summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2014-11-28Merge tag 'armsoc-for-rc7' of ↵Linus Torvalds5-12/+20
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "Not much interesting going on fixes-wise for us this week, as it should be for an -rc7. I'm not expecting Olof to work much over Thanksgiving weekend, so I decided to take over again and push these out to you. Just four simple fixes this week: - one missing of_node_put() on armv7 based mvebu - forcing the USB host into the right mode on Chromebook (exynos5-snow) - enabling two important drivers for exynos_defconfig - fixing a noncritical bug for tegra that would cause a regression with common code patches queued for 3.19" * tag 'armsoc-for-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: irq: fix buggy usage of irq_data irq field ARM: exynos_defconfig: Enable max77802 rtc and clock drivers ARM: dts: Explicitly set dr_mode on exynos5250-snow ARM: mvebu: add missing of_node_put() call in coherency.c
2014-11-28Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds4-44/+4
Pull ARM fixes from Russell King: "Another round of relatively small ARM fixes. Thomas spotted that the strex backoff delay bit was a disable bit, so it needed to be clear for this to work. Vladimir spotted that using a restart block for the cache flush operation would return -EINTR, which userspace was not expecting. Dmitry spotted that the auxiliary control register accesses for Xscale were not correct" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8226/1: cacheflush: get rid of restarting block ARM: 8222/1: mvebu: enable strex backoff delay ARM: 8216/1: xscale: correct auxiliary register in suspend/resume
2014-11-27ARM: 8226/1: cacheflush: get rid of restarting blockVladimir Murzin2-40/+2
We cannot restart cacheflush safely if a process provides user-defined signal handler and signal is pending. In this case -EINTR is returned and it is expected that process re-invokes syscall. However, there are a few problems with that: * looks like nobody bothers checking return value from cacheflush * but if it did, we don't provide the restart address for that, so the process has to use the same range again * ...and again, what might lead to looping forever So, remove cacheflush restarting code and terminate cache flushing as early as fatal signal is pending. Cc: stable@vger.kernel.org # 3.12+ Reported-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-27ARM: 8222/1: mvebu: enable strex backoff delayThomas Petazzoni1-2/+0
Under extremely rare conditions, in an MPCore node consisting of at least 3 CPUs, two CPUs trying to perform a STREX to data on the same shared cache line can enter a livelock situation. This patch enables the HW mechanism that overcomes the bug. This fixes the incorrect setup of the STREX backoff delay bit due to a wrong description in the specification. Note that enabling the STREX backoff delay mechanism is done by leaving the bit *cleared*, while the bit was currently being set by the proc-v7.S code. [Thomas: adapt to latest mainline, slightly reword the commit log, add stable markers.] Fixes: de4901933f6d ("arm: mm: Add support for PJ4B cpu and init routines") Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-27Merge tag 'mvebu-fixes-3.18-2' of git://git.infradead.org/linux-mvebu into fixesArnd Bergmann1-0/+2
Pull "mvebu fixes for v3.18 (round 2)" frm Jason Cooper: - mvebu - coherency.c needed an of_node_put() * tag 'mvebu-fixes-3.18-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: add missing of_node_put() call in coherency.c Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27Merge tag 'samsung-defconfig-v3.18' of ↵Arnd Bergmann1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull "Samsung defconfig update for v3.18" from Kukjin Kim: - enable max77802 rtc and clock drivers for exynos_defconfig : enable the kernel config options to have the drivers for max77802 including rtc and 2-ch 32kHz clock outputs * tag 'samsung-defconfig-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: exynos_defconfig: Enable max77802 rtc and clock drivers Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27Merge tag 'samsung-fixes-v3.18' of ↵Arnd Bergmann2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes Pull "Samsung fixes for v3.18" from Kukjin Kim: - explicitly set dr_mode on exynos5250-snow this is required when kernel is built with USB gadget support. * tag 'samsung-fixes-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Explicitly set dr_mode on exynos5250-snow Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-27ARM: tegra: irq: fix buggy usage of irq_data irq fieldMarc Zyngier1-11/+11
