| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull procfs fixes from Christian Brauner:
"Mode changes to files under /proc/<pid>/ aren't supported ever since
commit 6d76fa58b050 ("Don't allow chmod() on the /proc/<pid>/ files").
Due to an oversight in commit 1b3044e39a89 ("procfs: fix pthread
cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD,
mode changes on /proc/thread-self/comm were accidently allowed.
Similar, mode changes for all files beneath /proc/<pid>/net/ are
blocked but mode changes on /proc/<pid>/net itself were accidently
allowed.
Both issues come down to not using the generic proc_setattr() helper
which blocks all mode changes. This is rectified with this pull
request.
This also removes a strange nolibc test that abused /proc/<pid>/net
for testing mode changes. Using procfs for this test never made a lot
of sense given procfs has special semantics for almost everything
anway.
Both changes are minor user-visible changes. It is however very
unlikely that mode changes on proc/<pid>/net and
/proc/thread-self/comm are something that userspace relies on"
* tag 'v6.6-fs.proc.uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
procfs: block chmod on /proc/thread-self/comm
proc: use generic setattr() for /proc/$PID/net
selftests/nolibc: drop test chmod_net
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull autofs fixes from Christian Brauner:
"This fixes a memory leak in autofs reported by syzkaller and a missing
conversion from uninterruptible to interruptible wake up when autofs
is in catatonic mode"
* tag 'v6.6-vfs.autofs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
autofs: use wake_up() instead of wake_up_interruptible(()
autofs: fix memory leak of waitqueues in autofs_catatonic_mode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fchmodat2 system call from Christian Brauner:
"This adds the fchmodat2() system call. It is a revised version of the
fchmodat() system call, adding a missing flag argument. Support for
both AT_SYMLINK_NOFOLLOW and AT_EMPTY_PATH are included.
Adding this system call revision has been a longstanding request but
so far has always fallen through the cracks. While the kernel
implementation of fchmodat() does not have a flag argument the libc
provided POSIX-compliant fchmodat(3) version does. Both glibc and musl
have to implement a workaround in order to support AT_SYMLINK_NOFOLLOW
(see [1] and [2]).
The workaround is brittle because it relies not just on O_PATH and
O_NOFOLLOW semantics and procfs magic links but also on our rather
inconsistent symlink semantics.
This gives userspace a proper fchmodat2() system call that libcs can
use to properly implement fchmodat(3) and allows them to get rid of
their hacks. In this case it will immediately benefit them as the
current workaround is already defunct because of aformentioned
inconsistencies.
In addition to AT_SYMLINK_NOFOLLOW, give userspace the ability to use
AT_EMPTY_PATH with fchmodat2(). This is already possible with
fchownat() so there's no reason to not also support it for
fchmodat2().
The implementation is simple and comes with selftests. Implementation
of the system call and wiring up the system call are done as separate
patches even though they could arguably be one patch. But in case
there are merge conflicts from other system call additions it can be
beneficial to have separate patches"
Link: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=17eca54051ee28ba1ec3f9aed170a62630959143;hb=a492b1e5ef7ab50c6fdd4e4e9879ea5569ab0a6c#l35 [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c?id=718f363bc2067b6487900eddc9180c84e7739f80#n28 [2]
* tag 'v6.6-vfs.fchmodat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: fchmodat2: remove duplicate unneeded defines
fchmodat2: add support for AT_EMPTY_PATH
selftests: Add fchmodat2 selftest
arch: Register fchmodat2, usually as syscall 452
fs: Add fchmodat2()
Non-functional cleanup of a "__user * filename"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull superblock updates from Christian Brauner:
"This contains the super rework that was ready for this cycle. The
first part changes the order of how we open block devices and allocate
superblocks, contains various cleanups, simplifications, and a new
mechanism to wait on superblock state changes.
This unblocks work to ultimately limit the number of writers to a
block device. Jan has already scheduled follow-up work that will be
ready for v6.7 and allows us to restrict the number of writers to a
given block device. That series builds on this work right here.
The second part contains filesystem freezing updates.
Overview:
The generic superblock changes are rougly organized as follows
(ignoring additional minor cleanups):
(1) Removal of the bd_super member from struct block_device.
This was a very odd back pointer to struct super_block with
unclear rules. For all relevant places we have other means to get
the same information so just get rid of this.
(2) Simplify rules for superblock cleanup.
Roughly, everything that is allocated during fs_context
initialization and that's stored in fs_context->s_fs_info needs
to be cleaned up by the fs_context->free() implementation before
the superblock allocation function has been called successfully.
After sget_fc() returned fs_context->s_fs_info has been
transferred to sb->s_fs_info at which point sb->kill_sb() if
fully responsible for cleanup. Adhering to these rules means that
cleanup of sb->s_fs_info in fill_super() is to be avoided as it's
brittle and inconsistent.
Cleanup shouldn't be duplicated between sb->put_super() as
sb->put_super() is only called if sb->s_root has been set aka
when the filesystem has been successfully born (SB_BORN). That
complexity should be avoided.
This also means that block devices are to be closed in
sb->kill_sb() instead of sb->put_super(). More details in the
lower section.
(3) Make it possible to lookup or create a superblock before opening
block devices
There's a subtle dependency on (2) as some filesystems did rely
on fill_super() to be called in order to correctly clean up
sb->s_fs_info. All these filesystems have been fixed.
(4) Switch most filesystem to follow the same logic as the generic
mount code now does as outlined in (3).
(5) Use the superblock as the holder of the block device. We can now
easily go back from block device to owning superblock.
(6) Export and extend the generic fs_holder_ops and use them as
holder ops everywhere and remove the filesystem specific holder
ops.
(7) Call from the block layer up into the filesystem layer when the
block device is removed, allowing to shut down the filesystem
without risk of deadlocks.
(8) Get rid of get_super().
We can now easily go back from the block device to owning
superblock and can call up from the block layer into the
filesystem layer when the device is removed. So no need to wade
through all registered superblock to find the owning superblock
anymore"
Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/
* tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits)
super: use higher-level helper for {freeze,thaw}
super: wait until we passed kill super
super: wait for nascent superblocks
super: make locking naming consistent
super: use locking helpers
fs: simplify invalidate_inodes
fs: remove get_super
block: call into the file system for ioctl BLKFLSBUF
block: call into the file system for bdev_mark_dead
block: consolidate __invalidate_device and fsync_bdev
block: drop the "busy inodes on changed media" log message
dasd: also call __invalidate_device when setting the device offline
amiflop: don't call fsync_bdev in FDFMTBEG
floppy: call disk_force_media_change when changing the format
block: simplify the disk_force_media_change interface
nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl
xfs use fs_holder_ops for the log and RT devices
xfs: drop s_umount over opening the log and RT devices
ext4: use fs_holder_ops for the log device
ext4: drop s_umount over opening the log device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual miscellaneous features, cleanups, and fixes
for vfs and individual filesystems.
