summaryrefslogtreecommitdiff
path: root/Documentation/virtual
AgeCommit message (Collapse)AuthorFilesLines
2013-05-05Merge tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds4-6/+260
Pull kvm updates from Gleb Natapov: "Highlights of the updates are: general: - new emulated device API - legacy device assignment is now optional - irqfd interface is more generic and can be shared between arches x86: - VMCS shadow support and other nested VMX improvements - APIC virtualization and Posted Interrupt hardware support - Optimize mmio spte zapping ppc: - BookE: in-kernel MPIC emulation with irqfd support - Book3S: in-kernel XICS emulation (incomplete) - Book3S: HV: migration fixes - BookE: more debug support preparation - BookE: e6500 support ARM: - reworking of Hyp idmaps s390: - ioeventfd for virtio-ccw And many other bug fixes, cleanups and improvements" * tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits) kvm: Add compat_ioctl for device control API KVM: x86: Account for failing enable_irq_window for NMI window request KVM: PPC: Book3S: Add API for in-kernel XICS emulation kvm/ppc/mpic: fix missing unlock in set_base_addr() kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write kvm/ppc/mpic: remove users kvm/ppc/mpic: fix mmio region lists when multiple guests used kvm/ppc/mpic: remove default routes from documentation kvm: KVM_CAP_IOMMU only available with device assignment ARM: KVM: iterate over all CPUs for CPU compatibility check KVM: ARM: Fix spelling in error message ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally KVM: ARM: Fix API documentation for ONE_REG encoding ARM: KVM: promote vfp_host pointer to generic host cpu context ARM: KVM: add architecture specific hook for capabilities ARM: KVM: perform HYP initilization for hotplugged CPUs ARM: KVM: switch to a dual-step HYP init code ARM: KVM: rework HYP page table freeing ARM: KVM: enforce maximum size for identity mapped code ARM: KVM: move to a KVM provided HYP idmap ...
2013-05-03Merge branch 'kvm-arm-for-3.10' of git://github.com/columbia/linux-kvm-arm ↵Marcelo Tosatti1-6/+6
into queue * 'kvm-arm-for-3.10' of git://github.com/columbia/linux-kvm-arm: ARM: KVM: iterate over all CPUs for CPU compatibility check KVM: ARM: Fix spelling in error message ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally KVM: ARM: Fix API documentation for ONE_REG encoding ARM: KVM: promote vfp_host pointer to generic host cpu context ARM: KVM: add architecture specific hook for capabilities ARM: KVM: perform HYP initilization for hotplugged CPUs ARM: KVM: switch to a dual-step HYP init code ARM: KVM: rework HYP page table freeing ARM: KVM: enforce maximum size for identity mapped code ARM: KVM: move to a KVM provided HYP idmap ARM: KVM: fix HYP mapping limitations around zero ARM: KVM: simplify HYP mapping population ARM: KVM: arch_timer: use symbolic constants ARM: KVM: add support for minimal host vs guest profiling
2013-05-02KVM: PPC: Book3S: Add API for in-kernel XICS emulationPaul Mackerras2-0/+74
This adds the API for userspace to instantiate an XICS device in a VM and connect VCPUs to it. The API consists of a new device type for the KVM_CREATE_DEVICE ioctl, a new capability KVM_CAP_IRQ_XICS, which functions similarly to KVM_CAP_IRQ_MPIC, and the KVM_IRQ_LINE ioctl, which is used to assert and deassert interrupt inputs of the XICS. The XICS device has one attribute group, KVM_DEV_XICS_GRP_SOURCES. Each attribute within this group corresponds to the state of one interrupt source. The attribute number is the same as the interrupt source number. This does not support irq routing or irqfd yet. Signed-off-by: Paul Mackerras <paulus@samba.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-30kvm/ppc/mpic: remove default routes from documentationScott Wood1-3/+0
The default routes were removed from the code during patchset respinning, but were not removed from the documentation. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-28KVM: ARM: Fix API documentation for ONE_REG encodingChristoffer Dall1-6/+6
Unless I'm mistaken, the size field was encoded 4 bits off and a wrong value was used for 64-bit FP registers. Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-26KVM: PPC: Book3S: Facilities to save/restore XICS presentation ctrler statePaul Mackerras1-0/+1
