summaryrefslogtreecommitdiff
path: root/arch/s390
AgeCommit message (Collapse)AuthorFilesLines
2018-11-09Merge tag 's390-4.20-2' of ↵Linus Torvalds18-81/+139
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: - A fix for the pgtable_bytes misaccounting on s390. The patch changes common code part in regard to page table folding and adds extra checks to mm_[inc|dec]_nr_[pmds|puds]. - Add FORCE for all build targets using if_changed - Use non-loadable phdr for the .vmlinux.info section to avoid a segment overlap that confuses kexec - Cleanup the attribute definition for the diagnostic sampling - Increase stack size for CONFIG_KASAN=y builds - Export __node_distance to fix a build error - Correct return code of a PMU event init function - An update for the default configs * tag 's390-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/perf: Change CPUM_CF return code in event init function s390: update defconfigs s390/mm: Fix ERROR: "__node_distance" undefined! s390/kasan: increase instrumented stack size to 64k s390/cpum_sf: Rework attribute definition for diagnostic sampling s390/mm: fix mis-accounting of pgtable_bytes mm: add mm_pxd_folded checks to pgtable_bytes accounting functions mm: introduce mm_[p4d|pud|pmd]_folded mm: make the __PAGETABLE_PxD_FOLDED defines non-empty s390: avoid vmlinux segments overlap s390/vdso: add missing FORCE to build targets s390/decompressor: add missing FORCE to build targets
2018-11-08s390/perf: Change CPUM_CF return code in event init functionThomas Richter1-1/+1
The function perf_init_event() creates a new event and assignes it to a PMU. This a done in a loop over all existing PMUs. For each listed PMU the event init function is called and if this function does return any other error than -ENOENT, the loop is terminated the creation of the event fails. If the event is invalid, return -ENOENT to try other PMUs. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-05compiler: remove __no_sanitize_address_or_inline againMartin Schwidefsky1-2/+2
The __no_sanitize_address_or_inline and __no_kasan_or_inline defines are almost identical. The only difference is that __no_kasan_or_inline does not have the 'notrace' attribute. To be able to replace __no_sanitize_address_or_inline with the older definition, add 'notrace' to __no_kasan_or_inline and change to two users of __no_sanitize_address_or_inline in the s390 code. The 'notrace' option is necessary for e.g. the __load_psw_mask function in arch/s390/include/asm/processor.h. Without the option it is possible to trace __load_psw_mask which leads to kernel stack overflow. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Pointed-out-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-05s390: update defconfigsHeiko Carstens3-43/+63
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-02s390/mm: Fix ERROR: "__node_distance" undefined!Justin M. Forbes1-0/+1
Fixes: ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 make: *** [Makefile:1275: modules] Error 2 + exit 1 Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-02s390/kasan: increase instrumented stack size to 64kVasily Gorbik3-5/+5
Increase kasan instrumented kernel stack size from 32k to 64k. Other architectures seems to get away with just doubling kernel stack size under kasan, but on s390 this appears to be not enough due to bigger frame size. The particular pain point is kasan inlined checks (CONFIG_KASAN_INLINE vs CONFIG_KASAN_OUTLINE). With inlined checks one particular case hitting stack overflow is fs sync on xfs filesystem: #0 [9a0681e8] 704 bytes check_usage at 34b1fc #1 [9a0684a8] 432 bytes check_usage at 34c710 #2 [9a068658] 1048 bytes validate_chain at 35044a #3 [9a068a70] 312 bytes __lock_acquire at 3559fe #4 [9a068ba8] 440 bytes lock_acquire at 3576ee #5 [9a068d60] 104 bytes _raw_spin_lock at 21b44e0 #6 [9a068dc8] 1992 bytes enqueue_entity at 2dbf72 #7 [9a069590] 1496 bytes enqueue_task_fair at 2df5f0 #8 [9a069b68] 64 bytes ttwu_do_activate at 28f438 #9 [9a069ba8] 552 bytes try_to_wake_up at 298c4c #10 [9a069dd0] 168 bytes wake_up_worker at 23f97c #11 [9a069e78] 200 bytes insert_work at 23fc2e #12 [9a069f40] 648 bytes __queue_work at 2487c0 #13 [9a06a1c8] 200 bytes __queue_delayed_work at 24db28 #14 [9a06a290] 248 bytes mod_delayed_work_on at 24de84 #15 [9a06a388] 