| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
There is a group of PHY chips supporting BroadR-Reach link modes in
a manner allowing for more or less identical register usage as standard
Clause 22 PHY.
These chips support standard Ethernet link modes as well, however, the
circuitry is mutually exclusive and cannot be auto-detected.
The link modes in question are 100Base-T1 as defined in IEEE802.3bw,
based on Broadcom's 1BR-100 link mode, and newly defined 10Base-T1BRR
(1BR-10 in Broadcom documents).
Add optional brr-mode flag to switch the PHY to BroadR-Reach mode.
Signed-off-by: Kamil Horák (2N) <kamilh@axis.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240712150709.3134474-4-kamilh@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce device-tree binding documentation for Airoha EN7581 ethernet
mac controller.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/7dfecf8aa4e6519562a94455b95c49e1b3c858a0.1720818878.git.lorenzo@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
Most likely the last "new features" pull request for v6.11 with
changes both in stack and in drivers. The big thing is the multiple
radios for wiphy feature which makes it possible to better advertise
radio capabilities to user space. mt76 enabled MLO and iwlwifi
re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support.
Major changes:
cfg80211/mac80211
* remove DEAUTH_NEED_MGD_TX_PREP flag
* multiple radios per wiphy support
mac80211_hwsim
* multi-radio wiphy support
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
iwlwifi
* mvm: re-enable Multi-Link Operation (MLO)
* aggregation (A-MSDU) optimisations
rtw89
* preparation for RTL8852BE-VT support
* WoWLAN support for WiFi 6 chips
* 36-bit PCI DMA support
mt76
* mt7925 Multi-Link Operation (MLO) support
* tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (204 commits)
wifi: mac80211: fix AP chandef capturing in CSA
wifi: iwlwifi: correctly reference TSO page information
wifi: mt76: mt792x: fix scheduler interference in drv own process
wifi: mt76: mt7925: enabling MLO when the firmware supports it
wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_info
wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLO
wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLO
wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLO
wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctx
wifi: mt76: add def_wcid to struct mt76_wcid
wifi: mt76: mt7925: report link information in rx status
wifi: mt76: mt7925: update rate index according to link id
wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change
...
====================
Link: https://patch.msgid.link/20240711102353.0C849C116B1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert enetc device binding file to yaml. Split to 3 yaml files,
'fsl,enetc.yaml', 'fsl,enetc-mdio.yaml', 'fsl,enetc-ierb.yaml'.
Additional Changes:
- Add pci<vendor id>,<production id> in compatible string.
- Ref to common ethernet-controller.yaml and mdio.yaml.
- Add Wei fang, Vladimir and Claudiu as maintainer.
- Update ENETC description.
- Remove fixed-link part.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240709214841.570154-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The RTL8211F PHY does support LED configuration, document support
for LEDs in the binding document.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240708211649.165793-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ptimer-handle property to link to ptp-timer node handle.
Fix below warning:
arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dtb: fman@1a00000: 'ptimer-handle' do not match any of the regexes: '^ethernet@[a-f0-9]+$', '^mdio@[a-f0-9]+$', '^muram@[a-f0-9]+$', '^phc@[a-f0-9]+$', '^port@[a-f0-9]+$', 'pinctrl-[0-9]+'
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240708180949.1898495-2-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add dma-coherent property to fix below warning.
arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dtb: fman@1a00000: 'dma-coherent', 'ptimer-handle' do not match any of the regexes: '^ethernet@[a-f0-9]+$', '^mdio@[a-f0-9]+$', '^muram@[a-f0-9]+$', '^phc@[a-f0-9]+$', '^port@[a-f0-9]+$', 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/net/fsl,fman.yaml#
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20240708180949.1898495-1-Frank.Li@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Synopsys DesignWare XPCS IP-core is a Physical Coding Sublayer (PCS) layer
providing an interface between the Media Access Control (MAC) and Physical
Medium Attachment Sublayer (PMA) through a Media independent interface.
