summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-07-18Revert "ocfs2: mount shared volume without ha stack"Junxiao Bi3-51/+20
This reverts commit 912f655d78c5d4ad05eac287f23a435924df7144. This commit introduced a regression that can cause mount hung. The changes in __ocfs2_find_empty_slot causes that any node with none-zero node number can grab the slot that was already taken by node 0, so node 1 will access the same journal with node 0, when it try to grab journal cluster lock, it will hung because it was already acquired by node 0. It's very easy to reproduce this, in one cluster, mount node 0 first, then node 1, you will see the following call trace from node 1. [13148.735424] INFO: task mount.ocfs2:53045 blocked for more than 122 seconds. [13148.739691] Not tainted 5.15.0-2148.0.4.el8uek.mountracev2.x86_64 #2 [13148.742560] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [13148.745846] task:mount.ocfs2 state:D stack: 0 pid:53045 ppid: 53044 flags:0x00004000 [13148.749354] Call Trace: [13148.750718] <TASK> [13148.752019] ? usleep_range+0x90/0x89 [13148.753882] __schedule+0x210/0x567 [13148.755684] schedule+0x44/0xa8 [13148.757270] schedule_timeout+0x106/0x13c [13148.759273] ? __prepare_to_swait+0x53/0x78 [13148.761218] __wait_for_common+0xae/0x163 [13148.763144] __ocfs2_cluster_lock.constprop.0+0x1d6/0x870 [ocfs2] [13148.765780] ? ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2] [13148.768312] ocfs2_inode_lock_full_nested+0x18d/0x398 [ocfs2] [13148.770968] ocfs2_journal_init+0x91/0x340 [ocfs2] [13148.773202] ocfs2_check_volume+0x39/0x461 [ocfs2] [13148.775401] ? iput+0x69/0xba [13148.777047] ocfs2_mount_volume.isra.0.cold+0x40/0x1f5 [ocfs2] [13148.779646] ocfs2_fill_super+0x54b/0x853 [ocfs2] [13148.781756] mount_bdev+0x190/0x1b7 [13148.783443] ? ocfs2_remount+0x440/0x440 [ocfs2] [13148.785634] legacy_get_tree+0x27/0x48 [13148.787466] vfs_get_tree+0x25/0xd0 [13148.789270] do_new_mount+0x18c/0x2d9 [13148.791046] __x64_sys_mount+0x10e/0x142 [13148.792911] do_syscall_64+0x3b/0x89 [13148.794667] entry_SYSCALL_64_after_hwframe+0x170/0x0 [13148.797051] RIP: 0033:0x7f2309f6e26e [13148.798784] RSP: 002b:00007ffdcee7d408 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5 [13148.801974] RAX: ffffffffffffffda RBX: 00007ffdcee7d4a0 RCX: 00007f2309f6e26e [13148.804815] RDX: 0000559aa762a8ae RSI: 0000559aa939d340 RDI: 0000559aa93a22b0 [13148.807719] RBP: 00007ffdcee7d5b0 R08: 0000559aa93a2290 R09: 00007f230a0b4820 [13148.810659] R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcee7d420 [13148.813609] R13: 0000000000000000 R14: 0000559aa939f000 R15: 0000000000000000 [13148.816564] </TASK> To fix it, we can just fix __ocfs2_find_empty_slot. But original commit introduced the feature to mount ocfs2 locally even it is cluster based, that is a very dangerous, it can easily cause serious data corruption, there is no way to stop other nodes mounting the fs and corrupting it. Setup ha or other cluster-aware stack is just the cost that we have to take for avoiding corruption, otherwise we have to do it in kernel. Link: https://lkml.kernel.org/r/20220603222801.42488-1-junxiao.bi@oracle.com Fixes: 912f655d78c5("ocfs2: mount shared volume without ha stack") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <heming.zhao@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-18hugetlb: fix memoryleak in hugetlb_mcopy_atomic_pteMiaohe Lin1-0/+1
When alloc_huge_page fails, *pagep is set to NULL without put_page first. So the hugepage indicated by *pagep is leaked. Link: https://lkml.kernel.org/r/20220709092629.54291-1-linmiaohe@huawei.com Fixes: 8cc5fcbb5be8 ("mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Acked-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-18fs: sendfile handles O_NONBLOCK of out_fdAndrei Vagin1-0/+3
sendfile has to return EAGAIN if out_fd is nonblocking and the write into it would block. Here is a small reproducer for the problem: #define _GNU_SOURCE /* See feature_test_macros(7) */ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <errno.h> #include <sys/stat.h> #include <sys/types.h> #include <sys/sendfile.h> #define FILE_SIZE (1UL << 30) int main(int argc, char **argv) { int p[2], fd; if (pipe2(p, O_NONBLOCK)) return 1; fd = open(argv[1], O_RDWR | O_TMPFILE, 0666); if (fd < 0) return 1; ftruncate(fd, FILE_SIZE); if (sendfile(p[1], fd, 0, FILE_SIZE) == -1) { fprintf(stderr, "FAIL\n"); } if (sendfile(p[1], fd, 0, FILE_SIZE) != -1 || errno != EAGAIN) { fprintf(stderr, "FAIL\n"); } return 0; } It worked before b964bf53e540, it is stuck after b964bf53e540, and it works again with this fix. This regression occurred because do_splice_direct() calls pipe_write that handles O_NONBLOCK. Here is a trace log from the reproducer: 1) | __x64_sys_sendfile64() { 1) | do_sendfile() { 1) | __fdget() 1) | rw_verify_area() 1) | __fdget() 1) | rw_verify_area() 1) | do_splice_direct() { 1) | rw_verify_area() 1) | splice_direct_to_actor() { 1) | do_splice_to() { 1) | rw_verify_area() 1) | generic_file_splice_read() 1) + 74.153 us | } 1) | direct_splice_actor() { 1) | iter_file_splice_write() { 1) | __kmalloc() 1) 0.148 us | pipe_lock(); 1) 0.153 us | splice_from_pipe_next.part.0(); 1) 0.162 us | page_cache_pipe_buf_confirm(); ... 16 times 1) 0.159 us | page_cache_pipe_buf_confirm(); 1) | vfs_iter_write() { 1) | do_iter_write() { 1) | rw_verify_area() 1) | do_iter_readv_writev() { 1) | pipe_write() { 1) | mutex_lock() 1) 0.153 us | mutex_unlock(); 1) 1.368 us | } 1) 1.686 us | } 1) 5.798 us | } 1) 6.084 us | } 1) 0.174 us | kfree(); 1) 0.152 us | pipe_unlock(); 1) + 14.461 us | } 1) + 14.783 us | } 1) 0.164 us | page_cache_pipe_buf_release(); ... 16 times 1) 0.161 us | page_cache_pipe_buf_release(); 1) | touch_atime() 1) + 95.854 us | } 1) + 99.784 us | } 1) ! 107.393 us | } 1) ! 107.699 us | } Link: https://lkml.kernel.org/r/20220415005015.525191-1-avagin@gmail.com Fixes: b964bf53e540 ("teach sendfile(2) to handle send-to-pipe directly") Signed-off-by: Andrei Vagin <avagin@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-18ntfs: fix use-after-free in ntfs_ucsncmp()ChenXiaoSong1-2/+6