24 bytes kblockd_mod_delayed_work_on at 153e2a0 #16 [9a06a3a0] 288 bytes __blk_mq_delay_run_hw_queue at 158168c #17 [9a06a4c0] 192 bytes blk_mq_run_hw_queue at 1581a3c #18 [9a06a580] 184 bytes blk_mq_sched_insert_requests at 15a2192 #19 [9a06a638] 1024 bytes blk_mq_flush_plug_list at 1590f3a #20 [9a06aa38] 704 bytes blk_flush_plug_list at 1555028 #21 [9a06acf8] 320 bytes schedule at 219e476 #22 [9a06ae38] 760 bytes schedule_timeout at 21b0aac #23 [9a06b130] 408 bytes wait_for_common at 21a1706 #24 [9a06b2c8] 360 bytes xfs_buf_iowait at fa1540 #25 [9a06b430] 256 bytes __xfs_buf_submit at fadae6 #26 [9a06b530] 264 bytes xfs_buf_read_map at fae3f6 #27 [9a06b638] 656 bytes xfs_trans_read_buf_map at 10ac9a8 #28 [9a06b8c8] 304 bytes xfs_btree_kill_root at e72426 #29 [9a06b9f8] 288 bytes xfs_btree_lookup_get_block at e7bc5e #30 [9a06bb18] 624 bytes xfs_btree_lookup at e7e1a6 #31 [9a06bd88] 2664 bytes xfs_alloc_ag_vextent_near at dfa070 #32 [9a06c7f0] 144 bytes xfs_alloc_ag_vextent at dff3ca #33 [9a06c880] 1128 bytes xfs_alloc_vextent at e05fce #34 [9a06cce8] 584 bytes xfs_bmap_btalloc at e58342 #35 [9a06cf30] 1336 bytes xfs_bmapi_write at e618de #36 [9a06d468] 776 bytes xfs_iomap_write_allocate at ff678e #37 [9a06d770] 720 bytes xfs_map_blocks at f82af8 #38 [9a06da40] 928 bytes xfs_writepage_map at f83cd6 #39 [9a06dde0] 320 bytes xfs_do_writepage at f85872 #40 [9a06df20] 1320 bytes write_cache_pages at 73dfe8 #41 [9a06e448] 208 bytes xfs_vm_writepages at f7f892 #42 [9a06e518] 88 bytes do_writepages at 73fe6a #43 [9a06e570] 872 bytes __writeback_single_inode at a20cb6 #44 [9a06e8d8] 664 bytes writeback_sb_inodes at a23be2 #45 [9a06eb70] 296 bytes __writeback_inodes_wb at a242e0 #46 [9a06ec98] 928 bytes wb_writeback at a2500e #47 [9a06f038] 848 bytes wb_do_writeback at a260ae #48 [9a06f388] 536 bytes wb_workfn at a28228 #49 [9a06f5a0] 1088 bytes process_one_work at 24a234 #50 [9a06f9e0] 1120 bytes worker_thread at 24ba26 #51 [9a06fe40] 104 bytes kthread at 26545a #52 [9a06fea8] kernel_thread_starter at 21b6b62 To be able to increase the stack size to 64k reuse LLILL instruction in __switch_to function to load 64k - STACK_FRAME_OVERHEAD - __PT_SIZE (65192) value as unsigned. Reported-by: Benjamin Block <bblock@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-02s390/cpum_sf: Rework attribute definition for diagnostic samplingThomas Richter1-5/+28
Previously, the attribute entry for diagnostic sampling was added if authorized. Otherwise, the array of struct attribute contains two NULL values. Change this logic and reserve space for the attribute for diagnostic sampling. If diagnostic sampling is authorized, add an entry in the respective position in the array of struct attribute. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Suggested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-02s390/mm: fix mis-accounting of pgtable_bytesMartin Schwidefsky5-11/+25
In case a fork or a clone system fails in copy_process and the error handling does the mmput() at the bad_fork_cleanup_mm label, the following warning messages will appear on the console: BUG: non-zero pgtables_bytes on freeing mm: 16384 The reason for that is the tricks we play with mm_inc_nr_puds() and mm_inc_nr_pmds() in init_new_context(). A normal 64-bit process has 3 levels of page table, the p4d level and the pud level are folded. On process termination the free_pud_range() function in mm/memory.c will subtract 16KB from pgtable_bytes with a mm_dec_nr_puds() call, but there actually is not really a pud table. One issue with this is the fact that pgtable_bytes is usually off by a few kilobytes, but the more severe problem is that for a failed fork or clone the free_pgtables() function is not called. In this case there is no mm_dec_nr_puds() or mm_dec_nr_pmds() that go together with the mm_inc_nr_puds() and mm_inc_nr_pmds in init_new_context(). The pgtable_bytes will be off by 16384 or 32768 bytes and we get the BUG message. The message itself is purely cosmetic, but annoying. To fix this override the mm_pmd_folded, mm_pud_folded and mm_p4d_folded function to check for the true size of the address space. Reported-by: Li Wang <liwang@redhat.com> Tested-by: Li Wang <liwang@redhat.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-31mm: remove include/linux/bootmem.hMike Rapoport11-15/+8