From software point of view it exposes IEEE std. Clause 45 CSR space and
can be accessible either by MDIO or MCI/APB3 bus interfaces. In the former
case the PCS device is supposed to be defined under the respective MDIO
bus DT-node. In the later case the DW xPCS will be just a normal IO
memory-mapped device.
Besides of that DW XPCS DT-nodes can have an interrupt signal and clock
source properties specified. The former one indicates the Clause 73/37
auto-negotiation events like: negotiation page received, AN is completed
or incompatible link partner. The clock DT-properties can describe up to
three clock sources: peripheral bus clock source, internal reference clock
and the externally connected reference clock.
Finally the DW XPCS IP-core can be optionally synthesized with a
vendor-specific interface connected to the Synopsys PMA (also called
DesignWare Consumer/Enterprise PHY). Alas that isn't auto-detectable in a
portable way. So if the DW XPCS device has the respective PMA attached
then it should be reflected in the DT-node compatible string so the driver
would be aware of the PMA-specific device capabilities (mainly connected
with CSRs available for the fine-tunings).
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convention is DT schemas should define all properties at the top-level
and not inside of if/then schemas. That minimizes the if/then schemas
and is more future proof.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://patch.msgid.link/20240703195827.1670594-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
ath.git patches for v6.11
We have moved to a new group-managed repo, and this is the first pull
request from that repo, and from me. Fingers crossed...
We have some new features in ath12k along with some cleanups in ath11k
and ath12k. Also notable are some device-tree changes to allow certain
ath11k and ath12k devices to work with a new power sequencing
subsystem.
Major changes:
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
|
|
Indeed the maximum DMA burst length can be programmed not only for DW
xGMACs, Allwinner EMACs and Spear SoC GMAC, but in accordance with
[1, 2, 3] for Generic DW *MAC IP-cores. Moreover the STMMAC driver parses
the property and then apply the configuration for all supported DW MAC
devices. All of that makes the property being available for all IP-cores
the bindings supports. Let's make sure the PBL-related properties are
validated for all of them by the common DW *MAC DT schema.
[1] DesignWare Cores Ethernet MAC Universal Databook, Revision 3.73a,
October 2013, p.378.
[2] DesignWare Cores Ethernet Quality-of-Service Databook, Revision 5.10a,
December 2017, p.1223.
[3] DesignWare Cores XGMAC - 10G Ethernet MAC Databook, Revision 2.11a,
September 2015, p.469-473.
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240628154515.8783-1-fancer.lancer@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Extract known PHY IDs from Linux kernel realtek PHY driver
and convert them into supported compatible string list for
this DT binding document.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
e3f02f32a050 ("ionic: fix kernel panic due to multi-buffer handling")
d9c04209990b ("ionic: Mark error paths in the data path as unlikely")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
New STM32 SOC have 2 GMACs instances.
GMAC IP version is SNPS 5.30
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update the mt7530 binding with some minor updates that make the document
easier to read.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240624211858.1990601-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
WOL modes such as magic-packet should be an OS policy.
By default, advertise supported modes and use ethtool to activate
the required mode.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
IEEE1588(ptp) is optional feature for network. Remove it from required
list to fix below CHECK_DTBS warning.
arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dtb: ethernet@f0000: 'ptp-timer' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-06-21
The first 2 patches are by Andy Shevchenko, one cleans up the includes
in the mcp251x driver, the other one updates the sja100 plx_pci driver
to make use of predefines PCI subvendor ID.
Mans Rullgard's patch cleans up the Kconfig help text of for the slcan
driver.
Oliver Hartkopp provides a patch to update the documentation, which
removes the ISO 15675-2 specification version where possible.
The next 2 patches are by Harini T and update the documentation of the
xilinx_can driver.
Francesco Valla provides documentation for the ISO 15765-2 protocol.
A patch by Dr. David Alan Gilbert removes an unused struct from the
mscan driver.
