summaryrefslogtreecommitdiff
path: root/Documentation/acpi
AgeCommit message (Collapse)AuthorFilesLines
2017-10-11ACPI / LPIT: Add Low Power Idle Table (LPIT) supportSrinivas Pandruvada1-0/+25
Add functionality to read LPIT table, which provides: - Sysfs interface to read residency counters via /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us /sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us Here the count "low_power_idle_cpu_residency_us" shows the time spent by CPU package in low power state. This is read via MSR interface, which points to MSR for PKG C10. Here the count "low_power_idle_system_residency_us" show the count the system was in low power state. This is read via MMIO interface. This is mapped to SLP_S0 residency on modern Intel systems. This residency is achieved only when CPU is in PKG C10 and all functional blocks are in low power state. It is possible that none of the above counters present or anyone of the counter present or all counters present. For example: On my Kabylake system both of the above counters present. After suspend to idle these counts updated and prints: 6916179 6998564 This counter can be read by tools like turbostat to display. Or it can be used to debug, if modern systems are reaching desired low power state. - Provides an interface to read residency counter memory address This address can be used to get the base address of PMC memory mapped IO. This is utilized by intel_pmc_core driver to print more debug information. In addition, to avoid code duplication to read iomem, removed the read of iomem from acpi_os_read_memory() in osl.c and made a common function acpi_os_read_iomem(). This new function is used for reading iomem in in both osl.c and acpi_lpit.c. Link: http://www.uefi.org/sites/default/files/resources/Intel_ACPI_Low_Power_S0_Idle.pdf Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-07Merge tag 'gpio-v4.13-1' of ↵Linus Torvalds1-0/+65
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.13 series. Some administrativa: I have a slew of 8250 serial patches and the new IOT2040 serial+GPIO driver coming in through this tree, along with a whole bunch of Exar 8250 fixes. These are ACKed by Greg and also hit drivers/platform/* where they are ACKed by Andy Shevchenko. Speaking about drivers/platform/* there is also a bunch of ACPI stuff coming through that route, again ACKed by Andy. The MCP23S08 changes are coming in here as well. You already have the commits in your tree, so this is just a result of sharing an immutable branch between pin control and GPIO. Core: - Export add/remove for lookup tables so that modules can export GPIO descriptor tables. - Handle GPIO sleep states: it is now possible to flag that a GPIO line may loose its state during suspend/resume of the system to save power. This is used in the Wolfson Micro Arizona driver. - ACPI-based GPIO was tightened up a lot around the edges. - Use bitmap_fill() to speed up a loop. New drivers: - Exar XRA1403 SPI-based GPIO. - MVEBU driver now supports Armada 7K and 8K. - LP87565 PMIC GPIO. - Renesas R-CAR R8A7743 (RZ/G1M). - The new IOT2040 8250 serial/GPIO also comes in through this changeset. Substantial driver changes: - Seriously fix the Exar 8250 GPIO portions to work. - The MCP23S08 was moved out to a pin control driver. - Convert MEVEBU to use regmap for register access. - Drop Vulcan support from the Broadcom driver. - Serious cleanup and improvement of the mockup driver, giving us a better test coverage. Misc: - Lots of janitorial clean up. - A bunch of documentation fixes" * tag 'gpio-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (70 commits) serial: exar: Add support for IOT2040 device gpio-exar/8250-exar: Make set of exported GPIOs configurable platform: Accept const properties serial: exar: Factor out platform hooks gpio-exar/8250-exar: Rearrange gpiochip parenthood gpio: exar: Fix iomap request gpio-exar/8250-exar: Do not even instantiate a GPIO device for Commtech cards serial: uapi: Add support for bus termination gpio: rcar: Add R8A7743 (RZ/G1M) support gpio: gpio-wcove: Fix GPIO control register offset calculation gpio: lp87565: Add support for GPIO gpio: dwapb: fix missing first irq for edgeboth irq type MAINTAINERS: Take maintainership for GPIO ACPI support gpio: exar: Fix reading of directions and values gpio: exar: Allocate resources on behalf of the platform device gpio-exar/8250-exar: Fix passing in of parent PCI device gpio: mockup: use devm_kcalloc() where applicable gpio: mockup: add myself as author gpio: mockup: improve the error message gpio: mockup: don't return magic numbers from probe() ...
