summaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2020-08-03Merge tag 'arm-newsoc-5.9' of ↵Linus Torvalds1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull new ARM SoC support from Arnd Bergmann: "There are three SoC families newly dded to the 32-bit and 64-bit Arm architecture code in the kernel this time: - Daniel Palmer adds initial support for two chips made by MStar, a taiwanese SoC manufacturer that became part of Mediatek in 2012. For now, the added support is fairly minimal, with just two of its Cortex-A7 based 32-bit camera chips getting support for a limited set of on-chip peripherals. - Lars Povlsen from Microchip adds support for their new Sparx5 family of ethernet switch chips using 64-bit Cortex-A53 cores. These are descended from earlier VSC7xxx SparX and Ocelot chips using 32-bit MIPS cores. - Daniele Alessandrelli from Intel adds support for the new Keem Bay SoC for computer vision, built around a Movidius VPU with Linux running on Arm Cortex-A53 cores" * tag 'arm-newsoc-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) ARM: mstar: Correct the compatible string for pmsleep dt-bindings: arm: mstar: remove the binding description for mstar,pmsleep dt-bindings: mfd: syscon: add compatible string for mstar,msc313-pmsleep ARM: mstar: Add reboot support ARM: mstar: Add "pmsleep" node to base dtsi ARM: mstar: Add PMU ARM: mstar: Adjust IMI size for infinity3 ARM: mstar: Adjust IMI size for mercury5 ARM: mstar: Adjust IMI size of infinity ARM: mstar: Add IMI SRAM region dt-bindings: arm: mstar: Move existing MStar binding descriptions dt-bindings: arm: mstar: Add binding details for mstar, pmsleep ARM: mstar: Fix dts filename for 70mai midrive d08 ARM: mstar: Add dts for 70mai midrive d08 ARM: mstar: Add dts for msc313(e) based BreadBee boards ARM: mstar: Add mercury5 series dtsis ARM: mstar: Add infinity/infinity3 family dtsis ARM: mstar: Add Armv7 base dtsi ARM: mstar: Add binding details for mstar,l3bridge ARM: mstar: Add machine for MStar/Sigmastar Armv7 SoCs ...
2020-07-28ARM: mstar: Fix dts filename for 70mai midrive d08Daniel Palmer1-1/+1
Fixes the filename for the 70mai midrive d08 dts. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Add dts for 70mai midrive d08Daniel Palmer1-1/+2
Adds initial support for the 70mai midrive d08 dash camera. Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: mstar: Add dts for msc313(e) based BreadBee boardsDaniel Palmer1-0/+3
BreadBee is an opensource development board based on the MStar msc313(e) SoC. Hardware details, schematics and so on can be found at: https://github.com/breadbee/breadbee Signed-off-by: Daniel Palmer <daniel@0x0f.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28Merge tag 'aspeed-5.9-devicetree' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.9 There is one new machine; AMD's EthanolX reference platform with an AST2600 BMC. Misc updates for Rainier, Tacoma, Wedge and Mihawk machines. * tag 'aspeed-5.9-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (26 commits) ARM: dts: Aspeed: tacoma: Enable EHCI controller ARM: dts: aspeed: rainier: Enable EHCI controller ARM: dts: aspeed: rainier: Switch OCCs to P10 ARM: dts: aspeed: rainier: Add FSI I2C masters ARM: dts: aspeed: rainier: Add CFAM SPI controllers ARM: dts: aspeed: rainier: Add I2C buses for NVMe use ARM: dts: aspeed: Initial device tree for AMD EthanolX ARM: dts: rainier: Describe GPIO mux on I2C3 ARM: dts: aspeed: wedge40: Enable pwm_tacho device ARM: dts: aspeed: wedge40: Enable ADC device ARM: dts: aspeed: wedge40: Disable unused i2c controllers ARM: dts: aspeed: cmm: Fixup I2C tree ARM: dts: aspeed: tacoma: Add CFAM reset GPIO ARM: dts: aspeed: rainier: Add CFAM reset GPIO ARM: dts: aspeed: tacoma: Fix gpio-key definitions ARM: dts: rainier: Configure ball Y23 as GPIOP7 for MCLR_VPP ARM: dts: aspeed: rainier: Add second cfam on the hub ARM: dts: aspeed: rainier: Add line-name checkstop ARM: dts: aspeed: tacoma: Remove checkstop gpio-key ARM: dts: aspeed: tacoma: Enable XDMA engine ... Link: https://lore.kernel.org/r/CACPK8Xf_Np7LtcDFhywi6Uk1EgUpb0pVVa+Lr9YEwBRjbjOKCQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-28ARM: dts: aspeed: Initial device tree for AMD EthanolXSupreeth Venkatesh1-0/+1
Initial introduction of AMD EthanolX platform equipped with an Aspeed ast2500 BMC manufactured by AMD. AMD EthanolX platform is an AMD customer reference board with an Aspeed ast2500 BMC manufactured by AMD. This adds AMD EthanolX device tree file including the flash layout used by EthanolX BMC machines. Signed-off-by: Supreeth Venkatesh <supreeth.venkatesh@amd.