This adds the ability for userspace to save and restore the state of the XICS interrupt presentation controllers (ICPs) via the KVM_GET/SET_ONE_REG interface. Since there is one ICP per vcpu, we simply define a new 64-bit register in the ONE_REG space for the ICP state. The state includes the CPU priority setting, the pending IPI priority, and the priority and source number of any pending external interrupt. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26KVM: PPC: Book3S: Add infrastructure to implement kernel-side RTAS callsMichael Ellerman1-0/+19
For pseries machine emulation, in order to move the interrupt controller code to the kernel, we need to intercept some RTAS calls in the kernel itself. This adds an infrastructure to allow in-kernel handlers to be registered for RTAS services by name. A new ioctl, KVM_PPC_RTAS_DEFINE_TOKEN, then allows userspace to associate token values with those service names. Then, when the guest requests an RTAS service with one of those token values, it will be handled by the relevant in-kernel handler rather than being passed up to userspace as at present. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org> [agraf: fix warning] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26KVM: PPC: Support irq routing and irqfd for in-kernel MPICAlexander Graf1-0/+19
Now that all the irq routing and irqfd pieces are generic, we can expose real irqchip support to all of KVM's internal helpers. This allows us to use irqfd with the in-kernel MPIC. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26kvm/ppc/mpic: add KVM_CAP_IRQ_MPICScott Wood1-0/+8
Enabling this capability connects the vcpu to the designated in-kernel MPIC. Using explicit connections between vcpus and irqchips allows for flexibility, but the main benefit at the moment is that it simplifies the code -- KVM doesn't need vm-global state to remember which MPIC object is associated with this vm, and it doesn't need to care about ordering between irqchip creation and vcpu creation. Signed-off-by: Scott Wood <scottwood@freescale.com> [agraf: add stub functions for kvmppc_mpic_{dis,}connect_vcpu] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26kvm/ppc/mpic: in-kernel MPIC emulationScott Wood1-0/+37
Hook the MPIC code up to the KVM interfaces, add locking, etc. Signed-off-by: Scott Wood <scottwood@freescale.com> [agraf: add stub function for kvmppc_mpic_set_epr, non-booke, 64bit] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26kvm: add device control APIScott Wood2-0/+71
Currently, devices that are emulated inside KVM are configured in a hardcoded manner based on an assumption that any given architecture only has one way to do it. If there's any need to access device state, it is done through inflexible one-purpose-only IOCTLs (e.g. KVM_GET/SET_LAPIC). Defining new IOCTLs for every little thing is cumbersome and depletes a limited numberspace. This API provides a mechanism to instantiate a device of a certain type, returning an ID that can be used to set/get attributes of the device. Attributes may include configuration parameters (e.g. register base address), device state, operational commands, etc. It is similar to the ONE_REG API, except that it acts on devices rather than vcpus. Both device types and individual attributes can be tested without having to create the device or get/set the attribute, without the need for separately managing enumerated capabilities. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26KVM: PPC: e500: Add support for EPTCFG registerMihai Caraman1-0/+1
EPTCFG register defined by E.PT is accessed unconditionally by Linux guests in the presence of MAV 2.0. Emulate it now. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26KVM: PPC: e500: Add support for TLBnPS registersMihai Caraman1-0/+4
Add support for TLBnPS registers available in MMU Architecture Version (MAV) 2.0. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26KVM: PPC: e500: Expose MMU registers via ONE_REGMihai Caraman1-0/+11
MMU registers were exposed to user-space using sregs interface. Add them to ONE_REG interface using kvmppc_get_one_reg/kvmppc_set_one_reg delegation mechanism. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-22KVM: PPC: Added one_reg interface for timer registersBharat Bhushan1-0/+4