2017-05-29gpio: acpi: Explain how to get GPIO descriptors in ACPI caseAndy Shevchenko1-0/+65
Documentation lacks of explanation how we actually use device properties for GPIO resources. Add a section to the documentation about that. Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22Merge branches 'acpi-button' and 'acpi-tools'Rafael J. Wysocki1-4/+12
* acpi-button: Revert "ACPI / button: Remove lid_init_state=method mode" * acpi-tools: tools/power/acpi: Add .gitignore file
2017-05-12Revert "ACPI / button: Remove lid_init_state=method mode"Lv Zheng1-4/+12
This reverts commit ecb10b694b72ca5ea51b3c90a71ff2a11963425a. The only expected ACPI control method lid device's usage model is 1. Listen to the lid notification, 2. Evaluate _LID after being notified by BIOS, 3. Suspend the system (if users configure to do so) after seeing "close". It's not ensured that BIOS will notify OS after boot/resume, and it's not ensured that BIOS will always generate "open" event upon opening the lid. But there are 2 wrong usage models: 1. When the lid device is responsible for suspend/resume the system, userspace requires to see "open" event to be paired with "close" after the system is resumed, or it will suspend the system again. 2. When an external monitor connects to the laptop attached docks, userspace requires to see "close" event after the system is resumed so that it can determine whether the internal display should remain dark and the external display should be lit on. After we made default kernel behavior to be suitable for usage model 1, users of usage model 2 start to report regressions for such behavior change. Reversion of button.lid_init_state=method doesn't actually reverts to old default behavior as doing so can enter a regression loop, but facilitates users to work the reported regressions around with button.lid_init_state=method. Fixes: ecb10b694b72 (ACPI / button: Remove lid_init_state=method mode) Cc: 4.11+ <stable@vger.kernel.org> # 4.11+ Link: https://bugzilla.kernel.org/show_bug.cgi?id=195455 Link: https://bugzilla.redhat.com/show_bug.cgi?id=1430259 Tested-by: Steffen Weber <steffen.weber@gmail.com> Tested-by: Julian Wiedmann <julian.wiedmann@jwi.name> Reported-by: Joachim Frieben <jfrieben@hotmail.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-05-02Merge tag 'docs-4.12' of git://git.lwn.net/linuxLinus Torvalds2-4/+4
Pull documentation update from Jonathan Corbet: "A reasonably busy cycle for documentation this time around. There is a new guide for user-space API documents, rather sparsely populated at the moment, but it's a start. Markus improved the infrastructure for converting diagrams. Mauro has converted much of the USB documentation over to RST. Plus the usual set of fixes, improvements, and tweaks. There's a bit more than the usual amount of reaching out of Documentation/ to fix comments elsewhere in the tree; I have acks for those where I could get them" * tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits) docs: Fix a couple typos docs: Fix a spelling error in vfio-mediated-device.txt docs: Fix a spelling error in ioctl-number.txt MAINTAINERS: update file entry for HSI subsystem Documentation: allow installing man pages to a user defined directory Doc/PM: Sync with intel_powerclamp code behavior zr364xx.rst: usb/devices is now at /sys/kernel/debug/ usb.rst: move documentation from proc_usb_info.txt to USB ReST book convert philips.txt to ReST and add to media docs docs-rst: usb: update old usbfs-related documentation arm: Documentation: update a path name docs: process/4.Coding.rst: Fix a couple of document refs docs-rst: fix usb cross-references usb: gadget.h: be consistent at kernel doc macros usb: composite.h: fix two warnings when building docs usb: get rid of some ReST doc build errors usb.rst: get rid of some Sphinx errors usb/URB.txt: convert to ReST and update it usb/persist.txt: convert to ReST and add to driver-api book usb/hotplug.txt: convert to ReST and add to driver-api book ...