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: rename free_all_bootmem to memblock_free_allMike Rapoport1-1/+1
The conversion is done using sed -i 's@free_all_bootmem@memblock_free_all@' \ $(git grep -l free_all_bootmem) Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: remove _virt from APIs returning virtual addressMike Rapoport5-9/+9
The conversion is done using sed -i 's@memblock_virt_alloc@memblock_alloc@g' \ $(git grep -l memblock_virt_alloc) Link: http://lkml.kernel.org/r/1536927045-23536-8-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31memblock: rename memblock_alloc{_nid,_try_nid} to memblock_phys_alloc*Mike Rapoport4-5/+6
Make it explicit that the caller gets a physical address rather than a virtual one. This will also allow using meblock_alloc prefix for memblock allocations returning virtual address, which is done in the following patches. The conversion is done using the following semantic patch: @@ expression e1, e2, e3; @@ ( - memblock_alloc(e1, e2) + memblock_phys_alloc(e1, e2) | - memblock_alloc_nid(e1, e2, e3) + memblock_phys_alloc_nid(e1, e2, e3) | - memblock_alloc_try_nid(e1, e2, e3) + memblock_phys_alloc_try_nid(e1, e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-7-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove CONFIG_HAVE_MEMBLOCKMike Rapoport1-1/+0
All architecures use memblock for early memory management. There is no need for the CONFIG_HAVE_MEMBLOCK configuration option. [rppt@linux.vnet.ibm.com: of/fdt: fixup #ifdefs] Link: http://lkml.kernel.org/r/20180919103457.GA20545@rapoport-lnx [rppt@linux.vnet.ibm.com: csky: fixups after bootmem removal] Link: http://lkml.kernel.org/r/20180926112744.GC4628@rapoport-lnx [rppt@linux.vnet.ibm.com: remove stale #else and the code it protects] Link: http://lkml.kernel.org/r/1538067825-24835-1-git-send-email-rppt@linux.vnet.ibm.com Link: http://lkml.kernel.org/r/1536927045-23536-4-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Tested-by: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31mm: remove CONFIG_NO_BOOTMEMMike Rapoport1-1/+0
All achitectures select NO_BOOTMEM which essentially becomes 'Y' for any kernel configuration and therefore it can be removed. [alexander.h.duyck@linux.intel.com: remove now defunct NO_BOOTMEM from depends list for deferred init] Link: http://lkml.kernel.org/r/20180925201814.3576.15105.stgit@localhost.localdomain Link: http://lkml.kernel.org/r/1536927045-23536-3-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-31treewide: remove current_text_addrNick Desaulniers1-6/+0
Prefer _THIS_IP_ defined in linux/kernel.h. Most definitions of current_text_addr were the same as _THIS_IP_, but a few archs had inline assembly instead. This patch removes the final call site of current_text_addr, making all of the definitions dead code. [akpm@linux-foundation.org: fix arch/csky/include/asm/processor.h] Link: http://lkml.kernel.org/r/20180911182413.180715-1-ndesaulniers@google.com Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26sched: loadavg: consolidate LOAD_INT, LOAD_FRAC, CALC_LOADJohannes Weiner1-4/+0
There are several definitions of those functions/macros in places that mess with fixed-point load averages. Provide an official version. [akpm@linux-foundation.org: fix missed conversion in block/blk-iolatency.c] Link: http://lkml.kernel.org/r/20180828172258.3185-5-hannes@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Suren Baghdasaryan <surenb@google.com> Tested-by: Daniel Drake <drake@endlessm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Johannes Weiner <jweiner@fb.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Enderborg <peter.enderborg@sony.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Shakeel Butt <shakeelb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vinayak Menon <vinmenon@codeaurora.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-26s390: avoid vmlinux segments overlapVasily Gorbik2-3/+3