If userspace wants to change some specific bits of TSR (timer status register) then it uses GET/SET_SREGS ioctl interface. So the steps will be: i) user-space will make get ioctl, ii) change TSR in userspace iii) then make set ioctl. It can happen that TSR gets changed by kernel after step i) and before step iii). To avoid this we have added below one_reg ioctls for oring and clearing specific bits in TSR. This patch adds one registerface for: 1) setting specific bit in TSR (timer status register) 2) clearing specific bit in TSR (timer status register) 3) setting/getting the TCR register. There are cases where we want to only change TCR and not TSR. Although we can uses SREGS without KVM_SREGS_E_UPDATE_TSR flag but I think one reg is better. I am open if someone feels we should use SREGS only here. 4) getting/setting TSR register Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-12Remove Documentation/virtual/virtio-spec.txtRusty Russell2-3213/+0
We haven't been keeping it in sync, so just remove it. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2013-03-05KVM: ioeventfd for virtio-ccw devices.Cornelia Huck1-0/+8
Enhance KVM_IOEVENTFD with a new flag that allows to attach to virtio-ccw devices on s390 via the KVM_VIRTIO_CCW_NOTIFY_BUS. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-02-24Merge tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-30/+85
Pull KVM updates from Marcelo Tosatti: "KVM updates for the 3.9 merge window, including x86 real mode emulation fixes, stronger memory slot interface restrictions, mmu_lock spinlock hold time reduction, improved handling of large page faults on shadow, initial APICv HW acceleration support, s390 channel IO based virtio, amongst others" * tag 'kvm-3.9-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (143 commits) Revert "KVM: MMU: lazily drop large spte" x86: pvclock kvm: align allocation size to page size KVM: nVMX: Remove redundant get_vmcs12 from nested_vmx_exit_handled_msr x86 emulator: fix parity calculation for AAD instruction KVM: PPC: BookE: Handle alignment interrupts booke: Added DBCR4 SPR number KVM: PPC: booke: Allow multiple exception types KVM: PPC: booke: use vcpu reference from thread_struct KVM: Remove user_alloc from struct kvm_memory_slot KVM: VMX: disable apicv by default KVM: s390: Fix handling of iscs. KVM: MMU: cleanup __direct_map KVM: MMU: remove pt_access in mmu_set_spte KVM: MMU: cleanup mapping-level KVM: MMU: lazily drop large spte KVM: VMX: cleanup vmx_set_cr0(). KVM: VMX: add missing exit names to VMX_EXIT_REASONS array KVM: VMX: disable SMEP feature when guest is in non-paging mode KVM: Remove duplicate text in api.txt Revert "KVM: MMU: split kvm_mmu_free_page" ...
2013-02-11ARM: KVM: VGIC accept vcpu and dist base addresses from user spaceChristoffer Dall1-0/+1
User space defines the model to emulate to a guest and should therefore decide which addresses are used for both the virtual CPU interface directly mapped in the guest physical address space and for the emulated distributor interface, which is mapped in software by the in-kernel VGIC support. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-11KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR ioctlChristoffer Dall1-0/+37
On ARM some bits are specific to the model being emulated for the guest and user space needs a way to tell the kernel about those bits. An example is mmio device base addresses, where KVM must know the base address for a given device to properly emulate mmio accesses within a certain address range or directly map a device with virtualiation extensions into the guest address space. We make this API ARM-specific as we haven't yet reached a consensus for a generic API for all KVM architectures that will allow us to do something like this. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2013-02-05KVM: Remove duplicate text in api.txtGeoff Levand1-13/+0
Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-02-04KVM: set_memory_region: Disallow changing read-only attribute laterTakuya Yoshikawa1-6/+6
