| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Tasks without a user-defined clamp value are considered not clamped
and by default their utilization can have any value in the
[0..SCHED_CAPACITY_SCALE] range.
Tasks with a user-defined clamp value are allowed to request any value
in that range, and the required clamp is unconditionally enforced.
However, a "System Management Software" could be interested in limiting
the range of clamp values allowed for all tasks.
Add a privileged interface to define a system default configuration via:
/proc/sys/kernel/sched_uclamp_util_{min,max}
which works as an unconditional clamp range restriction for all tasks.
With the default configuration, the full SCHED_CAPACITY_SCALE range of
values is allowed for each clamp index. Otherwise, the task-specific
clamp is capped by the corresponding system default value.
Do that by tracking, for each task, the "effective" clamp value and
bucket the task has been refcounted in at enqueue time. This
allows to lazy aggregate "requested" and "system default" values at
enqueue time and simplifies refcounting updates at dequeue time.
The cached bucket ids are used to avoid (relatively) more expensive
integer divisions every time a task is enqueued.
An active flag is used to report when the "effective" value is valid and
thus the task is actually refcounted in the corresponding rq's bucket.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-5-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When a task sleeps it removes its max utilization clamp from its CPU.
However, the blocked utilization on that CPU can be higher than the max
clamp value enforced while the task was running. This allows undesired
CPU frequency increases while a CPU is idle, for example, when another
CPU on the same frequency domain triggers a frequency update, since
schedutil can now see the full not clamped blocked utilization of the
idle CPU.
Fix this by using:
uclamp_rq_dec_id(p, rq, UCLAMP_MAX)
uclamp_rq_max_value(rq, UCLAMP_MAX, clamp_value)
to detect when a CPU has no more RUNNABLE clamped tasks and to flag this
condition.
Don't track any minimum utilization clamps since an idle CPU never
requires a minimum frequency. The decay of the blocked utilization is
good enough to reduce the CPU frequency.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-4-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Because of bucketization, different task-specific clamp values are
tracked in the same bucket. For example, with 20% bucket size and
assuming to have:
Task1: util_min=25%
Task2: util_min=35%
both tasks will be refcounted in the [20..39]% bucket and always boosted
only up to 20% thus implementing a simple floor aggregation normally
used in histograms.
In systems with only few and well-defined clamp values, it would be
useful to track the exact clamp value required by a task whenever
possible. For example, if a system requires only 23% and 47% boost
values then it's possible to track the exact boost required by each
task using only 3 buckets of ~33% size each.
Introduce a mechanism to max aggregate the requested clamp values of
RUNNABLE tasks in the same bucket. Keep it simple by resetting the
bucket value to its base value only when a bucket becomes inactive.
Allow a limited and controlled overboosting margin for tasks recounted
in the same bucket.
In systems where the boost values are not known in advance, it is still
possible to control the maximum acceptable overboosting margin by tuning
the number of clamp groups. For example, 20 groups ensure a 5% maximum
overboost.
Remove the rq bucket initialization code since a correct bucket value
is now computed when a task is refcounted into a CPU's rq.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-3-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Utilization clamping allows to clamp the CPU's utilization within a
[util_min, util_max] range, depending on the set of RUNNABLE tasks on
that CPU. Each task references two "clamp buckets" defining its minimum
and maximum (util_{min,max}) utilization "clamp values". A CPU's clamp
bucket is active if there is at least one RUNNABLE tasks enqueued on
that CPU and refcounting that bucket.
When a task is {en,de}queued {on,from} a rq, the set of active clamp
buckets on that CPU can change. If the set of active clamp buckets
changes for a CPU a new "aggregated" clamp value is computed for that
CPU. This is because each clamp bucket enforces a different utilization
clamp value.
Clamp values are always MAX aggregated for both util_min and util_max.
This ensures that no task can affect the performance of other
co-scheduled tasks which are more boosted (i.e. with higher util_min
clamp) or less capped (i.e. with higher util_max clamp).
A task has:
task_struct::uclamp[clamp_id]::bucket_id
to track the "bucket index" of the CPU's clamp bucket it refcounts while
enqueued, for each clamp index (clamp_id).