Currently .vmlinux.info section of uncompressed vmlinux elf image is included into the data segment and load address specified as 0. That extends data segment to address 0 and makes "text" and "data" segments overlap. Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000001000 0x0000000000100000 0x0000000000100000 0x0000000000ead03c 0x0000000000ead03c R E 0x1000 LOAD 0x0000000000eaf000 0x0000000000000000 0x0000000000000000 0x0000000001a13400 0x000000000233b520 RWE 0x1000 NOTE 0x0000000000eae000 0x0000000000fad000 0x0000000000fad000 0x000000000000003c 0x000000000000003c 0x4 Section to Segment mapping: Segment Sections... 00 .text .notes 01 .rodata __ksymtab __ksymtab_gpl __ksymtab_strings __param __modver .data..ro_after_init __ex_table .data __bug_table .init.text .exit.text .exit.data .altinstructions .altinstr_replacement .nospec_call_table .nospec_return_table .boot.data .init.data .data..percpu .bss .vmlinux.info 02 .notes Later when vmlinux.bin is produced from vmlinux, .vmlinux.info section is removed. But elf vmlinux file, even though it is not bootable anymore, used for debugging and loadable segments overlap should be avoided. Utilize special ":NONE" phdr specification to avoid adding .vmlinux.info into loadable data segment. Also set .vmlinux.info section type to INFO, which allows to get a not-loadable info CONTENTS section. Since minimal supported version of binutils 2.20 does not have --dump-section objcopy option, make .vmlinux.info section loadable during info.bin creation to get actual section contents. Reported-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-26s390/vdso: add missing FORCE to build targetsVasily Gorbik2-6/+6
According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vdso targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-26s390/decompressor: add missing FORCE to build targetsVasily Gorbik1-7/+7
According to Documentation/kbuild/makefiles.txt all build targets using if_changed should use FORCE as well. Add missing FORCE to make sure vmlinux decompressor targets are rebuild properly when not just immediate prerequisites have changed but also when build command differs. Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-25Merge tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds8-63/+372
Pull KVM updates from Radim Krčmář: "ARM: - Improved guest IPA space support (32 to 52 bits) - RAS event delivery for 32bit - PMU fixes - Guest entry hardening - Various cleanups - Port of dirty_log_test selftest PPC: - Nested HV KVM support for radix guests on POWER9. The performance is much better than with PR KVM. Migration and arbitrary level of nesting is supported. - Disable nested HV-KVM on early POWER9 chips that need a particular hardware bug workaround - One VM per core mode to prevent potential data leaks - PCI pass-through optimization - merge ppc-kvm topic branch and kvm-ppc-fixes to get a better base s390: - Initial version of AP crypto virtualization via vfio-mdev - Improvement for vfio-ap - Set the host program identifier - Optimize page table locking x86: - Enable nested virtualization by default - Implement Hyper-V IPI hypercalls - Improve #PF and #DB handling - Allow guests to use Enlightened VMCS - Add migration selftests for VMCS and Enlightened VMCS - Allow coalesced PIO accesses - Add an option to perform nested VMCS host state consistency check through hardware - Automatic tuning of lapic_timer_advance_ns - Many fixes, minor improvements, and cleanups" * tag 'kvm-4.20-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) KVM/nVMX: Do not validate that posted_intr_desc_addr is page aligned Revert "kvm: x86: optimize dr6 restore" KVM: PPC: Optimize clearing TCEs for sparse tables x86/kvm/nVMX: tweak shadow fields selftests/kvm: add missing executables to .gitignore KVM: arm64: Safety check PSTATE when entering guest and handle IL KVM: PPC: Book3S HV: Don't use streamlined entry path on early POWER9 chips arm/arm64: KVM: Enable 32 bits kvm vcpu events support arm/arm64: KVM: Rename function kvm_arch_dev_ioctl_check_extension() KVM: arm64: Fix caching of host MDCR_EL2 value KVM: VMX: enable nested virtualization by default KVM/x86: Use 32bit xor to clear registers in svm.c kvm: x86: Introduce KVM_CAP_EXCEPTION_PAYLOAD kvm: vmx: Defer setting of DR6 until #DB delivery kvm: x86: Defer setting of CR2 until #PF delivery kvm: x86: Add payload operands to kvm_multiple_exception kvm: x86: Add exception payload fields to kvm_vcpu_events kvm: x86: Add has_payload and payload to kvm_queued_exception KVM: Documentation: Fix omission in struct kvm_vcpu_events KVM: selftests: add Enlightened VMCS test ...