Syzkaller reported use-after-free bug as follows: ================================================================== BUG: KASAN: use-after-free in ntfs_ucsncmp+0x123/0x130 Read of size 2 at addr ffff8880751acee8 by task a.out/879 CPU: 7 PID: 879 Comm: a.out Not tainted 5.19.0-rc4-next-20220630-00001-gcc5218c8bd2c-dirty #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x1c0/0x2b0 print_address_description.constprop.0.cold+0xd4/0x484 print_report.cold+0x55/0x232 kasan_report+0xbf/0xf0 ntfs_ucsncmp+0x123/0x130 ntfs_are_names_equal.cold+0x2b/0x41 ntfs_attr_find+0x43b/0xb90 ntfs_attr_lookup+0x16d/0x1e0 ntfs_read_locked_attr_inode+0x4aa/0x2360 ntfs_attr_iget+0x1af/0x220 ntfs_read_locked_inode+0x246c/0x5120 ntfs_iget+0x132/0x180 load_system_files+0x1cc6/0x3480 ntfs_fill_super+0xa66/0x1cf0 mount_bdev+0x38d/0x460 legacy_get_tree+0x10d/0x220 vfs_get_tree+0x93/0x300 do_new_mount+0x2da/0x6d0 path_mount+0x496/0x19d0 __x64_sys_mount+0x284/0x300 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f3f2118d9ea Code: 48 8b 0d a9 f4 0b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 76 f4 0b 00 f7 d8 64 89 01 48 RSP: 002b:00007ffc269deac8 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3f2118d9ea RDX: 0000000020000000 RSI: 0000000020000100 RDI: 00007ffc269dec00 RBP: 00007ffc269dec80 R08: 00007ffc269deb00 R09: 00007ffc269dec44 R10: 0000000000000000 R11: 0000000000000202 R12: 000055f81ab1d220 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> The buggy address belongs to the physical page: page:0000000085430378 refcount:1 mapcount:1 mapping:0000000000000000 index:0x555c6a81d pfn:0x751ac memcg:ffff888101f7e180 anon flags: 0xfffffc00a0014(uptodate|lru|mappedtodisk|swapbacked|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc00a0014 ffffea0001bf2988 ffffea0001de2448 ffff88801712e201 raw: 0000000555c6a81d 0000000000000000 0000000100000000 ffff888101f7e180 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880751acd80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880751ace00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8880751ace80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff8880751acf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8880751acf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== The reason is that struct ATTR_RECORD->name_offset is 6485, end address of name string is out of bounds. Fix this by adding sanity check on end address of attribute name string. [akpm@linux-foundation.org: coding-style cleanups] [chenxiaosong2@huawei.com: cleanup suggested by Hawkins Jiawei] Link: https://lkml.kernel.org/r/20220709064511.3304299-1-chenxiaosong2@huawei.com Link: https://lkml.kernel.org/r/20220707105329.4020708-1-chenxiaosong2@huawei.com Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com> Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Cc: Anton Altaparmakov <anton@tuxera.com> Cc: ChenXiaoSong <chenxiaosong2@huawei.com> Cc: Yongqiang Liu <liuyongqiang13@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Cc: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-18secretmem: fix unhandled fault in truncateMike Rapoport1-7/+26
syzkaller reports the following issue: BUG: unable to handle page fault for address: ffff888021f7e005 PGD 11401067 P4D 11401067 PUD 11402067 PMD 21f7d063 PTE 800fffffde081060 Oops: 0002 [#1] PREEMPT SMP KASAN CPU: 0 PID: 3761 Comm: syz-executor281 Not tainted 5.19.0-rc4-syzkaller-00014-g941e3e791269 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:memset_erms+0x9/0x10 arch/x86/lib/memset_64.S:64 Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01 RSP: 0018:ffffc9000329fa90 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000001000 RCX: 0000000000000ffb RDX: 0000000000000ffb RSI: 0000000000000000 RDI: ffff888021f7e005 RBP: ffffea000087df80 R08: 0000000000000001 R09: ffff888021f7e005 R10: ffffed10043efdff R11: 0000000000000000 R12: 0000000000000005 R13: 0000000000000000 R14: 0000000000001000 R15: 0000000000000ffb FS: 00007fb29d8b2700(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888021f7e005 CR3: 0000000026e7b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> zero_user_segments include/linux/highmem.h:272 [inline] folio_zero_range include/linux/highmem.h:428 [inline] truncate_inode_partial_folio+0x76a/0xdf0 mm/truncate.c:237 truncate_inode_pages_range+0x83b/0x1530 mm/truncate.c:381 truncate_inode_pages mm/truncate.c:452 [inline] truncate_pagecache+0x63/0x90 mm/truncate.c:753 simple_setattr+0xed/0x110 fs/libfs.c:535 secretmem_setattr+0xae/0xf0 mm/secretmem.c:170 notify_change+0xb8c/0x12b0 fs/attr.c:424 do_truncate+0x13c/0x200 fs/open.c:65 do_sys_ftruncate+0x536/0x730 fs/open.c:193 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7fb29d900899 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 11 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fb29d8b2318 EFLAGS: 00000246 ORIG_RAX: 000000000000004d RAX: ffffffffffffffda RBX: 00007fb29d988408 RCX: 00007fb29d900899 RDX: 00007fb29d900899 RSI: 0000000000000005 RDI: 0000000000000003 RBP: 00007fb29d988400 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb29d98840c R13: 00007ffca01a23bf R14: 00007fb29d8b2400 R15: 0000000000022000 </TASK> Modules linked in: CR2: ffff888021f7e005 ---[ end trace 0000000000000000 ]--- Eric Biggers suggested that this happens when secretmem_setattr()->simple_setattr() races with secretmem_fault() so that a page that is faulted in by secretmem_fault() (and thus removed from the direct map) is zeroed by inode truncation right afterwards. Use mapping->invalidate_lock to make secretmem_fault() and secretmem_setattr() mutually exclusive. [rppt@linux.ibm.com: v3] Link: https://lkml.kernel.org/r/20220714091337.412297-1-rppt@kernel.org Link: https://lkml.kernel.org/r/20220707165650.248088-1-rppt@kernel.org Reported-by: syzbot+9bd2b7adbd34b30b87e4@syzkaller.appspotmail.com Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Suggested-by: Eric Biggers <ebiggers@kernel.org> Reviewed-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-18mm/hugetlb: separate path for hwpoison entry in copy_hugetlb_page_range()Naoya Horiguchi1-2/+7
