summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-05-01fs: simplify the generic_write_sync prototypeChristoph Hellwig12-65/+46
The kiocb already has the new position, so use that. The only interesting case is AIO, where we currently don't bother updating ki_pos. We're about to free the kiocb after we're done, so we might as well update it to make everyone's life simpler. While we're at it also return the bytes written argument passed in if we were successful so that the boilerplate error switch code in the callers can go away. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01fs: add IOCB_SYNC and IOCB_DSYNCChristoph Hellwig13-16/+25
This will allow us to do per-I/O sync file writes, as required by a lot of fileservers or storage targets. XXX: Will need a few additional audits for O_DSYNC Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01direct-io: remove the offset argument to dio_completeChristoph Hellwig1-5/+5
It has to be identical to ki_pos of the iocb, so use that instead. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01direct-io: eliminate the offset argument to ->direct_IOChristoph Hellwig37-112/+99
Including blkdev_direct_IO and dax_do_io. It has to be ki_pos to actually work, so eliminate the superflous argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01xfs: eliminate the pos variable in xfs_file_dio_aio_writeChristoph Hellwig1-9/+8
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01filemap: remove the pos argument to generic_file_direct_writeChristoph Hellwig4-9/+9
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-05-01filemap: remove pos variables in generic_file_read_iterChristoph Hellwig1-8/+7
Just use ki_pos directly to make everyones life easier. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-04-10Linux 4.6-rc3v4.6-rc3Linus Torvalds1-1/+1
2016-04-10Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds5-7/+13
Pull ARM fixes from Russell King: "A couple of small fixes, and wiring up the new syscalls which appeared during the merge window" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8550/1: protect idiv patching against undefined gcc behavior ARM: wire up preadv2 and pwritev2 syscalls ARM: SMP enable of cache maintanence broadcast
2016-04-10Merge tag 'mmc-v4.6-rc1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds5-9/+84
Pull MMC fixes from Ulf Hansson: "Here are a couple of mmc fixes intended for v4.6 rc3: MMC host: - sdhci: Fix regression setting power on Trats2 board - sdhci-pci: Add support and PCI IDs for more Broxton host controllers" * tag 'mmc-v4.6-rc1' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-pci: Add support and PCI IDs for more Broxton host controllers mmc: sdhci: Fix regression setting power on Trats2 board
2016-04-10Merge branch 'i2c/for-current' of ↵Linus Torvalds4-36/+49
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixes from Wolfram Sang: "Some bugfixes from I2C: - fix a uevent triggered boot problem by removing a useless debug print - fix sysfs-attributes of the new i2c-demux-pinctrl driver to follow standard kernel behaviour - fix a potential division-by-zero error (needed two takes)" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: jz4780: really prevent potential division by zero Revert "i2c: jz4780: prevent potential division by zero" i2c: jz4780: prevent potential division by zero i2c: mux: demux-pinctrl: Update docs to new sysfs-attributes i2c: mux: demux-pinctrl: Clean up sysfs attributes i2c: prevent endless uevent loop with CONFIG_I2C_DEBUG_CORE
2016-04-10Revert "ext4: allow readdir()'s of large empty directories to be interrupted"Linus Torvalds2-10/+0
This reverts commit 1028b55bafb7611dda1d8fed2aeca16a436b7dff. It's broken: it makes ext4 return an error at an invalid point, causing the readdir wrappers to write the the position of the last successful directory entry into the position field, which means that the next readdir will now return that last successful entry _again_. You can only return fatal errors (that terminate the readdir directory walk) from within the filesystem readdir functions, the "normal" errors (that happen when the readdir buffer fills up, for example) happen in the iterorator where we know the position of the actual failing entry. I do have a very different patch that does the "signal_pending()" handling inside the iterator function where it is allowable, but while that one passes all the sanity checks, I screwed up something like four times while emailing it out, so I'm not going to commit it today. So my track record is not good enough, and the stars will have to align better before that one gets committed. And it would be good to get some review too, of course, since celestial alignments are always an iffy debugging model. IOW, let's just revert the commit that caused the problem for now. Reported-by: Greg Thelen <gthelen@google.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-09Merge branch 'parisc-4.6-3' of ↵Linus Torvalds7-11/+29