2017-05-01Merge tag 'devprop-4.12-rc1' of ↵Linus Torvalds1-0/+162
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull generic device properties framework updates from Rafael Wysocki: "These add support for the ports and endpoints concepts, based on the existing DT support for them, to the generic device properties framework and update the ACPI _DSD properties code to recognize ports and endpoints accordingly. Specifics: - Extend the ACPI _DSD properties code and the generic device properties framework to support the concept of remote endponts (Mika Westerberg, Sakari Ailus). - Document the support for ports and endpoints in _DSD properties and extend the generic device properties framework to make it more suitable for the handling of ports and endpoints (Sakari Ailus)" * tag 'devprop-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Read strings using string array reading functions device property: fwnode_property_read_string_array() returns nr of strings device property: Fix reading pset strings using array access functions device property: fwnode_property_read_string_array() may return -EILSEQ ACPI / DSD: Document references, ports and endpoints device property: Add fwnode_get_next_parent() device property: Add support for fwnode endpoints device property: Make dev_fwnode() public of: Add of_fwnode_handle() to convert device nodes to fwnode_handle device property: Add fwnode_handle_get() device property: Add support for remote endpoints ACPI / property: Add support for remote endpoints device property: Add fwnode_get_named_child_node() ACPI / property: Add fwnode_get_next_child_node() device property: Add fwnode_get_parent() ACPI / property: Add possiblity to retrieve parent firmware node
2017-04-19ACPI / doc: linuxized-acpica.txt: fix typosCao jin1-5/+5
Fix some typos in the linuxized-acpica.txt document. Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> [ rjw: Subject / changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-03-29ACPI / DSD: Document references, ports and endpointsSakari Ailus1-0/+162
Document the use of references into the hierarchical data extension structure, as well as the use of port and endpoint concepts that are very similar to those in Devicetree. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-03-17Documentation: acpi: Fix typosTamara Diaconita3-7/+7
Fix typos in acpi directory to make documentation grammatically correct. Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-02-27scripts/spelling.txt: add "followings" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: followings||following While we are here, add a missing colon in the boilerplate in DT binding documents. The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as well. I reworded "as the followings:" to "as follows:" for drivers/usb/gadget/udc/renesas_usb3.c. Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27scripts/spelling.txt: add "overrided" pattern and fix typo instancesMasahiro Yamada1-1/+1
Fix typos and add the following to the scripts/spelling.txt: overrided||overridden Link: http://lkml.kernel.org/r/1481573103-11329-22-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-31ACPI / button: Remove lid_init_state=method modeLv Zheng1-12/+4
The mode is buggy, and lid_init__state=open is more useful than this mode, so this patch makes it deprecated. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-12-13Merge tag 'acpi-4.10-rc1' of ↵Linus Torvalds3-0/+293
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "The ACPICA code in the kernel gets updated as usual (included is upstream revision 20160930 and a few commits from the next one, with the rest waiting for an issue discovered in linux-next to be addressed) which brings in a couple of fixes and cleanups On top of that initial support for APEI on ARM64 is added, two new pieces of documentation are introduced, the properties-parsing code is updated to follow changes in the (external) documentation it is based on and there are a few updates of SoC drivers, some new blacklist entries, plus some assorted fixes and cleanups Specifics: - ACPICA update including upstream revision 20160930 and several commits beyond it (Bob Moore, Lv Zheng) - Initial support for ACPI APEI on ARM64 (Tomasz Nowicki) - New document describing the handling of _OSI and _REV in Linux (Len Brown) - New document describing the usage rules for _DSD properties (Rafael Wysocki) - Update of the ACPI properties-parsing code to reflect recent changes in the (external) documentation it is based on (Rafael Wysocki) - Updates of the ACPI LPSS and ACPI APD SoC drivers for additional hardware support (Andy Shevchenko, Nehal Shah) - New blacklist entries for _REV and video handling (Alex Hung, Hans de Goede, Michael Pobega) - ACPI battery driver fix to fall back to _BIF if _BIX fails (Dave Lambley) - NMI notifications handling fix for APEI (Prarit Bhargava) - Error code path fix for the ACPI CPPC library (Dan Carpenter) - Assorted cleanups (Andy Shevchenko, Longpeng Mike)" * tag 'acpi-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (31 commits) ACPICA: Utilities: Add new decode function for parser values ACPI / osl: Refactor acpi_os_get_root_pointer() to drop 'else':s ACPI / osl: Propagate actual error code for kstrtoul() ACPI / property: Document usage rules for _DSD properties ACPI: Document _OSI and _REV for Linux BIOS writers ACPI / APEI / ARM64: APEI initial support for ARM64 ACPI / APEI: Fix NMI notification handling ACPICA: Tables: Add an error message complaining driver bugs ACPICA: Tables: Add acpi_tb_unload_table() ACPICA: Tables: Cleanup acpi_tb_install_and_load_table() ACPICA: Events: Fix acpi_ev_initialize_region() return value ACPICA: Back port of "ACPICA: Dispatcher: Tune interpreter lock around AcpiEvInitializeRegion()" ACPICA: Namespace: Add acpi_ns_handle_to_name() ACPI / CPPC: set an error code on probe error path ACPI / video: Add force_native quirk for HP Pavilion dv6 ACPI / video: Add force_native quirk for Dell XPS 17 L702X ACPI / property: Hierarchical properties support update ACPI / LPSS: enable hard LLP for DMA ACPI / battery: If _BIX fails, retry with _BIF ACPI / video: Move ACPI_VIDEO_NOTIFY_* defines to acpi/video.h ..