A runqueue has:
rq::uclamp[clamp_id]::bucket[bucket_id].tasks
to track how many RUNNABLE tasks on that CPU refcount each
clamp bucket (bucket_id) of a clamp index (clamp_id).
It also has a:
rq::uclamp[clamp_id]::bucket[bucket_id].value
to track the clamp value of each clamp bucket (bucket_id) of a clamp
index (clamp_id).
The rq::uclamp::bucket[clamp_id][] array is scanned every time it's
needed to find a new MAX aggregated clamp value for a clamp_id. This
operation is required only when it's dequeued the last task of a clamp
bucket tracking the current MAX aggregated clamp value. In this case,
the CPU is either entering IDLE or going to schedule a less boosted or
more clamped task.
The expected number of different clamp values configured at build time
is small enough to fit the full unordered array into a single cache
line, for configurations of up to 7 buckets.
Add to struct rq the basic data structures required to refcount the
number of RUNNABLE tasks for each clamp bucket. Add also the max
aggregation required to update the rq's clamp value at each
enqueue/dequeue event.
Use a simple linear mapping of clamp values into clamp buckets.
Pre-compute and cache bucket_id to avoid integer divisions at
enqueue/dequeue time.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alessio Balsini <balsini@android.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Joel Fernandes <joelaf@google.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Steve Muckle <smuckle@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Todd Kjos <tkjos@google.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lkml.kernel.org/r/20190621084217.8167-2-patrick.bellasi@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The term 'weighted' is not needed since there is no 'unweighted' load.
Instead use the term 'runnable' to distinguish 'runnable' load
(avg.runnable_load_avg) used in load balance from load (avg.load_avg)
which is the sum of 'runnable' and 'blocked' load.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Morten Rasmussen <morten.rasmussen@arm.com>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/57f27a7f-2775-d832-e965-0f4d51bb1954@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
So that external modules can hook into them and extract the info they
need. Since these new tracepoints have no events associated with them
exporting these tracepoints make them useful for external modules to
perform testing and debugging. There's no other way otherwise to access
them.
BPF doesn't have infrastructure to access these bare tracepoints either.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-7-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The new tracepoint allows us to track the changes in overutilized
status.
Overutilized status is associated with EAS. It indicates that the system
is in high performance state. EAS is disabled when the system is in this
state since there's not much energy savings while high performance tasks
are pushing the system to the limit and it's better to default to the
spreading behavior of the scheduler.
This tracepoint helps understanding and debugging the conditions under
which this happens.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-6-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The new tracepoint allows tracking PELT signals at sched_entity level.
Which is supported in CFS tasks and taskgroups only.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-5-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The new tracepoints allow tracking PELT signals at rq level for all
scheduling classes + irq.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-4-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The new functions allow modules to access internal data structures of
unexported struct cfs_rq and struct rq to extract important information
from the tracepoints to be introduced in later patches.
While at it fix alphabetical order of struct declarations in sched.h
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-3-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Remove the #ifdef CONFIG_SCHED_DEBUG.
Some of the tracepoints to be introduced in later patches need to access
this function. Hence make it always available since the tracepoints are
not protected by CONFIG_SCHED_DEBUG.
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavankumar Kondeti <pkondeti@codeaurora.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Perret <quentin.perret@arm.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de>
Link: https://lkml.kernel.org/r/20190604111459.2862-2-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Statements in the loop's body and before it are identical.
Use do-while to not repeat it.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/43ffea6ee2152b90dedf962eac851609e4197218.1560256112.git.asml.silence@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The 'struct sched_domain *sd' parameter to arch_scale_cpu_capacity() is
unused since commit:
765d0af19f5f ("sched/topology: Remove the ::smt_gain field from 'struct sched_domain'")
Remove it.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: gregkh@linuxfoundation.org
Cc: linux@armlinux.org.uk
Cc: quentin.perret@arm.com
Cc: rafael@kernel.org
Link: https://lkml.kernel.org/r/1560783617-5827-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu fix from Joerg Roedel:
"Revert a commit from the previous pile of fixes which causes new
lockdep splats. It is better to revert it for now and work on a better
and more well tested fix"
* tag 'iommu-fix-v5.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
Revert "iommu/vt-d: Fix lock inversion between iommu->lock and device_domain_lock"
|
|
device_domain_lock"
This reverts commit 7560cc3ca7d9d11555f80c830544e463fcdb28b8.