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fixes from Helge Deller: "Since commit 0de798584bde ("parisc: Use generic extable search and sort routines") module loading is boken on parisc, because the parisc module loader wasn't prepared for the new R_PARISC_PCREL32 relocations. In addition, due to that breakage, Mikulas Patocka noticed that handling exceptions from modules probably never worked on parisc. It was just masked by the fact that exceptions from modules don't happen during normal use. This patch series fixes those issues and survives the tests of the lib/test_user_copy kernel module test. Some patches are tagged for stable" * 'parisc-4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Update comment regarding relative extable support parisc: Unbreak handling exceptions from kernel modules parisc: Fix kernel crash with reversed copy_from_user() parisc: Avoid function pointers for kernel exception routines parisc: Handle R_PARISC_PCREL32 relocations in kernel modules
2016-04-09Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds5-32/+53
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "Three fixes, the first two are tagged for -stable: - The ndctl utility/library gained expanded unit tests illuminating a long standing bug in the libnvdimm SMART data retrieval implementation. It has been broken since its initial implementation, now fixed. - Another one line fix for the detection of stale info blocks. Without this change userspace can get into a situation where it is unable to reconfigure a namespace. - Fix the badblock initialization path in the presence of the new (in v4.6-rc1) section alignment workarounds. Without this change badblocks will be reported at the wrong offset. These have received a build success report from the kbuild robot and have appeared in -next with no reported issues" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm, pfn: fix nvdimm_namespace_add_poison() vs section alignment libnvdimm, pfn: fix uuid validation libnvdimm: fix smart data retrieval
2016-04-09Merge tag 'gpio-v4.6-3' of ↵Linus Torvalds3-45/+95
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "Here is a set of four GPIO fixes. The two fixes to the core are serious as they are regressing minor architectures. Core fixes: - Defer GPIO device setup until after gpiolib is initialized. It turns out that a few very tightly integrated GPIO platform drivers initialize so early (befor core_initcall()) so that the gpiolib isn't even initialized itself. That limits what the library can do, and we cannot reference uninitialized fields until later. Defer some of the initialization until right after the gpiolib is initialized in these (rare) cases. - As a consequence: do not use devm_* resources when allocating the states in the initial set-up of the gpiochip. Driver fixes: - In ACPI retrieveal: ignore GpioInt when looking for output GPIOs. - Fix legacy builds on the PXA without a backing pin controller. - Use correct datatype on pca953x register writes" * tag 'gpio-v4.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: Use correct u16 value for register word write gpiolib: Defer gpio device setup until after gpiolib initialization gpiolib: Do not use devm functions when registering gpio chip gpio: pxa: fix legacy non pinctrl aware builds gpio / ACPI: ignore GpioInt() GPIOs when requesting GPIO_OUT_*
2016-04-09Merge tag 'tty-4.6-rc3' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty fixes from Greg KH: "Here are two tty fixes for issues found. One was due to a merge error in 4.6-rc1, and the other a regression fix for UML consoles that broke in 4.6-rc1. Both have been in linux-next for a while" * tag 'tty-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: Fix merge of "tty: Refactor tty_open()" tty: Fix UML console breakage
2016-04-09Merge tag 'usb-4.6-rc3' of ↵Linus Torvalds22-148/+151
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some USB fixes and new device ids for 4.6-rc3. Nothing major, the normal USB gadget fixes and usb-serial driver ids, along with some other fixes mixed in. All except the USB serial ids have been tested in linux-next, the id additions should be fine as they are 'trivial'" * tag 'usb-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits) USB: option: add "D-Link DWM-221 B1" device id USB: serial: cp210x: Adding GE Healthcare Device ID USB: serial: ftdi_sio: Add support for ICP DAS I-756xU devices usb: dwc3: keystone: drop dma_mask configuration usb: gadget: udc-core: remove manual dma configuration usb: dwc3: pci: add ID for one more Intel Broxton platform usb: renesas_usbhs: fix to avoid using a disabled ep in usbhsg_queue_done() usb: dwc2: do not override forced dr_mode in gadget setup usb: gadget: f_midi: unlock on error USB: digi_acceleport: do sanity checking for the number of ports USB: cypress_m8: add endpoint sanity check USB: mct_u232: add sanity checking in probe usb: fix regression in SuperSpeed endpoint descriptor parsing USB: usbip: fix potential out-of-bounds write usb: renesas_usbhs: disable TX IRQ before starting TX DMAC transfer usb: renesas_usbhs: avoid NULL pointer derefernce in usbhsf_pkt_handler() usb: gadget: f_midi: Fixed a bug when buflen was smaller than wMaxPacketSize usb: phy: qcom-8x16: fix regulator API abuse usb: ch9: Fix SSP Device Cap wFunctionalitySupport type usb: gadget: composite: Access SSP Dev Cap fields properly ...