Features:
- Block mode changes on symlinks and rectify our broken semantics
- Report file modifications via fsnotify() for splice
- Allow specifying an explicit timeout for the "rootwait" kernel
command line option. This allows to timeout and reboot instead of
always waiting indefinitely for the root device to show up
- Use synchronous fput for the close system call
Cleanups:
- Get rid of open-coded lockdep workarounds for async io submitters
and replace it all with a single consolidated helper
- Simplify epoll allocation helper
- Convert simple_write_begin and simple_write_end to use a folio
- Convert page_cache_pipe_buf_confirm() to use a folio
- Simplify __range_close to avoid pointless locking
- Disable per-cpu buffer head cache for isolated cpus
- Port ecryptfs to kmap_local_page() api
- Remove redundant initialization of pointer buf in pipe code
- Unexport the d_genocide() function which is only used within core
vfs
- Replace printk(KERN_ERR) and WARN_ON() with WARN()
Fixes:
- Fix various kernel-doc issues
- Fix refcount underflow for eventfds when used as EFD_SEMAPHORE
- Fix a mainly theoretical issue in devpts
- Check the return value of __getblk() in reiserfs
- Fix a racy assert in i_readcount_dec
- Fix integer conversion issues in various functions
- Fix LSM security context handling during automounts that prevented
NFS superblock sharing"
* tag 'v6.6-vfs.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (39 commits)
cachefiles: use kiocb_{start,end}_write() helpers
ovl: use kiocb_{start,end}_write() helpers
aio: use kiocb_{start,end}_write() helpers
io_uring: use kiocb_{start,end}_write() helpers
fs: create kiocb_{start,end}_write() helpers
fs: add kerneldoc to file_{start,end}_write() helpers
io_uring: rename kiocb_end_write() local helper
splice: Convert page_cache_pipe_buf_confirm() to use a folio
libfs: Convert simple_write_begin and simple_write_end to use a folio
fs/dcache: Replace printk and WARN_ON by WARN
fs/pipe: remove redundant initialization of pointer buf
fs: Fix kernel-doc warnings
devpts: Fix kernel-doc warnings
doc: idmappings: fix an error and rephrase a paragraph
init: Add support for rootwait timeout parameter
vfs: fix up the assert in i_readcount_dec
fs: Fix one kernel-doc comment
docs: filesystems: idmappings: clarify from where idmappings are taken
fs/buffer.c: disable per-CPU buffer_head cache for isolated CPUs
vfs, security: Fix automount superblock LSM init problem, preventing NFS sb sharing
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull libfs and tmpfs updates from Christian Brauner:
"This cycle saw a lot of work for tmpfs that required changes to the
vfs layer. Andrew, Hugh, and I decided to take tmpfs through vfs this
cycle. Things will go back to mm next cycle.
Features
========
- By far the biggest work is the quota support for tmpfs. New tmpfs
quota infrastructure is added to support it and a new QFMT_SHMEM
uapi option is exposed.
This offers user and group quotas to tmpfs (project quotas will be
added later). Similar to other filesystems tmpfs quota are not
supported within user namespaces yet.
- Add support for user xattrs. While tmpfs already supports security
xattrs (security.*) and POSIX ACLs for a long time it lacked
support for user xattrs (user.*). With this pull request tmpfs will
be able to support a limited number of user xattrs.
This is accompanied by a fix (see below) to limit persistent simple
xattr allocations.
- Add support for stable directory offsets. Currently tmpfs relies on
the libfs provided cursor-based mechanism for readdir. This causes
issues when a tmpfs filesystem is exported via NFS.
NFS clients do not open directories. Instead, each server-side
readdir operation opens the directory, reads it, and then closes
it. Since the cursor state for that directory is associated with
the opened file it is discarded after each readdir operation. Such
directory offsets are not just cached by NFS clients but also
various userspace libraries based on these clients.
As it stands there is no way to invalidate the caches when
directory offsets have changed and the whole application depends on
unchanging directory offsets.
At LSFMM we discussed how to solve this problem and decided to
support stable directory offsets. libfs now allows filesystems like
tmpfs to use an xarrary to map a directory offset to a dentry. This
mechanism is currently only used by tmpfs but can be supported by
others as well.
Fixes
=====
- Change persistent simple xattrs allocations in libfs from
GFP_KERNEL to GPF_KERNEL_ACCOUNT so they're subject to memory
cgroup limits. Since this is a change to libfs it affects both
tmpfs and kernfs.
- Correctly verify {g,u}id mount options.
A new filesystem context is created via fsopen() which records the
namespace that becomes the owning namespace of the superblock when
fsconfig(FSCONFIG_CMD_CREATE) is called for filesystems that are
mountable in namespaces. However, fsconfig() calls can occur in a
namespace different from the namespace where fsopen() has been
called.
Currently, when fsconfig() is called to set {g,u}id mount options
the requested {g,u}id is mapped into a k{g,u}id according to the
namespace where fsconfig() was called from. The resulting k{g,u}id
is not guaranteed to be resolvable in the namespace of the
filesystem (the one that fsopen() was called in).
This means it's possible for an unprivileged user to create files
owned by any group in a tmpfs mount since it's possible to set the
setid bits on the tmpfs directory.
The contract for {g,u}id mount options and {g,u}id values in
general set from userspace has always been that they are translated
according to the caller's idmapping. In so far, tmpfs has been
doing the correct thing. But since tmpfs is mountable in
unprivileged contexts it is also necessary to verify that the
resulting {k,g}uid is representable in the namespace of the
superblock to avoid such bugs.