The crazy gic_arch_extn thing that Tegra uses contains multiple references to the irq field in struct irq_data, and uses this to directly poke hardware register. But irq is the *virtual* irq number, something that has nothing to do with the actual HW irq (stored in the hwirq field). And once we put the stacked domain code in action, the whole thing explodes, as these two values are *very* different: root@bacon-fat:~# cat /proc/interrupts CPU0 CPU1 16: 25801 2075 GIC 29 twd 17: 0 0 GIC 73 timer0 112: 0 0 GPIO 58 c8000600.sdhci cd 123: 0 0 GPIO 69 c8000200.sdhci cd 279: 1126 0 GIC 122 serial 281: 0 0 GIC 70 7000c000.i2c 282: 0 0 GIC 116 7000c400.i2c 283: 0 0 GIC 124 7000c500.i2c 284: 300 0 GIC 85 7000d000.i2c [...] Just replacing all instances of irq with hwirq fixes the issue. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-26arm/arm64: kvm: drop inappropriate use of kvm_is_mmio_pfn()Ard Biesheuvel1-1/+6
Instead of using kvm_is_mmio_pfn() to decide whether a host region should be stage 2 mapped with device attributes, add a new static function kvm_is_device_pfn() that disregards RAM pages with the reserved bit set, as those should usually not be mapped as device memory. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26arm64: KVM: fix unmapping with 48-bit VAsMark Rutland1-1/+2
Currently if using a 48-bit VA, tearing down the hyp page tables (which can happen in the absence of a GICH or GICV resource) results in the rather nasty splat below, evidently becasue we access a table that doesn't actually exist. Commit 38f791a4e499792e (arm64: KVM: Implement 48 VA support for KVM EL2 and Stage-2) added a pgd_none check to __create_hyp_mappings to account for the additional level of tables, but didn't add a corresponding check to unmap_range, and this seems to be the source of the problem. This patch adds the missing pgd_none check, ensuring we don't try to access tables that don't exist. Original splat below: kvm [1]: Using HYP init bounce page @83fe94a000 kvm [1]: Cannot obtain GICH resource Unable to handle kernel paging request at virtual address ffff7f7fff000000 pgd = ffff800000770000 [ffff7f7fff000000] *pgd=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.18.0-rc2+ #89 task: ffff8003eb500000 ti: ffff8003eb45c000 task.ti: ffff8003eb45c000 PC is at unmap_range+0x120/0x580 LR is at free_hyp_pgds+0xac/0xe4 pc : [<ffff80000009b768>] lr : [<ffff80000009cad8>] pstate: 80000045 sp : ffff8003eb45fbf0 x29: ffff8003eb45fbf0 x28: ffff800000736000 x27: ffff800000735000 x26: ffff7f7fff000000 x25: 0000000040000000 x24: ffff8000006f5000 x23: 0000000000000000 x22: 0000007fffffffff x21: 0000800000000000 x20: 0000008000000000 x19: 0000000000000000 x18: ffff800000648000 x17: ffff800000537228 x16: 0000000000000000 x15: 000000000000001f x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000020 x11: 0000000000000062 x10: 0000000000000006 x9 : 0000000000000000 x8 : 0000000000000063 x7 : 0000000000000018 x6 : 00000003ff000000 x5 : ffff800000744188 x4 : 0000000000000001 x3 : 0000000040000000 x2 : ffff800000000000 x1 : 0000007fffffffff x0 : 000000003fffffff Process swapper/0 (pid: 1, stack limit = 0xffff8003eb45c058) Stack: (0xffff8003eb45fbf0 to 0xffff8003eb460000) fbe0: eb45fcb0 ffff8003 0009cad8 ffff8000 fc00: 00000000 00000080 00736140 ffff8000 00736000 ffff8000 00000000 00007c80 fc20: 00000000 00000080 006f5000 ffff8000 00000000 00000080 00743000 ffff8000 fc40: 00735000 ffff8000 006d3030 ffff8000 006fe7b8 ffff8000 00000000 00000080 fc60: ffffffff 0000007f fdac1000 ffff8003 fd94b000 ffff8003 fda47000 ffff8003 fc80: 00502b40 ffff8000 ff000000 ffff7f7f