12 patches are by Martin Jocic. The first three add support for 3 new
devices to the kvaser_usb driver. The remaining 9 first clean up the
kvaser_pciefd driver, and then add support for MSI.
Krzysztof Kozlowski contributes 3 patches simplifies the CAN SPI
drivers by making use of spi_get_device_match_data().
The last patch is by Martin Hundebøll, which reworks the m_can driver
to not enable the CAN transceiver during probe.
* tag 'linux-can-next-for-6.11-20240621' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (24 commits)
can: m_can: don't enable transceiver when probing
can: mcp251xfd: simplify with spi_get_device_match_data()
can: mcp251x: simplify with spi_get_device_match_data()
can: hi311x: simplify with spi_get_device_match_data()
can: kvaser_pciefd: Add MSI interrupts
can: kvaser_pciefd: Move reset of DMA RX buffers to the end of the ISR
can: kvaser_pciefd: Change name of return code variable
can: kvaser_pciefd: Rename board_irq to pci_irq
can: kvaser_pciefd: Add unlikely
can: kvaser_pciefd: Add inline
can: kvaser_pciefd: Remove unnecessary comment
can: kvaser_pciefd: Skip redundant NULL pointer check in ISR
can: kvaser_pciefd: Group #defines together
can: kvaser_usb: Add support for Kvaser Mini PCIe 1xCAN
can: kvaser_usb: Add support for Kvaser USBcan Pro 5xCAN
can: kvaser_usb: Add support for Vining 800
can: mscan: remove unused struct 'mscan_state'
Documentation: networking: document ISO 15765-2
can: xilinx_can: Document driver description to list all supported IPs
can: isotp: remove ISO 15675-2 specification version where possible
...
====================
Link: https://patch.msgid.link/20240621080201.305471-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add the (optional) resets property.
The mscc-miim device is impacted by the switch reset especially when the
mscc-miim device is used as part of the LAN966x PCI device.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The last real user nSIM_700 of the "snps,arc-emac" compatible string in
a driver was removed in 2019. The use of this string in the combined DT of
rk3066a/rk3188 as place holder has also been replaced, so
remove arc_emac.txt
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert fsl-fman from txt to yaml format and split it fsl,fman.yam,
fsl,fman-port.yaml, fsl-muram.yaml, fsl-mdio.yaml.
Addition changes:
fsl,fman.yaml:
- Fixed interrupts in example.
- Fixed ethernet@e8000 miss } in example.
- ptp-timer add label in example.
- Ref to new fsl,fman*.yaml.
- Reorder property in example.
- Keep only one example.
- Add const for #address-cells and #size-cells.
- Use defined interrupt type.
- ptp example use node name phc.
fsl,fman-port:
- Keep only one example.
fsl,fman-mdio:
- Add little-endian property.
- Add ref to mdio.yaml.
- Remove suppress-preamble.
- Add #address-cells and #size-cells in example.
- Remove clock-frequency, which already describe in mmio.yaml.
fsl,muram.yaml:
- Add reg property.
- Remove range property.
- Use reg instead of range in example.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240618-ls_fman-v2-2-f00a82623d8e@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert ptp-qoirq from txt to yaml format.
Additional change:
- Fixed example interrupts proptery. Need only 1 irq by check MPC8313 spec.
- Move Reference clock context under clk,sel.
- Interrupts is not required property.
- Use low case for hex value.
- Check reference manual of MPC8313, p1010 and so on, which dts use more
than 1 irqs. Only 1 irq for each ptp device. Check driver code
(drivers/ptp/ptp_qoriq.c) and only 1 irq used. So original description is
wrong.
- Remove comments for compatible string.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240618-ls_fman-v2-1-f00a82623d8e@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
controllers are supported
Xilinx CAN binding documentation supports CAN and CANFD controllers.
Modify the title to indicate that both controllers are supported.
