/+4
<linux/sched/task_stack.h> We are going to split <linux/sched/task_stack.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task_stack.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/task.h> We are going to split <linux/sched/task.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/task.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar1-0/+1
<linux/sched/hotplug.h> We are going to split <linux/sched/hotplug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/hotplug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02sched/headers: Prepare for new header dependencies before moving code to ↵Ingo Molnar2-0/+2
<linux/sched/debug.h> We are going to split <linux/sched/debug.h> out of <linux/sched.h>, which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder <linux/sched/debug.h> file that just maps to <linux/sched.h> to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 09:21:21 +0000