Originally copy_hugetlb_page_range() handles migration entries and hwpoisoned entries in similar manner. But recently the related code path has more code for migration entries, and when is_writable_migration_entry() was converted to !is_readable_migration_entry(), hwpoison entries on source processes got to be unexpectedly updated (which is legitimate for migration entries, but not for hwpoison entries). This results in unexpected serious issues like kernel panic when forking processes with hwpoison entries in pmd. Separate the if branch into one for hwpoison entries and one for migration entries. Link: https://lkml.kernel.org/r/20220704013312.2415700-3-naoya.horiguchi@linux.dev Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reviewed-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> [5.18] Cc: David Hildenbrand <david@redhat.com> Cc: Liu Shixin <liushixin2@huawei.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-18mm: fix missing wake-up event for FSDAX pagesMuchun Song3-10/+16
FSDAX page refcounts are 1-based, rather than 0-based: if refcount is 1, then the page is freed. The FSDAX pages can be pinned through GUP, then they will be unpinned via unpin_user_page() using a folio variant to put the page, however, folio variants did not consider this special case, the result will be to miss a wakeup event (like the user of __fuse_dax_break_layouts()). This results in a task being permanently stuck in TASK_INTERRUPTIBLE state. Since FSDAX pages are only possibly obtained by GUP users, so fix GUP instead of folio_put() to lower overhead. Link: https://lkml.kernel.org/r/20220705123532.283-1-songmuchun@bytedance.com Fixes: d8ddc099c6b3 ("mm/gup: Add gup_put_folio()") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Suggested-by: Matthew Wilcox <willy@infradead.org> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-18mm: fix page leak with multiple threads mapping the same pageJosef Bacik1-2/+5
We have an application with a lot of threads that use a shared mmap backed by tmpfs mounted with -o huge=within_size. This application started leaking loads of huge pages when we upgraded to a recent kernel. Using the page ref tracepoints and a BPF program written by Tejun Heo we were able to determine that these pages would have multiple refcounts from the page fault path, but when it came to unmap time we wouldn't drop the number of refs we had added from the faults. I wrote a reproducer that mmap'ed a file backed by tmpfs with -o huge=always, and then spawned 20 threads all looping faulting random offsets in this map, while using madvise(MADV_DONTNEED) randomly for huge page aligned ranges. This very quickly reproduced the problem. The problem here is that we check for the case that we have multiple threads faulting in a range that was previously unmapped. One thread maps the PMD, the other thread loses the race and then returns 0. However at this point we already have the page, and we are no longer putting this page into the processes address space, and so we leak the page. We actually did the correct thing prior to f9ce0be71d1f, however it looks like Kirill copied what we do in the anonymous page case. In the anonymous page case we don't yet have a page, so we don't have to drop a reference on anything. Previously we did the correct thing for file based faults by returning VM_FAULT_NOPAGE so we correctly drop the reference on the page we faulted in. Fix this by returning VM_FAULT_NOPAGE in the pmd_devmap_trans_unstable() case, this makes us drop the ref on the page properly, and now my reproducer no longer leaks the huge pages. [josef@toxicpanda.com: v2] Link: https://lkml.kernel.org/r/e90c8f0dbae836632b669c2afc434006a00d4a67.1657721478.git.josef@toxicpanda.com Link: https://lkml.kernel.org/r/2b798acfd95c9ab9395fe85e8d5a835e2e10a920.1657051137.git.josef@toxicpanda.com Fixes: f9ce0be71d1f ("mm: Cleanup faultaround and finish_fault() codepaths") Signed-off-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Rik van Riel <riel@surriel.com> Signed-off-by: Chris Mason <clm@fb.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-18mailmap: update Seth Forshee's email addressSeth Forshee1-0/+1
seth.forshee@canonical.com is no longer valid, use sforshee@kernel.org instead. Link: https://lkml.kernel.org/r/20220628200734.424495-1-sforshee@kernel.org Signed-off-by: Seth Forshee <sforshee@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-18tmpfs: fix the issue that the mount and remount results are inconsistent.ZhaoLong Wang1-5/+2
An undefined-behavior issue has not been completely fixed since commit d14f5efadd84 ("tmpfs: fix undefined-behaviour in shmem_reconfigure()"). In the commit, check in the shmem_reconfigure() is added in remount process to avoid the Ubsan problem. However, the check is not added to the mount process. It causes inconsistent results between mount and remount. The operations to reproduce the problem in user mode as follows: If nr_blocks is set to 0x8000000000000000, the mounting is successful. # mount tmpfs /dev/shm/ -t tmpfs -o nr_blocks=0x8000000000000000 However, when -o remount is used, the mount fails because of the check in the shmem_reconfigure() # mount tmpfs /dev/shm/ -t tmpfs -o remount,nr_blocks=0x8000000000000000 mount: /dev/shm: mount point not mounted or bad option. Therefore, add checks in the shmem_parse_one() function and remove the check in shmem_reconfigure() to avoid this problem. Link: https://lkml.kernel.org/r/20220629124324.1640807-1-wangzhaolong1@huawei.com Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Cc: Luo Meng <luomeng12@huawei.com> Cc: Hugh Dickins <hughd@google.com> Cc: Yu Kuai <yukuai3@huawei.com> Cc: Zhihao Cheng <chengzhihao1@huawei.com> Cc: Zhang Yi <yi.zhang@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-18mm: kfence: apply kmemleak_ignore_phys on early allocated poolYee Lee1-9/+9