Signed-off-by: Harini T <harini.t@amd.com>
Link: https://lore.kernel.org/all/20240503060553.8520-2-harini.t@amd.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The IEP interrupt is used in order to support both capture events, where
an incoming external signal gets timestamped on arrival, and compare
events, where an interrupt is generated internally when the IEP counter
reaches a programmed value.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add the new interface mode 10g-qxgmii, which is similar to
usxgmii but extend to 4 channels to support maximum of 4
ports with the link speed 10M/100M/1G/2.5G.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add device-tree bindings for the ATH12K module found in the WCN7850
package.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240605122106.23818-3-brgl@bgdev.pl
|
|
Add a PCI compatible for the ATH11K module on QCA6390 and describe the
power inputs from the PMU that it consumes.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240605122106.23818-2-brgl@bgdev.pl
|
|
New STM32 SOC have 2 GMACs instances.
GMAC IP version is SNPS 4.20.
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert the lantiq,gswip bindings to YAML format.
Also add this new file to the MAINTAINERS file.
Furthermore, the CPU port has to specify a phy-mode and either a phy or
a fixed-link. Since GSWIP is connected using a SoC internal protocol
there's no PHY involved. Add phy-mode = "internal" and a fixed-link to
the example code to describe the communication between the PMAC
(Ethernet controller) and GSWIP switch.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20240611135434.3180973-2-ms@dev.tdt.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.11
The first "new features" pull request for v6.11 with changes both in
stack and in drivers. Nothing out of ordinary, except that we have
two conflicts this time:
net/mac80211/cfg.c
https://lore.kernel.org/all/20240531124415.05b25e7a@canb.auug.org.au
drivers/net/wireless/microchip/wilc1000/netdev.c
https://lore.kernel.org/all/20240603110023.23572803@canb.auug.org.au
Major changes:
cfg80211/mac80211
* parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers
wilc1000
* read MAC address during probe to make it visible to user space
iwlwifi
* bump FW API to 91 for BZ/SC devices
* report 64-bit radiotap timestamp
* enable P2P low latency by default
* handle Transmit Power Envelope (TPE) advertised by AP
* start using guard()
rtlwifi
* RTL8192DU support
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA)
support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
* tag 'wireless-next-2024-06-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (194 commits)
wifi: ath12k: add hw_link_id in ath12k_pdev
wifi: ath12k: add panic handler
wifi: rtw89: chan: Use swap() in rtw89_swap_sub_entity()
wifi: brcm80211: remove unused structs
wifi: brcm80211: use sizeof(*pointer) instead of sizeof(type)
wifi: ath12k: do not process consecutive RDDM event
dt-bindings: net: wireless: ath11k: Drop "qcom,ipq8074-wcss-pil" from example
wifi: ath12k: fix memory leak in ath12k_dp_rx_peer_frag_setup()
wifi: rtlwifi: handle return value of usb init TX/RX
wifi: rtlwifi: Enable the new rtl8192du driver
wifi: rtlwifi: Add rtl8192du/sw.c
wifi: rtlwifi: Constify rtl_hal_cfg.{ops,usb_interface_cfg} and rtl_priv.cfg
wifi: rtlwifi: Add rtl8192du/dm.{c,h}
wifi: rtlwifi: Add rtl8192du/fw.{c,h} and rtl8192du/led.{c,h}
wifi: rtlwifi: Add rtl8192du/rf.{c,h}
wifi: rtlwifi: Add rtl8192du/trx.{c,h}
wifi: rtlwifi: Add rtl8192du/phy.{c,h}
wifi: rtlwifi: Add rtl8192du/hw.{c,h}
wifi: rtlwifi: Add new members to struct rtl_priv for RTL8192DU
wifi: rtlwifi: Add rtl8192du/table.{c,h}
...
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20240607093517.41394C2BBFC@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath
ath.git patches for v6.11
ath12k
* remove unsupported tx monitor handling
* channel 2 in 6 GHz band support
* Spatial Multiplexing Power Save (SMPS) in 6 GHz band support
* multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) support
* dynamic VLAN support
* add panic handler for resetting the firmware state
ath10k
* add qcom,no-msa-ready-indicator Device Tree property
* LED support for various chipsets
|
|
This rewrites the Vitesse VSC73xx DSA switches DT binding in
schema.