fdec6000 00008003 fdac1630 ffff8003 fca0: eb45fcb0 ffff8003 ffffffff 0000007f eb45fd00 ffff8003 0009b378 ffff8000 fcc0: ffffffea 00000000 006fe000 ffff8000 00736728 ffff8000 00736120 ffff8000 fce0: 00000040 00000000 00743000 ffff8000 006fe7b8 ffff8000 0050cd48 00000000 fd00: eb45fd60 ffff8003 00096070 ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd20: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00000000 00000000 fd40: 00000ae0 00000000 006aa25c ffff8000 eb45fd60 ffff8003 0017ca44 00000002 fd60: eb45fdc0 ffff8003 0009a33c ffff8000 006f06e0 ffff8000 006f06e0 ffff8000 fd80: fd948b40 ffff8003 0009a320 ffff8000 00000000 00000000 00735000 ffff8000 fda0: 006d3090 ffff8000 006aa25c ffff8000 00735000 ffff8000 006d3030 ffff8000 fdc0: eb45fdd0 ffff8003 000814c0 ffff8000 eb45fe50 ffff8003 006aaac4 ffff8000 fde0: 006ddd90 ffff8000 00000006 00000000 006d3000 ffff8000 00000095 00000000 fe00: 006a1e90 ffff8000 00735000 ffff8000 006d3000 ffff8000 006aa25c ffff8000 fe20: 00735000 ffff8000 006d3030 ffff8000 eb45fe50 ffff8003 006fac68 ffff8000 fe40: 00000006 00000006 fe293ee6 ffff8003 eb45feb0 ffff8003 004f8ee8 ffff8000 fe60: 004f8ed4 ffff8000 00735000 ffff8000 00000000 00000000 00000000 00000000 fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 fea0: 00000000 00000000 00000000 00000000 00000000 00000000 000843d0 ffff8000 fec0: 004f8ed4 ffff8000 00000000 00000000 00000000 00000000 00000000 00000000 fee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ff80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffa0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 ffc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000005 00000000 ffe0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 Call trace: [<ffff80000009b768>] unmap_range+0x120/0x580 [<ffff80000009cad4>] free_hyp_pgds+0xa8/0xe4 [<ffff80000009b374>] kvm_arch_init+0x268/0x44c [<ffff80000009606c>] kvm_init+0x24/0x260 [<ffff80000009a338>] arm_init+0x18/0x24 [<ffff8000000814bc>] do_one_initcall+0x88/0x1a0 [<ffff8000006aaac0>] kernel_init_freeable+0x148/0x1e8 [<ffff8000004f8ee4>] kernel_init+0x10/0xd4 Code: 8b000263 92628479 d1000720 eb01001f (f9400340) ---[ end trace 3bc230562e926fa4 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Jungseok Lee <jungseoklee85@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-21ARM: 8216/1: xscale: correct auxiliary register in suspend/resumeDmitry Eremin-Solenikov1-2/+2
According to the manuals I have, XScale auxiliary register should be reached with opc_2 = 1 instead of crn = 1. cpu_xscale_proc_init correctly uses c1, c0, 1 arguments, but cpu_xscale_do_suspend and cpu_xscale_do_resume use c1, c1, 0. Correct suspend/resume functions to also use c1, c0, 1. The issue was primarily noticed thanks to qemu reporing "unsupported instruction" on the pxa suspend path. Confirmed in PXA210/250 and PXA255 XScale Core manuals and in PXA270 and PXA320 Developers Guides. Harware tested by me on tosa (pxa255). Robert confirmed on pxa270 board. Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-21ARM: exynos_defconfig: Enable max77802 rtc and clock driversJavier Martinez Canillas1-0/+2
Commit 6e80e3d87549 ("ARM: exynos_defconfig: Enable MAX77802") enabled support for the max77802 regulators but the PMIC also has a Real-Time-Clock (RTC) and 2-channel 32kHz clock outputs. Enable the kernel config options to have the drivers for these devices built-in since they are present in many Exynos boards. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-19ARM: multi_v7_defconfig: fix failure setting CPU voltage by enabling ↵Tyler Baker1-0/+1