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-07-23Merge tag 'v5.9-rockchip-dts32-1' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Biggest part is the addition of the rk3288 variant of the VMARC SOM and it's Rock Pi N8 icarnation. This brings some arm64 dts-changes with it as the underlying Dalang carrier board is shared by both an arm32 rk3288 SOM and an arm64 rk3399 SOM (Rock Pi N10). Other than that rk3288 gets its ohci node added that only works on the fixed rk3288w variant of the soc and some asorted fixes and improvements for dt-binding-check. * tag 'v5.9-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add PCIe for RockPI N10 ARM: dts: rockchip: Add HDMI out for RockPI N8/N10 ARM: dts: rockchip: Add USB for RockPI N8/N10 ARM: dts: rockchip: Add usb host0 ohci node for rk3288 ARM: dts: rockchip: Fix VBUS on rk3288-vyasa ARM: dts: rockchip: Add Radxa Rock Pi N8 initial support ARM: dts: rockchip: Add VMARC RK3288 SOM initial support dt-bindings: arm: rockchip: Add Rock Pi N8 binding arm64: dts: rk3399pro: vmarc-som: Move common properties into Carrier arm64: dts: rk3399pro: vmarc-som: Move supply regulators into Carrier arm64: dts: rk3399pro: vmarc-som: Fix sorting nodes, properties ARM: dts: rockchip: dalang-carrier: Move i2c nodes into SOM ARM: dts: rockchip: Add 'arm,pl330-periph-burst' for dmac ARM: dts: rockchip: Add marvell BT irq config ARM: dts: rockchip: rename label and nodename pinctrl subnodes that end with gpio Link: https://lore.kernel.org/r/2472314.kD9Egx1jfM@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'qcom-dts-for-5.9' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm ARM dts updates for v5.9 Add QFPROM and ethernet for ipq8064 and a new DTS for the MikroTik RB3011 using the same platform. * tag 'qcom-dts-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: ARM: dts: qcom: add qfprom definition to ipq806x ARM: dts: qcom: Add MikroTik RB3011 ARM: dts: qcom: add ethernet definitions to ipq8064 Link: https://lore.kernel.org/r/20200721045032.3430395-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-22Merge tag 'imx-dt-5.9' of ↵Arnd Bergmann1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree update for 5.9: - New board support: Protonic PRTI6Q/WD2/VT7/RVT and MYiR MYS-6ULX SBC. - Update IIM, OCOTP and SD/MMC device node name to match .yaml bindings. - Make tempmon node as child of anatop node according to hardware architecture. - The vf610-zii device update: configure fiber port to 1000BaseX, add switch watchdog, MDIO speed and preamble. - A series from Fabio Estevam to update imx6qdl-sabresd and imx6q-tbs2910 for using MDIO node and reset-assert-us. - Align L2 cache-controller device node name with .yaml schema. - Enable SATA support for imx6qp-sabreauto and imx6qp-sabresd board. - A series of patches from Shengjiu Wang to enable various audio support on i.MX6 devices. - Add Gateworks System Controller support for imx6qdl-gw devices. - Change default #pwm-cells setting to <3> in the SoC dtsi files. - Other small random changes. * tag 'imx-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (43 commits) ARM: dts: vf610-zii-ssmb-spu3: Add node for switch watchdog ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties ARM: dts: imx6q-tbs2910: Pass reset-assert-us ARM: dts: imx6q-tbs2910: Add an mdio node ARM: dts: imx6qdl-sabresd: Pass reset-assert-us ARM: dts: imx6qdl-sabresd: Add an mdio node ARM: dts: imx6qdl-gw: add Gateworks System Controller support ARM: dts: imx6ull: add MYiR MYS-6ULX SBC ARM: dts: vf610-zii-spb4: Add node for switch watchdog ARM: dts: colibri-imx6: remove pinctrl-names orphan ARM: dts: imx: default to #pwm-cells = <3> in the SoC dtsi files ARM: dts: vf610-zii-scu4-aib: Configure fibre ports to 1000BaseX ARM: dts: vf610-zii-dev-rev-c: Configure fiber port to 1000BaseX ARM: dts: ZII: update MDIO speed and preamble ARM: dts: vfxxx: Add node for CAAM ARM: dts: imx6qp-sabresd: enable sata ARM: dts: imx6qp-sabreauto: enable sata ARM: dts: add Protonic RVT board ARM: dts: add Protonic VT7 board ARM: dts: add Protonic WD2 board ... Link: https://lore.kernel.org/r/20200720085536.24138-3-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-18ARM: dts: rockchip: Add Radxa Rock Pi N8 initial supportJagan Teki1-0/+1
Rock Pi N8 is a Rockchip RK3288 based SBC, which has - VMARC RK3288 SOM (as per SMARC standard) from Vamrs. - Compatible carrier board from Radxa. VAMRC RK3288 SOM need to mount on top of radxa dalang carrier board for making Rock Pi N8 SBC. So, add initial support for Rock Pi N8 by including rk3288, rk3288 vamrc-som and raxda dalang carrier board dtsi files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Link: https://lore.kernel.org/r/20200715083418.112003-8-jagan@amarulasolutions.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2020-07-17Merge tag 'tegra-for-5.9-arm-dt' of ↵Arnd Bergmann1-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt ARM: tegra: Device tree changes for v5.9-rc1 This adds device trees for the ASUS Google Nexus 7 and Acer Iconia Tab A500. In addition there are a slew of fixes to existing device trees in preparation for validating the DTBs against json-schema. * tag 'tegra-for-5.9-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (38 commits) ARM: tegra: Add device-tree for ASUS Google Nexus 7 ARM: tegra: Add device-tree for Acer Iconia Tab A500 ARM: tegra: Add HDMI supplies on Nyan boards ARM: tegra: Add missing DSI controller on Tegra30 ARM: tegra: Add i2c-bus subnode for DPAUX controllers ARM: tegra: The Tegra30 SDHCI is not backwards-compatible ARM: tegra: The Tegra30 DC is not backwards-compatible ARM: tegra: Remove spurious comma from node name ARM: tegra: Add parent clock to DSI output ARM: tegra: Use standard names for SRAM nodes ARM: tegra: seaboard: Use standard battery bindings ARM: tegra: Use standard names for LED nodes ARM: tegra: Use numeric unit-addresses ARM: tegra: medcom-wide: Remove extra panel power supply ARM: tegra: Use proper unit-addresses for OPPs ARM: tegra: Add missing clock-names for SDHCI controllers ARM: tegra: Fix order of XUSB controller clocks ARM: tegra: Add #reset-cells to Tegra124 memory controller ARM: tegra: Add missing panel power supplies ARM: tegra: Add micro-USB A/B port on Jetson TK1 ... Link: https://lore.kernel.org/r/20200717161300.1661002-5-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-07-16ARM: tegra: Add device-tree for ASUS Google Nexus 7Dmitry Osipenko1-0/+3