It was a bit tricky since I needed to come up with some way
of applying the SPI properties only on SPI devices and not
platform devices, but I figured something out that works.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/ti/icssg/icssg_classifier.c
abd5576b9c57 ("net: ti: icssg-prueth: Add support for ICSSG switch firmware")
56a5cf538c3f ("net: ti: icssg-prueth: Fix start counter for ft1 filter")
https://lore.kernel.org/all/20240531123822.3bb7eadf@canb.auug.org.au/
No other adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add documentation for ti,pa-stats property which is syscon regmap for
PA_STATS registers. This will be used to dump statistics maintained by
ICSSG firmware.
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240529115225.630535-1-danishanwar@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convention for examples is to only show what's covered by the binding,
so drop the provider "qcom,ipq8074-wcss-pil". It is also not documented
by a schema which caused a warning.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240528134610.4075204-1-robh@kernel.org
|
|
Schema validation using rockchip,rk3308-gmac compatible fails with:
ethernet@ff4e0000: compatible: ['rockchip,rk3308-gmac'] does not contain items matching the given schema
from schema $id: http://devicetree.org/schemas/net/rockchip-dwmac.yaml#
ethernet@ff4e0000: Unevaluated properties are not allowed ('interrupt-names', 'interrupts', 'phy-mode',
'reg', 'reset-names', 'resets', 'snps,reset-active-low', 'snps,reset-delays-us',
'snps,reset-gpio' were unexpected)
from schema $id: http://devicetree.org/schemas/net/rockchip-dwmac.yaml#
Add rockchip,rk3308-gmac to snps,dwmac.yaml to fix DT schema validation.
Fixes: 2cc8c910f515 ("dt-bindings: net: rockchip-dwmac: add rk3308 gmac compatible")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240528093751.3690231-1-jonas@kwiboo.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add "clocks" bindings for the input clock.
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
constraints
The child nodes are missing "additionalProperties" constraints which
means any undocumented properties or child nodes are allowed. Add the
constraints and all the undocumented properties exposed by the fix.
Fixes: f562202fedad ("dt-bindings: net: pse-pd: Add bindings for TPS23881 PSE controller")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240523171750.2837331-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"additionalProperties" constraints
The child nodes are missing "additionalProperties" constraints which
means any undocumented properties or child nodes are allowed. Add the
constraints, and fix the fallout of wrong manager node regex and
missing properties.
Fixes: 9c1de033afad ("dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller")
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240523171732.2836880-1-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- virtio_net: fix missed error path rtnl_unlock after control queue
locking rework
Current release - new code bugs:
- bpf: fix KASAN slab-out-of-bounds in percpu_array_map_gen_lookup,
caused by missing nested map handling
- drv: dsa: correct initialization order for KSZ88x3 ports
Previous releases - regressions:
- af_packet: do not call packet_read_pending() from
tpacket_destruct_skb() fix performance regression
- ipv6: fix route deleting failure when metric equals 0, don't assume
0 means not set / default in this case
Previous releases - always broken:
- bridge: couple of syzbot-driven fixes"
* tag 'net-6.10-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits)
selftests: net: local_termination: annotate the expected failures
net: dsa: microchip: Correct initialization order for KSZ88x3 ports
MAINTAINERS: net: Update reviewers for TI's Ethernet drivers
dt-bindings: net: ti: Update maintainers list
l2tp: fix ICMP error handling for UDP-encap sockets
net: txgbe: fix to control VLAN strip
net: wangxun: match VLAN CTAG and STAG features