With 5.2.0-rc5 I can easily trigger this with lockdep and iommu=pt:
======================================================
WARNING: possible circular locking dependency detected
5.2.0-rc5 #78 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
00000000ea2b3beb (&(&iommu->lock)->rlock){+.+.}, at: domain_context_mapping_one+0xa5/0x4e0
but task is already holding lock:
00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (device_domain_lock){....}:
_raw_spin_lock_irqsave+0x3c/0x50
dmar_insert_one_dev_info+0xbb/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
kernel_init_freeable+0x218/0x2c1
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
-> #0 (&(&iommu->lock)->rlock){+.+.}:
lock_acquire+0x9e/0x170
_raw_spin_lock+0x25/0x30
domain_context_mapping_one+0xa5/0x4e0
pci_for_each_dma_alias+0x30/0x140
dmar_insert_one_dev_info+0x3b2/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
kernel_init_freeable+0x218/0x2c1
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(device_domain_lock);
lock(&(&iommu->lock)->rlock);
lock(device_domain_lock);
lock(&(&iommu->lock)->rlock);
*** DEADLOCK ***
2 locks held by swapper/0/1:
#0: 00000000033eb13d (dmar_global_lock){++++}, at: intel_iommu_init+0x1e0/0x1422
#1: 00000000a681907b (device_domain_lock){....}, at: domain_context_mapping_one+0x8d/0x4e0
stack backtrace:
CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.2.0-rc5 #78
Hardware name: LENOVO 20KGS35G01/20KGS35G01, BIOS N23ET50W (1.25 ) 06/25/2018
Call Trace:
dump_stack+0x85/0xc0
print_circular_bug.cold.57+0x15c/0x195
__lock_acquire+0x152a/0x1710
lock_acquire+0x9e/0x170
? domain_context_mapping_one+0xa5/0x4e0
_raw_spin_lock+0x25/0x30
? domain_context_mapping_one+0xa5/0x4e0
domain_context_mapping_one+0xa5/0x4e0
? domain_context_mapping_one+0x4e0/0x4e0
pci_for_each_dma_alias+0x30/0x140
dmar_insert_one_dev_info+0x3b2/0x510
domain_add_dev_info+0x50/0x90
dev_prepare_static_identity_mapping+0x30/0x68
intel_iommu_init+0xddd/0x1422
? printk+0x58/0x6f
? lockdep_hardirqs_on+0xf0/0x180
? do_early_param+0x8e/0x8e
? e820__memblock_setup+0x63/0x63
pci_iommu_init+0x16/0x3f
do_one_initcall+0x5d/0x2b4
? do_early_param+0x8e/0x8e
? rcu_read_lock_sched_held+0x55/0x60
? do_early_param+0x8e/0x8e
kernel_init_freeable+0x218/0x2c1
? rest_init+0x230/0x230
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
domain_context_mapping_one() is taking device_domain_lock first then
iommu lock, while dmar_insert_one_dev_info() is doing the reverse.
That should be introduced by commit:
7560cc3ca7d9 ("iommu/vt-d: Fix lock inversion between iommu->lock and
device_domain_lock", 2019-05-27)
So far I still cannot figure out how the previous deadlock was
triggered (I cannot find iommu lock taken before calling of
iommu_flush_dev_iotlb()), however I'm pretty sure that that change
should be incomplete at least because it does not fix all the places
so we're still taking the locks in different orders, while reverting
that commit is very clean to me so far that we should always take
device_domain_lock first then the iommu lock.
We can continue to try to find the real culprit mentioned in
7560cc3ca7d9, but for now I think we should revert it to fix current
breakage.