This patch solves two issues. (1) The pool allocated by memblock needs to unregister from kmemleak scanning. Apply kmemleak_ignore_phys to replace the original kmemleak_free as its address now is stored in the phys tree. (2) The pool late allocated by page-alloc doesn't need to unregister. Move out the freeing operation from its call path. Link: https://lkml.kernel.org/r/20220628113714.7792-2-yee.lee@mediatek.com Fixes: 0c24e061196c21d5 ("mm: kmemleak: add rbtree and store physical address for objects allocated with PA") Signed-off-by: Yee Lee <yee.lee@mediatek.com> Suggested-by: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Suggested-by: Marco Elver <elver@google.com> Reviewed-by: Marco Elver <elver@google.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03mm: split huge PUD on wp_huge_pud fallbackGowans, James1-13/+14
Currently the implementation will split the PUD when a fallback is taken inside the create_huge_pud function. This isn't where it should be done: the splitting should be done in wp_huge_pud, just like it's done for PMDs. Reason being that if a callback is taken during create, there is no PUD yet so nothing to split, whereas if a fallback is taken when encountering a write protection fault there is something to split. It looks like this was the original intention with the commit where the splitting was introduced, but somehow it got moved to the wrong place between v1 and v2 of the patch series. Rebase mistake perhaps. Link: https://lkml.kernel.org/r/6f48d622eb8bce1ae5dd75327b0b73894a2ec407.camel@amazon.com Fixes: 327e9fd48972 ("mm: Split huge pages on write-notify or COW") Signed-off-by: James Gowans <jgowans@amazon.com> Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Cc: Jan H. Schönherr <jschoenh@amazon.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03nilfs2: fix incorrect masking of permission flags for symlinksRyusuke Konishi1-0/+3
The permission flags of newly created symlinks are wrongly dropped on nilfs2 with the current umask value even though symlinks should have 777 (rwxrwxrwx) permissions: $ umask 0022 $ touch file && ln -s file symlink; ls -l file symlink -rw-r--r--. 1 root root 0 Jun 23 16:29 file lrwxr-xr-x. 1 root root 4 Jun 23 16:29 symlink -> file This fixes the bug by inserting a missing check that excludes symlinks. Link: https://lkml.kernel.org/r/1655974441-5612-1-git-send-email-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: Tommy Pettersson <ptp@lysator.liu.se> Reported-by: Ciprian Craciun <ciprian.craciun@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03mm/rmap: fix dereferencing invalid subpage pointer in try_to_migrate_one()David Hildenbrand1-10/+17
The subpage we calculate is an invalid pointer for device private pages, because device private pages are mapped via non-present device private entries, not ordinary present PTEs. Let's just not compute broken pointers and fixup later. Move the proper assignment of the correct subpage to the beginning of the function and assert that we really only have a single page in our folio. This currently results in a BUG when tying to compute anon_exclusive, because: [ 528.727237] BUG: unable to handle page fault for address: ffffea1fffffffc0 [ 528.739585] #PF: supervisor read access in kernel mode [ 528.745324] #PF: error_code(0x0000) - not-present page [ 528.751062] PGD 44eaf2067 P4D 44eaf2067 PUD 0 [ 528.756026] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 528.760890] CPU: 120 PID: 18275 Comm: hmm-tests Not tainted 5.19.0-rc3-kfd-alex #257 [ 528.769542] Hardware name: AMD Corporation BardPeak/BardPeak, BIOS RTY1002BDS 09/17/2021 [ 528.778579] RIP: 0010:try_to_migrate_one+0x21a/0x1000 [ 528.784225] Code: f6 48 89 c8 48 2b 05 45 d1 6a 01 48 c1 f8 06 48 29 c3 48 8b 45 a8 48 c1 e3 06 48 01 cb f6 41 18 01 48 89 85 50 ff ff ff 74 0b <4c> 8b 33 49 c1 ee 11 41 83 e6 01 48 8b bd 48 ff ff ff e8 3f 99 02 [ 528.805194] RSP: 0000:ffffc90003cdfaa0 EFLAGS: 00010202 [ 528.811027] RAX: 00007ffff7ff4000 RBX: ffffea1fffffffc0 RCX: ffffeaffffffffc0 [ 528.818995] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffc90003cdfaf8 [ 528.826962] RBP: ffffc90003cdfb70 R08: 0000000000000000 R09: 0000000000000000 [ 528.834930] R10: ffffc90003cdf910 R11: 0000000000000002 R12: ffff888194450540 [ 528.842899] R13: ffff888160d057c0 R14: 0000000000000000 R15: 03ffffffffffffff [ 528.850865] FS: 00007ffff7fdb740(0000) GS:ffff8883b0600000(0000) knlGS:0000000000000000 [ 528.859891] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 528.866308] CR2: ffffea1fffffffc0 CR3: 00000001562b4003 CR4: 0000000000770ee0 [ 528.874275] PKRU: 55555554 [ 528.877286] Call Trace: [ 528.880016] <TASK> [ 528.882356] ? lock_is_held_type+0xdf/0x130 [ 528.887033] rmap_walk_anon+0x167/0x410 [ 528.891316] try_to_migrate+0x90/0xd0 [ 528.895405] ? try_to_unmap_one+0xe10/0xe10 [ 528.900074] ? anon_vma_ctor+0x50/0x50 [ 528.904260] ? put_anon_vma+0x10/0x10 [ 528.908347] ? invalid_mkclean_vma+0x20/0x20 [ 528.913114] migrate_vma_setup+0x5f4/0x750 [ 528.917691] dmirror_devmem_fault+0x8c/0x250 [test_hmm] [ 528.923532] do_swap_page+0xac0/0xe50 [ 528.927623] ? __lock_acquire+0x4b2/0x1ac0 [ 528.932199] __handle_mm_fault+0x949/0x1440 [ 528.936876] handle_mm_fault+0x13f/0x3e0 [ 528.941256] do_user_addr_fault+0x215/0x740 [ 528.945928] exc_page_fault+0x75/0x280 [ 528.950115] asm_exc_page_fault+0x27/0x30 [ 528.954593] RIP: 0033:0x40366b ... Link: https://lkml.kernel.org/r/20220623205332.319257-1-david@redhat.com Fixes: 6c287605fd56 ("mm: remember exclusively mapped anonymous pages with PG_anon_exclusive") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: "Sierra Guiza, Alejandro (Alex)" <alex.sierra@amd.com> Reviewed-by: Alistair Popple <apopple@nvidia.com> Tested-by: Alistair Popple <apopple@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03riscv/mm: fix build error while PAGE_TABLE_CHECK enabled without MMUYueHaibing1-1/+1