As Xiao pointed out, there are a few problems with it: - kvm_arch_commit_memory_region() write protects the memory slot only for GET_DIRTY_LOG when modifying the flags. - FNAME(sync_page) uses the old spte value to set a new one without checking KVM_MEM_READONLY flag. Since we flush all shadow pages when creating a new slot, the simplest fix is to disallow such problematic flag changes: this is safe because no one is doing such things. Reviewed-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com> Cc: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-23KVM: ARM: Power State Coordination Interface implementationMarc Zyngier1-0/+4
Implement the PSCI specification (ARM DEN 0022A) to control virtual CPUs being "powered" on or off. PSCI/KVM is detected using the KVM_CAP_ARM_PSCI capability. A virtual CPU can now be initialized in a "powered off" state, using the KVM_ARM_VCPU_POWER_OFF feature flag. The guest can use either SMC or HVC to execute a PSCI function. Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-23KVM: ARM: VFP userspace interfaceRusty Russell1-0/+6
We use space #18 for floating point regs. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-23KVM: ARM: Demux CCSIDR in the userspace APIChristoffer Dall1-0/+2
The Cache Size Selection Register (CSSELR) selects the current Cache Size ID Register (CCSIDR). You write which cache you are interested in to CSSELR, and read the information out of CCSIDR. Which cache numbers are valid is known by reading the Cache Level ID Register (CLIDR). To export this state to userspace, we add a KVM_REG_ARM_DEMUX numberspace (17), which uses 8 bits to represent which register is being demultiplexed (0 for CCSIDR), and the lower 8 bits to represent this demultiplexing (in our case, the CSSELR value, which is 4 bits). Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-23KVM: ARM: User space API for getting/setting co-proc registersChristoffer Dall1-0/+5
The following three ioctls are implemented: - KVM_GET_REG_LIST - KVM_GET_ONE_REG - KVM_SET_ONE_REG Now we have a table for all the cp15 registers, we can drive a generic API. The register IDs carry the following encoding: ARM registers are mapped using the lower 32 bits. The upper 16 of that is the register group type, or coprocessor number: ARM 32-bit CP15 registers have the following id bit patterns: 0x4002 0000 000F <zero:1> <crn:4> <crm:4> <opc1:4> <opc2:3> ARM 64-bit CP15 registers have the following id bit patterns: 0x4003 0000 000F <zero:1> <zero:4> <crm:4> <opc1:4> <zero:3> For futureproofing, we need to tell QEMU about the CP15 registers the host lets the guest access. It will need this information to restore a current guest on a future CPU or perhaps a future KVM which allow some of these to be changed. We use a separate table for these, as they're only for the userspace API. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-23KVM: ARM: Inject IRQs and FIQs from userspaceChristoffer Dall1-4/+21
All interrupt injection is now based on the VM ioctl KVM_IRQ_LINE. This works semantically well for the GIC as we in fact raise/lower a line on a machine component (the gic). The IOCTL uses the follwing struct. struct kvm_irq_level { union { __u32 irq; /* GSI */ __s32 status; /* not used for KVM_IRQ_LEVEL */ }; __u32 level; /* 0 or 1 */ }; ARM can signal an interrupt either at the CPU level, or at the in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to use PPIs designated for specific cpus. The irq field is interpreted like this:  bits: | 31 ... 24 | 23 ... 16 | 15 ... 0 | field: | irq_type | vcpu_index | irq_number | The irq_type field has the following values: - irq_type[0]: out-of-kernel GIC: irq_number 0 is IRQ, irq_number 1 is FIQ - irq_type[1]: in-kernel GIC: SPI, irq_number between 32 and 1019 (incl.) (the vcpu_index field is ignored) - irq_type[2]: in-kernel GIC: PPI, irq_number between 16 and 31 (incl.) The irq_number thus corresponds to the irq ID in as in the GICv2 specs. This is documented in Documentation/kvm/api.txt. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-23KVM: ARM: Initial skeleton to compile KVM supportChristoffer Dall1-4/+53
Targets KVM support for Cortex A-15 processors. Contains all the framework components, make files, header files, some tracing functionality, and basic user space API. Only supported core is Cortex-A15 for now. Most functionality is in arch/arm/kvm/* or arch/arm/include/asm/kvm_*.h. Reviewed-by: Will Deacon <will.deacon@arm.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Christoffer Dall <c.dall@virtualopensystems.com>
2013-01-14KVM: Remove unused slot_bitmap from kvm_mmu_pageTakuya Yoshikawa1-7/+0