CC: Joerg Roedel <joro@8bytes.org>
CC: Lu Baolu <baolu.lu@linux.intel.com>
CC: dave.jiang@intel.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"If an IOMMU is present, ignore the P2PDMA whitelist we added for v5.2
because we don't yet know how to support P2PDMA in that case (Logan
Gunthorpe)"
* tag 'pci-v5.2-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/P2PDMA: Ignore root complex whitelist when an IOMMU is present
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three driver fixes (and one version number update): a suspend hang in
ufs, a qla hard lock on module removal and a qedi panic during
discovery"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Fix hardlockup in abort command during driver remove
scsi: ufs: Avoid runtime suspend possibly being blocked forever
scsi: qedi: update driver version to 8.37.0.20
scsi: qedi: Check targetname while finding boot target information
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"This is a frustratingly large batch at rc5. Some of these were sent
earlier but were missed by me due to being distracted by other things,
and some took a while to track down due to needing manual bisection on
old hardware. But still we clearly need to improve our testing of KVM,
and of 32-bit, so that we catch these earlier.
Summary: seven fixes, all for bugs introduced this cycle.
- The commit to add KASAN support broke booting on 32-bit SMP
machines, due to a refactoring that moved some setup out of the
secondary CPU path.
- A fix for another 32-bit SMP bug introduced by the fast syscall
entry implementation for 32-bit BOOKE. And a build fix for the same
commit.
- Our change to allow the DAWR to be force enabled on Power9
introduced a bug in KVM, where we clobber r3 leading to a host
crash.
- The same commit also exposed a previously unreachable bug in the
nested KVM handling of DAWR, which could lead to an oops in a
nested host.
- One of the DMA reworks broke the b43legacy WiFi driver on some
people's powermacs, fix it by enabling a 30-bit ZONE_DMA on 32-bit.
- A fix for TLB flushing in KVM introduced a new bug, as it neglected
to also flush the ERAT, this could lead to memory corruption in the
guest.
Thanks to: Aaro Koskinen, Christoph Hellwig, Christophe Leroy, Larry
Finger, Michael Neuling, Suraj Jitindar Singh"
* tag 'powerpc-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Invalidate ERAT when flushing guest TLB entries
powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac
KVM: PPC: Book3S HV: Only write DAWR[X] when handling h_set_dawr in real mode
KVM: PPC: Book3S HV: Fix r3 corruption in h_set_dabr()
powerpc/32: fix build failure on book3e with KVM
powerpc/booke: fix fast syscall entry on SMP
powerpc/32s: fix initial setup of segment registers on secondary CPU
|
|
When trying to align the minimum encryption key size requirement for
Bluetooth connections, it turns out doing this in a central location in
the HCI connection handling code is not possible.
Original Bluetooth version up to 2.0 used a security model where the
L2CAP service would enforce authentication and encryption. Starting
with Bluetooth 2.1 and Secure Simple Pairing that model has changed into
that the connection initiator is responsible for providing an encrypted
ACL link before any L2CAP communication can happen.
Now connecting Bluetooth 2.1 or later devices with Bluetooth 2.0 and
before devices are causing a regression. The encryption key size check
needs to be moved out of the HCI connection handling into the L2CAP
channel setup.
To achieve this, the current check inside hci_conn_security() has been
moved into l2cap_check_enc_key_size() helper function and then called
from four decisions point inside L2CAP to cover all combinations of
Secure Simple Pairing enabled devices and device using legacy pairing
and legacy service security model.
Fixes: d5bb334a8e17 ("Bluetooth: Align minimum encryption key size for LE and BR/EDR connections")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203643
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pull networking fixes from David Miller:
1) Fix leak of unqueued fragments in ipv6 nf_defrag, from Guillaume
Nault.
2) Don't access the DDM interface unless the transceiver implements it
in bnx2x, from Mauro S. M. Rodrigues.
3) Don't double fetch 'len' from userspace in sock_getsockopt(), from
JingYi Hou.
4) Sign extension overflow in lio_core, from Colin Ian King.
5) Various netem bug fixes wrt. corrupted packets from Jakub Kicinski.
6) Fix epollout hang in hvsock, from Sunil Muthuswamy.
7) Fix regression in default fib6_type, from David Ahern.