dependent I2C controller This patch fixes a long standing issue introduced during the 3.16 merge window. Shortly after the merge, exynos5250-based arndale boards began to produce the following errors: kern.err kernel: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage kern.err kernel: cpufreq: __target_index: Failed to change cpu frequency: -22 Further analysis revealed that the S5M8767 voltage regulator used on the exynos5250-based arndale board utilizes the S3C2410 I2C controller. If the S3C2410 I2C controller driver is not enabled, the S5M8767 voltage regulator fails to probe. Therefore a dependency exists between these two drivers. In the exynos_defconfig both CONFIG_REGULATOR_S5M8767 and CONFIG_I2C_S3C2410 options are enabled, and no errors are produced. However, in the multi_v7_defconfig only the CONFIG_REGULATOR_S5M8767 option is enabled and the errors are present. So let's enable the CONFIG_I2C_S3C2410 option in the multi_v7_defconfig to allow the S5M8767 voltage regulator to probe. Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2014-11-19Merge tag 'tegra-for-3.18-fixes-for-rc5' of ↵Arnd Bergmann23-32/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into fixes Pull "ARM: tegra: Device tree fixes for v3.18-rc5" from Thierry Reding: This contains the serial port numbering fixes that are required for the serial port numbering to stay the same with or without the serial core making use of the aliases defined in DT. eMMC is also fixed for TN7 and Roth boards which were using the wrong regulators. * tag 'tegra-for-3.18-fixes-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: roth: Fix SD card VDD_IO regulator ARM: tegra: Remove eMMC vmmc property for roth/tn7 ARM: dts: tegra: move serial aliases to per-board ARM: tegra: Add serial port labels to Tegra124 DT Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19Merge tag 'renesas-clock-fixes-for-v3.18' of ↵Arnd Bergmann2-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Pull "Renesas ARM Based SoC Clock Fixes for v3.18" from Simon Horman: * Correct IIC0 parent clock for r8a7740 * Add missing INTCA clock for irqpin module for r8a7740 * Correct SD3CKCR address on r8a7790 * tag 'renesas-clock-fixes-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7740 legacy: Correct IIC0 parent clock ARM: shmobile: r8a7740 legacy: Add missing INTCA clock for irqpin module ARM: shmobile: r8a7790: Fix SD3CKCR address Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19Merge tag 'renesas-dt-fixes-for-v3.18' of ↵Arnd Bergmann2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Pull "Renesas ARM Based SoC DT Fixes for v3.18" from Simon Horman: * Correct IIC0 parent clock on r8a7740 * Correct SD3CKCR address to device tree on r8a7790 * tag 'renesas-dt-fixes-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7740 dtsi: Correct IIC0 parent clock ARM: shmobile: r8a7790: Fix SD3CKCR address to device tree Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19Merge tag 'renesas-soc-fixes-for-v3.18' of ↵Arnd Bergmann1-0/+20
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes Pull "Renesas ARM Based SoC Fixes for v3.18" from Simon Horman: * Set i2c clks_per_count to 2 on kzm9g * tag 'renesas-soc-fixes-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19Merge tag 'sunxi-fixes-for-3.18' of ↵Arnd Bergmann1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Merge "Allwinner fixes for 3.18" from Maxime Ripard: A fix for the A31 dma controller that requires the AHB clock to be parented to PLL6 in order to operate. * tag 'sunxi-fixes-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: dts: sun6i: Re-parent ahb1_mux to pll6 as required by dma controller Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19ARM: dts: Explicitly set dr_mode on exynos5250-snowSjoerd Simons2-1/+5
Explicitly set the dr_mode for the dwc3 controller on the Snow board to host mode. This is required to ensure the controller is initialized in the right mode if the kernel is build with USB gadget support. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-16Merge tag 'armsoc-for-rc5' of ↵Linus Torvalds12-18/+46
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "Another small set of fixes: - some DT compatible typo fixes - irq setup fix dealing with irq storms on orion - i2c quirk generalization for mvebu - a handful of smaller fixes for OMAP - a couple of added file patterns for OMAP entries in MAINTAINERS" * tag 'armsoc-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: at91/dt: Fix sama5d3x typos pinctrl: dra: dt-bindings: Fix output pull up/down MAINTAINERS: Update entry for omap related .dts files to cover new SoCs MAINTAINERS: add more files under OMAP SUPPORT ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage ARM: dts: am335x-evm: Fix 5th NAND partition's name ARM: orion: Fix for certain sequence of request_irq can cause irq storm ARM: mvebu: armada xp: Generalize use of i2c quirk