net: wangxun: fix to change Rx features
af_packet: do not call packet_read_pending() from tpacket_destruct_skb()
virtio_net: Fix missed rtnl_unlock
netrom: fix possible dead-lock in nr_rt_ioctl()
idpf: don't skip over ethtool tcp-data-split setting
dt-bindings: net: qcom: ethernet: Allow dma-coherent
bonding: fix oops during rmmod
net/ipv6: Fix route deleting failure when metric equals 0
selftests/net: reduce xfrm_policy test time
selftests/bpf: Adjust btf_dump test to reflect recent change in file_operations
selftests/bpf: Adjust test_access_variable_array after a kernel function name change
selftests/net/lib: no need to record ns name if it already exist
net: qrtr: ns: Fix module refcnt
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert samsung,exynos5-dp, atmel,lcdc, aspeed,ast2400-wdt bindings
to schemas
- Add bindings for Allwinner H616 NMI controller, Renesas r8a779g0
irqc, Renesas R-Car V4M TMU and CMT timers, Freescale S32G3
linflexuart, and Mediatek MT7988 XHCI
- Add 'reg' constraints on DSI and SPI display panels
- More dropping of unnecessary quotes in schemas
- Use full paths rather than relative paths in schema $refs
- Drop redundant storing of phandle for reserved memory
DT Core:
- Use scope based cleanups for kfree() and of_node_put()
- Track interrupt-map and power-supplies for fw_devlink
- Add buffer overflow check in of_modalias()
- Add and use __of_prop_free() helper for freeing struct property"
* tag 'devicetree-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (25 commits)
of: property: Add fw_devlink support for interrupt-map property
dt-bindings: display: panel: constrain 'reg' in DSI panels
dt-bindings: display: panel: constrain 'reg' in SPI panels
dt-bindings: display: samsung,ams495qa01: add missing SPI properties ref
dt-bindings: Use full path to other schemas
dt-bindings: PCI: qcom,pcie-sm8350: Drop redundant 'oneOf' sub-schema
of: module: add buffer overflow check in of_modalias()
dt-bindings: PCI: microchip: increase number of items in ranges property
dt-bindings: Drop unnecessary quotes on keys
dt-bindings: interrupt-controller: mediatek,mt6577-sysirq: Drop unnecessary quotes
of: property: Use scope based cleanup on port_node
of: reserved_mem: Remove the use of phandle from the reserved_mem APIs
of: property: fw_devlink: Add support for "power-supplies" binding
dt-bindings: watchdog: aspeed,ast2400-wdt: Convert to DT schema
dt-bindings: irq: sun7i-nmi: Add binding for the H616 NMI controller
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779g0 support
dt-bindings: timer: renesas,tmu: Add R-Car V4M support
dt-bindings: timer: renesas,cmt: Add R-Car V4M support
of: Use scope based of_node_put() cleanups
of: Use scope based kfree() cleanups
...
|
|
Update the list with the current maintainers of TI's CPSW ethernet
peripheral.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240516054932.27597-1-r-gunasekaran@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
On SA8775P, Ethernet DMA controller is coherent with the CPU.
allow specifying that.
Signed-off-by: Sagar Cheluvegowda <quic_scheluve@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240514-mark_ethernet_devices_dma_coherent-v4-2-04e1198858c5@quicinc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
|
|
The MediaTek MT7921S is a WiFi/Bluetooth combo chip that works over
SDIO. WiFi and Bluetooth are separate SDIO functions within the chip.
While the Bluetooth SDIO function is fully discoverable, the chip has
a pin that can reset just the Bluetooth core, as opposed to the full
chip. This should be described in the device tree.
Add a device tree binding for the Bluetooth SDIO function of the MT7921S
specifically to document the reset line. This binding is based on the MMC
controller binding, which specifies one device node per SDIO function.
Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
CYW43439 is a Wi-Fi + Bluetooth combo device from Infineon.
The Bluetooth part is capable of Bluetooth 5.2 BR/EDR/LE .
This chip is present e.g. on muRata 1YN module.