8) Handle memory limits in tcp_fragment more appropriately, from Eric
Dumazet.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
tcp: refine memory limit test in tcp_fragment()
inet: clear num_timeout reqsk_alloc()
net: mvpp2: debugfs: Add pmap to fs dump
ipv6: Default fib6_type to RTN_UNICAST when not set
net: hns3: Fix inconsistent indenting
net/af_iucv: always register net_device notifier
net/af_iucv: build proper skbs for HiperTransport
net/af_iucv: remove GFP_DMA restriction for HiperTransport
net: dsa: mv88e6xxx: fix shift of FID bits in mv88e6185_g1_vtu_loadpurge()
hvsock: fix epollout hang from race condition
net/udp_gso: Allow TX timestamp with UDP GSO
net: netem: fix use after free and double free with packet corruption
net: netem: fix backlog accounting for corrupted GSO frames
net: lio_core: fix potential sign-extension overflow on large shift
tipc: pass tunnel dev as NULL to udp_tunnel(6)_xmit_skb
ip6_tunnel: allow not to count pkts on tstats by passing dev as NULL
ip_tunnel: allow not to count pkts on tstats by setting skb's dev to NULL
tun: wake up waitqueues after IFF_UP is set
net: remove duplicate fetch in sock_getsockopt
tipc: fix issues with early FAILOVER_MSG from peer
...
|
|
tcp_fragment() might be called for skbs in the write queue.
Memory limits might have been exceeded because tcp_sendmsg() only
checks limits at full skb (64KB) boundaries.
Therefore, we need to make sure tcp_fragment() wont punish applications
that might have setup very low SO_SNDBUF values.
Fixes: f070ef2ac667 ("tcp: tcp_fragment() should apply sane memory limits")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Christoph Paasch <cpaasch@apple.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull rdma fixes from Doug Ledford:
"This is probably our last -rc pull request. We don't have anything
else outstanding at the moment anyway, and with the summer months on
us and people taking trips, I expect the next weeks leading up to the
merge window to be pretty calm and sedate.
This has two simple, no brainer fixes for the EFA driver.
Then it has ten not quite so simple fixes for the hfi1 driver. The
problem with them is that they aren't simply one liner typo fixes.
They're still fixes, but they're more complex issues like livelock
under heavy load where the answer was to change work queue usage and
spinlock usage to resolve the problem, or issues with orphaned
requests during certain types of failures like link down which
required some more complex work to fix too. They all look like
legitimate fixes to me, they just aren't small like I wish they were.
Summary:
- 2 minor EFA fixes
- 10 hfi1 fixes related to scaling issues"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/efa: Handle mmap insertions overflow
RDMA/efa: Fix success return value in case of error
IB/hfi1: Handle port down properly in pio
IB/hfi1: Handle wakeup of orphaned QPs for pio
IB/hfi1: Wakeup QPs orphaned on wait list after flush
IB/hfi1: Use aborts to trigger RC throttling
IB/hfi1: Create inline to get extended headers
IB/hfi1: Silence txreq allocation warnings
IB/hfi1: Avoid hardlockup with flushlist_lock
IB/hfi1: Correct tid qp rcd to match verbs context
IB/hfi1: Close PSM sdma_progress sleep window
IB/hfi1: Validate fault injection opcode user input
|
|
Pull more NFS client fixes from Anna Schumaker:
"These are mostly refcounting issues that people have found recently.
The revert fixes a suspend recovery performance issue.
- SUNRPC: Fix a credential refcount leak
- Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
- SUNRPC: Fix xps refcount imbalance on the error path
- NFS4: Only set creation opendata if O_CREAT"
* tag 'nfs-for-5.2-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: Fix a credential refcount leak
Revert "SUNRPC: Declare RPC timers as TIMER_DEFERRABLE"
net :sunrpc :clnt :Fix xps refcount imbalance on the error path
NFS4: Only set creation opendata if O_CREAT
|
|
GCC 5.5.0 sometimes cleverly hoists reads of the pvclock and/or hvclock
pages before the vclock mode checks. This creates a path through
vclock_gettime() in which no vclock is enabled at all (due to disabled
TSC on old CPUs, for example) but the pvclock or hvclock page
nevertheless read. This will segfault on bare metal.
This fixes commit 459e3a21535a ("gcc-9: properly declare the
{pv,hv}clock_page storage") in the sense that, before that commit, GCC
didn't seem to generate the offending code. There was nothing wrong
with that commit per se, and -stable maintainers should backport this to
all supported kernels regardless of whether the offending commit was
present, since the same crash could just as easily be triggered by the
phase of the moon.