There are few hardware variants of NVIDIA Tegra30-based Nexus 7 device: 1. WiFi-only (named Grouper) 2. GSM (named Tilapia) 3. Using Maxim PMIC (E1565 board ID) 4. Using Ti PMIC (PM269 board ID) This patch adds device-trees for known and tested variants. Link: https://wiki.postmarketos.org/wiki/Google_Nexus_7_2012_(asus-grouper) Tested-by: Pedro Ângelo <pangelo@void.io> Tested-by: Matt Merhar <mattmerhar@protonmail.com> Tested-by: Zack Pearsall <zpearsall@yahoo.com> Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-16ARM: tegra: Add device-tree for Acer Iconia Tab A500Dmitry Osipenko1-0/+1
Add device-tree for Acer Iconia Tab A500, which is NVIDIA Tegra20-based tablet device. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2020-07-13ARM: dts: imx6ull: add MYiR MYS-6ULX SBCParthiban Nallathambi1-0/+1
Add support for the MYiR imx6ULL based single board computer equipped with on board 256MB NAND & RAM. The board also provides expansion header for expansion board, but this commit adds only support for SBC. Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: add Protonic RVT boardOleksij Rempel1-0/+1
Protonic RVT is an internal development platform for a wireless ISObus Virtual Terminal based on COTS tablets, and the predecessor of the WD2 platform. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: add Protonic VT7 boardOleksij Rempel1-0/+1
The Protonic VT7 is a mid-class ISObus Virtual Terminal with a 7 inch touchscreen display. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Robin van der Gracht <robin@protonic.nl> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: add Protonic WD2 boardOleksij Rempel1-0/+1
Add support for the Protonic WD2 board, which is an internal development platform for low-cost agricultural Virtual Terminals based on COTS tablets and web applications. It inherits from the PRTI6Q base class. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: add Protonic PRTI6Q boardOleksij Rempel1-0/+1
Protonic PRTI6Q is a development board and a base class for different specific customer application boards based on the i.MX6 family of SoCs, developed by Protonic Holland. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-07-13ARM: dts: imx6sx-sdb: Add MQS supportShengjiu Wang1-0/+1
Add MQS support. As the pin conflict with usdhc2, then need to add a separate dts. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-06-15ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Add device tree for camera DBLad Prabhakar1-0/+1
Add support for the camera daughter board which is connected to iWave's RZ/G1H Qseven carrier board. Also enable ttySC[0135] and ethernet1 interfaces. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1591552659-21314-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-28ARM: dts: qcom: Add MikroTik RB3011Jonathan McDowell1-0/+1
This patch adds a DTS file for the MikroTik RouterBoard 3011, which is a 1U rackmount router based on the IPQ8064, supporting the serial UART, dual QCA8337 Gigabit ethernet switches, boot loader NOR and user LED device. Signed-off-by: Jonathan McDowell <noodles@earth.li> Link: https://lore.kernel.org/r/75390e66c9e6e36ddd42dc7f54cac28dfd7a24b9.1589824955.git.noodles@earth.li Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-05-26Merge tag 'imx-dt-5.8' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree changes for 5.8: - A series from Anson Huang updating SRC devices to match bindings schema definition. - Correct CPU supply name and add cpu1 supply for i.MX7D. - Convert thermal device to use nvmem interface to get fuse data for imx6qdl and imx6sl. - A series from Tim Harvey to update imx6qdl-gw devices, adding support of LSM9DS1 IIO imu/magn, USB OTG, bcm4330-bt, etc. - Add input MUX for ENET2 MDIO into IMX7D pin functions. - Misc random device addition or update. * tag 'imx-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits) ARM: dts: imx53-cx9020: Group port definitions for the dvi-converter ARM: dts: imx5: make src node name generic ARM: dts: imx50: Add src node interrupt ARM: dts: imx: make src node name generic ARM: dts: imx7d-pinfunc: add input mux for ENET2 mdio ARM: dts: imx6sl: Use nvmem interface to get fuse data ARM: dts: imx6qdl: Use nvmem interface to get fuse data ARM: dts: imx6qdl-gw5910: fix wlan regulator ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn support ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn support ARM: dts: imx53: Add src node interrupt ARM: dts: imx51: Add src node interrupt ARM: dts: imx50: Remove unused iomuxc-gpr node ARM: dts: imx6qdl-gw552x: add USB OTG support ARM: dts: imx6-sr-som: add ethernet PHY configuration arm: dts: ls1021atwr: Add QSPI node properties ARM: dts: e60k02: add interrupt for PMIC ARM: dts: colibri: introduce device trees with UHS-I support ARM: dts: imx7d: Add cpu1 supply ... Link: https://lore.kernel.org/r/20200523032516.11016-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'mvebu-dt-5.8-1' of git://git.infradead.org/linux-mvebu into arm/dtArnd Bergmann1-0/+1