Not needed any more. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by: Gleb Natapov <gleb@redhat.com>
2013-01-10KVM: PPC: BookE: Add EPR ONE_REG syncAlexander Graf1-0/+1
We need to be able to read and write the contents of the EPR register from user space. This patch implements that logic through the ONE_REG API and declares its (never implemented) SREGS counterpart as deprecated. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10KVM: PPC: BookE: Implement EPR exitAlexander Graf1-2/+38
The External Proxy Facility in FSL BookE chips allows the interrupt controller to automatically acknowledge an interrupt as soon as a core gets its pending external interrupt delivered. Today, user space implements the interrupt controller, so we need to check on it during such a cycle. This patch implements logic for user space to enable EPR exiting, disable EPR exiting and EPR exiting itself, so that user space can acknowledge an interrupt when an external interrupt has successfully been delivered into the guest vcpu. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-10KVM: PPC: Fix SREGS documentation referenceMihai Caraman1-1/+1
Reflect the uapi folder change in SREGS API documentation. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> Reviewed-by: Amos Kong <kongjianjun@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-07KVM: s390: Add support for channel I/O instructions.Cornelia Huck1-0/+30
Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass intercepts for channel I/O instructions to userspace. Only I/O instructions interacting with I/O interrupts need to be handled in-kernel: - TEST PENDING INTERRUPTION (tpi) dequeues and stores pending interrupts entirely in-kernel. - TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel and exits via KVM_EXIT_S390_TSCH to userspace for subchannel- related processing. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-07KVM: s390: Base infrastructure for enabling capabilities.Cornelia Huck1-1/+1
Make s390 support KVM_ENABLE_CAP. Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-07KVM: s390: Add support for machine checks.Cornelia Huck1-0/+4
Add support for injecting machine checks (only repressible conditions for now). This is a bit more involved than I/O interrupts, for these reasons: - Machine checks come in both floating and cpu varieties. - We don't have a bit for machine checks enabling, but have to use a roundabout approach with trapping PSW changing instructions and watching for opened machine checks. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-01-07KVM: s390: Support for I/O interrupts.Cornelia Huck1-0/+4
Add support for handling I/O interrupts (standard, subchannel-related ones and rudimentary adapter interrupts). The subchannel-identifying parameters are encoded into the interrupt type. I/O interrupts are floating, so they can't be injected on a specific vcpu. Reviewed-by: Alexander Graf <agraf@suse.de> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-12-06KVM: PPC: booke: Get/set guest EPCR register using ONE_REG interfaceMihai Caraman1-0/+1
Implement ONE_REG interface for EPCR register adding KVM_REG_PPC_EPCR to the list of ONE_REG PPC supported registers. Signed-off-by: Mihai Caraman <mihai.caraman@freescale.com> [agraf: remove HV dependency, use get/put_user] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-12-06KVM: PPC: Book3S HV: Provide a method for userspace to read and write the HPTPaul Mackerras1-0/+54
A new ioctl, KVM_PPC_GET_HTAB_FD, returns a file descriptor. Reads on this fd return the contents of the HPT (hashed page table), writes create and/or remove entries in the HPT. There is a new capability, KVM_CAP_PPC_HTAB_FD, to indicate the presence of the ioctl. The ioctl takes an argument structure with the index of the first HPT entry to read out and a set of flags. The flags indicate whether the user is intending to read or write the HPT, and whether to return all entries or only the "bolted" entries (those with the bolted bit, 0x10, set in the first doubleword). This is intended for use in implementing qemu's savevm/loadvm and for live migration. Therefore, on reads, the first pass returns information about all HPTEs (or all bolted HPTEs). When the first pass reaches the end of the HPT, it returns from the