2016-04-09Merge tag 'staging-4.6-rc3' of ↵Linus Torvalds20-15/+1377
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some IIO driver fixes, along with two staging driver fixes for 4.6-rc3. One staging driver patch reverts the deletion of a driver that happened in 4.6-rc1. We thought that laptop.org was dead, but it's still alive and kicking, and has users that were mad we broke their hardware by deleting a driver for their machines. So that driver is added back and everyone is happy again. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: Revert "Staging: olpc_dcon: Remove obsolete driver" staging/rdma/hfi1: select CRC32 iio: gyro: bmg160: fix buffer read values iio: gyro: bmg160: fix endianness when reading axes iio: accel: bmc150: fix endianness when reading axes iio: st_magn: always define ST_MAGN_TRIGGER_SET_STATE iio: fix config watermark initial value iio: health: max30100: correct FIFO check condition iio: imu: Fix inv_mpu6050 dependencies iio: adc: Fix build error of missing devm_ioremap_resource on UM iio: light: apds9960: correct FIFO check condition iio: adc: max1363: correct reference voltage iio: adc: max1363: add missing adc to max1363_id
2016-04-09Merge tag 'scsi-fixes' of ↵Linus Torvalds10-109/+164
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of eight fixes. Two are trivial gcc-6 updates (brace additions and unused variable removal). There's a couple of cxlflash regressions, a correction for sd being overly chatty on revalidation (causing excess log increases). A VPD issue which could crash USB devices because they seem very intolerant to VPD inquiries, an ALUA deadlock fix and a mpt3sas buffer overrun fix" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: Do not attach VPD to devices that don't support it sd: Fix excessive capacity printing on devices with blocks bigger than 512 bytes scsi_dh_alua: Fix a recently introduced deadlock scsi: Declare local symbols static cxlflash: Move to exponential back-off when cmd_room is not available cxlflash: Fix regression issue with re-ordering patch mpt3sas: Don't overreach ioc->reply_post[] during initialization aacraid: add missing curly braces
2016-04-09Merge tag 'md/4.6-rc2-fix' of ↵Linus Torvalds3-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md Pull MD fixes from Shaohua Li: "This update mainly fixes bugs: - fix error handling (Guoqing) - fix a crash when a disk is hotremoved (me) - fix a dead loop (Wei Fang)" * tag 'md/4.6-rc2-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md: md/bitmap: clear bitmap if bitmap_create failed MD: add rdev reference for super write md: fix a trivial typo in comments md:raid1: fix a dead loop when read from a WriteMostly disk
2016-04-09Merge tag 'pm+acpi-4.6-rc3' of ↵Linus Torvalds9-62/+380
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "Fixes for some issues discovered after recent changes and for some that have just been found lately regardless of those changes (intel_pstate, intel_idle, PM core, mailbox/pcc, turbostat) plus support for some new CPU models (intel_idle, Intel RAPL driver, turbostat) and documentation updates (intel_pstate, PM core). Specifics: - intel_pstate fixes for two issues exposed by the recent switch over from using timers and for one issue introduced during the 4.4 cycle plus new comments describing data structures used by the driver (Rafael Wysocki, Srinivas Pandruvada). - intel_idle fixes related to CPU offline/online (Richard Cochran). - intel_idle support (new CPU IDs and state definitions mostly) for Skylake-X and Kabylake processors (Len Brown). - PCC mailbox driver fix for an out-of-bounds memory access that may cause the kernel to panic() (Shanker Donthineni). - New (missing) CPU ID for one apparently overlooked Haswell model in the Intel RAPL power capping driver (Srinivas Pandruvada). - Fix for the PM core's wakeup IRQs framework to make it work after wakeup settings reconfiguration from sysfs (Grygorii Strashko). - Runtime PM documentation update to make it describe what needs to be done during device removal more precisely (Krzysztof Kozlowski). - Stale comment removal cleanup in the cpufreq-dt driver (Viresh Kumar). - turbostat utility fixes and support for Broxton, Skylake-X and Kabylake processors (Len Brown)" * tag 'pm+acpi-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits) PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfs tools/power turbostat: work around RC6 counter wrap tools/power turbostat: initial KBL support tools/power turbostat: initial SKX support tools/power turbostat: decode BXT TSC frequency via CPUID tools/power turbostat: initial BXT support tools/power turbostat: print IRTL MSRs tools/power turbostat: SGX state should print only if --debug intel_idle: Add KBL support intel_idle: Add SKX support intel_idle: Clean up all registered devices on exit. intel_idle: Propagate hot plug errors. intel_idle: Don't overreact to a cpuidle registration failure. intel_idle: Setup the timer broadcast only on successful driver load. intel_idle: Avoid a double free of the per-CPU data. intel_idle: Fix dangling registration on error path. intel_idle: Fix deallocation order on the driver exit path. intel_idle: Remove redundant initialization calls. intel_idle: Fix a helper function's return value. intel_idle: remove useless return from void function. ...
2016-04-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds41-92/+448
Pull networking fixes from David Miller: 1) Stale SKB data pointer access across pskb_may_pull() calls in L2TP, from Haishuang Yan. 2) Fix multicast frame handling in mac80211 AP code, from Felix Fietkau. 3) mac80211 station hashtable insert errors not handled properly, fix from Johannes Berg. 4) Fix TX descriptor count limit handling in e1000, from Alexander Duyck. 5) Revert a buggy netdev refcount fix in netpoll, from Bjorn Helgaas. 6) Must assign rtnl_link_ops of the device before registering it, fix in ip6_tunnel from Thadeu Lima de Souza Cascardo. 7) Memory leak fix in tc action net exit, from WANG Cong. 8) Add missing AF_KCM entries to name tables, from Dexuan Cui. 9) Fix regression in GRE handling of csums wrt. FOU, from Alexander Duyck. 10) Fix memory allocation alignment and congestion map corruption in RDS, from Shamir Rabinovitch. 11) Fix default qdisc regression in tuntap driver, from Jason Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits) bridge, netem: mark mailing lists as moderated tuntap: restore default qdisc mpls: find_outdev: check for err ptr in addition to NULL check ipv6: Count in extension headers in skb->network_header RDS: fix congestion map corruption for PAGE_SIZE > 4k RDS: memory allocated must be align to 8 GRE: Disable segmentation offloads w/ CSUM and we are encapsulated via FOU net: add the AF_KCM entries to family name tables MAINTAINERS: intel-wired-lan list is moderated lib/test_bpf: Add additional BPF_ADD tests lib/test_bpf: Add test to check for result of 32-bit add that overflows lib/test_bpf: Add tests for unsigned BPF_JGT lib/test_bpf: Fix JMP_JSET tests VSOCK: Detach QP check should filter out non matching QPs. stmmac: fix adjust link call in case of a switch is attached af_packet: tone down the Tx-ring unsupported spew. net_sched: fix a memory leak in tc action samples/bpf: Enable powerpc support samples/bpf: Use llc in PATH, rather than a hardcoded value samples/bpf: Fix build breakage with map_perf_test_user.c ...