mm/page_table_check.c: In function `__page_table_check_pte_clear': mm/page_table_check.c:148:6: error: implicit declaration of function `pte_user_accessible_page'; did you mean `user_access_save'? [-Werror=implicit-function-declaration] if (pte_user_accessible_page(pte)) { ^~~~~~~~~~~~~~~~~~~~~~~~ user_access_save ARCH_SUPPORTS_PAGE_TABLE_CHECK should only enabled with MMU. Link: https://lkml.kernel.org/r/20220624085236.18544-1-yuehaibing@huawei.com Fixes: 3fee229a8eb9 ("riscv/mm: enable ARCH_SUPPORTS_PAGE_TABLE_CHECK") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Tong Tiangen <tongtiangen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03Documentation: highmem: use literal block for code example in highmem.h commentBagas Sanjaya1-9/+9
When building htmldocs on Linus's tree, there are inline emphasis warnings on include/linux/highmem.h: Documentation/vm/highmem:166: ./include/linux/highmem.h:154: WARNING: Inline emphasis start-string without end-string. Documentation/vm/highmem:166: ./include/linux/highmem.h:157: WARNING: Inline emphasis start-string without end-string. These warnings above are due to comments in code example at the mentioned lines above are enclosed by double dash (--), which confuses Sphinx as inline markup delimiters instead. Fix these warnings by indenting the code example with literal block indentation and making the comments C comments. Link: https://lkml.kernel.org/r/20220622084546.17745-1-bagasdotme@gmail.com Fixes: 85a85e7601263f ("Documentation/vm: move "Using kmap-atomic" to highmem.h") Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Tested-by: Ira Weiny <ira.weiny@intel.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: "Fabio M. De Francesco" <fmdefrancesco@gmail.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03mm: sparsemem: fix missing higher order allocation splittingMuchun Song1-0/+8
Higher order allocations for vmemmap pages from buddy allocator must be able to be treated as indepdenent small pages as they can be freed individually by the caller. There is no problem for higher order vmemmap pages allocated at boot time since each individual small page will be initialized at boot time. However, it will be an issue for memory hotplug case since those higher order vmemmap pages are allocated from buddy allocator without initializing each individual small page's refcount. The system will panic in put_page_testzero() when CONFIG_DEBUG_VM is enabled if the vmemmap page is freed. Link: https://lkml.kernel.org/r/20220620023019.94257-1-songmuchun@bytedance.com Fixes: d8d55f5616cf ("mm: sparsemem: use page table lock to protect kernel pmd operations") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03mm/damon: use set_huge_pte_at() to make huge pte oldBaolin Wang1-2/+1
The huge_ptep_set_access_flags() can not make the huge pte old according to the discussion [1], that means we will always mornitor the young state of the hugetlb though we stopped accessing the hugetlb, as a result DAMON will get inaccurate accessing statistics. So changing to use set_huge_pte_at() to make the huge pte old to fix this issue. [1] https://lore.kernel.org/all/Yqy97gXI4Nqb7dYo@arm.com/ Link: https://lkml.kernel.org/r/1655692482-28797-1-git-send-email-baolin.wang@linux.alibaba.com Fixes: 49f4203aae06 ("mm/damon: add access checking for hugetlb pages") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by: SeongJae Park <sj@kernel.org> Acked-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03sh: convert nommu io{re,un}map() to static inline functionsGeert Uytterhoeven1-2/+6
Recently, nommu iounmap() was converted from a static inline function to a macro again, basically reverting commit 4580ba4ad2e6b8dd ("sh: Convert iounmap() macros to inline functions"). With -Werror, this leads to build failures like: drivers/iio/adc/xilinx-ams.c: In function `ams_iounmap_ps': drivers/iio/adc/xilinx-ams.c:1195:14: error: unused variable `ams' [-Werror=unused-variable] 1195 | struct ams *ams = data; | ^~~ Fix this by replacing the macros for ioremap() and iounmap() by static inline functions, based on <asm-generic/io.h>. Link: https://lkml.kernel.org/r/8d1b1766260961799b04035e7bc39a7f59729f72.1655708312.git.geert+renesas@glider.be Fixes: 13f1fc870dd74713 ("sh: move the ioremap implementation out of line") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reported-by: kernel test robot <lkp@intel.com> Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-03mm: userfaultfd: fix UFFDIO_CONTINUE on fallocated shmem pagesAxel Rasmussen1-1/+4