2018-10-25Merge branch 'linus' of ↵Linus Torvalds4-27/+24
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove VLA usage - Add cryptostat user-space interface - Add notifier for new crypto algorithms Algorithms: - Add OFB mode - Remove speck Drivers: - Remove x86/sha*-mb as they are buggy - Remove pcbc(aes) from x86/aesni - Improve performance of arm/ghash-ce by up to 85% - Implement CTS-CBC in arm64/aes-blk, faster by up to 50% - Remove PMULL based arm64/crc32 driver - Use PMULL in arm64/crct10dif - Add aes-ctr support in s5p-sss - Add caam/qi2 driver Others: - Pick better transform if one becomes available in crc-t10dif" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (124 commits) crypto: chelsio - Update ntx queue received from cxgb4 crypto: ccree - avoid implicit enum conversion crypto: caam - add SPDX license identifier to all files crypto: caam/qi - simplify CGR allocation, freeing crypto: mxs-dcp - make symbols 'sha1_null_hash' and 'sha256_null_hash' static crypto: arm64/aes-blk - ensure XTS mask is always loaded crypto: testmgr - fix sizeof() on COMP_BUF_SIZE crypto: chtls - remove set but not used variable 'csk' crypto: axis - fix platform_no_drv_owner.cocci warnings crypto: x86/aes-ni - fix build error following fpu template removal crypto: arm64/aes - fix handling sub-block CTS-CBC inputs crypto: caam/qi2 - avoid double export crypto: mxs-dcp - Fix AES issues crypto: mxs-dcp - Fix SHA null hashes and output length crypto: mxs-dcp - Implement sha import/export crypto: aegis/generic - fix for big endian systems crypto: morus/generic - fix for big endian systems crypto: lrw - fix rebase error after out of bounds fix crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X. crypto: cavium/nitrox - NITROX command queue changes. ...
2018-10-25Merge branch 'timers-core-for-linus' of ↵Linus Torvalds2-17/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timekeeping updates from Thomas Gleixner: "The timers and timekeeping departement provides: - Another large y2038 update with further preparations for providing the y2038 safe timespecs closer to the syscalls. - An overhaul of the SHCMT clocksource driver - SPDX license identifier updates - Small cleanups and fixes all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits) tick/sched : Remove redundant cpu_online() check clocksource/drivers/dw_apb: Add reset control clocksource: Remove obsolete CLOCKSOURCE_OF_DECLARE clocksource/drivers: Unify the names to timer-* format clocksource/drivers/sh_cmt: Add R-Car gen3 support dt-bindings: timer: renesas: cmt: document R-Car gen3 support clocksource/drivers/sh_cmt: Properly line-wrap sh_cmt_of_table[] initializer clocksource/drivers/sh_cmt: Fix clocksource width for 32-bit machines clocksource/drivers/sh_cmt: Fixup for 64-bit machines clocksource/drivers/sh_tmu: Convert to SPDX identifiers clocksource/drivers/sh_mtu2: Convert to SPDX identifiers clocksource/drivers/sh_cmt: Convert to SPDX identifiers clocksource/drivers/renesas-ostm: Convert to SPDX identifiers clocksource: Convert to using %pOFn instead of device_node.name tick/broadcast: Remove redundant check RISC-V: Request newstat syscalls y2038: signal: Change rt_sigtimedwait to use __kernel_timespec y2038: socket: Change recvmmsg to use __kernel_timespec y2038: sched: Change sched_rr_get_interval to use __kernel_timespec y2038: utimes: Rework #ifdef guards for compat syscalls ...
2018-10-24Merge branch 'siginfo-linus' of ↵Linus Torvalds2-17/+1
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull siginfo updates from Eric Biederman: "I have been slowly sorting out siginfo and this is the culmination of that work. The primary result is in several ways the signal infrastructure has been made less error prone. The code has been updated so that manually specifying SEND_SIG_FORCED is never necessary. The conversion to the new siginfo sending functions is now complete, which makes it difficult to send a signal without filling in the proper siginfo fields. At the tail end of the patchset comes the optimization of decreasing the size of struct siginfo in the kernel from 128 bytes to about 48 bytes on 64bit. The fundamental observation that enables this is by definition none of the known ways to use struct siginfo uses the extra bytes. This comes at the cost of a small user space observable difference. For the rare case of siginfo being injected into the kernel only what can be copied into kernel_siginfo is delivered to the destination, the rest of the bytes are set to 0. For cases where the signal and the si_code are known this is safe, because we know those bytes are not used. For cases where the signal and si_code combination is unknown the bits that won't fit into struct kernel_siginfo are tested to verify they are zero, and the send fails if they are not. I made an extensive search through userspace code and I could not find anything that would break because of the above change. If it turns out I did break something it will take just the revert of a single change to restore kernel_siginfo to the same size as userspace siginfo. Testing did reveal dependencies on preferring the signo passed to sigqueueinfo over si->signo, so bit the bullet and added the complexity necessary to handle that case. Testing also revealed bad things can happen if a negative signal number is passed into the system calls. Something no sane application will do but something a malicious program or a fuzzer might do. So I have fixed the code that performs the bounds checks to ensure negative signal numbers are handled" * 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (80 commits) signal: Guard against negative signal numbers in copy_siginfo_from_user32 signal: Guard against negative signal numbers in copy_siginfo_from_user signal: In sigqueueinfo prefer sig not si_signo signal: Use a smaller struct siginfo in the kernel signal: Distinguish between kernel_siginfo and siginfo signal: Introduce copy_siginfo_from_user and use it's return value signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZE signal: Fail sigqueueinfo if si_signo != sig signal/sparc: Move EMT_TAGOVF into the generic siginfo.h signal/unicore32: Use force_sig_fault where appropriate signal/unicore32: Generate siginfo in ucs32_notify_die signal/unicore32: Use send_sig_fault where appropriate signal/arc: Use force_sig_fault where appropriate signal/arc: Push siginfo generation into unhandled_exception signal/ia64: Use force_sig_fault where appropriate signal/ia64: Use the force_sig(SIGSEGV,...) in ia64_rt_sigreturn signal/ia64: Use the generic force_sigsegv in setup_frame signal/arm/kvm: Use send_sig_mceerr signal/arm: Use send_sig_fault where appropriate signal/arm: Use force_sig_fault where appropriate ...