2014-11-16ARM: at91/dt: Fix sama5d3x typosPeter Rosin6-6/+6
Some DT files had a typo with a missing "5" in sama5d3x first compatible string. Signed-off-by: Peter Rosin <peda@axentia.se> [nicolas.ferre@atmel.com: modify commit log] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-16Merge tag 'omap-fixes-against-v3.18-rc4' of ↵Olof Johansson4-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.18-rc4" from Tony Lindgren: Few omap fixes for hangs and wrong pinctrl defines, and update MAINTAINERS file to avoid missing PMIC and SoC related patches: - Fix random hangs on am437x because of incorrect default value for the DDR regulator - Fix wrong partition name for NAND on am335x-evm - Fix wrong pinctrl defines for dra7xx - Update maintainers entries for PMICs and SoCs * tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: pinctrl: dra: dt-bindings: Fix output pull up/down MAINTAINERS: Update entry for omap related .dts files to cover new SoCs MAINTAINERS: add more files under OMAP SUPPORT ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage ARM: dts: am335x-evm: Fix 5th NAND partition's name Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-16Merge tag 'mvebu-fixes-3.18' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson2-5/+33
Merge "mvebu fixes for v3.18" from Jason Cooper: - Armada XP - Generalize i2c quirk - orion - Fix irq storm caused by specific sequence of request_irq * tag 'mvebu-fixes-3.18' of git://git.infradead.org/linux-mvebu: ARM: orion: Fix for certain sequence of request_irq can cause irq storm ARM: mvebu: armada xp: Generalize use of i2c quirk
2014-11-15Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2-4/+17
Pull ARM fixes from Russell King: "Two fixes this time, one to ensure that the kuser helper option depends on MMU as they aren't available for noMMU targets (and if the option is selected, we end up oopsing.) The second fix plugs a corner case with the decompressor, ensuring that the instruction stream can see the relocated code in every case on ARMv7 CPUs" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8198/1: make kuser helpers depend on MMU ARM: 8191/1: decompressor: ensure I-side picks up relocated code
2014-11-13ARM: 8198/1: make kuser helpers depend on MMUNathan Lynch1-0/+1
The kuser helpers page is not set up on non-MMU systems, so it does not make sense to allow CONFIG_KUSER_HELPERS to be enabled when CONFIG_MMU=n. Allowing it to be set on !MMU results in an oops in set_tls (used in execve and the arm_syscall trap handler): Unhandled exception: IPSR = 00000005 LR = fffffff1 CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 task: 8b838000 ti: 8b82a000 task.ti: 8b82a000 PC is at flush_thread+0x32/0x40 LR is at flush_thread+0x21/0x40 pc : [<8f00157a>] lr : [<8f001569>] psr: 4100000b sp : 8b82be20 ip : 00000000 fp : 8b83c000 r10: 00000001 r9 : 88018c84 r8 : 8bb85000 r7 : 8b838000 r6 : 00000000 r5 : 8bb77400 r4 : 8b82a000 r3 : ffff0ff0 r2 : 8b82a000 r1 : 00000000 r0 : 88020354 xPSR: 4100000b CPU: 0 PID: 1 Comm: swapper Not tainted 3.18.0-rc1-00041-ga30465a #216 [<8f002bc1>] (unwind_backtrace) from [<8f002033>] (show_stack+0xb/0xc) [<8f002033>] (show_stack) from [<8f00265b>] (__invalid_entry+0x4b/0x4c) As best I can tell this issue existed for the set_tls ARM syscall before commit fbfb872f5f41 "ARM: 8148/1: flush TLS and thumbee register state during exec" consolidated the TLS manipulation code into the set_tls helper function, but now that we're using it to flush register state during execve, !MMU users encounter the oops at the first exec. Prevent CONFIG_MMU=n configurations from enabling CONFIG_KUSER_HELPERS. Fixes: fbfb872f5f41 (ARM: 8148/1: flush TLS and thumbee register state during exec) Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com> Reported-by: Stefan Agner <stefan@agner.ch> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-13ARM: 8191/1: decompressor: ensure I-side picks up relocated codeWill Deacon1-4/+16