2016-12-13Merge tag 'gpio-v4.10-1' of ↵Linus Torvalds1-0/+62
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Luinus Walleij: "Bulk GPIO changes for the v4.10 kernel cycle: Core changes: - Simplify threaded interrupt handling: instead of passing numbed parameters to gpiochip_irqchip_add_chained() we create a new call: gpiochip_irqchip_add_nested() so the two types are clearly semantically different. Also make sure that all nested chips call gpiochip_set_nested_irqchip() which is necessary for IRQ resend to work properly if it happens. - Return error on seek operations for the chardev. - Clamp values set as part of gpio[d]_direction_output() so that anything != 0 will be send down to the driver as "1" not the value passed in. - ACPI can now support naming of GPIO lines, hogs and holes in the GPIO lists. New drivers: - The SX150x driver was deemed unfit for the GPIO subsystem and was moved over to a combined GPIO+pinctrl driver in the pinctrl subsystem. New features: - Various cleanups to various drivers" * tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits) gpio: merrifield: Implement gpio_get_direction callback gpio: merrifield: Add support for hardware debouncer gpio: chardev: Return error for seek operations gpio: arizona: Tidy up probe error path gpio: arizona: Remove pointless set of platform drvdata gpio: pl061: delete platform data handling gpio: pl061: move platform data into driver gpio: pl061: rename variable from chip to pl061 gpio: pl061: rename state container struct gpio: pl061: use local state for parent IRQ storage gpio: set explicit nesting on drivers gpio: simplify adding threaded interrupts gpio: vf610: use builtin_platform_driver gpio: axp209: use correct register for GPIO input status gpio: stmpe: fix interrupt handling bug gpio: em: depnd on ARCH_SHMOBILE gpio: zx: depend on ARCH_ZX gpio: x86: update config dependencies for x86 specific hardware gpio: mb86s7x: use builtin_platform_driver gpio: etraxfs: use builtin_platform_driver ...
2016-12-12Merge branch 'device-properties'Rafael J. Wysocki2-0/+106
* device-properties: ACPI / property: Document usage rules for _DSD properties ACPI / property: Hierarchical properties support update
2016-12-06ACPI / property: Document usage rules for _DSD propertiesRafael J. Wysocki2-0/+106
Following some discussions during the Kernel Summit and LPC, document what can be returned from ACPI _DSD as device properties and when it is valid to use the special PRP0001 device ID. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviwed-by: Mark Brown <broonie@kernel.org>
2016-12-03ACPI: Document _OSI and _REV for Linux BIOS writersLen Brown1-0/+187
Based on a recent session at the Linux Plumber's Conference, we need to be more clear about how a BIOS should use _OSI to properly support Linux. Signed-off-by: Len Brown <len.brown@intel.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-24ACPI / gpio: Add support for naming GPIOsMika Westerberg1-0/+12
Now that we have the new helper function that sets nice names for GPIO lines based on "gpio-line-names" device property, we can take advantage of this in acpi_gpiochip_add(). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24ACPI / gpio: Add hogging supportMika Westerberg1-0/+35
GPIO hogging means that the GPIO controller can "hog" and configure certain GPIOs without need for a driver or userspace to do that. This is useful in open-connected boards where BIOS cannot possibly know beforehand which devices will be connected to the board. This adds GPIO hogging mechanism to ACPI analogous to Device Tree. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24ACPI / gpio: Allow holes in list of GPIOs for a deviceMika Westerberg1-0/+15
Make it possible to have an empty GPIOs in a GPIO list for device. For example a SPI master may use both GPIOs and native pins as chip selects and we need to be able to distinguish between the two. This makes it mandatory to have exactly 3 arguments for GPIOs and then converts gpiolib to use of __acpi_node_get_property_reference() instead. In addition we make acpi_gpio_package_count() to handle holes as well (this matches the DT version). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24docs: fix locations of several documents that got movedMauro Carvalho Chehab1-1/+1
The previous patch renamed several files that are cross-referenced along the Kernel documentation. Adjust the links to point to the right places. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-10-02Merge branches 'acpi-button', 'acpi-battery' and 'acpi-doc'Rafael J. Wysocki2-5/+101
* acpi-button: ACPI / button: Add document for ACPI control method lid device restrictions ACPI / button: Fix an issue in button.lid_init_state=ignore mode * acpi-battery: ACPI / battery: Add sysfs representation after checking _BST * acpi-doc: ACPI / documentation: Use recommended name in GPIO property names
2016-09-29ACPI / documentation: Use recommended name in GPIO property namesMika Westerberg1-5/+5
The recommended property name for all kinds of GPIOs is to end it with "-gpios" even if there is only one GPIO. Update the documentation to follow this fact. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-31ACPI / button: Add document for ACPI control method lid device restrictionsLv Zheng1-0/+96
This patch adds documentation for the usage model of the control method lid device on some buggy platforms. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Acked-by: Benjamin Tissoires <benjamin.tissoires@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-25Merge branches 'acpi-bus', 'acpi-pci', 'acpica' and 'acpi-doc'Rafael J. Wysocki2-0/+328