read. Subsequent reads only return information about HPTEs that have changed since they were last read. A read that finds no changed HPTEs in the HPT following where the last read finished will return 0 bytes. The format of the data provides a simple run-length compression of the invalid entries. Each block of data starts with a header that indicates the index (position in the HPT, which is just an array), the number of valid entries starting at that index (may be zero), and the number of invalid entries following those valid entries. The valid entries, 16 bytes each, follow the header. The invalid entries are not explicitly represented. Signed-off-by: Paul Mackerras <paulus@samba.org> [agraf: fix documentation] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-31Merge commit 'origin/queue' into for-queueAlexander Graf1-1/+1
Conflicts: arch/powerpc/include/asm/Kbuild arch/powerpc/include/uapi/asm/Kbuild
2012-10-30KVM: Documentation: Fix reentry-to-be-consistent paragraphAlexander Graf1-1/+2
All user space offloaded instruction emulation needs to reenter kvm to produce consistent state again. Fix the section in the documentation to mention all of them. Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-29Merge remote-tracking branch 'master' into queueMarcelo Tosatti1-1/+1
Merge reason: development work has dependency on kvm patches merged upstream. Conflicts: arch/powerpc/include/asm/Kbuild arch/powerpc/include/asm/kvm_para.h Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-10-10Merge branch 'for-upstream' of http://github.com/agraf/linux-2.6 into queueMarcelo Tosatti1-4/+45
* 'for-upstream' of http://github.com/agraf/linux-2.6: (56 commits) arch/powerpc/kvm/e500_tlb.c: fix error return code KVM: PPC: Book3S HV: Provide a way for userspace to get/set per-vCPU areas KVM: PPC: Book3S: Get/set guest FP regs using the GET/SET_ONE_REG interface KVM: PPC: Book3S: Get/set guest SPRs using the GET/SET_ONE_REG interface KVM: PPC: set IN_GUEST_MODE before checking requests KVM: PPC: e500: MMU API: fix leak of shared_tlb_pages KVM: PPC: e500: fix allocation size error on g2h_tlb1_map KVM: PPC: Book3S HV: Fix calculation of guest phys address for MMIO emulation KVM: PPC: Book3S HV: Remove bogus update of physical thread IDs KVM: PPC: Book3S HV: Fix updates of vcpu->cpu KVM: Move some PPC ioctl definitions to the correct place KVM: PPC: Book3S HV: Handle memory slot deletion and modification correctly KVM: PPC: Move kvm->arch.slot_phys into memslot.arch KVM: PPC: Book3S HV: Take the SRCU read lock before looking up memslots KVM: PPC: bookehv: Allow duplicate calls of DO_KVM macro KVM: PPC: BookE: Support FPU on non-hv systems KVM: PPC: 440: Implement mfdcrx KVM: PPC: 440: Implement mtdcrx Document IACx/DACx registers access using ONE_REG API KVM: PPC: E500: Remove E500_TLB_DIRTY flag ...
2012-10-10s390/kvm: Add documentation for KVM_S390_INTERRUPTCornelia Huck1-0/+33
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2012-10-10Merge branch 'for-linus-37rc1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml Pull UML changes from Richard Weinberger: "UML receives this time only cleanups. The most outstanding change is the 'include "foo.h"' do 'include <foo.h>' conversion done by Al Viro. It touches many files, that's why the diffstat is rather big." * 'for-linus-37rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: typo in UserModeLinux-HOWTO hppfs: fix the return value of get_inode() hostfs: drop vmtruncate um: get rid of pointless include "..." where include <...> will do um: move sysrq.h out of include/shared um/x86: merge 32 and 64 bit variants of ptrace.h um/x86: merge 32 and 64bit variants of checksum.h
2012-10-09typo in UserModeLinux-HOWTORichard Genoud1-1/+1
[it seems that I sent it to the wrong maintainer at first... sorry for that] copy_from_user was meant instead of copy_to_user. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2012-10-05KVM: PPC: Book3S HV: Provide a way for userspace to get/set per-vCPU areasPaul Mackerras1-0/+3