mvebu dt for 5.8 (part 1) Add LCP panel support on ReadyNAS NV+v2 Add new board: Check Point L-50, kirkwood based SoC router Remove unused property 'timeout-ms' in i2c nodes * tag 'mvebu-dt-5.8-1' of git://git.infradead.org/linux-mvebu: ARM: dts: kirkwood: ReadyNAS NV+v2: Add LCD panel ARM: dts: kirkwood: Add Check Point L-50 board ARM: dts: marvell: drop i2c timeout-ms property Link: https://lore.kernel.org/r/87blmiefgw.fsf@FE-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'at91-5.8-dt' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT for 5.8 - New board: Microchip SAMA5D2 Industrial Connectivity Platform - All SoCs are now converted to the new PMC device tree binding - sama5d2 flexcom nodes are now fully described in sama5d2.dtsi * tag 'at91-5.8-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: (35 commits) ARM: dts: at91: sama5d2_xplained: Add aliases for the dedicated I2C IPs ARM: dts: at91: Configure I2C SCL gpio as open drain ARM: dts: at91: sama5d2_xplained: Describe the flx0 I2C function ARM: dts: at91: sama5d2_ptc_ek: Add comments to describe the aliases ARM: dts: at91: sama5d2_xplained: Add alias for DBGU ARM: dts: at91: sama5d2: Add missing flexcom definitions ARM: dts: at91: sama5d2: Remove i2s and tcb aliases from SoC dtsi ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and I2C flx0 functions ARM: dts: at91: sama5d2: Add DMA bindings for the flx1 I2C function ARM: dts: at91: sama5d2: Add DMA bindings for the flx3 SPI function ARM: dts: at91: sama5d2: Add DMA bindings for the SPI and UART flx4 functions ARM: dts: at91: sama5d2: Specify the FIFO size for the Flexcom UART ARM: dts: at91: sama5d2: Move flx0 definitions in the SoC dtsi ARM: dts: at91: sama5d2: Move flx1 definitions in the SoC dtsi ARM: dts: at91: sama5d2: Move flx2 definitions in the SoC dtsi ARM: dts: at91: sama5d2: Move flx3 definitions in the SoC dtsi ARM: dts: at91: sama5d2: Move flx4 definitions in the SoC dtsi ARM: dts: at91: sama5d2: Fix the label numbering for flexcom functions ARM: dts: at91: sama5d27_wlsom1: Add alias for i2c0 ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP ... Link: https://lore.kernel.org/r/20200518212844.GA26356@piout.net Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'sunxi-dt-for-5.8-1' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual number of patches to improve the Allwinner Device Tree support, including: - Support for the IOMMU on the H6 - Support for cpufreq / thermal throttling on the H6 - Support for the mailbox on the A64, A83t, H3, H5 and H6 - New boards: A20-OLinuXino-LIME-eMMC * tag 'sunxi-dt-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (23 commits) arm64: dts: allwinner: h6: Add IOMMU arm64: dts: allwinner: h6: Enable CPU opp tables for Tanix TX6 arm64: dts: allwinner: h6: add voltage range to OPP table arm64: dts: allwinner: sun50i-a64: Add missing address/size-cells arm64: dts: allwinner: h6: Enable CPU opp tables for Pine H64 arm64: dts: allwinner: Sort Pine H64 device-tree nodes arm64: dts: allwinner: h6: Enable CPU opp tables for Orange Pi 3 arm64: dts: allwinner: h6: Enable CPU opp tables for Beelink GS1 arm64: dts: allwinner: h6: Add CPU Operating Performance Points table arm64: dts: allwinner: h6: Add thermal trip points/cooling map arm64: dts: allwinner: h6: Add clock to CPU cores arm64: allwinner: h6: orangepi-lite2: Support BT+WIFI combo module arm64: dts: allwinner: h6: orangepi: Disable OTG mode arm64: dts: allwinner: h6: orangepi: Add gpio power supply ARM: dts: sun8i-h2-plus-bananapi-m2-zero: Fix led polarity arm64: dts: allwinner: h6: Add msgbox node arm64: dts: allwinner: a64: Add msgbox node ARM: dts: sunxi: h3/h5: Add msgbox node ARM: dts: sunxi: a83t: Add msgbox node ARM: dts: sun8i-h3: add opp table for mali gpu ... Link: https://lore.kernel.org/r/cfa66bd9-f74c-4614-9ea5-9ef8546cc571.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'renesas-arm-dt-for-v5.8-tag2' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt Renesas ARM DT updates for v5.8 (take two) - Initial support for the Renesas RZ/G1H SoC on the iWave RainboW Qseven SOM (G21M) and board (G21D), - Support for the AISTARVISION MIPI Adapter V2.1 camera board on the Silicon Linux EK874 RZ/G2E evaluation kit. * tag 'renesas-arm-dt-for-v5.8-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI Adapter V2.1 ARM: dts: r8a7742: Add GPIO nodes ARM: dts: r8a7742: Add [H]SCIF{A|B} support ARM: dts: r8a7742: Add IRQC support ARM: dts: r8a7742-iwg21d-q7: Add iWave G21D-Q7 board based on RZ/G1H ARM: dts: r8a7742-iwg21m: Add iWave RZ/G1H Qseven SOM ARM: dts: r8a7742: Initial SoC device tree clk: renesas: Add r8a7742 CPG Core Clock Definitions dt-bindings: power: rcar-sysc: Add r8a7742 power domain index macros Link: https://lore.kernel.org/r/20200515100547.14671-3-geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'stm32-dt-for-v5.8-1' of ↵Arnd Bergmann1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.8, round 1 Highlights: ---------- MCU part: -fix a typo for DAC io-channel-cells on f429 and h743 MPU part: -Generic: -Bump tp PSCI 1.0 -Fix a typo for DAC io-channel-cells -Add M4 pdds for deep sleep mode -Add I2C fatmode plus support -Add new Octavio lxa-mc1 board based on OSDMP15x SiP -Add new Stinger96 board support. It is a 96Boards IoT Extended board based on stm32mp157a SoC. Some figures: 256MB DDR, 125MB and flash, Onboard BG96 modem... -Add IoT Box board support based on stinger96 board + Wifi/BT, CCS811 VOC sensor, 2 digitals microphones ... -DH: -Adapt dhcom-som and dhcom-pdk2 dts(i) files to STM32MP15 SoC diversity -Add GPIO led and GPIO keys support on PDK2 board -AV96: -Major rework to support official avenger96 board based on DHCOR SOM. -Prototype board is no more supported * tag 'stm32-dt-for-v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (58 commits) ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 board ARM: dts: stm32: Split SoC-independent parts of DHCOM SOM and PDK2 ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2 ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2 ARM: dts: stm32: Add IoT Box board support dt-bindings: arm: stm32: Document IoT Box compatible ARM: dts: stm32: Add Stinger96 board support dt-bindings: arm: stm32: Document Stinger96 compatible ARM: dts: stm32: Add missing pinctrl entries for STM32MP15 dt-bindings: Add vendor prefix for Shiratech Solutions ARM: dts: stm32: Add bindings for SPI2 on AV96 ARM: dts: stm32: Add alternate pinmux for SPI2 pins ARM: dts: stm32: Add bindings for ADC on AV96 ARM: dts: stm32: Add alternate pinmux for ADC pins ARM: dts: stm32: Add bindings for FDCAN2 on AV96 ARM: dts: stm32: Add alternate pinmux for FDCAN2 pins ARM: dts: stm32: Add bindings for FDCAN1 on AV96 ARM: dts: stm32: Add alternate pinmux for FDCAN1 pins ARM: dts: stm32: Repair I2C2 operation on AV96 ARM: dts: stm32: Add alternate pinmux for I2C2 pins ... Link: https://lore.kernel.org/r/19160355-364d-170c-7ae2-5ba7f714103f@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'samsung-dt-5.8' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.8 1. Add DTS for Exynos4210-based Samsung Galaxy S2 (GT-I9100) mobile phone, 2. Enable WiFi and Bluetooth in multiple boards, 3. Add new features to S5Pv210-based Aries family of mobile phones (e.g. Samsung Galaxy S): necessary configuration for suspend, audio support, USB mux, touch keys, panel, i2c-gpio adapters, FM radio, ADC, 4. Many minor fixes (e.g. GPIO polarity, interrupts). * tag 'samsung-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (29 commits) ARM: dts: s5pv210: Set MAX8998 GPIO pulls on Aries boards ARM: dts: s5pv210: Correct FIMC definitions ARM: dts: s5pv210: Assign clocks to MMC devices on Aries boards ARM: dts: s5pv210: Enable ADC on Aries boards ARM: dts: s5pv210: Add an ADC node ARM: dts: s5pv210: Disable pull for vibrator enable GPIO on Aries boards ARM: dts: s5pv210: Add si470x FM radio to Galaxy S ARM: dts: s5pv210: Add remaining i2c-gpio adapters to Aries boards ARM: dts: s5pv210: Add panel support to Aries boards ARM: dts: s5pv210: Add touchkey support to Aries boards ARM: dts: s5pv210: Add FSA9480 support to Aries boards ARM: dts: s5pv210: Add WM8994 support to Aries boards ARM: dts: s5pv210: Disable pulls on GPIO I2C adapters for Aries ARM: dts: s5pv210: Set keep-power-in-suspend for SDHCI1 on Aries ARM: dts: s5pv210: Correct gpi pinctrl node name ARM: dts: s5pv210: Add sleep GPIO configuration for Galaxy S ARM: dts: s5pv210: Add sleep GPIO configuration for Fascinate4G ARM: dts: s5pv210: Add helper define for sleep gpio config ARM: dts: exynos: Enable WLAN support for the UniversalC210 board ARM: dts: exynos: Enable WLAN support for the Rinato board ... Link: https://lore.kernel.org/r/20200512122922.5700-2-krzk@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'realtek-dt-for-5.8' of ↵Arnd Bergmann1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/dt Realtek Arm based SoC DT for v5.8 Add RTD1195, RTD1395 and RTD1619 SoCs as well as Xnano X5 TV box. Clean up memory nodes and /soc ranges. Factor out r-bus and partition it into CRT, Iso, Misc, SB2 and SCPU Wrapper blocks. * tag 'realtek-dt-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek: (35 commits) dt-bindings: reset: rtd1295: Add SB2 reset arm64: dts: realtek: rtd16xx: Add SB2 and SCPU Wrapper syscon nodes arm64: dts: realtek: rtd139x: Add SB2 and SCPU Wrapper syscon nodes arm64: dts: realtek: rtd129x: Add SB2 and SCPU Wrapper syscon nodes ARM: dts: rtd1195: Add SB2 and SCPU Wrapper syscon nodes arm64: dts: realtek: rtd16xx: Add CRT syscon node ARM: dts: rtd1195: Add UART resets ARM: dts: rtd1195: Add reset nodes dt-bindings: reset: Add Realtek RTD1195 ARM: dts: rtd1195: Add CRT syscon node arm64: dts: realtek: rtd16xx: Introduce iso and misc syscon arm64: dts: realtek: rtd139x: Introduce CRT, iso and misc syscon arm64: dts: realtek: rtd129x: Introduce CRT, iso and misc syscon ARM: dts: rtd1195: Introduce iso and misc syscon arm64: dts: realtek: rtd1295: Add Xnano X5 dt-bindings: arm: realtek: Add Xnano X5 dt-bindings: vendor-prefixes: Add Xnano arm64: dts: realtek: rtd16xx: Add memory reservations arm64: dts: realtek: rtd16xx: Carve out boot ROM from memory arm64: dts: realtek: Add RTD1619 SoC and Realtek Mjolnir EVB ... Link: https://lore.kernel.org/r/20200510232158.18477-2-afaerber@suse.de Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'aspeed-5.8-devicetree' of ↵Arnd Bergmann1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt ASPEED device tree updates for 5.8 New machines: - YADRO's ast2500 OpenPower P9 Nicole BMC - Facebook's ast2500 x86 Yosemite V2 BMC The AST2600 machines Rainier and Tacoma were fleshed out. Machines have started describing the GPIO names as userspace attempts to use the GPIO chardev API. * tag 'aspeed-5.8-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed: (32 commits) ARM: dts: aspeed: Change KCS nodes to v2 binding ARM: dts: Aspeed: AST2600: Add XDMA PCI-E root control reset ARM: dts: aspeed: ast2600: Add XDMA Engine ARM: dts: aspeed: ast2500: Add XDMA Engine ARM: dts: aspeed: Adding Facebook Yosemite V2 BMC ARM: dts: aspeed: Add YADRO Nicole BMC ARM: dts: aspeed: mihawk: add aliases for i2c ARM: dts: aspeed: tacoma: Add TPM ARM: dts: aspeed: tacoma: Enable the second VUART ARM: dts: aspeed: tacoma: Add iio-hwmon nodes for IIO devices ARM: dts: aspeed: rainier: Add VGA reserved memory region ARM: dts: aspeed: rainier: Add gpio line names ARM: dts: aspeed: tacoma: Add gpio line names ARM: dts: aspeed: zaius: Add gpio line names ARM: dts: aspeed: romulus: Add gpio line names ARM: dts: aspeed: witherspoon: Add gpio line names ARM: dts: aspeed: ast2600: Set arch timer always-on ARM: dts: aspeed: tacoma: Add GPIOs for FSI ARM: dts: aspeed: mihawk: Change the name of leds ARM: dts: aspeed: rainier: Remove regulators ... Link: https://lore.kernel.org/r/CACPK8Xd-=XFREvvS-mK_ECyn14y0GPAMyy5BpEEUYfaw4jAgsw@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-21Merge tag 'omap-for-v5.8/dt-signed' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt DTS changes for omaps for v5.8 merge window We add support for beaglebone-ai board that's am5729 based devices. Then we have a series changes to configure more hardware acceletators found on omap variants. With the recent ti-sysc related changes, we can now better configure the accelerators with help of the clock framework and reset driver. So with a series of changes from Suman Anna and Tero Kristo, let's configure IPUs and DSPs for dra7 devices like beagle-x15. And let's also configure the missing crypto accelerators for omap5 as those have been missing. Note that there are still some pending driver related patches to use IPU and DSP related features with mainline kernel, but those are independent of the devicetree changes. Then there is a display related change for am57xx-idk for tc358778 bridge, and a change to configure the missing clock source for some PWM timers. * tag 'omap-for-v5.8/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (26 commits) ARM: OMAP5: Make L4SEC clock domain SWSUP only ARM: OMAP4: Make L4SEC clock domain SWSUP only ARM: dts: omap5: add DES crypto accelerator node ARM: dts: omap5: add SHA crypto accelerator node ARM: dts: omap5: add aes2 entry ARM: dts: omap5: add aes1 entry ARM: dts: dra7-ipu-dsp-common: Add watchdog timers to IPU and DSP nodes ARM: dts: am571x-idk: Add CMA pools and enable IPUs & DSP1 rprocs ARM: dts: am572x-idk-common: Add CMA pools and enable IPU & DSP rprocs ARM: dts: beagle-x15-common: Add CMA pools and enable IPU & DSP rprocs ARM: dts: dra76-evm: Add CMA pools and enable IPU & DSP rprocs ARM: dts: dra71-evm: Add CMA pools and enable IPUs & DSP1 rprocs ARM: dts: dra72-evm-revc: Add CMA pools and enable IPUs & DSP1 rprocs ARM: dts: dra72-evm: Add CMA pools and enable IPUs & DSP1 rprocs ARM: dts: dra7-evm: Add CMA pools and enable IPU & DSP rprocs ARM: dts: dra7-ipu-dsp-common: Add timers to IPU and DSP nodes ARM: dts: dra7-ipu-dsp-common: Add mailboxes to IPU and DSP nodes ARM: dts: dra7-ipu-dsp-common: Move mailboxes into common files ARM: dts: DRA72x: Add aliases for rproc nodes ARM: dts: DRA74x: Add aliases for rproc nodes ... Link: https://lore.kernel.org/r/pull-1588873628-477615@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-05-17ARM: dts: kirkwood: Add Check Point L-50 boardPawel Dembicki1-0/+1
This patch adds dts for the Check Point L-50 from 600/1100 series routers. Specification: -CPU: Marvell Kirkwood 88F6821 1200MHz -RAM: 512MB -Flash: NAND 512MB -WiFi: mPCIe card based on Atheros AR9287 b/g/n -WAN: 1 Gigabit Port (Marvell 88E1116R PHY) -LAN: 9 Gigabit Ports (2x Marvell 88E6171(5+4)) -USB: 2x USB2.0 -Express card slot -SD card slot -Serial console: RJ-45 115200 8n1 -Unsupported DSL Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
2020-05-14ARM: dts: stm32: Split Avenger96 into DHCOR SoM and Avenger96 boardMarek Vasut1-0/+1
The Avenger96 is in fact an assembly of DH Electronics DHCOR SoM on top of an Avenger96 reference board. The DHCOR SoM can be populated with any STM32MP15xx. Split the DTs to reflect this such that the common SoM and Avenger96 parts are now in stm32mp15xx-dhcor-*dtsi and a specific example implementation of STM32MP157A SoM and Avenger96 board is separated into stm32mp157a-dhcor-*dts* . The stm32mp157a-avenger96.dts is retained for the sake of backward naming compatibility. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-14ARM: dts: stm32: Add IoT Box board supportManivannan Sadhasivam1-0/+1