* acpi-bus: ACPI / bus: Support for platform initiated graceful shutdown ACPI / bus: Correct the comments about acpi_subsystem_init() ACPI / bus: Use acpi_handle_debug() in acpi_print_osc_error() * acpi-pci: ACPI / PCI: make pci_slot explicitly non-modular ACPI / PCI: pci_slot: Use generic pr_debug utility ACPI / PCI: pci_slot: Use more common logging style * acpica: ACPICA: Linux: Enable ACPI_MUTEX_DEBUG for Linux kernel * acpi-doc: ACPI / debugger: Add AML debugger documentation ACPI: Add documentation describing ACPICA release automation
2016-07-08ACPI / debugger: Add AML debugger documentationLv Zheng1-0/+66
This patch documents the AML debugger. Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Editorial changes ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08ACPI: Add documentation describing ACPICA release automationLv Zheng1-0/+262
This patch documents the ACPICA release automation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> [ rjw: Editorial changes ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08ACPI: add support for loading SSDTs via configfsOctavian Purdila1-0/+14
New tables can be loaded by creating directories under /config/table/ and writing the AML code into the aml table attribute. Various table attributes will be readable once the table is successfully loaded. Unloading tables is not supported at the moment, but it can be easily implemented once ACPI loading functions provide a table handle to be used for unloading. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08efi / ACPI: load SSTDs from EFI variablesOctavian Purdila1-0/+67
This patch allows SSDTs to be loaded from EFI variables. It works by specifying the EFI variable name containing the SSDT to be loaded. All variables with the same name (regardless of the vendor GUID) will be loaded. Note that we can't use acpi_install_table and we must rely on the dynamic ACPI table loading and bus re-scanning mechanisms. That is because I2C/SPI controllers are initialized earlier then the EFI subsystems and all I2C/SPI ACPI devices are enumerated when the I2C/SPI controllers are initialized. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-07-08ACPI / documentation: add SSDT overlays documentationOctavian Purdila1-0/+91
Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-18ACPI / tables: Convert initrd table override to table upgrade mechanismLv Zheng1-26/+39
This patch converts the initrd table override mechanism to the table upgrade mechanism by restricting its usage to the tables released with compatibility and more recent revision. This use case has been encouraged by the ACPI specification: 1. OEMID: An OEM-supplied string that identifies the OEM. 2. OEM Table ID: An OEM-supplied string that the OEM uses to identify the particular data table. This field is particularly useful when defining a definition block to distinguish definition block functions. OEM assigns each dissimilar table a new OEM Table Id. 3. OEM Revision: An OEM-supplied revision number. Larger numbers are assumed to be newer revisions. For OEMs, good practices will ensure consistency when assigning OEMID and OEM Table ID fields in any table. The intent of these fields is to allow for a binary control system that support services can use. Because many support function can be automated, it is useful when a tool can programatically determine which table release is a compatible and more recent revision of a prior table on the same OEMID and OEM Table ID. The facility can now be used by the vendors to upgrade wrong tables for bug fixing purpose, thus lockdep disabling taint is not suitable for it and it should be a default 'y' option to implement the spec encouraged use case. Note that, by implementing table upgrade inside of ACPICA itself, it is possible to remove acpi_table_initrd_override() and tables can be upgraded by acpi_install_table() automatically. Though current ACPICA impelentation hasn't implemented this, this patched changes the table flag setting timing to allow this to be implemented in ACPICA without changing the code here. Documentation of initrd override mechanism is upgraded accordingly. Original-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-25i2c: add ACPI support for I2C mux portsDustin Byford1-0/+58
Although I2C mux devices are easily enumerated using ACPI (_HID/_CID or device property compatible string match), enumerating I2C client devices connected through an I2C mux needs a little extra work. This change implements a method for describing an I2C device hierarchy that includes mux devices by using an ACPI Device() for each mux channel along with an _ADR to set the channel number for the device. See Documentation/acpi/i2c-muxes.txt for a simple example. To make this work the ismt, i801, and designware pci/platform devs now share an ACPI companion with their I2C adapter dev similar to how it's done in OF. This is done on the assumption that power management functions will not be called directly on the I2C dev that is sharing the ACPI node. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Dustin Byford <dustin@cumulusnetworks.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-10-23mfd: core: redo ACPI matching of the children devicesAndy Shevchenko1-3/+8
There is at least one board on the market, i.e. Intel Galileo Gen2, that uses _ADR to distinguish the devices under one actual device. Due to this we have to improve the quirk in the MFD core to handle that board. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2015-08-07ACPI / Documentation: Update method tracing documentation.Lv Zheng1-19/+185