The PAPR paravirtualization interface lets guests register three different types of per-vCPU buffer areas in its memory for communication with the hypervisor. These are called virtual processor areas (VPAs). Currently the hypercalls to register and unregister VPAs are handled by KVM in the kernel, and userspace has no way to know about or save and restore these registrations across a migration. This adds "register" codes for these three areas that userspace can use with the KVM_GET/SET_ONE_REG ioctls to see what addresses have been registered, and to register or unregister them. This will be needed for guest hibernation and migration, and is also needed so that userspace can unregister them on reset (otherwise we corrupt guest memory after reboot by writing to the VPAs registered by the previous kernel). The "register" for the VPA is a 64-bit value containing the address, since the length of the VPA is fixed. The "registers" for the SLB shadow buffer and dispatch trace log (DTL) are 128 bits long, consisting of the guest physical address in the high (first) 64 bits and the length in the low 64 bits. This also fixes a bug where we were calling init_vpa unconditionally, leading to an oops when unregistering the VPA. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05KVM: PPC: Book3S: Get/set guest FP regs using the GET/SET_ONE_REG interfacePaul Mackerras1-0/+11
This enables userspace to get and set all the guest floating-point state using the KVM_[GS]ET_ONE_REG ioctls. The floating-point state includes all of the traditional floating-point registers and the FPSCR (floating point status/control register), all the VMX/Altivec vector registers and the VSCR (vector status/control register), and on POWER7, the vector-scalar registers (note that each FP register is the high-order half of the corresponding VSR). Most of these are implemented in common Book 3S code, except for VSX on POWER7. Because HV and PR differ in how they store the FP and VSX registers on POWER7, the code for these cases is not common. On POWER7, the FP registers are the upper halves of the VSX registers vsr0 - vsr31. PR KVM stores vsr0 - vsr31 in two halves, with the upper halves in the arch.fpr[] array and the lower halves in the arch.vsr[] array, whereas HV KVM on POWER7 stores the whole VSX register in arch.vsr[]. Signed-off-by: Paul Mackerras <paulus@samba.org> [agraf: fix whitespace, vsx compilation] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05KVM: PPC: Book3S: Get/set guest SPRs using the GET/SET_ONE_REG interfacePaul Mackerras1-0/+19
This enables userspace to get and set various SPRs (special-purpose registers) using the KVM_[GS]ET_ONE_REG ioctls. With this, userspace can get and set all the SPRs that are part of the guest state, either through the KVM_[GS]ET_REGS ioctls, the KVM_[GS]ET_SREGS ioctls, or the KVM_[GS]ET_ONE_REG ioctls. The SPRs that are added here are: - DABR: Data address breakpoint register - DSCR: Data stream control register - PURR: Processor utilization of resources register - SPURR: Scaled PURR - DAR: Data address register - DSISR: Data storage interrupt status register - AMR: Authority mask register - UAMOR: User authority mask override register - MMCR0, MMCR1, MMCRA: Performance monitor unit control registers - PMC1..PMC8: Performance monitor unit counter registers In order to reduce code duplication between PR and HV KVM code, this moves the kvm_vcpu_ioctl_[gs]et_one_reg functions into book3s.c and centralizes the copying between user and kernel space there. The registers that are handled differently between PR and HV, and those that exist only in one flavor, are handled in kvmppc_[gs]et_one_reg() functions that are specific to each flavor. Signed-off-by: Paul Mackerras <paulus@samba.org> [agraf: minimal style fixes] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05Document IACx/DACx registers access using ONE_REG APIBharat Bhushan1-2/+7
Patch to access the debug registers (IACx/DACx) using ONE_REG api was sent earlier. But that missed the respective documentation. Also corrected the index number referencing in section 4.69 Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-10-05KVM: PPC: Add support for ePAPR idle hcall in host kernelLiu Yu-B132011-2/+5
And add a new flag definition in kvm_ppc_pvinfo to indicate whether the host supports the EV_IDLE hcall. Signed-off-by: Liu Yu <yu.liu@freescale.com> [stuart.yoder@freescale.com: cleanup,fixes for conditions allowing idle] Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com> [agraf: fix typo] Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 20:57:50 +0000