When fallocate() is used on a shmem file, the pages we allocate can end up with !PageUptodate. Since UFFDIO_CONTINUE tries to find the existing page the user wants to map with SGP_READ, we would fail to find such a page, since shmem_getpage_gfp returns with a "NULL" pagep for SGP_READ if it discovers !PageUptodate. As a result, UFFDIO_CONTINUE returns -EFAULT, as it would do if the page wasn't found in the page cache at all. This isn't the intended behavior. UFFDIO_CONTINUE is just trying to find if a page exists, and doesn't care whether it still needs to be cleared or not. So, instead of SGP_READ, pass in SGP_NOALLOC. This is the same, except for one critical difference: in the !PageUptodate case, SGP_NOALLOC will clear the page and then return it. With this change, UFFDIO_CONTINUE works properly (succeeds) on a shmem file which has been fallocated, but otherwise not modified. Link: https://lkml.kernel.org/r/20220610173812.1768919-1-axelrasmussen@google.com Fixes: 153132571f02 ("userfaultfd/shmem: support UFFDIO_CONTINUE for shmem") Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Acked-by: Peter Xu <peterx@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-26Linux 5.19-rc4Linus Torvalds1-1/+1
2022-06-26Merge tag 'soc-fixes-5.19' of ↵Linus Torvalds37-193/+205
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "A number of fixes have accumulated, but they are largely for harmless issues: - Several OF node leak fixes - A fix to the Exynos7885 UART clock description - DTS fixes to prevent boot failures on TI AM64 and J721s2 - Bus probe error handling fixes for Baikal-T1 - A fixup to the way STM32 SoCs use separate dts files for different firmware stacks - Multiple code fixes for Arm SCMI firmware, all dealing with robustness of the implementation - Multiple NXP i.MX devicetree fixes, addressing incorrect data in DT nodes - Three updates to the MAINTAINERS file, including Florian Fainelli taking over BCM283x/BCM2711 (Raspberry Pi) from Nicolas Saenz Julienne" * tag 'soc-fixes-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) ARM: dts: aspeed: nuvia: rename vendor nuvia to qcom arm: mach-spear: Add missing of_node_put() in time.c ARM: cns3xxx: Fix refcount leak in cns3xxx_init MAINTAINERS: Update email address arm64: dts: ti: k3-am64-main: Remove support for HS400 speed mode arm64: dts: ti: k3-j721s2: Fix overlapping GICD memory region ARM: dts: bcm2711-rpi-400: Fix GPIO line names bus: bt1-axi: Don't print error on -EPROBE_DEFER bus: bt1-apb: Don't print error on -EPROBE_DEFER ARM: Fix refcount leak in axxia_boot_secondary ARM: dts: stm32: move SCMI related nodes in a dedicated file for stm32mp15 soc: imx: imx8m-blk-ctrl: fix display clock for LCDIF2 power domain ARM: dts: imx6qdl-colibri: Fix capacitive touch reset polarity ARM: dts: imx6qdl: correct PU regulator ramp delay firmware: arm_scmi: Fix incorrect error propagation in scmi_voltage_descriptors_get firmware: arm_scmi: Avoid using extended string-buffers sizes if not necessary firmware: arm_scmi: Fix SENSOR_AXIS_NAME_GET behaviour when unsupported ARM: dts: imx7: Move hsic_phy power domain to HSIC PHY node soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe MAINTAINERS: Update BCM2711/BCM2835 maintainer ...
2022-06-26Merge tag 'mm-hotfixes-stable-2022-06-26' of ↵Linus Torvalds15-35/+117
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull hotfixes from Andrew Morton: "Minor things, mainly - mailmap updates, MAINTAINERS updates, etc. Fixes for this merge window: - fix for a damon boot hang, from SeongJae - fix for a kfence warning splat, from Jason Donenfeld - fix for zero-pfn pinning, from Alex Williamson - fix for fallocate hole punch clearing, from Mike Kravetz Fixes for previous releases: - fix for a performance regression, from Marcelo - fix for a hwpoisining BUG from zhenwei pi" * tag 'mm-hotfixes-stable-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: add entry for Christian Marangi mm/memory-failure: disable unpoison once hw error happens hugetlbfs: zero partial pages during fallocate hole punch mm: memcontrol: reference to tools/cgroup/memcg_slabinfo.py mm: re-allow pinning of zero pfns mm/kfence: select random number before taking raw lock MAINTAINERS: add maillist information for LoongArch MAINTAINERS: update MM tree references MAINTAINERS: update Abel Vesa's email MAINTAINERS: add MEMORY HOT(UN)PLUG section and add David as reviewer MAINTAINERS: add Miaohe Lin as a memory-failure reviewer mailmap: add alias for jarkko@profian.com mm/damon/reclaim: schedule 'damon_reclaim_timer' only after 'system_wq' is initialized kthread: make it clear that kthread_create_on_node() might be terminated by any fatal signal mm: lru_cache_disable: use synchronize_rcu_expedited mm/page_isolation.c: fix one kernel-doc comment
2022-06-26Merge tag 'perf-tools-fixes-for-v5.19-2022-06-26' of ↵Linus Torvalds11-104/+369
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Enable ignore_missing_thread in 'perf stat', enabling counting with '--pid' when threads disappear during counting session setup - Adjust output data offset for backward compatibility in 'perf inject' - Fix missing free in copy_kcore_dir() in 'perf inject' - Fix caching files with a wrong build ID - Sync drm, cpufeatures, vhost and svn headers with the kernel * tag 'perf-tools-fixes-for-v5.19-2022-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: tools headers UAPI: Synch KVM's svm.h header with the kernel tools include UAPI: Sync linux/vhost.h with the kernel sources perf stat: Enable ignore_missing_thread perf inject: Adjust output data offset for backward compatibility perf trace beauty: Fix generation of errno id->str table on ALT Linux perf build-id: Fix caching files with a wrong build ID tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources perf inject: Fix missing free in copy_kcore_dir()
2022-06-26Merge tag 'for-5.19-rc3-tag' of ↵Linus Torvalds11-30/+158