This patch updates method tracing documentation. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-19ACPI: Constify ACPI device IDs in documentationMathias Krause1-3/+3
ACPI device ID arrays normally don't need to be written to as they're only ever read. The common usage -- embedding pointers to acpi_device_id arrays in other data structures -- reference them as 'const', e.g. as in struct acpi_driver / acpi_scan_handler / device_driver. The matchers are taking const pointers, too. So it's only natural, to propose using const arrays. Change the documentation accordingly. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-06-19ACPI / enumeration: Document the rules regarding the PRP0001 device IDRafael J. Wysocki1-0/+51
Document how the ACPI device enumeration code uses the special PRP0001 device ID. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Darren Hart <dvhart@linux.intel.com>
2015-05-04ACPI / documentation: Fix ambiguity in the GPIO properties documentRafael J. Wysocki1-3/+3
The first paragraph in Documentation/acpi/gpio-properties.txt is ambiguous, so make it more clear. Reported-by: Antonio Ospite <ao2@ao2.it> Acked-by: Antonio Ospite <ao2@ao2.it> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-30ACPI / documentation: fix a sentence about GPIO resourcesAntonio Ospite1-1/+1
The sentence "These resources are used be used to pass ..." contains a suspicious repetition, likely the author meant "These resources can be used to pass ...". Simplify the wording. Signed-off-by: Antonio Ospite <ao2@ao2.it> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-04-14Merge tag 'pm+acpi-4.1-rc1' of ↵Linus Torvalds1-3/+23
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael Wysocki: "These are mostly fixes and cleanups all over, although there are a few items that sort of fall into the new feature category. First off, we have new callbacks for PM domains that should help us to handle some issues related to device initialization in a better way. There also is some consolidation in the unified device properties API area allowing us to use that inferface for accessing data coming from platform initialization code in addition to firmware-provided data. We have some new device/CPU IDs in a few drivers, support for new chips and a new cpufreq driver too. Specifics: - Generic PM domains support update including new PM domain callbacks to handle device initialization better (Russell King, Rafael J Wysocki, Kevin Hilman) - Unified device properties API update including a new mechanism for accessing data provided by platform initialization code (Rafael J Wysocki, Adrian Hunter) - ARM cpuidle update including ARM32/ARM64 handling consolidation (Daniel Lezcano) - intel_idle update including support for the Silvermont Core in the Baytrail SOC and for the Airmont Core in the Cherrytrail and Braswell SOCs (Len Brown, Mathias Krause) - New cpufreq driver for Hisilicon ACPU (Leo Yan) - intel_pstate update including support for the Knights Landing chip (Dasaratharaman Chandramouli, Kristen Carlson Accardi) - QorIQ cpufreq driver update (Tang Yuantian, Arnd Bergmann) - powernv cpufreq driver update (Shilpasri G Bhat) - devfreq update including Tegra support changes (Tomeu Vizoso, MyungJoo Ham, Chanwoo Choi) - powercap RAPL (Running-Average Power Limit) driver update including support for Intel Broadwell server chips (Jacob Pan, Mathias Krause) - ACPI device enumeration update related to the handling of the special PRP0001 device ID allowing DT-style 'compatible' property to be used for ACPI device identification (Rafael J Wysocki) - ACPI EC driver update including limited _DEP support (Lan Tianyu, Lv Zheng) - ACPI backlight driver update including a new mechanism to allow native backlight handling to be forced on non-Windows 8 systems and a new quirk for Lenovo Ideapad Z570 (Aaron Lu, Hans de Goede) - New Windows Vista compatibility quirk for Sony VGN-SR19XN (Chen Yu) - Assorted ACPI fixes and cleanups (Aaron Lu, Martin Kepplinger, Masanari Iida, Mika Westerberg, Nan Li, Rafael J Wysocki) - Fixes related to suspend-to-idle for the iTCO watchdog driver and the ACPI core system suspend/resume code (Rafael J Wysocki, Chen Yu) - PM tracing support for the suspend phase of system suspend/resume transitions (Zhonghui Fu) - Configurable delay for the system suspend/resume testing facility (Brian Norris) - PNP subsystem cleanups (Peter Huewe, Rafael J Wysocki)" * tag 'pm+acpi-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits) ACPI / scan: Fix NULL pointer dereference in acpi_companion_match() ACPI / scan: Rework modalias creation when "compatible" is present intel_idle: mark cpu id array as __initconst powercap / RAPL: mark rapl_ids array as __initconst powercap / RAPL: add ID for Broadwell server intel_pstate: Knights Landing support intel_pstate: remove MSR test cpufreq: fix qoriq uniprocessor build ACPI / scan: Take the PRP0001 position in the list of IDs into account ACPI / scan: Simplify acpi_match_device() ACPI / scan: Generalize of_compatible matching device property: Introduce firmware node type for platform data device property: Make it possible to use secondary firmware nodes PM / watchdog: iTCO: stop watchdog during system suspend cpufreq: hisilicon: add acpu driver ACPI / EC: Call acpi_walk_dep_device_list() after installing EC opregion handler cpufreq: powernv: Report cpu frequency throttling intel_idle: Add support for the Airmont Core in the Cherrytrail and Braswell SOCs intel_idle: Update support for Silvermont Core in Baytrail SOC PM / devfreq: tegra: Register governor on module init ...