To speed up decompression, the decompressor sets up a flat, cacheable mapping of memory. However, when there is insufficient space to hold the page tables for this mapping, we don't bother to enable the caches and subsequently skip all the cache maintenance hooks. Skipping the cache maintenance before jumping to the relocated code allows the processor to predict the branch and populate the I-cache with stale data before the relocation loop has completed (since a bootloader may have SCTLR.I set, which permits normal, cacheable instruction fetches regardless of SCTLR.M). This patch moves the cache maintenance check into the maintenance routines themselves, allowing the v6/v7 versions to invalidate the I-cache regardless of the MMU state. Cc: <stable@vger.kernel.org> Reported-by: Marc Carino <marc.ceeeee@gmail.com> Tested-by: Julien Grall <julien.grall@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-13ARM: tegra: roth: Fix SD card VDD_IO regulatorAlexandre Courbot1-3/+1
vddio_sdmmc3 is a vdd_io, and thus should be under the vqmmc-supply property, not vmmc-supply. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13ARM: tegra: Remove eMMC vmmc property for roth/tn7Alexandre Courbot2-2/+0
This property was wrong and broke eMMC since commit 52221610d ("mmc: sdhci: Improve external VDD regulator support"). Align the eMMC properties to those of other Tegra boards. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13ARM: dts: tegra: move serial aliases to per-boardOlof Johansson22-23/+39
There are general changes pending to make the /aliases/serial* entries number the serial ports on the system. On Tegra, so far the ports have been just numbered dynamically as they are configured so that makes them change. To avoid this, add specific aliases per board to keep the old numbers. This allows us to change the numbering by default on future SoCs while keeping the numbering on existing boards. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13ARM: tegra: Add serial port labels to Tegra124 DTLucas Stach1-4/+4
These labels will be used to provide deterministic numbering of consoles in a later patch. Signed-off-by: Lucas Stach <dev@lynxeye.de> [treding@nvidia.com: drop aliases, reword commit message] Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-12ARM: shmobile: kzm9g legacy: Set i2c clks_per_count to 2Geert Uytterhoeven1-0/+20
On sh73a0/kzm9g-legacy, probing of the i2c masters fails with: i2c-sh_mobile i2c-sh_mobile.0: timing values out of range: L/H=0x208/0x1bf sh_mobile: probe of i2c-sh_mobile.0 failed with error -22 According to the datasheet, the transfer rate is derived from the HP clock (which runs at 104 MHz) divided by two. Hence i2c_sh_mobile_platform_data.clks_per_count should be set to two. Now probing succeeds, and i2c works: i2c-sh_mobile i2c-sh_mobile.0: I2C adapter 0 with bus speed 100000 Hz (L/H=0x104/0xe0) Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-10ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltageKeerthy1-2/+2
DCDC3 supplies voltage to DDR. Fix DCDC3 volatge to 1.5V which is the reset value. Programming to a non-reset value while executing from DDR will result in random hangs. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltageKeerthy1-2/+2
DCDC3 supplies voltage to DDR. Fix DCDC3 volatge to 1.5V which is the reset value. Programming to a non-reset value while executing from DDR will result in random hangs. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltageKeerthy1-2/+2
DCDC3 supplies voltage to DDR. Fix DCDC3 volatge to 1.5V which is the reset value. Programming to a non-reset value while executing from DDR will result in random hangs. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-10ARM: shmobile: r8a7740 dtsi: Correct IIC0 parent clockGeert Uytterhoeven1-1/+1
According to the datasheet, the operating clock for IIC0 is the HPP (RT Peri) clock, not the SUB (Peri) clock. Both clocks run at the same speed (50 Mhz). This is consistent with IIC0 being located in the A4R PM domain, and IIC1 in the A3SP PM domain. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-10ARM: shmobile: r8a7790: Fix SD3CKCR address to device treeShinobu Uehara1-2/+2
Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-10ARM: shmobile: r8a7740 legacy: Correct IIC0 parent clockGeert Uytterhoeven1-1/+1
According to the datasheet, the operating clock for IIC0 is the HPP (RT Peri) clock, not the SUB (Peri) clock. Both clocks run at the same speed (50 Mhz). This is consistent with IIC0 being located in the A4R PM domain, and IIC1 in the A3SP PM domain. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-10ARM: shmobile: r8a7740 legacy: Add missing INTCA clock for irqpin moduleGeert Uytterhoeven1-1/+6
This clock drives the irqpin controller modules. Before, it was assumed enabled by the bootloader or reset state. By making it available to the driver, we make sure it gets enabled when needed, and allow it to be managed by system or runtime PM. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-10ARM: shmobile: r8a7790: Fix SD3CKCR addressShinobu Uehara1-1/+1
Signed-off-by: Shinobu Uehara <shinobu.uehara.xc@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-08ARM: dts: zynq: Enable PL clocks for ParallellaAndreas Färber1-0/+4
The Parallella board comes with a U-Boot bootloader that loads one of two predefined FPGA bitstreams before booting the kernel. Both define an AXI interface to the on-board Epiphany processor. Enable clocks FCLK0..FCLK3 for the Programmable Logic by default. Otherwise accessing, e.g., the ESYSRESET register freezes the board, as seen with the Epiphany SDK tools e-reset and e-hw-rev, using /dev/mem. Cc: <stable@vger.kernel.org> # 3.17.x Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-08ARM: dts: sun6i: Re-parent ahb1_mux to pll6 as required by dma controllerChen-Yu Tsai1-0/+4
The dma controller requires that the ahb1 bus clock be driven by pll6 for peripheral access to work. Previously this was done in the dma controller driver, but was since removed as part of a series to unify the ahb1_mux and ahb1 clock drivers, in 14e0e28 dmaengine: sun6i: Remove obsolete clk muxing code Unfortunately the rest of that series did not make it, leaving us with broken dma on sun6i. This patch reparents ahb1_mux to pll6 using the DT assigned-clocks properties in the dma controller node. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-11-07ARM: mvebu: add missing of_node_put() call in coherency.cThomas Petazzoni1-0/+2
There is a missing of_node_put() to decrement the device_node reference counter after a of_find_matching_node() in coherency_init(). Fixes: 501f928e0097 ("ARM: mvebu: add a coherency_available() call") Cc: <stable@vger.kernel.org> # v3.16+ Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1414423955-5933-4-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-11-06ARM: dts: am335x-evm: Fix 5th NAND partition's nameRoger Quadros1-1/+1
The 5th NAND partition should be named "NAND.u-boot-spl-os" instead of "NAND.u-boot-spl". This is to be consistent with other TI boards as well as u-boot. Fixes: 91994facdd2d ("ARM: dts: am335x-evm: NAND: update MTD partition table") Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-05dma: edma: move device registration to platform codeArnd Bergmann1-0/+9
The horrible split between the low-level part of the edma support and the dmaengine front-end driver causes problems on multiplatform kernels. This is an attempt to improve the situation slightly by only registering the dmaengine devices that are actually present. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: add missing include of linux/dma-mapping.h] Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-05ARM: dts: vf610: add SD node to cosmic dtsOlof Johansson1-0/+19
Driver has been there since a while back, but the dts never seems to have been updated with the node (nor pinctrl). Do so now. Cc: Matt Porter <mporter@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-04Merge tag 'imx-fixes-3.18-2' of ↵Olof Johansson12-59/+134