IoT Box is an IoT gateway device based on Stinger96 board powered by STM32MP1 SoC, designed and manufactured by Shiratech Solutions. This device makes use of Stinger96 board by having it as a base board with one additional mezzanine on top. Following are the features exposed by this device in addition to the Stinger96 board: * WiFi/BT * CCS811 VOC sensor * 2x Digital microphones IM69D130 * 12x WS2812B LEDs Following peripherals are tested and known to work: * WiFi/BT * CCS811 More information about this device can be found in Shiratech website: https://www.shiratech-solutions.com/products/iot-box/ Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-14ARM: dts: stm32: Add Stinger96 board supportManivannan Sadhasivam1-0/+1
Stinger96 is a 96Boards IoT Extended edition board designed and manufactured by Shiratech solutions based on STM32MP1 SoC. Following are the features of this board: * 256MB DDR * 125MB NAND Flash * Onboard BG96 modem * 1x uSD * 2x USB (1 available as external connector and another connected to BG96) * 1x SPI * 1x PCM * 2x UART (apart from serial console) * 2x I2C (apart from one connected to PMIC) Following peripherals are tested and known to work: * BG96 modem * 1x I2C (LS-I2C0) * 1x SPI * 1x UART (LS-UART0) * USB (Only Gadget mode) * uSD More information about this board can be found in Shiratech website: https://www.shiratech-solutions.com/products/stinger96/ Signed-off-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-05-05ARM: dts: r8a7742-iwg21d-q7: Add iWave G21D-Q7 board based on RZ/G1HLad Prabhakar1-0/+1
Add support for iWave RainboW-G21D-Qseven board based on RZ/G1H. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com> Link: https://lore.kernel.org/r/1588542414-14826-11-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2020-05-05ARM: dts: aspeed: Adding Facebook Yosemite V2 BMCManikandan Elumalai1-0/+1
The Yosemite V2 is a facebook multi-node server platform that host four OCP server. The BMC in the Yosemite V2 platform based on AST2500 SoC. This patch adds linux device tree entry related to Yosemite V2 specific devices connected to BMC SoC. Signed-off-by: Manikandan Elumalai <manikandan.hcl.ers.epl@gmail.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Vijay Khemka <vkhemka@fb.com> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-05-05ARM: dts: aspeed: Add YADRO Nicole BMCAlexander Filippov1-0/+1
Nicole is an OpenPower machine with an Aspeed 2500 BMC SoC manufactured by YADRO. Signed-off-by: Alexander Filippov <a.filippov@yadro.com> Acked-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Patrick Williams <patrick@stwcx.xyz> Signed-off-by: Joel Stanley <joel@jms.id.au>
2020-04-28ARM: dts: Add devicetree for Integrator/AP with IM-PD1Linus Walleij1-0/+1
This adds a device tree for the Integrator/AP with the IM-PD1 logic module mounted, using the new logic module bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-04-21ARM: dts: am5729: beaglebone-ai: adding device treeJason Kridner1-0/+1
BeagleBoard.org BeagleBone AI is an open source hardware single board computer based on the Texas Instruments AM5729 SoC featuring dual-core 1.5GHz Arm Cortex-A15 processor, dual-core C66 digital signal processor (DSP), quad-core embedded vision engine (EVE), Arm Cortex-M4 processors, dual programmable realtime unit industrial control subsystems and more. The board features 1GB DDR3L, USB3.0 Type-C, USB HS Type-A, microHDMI, 16GB eMMC flash, 1G Ethernet, 802.11ac 2/5GHz, Bluetooth, and BeagleBone expansion headers. For more information, refer to: https://beaglebone.ai This patch introduces the BeagleBone AI device tree. Note that the device use the "ti,tpd12s016" component which is software compatible with "ti,tpd12s015". Thus we only use the latter driver. Signed-off-by: Jason Kridner <jdk@ti.com> Signed-off-by: Caleb Robey <c-robey@ti.com> Signed-off-by: Drew Fustini <drew@beagleboard.org> Cc: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2020-04-20ARM: dts: stm32: add STM32MP1-based Linux Automation MC-1 boardAhmad Fatoum1-1/+2
The Linux Automation MC-1 is a SBC built around the Octavo Systems OSD32MP15x SiP. The SiP features up to 1 GB DDR3 RAM, EEPROM and a PMIC. The board has eMMC and a SD slot for storage and GbE for both connectivity and power. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2020-04-14ARM: dts: colibri: introduce device trees with UHS-I supportIgor Opaniuk1-0/+1
1. Introduce dtsi with overlay configuration for enabling UHS-I for Colibri iMX6S/DL V1.1x re-design. 2. Introduce new dts for the Colibri iMX6S/DL V1.1x on Colibri Evaluation Carrier Board V3.x. However, disable 1.8V for the Colibri Evaluation Board since this carrier board has 3.3V pull-ups on. 3. Provide proper configuration for VGEN3, which allows that rail to be automatically switched to 1.8 volts for proper UHS-I operation mode. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2020-04-14ARM: dts: sun7i: Add A20-OLinuXino-LIME-eMMCStefan Mavrodiev1-0/+1