2018-10-23Merge branch 'locking-core-for-linus' of ↵Linus Torvalds4-29/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking and misc x86 updates from Ingo Molnar: "Lots of changes in this cycle - in part because locking/core attracted a number of related x86 low level work which was easier to handle in a single tree: - Linux Kernel Memory Consistency Model updates (Alan Stern, Paul E. McKenney, Andrea Parri) - lockdep scalability improvements and micro-optimizations (Waiman Long) - rwsem improvements (Waiman Long) - spinlock micro-optimization (Matthew Wilcox) - qspinlocks: Provide a liveness guarantee (more fairness) on x86. (Peter Zijlstra) - Add support for relative references in jump tables on arm64, x86 and s390 to optimize jump labels (Ard Biesheuvel, Heiko Carstens) - Be a lot less permissive on weird (kernel address) uaccess faults on x86: BUG() when uaccess helpers fault on kernel addresses (Jann Horn) - macrofy x86 asm statements to un-confuse the GCC inliner. (Nadav Amit) - ... and a handful of other smaller changes as well" * 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) locking/lockdep: Make global debug_locks* variables read-mostly locking/lockdep: Fix debug_locks off performance problem locking/pvqspinlock: Extend node size when pvqspinlock is configured locking/qspinlock_stat: Count instances of nested lock slowpaths locking/qspinlock, x86: Provide liveness guarantee x86/asm: 'Simplify' GEN_*_RMWcc() macros locking/qspinlock: Rework some comments locking/qspinlock: Re-order code locking/lockdep: Remove duplicated 'lock_class_ops' percpu array x86/defconfig: Enable CONFIG_USB_XHCI_HCD=y futex: Replace spin_is_locked() with lockdep locking/lockdep: Make class->ops a percpu counter and move it under CONFIG_DEBUG_LOCKDEP=y x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs x86/extable: Macrofy inline assembly code to work around GCC inlining bugs x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs x86/refcount: Work around GCC inlining bug x86/objtool: Use asm macros to work around GCC inlining bugs ...
2018-10-23Merge tag 's390-4.20-1' of ↵Linus Torvalds84-739/+2131
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - Improved access control for the zcrypt driver, multiple device nodes can now be created with different access control lists - Extend the pkey API to provide random protected keys, this is useful for encrypted swap device with ephemeral protected keys - Add support for virtually mapped kernel stacks - Rework the early boot code, this moves the memory detection into the boot code that runs prior to decompression. - Add KASAN support - Bug fixes and cleanups * tag 's390-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits) s390/pkey: move pckmo subfunction available checks away from module init s390/kasan: support preemptible kernel build s390/pkey: Load pkey kernel module automatically s390/perf: Return error when debug_register fails s390/sthyi: Fix machine name validity indication s390/zcrypt: fix broken zcrypt_send_cprb in-kernel api function s390/vmalloc: fix VMALLOC_START calculation s390/mem_detect: add missing include s390/dumpstack: print psw mask and address again s390/crypto: Enhance paes cipher to accept variable length key material s390/pkey: Introduce new API for transforming key blobs s390/pkey: Introduce new API for random protected key verification s390/pkey: Add sysfs attributes to emit secure key blobs s390/pkey: Add sysfs attributes to emit protected key blobs s390/pkey: Define protected key blob format s390/pkey: Introduce new API for random protected key generation s390/zcrypt: add ap_adapter_mask sysfs attribute s390/zcrypt: provide apfs failure code on type 86 error reply s390/zcrypt: zcrypt device driver cleanup s390/kasan: add support for mem= kernel parameter ...