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.18, 2nd round" from Shawn Guo: "This is the second round of i.MX fixes for 3.18. The clk-vf610 fix is relatively big, because it needs some adaption to the change made by offending commit dc4805c2e78b (ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver). And it should have been sent to you for earlier -rc inclusion, but unfortunately it got delayed for some time because Stefan wasn't aware of my email address change." The i.MX fixes for 3.18, 2nd round: - Fix a regression on Vybrid platform which is caused by commit dc4805c2e78b (ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver), and results in a missing configuration on PLL clocks. - Fix a regression with i.MX defconfig files where CONFIG_SPI option gets lost accidentally. * tag 'imx-fixes-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (460 commits) ARM: imx: Fix the removal of CONFIG_SPI option ARM: imx: clk-vf610: define PLL's clock tree + Linux 3.18-rc3 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-04ARM: imx: Fix the removal of CONFIG_SPI optionFabio Estevam2-0/+2
Since 64546e9fe3a5b8c ("ARM: imx_v6_v7_defconfig updates") and commit 0650f855d2e4b0b9 ("ARM: imx_v4_v5_defconfig: Select CONFIG_IMX_WEIM") CONFIG_SPI selection was dropped by savedefconfig for imx_v4_v5_defconfig and imx_v6_v7_defconfig. In order to keep the same behaviour as previous kernel versions and avoid regressions, let's add CONFIG_SPI option back. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-04ARM: imx: clk-vf610: define PLL's clock treeStefan Agner1-42/+92
So far, the required PLL's (PLL1/PLL2/PLL5) have been initialized by boot loader and the kernel code defined fixed rates according to those default configurations. Beginning with the USB PLL7 the code started to initialize the PLL's itself (using imx_clk_pllv3). However, since commit dc4805c2e78ba5a22ea1632f3e3e4ee601a1743b (ARM: imx: remove ENABLE and BYPASS bits from clk-pllv3 driver) imx_clk_pllv3 no longer takes care of the ENABLE and BYPASS bits, hence the USB PLL were not configured correctly anymore. This patch not only fixes those USB PLL's, but also makes use of the imx_clk_pllv3 for all PLL's and alignes the code with the PLL support of the i.MX6 series. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2014-11-02Merge tag 'fixes-against-v3.18-rc2' of ↵Olof Johansson4-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge "omap fixes against v3.18-rc2" from Tony Lindgren: Few fixes for omaps to enable NAND BCH so devices won't produce errors when booted with omap2plus_defconfig, and reduce bloat by making IPV6 a loadable module. Also let's add a warning about legacy boot being deprecated for omap3. We now have things working with device tree, and only omap3 is still booting in legacy mode. So hopefully this warning will help move the remaining legacy mode users to boot with device tree. As the total reduction of code and static data is somewhere around 20000 lines of code once we remove omap3 legacy mode booting, we really do want to make omap3 to boot also in device tree mode only over the next few merge cycles. * tag 'fixes-against-v3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (407 commits) ARM: OMAP2+: Warn about deprecated legacy booting mode ARM: omap2plus_defconfig: Fix errors with NAND BCH ARM: omap2plus_defconfig: Fix bloat caused by having ipv6 built-in + Linux 3.18-rc2 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-11-02Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds5-9/+23
Pull ARM fixes from Russell King: - add the new bpf syscall to ARM. - drop a redundant return statement in __iommu_alloc_remap() - fix a performance issue noticed by Thomas Petazzoni with kmap_atomic(). - fix an issue with the L2 cache OF parsing code which caused it to incorrectly print warnings on each boot, and make the warning text more consistent with the rest of the code * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8180/1: mm: implement no-highmem fast path in kmap_atomic_pfn() ARM: 8183/1: l2c: Improve l2c310_of_parse() error message ARM: 8181/1: Drop extra return statement ARM: 8182/1: l2c: Make l2x0_cache_size_of_parse() return 'int' ARM: enable bpf syscall
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 04:48:30 +0000