2015-04-13Merge branch 'x86-ras-for-linus' of ↵Linus Torvalds1-74/+122
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS changes from Ingo Molnar: "The main changes in this cycle were: - Simplify the CMCI storm logic on Intel CPUs after yet another report about a race in the code (Borislav Petkov) - Enable the MCE threshold irq on AMD CPUs by default (Aravind Gopalakrishnan) - Add AMD-specific MCE-severity grading function. Further error recovery actions will be based on its output (Aravind Gopalakrishnan) - Documentation updates (Borislav Petkov) - ... assorted fixes and cleanups" * 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce/severity: Fix warning about indented braces x86/mce: Define mce_severity function pointer x86/mce: Add an AMD severities-grading function x86/mce: Reindent __mcheck_cpu_apply_quirks() properly x86/mce: Use safe MSR accesses for AMD quirk x86/MCE/AMD: Enable thresholding interrupts by default if supported x86/MCE: Make mce_panic() fatal machine check msg in the same pattern x86/MCE/intel: Cleanup CMCI storm logic Documentation/acpi/einj: Correct and streamline text x86/MCE/AMD: Drop bogus const modifier from AMD's bank4_names()
2015-03-18ACPI: Update GPIO documentation to mention _DSDMika Westerberg1-3/+23
Make sure that the ACPI enumeration.txt provides latest information on how to describe and retrieve GPIOs now that we can take advantage of _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-19Documentation/acpi/einj: Correct and streamline textBorislav Petkov1-74/+122
Streamline and simplify formulations, improve formatting and extend the injection example in the error injection write up for users which we carry in Documentation/. Add a paragraph about checking for EINJ support and expand the ACPI5.0 memory errors section, as requested by Tony. Acked-by: Tony Luck <tony.luck@intel.com> Link: http://lkml.kernel.org/r/1422553845-30717-1-git-send-email-bp@alien8.de Signed-off-by: Borislav Petkov <bp@suse.de>
2015-01-22ACPI / Documentation: add a missing '='Yaowei Bai1-1/+1
Signed-off-by: Yaowei Bai <bywxiaobai@163.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-11-04ACPI / GPIO: Document ACPI GPIO mappings APIRafael J. Wysocki1-0/+44
Document the previously introduced method that can be used by device drivers to provide the GPIO subsystem with mappings between GPIO names (connection IDs) and GpioIo()/GpioInt() resources in _CRS. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-11-04gpio / ACPI: Add support for _DSD device propertiesMika Westerberg1-0/+52
With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-26mfd: Add ACPI supportMika Westerberg1-0/+27
If an MFD device is backed by ACPI namespace, we should allow subdevice drivers to access their corresponding ACPI companion devices through normal means (e.g using ACPI_COMPANION()). This patch adds such support to the MFD core. If the MFD parent device does not specify any ACPI _HID/_CID for the child device, the child device will share the parent ACPI companion device. Otherwise the child device will be assigned with the corresponding ACPI companion, if found in the namespace below the parent. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-12ACPI / documentation: Remove reference to acpi_platform_device_ids from ↵Darren Hart1-6/+0
enumeration.txt As of: 4845934 ACPI / scan: use platform bus type by default for _HID enumeration ACPI uses the platform bus by default, changing the opt-in to an opt-out policy, eliminating the acpi_platform_device_ids table and replacing it with forbidden_id_list[]. Remove the qualifying paragraph from the acpi/enumeration documentation as it no longer applies. Reported-by: Max Eliaser <max@meliaserlow.dyndns.tv> Signed-off-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-23Documentation / ACPI: Fix location of GPIO documentationJarkko Nikula1-1/+1
Commit fd8e198cfcaa ("Documentation: gpiolib: document new interface") moved Documentation/gpio.txt to Documentation/gpio/gpio-legacy.txt and added new documents for descriptor-based interface so fix the the location here to point Documentation/gpio/ since that what commit ccb6fbb99020 ("Documentation / ACPI: update to GPIO descriptor API") was looking for. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-24Merge tag 'pm+acpi-3.14-rc1' of ↵Linus Torvalds1-8/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "As far as the number of commits goes, the top spot belongs to ACPI this time with cpufreq in the second position and a handful of PM core, PNP and cpuidle updates. They are fixes and cleanups mostly, as usual, with a couple of new features in the mix. The most visible change is probably that we will create struct acpi_device objects (visible in sysfs) for all devices represented in the ACPI tables regardless of their status and there will be a new sysfs attribute under those objects allowing user space to check that status via _STA. Consequently, ACPI device eject or generally hot-removal will not delete those objects, unless the table containing the corresponding namespace nodes is unloaded, which is extremely rare. Also ACPI container hotplug will be handled quite a bit differently and cpufreq will support CPU boost ("turbo") generically and not only in the acpi-cpufreq driver. Specifics: - ACPI core changes to make it create a struct acpi_device object for every device represented in the ACPI tables during all namespace scans regardless of the current status of that device. In accordance with this, ACPI hotplug operations will not delete those objects, unless the underlying ACPI tables go away. - On top of the above, new sysfs attribute for ACPI device objects allowing user space to check device status by triggering the execution of _STA for its ACPI object. From Srinivas Pandruvada. - ACPI core hotplug changes reducing code duplication, integrating the PCI root hotplug with the core and reworking container hotplug. - ACPI core simplifications making it use ACPI_COMPANION() in the code "glueing" ACPI device objects to "physical" devices. - ACPICA update to upstream version 20131218. This adds support for the DBG2 and PCCT tables to ACPICA, fixes some bugs and improves debug facilities. From Bob Moore, Lv Zheng and Betty Dall. - Init code change to carry out the early ACPI initialization earlier. That should allow us to use ACPI during the timekeeping initialization and possibly to simplify the EFI initialization too. From Chun-Yi Lee. - Clenups of the inclusions of ACPI headers in many places all over from Lv Zheng and Rashika Kheria (work in progress). - New helper for ACPI _DSM execution and rework of the code in drivers that uses _DSM to execute it via the new helper. From Jiang Liu. - New Win8 OSI blacklist entries from Takashi Iwai. - Assorted ACPI fixes and cleanups from Al Stone, Emil Goode, Hanjun Guo, Lan Tianyu, Masanari Iida, Oliver Neukum, Prarit Bhargava, Rashika Kheria, Tang Chen, Zhang Rui. - intel_pstate driver updates, including proper Baytrail support, from Dirk Brandewie and intel_pstate documentation from Ramkumar Ramachandra. - Generic CPU boost ("turbo") support for cpufreq from Lukasz Majewski. - powernow-k6 cpufreq driver fixes from Mikulas Patocka. - cpufreq core fixes and cleanups from Viresh Kumar, Jane Li, Mark Brown. - Assorted cpufreq drivers fixes and cleanups from Anson Huang, John Tobias, Paul Bolle, Paul Walmsley, Sachin Kamat, Shawn Guo, Viresh Kumar. - cpuidle cleanups from Bartlomiej Zolnierkiewicz. - Support for hibernation APM events from Bin Shi. - Hibernation fix to avoid bringing up nonboot CPUs with ACPI EC disabled during thaw transitions from Bjørn Mork. - PM core fixes and cleanups from Ben Dooks, Leonardo Potenza, Ulf Hansson. - PNP subsystem fixes and cleanups from Dmitry Torokhov, Levente Kurusa, Rashika Kheria. - New tool for profiling system suspend from Todd E Brandt and a cpupower tool cleanup from One Thousand Gnomes" * tag 'pm+acpi-3.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (153 commits) thermal: exynos: boost: Automatic enable/disable of BOOST feature (at Exynos4412) cpufreq: exynos4x12: Change L0 driver data to CPUFREQ_BOOST_FREQ Documentation: cpufreq / boost: Update BOOST documentation cpufreq: exynos: Extend Exynos cpufreq driver to support boost cpufreq / boost: Kconfig: Support for software-managed BOOST acpi-cpufreq: Adjust the code to use the common boost attribute cpufreq: Add boost frequency support in core intel_pstate: Add trace point to report internal state. cpufreq: introduce cpufreq_generic_get() routine ARM: SA1100: Create dummy clk_get_rate() to avoid build failures cpufreq: stats: create sysfs entries when cpufreq_stats is a module cpufreq: stats: free table and remove sysfs entry in a single routine cpufreq: stats: remove hotplug notifiers cpufreq: stats: handle cpufreq_unregister_driver() and suspend/resume properly cpufreq: speedstep: remove unused speedstep_get_state platform: introduce OF style 'modalias' support for platform bus PM / tools: new tool for suspend/resume performance optimization ACPI: fix module autoloading for ACPI enumerated devices ACPI: add module autoloading support for ACPI enumerated devices ACPI: fix create_modalias() return value handling ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 22:53:25 +0000