| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If configured for z13 assume the kernel makes use of the instructions
that are part of the load-and-zero-rightmost-byte facility and
load/store-on-condition facility 2.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
test_facility() can be optimized for bits which must be set anyway,
due to the check in head.S. This removes a couple of superfluous
runtime checks.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The facility lists contain a lot of bits which are not necessary to
run the kernel. Therefore remove them and keep only those bits which
are required for the kernel.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Change head.S to make use of the generated facility list.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Modifying the architecture level set facility lists was always very
error prone. Given the numbering of the facility bits within the
Principles of Operation, where the most significant bit number is 0,
it happened a lot of times that wrong bits were set or cleared.
Therefore this patch adds a tool "gen_facilities" which generates
include/generated/facilites.h. The definition of the bits to be set
is contained within arch/s390/include/asm/facilities_src.h and can be
easily extended to e.g. also generate such lists for the KVM module.
The generated file looks like this:
#define FACILITIES_ALS _AC(0xc1006450f0040000,UL)
#define FACILITIES_ALS_DWORDS 1
The facility bits defined in this patch match 1:1 to the current masks
that can be found in head.S.
That is if the tool gets executed with -march=z990 then the generated
masks will equal the masks in head.S for CONFIG_MARCH_Z990.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
head.s contains an stfle instruction which stores it result at the
storage location that is assigned to the stfl instruction.
This is currently no problem, since we only care about one double
word. However if the number of double words in the ALS bitfield grows
the current code is not very stable.
E.g. before issuing the stfle command the memory to which it stores
must be cleared, since the instruction may or may not clear memory
contents where no bits are set.
In order to simplify the code a bit always use the storage location
that we reserved for the stfle result.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Now that 31 bit support is gone, the assembler always knows about the
stfl instruction. Therefore lets use a readable mnemonic. Also remove
the not needed extable entry for the inline assembly and fix the
output constraint.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The print_insn() function returns strings like "lghi %r1,0". To escape the
'%' character in sprintf() a second '%' is used. For example "lghi %%r1,0"
is converted into "lghi %r1,0".
After print_insn() the output string is passed to printk(). Because format
specifiers like "%r" or "%f" are ignored by printk() this works by chance
most of the time. But for instructions with control registers like
"lctl %c6,%c6,780" this fails because printk() interprets "%c" as
character format specifier.
Fix this problem and escape the '%' characters twice.
For example "lctl %%%%c6,%%%%c6,780" is then converted by sprintf()
into "lctl %%c6,%%c6,780" and by printk() into "lctl %c6,%c6,780".
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Verify that the guest maximum storage address is below the MHA (maximum
host address) value allowed on the host.
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
[adopt to match recent limit,size changes]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
While the userspace interface requests the maximum size the gmap code
expects to get a maximum address.
This error resulted in bigger page tables than necessary for some guest
sizes, e.g. a 2GB guest used 3 levels instead of 2.
At the same time we introduce KVM_S390_NO_MEM_LIMIT, which allows in a
bright future that a guest spans the complete 64 bit address space.
We also switch to TASK_MAX_SIZE for the initial memory size, this is a
cosmetic change as the previous size also resulted in a 4 level pagetable
creation.
Reported-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
The s390dbf and trace events provide a debugfs interface.
If kptr_restrict is active, we should not expose kernel
pointers. We can fence the debugfs output by using %pK
instead of %p.
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Replace two memcpy with proper assignment.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Makes it easier to handle init vs core cleanly, though the change is
fairly invasive across random architectures.
It simplifies the rbtree code immediately, however, while keeping the
core data together in the same cachline (now iff the rbtree code is
enabled).
Acked-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
With commit b92b8b35a2e ("locking/arch: Rename set_mb() to smp_store_mb()")
it was made clear that the context of this call (and thus set_mb)
is strictly for CPU ordering, as opposed to IO. As such all archs
should use the smp variant of mb(), respecting the semantics and
saving a mandatory barrier on UP.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: dave@stgolabs.net
Link: http://lkml.kernel.org/r/1445975631-17047-3-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
rc already contains -ENOMEM, no need to assign it twice.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
|
|
This evaluates always to 'true'.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
If we don't have support for virtualization (SIE), e.g. when running under
a hypervisor not supporting execution of the SIE instruction, we should
immediately abort loading the kvm module, as the SIE instruction cannot
be enabled dynamically.