The new mount api's cross-namespace delegation abilities are
already widely used. Having talked to a bunch of userspace this is
the most faithful solution with minimal regression risks"
* tag 'v6.6-vfs.tmpfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
tmpfs,xattr: GFP_KERNEL_ACCOUNT for simple xattrs
mm: invalidation check mapping before folio_contains
tmpfs: trivial support for direct IO
tmpfs,xattr: enable limited user extended attributes
tmpfs: track free_ispace instead of free_inodes
xattr: simple_xattr_set() return old_xattr to be freed
tmpfs: verify {g,u}id mount options correctly
shmem: move spinlock into shmem_recalc_inode() to fix quota support
libfs: Remove parent dentry locking in offset_iterate_dir()
libfs: Add a lock class for the offset map's xa_lock
shmem: stable directory offsets
shmem: Refactor shmem_symlink()
libfs: Add directory operations for stable offsets
shmem: fix quota lock nesting in huge hole handling
shmem: Add default quota limit mount options
shmem: quota support
shmem: prepare shmem quota infrastructure
quota: Check presence of quota operation structures instead of ->quota_read and ->quota_write callbacks
shmem: make shmem_get_inode() return ERR_PTR instead of NULL
shmem: make shmem_inode_acct_block() return error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs timestamp updates from Christian Brauner:
"This adds VFS support for multi-grain timestamps and converts tmpfs,
xfs, ext4, and btrfs to use them. This carries acks from all relevant
filesystems.
The VFS always uses coarse-grained timestamps when updating the ctime
and mtime after a change. This has the benefit of allowing filesystems
to optimize away a lot of metadata updates, down to around 1 per
jiffy, even when a file is under heavy writes.
Unfortunately, this has always been an issue when we're exporting via
NFSv3, which relies on timestamps to validate caches. A lot of changes
can happen in a jiffy, so timestamps aren't sufficient to help the
client decide to invalidate the cache.
Even with NFSv4, a lot of exported filesystems don't properly support
a change attribute and are subject to the same problems with timestamp
granularity. Other applications have similar issues with timestamps
(e.g., backup applications).
If we were to always use fine-grained timestamps, that would improve
the situation, but that becomes rather expensive, as the underlying
filesystem would have to log a lot more metadata updates.
This introduces fine-grained timestamps that are used when they are
actively queried.
This uses the 31st bit of the ctime tv_nsec field to indicate that
something has queried the inode for the mtime or ctime. When this flag
is set, on the next mtime or ctime update, the kernel will fetch a
fine-grained timestamp instead of the usual coarse-grained one.
As POSIX generally mandates that when the mtime changes, the ctime
must also change the kernel always stores normalized ctime values, so
only the first 30 bits of the tv_nsec field are ever used.
Filesytems can opt into this behavior by setting the FS_MGTIME flag in
the fstype. Filesystems that don't set this flag will continue to use
coarse-grained timestamps.
Various preparatory changes, fixes and cleanups are included:
- Fixup all relevant places where POSIX requires updating ctime
together with mtime. This is a wide-range of places and all
maintainers provided necessary Acks.
- Add new accessors for inode->i_ctime directly and change all
callers to rely on them. Plain accesses to inode->i_ctime are now
gone and it is accordingly rename to inode->__i_ctime and commented
as requiring accessors.
- Extend generic_fillattr() to pass in a request mask mirroring in a
sense the statx() uapi. This allows callers to pass in a request
mask to only get a subset of attributes filled in.
- Rework timestamp updates so it's possible to drop the @now
parameter the update_time() inode operation and associated helpers.
- Add inode_update_timestamps() and convert all filesystems to it
removing a bunch of open-coding"
* tag 'v6.6-vfs.ctime' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (107 commits)
btrfs: convert to multigrain timestamps
ext4: switch to multigrain timestamps
xfs: switch to multigrain timestamps
tmpfs: add support for multigrain timestamps
fs: add infrastructure for multigrain timestamps
fs: drop the timespec64 argument from update_time
xfs: have xfs_vn_update_time gets its own timestamp
fat: make fat_update_time get its own timestamp
fat: remove i_version handling from fat_update_time
ubifs: have ubifs_update_time use inode_update_timestamps
btrfs: have it use inode_update_timestamps
fs: drop the timespec64 arg from generic_update_time
fs: pass the request_mask to generic_fillattr
fs: remove silly warning from current_time
gfs2: fix timestamp handling on quota inodes
fs: rename i_ctime field to __i_ctime
selinux: convert to ctime accessor functions
security: convert to ctime accessor functions
apparmor: convert to ctime accessor functions
sunrpc: convert to ctime accessor functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull mount API updates from Christian Brauner:
"This introduces FSCONFIG_CMD_CREATE_EXCL which allows userspace to
implement something like
$ mount -t ext4 --exclusive /dev/sda /B
which fails if a superblock for the requested filesystem does already
exist instead of silently reusing an existing superblock.
Without it, in the sequence
$ move-mount -f xfs -o source=/dev/sda4 /A
$ move-mount -f xfs -o noacl,source=/dev/sda4 /B
the initial mounter will create a superblock. The second mounter will
reuse the existing superblock, creating a bind-mount (see [1] for the
source of the move-mount binary).
The problem is that reusing an existing superblock means all mount
options other than read-only and read-write will be silently ignored
even if they are incompatible requests. For example, the second mount
has requested no POSIX ACL support but since the existing superblock
is reused POSIX ACL support will remain enabled.
Such silent superblock reuse can easily become a security issue.
After adding support for FSCONFIG_CMD_CREATE_EXCL to mount(8) in
util-linux this can be fixed:
$ move-mount -f xfs --exclusive -o source=/dev/sda4 /A
$ move-mount -f xfs --exclusive -o noacl,source=/dev/sda4 /B
Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed
This requires the new mount api. With the old mount api it would be
necessary to plumb this through every legacy filesystem's
file_system_type->mount() method. If they want this feature they are
most welcome to switch to the new mount api"
Link: https://github.com/brauner/move-mount-beneath [1]
Link: https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner
Link: https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner
Link: https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner
Link: https://lore.kernel.org/lkml/20230824-anzog-allheilmittel-e8c63e429a79@brauner/
* tag 'v6.6-vfs.fs_context' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: add FSCONFIG_CMD_CREATE_EXCL
fs: add vfs_cmd_reconfigure()
fs: add vfs_cmd_create()
super: remove get_tree_single_reconf()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull OPP updates for 6.6 from Viresh Kumar:
"- Minor core cleanup and addition of new frequency related APIs (Viresh
Kumar and Manivannan Sadhasivam).
- Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)."