Extend the binding with its DT compatible using fallback
compatible string to "brcm,bcm4329-bt" which seems to be
the oldest compatible device. This should also prevent the
growth of compatible string tables in drivers. The existing
block of compatible strings is retained.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
The RZ/N1 series of MPUs feature up to two Gigabit Ethernet controllers.
These controllers are based on Synopsys IPs. They can be connected to
RZ/N1 RGMII/RMII converters.
Add a binding that describes these GMAC devices.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
[rgantois: commit log]
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://lore.kernel.org/r/20240513-rzn1-gmac1-v7-1-6acf58b5440d@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"As usual, these are updates for drivers that are specific to certain
SoCs or firmware running on them.
Notable updates include
- The new STMicroelectronics STM32 "firewall" bus driver that is used
to provide a barrier between different parts of an SoC
- Lots of updates for the Qualcomm platform drivers, in particular
SCM, which gets a rewrite of its initialization code
- Firmware driver updates for Arm FF-A notification interrupts and
indirect messaging, SCMI firmware support for pin control and
vendor specific interfaces, and TEE firmware interface changes
across multiple TEE drivers
- A larger cleanup of the Mediatek CMDQ driver and some related bits
- Kconfig changes for riscv drivers to prepare for adding Kanaan k230
support
- Multiple minor updates for the TI sysc bus driver, memory
controllers, hisilicon hccs and more"
* tag 'soc-drivers-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (103 commits)
firmware: qcom: uefisecapp: Allow on sc8180x Primus and Flex 5G
soc: qcom: pmic_glink: Make client-lock non-sleeping
dt-bindings: soc: qcom,wcnss: fix bluetooth address example
soc/tegra: pmc: Add EQOS wake event for Tegra194 and Tegra234
bus: stm32_firewall: fix off by one in stm32_firewall_get_firewall()
bus: etzpc: introduce ETZPC firewall controller driver
firmware: arm_ffa: Avoid queuing work when running on the worker queue
bus: ti-sysc: Drop legacy idle quirk handling
bus: ti-sysc: Drop legacy quirk handling for smartreflex
bus: ti-sysc: Drop legacy quirk handling for uarts
bus: ti-sysc: Add a description and copyrights
bus: ti-sysc: Move check for no-reset-on-init
soc: hisilicon: kunpeng_hccs: replace MAILBOX dependency with PCC
soc: hisilicon: kunpeng_hccs: Add the check for obtaining complete port attribute
firmware: arm_ffa: Fix memory corruption in ffa_msg_send2()
bus: rifsc: introduce RIFSC firewall controller driver
of: property: fw_devlink: Add support for "access-controller"
soc: mediatek: mtk-socinfo: Correct the marketing name for MT8188GV
soc: mediatek: mtk-socinfo: Add entry for MT8395AV/ZA Genio 1200
soc: mediatek: mtk-mutex: Add support for MT8188 VPPSYS
...
|
|
The ath10k driver waits for an "MSA_READY" indicator
to complete initialization. If the indicator is not
received, then the device remains unusable.
cf. ath10k_qmi_driver_event_work()
Several msm8998-based devices are affected by this issue.
Oddly, it seems safe to NOT wait for the indicator, and
proceed immediately when QMI_EVENT_SERVER_ARRIVE.
Jeff Johnson wrote:
The feedback I received was "it might be ok to change all ath10k qmi
to skip waiting for msa_ready", and it was pointed out that ath11k
(and ath12k) do not wait for it.
However with so many deployed devices, "might be ok" isn't a strong
argument for changing the default behavior.
Kalle Valo first suggested setting a bit in firmware-5.bin to trigger
work-around in the driver. However, firmware-5.bin is parsed too late.
So we are stuck with a DT property.
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/54ac2295-36b4-49fc-9583-a10db8d9d5d6@freebox.fr
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
35d92abfbad8 ("net: hns3: fix kernel crash when devlink reload during initialization")
2a1a1a7b5fd7 ("net: hns3: add command queue trace for hns3")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