2016-04-09Merge branch 'for-linus-4.6' of ↵Linus Torvalds9-33/+303
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "These are bug fixes, including a really old fsync bug, and a few trace points to help us track down problems in the quota code" * 'for-linus-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix file/data loss caused by fsync after rename and new inode btrfs: Reset IO error counters before start of device replacing btrfs: Add qgroup tracing Btrfs: don't use src fd for printk btrfs: fallback to vmalloc in btrfs_compare_tree btrfs: handle non-fatal errors in btrfs_qgroup_inherit() btrfs: Output more info for enospc_debug mount option Btrfs: fix invalid reference in replace_path Btrfs: Improve FL_KEEP_SIZE handling in fallocate
2016-04-09Merge tag 'for-linus-4.6-ofs1' of ↵Linus Torvalds6-53/+28
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux Pull orangefs fixes from Mike Marshall: "Orangefs cleanups and a strncpy vulnerability fix. Cleanups: - remove an unused variable from orangefs_readdir. - clean up printk wrapper used for ofs "gossip" debugging. - clean up truncate ctime and mtime setting in inode.c - remove a useless null check found by coccinelle. - optimize some memcpy/memset boilerplate code. - remove some useless sanity checks from xattr.c Fix: - fix a potential strncpy vulnerability" * tag 'for-linus-4.6-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: orangefs: remove unused variable orangefs: Add KERN_<LEVEL> to gossip_<level> macros orangefs: strncpy -> strscpy orangefs: clean up truncate ctime and mtime setting Orangefs: fix ifnullfree.cocci warnings Orangefs: optimize boilerplate code. Orangefs: xattr.c cleanup
2016-04-09Merge tag 'iommu-fixes-v4.6-rc2' of ↵Linus Torvalds5-10/+9
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - compile-time fixes (warnings and failures) - a bug in iommu core code which could cause the group->domain pointer to be falsly cleared - fix in scatterlist handling of the ARM common DMA-API code - stall detection fix for the Rockchip IOMMU driver * tag 'iommu-fixes-v4.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/vt-d: Silence an uninitialized variable warning iommu/rockchip: Fix "is stall active" check iommu: Don't overwrite domain pointer when there is no default_domain iommu/dma: Restore scatterlist offsets correctly iommu: provide of_xlate pointer unconditionally
2016-04-09i2c: jz4780: really prevent potential division by zeroWolfram Sang1-1/+6
Make sure we avoid a division-by-zero OOPS in case clock-frequency is set too low in DT. Add missing '\n' while we are here. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Axel Lin <axel.lin@ingics.com>
2016-04-09Revert "i2c: jz4780: prevent potential division by zero"Wolfram Sang1-1/+1
This reverts commit 34cf2acdafaa31a13821e45de5ee896adcd307b1. 'ret' is not set when bailing out. Also, there is a better place to check for 0. Reported-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-04-08Merge tag 'usb-serial-4.6-rc3' of ↵Greg Kroah-Hartman241-1421/+2174
git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for v4.6-rc3 Here are some new device ids. Signed-off-by: Johan Hovold <johan@kernel.org>
2016-04-08Merge tag 'mac80211-for-davem-2016-04-06' of ↵David S. Miller9-25/+88
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== For the current RC series, we have the following fixes: * TDLS fixes from Arik and Ilan * rhashtable fixes from Ben and myself * documentation fixes from Luis * U-APSD fixes from Emmanuel * a TXQ fix from Felix * and a compiler warning suppression from Jeff ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08bridge, netem: mark mailing lists as moderatedstephen hemminger1-2/+2
I moderate these (lightly loaded) lists to block spam. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08parisc: Update comment regarding relative extable supportHelge Deller1-6/+4
Update the comment to reflect the changes of commit 0de7985 (parisc: Use generic extable search and sort routines). Signed-off-by: Helge Deller <deller@gmx.de>
2016-04-08parisc: Unbreak handling exceptions from kernel modulesHelge Deller4-0/+9