2018-10-22s390/kasan: support preemptible kernel buildVasily Gorbik2-4/+9
When the kernel is built with: CONFIG_PREEMPT=y CONFIG_PREEMPT_COUNT=y "stfle" function used by kasan initialization code makes additional call to preempt_count_add/preempt_count_sub. To avoid removing kasan instrumentation from sched code where those functions leave split stfle function and provide __stfle variant without preemption handling to be used by Kasan. Reported-by: Benjamin Block <bblock@linux.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-19s390/perf: Return error when debug_register failsThomas Richter1-1/+5
Return an error when the function debug_register() fails allocating the debug handle. Also remove the registered debug handle when the initialization fails later on. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-15s390/sthyi: Fix machine name validity indicationJanosch Frank1-3/+5
When running as a level 3 guest with no host provided sthyi support sclp_ocf_cpc_name_copy() will only return zeroes. Zeroes are not a valid group name, so let's not indicate that the group name field is valid. Also the group name is not dependent on stsi, let's not return based on stsi before setting it. Fixes: 95ca2cb57985 ("KVM: s390: Add sthyi emulation") Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-13Merge tag 'kvm-s390-next-4.20-2' of ↵Paolo Bonzini2-4/+55
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390/vfio-ap: Fixes and enhancements for vfio-ap - add tracing - fix a locking bug - make local functions and data static
2018-10-11s390/vmalloc: fix VMALLOC_START calculationMikhail Zaslonko1-2/+2
With the introduction of the module area on top of the vmalloc area, the calculation of VMALLOC_START in setup_memory_end() function hasn't been adjusted. As a result we got vmalloc area 2 Gb (MODULES_LEN) smaller than it should be and the preceding vmemmap area got extra memory instead. The patch fixes this calculation error although there were no visible negative effects. Apart from that, change 'tmp' variable to 'vmemmap' in memory_end calculation for better readability. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10Merge tag 's390-4.19-4' of ↵Greg Kroah-Hartman3-7/+6
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Martin writes: "s390 fixes for 4.19-rc8 Four more patches for 4.19: - Fix resume after suspend-to-disk if resume-CPU != suspend-CPU - Fix vfio-ccw check for pinned pages - Two patches to avoid a usercopy-whitelist warning in vfio-ccw" * tag 's390-4.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: Fix how vfio-ccw checks pinned pages s390/cio: Refactor alloc of ccw_io_region s390/cio: Convert ccw_io_region to pointer s390/hibernate: fix error handling when suspend cpu != resume cpu
2018-10-10s390/mem_detect: add missing includeHeiko Carstens1-0/+1
Fix this allnoconfig build breakage: arch/s390/boot/mem_detect.c: In function 'tprot': arch/s390/boot/mem_detect.c:122:12: error: 'EFAULT' undeclared (first use in this function) Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10s390/dumpstack: print psw mask and address againHeiko Carstens1-1/+1
With pointer obfuscation the output of show_registers() became quite useless: Krnl PSW : (____ptrval____) (____ptrval____) (__list_add_valid+0x98/0xa8) In order to print the psw mask and address use %px instead of %p. And the output looks again like this: Krnl PSW : 0404d00180000000 00000000007c0dd0 (__list_add_valid+0x98/0xa8) Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10s390/crypto: Enhance paes cipher to accept variable length key materialIngo Franzki1-26/+37
Enhance the paes_s390 kernel module to allow the paes cipher to accept variable length key material. The key material accepted by the paes cipher is a key blob of various types. As of today, two key blob types are supported: CCA secure key blobs and protected key blobs. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10s390/pkey: Introduce new API for transforming key blobsIngo Franzki2-0/+25
Introduce a new ioctl API and in-kernel API to transform a variable length key blob of any supported type into a protected key. Transforming a secure key blob uses the already existing function pkey_sec2protk(). Transforming a protected key blob also verifies if the protected key is still valid. If not, -ENODEV is returned. Both APIs are described in detail in the header files arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-10s390/pkey: Introduce new API for random protected key verificationIngo Franzki2-0/+17
Introduce a new ioctl API and in-kernel API to verify if a random protected key is still valid. A protected key is invalid when its wrapping key verification pattern does not match the verification pattern of the LPAR. Each time an LPAR is activated, a new LPAR wrapping key is generated and the wrapping key verification pattern is updated. Both APIs are described in detail in the header files arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/pkey: Introduce new API for random protected key generationIngo Franzki2-0/+18
This patch introduces a new ioctl API and in-kernel API to generate a random protected key. The protected key is generated in a way that the effective clear key is never exposed in clear. Both APIs are described in detail in the header files arch/s390/include/asm/pkey.h and arch/s390/include/uapi/asm/pkey.h. Signed-off-by: Ingo Franzki <ifranzki@linux.ibm.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/zcrypt: zcrypt device driver cleanupHarald Freudenberger1-2/+2