Currently, the SIE instructions fails with an exception on a non-SIE
host, resulting in the guest making no progress, instead of failing hard.
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch exposes the SIE capability (aka virtualization support) via
/proc/cpuinfo -> "features" as "sie".
As we don't want to expose this hwcap via elf, let's add a second,
"internal"/non-elf capability list. The content is simply concatenated
to the existing features when printing /proc/cpuinfo.
We also add the defines to elf.h to keep the hwcap stuff at a common
place.
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch adds a way to check if the SIE with zArchitecture support is
available.
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
sca_add_vpcu is not called for ucontrol guests. We must also not
apply the sca checking for sca_can_add_vcpu as ucontrol guests
do not have to follow the sca limits.
As common code already checks that id < KVM_MAX_VCPUS all other
data structures are safe as well.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Now that we already have kvm and the VCPU id set for the VCPU, we can
convert sda_add_vcpu to look much more like sda_del_vcpu.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Let's always set and clear the sda when enabling/disabling a VCPU.
Dealing with sda being set to something else makes no sense anymore
as we enable a VCPU in the SCA now after it has been registered at
the VM.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
If something goes wrong in kvm_arch_vcpu_create, the VCPU has already
been added to the sca but will never be removed. Trying to create VCPUs
with duplicate ids (e.g. after a failed attempt) is problematic.
Also, when creating multiple VCPUs in parallel, we could theoretically
forget to set the correct SCA when the switch to ESCA happens just
before the VCPU is registered.
Let's add the VCPU to the SCA in kvm_arch_vcpu_postcreate, where we can
be sure that no duplicate VCPU with the same id is around and the VCPU
has already been registered at the VM. We also have to make sure to update
ECB at that point.
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Having no sca can never happen, even when something goes wrong when
switching to ESCA. Otherwise we would have a serious bug.
Let's remove this superfluous check.
Acked-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
If CPUSTAT_ECALL_PEND isn't set, we can't have an external call pending,
so we can directly avoid taking the lock.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch allows s390 to have more than 64 VCPUs for a guest (up to
248 for memory usage considerations), if supported by the underlaying
hardware (sclp.has_esca).
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch adds code that performs transparent switch to Extended
SCA on addition of 65th VCPU in a VM. Disposal of ESCA is added too.
The entier ESCA functionality, however, is still not enabled.
The enablement will be provided in a separate patch.
This patch also uses read/write lock protection of SCA and its subfields for
possible disposal at the BSCA-to-ESCA transition. While only Basic SCA needs such
a protection (for the swap), any SCA access is now guarded.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch updates the routines (sca_*) to provide transparent access
to and manipulation on the data for both Basic and Extended SCA in use.
The kvm.arch.sca is generalized to (void *) to handle BSCA/ESCA cases.
Also the kvm.arch.use_esca flag is provided.
The actual functionality is kept the same.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch adds new structures and updates some existing ones to
provide the base for Extended SCA functionality.
The old sca_* structures were renamed to bsca_* to keep things uniform.
The access to fields of SIGP controls were turned into bitfields instead
of hardcoded bitmasks.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch provides SCA-aware helpers to create/delete a VCPU.
This is to prepare for upcoming introduction of Extended SCA support.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch generalizes access to the SIGP controls, which is a part of SCA.
This is to prepare for upcoming introduction of Extended SCA support.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
This patch generalizes access to the IPTE controls, which is a part of SCA.
This is to prepare for upcoming introduction of Extended SCA support.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Introduce sclp.has_hvs and sclp.has_esca to provide a way for kvm to check
whether the extended-SCA and the home-virtual-SCA facilities are available.
Signed-off-by: Eugene (jno) Dvurechenski <jno@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Let's rewrite this function to better reflect how we actually handle
exit_code. By dropping out early we can save a few cycles. This
especially speeds up sie exits caused by host irqs.
Also, let's move the special -EOPNOTSUPP for intercepts to
the place where it belongs and convert it to -EREMOTE.
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Let's reuse the new common function for VPCU lookup by id.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split out the new function into a separate patch]
|
|
It does not make sense to try to relinquish the time slice with diag 0x9c
to a CPU in a state that does not allow to schedule the CPU. The scenario
where this can happen is a CPU waiting in udelay/mdelay while holding a
spin-lock.