On GCC 9.1.1, this doesn't seem to affect the generated code at all, so
I'm not too concerned about performance regressions from this fix.
Cc: stable@vger.kernel.org
Cc: x86@kernel.org
Cc: Borislav Petkov <bp@alien8.de>
Reported-by: Duncan Roe <duncan_roe@optusnet.com.au>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
All callers of __rpc_clone_client() pass in a value for args->cred,
meaning that the credential gets assigned and referenced in
the call to rpc_new_client().
Reported-by: Ido Schimmel <idosch@idosch.org>
Fixes: 79caa5fad47c ("SUNRPC: Cache cred of process creating the rpc_client")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Jon Hunter reports:
"I have been noticing intermittent failures with a system suspend test on
some of our machines that have a NFS mounted root file-system. Bisecting
this issue points to your commit 431235818bc3 ("SUNRPC: Declare RPC
timers as TIMER_DEFERRABLE") and reverting this on top of v5.2-rc3 does
appear to resolve the problem.
The cause of the suspend failure appears to be a long delay observed
sometimes when resuming from suspend, and this is causing our test to
timeout."
This reverts commit 431235818bc3a919ca7487500c67c3144feece80.
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
rpc_clnt_add_xprt take a reference to struct rpc_xprt_switch, but forget
to release it before return, may lead to a memory leak.
Signed-off-by: Lin Yi <teroincn@163.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
We can end up in nfs4_opendata_alloc during task exit, in which case
current->fs has already been cleaned up. This leads to a crash in
current_umask().
Fix this by only setting creation opendata if we are actually doing an open
with O_CREAT. We can drop the check for NULL nfs4_open_createattrs, since
O_CREAT will never be set for the recovery path.
Suggested-by: Trond Myklebust <trondmy@hammerspace.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
Pull ARM fix from Russell King:
"Just one ARM fix this time around for Jason Donenfeld, fixing a
problem with the VDSO generation on big endian"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8867/1: vdso: pass --be8 to linker if necessary
|
|
Pull drm fixes from Dave Airlie:
"Just catching up on the week since back from holidays, everything
seems quite sane.
core:
- copy_to_user fix for really legacy codepaths.
vmwgfx:
- two dma fixes
- one virt hw interaction fix
i915:
- modesetting fix
- gvt fix
panfrost:
- BO unmapping fix
imx:
- image converter fixes"
* tag 'drm-fixes-2019-06-21' of git://anongit.freedesktop.org/drm/drm:
drm/i915: Don't clobber M/N values during fastset check
drm: return -EFAULT if copy_to_user() fails
drm/panfrost: Make sure a BO is only unmapped when appropriate
drm/i915/gvt: ignore unexpected pvinfo write
gpu: ipu-v3: image-convert: Fix image downsize coefficients
gpu: ipu-v3: image-convert: Fix input bytesperline for packed formats
gpu: ipu-v3: image-convert: Fix input bytesperline width/height align
drm/vmwgfx: fix a warning due to missing dma_parms
drm/vmwgfx: Honor the sg list segment size limitation
drm/vmwgfx: Use the backdoor port if the HB port is not available
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO/counter fixes from Greg KH:
"Here are some small driver bugfixes for some staging/iio/counter
drivers.
Staging and IIO have been lumped together for a while, as those
subsystems cross the areas a log, and counter is used by IIO, so
that's why they are all in one pull request here.
These are small fixes for reported issues in some iio drivers, the
erofs filesystem, and a build issue for counter code.