* tag 'opp-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
dt-bindings: cpufreq: Convert ti-cpufreq to json schema
dt-bindings: opp: Convert ti-omap5-opp-supply to json schema
OPP: Fix argument name in doc comment
dt-bindings: opp: Increase maxItems for opp-hz property
OPP: Fix passing 0 to PTR_ERR in _opp_attach_genpd()
OPP: Fix potential null ptr dereference in dev_pm_opp_get_required_pstate()
OPP: Reuse dev_pm_opp_get_freq_indexed()
OPP: Update _read_freq() to return the correct frequency
OPP: Add dev_pm_opp_find_freq_exact_indexed()
OPP: Introduce dev_pm_opp_get_freq_indexed() API
OPP: Introduce dev_pm_opp_find_freq_{ceil/floor}_indexed() APIs
OPP: Rearrange entries in pm_opp.h
|
|
Merge ARM cpufreq updates for 6.6:
- Migrate various platforms to use remove callback returning void
(Yangtao Li).
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta).
- Explicitly include correct DT includes (Rob Herring).
- Frequency domain updates for qcom-hw driver (Neil Armstrong).
- Modify AMD pstate driver return the highest_perf value (Meng Li).
- Generic cleanups for cppc, mediatek and powernow driver (Liao Chang,
Konrad Dybcio).
- Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino
Del Regno, Konrad Dybcio).
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva).
* pm-cpufreq: (33 commits)
cpufreq: tegra194: remove opp table in exit hook
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
cpufreq: tegra194: add online/offline hooks
cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
cpufreq: Prefer to print cpuid in MIN/MAX QoS register error message
cpufreq: amd-pstate-ut: Modify the function to get the highest_perf value
cpufreq: mediatek-hw: Remove unused define
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: brcmstb-avs-cpufreq: Fix -Warray-bounds bug
cpufreq: blocklist MSM8998 in cpufreq-dt-platdev
cpufreq: omap: Convert to platform remove callback returning void
cpufreq: qoriq: Convert to platform remove callback returning void
cpufreq: acpi: Convert to platform remove callback returning void
cpufreq: tegra186: Convert to platform remove callback returning void
cpufreq: qcom-nvmem: Convert to platform remove callback returning void
cpufreq: kirkwood: Convert to platform remove callback returning void
cpufreq: pcc-cpufreq: Convert to platform remove callback returning void
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 6.6 from Viresh Kumar:
"- Migrate various platforms to use remove callback returning void
(Yangtao Li).
- Add online/offline/exit hooks for Tegra driver (Sumit Gupta).
- Explicitly include correct DT includes (Rob Herring).
- Frequency domain updates for qcom-hw driver (Neil Armstrong).
- Modify AMD pstate driver return the highest_perf value (Meng Li).
- Generic cleanups for cppc, mediatek and powernow driver (Liao Chang
and Konrad Dybcio).
- Add more platforms to cpufreq-arm driver's blocklist (AngeloGioacchino
Del Regno and Konrad Dybcio).
- brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)."
* tag 'cpufreq-arm-updates-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (33 commits)
cpufreq: tegra194: remove opp table in exit hook
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
cpufreq: tegra194: add online/offline hooks
cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
cpufreq: Prefer to print cpuid in MIN/MAX QoS register error message
cpufreq: amd-pstate-ut: Modify the function to get the highest_perf value
cpufreq: mediatek-hw: Remove unused define
cpufreq: blocklist more Qualcomm platforms in cpufreq-dt-platdev
cpufreq: brcmstb-avs-cpufreq: Fix -Warray-bounds bug
cpufreq: blocklist MSM8998 in cpufreq-dt-platdev
cpufreq: omap: Convert to platform remove callback returning void
cpufreq: qoriq: Convert to platform remove callback returning void
cpufreq: acpi: Convert to platform remove callback returning void
cpufreq: tegra186: Convert to platform remove callback returning void
cpufreq: qcom-nvmem: Convert to platform remove callback returning void
cpufreq: kirkwood: Convert to platform remove callback returning void
cpufreq: pcc-cpufreq: Convert to platform remove callback returning void
...
|
|
|
|
Add exit hook and remove OPP table when the device gets unregistered.
This will fix the error messages when the CPU FREQ driver module is
removed and then re-inserted. It also fixes these messages while
onlining the first CPU from a policy whose all CPU's were previously
offlined.
debugfs: File 'cpu5' in directory 'opp' already present!
debugfs: File 'cpu6' in directory 'opp' already present!
debugfs: File 'cpu7' in directory 'opp' already present!
Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth")
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
[ Viresh: Dropped irrelevant change from it ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Fix for Loongsoon eiointc init error handling
- Fix a bunch of warning showing up when -Wmissing-prototypes is set
- A set of fixes for drivers checking for 0 as a potential return
value from platform_get_irq()
- Another set of patches converting existing code to the use of helpers
such as of_address_count() and devm_platform_get_and_ioremap_resource()
- A tree-wide cleanup of drivers including of_*.h without discrimination
- Added support for the Amlogic C3 SoCs
Link: https://lore.kernel.org/lkml/20230828091543.4001857-1-maz@kernel.org
|
|
Since the 'cpus' field of policy structure will become empty in the
cpufreq core API, it is better to use 'related_cpus' in the exit()
callback of driver.
Fixes: c3274763bfc3 ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
Implement the light-weight tear down and bring up helpers to reduce the
amount of work to do on CPU offline/online operation.
This change helps to make the hotplugging paths much faster.
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Link: https://lore.kernel.org/lkml/20230816033402.3abmugb5goypvllm@vireshk-i7/
[ Viresh: Fixed rebase conflict ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small driver fixes and one larger unused function set removal in
the raid class (so no external impact)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: snic: Fix double free in snic_tgt_create()
scsi: core: raid_class: Remove raid_component_add()
scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5
scsi: ufs: mcq: Fix the search/wrap around logic
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix an FPU invalidation bug on exec(), and fix a performance
regression due to a missing setting of X86_FEATURE_OSXSAVE"
* tag 'x86-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Set X86_FEATURE_OSXSAVE feature after enabling OSXSAVE in CR4
x86/fpu: Invalidate FPU state correctly on exec()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A last minute fix for a regression introduced in the v6.5 merge
window.
The conversion of the software based interrupt resend mechanism to
hlist missed to add a check whether the descriptor is already enqueued
and dropped the interrupt descriptor lookup for nested interrupts.
The missing check whether the descriptor is already queued causes
hlist corruption and can be observed in the wild. The dropped parent
descriptor lookup has not yet caused problems, but it would result in
stale interrupt line in the worst case.