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - zoned relocation fixes: - fix critical section end for extent writeback, this could lead to out of order write - prevent writing to previous data relocation block group if space gets low - reflink fixes: - fix race between reflinking and ordered extent completion - proper error handling when block reserve migration fails - add missing inode iversion/mtime/ctime updates on each iteration when replacing extents - fix deadlock when running fsync/fiemap/commit at the same time - fix false-positive KCSAN report regarding pid tracking for read locks and data race - minor documentation update and link to new site * tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Documentation: update btrfs list of features and link to readthedocs.io btrfs: fix deadlock with fsync+fiemap+transaction commit btrfs: don't set lock_owner when locking extent buffer for reading btrfs: zoned: fix critical section of relocation inode writeback btrfs: zoned: prevent allocation from previous data relocation BG btrfs: do not BUG_ON() on failure to migrate space when replacing extents btrfs: add missing inode updates on each iteration when replacing extents btrfs: fix race between reflinking and ordered extent completion
2022-06-26Merge tag 'dma-mapping-5.19-2022-06-26' of ↵Linus Torvalds1-3/+2
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fix from Christoph Hellwig: - pass the correct size to dma_set_encrypted() when freeing memory (Dexuan Cui) * tag 'dma-mapping-5.19-2022-06-26' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: use the correct size for dma_set_encrypted()
2022-06-26Merge tag 'for-5.19/fbdev-2' of ↵Linus Torvalds9-31/+21
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: "Two bug fixes for the pxa3xx and intelfb drivers: - pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write - intelfb: Initialize value of stolen size The other changes are small cleanups, simplifications and documentation updates to the cirrusfb, skeletonfb, omapfb, intelfb, au1100fb and simplefb drivers" * tag 'for-5.19/fbdev-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: video: fbdev: omap: Remove duplicate 'the' in comment video: fbdev: omapfb: Align '*' in comment video: fbdev: simplefb: Check before clk_put() not needed video: fbdev: au1100fb: Drop unnecessary NULL ptr check video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_write video: fbdev: skeletonfb: Convert to generic power management video: fbdev: cirrusfb: Remove useless reference to PCI power management video: fbdev: intelfb: Initialize value of stolen size video: fbdev: intelfb: Use aperture size from pci_resource_len video: fbdev: skeletonfb: Fix syntax errors in comments
2022-06-26Merge tag 'for-5.19/parisc-3' of ↵Linus Torvalds5-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - enable ARCH_HAS_STRICT_MODULE_RWX to prevent a boot crash on c8000 machines - flush all mappings of a shared anonymous page on PA8800/8900 machines via flushing the whole data cache. This may slow down such machines but makes sure that the cache is consistent - Fix duplicate definition build error regarding fb_is_primary_device() * tag 'for-5.19/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable ARCH_HAS_STRICT_MODULE_RWX parisc: Fix flush_anon_page on PA8800/PA8900 parisc: align '*' in comment in math-emu code parisc/stifb: Fix fb_is_primary_device() only available with CONFIG_FB_STI
2022-06-26Merge tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensaLinus Torvalds3-1/+3
Pull xtensa fixes from Max Filippov: - fix OF reference leaks in xtensa arch code - replace '.bss' with '.section .bss' to fix entry.S build with old assembler * tag 'xtensa-20220626' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: change '.bss' to '.section .bss' xtensa: xtfpga: Fix refcount leak bug in setup xtensa: Fix refcount leak bug in time.c
2022-06-26Merge tag 'powerpc-5.19-3' of ↵Linus Torvalds13-40/+83
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - A fix for a CMA change that broke booting guests with > 2G RAM on Power8 hosts. - Fix the RTAS call filter to allow a special case that applications rely on. - A change to our execve path, to make the execve syscall exit tracepoint work. - Three fixes to wire up our various RNGs earlier in boot so they're available for use in the initial seeding in random_init(). - A build fix for when KASAN is enabled along with STRUCTLEAK_BYREF_ALL. Thanks to Andrew Donnellan, Aneesh Kumar K.V, Christophe Leroy, Jason Donenfeld, Nathan Lynch, Naveen N. Rao, Sathvika Vasireddy, Sumit Dubey2, Tyrel Datwyler, and Zi Yan. * tag 'powerpc-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/powernv: wire up rng during setup_arch powerpc/prom_init: Fix build failure with GCC_PLUGIN_STRUCTLEAK_BYREF_ALL and KASAN powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address powerpc: Enable execve syscall exit tracepoint powerpc/pseries: wire up rng during setup_arch() powerpc/microwatt: wire up rng during setup_arch() powerpc/mm: Move CMA reservations after initmem_init()
2022-06-26Merge tag 'kbuild-fixes-v5.19-2' of ↵Linus Torvalds4-4/+13
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix modpost to detect EXPORT_SYMBOL marked as __init or__exit - Update the supported arch list in the LLVM document - Avoid the second link of vmlinux for CONFIG_TRIM_UNUSED_KSYMS - Avoid false __KSYM___this_module define in include/generated/autoksyms.h * tag 'kbuild-fixes-v5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Ignore __this_module in gen_autoksyms.sh kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt) Documentation/llvm: Update Supported Arch table modpost: fix section mismatch check for exported init/exit sections
2022-06-26Merge tag 'exfat-for-5.19-rc4' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat Pull exfat fix from Namjae Jeon: - Use updated exfat_chain directly instead of snapshot values in rename. * tag 'exfat-for-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: use updated exfat_chain directly during renaming
2022-06-26Merge tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds8-139/+366