All have been in linux-next with no reported issues"
* tag 'staging-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: erofs: add requirements field in superblock
counter/ftm-quaddec: Add missing dependencies in Kconfig
staging: iio: adt7316: Fix build errors when GPIOLIB is not set
iio: temperature: mlx90632 Relax the compatibility check
iio: imu: st_lsm6dsx: fix PM support for st_lsm6dsx i2c controller
staging:iio:ad7150: fix threshold mode config bit
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 5.2-rc6
Nothing major, just fixes for reported issues:
- soundwire fixes
- thunderbolt fixes
- MAINTAINERS update for fpga maintainer change
- binder bugfix
- habanalabs 64bit pointer fix
- documentation updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
habanalabs: use u64_to_user_ptr() for reading user pointers
doc: fix documentation about UIO_MEM_LOGICAL using
MAINTAINERS / Documentation: Thorsten Scherer is the successor of Gavin Schenk
docs: fb: Add TER16x32 to the available font names
MAINTAINERS: fpga: hand off maintainership to Moritz
thunderbolt: Implement CIO reset correctly for Titan Ridge
binder: fix possible UAF when freeing buffer
thunderbolt: Make sure device runtime resume completes before taking domain lock
soundwire: intel: set dai min and max channels correctly
soundwire: stream: fix bad unlock balance
soundwire: stream: fix out of boundary access on port properties
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are four small USB fixes for 5.2-rc6.
They include two xhci bugfixes, a chipidea fix, and a small dwc2 fix.
Nothing major, just nice things to get resolved for reported issues.
All have been in linux-next with no reported issues"
* tag 'usb-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: detect USB 3.2 capable host controllers correctly
usb: xhci: Don't try to recover an endpoint if port is in error state.
usb: dwc2: Use generic PHY width in params setup
usb: chipidea: udc: workaround for endpoint conflict issue
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
|
|
Pull cifs fixes from Steve French:
"Four small SMB3 fixes, all for stable"
* tag '5.2-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix GlobalMid_Lock bug in cifs_reconnect
SMB3: retry on STATUS_INSUFFICIENT_RESOURCES instead of failing write
cifs: add spinlock for the openFileList to cifsInodeInfo
cifs: fix panic in smb2_reconnect
|
|
git://git.pengutronix.de/git/pza/linux into drm-fixes
drm/imx: ipu-v3 image converter fixes
This series fixes input buffer alignment and downsizer configuration
to adhere to IPU mem2mem CSC/scaler hardware restrictions in certain
downscaling ratios.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1561040798.14349.20.camel@pengutronix.de
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.2-rc6:
- GVT: Fix reserved PVINFO register write (Weinan)
- Avoid clobbering M/N values in fastset fuzzy checks (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87pnn8sbdp.fsf@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
panfrost- Only unmap BO's if they're mapped (Boris)
core- Handle buffer desc copy_to_user failure properly (Dan)
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190619192745.GA145841@art_vandelay
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
A couple of fixes for vmwgfx. Two fixes for a DMA sg-list debug warning
message. These are not cc'd stable since there is no evidence of actual
breakage.
On fix for the high-bandwidth backdoor port which is cc'd stable due to
upcoming hardware, on which the code would otherwise break.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <VMware> <thomas@shipmail.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190618072255.2720-1-thomas@shipmail.org
|
|
The commit fe00e50b2db8 ("ARM: 8858/1: vdso: use $(LD) instead of $(CC)
to link VDSO") removed the passing of CFLAGS, since ld doesn't take
those directly. However, prior, big-endian ARM was relying on gcc to
translate its -mbe8 option into ld's --be8 option. Lacking this, ld
generated be32 code, making the VDSO generate SIGILL when called by
userspace.
This commit passes --be8 if CONFIG_CPU_ENDIAN_BE8 is enabled.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs
Pull overlayfs fixes from Miklos Szeredi:
"Fix two regressions in this cycle, and a couple of older bugs"
* tag 'ovl-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: make i_ino consistent with st_ino in more cases
ovl: fix typo in MODULE_PARM_DESC
ovl: fix bogus -Wmaybe-unitialized warning
ovl: don't fail with disconnected lower NFS
ovl: fix wrong flags check in FS_IOC_FS[SG]ETXATTR ioctls
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"Just a single revert, fixing a regression in -rc1"
* tag 'fuse-fixes-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
Revert "fuse: require /dev/fuse reads to have enough buffer capacity"
|
|
Pull kvm fixes from Paolo Bonzini:
"Fixes for ARM and x86, plus selftest patches and nicer structs for
nested state save/restore"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: reorganize initial steps of vmx_set_nested_state
KVM: arm/arm64: Fix emulated ptimer irq injection
tests: kvm: Check for a kernel warning
kvm: tests: Sort tests in the Makefile alphabetically
KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT
KVM: x86: Modify struct kvm_nested_state to have explicit fields for data
KVM: fix typo in documentation
KVM: nVMX: use correct clean fields when copying from eVMCS
KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroy
KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LIST
KVM: arm64: Implement vq_present() as a macro
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"This is mainly a couple of email address updates to MAINTAINERS, but
we've also fixed a UAPI build issue with musl libc and an accidental
double-initialisation of our pgd_cache due to a naming conflict with a
weak symbol.