Add the missing enqueued check and bring the descriptor lookup back to
cure this"
* tag 'irq-urgent-2023-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Fix software resend lockup and nested resend
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix a ptrace bug, a hw_breakpoint bug, some build errors/warnings and
some trivial cleanups"
* tag 'loongarch-fixes-6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Fix hw_breakpoint_control() for watchpoints
LoongArch: Ensure FP/SIMD registers in the core dump file is up to date
LoongArch: Put the body of play_dead() into arch_cpu_idle_dead()
LoongArch: Add identifier names to arguments of die() declaration
LoongArch: Return earlier in die() if notify_die() returns NOTIFY_STOP
LoongArch: Do not kill the task in die() if notify_die() returns NOTIFY_STOP
LoongArch: Remove <asm/export.h>
LoongArch: Replace #include <asm/export.h> with #include <linux/export.h>
LoongArch: Remove unneeded #include <asm/export.h>
LoongArch: Replace -ffreestanding with finer-grained -fno-builtin's
LoongArch: Remove redundant "source drivers/firmware/Kconfig"
|
|
The switch to using hlist for managing software resend of interrupts
broke resend in at least two ways:
First, unconditionally adding interrupt descriptors to the resend list can
corrupt the list when the descriptor in question has already been
added. This causes the resend tasklet to loop indefinitely with interrupts
disabled as was recently reported with the Lenovo ThinkPad X13s after
threaded NAPI was disabled in the ath11k WiFi driver.
This bug is easily fixed by restoring the old semantics of irq_sw_resend()
so that it can be called also for descriptors that have already been marked
for resend.
Second, the offending commit also broke software resend of nested
interrupts by simply discarding the code that made sure that such
interrupts are retriggered using the parent interrupt.
Add back the corresponding code that adds the parent descriptor to the
resend list.
Fixes: bc06a9e08742 ("genirq: Use hlist for managing resend handlers")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/lkml/20230809073432.4193-1-johan+linaro@kernel.org/
Link: https://lore.kernel.org/r/20230826154004.1417-1-johan+linaro@kernel.org
|
|
In hw_breakpoint_control(), encode_ctrl_reg() has already encoded the
MWPnCFG3_LoadEn/MWPnCFG3_StoreEn bits in info->ctrl. We don't need to
add (1 << MWPnCFG3_LoadEn | 1 << MWPnCFG3_StoreEn) unconditionally.
Otherwise we can't set read watchpoint and write watchpoint separately.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
This is a port of commit 379eb01c21795edb4c ("riscv: Ensure the value
of FP registers in the core dump file is up to date").
The values of FP/SIMD registers in the core dump file come from the
thread.fpu. However, kernel saves the FP/SIMD registers only before
scheduling out the process. If no process switch happens during the
exception handling, kernel will not have a chance to save the latest
values of FP/SIMD registers. So it may cause their values in the core
dump file incorrect. To solve this problem, force fpr_get()/simd_get()
to save the FP/SIMD registers into the thread.fpu if the target task
equals the current task.
Cc: stable@vger.kernel.org
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Commit e6bcfdd75d53 ("x86/microcode: Hide the config knob") removed the
MICROCODE_AMD config, but left some references in defconfigs and comments,
that have no effect on any kernel build around.
Clean up those remaining config references. No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230825141226.13566-1-lukas.bulwahn@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"One clk driver fix and two clk framework fixes:
- Fix an OOB access when devm_get_clk_from_child() is used and
devm_clk_release() casts the void pointer to the wrong type
- Move clk_rate_exclusive_{get,put}() within the correct ifdefs in
clk.h so that the stubs are used when CONFIG_COMMON_CLK=n
- Register the proper clk provider function depending on the value of
#clock-cells in the TI keystone driver"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: Fix slab-out-of-bounds error in devm_clk_release()
clk: Fix undefined reference to `clk_rate_exclusive_{get,put}'
clk: keystone: syscon-clk: Fix audio refclk
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS
(for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct dm_verity_loadpin_trusted_root_digest.
Additionally, since the element count member must be set before accessing
the annotated flexible array member, move its initialization earlier.
[1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: dm-devel@redhat.com
Cc: Paul Moore <paul@paul-moore.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: linux-security-module@vger.kernel.org
Link: https://lore.kernel.org/r/20230817235955.never.762-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
All users of cleanup_symbol_name() do not use the return value.
So let us change the return value of cleanup_symbol_name() to
'void' to reflect its usage pattern.
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20230825202036.441212-1-yonghong.song@linux.dev
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
The gcc compiler translates on some architectures the 64-bit
__builtin_clzll() function to a call to the libgcc function __clzdi2(),
which should take a 64-bit parameter on 32- and 64-bit platforms.
But in the current kernel code, the built-in __clzdi2() function is
defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG ==
32, thus the return values on 32-bit kernels are in the range from
[0..31] instead of the expected [0..63] range.
This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to
take a 64-bit parameter on 32-bit kernels as well, thus it makes the
functions identical for 32- and 64-bit kernels.
This bug went unnoticed since kernel 3.11 for over 10 years, and here
are some possible reasons for that:
a) Some architectures have assembly instructions to count the bits and
which are used instead of calling __clzdi2(), e.g. on x86 the bsr
instruction and on ppc cntlz is used. On such architectures the
wrong __clzdi2() implementation isn't used and as such the bug has
no effect and won't be noticed.
b) Some architectures link to libgcc.a, and the in-kernel weak
functions get replaced by the correct 64-bit variants from libgcc.a.
c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many
places in the kernel, and most likely only in uncritical functions,
e.g. when printing hex values via seq_put_hex_ll(). The wrong return
value will still print the correct number, but just in a wrong
formatting (e.g. with too many leading zeroes).
d) 32-bit kernels aren't used that much any longer, so they are less
tested.
A trivial testcase to verify if the currently running 32-bit kernel is
affected by the bug is to look at the output of /proc/self/maps:
Here the kernel uses a correct implementation of __clzdi2():
root@debian:~# cat /proc/self/maps
00010000-00019000 r-xp 00000000 08:05 787324 /usr/bin/cat
00019000-0001a000 rwxp 00009000 08:05 787324 /usr/bin/cat
0001a000-0003b000 rwxp 00000000 00:00 0 [heap]
f7551000-f770d000 r-xp 00000000 08:05 794765 /usr/lib/hppa-linux-gnu/libc.so.6
...
and this kernel uses the broken implementation of __clzdi2():
root@debian:~# cat /proc/self/maps
0000000010000-0000000019000 r-xp 00000000 000000008:000000005 787324 /usr/bin/cat
0000000019000-000000001a000 rwxp 000000009000 000000008:000000005 787324 /usr/bin/cat
000000001a000-000000003b000 rwxp 00000000 00:00 0 [heap]
00000000f73d1000-00000000f758d000 r-xp 00000000 000000008:000000005 794765 /usr/lib/hppa-linux-gnu/libc.so.6
...