There is new version of A20-OLinuXino-LIME with eMMC storage. The card routing is the same as in A20-OLinuXino-LIME2-eMMC, so this is basically copy/paste. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2020-04-13ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICPCristian Birsan1-0/+1
This is the addition of the new SAMA5D2 Industrial Connectivity Platform(ICP). Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> Link: https://lore.kernel.org/r/20200410164320.7658-3-cristian.birsan@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2020-04-13ARM: dts: exynos: Add devicetree file for the Galaxy S2Stenkin Evgeniy1-0/+1
Add devicetree file for the Exynos4210 based Galaxy S2 (GT-I9100 version). Signed-off-by: Stenkin Evgeniy <stenkinevgeniy@gmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-04-12ARM: dts: rtd1195: Add Realtek Horseradish EVBAndreas Färber1-0/+1
Add a Device Tree for Realtek's RTD1195 EVB "Horseradish". Signed-off-by: Andreas Färber <afaerber@suse.de>
2020-04-12ARM: dts: Prepare Realtek RTD1195 and MeLE X1000Andreas Färber1-0/+2
Add Device Trees for Realtek RTD1195 SoC and MeLE X1000 TV box. Reuse the existing RTD1295 watchdog compatible for now. Reviewed-by: Rob Herring <robh@kernel.org> [AF: Fixed r-bus size, fixed GIC, updated memreserve & memory] Signed-off-by: Andreas Färber <afaerber@suse.de>
2020-03-25Merge tag 'imx-dt-5.7' of ↵Arnd Bergmann1-0/+14
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX arm DTS changes for 5.7: - New support for i.MX6/7 based PICO devices and Toradex i.MX7 based Aster boards. - Add voltage monitor device node for vf610-zii boards. - Improve UART pins macro defines for i.MX6SX SoC and switch related boards to use the new names. - Use generic node name for devices like GPT, KPP, CCM, WDOG, OCOTP and IOMUXC in i.MX DTS files. - Switch imx6ul-pico device tree to DRM bindings. - Use SPDX-License-Identifier for all Toradex i.MX6/7 based boards. - Add proper rgmii PHY description for imx6dl-riotboard and imx6q-marsboard. - Add capture-subsystem device support for i.MX51. - Kill off "simple-panel" compatibles which has never been an accepted as an upstream compatible string. - Random device addition to various boards. * tag 'imx-dt-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (55 commits) ARM: dts: imx6q-marsboard: properly define rgmii PHY ARM: dts: imx6dl-riotboard: properly define rgmii PHY ARM: dts: imx51-zii-rdu1: set name prefix for TPA6130A2 ARM: dts: imx6: RDU2: assign video PLL as input to LDB ARM: dts: vf: toradex: SPDX tags and copyright cleanup ARM: dts: imx7: toradex: use SPDX-License-Identifier ARM: dts: imx6: toradex: use SPDX-License-Identifier ARM: dts: imx51: add capture-subsystem device ARM: dts: imx: add nvmem property for cpu0 ARM: dts: imx6qdl: Add imx6qdl-pico support ARM: dts: imx6ul-pico: Add support for the dwarf baseboard ARM: dts: imx7d-pico: Add support for the nymph baseboard ARM: dts: imx7d-pico: Add support for the dwarf baseboard ARM: dts: imx23: introduce mmc0_sck_cfg ARM: dts: imx25-pinfunc: add config for kpp rows 4 to 7 ARM: dts: imx: align name for crypto node and child nodes ARM: dts: imx6qdl-gw5910: add CC1352 UART ARM: dts: imx6qdl-sr-som-ti: indicate powering off wifi is safe ARM: dts: imx6: phycore-som: add da9062 gpio support ARM: dts: imx6: phycore-som: explicit disable pmic watchdog during suspend ... Link: https://lore.kernel.org/r/20200318051918.32579-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'ux500-dts-v5.7' of ↵Arnd Bergmann1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into arm/dt Ux500 DTS updates for the v5.7 kernel: - Fix some DSI nodes - Add GT-S7710 DTS file * tag 'ux500-dts-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson: ARM: dts: Add devicetree for Samsung GT-S7710 ARM: dts: ux500: Fix up DSI controller nodes Link: https://lore.kernel.org/r/CACRpkdb8T9CZYvYEFYnQTOMoXGsn43N8TgKfvoJZjTwRHW6zhQ@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-03-25Merge tag 'stm32-dt-for-v5.7-1' of ↵Arnd Bergmann1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt STM32 DT updates for v5.3, round 1 Highlights: ---------- - Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. It is based on stm32mp157c SoC. - Add OTG full support on stm32mp15. - Fix issues seen during yaml validation on stpmic and stmfx. - Add i2c power/wakeup support on stm32mp15. - Add card detect on sdcard on stm32mp boards * tag 'stm32-dt-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (25 commits) ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1 ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1 ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1 ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1 ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board ARM: dts: stm32: Correct stmfx node name on stm32746g-eval board ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151 ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1 ARM: dts: stm32: add USB OTG pinctrl to stm32mp15 ARM: dts: stm32: add USB OTG full support on stm32mp151 ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board ... Link: https://lore.kernel.org/r/ded09d01-df47-9572-4679-34669bff8916@st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 21:15:33 +0000