Add a CIF bit to tag a CPU in enabled wait and use it to detect that the
yield of a CPU will not be successful and skip the diagnose call.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
is_32bit_task() used to be helpful when we still had CONFIG_32BIT.
Since that is gone, it is nowadays identical to is_compat_task().
So remove it.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
When running under qemu with the default configuration (-nographic),
there is only a VT220 SCLP console, no line-mode SCLP console. Add
VT220 support to the early SCLP console so the user has a chance to
see critical error messages during early boot.
None of the existing users of _sclp_print_early() check the return
code. Instead of trying to come up with return code semantics when
printing to multiple consoles (any or all of which may fail), we just
drop the return code entirely.
Tested on z/VM (line mode console) and LPAR (VT220 and line mode
console). Tested on qemu/KVM with VT220 console and / or line mode
console.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Since commit b006f19b055f ("lib/vsprintf.c: handle invalid format
specifiers more robustly") I get errors like
[...]
Krnl Code: 00000000004e2410: c00400000000 brcl 0,4e2410
Please remove unsupported %r in format string
[ 8.179483] ------------[ cut here ]------------
[ 8.179484] WARNING: at lib/vsprintf.c:1781
Turns out that our disassembler relied on %r not being used as format
string. Let's do the proper escaping of our decode buffers.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
DMA addresses returned from map_page() are calculated by using an iommu
bitmap plus a start_dma offset. The size of this bitmap is based on the main
memory size. If we have more than (4 TB - start_dma) main memory, the DMA
address calculation will also produce addresses > 4 TB. Such addresses
cannot be inserted in the 3-level DMA page table, instead the entries
modulo 4 TB will be overwritten.
Fix this by restricting the iommu bitmap size to (4 TB - start_dma).
Also set zdev->end_dma to the actual end address of the usable
range, instead of the theoretical maximum as reported by the hardware,
which fixes a sanity check in dma_map() and also the IOMMU API domain
geometry aperture calculation.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Let's annotate it correctly, so we directly get a warning if
we ever were to use it in atomic/preempt_disable/spinlock environment.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The spinlock implementation calls the diagnose 0x9c / 0x44 immediately
if the SIGP sense running reported the target CPU as not running.
The diagnose 0x9c is a hint to the hypervisor to schedule the target
CPU in preference to the source CPU that issued the diagnose. It can
happen that on return from the diagnose the target CPU has not been
scheduled yet, e.g. if the target logical CPU is on another physical
CPU and the hypervisor did not want to migrate the logical CPU.
Avoid the immediate repeat of the diagnose instruction, instead do
the retry loop before the next invocation of diagnose 0x9c.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Introduce save_area_alloc(), save_area_boot_cpu(), save_area_add_regs()
and save_area_add_vxrs to deal with storing the CPU state in case of a
system dump. Remove struct save_area and save_area_ext, and create a new
struct save_area as a local definition to arch/s390/kernel/crash_dump.c.
Copy each individual field from the hardware status area to the save area,
storing the minimum of required data.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
To collect the CPU registers of the crashed system allocated a single
page with memblock_alloc_base and use it as a copy buffer. Replace the
stop-and-store-status sigp with a store-status-at-address sigp in
smp_save_dump_cpus() and smp_store_status(). In both cases the target
CPU is already stopped and store-status-at-address avoids the detour
via the absolute zero page.
For kexec simplify s390_reset_system and call store_status() before
the prefix register of the boot CPU has been set to zero. Use STPX
to store the prefix register and remove dump_prefix_page.
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Replace the SAVE_AREA_BASE offset calculations in reipl.S with the
assembler constant for the location of each register status area.
Use __LC_FPREGS_SAVE_AREA instead of SAVE_AREA_BASE in the three
remaining code locations and remove the definition of SAVE_AREA_BASE.
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Replace the offsets based on the struct area_area with the offset
constants from asm-offsets.c based on the struct _lowcore.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Introduce two copy functions for the memory of the dumped system,
copy_oldmem_kernel() to copy to the virtual kernel address space
and copy_oldmem_user() to copy to user space.
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
The s390 architecture can store the CPU registers of the crashed system
after the kdump kernel has been started and this is the preferred way.
Remove the remaining code fragments that deal with storing CPU registers
while the crashed system is still active.
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
New versions of the SCSI dumper use the /dev/vmcore interface instead
of zcore mem. Remove the outdated interface.
Acked-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