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 4df87bb7b6a22 ("lib: add weak clz/ctz functions")
Cc: Chanho Min <chanho.min@lge.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Merge devfreq changes and power management tools changes for 6.6-rc1:
- Fix memory leak in devfreq_dev_release() (Boris Brezillon).
- Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
Sadhasivam).
- Explicitly include correct DT includes in devfreq (Rob Herring).
- Add turbo-boost support to cpupower (Wyes Karny).
- Add support for amd_pstate mode change to cpupower (Wyes Karny).
- Fix 'cpupower idle_set' command to accept only numeric values of
arguments (Likhitha Korrapati).
* pm-devfreq:
PM / devfreq: Fix leak in devfreq_dev_release()
PM / devfreq: Reword the kernel-doc comment for devfreq_monitor_start() API
PM / devfreq: Explicitly include correct DT includes
* pm-tools:
cpupower: Fix cpuidle_set to accept only numeric values for idle-set operation.
cpupower: Add turbo-boost support in cpupower
cpupower: Add support for amd_pstate mode change
cpupower: Add EPP value change support
cpupower: Add is_valid_path API
cpupower: Recognise amd-pstate active mode driver
cpupower: Bump soname version
|
|
Merge system-wide power management changes and power capping updates
for 6.6-rc1:
- Add device PM helpers to allow a device to remain powered-on during
system-wide transitions (Ulf Hansson).
- Rework hibernation memory snapshotting to avoid storing pages filled
with zeros in hibernation image files (Brian Geffon).
- Add check to make sure that CPU latency QoS constraints do not use
negative values (Clive Lin).
- Optimize rp->domains memory allocation in the Intel RAPL power
capping driver (xiongxin).
- Remove recursion while parsing zones in the arm_scmi power capping
driver (Cristian Marussi).
* pm-sleep:
PM: sleep: Add helpers to allow a device to remain powered-on
PM: hibernate: don't store zero pages in the image file
* pm-qos:
PM: QoS: Add check to make sure CPU latency is non-negative
* powercap:
powercap: intel_rapl: Optimize rp->domains memory allocation
powercap: arm_scmi: Remove recursion while parsing zones
|
|
Merge CPU power management updates for 6.6-rc1:
- Rework the menu and teo cpuidle governors to avoid calling
tick_nohz_get_sleep_length(), which is likely to become quite
expensive going forward, too often and improve making decisions
regarding whether or not to stop the scheduler tick in the teo
governor (Rafael Wysocki).
- Improve the performance of cpufreq_stats_create_table() in some
cases (Liao Chang).
- Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal).
- Use clamp() helper macro to improve the code readability in
cpufreq_verify_within_limits() (Liao Chang).
- Set stale CPU frequency to minimum in intel_pstate (Doug Smythies).
* pm-cpuidle:
cpuidle: teo: Avoid unnecessary variable assignments
cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases
cpuidle: teo: Gather statistics regarding whether or not to stop the tick
cpuidle: teo: Skip tick_nohz_get_sleep_length() call in some cases
cpuidle: teo: Do not call tick_nohz_get_sleep_length() upfront
cpuidle: teo: Drop utilized from struct teo_cpu
cpuidle: teo: Avoid stopping the tick unnecessarily when bailing out
cpuidle: teo: Update idle duration estimate when choosing shallower state
* pm-cpufreq:
cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
cpufreq: amd-pstate-ut: Remove module parameter access
cpufreq: Use clamp() helper macro to improve the code readability
cpufreq: intel_pstate: set stale CPU frequency to minimum
cpufreq: stats: Improve the performance of cpufreq_stats_create_table()
|
|
Merge a PNP change for 6.6-rc1:
- Fix string truncation warning in pnpacpi_add_device() (Sunil V L).
* pnp:
PNP: ACPI: Fix string truncation warning
|
|
Merge ACPI power management updates for 6.6-rc1:
- Fix and clean up suspend-to-idle interface for AMD systems (Mario
Limonciello, Andy Shevchenko).
* acpi-pm:
ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
ACPI: x86: s2idle: Post-increment variables when getting constraints
ACPI: Adjust #ifdef for *_lps0_dev use
|
|
Merge ACPI device enumeration changes, ACPI TAD and extlog drivers
updates, and miscellaneous ACPI-related changes for 6.6-rc1:
- Defer enumeration of devices with _DEP pointing to IVSC (Wentong Wu).
- Install SystemCMOS address space handler for ACPI000E (TAD) to meet
platform firmware expectations on some platforms (Zhang Rui).
- Fix finding the generic error data in the ACPi extlog driver for
compatibility with old and new firmware interface versions (Xiaochun
Lee).
- Remove assorted unused declarations of functions (Yue Haibing).
- Move AMBA bus scan handling into arm64 specific directory (Sudeep
Holla).
* acpi-scan:
ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
* acpi-tad:
ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
* acpi-extlog:
ACPI: extlog: Fix finding the generic error data for v3 structure
* acpi-misc:
ACPI: Remove assorted unused declarations of functions
ACPI: Remove unused extern declaration acpi_paddr_to_node()
ACPI: Move AMBA bus scan handling into arm64 specific directory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 13 are cc:stable and the remainder pertain to post-6.4
issues or aren't considered suitable for a -stable backport"
* tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
shmem: fix smaps BUG sleeping while atomic
selftests: cachestat: catch failing fsync test on tmpfs
selftests: cachestat: test for cachestat availability
maple_tree: disable mas_wr_append() when other readers are possible
madvise:madvise_free_pte_range(): don't use mapcount() against large folio for sharing check
madvise:madvise_free_huge_pmd(): don't use mapcount() against large folio for sharing check
madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check
mm: multi-gen LRU: don't spin during memcg release
mm: memory-failure: fix unexpected return value in soft_offline_page()
radix tree: remove unused variable
mm: add a call to flush_cache_vmap() in vmap_pfn()
selftests/mm: FOLL_LONGTERM need to be updated to 0x100
nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
mm/gup: handle cont-PTE hugetlb pages correctly in gup_must_unshare() via GUP-fast
selftests: cgroup: fix test_kmem_basic less than error
mm: enable page walking API to lock vmas during the walk
smaps: use vm_normal_page_pmd() instead of follow_trans_huge_pmd()
mm/gup: reintroduce FOLL_NUMA as FOLL_HONOR_NUMA_FAULT
|
|
Merge ACPI thermal driver changes for 6.6-rc1:
- Drop non-functional nocrt parameter from ACPI thermal (Mario
Limonciello).