Handling exceptions from modules never worked on parisc. It was just masked by the fact that exceptions from modules don't happen during normal use. When a module triggers an exception in get_user() we need to load the main kernel dp value before accessing the exception_data structure, and afterwards restore the original dp value of the module on exit. Noticed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2016-04-08parisc: Fix kernel crash with reversed copy_from_user()Helge Deller1-0/+3
The kernel module testcase (lib/test_user_copy.c) exhibited a kernel crash on parisc if the parameters for copy_from_user were reversed ("illegal reversed copy_to_user" testcase). Fix this potential crash by checking the fault handler if the faulting address is in the exception table. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org Cc: Kees Cook <keescook@chromium.org>
2016-04-08parisc: Avoid function pointers for kernel exception routinesHelge Deller1-5/+5
We want to avoid the kernel module loader to create function pointers for the kernel fixup routines of get_user() and put_user(). Changing the external reference from function type to int type fixes this. This unbreaks exception handling for get_user() and put_user() when called from a kernel module. Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org
2016-04-08parisc: Handle R_PARISC_PCREL32 relocations in kernel modulesHelge Deller1-0/+8
Commit 0de7985 (parisc: Use generic extable search and sort routines) changed the exception tables to use 32bit relative offsets. This patch now adds support to the kernel module loader to handle such R_PARISC_PCREL32 relocations for 32- and 64-bit modules. Signed-off-by: Helge Deller <deller@gmx.de>
2016-04-08tuntap: restore default qdiscJason Wang1-2/+2
After commit f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev"), default qdisc was changed to noqueue because tuntap does not set tx_queue_len during .setup(). This patch restores default qdisc by setting tx_queue_len in tun_setup(). Fixes: f84bb1eac027 ("net: fix IFF_NO_QUEUE for drivers using alloc_netdev") Cc: Phil Sutter <phil@nwl.cc> Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Phil Sutter <phil@nwl.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08orangefs: remove unused variableMartin Brandenburg1-3/+1
Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08Merge branches 'pm-core', 'powercap' and 'pm-tools'Rafael J. Wysocki5-10/+122
* pm-core: PM / wakeirq: fix wakeirq setting after wakup re-configuration from sysfs PM / runtime: Document steps for device removal * powercap: powercap: intel_rapl: Add missing Haswell model * pm-tools: tools/power turbostat: work around RC6 counter wrap tools/power turbostat: initial KBL support tools/power turbostat: initial SKX support tools/power turbostat: decode BXT TSC frequency via CPUID tools/power turbostat: initial BXT support tools/power turbostat: print IRTL MSRs tools/power turbostat: SGX state should print only if --debug
2016-04-08Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'acpi-cppc'Rafael J. Wysocki4-52/+258
* pm-cpufreq: cpufreq: dt: Drop stale comment cpufreq: intel_pstate: Documenation for structures cpufreq: intel_pstate: fix inconsistency in setting policy limits intel_pstate: Avoid extra invocation of intel_pstate_sample() intel_pstate: Do not set utilization update hook too early * pm-cpuidle: intel_idle: Add KBL support intel_idle: Add SKX support intel_idle: Clean up all registered devices on exit. intel_idle: Propagate hot plug errors. intel_idle: Don't overreact to a cpuidle registration failure. intel_idle: Setup the timer broadcast only on successful driver load. intel_idle: Avoid a double free of the per-CPU data. intel_idle: Fix dangling registration on error path. intel_idle: Fix deallocation order on the driver exit path. intel_idle: Remove redundant initialization calls. intel_idle: Fix a helper function's return value. intel_idle: remove useless return from void function. * acpi-cppc: mailbox: pcc: Don't access an unmapped memory address space
2016-04-08orangefs: Add KERN_<LEVEL> to gossip_<level> macrosJoe Perches1-14/+17
Emit the logging messages at the appropriate levels. Miscellanea: o Change format to fmt o Use the more common ##__VA_ARGS__ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08orangefs: strncpy -> strscpyMartin Brandenburg1-1/+5