There are a couple of outstanding issues that have been reported, but
it doesn't look like they're new and we're still a long way off from
fully debugging them.
Summary:
- Fix use of #include in UAPI headers for compatability with musl libc
- Update email addresses in MAINTAINERS
- Fix initialisation of pgd_cache due to name collision with weak symbol"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/mm: don't initialize pgd_cache twice
MAINTAINERS: Update my email address
arm64/sve: <uapi/asm/ptrace.h> should not depend on <uapi/linux/prctl.h>
arm64: ssbd: explicitly depend on <linux/prctl.h>
MAINTAINERS: Update my email address to use @kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Disable address-of-packed-member warning in s390 specific boot code
to get rid of a gcc9 warning which otherwise is already disabled for
the whole kernel.
- Fix yet another compiler error seen with CONFIG_OPTIMIZE_INLINING
enabled.
- Fix memory leak in vfio-ccw code on module exit.
* tag 's390-5.2-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
vfio-ccw: Destroy kmem cache region on module exit
s390/ctl_reg: mark __ctl_set_bit and __ctl_clear_bit as __always_inline
s390/boot: disable address-of-packed-member warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull two misc vfs fixes from Jan Kara:
"One small quota fix fixing spurious EDQUOT errors and one fanotify fix
fixing a bug in the new fanotify FID reporting code"
* tag 'for_v5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: update connector fsid cache on add mark
quota: fix a problem about transfer quota
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"Here's quite a few MMC fixes intended for v5.2-rc6. This time it also
contains fixes for a WiFi driver, which device is attached to the SDIO
interface. Patches for the WiFi driver have been acked by the
corresponding maintainers.
Summary:
MMC core:
- Make switch to eMMC HS400 more robust for some controllers
- Add two SDIO func API to manage re-tuning constraints
- Prevent processing SDIO IRQs when the card is suspended
MMC host:
- sdhi: Disallow broken HS400 for M3-W ES1.2, RZ/G2M and V3H
- mtk-sd: Fixup support for SDIO IRQs
- sdhci-pci-o2micro: Fixup support for tuning
Wireless BRCMFMAC (SDIO):
- Deal with expected transmission errors related to the idle states
(handled by the Always-On-Subsystem or AOS) on the SDIO-based WiFi
on rk3288-veyron-minnie, rk3288-veyron-speedy and
rk3288-veyron-mickey"
* tag 'mmc-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Prevent processing SDIO IRQs when the card is suspended
mmc: sdhci: sdhci-pci-o2micro: Correctly set bus width when tuning
brcmfmac: sdio: Don't tune while the card is off
mmc: core: Add sdio_retune_hold_now() and sdio_retune_release()
brcmfmac: sdio: Disable auto-tuning around commands expected to fail
mmc: core: API to temporarily disable retuning for SDIO CRC errors
Revert "brcmfmac: disable command decode in sdio_aos"
mmc: mediatek: fix SDIO IRQ detection issue
mmc: mediatek: fix SDIO IRQ interrupt handle flow
mmc: core: complete HS400 before checking status
mmc: sdhi: disallow HS400 for M3-W ES1.2, RZ/G2M, and V3H
|
|
Pull block fixes from Jens Axboe:
"Three fixes that should go into this series.
One is a set of two patches from Christoph, fixing a page leak on same
page merges. Boiled down version of a bigger fix, but this one is more
appropriate for this late in the cycle (and easier to backport to
stable).
The last patch is for a divide error in MD, from Mariusz (via Song)"
* tag 'for-linus-20190620' of git://git.kernel.dk/linux-block:
md: fix for divide error in status_resync
block: fix page leak when merging to same page
block: return from __bio_try_merge_page if merging occured in the same page
|