Some cleanup in the s390 zcrypt device driver: - Removed fragments of pcixx crypto card code. This code can't be reached anymore because the hardware detection function does not recognize crypto cards < CEX2 since commit f56545430736 ("s390/zcrypt: Introduce QACT support for AP bus devices.") - Rename of some files and driver names which where still reflecting pcixx support to cex2a/cex2c. - Removed all the zcrypt version strings in the file headers. There is only one place left - the zcrypt.h header file is now the only place for zcrypt device driver version info. - Zcrypt version pump up from 2.2.0 to 2.2.1. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: add support for mem= kernel parameterVasily Gorbik1-0/+3
Handle mem= kernel parameter in kasan to limit physical memory. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: optimize kasan vmemmap allocationVasily Gorbik1-1/+2
Kasan implementation now supports memory hotplug operations. For that reason regions of initially standby memory are now skipped from shadow mapping and are mapped/unmapped dynamically upon bringing memory online/offline. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: avoid kasan crash with standby memory definedVasily Gorbik1-1/+18
Kasan early memory allocator simply chops off memory blocks from the end of the physical memory. Reuse mem_detect info to identify actual online memory end rather than using max_physmem_end. This allows to run the kernel with kasan enabled and standby memory defined. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/head: avoid doubling early boot stack size under KASANVasily Gorbik2-1/+2
Early boot stack uses predefined 4 pages of memory 0x8000-0xC000. This stack is used to run not instumented decompressor/facilities verification C code. It doesn't make sense to double its size when the kernel is built with KASAN support. BOOT_STACK_ORDER is introduced to avoid that. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/mm: improve debugfs ptdump markers walkingVasily Gorbik1-1/+1
This allows to print multiple markers when they happened to have the same value. ... 0x001bfffff0100000-0x001c000000000000 255M PMD I ---[ Kasan Shadow End ]--- ---[ vmemmap Area ]--- 0x001c000000000000-0x001c000002000000 32M PMD RW X ... Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/mm: optimize debugfs ptdump kasan zero page walkingVasily Gorbik1-1/+34
Kasan zero p4d/pud/pmd/pte are always filled in with corresponding kasan zero entries. Walking kasan zero page backed area is time consuming and unnecessary. When kasan zero p4d/pud/pmd is encountered, it eventually points to the kasan zero page always with the same attributes and nothing but it, therefore zero p4d/pud/pmd could be jumped over. Also adds a space between address range and pages number to separate them from each other when pages number is huge. 0x0018000000000000-0x0018000010000000 256M PMD RW X 0x0018000010000000-0x001bfffff0000000 1073741312M PTE RO X 0x001bfffff0000000-0x001bfffff0001000 4K PTE RW X Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: add option for 4-level paging supportVasily Gorbik4-7/+26
By default 3-level paging is used when the kernel is compiled with kasan support. Add 4-level paging option to support systems with more then 3TB of physical memory and to cover 4-level paging specific code with kasan as well. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: free early identity mapping structuresVasily Gorbik3-2/+13
Kasan initialization code is changed to populate persistent shadow first, save allocator position into pgalloc_freeable and proceed with early identity mapping creation. This way early identity mapping paging structures could be freed at once after switching to swapper_pg_dir when early identity mapping is not needed anymore. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: enable stack and global variables access checksVasily Gorbik2-1/+6
By defining KASAN_SHADOW_OFFSET in Kconfig stack and global variables memory access check instrumentation is enabled. gcc version 4.9.2 or newer is also required. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/dumpstack: disable __dump_trace kasan instrumentationVasily Gorbik1-1/+1
Walking async_stack produces false positives. Disable __dump_trace function instrumentation for now. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/kasan: reipl and kexec supportVasily Gorbik4-3/+8
Some functions from both arch/s390/kernel/ipl.c and arch/s390/kernel/machine_kexec.c are called without DAT enabled (or with and without DAT enabled code paths). There is no easy way to partially disable kasan for those files without a substantial rework. Disable kasan for both files for now. To avoid disabling kasan for arch/s390/kernel/diag.c DAT flag is enabled in diag308 call. pcpu_delegate which disables DAT is marked with __no_sanitize_address to disable instrumentation for that one function. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-10-09s390/smp: kasan stack instrumentation supportVasily Gorbik2-4/+4
smp_start_secondary function is called without DAT enabled. To avoid disabling kasan instrumentation for entire arch/s390/kernel/smp.c smp_start_secondary has been split in 2 parts. smp_start_secondary has instrumentation disabled, it does minimal setup and enables DAT. Then instrumentated __smp_start_secondary is called to do the rest. __load_psw_mask function instrumentation has been disabled as well to be able to call it from smp_start_secondary. Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 18:46:52 +0000