- Clean up the ACPI thermal driver, rework the handling of firmware
notifications in it and make it provide a table of generic trip point
structures to the core during initialization (Rafael Wysocki).
* acpi-thermal:
ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
ACPI: thermal: Drop unnecessary thermal zone callbacks
ACPI: thermal: Rework thermal_get_trend()
ACPI: thermal: Use trip point table to register thermal zones
thermal: core: Rework and rename __for_each_thermal_trip()
ACPI: thermal: Introduce struct acpi_thermal_trip
ACPI: thermal: Carry out trip point updates under zone lock
ACPI: thermal: Clean up acpi_thermal_register_thermal_zone()
thermal: core: Add priv pointer to struct thermal_trip
thermal: core: Introduce thermal_zone_device_exec()
thermal: core: Do not handle trip points with invalid temperature
ACPI: thermal: Drop redundant local variable from acpi_thermal_resume()
ACPI: thermal: Do not attach private data to ACPI handles
ACPI: thermal: Drop enabled flag from struct acpi_thermal_active
ACPI: thermal: Drop nocrt parameter
|
|
Merge ACPI processor driver changes for 6.6-rc1:
- Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao).
- Convert ACPI CPU initialization to using _OSC instead of _PDC that
has been depreceted since 2018 and dropped from the specification in
ACPI 6.5 (Michal Wilczynski, Rafael Wysocki).
* acpi-processor:
ACPI: processor: LoongArch: Get physical ID from MADT
ACPI: processor: Refine messages in acpi_early_processor_control_setup()
ACPI: processor: Remove acpi_hwp_native_thermal_lvt_osc()
ACPI: processor: Use _OSC to convey OSPM processor support information
ACPI: processor: Introduce acpi_processor_osc()
ACPI: processor: Set CAP_SMP_T_SWCOORD in arch_acpi_set_proc_cap_bits()
ACPI: processor: Clear C_C2C3_FFH and C_C1_FFH in arch_acpi_set_proc_cap_bits()
ACPI: processor: Rename ACPI_PDC symbols
ACPI: processor: Refactor arch_acpi_set_pdc_bits()
ACPI: processor: Move processor_physically_present() to acpi_processor.c
ACPI: processor: Move MWAIT quirk out of acpi_processor.c
|
|
Merge changes related to the ACPI bus type and ACPI backlight driver
changes for 6.6-rc1:
- Introduce new wrappers for ACPICA notify handler install/remove and
convert multiple drivers to using their own Notify() handlers instead
of the ACPI bus type .notify() slated for removal (Michal Wilczynski).
- Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2 (Hans
de Goede).
- Put ACPI video and its child devices explicitly into D0 on boot to
avoid platform firmware confusion (Kai-Heng Feng).
- Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby).
* acpi-bus:
ACPI: thermal: Install Notify() handler directly
ACPI: NFIT: Remove unnecessary .remove callback
ACPI: NFIT: Install Notify() handler directly
ACPI: HED: Install Notify() handler directly
ACPI: battery: Install Notify() handler directly
ACPI: video: Install Notify() handler directly
ACPI: AC: Install Notify() handler directly
ACPI: bus: Set driver_data to NULL every time .add() fails
ACPI: bus: Introduce wrappers for ACPICA notify handler install/remove
* acpi-video:
ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
ACPI: video: Put ACPI video and its child devices into D0 on boot
ACPI: video: Add backlight=native DMI quirk for Lenovo Ideapad Z470
|
|
Merge ACPICA material for 6.6-rc1.
This includes some fixes, cleanups and new material, mostly related to
parsing tables.
Specifics:
- Suppress a GCC 12 dangling-pointer warning (Philip Prindeville).
- Reformat the ACPI_STATE_COMMON macro and its users (George Guo).
- Replace the ternary operator with ACPI_MIN() (Jiangshan Yi).
- Add support for _DSC as per ACPI 6.5 (Saket Dumbre).
- Remove a duplicate macro from zephyr header (Najumon B.A).
- Add data structures for GED and _EVT tracking (Jose Marinho).
- Fix misspelled CDAT DSMAS define (Dave Jiang).
- Simplify an error message in acpi_ds_result_push() (Christophe
Jaillet).
- Add a struct size macro related to SRAT (Dave Jiang).
- Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar).
- Add support for RISC-V external interrupt controllers in MADT (Sunil
V L).
- Add RHCT flags, CMO and MMU nodes (Sunil V L).
- Change ACPICA version to 20230628 (Bob Moore).
* acpica:
ACPICA: Update version to 20230628
ACPICA: RHCT: Add flags, CMO and MMU nodes
ACPICA: MADT: Add RISC-V external interrupt controllers
ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer
ACPICA: Add a define for size of struct acpi_srat_generic_affinity device_handle
ACPICA: Slightly simplify an error message in acpi_ds_result_push()
ACPICA: Fix misspelled CDAT DSMAS define
ACPICA: Add interrupt command to acpiexec
ACPICA: Detect GED device and keep track of _EVT
ACPICA: fix for conflict macro definition on zephyr interface
ACPICA: Add support for _DSC as per ACPI 6.5
ACPICA: exserial.c: replace ternary operator with ACPI_MIN()
ACPICA: Modify ACPI_STATE_COMMON
ACPICA: Fix GCC 12 dangling-pointer warning
|
|
Kernel test robot reported a kallsyms_test failure when clang lto is
enabled (thin or full) and CONFIG_KALLSYMS_SELFTEST is also enabled.
I can reproduce in my local environment with the following error message
with thin lto:
[ 1.877897] kallsyms_selftest: Test for 1750th symbol failed: (tsc_cs_mark_unstable) addr=ffffffff81038090
[ 1.877901] kallsyms_selftest: abort
It appears that commit 8cc32a9bbf29 ("kallsyms: strip LTO-only suffixes
from promoted global functions") caused the failure. Commit 8cc32a9bbf29
changed cleanup_symbol_name() based on ".llvm." instead of '.' where
".llvm." is appended to a before-lto-optimization local symbol name.
We need to propagate such knowledge in kallsyms_selftest.c as well.
Further more, compare_symbol_name() in kallsyms.c needs change as well.
In scripts/kallsyms.c, kallsyms_names and kallsyms_seqs_of_names are used
to record symbol names themselves and index to symbol names respectively.
For example:
kallsyms_names:
...