It would have been possible for a rogue client-core to send in a symlink target which is not NUL terminated. This returns EIO if the client-core gives us corrupt data. Leave debugfs and superblock code as is for now. Other dcache.c and namei.c strncpy instances are safe because ORANGEFS_NAME_MAX = NAME_MAX + 1; there is always enough space for a name plus a NUL byte. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08orangefs: clean up truncate ctime and mtime settingMartin Brandenburg1-15/+1
The ctime and mtime are always updated on a successful ftruncate and only updated on a successful truncate where the size changed. We handle the ``if the size changed'' bit. This matches FUSE's behavior. Signed-off-by: Martin Brandenburg <martin@omnibond.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08Orangefs: fix ifnullfree.cocci warningskbuild test robot1-2/+1
fs/orangefs/orangefs-debugfs.c:130:2-26: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08Orangefs: optimize boilerplate code.Mike Marshall2-2/+2
Suggested by David Binderman <dcb314@hotmail.com> The former can potentially be a performance win over the latter. memcpy(d, s, len); memset(d+len, c, size-len); memset(d, c, size); memcpy(d, s, len); Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08Orangefs: xattr.c cleanupMike Marshall1-16/+1
1. It is nonsense to test for negative size_t, suggested by David Binderman <dcb314@hotmail.com> 2. By the time Orangefs gets called, the vfs has ensured that name != NULL, and that buffer and size are sane. Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-04-08mpls: find_outdev: check for err ptr in addition to NULL checkRoopa Prabhu1-0/+3
find_outdev calls inet{,6}_fib_lookup_dev() or dev_get_by_index() to find the output device. In case of an error, inet{,6}_fib_lookup_dev() returns error pointer and dev_get_by_index() returns NULL. But the function only checks for NULL and thus can end up calling dev_put on an ERR_PTR. This patch adds an additional check for err ptr after the NULL check. Before: Trying to add an mpls route with no oif from user, no available path to 10.1.1.8 and no default route: $ip -f mpls route add 100 as 200 via inet 10.1.1.8 [ 822.337195] BUG: unable to handle kernel NULL pointer dereference at 00000000000003a3 [ 822.340033] IP: [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] PGD 1db38067 PUD 1de9e067 PMD 0 [ 822.340033] Oops: 0000 [#1] SMP [ 822.340033] Modules linked in: [ 822.340033] CPU: 0 PID: 11148 Comm: ip Not tainted 4.5.0-rc7+ #54 [ 822.340033] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 822.340033] task: ffff88001db82580 ti: ffff88001dad4000 task.ti: ffff88001dad4000 [ 822.340033] RIP: 0010:[<ffffffff8148781e>] [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] RSP: 0018:ffff88001dad7a88 EFLAGS: 00010282 [ 822.340033] RAX: ffffffffffffff9b RBX: ffffffffffffff9b RCX: 0000000000000002 [ 822.340033] RDX: 00000000ffffff9b RSI: 0000000000000008 RDI: 0000000000000000 [ 822.340033] RBP: ffff88001ddc9ea0 R08: ffff88001e9f1768 R09: 0000000000000000 [ 822.340033] R10: ffff88001d9c1100 R11: ffff88001e3c89f0 R12: ffffffff8187e0c0 [ 822.340033] R13: ffffffff8187e0c0 R14: ffff88001ddc9e80 R15: 0000000000000004 [ 822.340033] FS: 00007ff9ed798700(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 [ 822.340033] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 822.340033] CR2: 00000000000003a3 CR3: 000000001de89000 CR4: 00000000000006f0 [ 822.340033] Stack: [ 822.340033] 0000000000000000 0000000100000000 0000000000000000 0000000000000000 [ 822.340033] 0000000000000000 0801010a00000000 0000000000000000 0000000000000000 [ 822.340033] 0000000000000004 ffffffff8148749b ffffffff8187e0c0 000000000000001c [ 822.340033] Call Trace: [ 822.340033] [<ffffffff8148749b>] ? mpls_rt_alloc+0x2b/0x3e [ 822.340033] [<ffffffff81488e66>] ? mpls_rtm_newroute+0x358/0x3e2 [ 822.340033] [<ffffffff810e7bbc>] ? get_page+0x5/0xa [ 822.340033] [<ffffffff813b7d94>] ? rtnetlink_rcv_msg+0x17e/0x191 [ 822.340033] [<ffffffff8111794e>] ? __kmalloc_track_caller+0x8c/0x9e [ 822.340033] [<ffffffff813c9393>] ? rht_key_hashfn.isra.20.constprop.57+0x14/0x1f [ 822.340033] [<ffffffff813b7c16>] ? __rtnl_unlock+0xc/0xc [ 822.340033] [<ffffffff813cb794>] ? netlink_rcv_skb+0x36/0x82 [ 822.340033] [<ffffffff813b4507>] ? rtnetlink_rcv+0x1f/0x28 [ 822.340033] [<ffffffff813cb2b1>] ? netlink_unicast+0x106/0x189 [ 822.340033] [<ffffffff813cb5b3>] ? netlink_sendmsg+0x27f/0x2c8 [ 822.340033] [<ffffffff81392ede>] ? sock_sendmsg_nosec+0x10/0x1b [ 822.340033] [<ffffffff81393df1>] ? ___sys_sendmsg+0x182/0x1e3 [ 822.340033] [<ffffffff810e4f35>] ? __alloc_pages_nodemask+0x11c/0x1e4 [ 822.340033] [<ffffffff8110619c>] ? PageAnon+0x5/0xd [ 822.340033] [<ffffffff811062fe>] ? __page_set_anon_rmap+0x45/0x52 [ 822.340033] [<ffffffff810e7bbc>] ? get_page+0x5/0xa [ 822.340033] [<ffffffff810e85ab>] ? __lru_cache_add+0x1a/0x3a [ 822.340033] [<ffffffff81087ea9>] ? current_kernel_time64+0x9/0x30 [ 822.340033] [<ffffffff813940c4>] ? __sys_sendmsg+0x3c/0x5a [ 822.340033] [<ffffffff8148f597>] ? entry_SYSCALL_64_fastpath+0x12/0x6a [ 822.340033] Code: 83 08 04 00 00 65 ff 00 48 8b 3c 24 e8 40 7c f2 ff eb 13 48 c7 c3 9f ff ff ff eb 0f 89 ce e8 f1 ae f1 ff 48 89 c3 48 85 db 74 15 <48> 8b 83 08 04 00 00 65 ff 08 48 81 fb 00 f0 ff ff 76 0d eb 07 [ 822.340033] RIP [<ffffffff8148781e>] mpls_nh_assign_dev+0x10b/0x182 [ 822.340033] RSP <ffff88001dad7a88> [ 822.340033] CR2: 00000000000003a3 [ 822.435363] ---[ end trace 98cc65e6f6b8bf11 ]--- After patch: $ip -f mpls route add 100 as 200 via inet 10.1.1.8 RTNETLINK answers: Network is unreachable Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Reported-by: David Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-08gpio: pca953x: Use correct u16 value for register word writeYong Li1-1/+2
The current implementation only uses the first byte in val, the second byte is always 0. Change it to use cpu_to_le16 to write the two bytes into the register Cc: stable@vger.kernel.org Signed-off-by: Yong Li <sdliyong@gmail.com> Reviewed-by: Phil Reid <preid@electromag.com.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-08gpiolib: Defer gpio device setup until after gpiolib initializationGuenter Roeck1-31/+67
Since commit ff2b13592299 ("gpio: make the gpiochip a real device"), attempts to add a gpio chip prior to gpiolib initialization cause the system to crash. This happens because gpio_bus_type has not been registered yet. Defer creating gpio devices until after gpiolib has been initialized to fix the problem. Cc: Greg Ungerer <gerg@uclinux.org> Cc: Alexandre Courbot <gnurou@gmail.com> Fixes: ff2b13592299 ("gpio: make the gpiochip a real device") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-08gpiolib: Do not use devm functions when registering gpio chipGuenter Roeck1-7/+12
It is possible that a gpio chip is registered before the gpiolib initialization code has run. This means we can not use devm_ functions to allocate memory at that time. Do it the old fashioned way. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-08gpio: pxa: fix legacy non pinctrl aware buildsRobert Jarzmik1-2/+2
In legacy pxa builds, ie. non device-tree and platform-data only builds, pinctrl is not yet available. As a consequence, the pinctrl gpio direction change function is a stub, returning always success. In the current state, the gpio driver direction function believes the pinctrl direction change was successful, and exits without actually changing the gpio direction. This patch changes the logic : - if the pinctrl direction function fails, gpio direction will report that failure - if the pinctrl direction function succeeds, gpio direction is changed by the gpio driver anyway. This is sub optimal in the pinctrl aware case, as the gpio direction will be changed twice: once by pinctrl function and another time by the gpio direction function. Yet it should be acceptable in this form, as this is functional for all pxa platforms (device-tree and platform-data), and moreover changing a gpio direction is very very seldom, usually in machine initialization, seldom in drivers probe, and an exception for ac97 reset bug. Fixes: a770d946371e ("gpio: pxa: add pin control gpio direction and request") Reported-by: Guenter Roeck <guenter@roeck-us.net> Tested-by: Guenter Roeck <guenter@roeck-us.net> Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-19 11:53:17 +0000