__amd_smn_rw._entry <== seq 1000
__amd_smn_rw._entry.5 <== seq 1001
__amd_smn_rw.llvm.<hash> <== seq 1002
...
kallsyms_seqs_of_names are sorted based on cleanup_symbol_name() through, so
the order in kallsyms_seqs_of_names actually has
index 1000: seq 1002 <== __amd_smn_rw.llvm.<hash> (actual symbol comparison using '__amd_smn_rw')
index 1001: seq 1000 <== __amd_smn_rw._entry
index 1002: seq 1001 <== __amd_smn_rw._entry.5
Let us say at a particular point, at index 1000, symbol '__amd_smn_rw.llvm.<hash>'
is comparing to '__amd_smn_rw._entry' where '__amd_smn_rw._entry' is the one to
search e.g., with function kallsyms_on_each_match_symbol(). The current implementation
will find out '__amd_smn_rw._entry' is less than '__amd_smn_rw.llvm.<hash>' and
then continue to search e.g., index 999 and never found a match although the actual
index 1001 is a match.
To fix this issue, let us do cleanup_symbol_name() first and then do comparison.
In the above case, comparing '__amd_smn_rw' vs '__amd_smn_rw._entry' and
'__amd_smn_rw._entry' being greater than '__amd_smn_rw', the next comparison will
be > index 1000 and eventually index 1001 will be hit an a match is found.
For any symbols not having '.llvm.' substr, there is no functionality change
for compare_symbol_name().
Fixes: 8cc32a9bbf29 ("kallsyms: strip LTO-only suffixes from promoted global functions")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308232200.1c932a90-oliver.sang@intel.com
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Song Liu <song@kernel.org>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230825034659.1037627-1-yonghong.song@linux.dev
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This is obviously not ideal, particularly for something this late in
the cycle.
Unfortunately we found some uABI issues in the vector support while
reviewing the GDB port, which has triggered a revert -- probably a
good sign we should have reviewed GDB before merging this, I guess I
just dropped the ball because I was so worried about the context
extension and libc suff I forgot. Hence the late revert.
There's some risk here as we're still exposing the vector context for
signal handlers, but changing that would have meant reverting all of
the vector support. The issues we've found so far have been fixed
already and they weren't absolute showstoppers, so we're essentially
just playing it safe by holding ptrace support for another release (or
until we get through a proper userspace code review).
Summary:
- The vector ucontext extension has been extended with vlenb
- The vector registers ELF core dump note type has been changed to
avoid aliasing with the CSR type used in embedded systems
- Support for accessing vector registers via ptrace() has been
reverted
- Another build fix for the ISA spec changes around Zifencei/Zicsr
that manifests on some systems built with binutils-2.37 and
gcc-11.2"
* tag 'riscv-for-linus-6.5-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix build errors using binutils2.37 toolchains
RISC-V: vector: export VLENB csr in __sc_riscv_v_state
RISC-V: Remove ptrace support for vectors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix an irq mapping leak in gpio-sim
- associate the GPIO device's software node with the irq domain in
gpio-sim
* tag 'gpio-fixes-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: pass the GPIO device's software node to irq domain
gpio: sim: dispose of irq mappings before destroying the irq_sim domain
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here are some Renesas and AMD driver fixes, the AMD fix affects
important laptops in the wild so this one is pretty important. It
seems a bit tough to get this right.
- Fix DT parsing and related locking in the Renesas driver.
- Fix wakeup IRQs in the AMD driver once again. Really tricky this
one"
* tag 'pinctrl-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: amd: Mask wake bits on probe again
pinctrl: renesas: rza2: Add lock around pinctrl_generic{{add,remove}_group,{add,remove}_function}
pinctrl: renesas: rzv2m: Fix NULL pointer dereference in rzv2m_dt_subnode_to_map()
pinctrl: renesas: rzg2l: Fix NULL pointer dereference in rzg2l_dt_subnode_to_map()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Hopefully the last bits for 6.5. It's slightly higher LOCs than
wished, but it doesn't look scary.
The biggest change is MAINTAINERS update for TI; it's good to have the
update before the final release, so that people can contact to the
right persons for bug reports (which shouldn't happen of course!)
The rest are all device-specific fixes and quirks, most for various
ASoC platforms"
* tag 'sound-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: yc: Fix a non-functional mic on Lenovo 82SJ
ALSA: ymfpci: Fix the missing snd_card_free() call at probe error
ASoC: cs35l41: Correct amp_gain_tlv values
ASoC: amd: yc: Add VivoBook Pro 15 to quirks list for acp6x
ASoC: tas2781: fixed register access error when switching to other chips
ASoC: cs35l56: Add an ACPI match table
ASoC: cs35l56: Read firmware uuid from a device property instead of _SUB
ASoC: SOF: ipc4-pcm: fix possible null pointer deference
MAINTAINERS: Add entries for TEXAS INSTRUMENTS ASoC DRIVERS
|
|
The initial aim is to silence the following objtool warning:
arch/loongarch/kernel/process.o: warning: objtool: arch_cpu_idle_dead() falls through to next function start_thread()
According to tools/objtool/Documentation/objtool.txt, this is because
the last instruction of arch_cpu_idle_dead() is a call to a noreturn
function play_dead(). In order to silence the warning, one simple way
is to add the noreturn function play_dead() to objtool's hard-coded
global_noreturns array, that is to say, just put "NORETURN(play_dead)"
into tools/objtool/noreturns.h, it works well.
But I noticed that play_dead() is only defined once and only called by
arch_cpu_idle_dead(), so put the body of play_dead() into the caller
arch_cpu_idle_dead(), then remove the noreturn function play_dead() is
an alternative way which can reduce the overhead of the function call
at the same time.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
Add identifier names to arguments of die() declaration in ptrace.h
to fix the following checkpatch warnings:
WARNING: function definition argument 'const char *' should also have an identifier name
WARNING: function definition argument 'struct pt_regs *' should also have an identifier name
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
After the call to oops_exit(), it should not panic or execute
the crash kernel if the oops is to be suppressed.
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
If notify_die() returns NOTIFY_STOP, honor the return value from the
handler chain invocation in die() and return without killing the task
as, through a debugger, the fault may have been fixed. It makes sense
even if ignoring the event will make the system unstable: by allowing
access through a debugger it has been compromised already anyway. It
makes our port consistent with x86, arm64, riscv and csky.
Commit 20c0d2d44029 ("[PATCH] i386: pass proper trap numbers to die
chain handlers") may be the earliest of similar changes.
Link: https://lore.kernel.org/r/43DDF02E.76F0.0078.0@novell.com/
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
All *.S files under arch/loongarch/ have been converted to include
<linux/export.h> instead of <asm/export.h>.
Remove <asm/export.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