Pull cifs client fixes from Steve French: "Fixes addressing important multichannel, and reconnect issues. Multichannel mounts when the server network interfaces changed, or ip addresses changed, uncovered problems, especially in reconnect, but the patches for this were held up until recently due to some lock conflicts that are now addressed. Included in this set of fixes: - three fixes relating to multichannel reconnect, dynamically adjusting the list of server interfaces to avoid problems during reconnect - a lock conflict fix related to the above - two important fixes for negotiate on secondary channels (null netname can unintentionally cause multichannel to be disabled to some servers) - a reconnect fix (reporting incorrect IP address in some cases)" * tag '5.19-rc3-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update cifs_ses::ip_addr after failover cifs: avoid deadlocks while updating iface cifs: periodically query network interfaces from server cifs: during reconnect, update interface if necessary cifs: change iface_list from array to sorted linked list smb3: use netname when available on secondary channels smb3: fix empty netname context on secondary channels
2022-06-26tools headers UAPI: Synch KVM's svm.h header with the kernelArnaldo Carvalho de Melo1-0/+13
To pick up the changes from: d5af44dde5461d12 ("x86/sev: Provide support for SNP guest request NAEs") 0afb6b660a6b58cb ("x86/sev: Use SEV-SNP AP creation to start secondary CPUs") dc3f3d2474b80eae ("x86/mm: Validate memory when changing the C-bit") cbd3d4f7c4e5a93e ("x86/sev: Check SEV-SNP features support") That gets these new SVM exit reasons: + { SVM_VMGEXIT_PSC, "vmgexit_page_state_change" }, \ + { SVM_VMGEXIT_GUEST_REQUEST, "vmgexit_guest_request" }, \ + { SVM_VMGEXIT_EXT_GUEST_REQUEST, "vmgexit_ext_guest_request" }, \ + { SVM_VMGEXIT_AP_CREATION, "vmgexit_ap_creation" }, \ + { SVM_VMGEXIT_HV_FEATURES, "vmgexit_hypervisor_feature" }, \ Addressing this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h' diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h This causes these changes: CC /tmp/build/perf-urgent/arch/x86/util/kvm-stat.o LD /tmp/build/perf-urgent/arch/x86/util/perf-in.o LD /tmp/build/perf-urgent/arch/x86/perf-in.o LD /tmp/build/perf-urgent/arch/perf-in.o LD /tmp/build/perf-urgent/perf-in.o LINK /tmp/build/perf-urgent/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-26tools include UAPI: Sync linux/vhost.h with the kernel sourcesArnaldo Carvalho de Melo1-6/+20
To get the changes in: 84d7c8fd3aade2fe ("vhost-vdpa: introduce uAPI to set group ASID") 2d1fcb7758e49fd9 ("vhost-vdpa: uAPI to get virtqueue group id") a0c95f201170bd55 ("vhost-vdpa: introduce uAPI to get the number of address spaces") 3ace88bd37436abc ("vhost-vdpa: introduce uAPI to get the number of virtqueue groups") 175d493c3c3e09a3 ("vhost: move the backend feature bits to vhost_types.h") Silencing this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h' diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h To pick up these changes and support them: $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after $ diff -u before after --- before 2022-06-26 12:04:35.982003781 -0300 +++ after 2022-06-26 12:04:43.819972476 -0300 @@ -28,6 +28,7 @@ [0x74] = "VDPA_SET_CONFIG", [0x75] = "VDPA_SET_VRING_ENABLE", [0x77] = "VDPA_SET_CONFIG_CALL", + [0x7C] = "VDPA_SET_GROUP_ASID", }; static const char *vhost_virtio_ioctl_read_cmds[] = { [0x00] = "GET_FEATURES", @@ -39,5 +40,8 @@ [0x76] = "VDPA_GET_VRING_NUM", [0x78] = "VDPA_GET_IOVA_RANGE", [0x79] = "VDPA_GET_CONFIG_SIZE", + [0x7A] = "VDPA_GET_AS_NUM", + [0x7B] = "VDPA_GET_VRING_GROUP", [0x80] = "VDPA_GET_VQS_COUNT", + [0x81] = "VDPA_GET_GROUP_NUM", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Gautam Dawar <gautam.dawar@xilinx.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/lkml/Yrh3xMYbfeAD0MFL@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-26perf stat: Enable ignore_missing_threadGang Li1-0/+2
perf already support ignore_missing_thread for -p, but not yet applied to `perf stat -p <pid>`. This patch enables ignore_missing_thread for `perf stat -p <pid>`. Committer notes: And here is a refresher about the 'ignore_missing_thread' knob, from a previous patch using it: ca8000684ec4e66f ("perf evsel: Enable ignore_missing_thread for pid option") --- While monitoring a multithread process with pid option, perf sometimes may return sys_perf_event_open failure with 3(No such process) if any of the process's threads die before we open the event. However, we want perf continue monitoring the remaining threads and do not exit with error. --- Signed-off-by: Gang Li <ligang.bdlg@bytedance.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220622030037.15005-1-ligang.bdlg@bytedance.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-26perf inject: Adjust output data offset for backward compatibilityRaul Silvera3-1/+17
When 'perf inject' creates a new file, it reuses the data offset from the input file. If there has been a change on the size of the header, as happened in v5.12 -> v5.13, the new offsets will be wrong, resulting in a corrupted output file. This change adds the function perf_session__data_offset to compute the data offset based on the current header size, and uses that instead of the offset from the original input file. Signed-off-by: Raul Silvera <rsilvera@google.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Colin Ian King <colin.king@intel.com> Cc: Dave Marchevsky <davemarchevsky@fb.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220621152725.2668041-1-rsilvera@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-26perf trace beauty: Fix generation of errno id->str table on ALT LinuxArnaldo Carvalho de Melo1-12/+2
For some reason using: cat <<EoFuncBegin static const char *errno_to_name__$arch(int err) { switch (err) { EoFuncBegin In tools/perf/trace/beauty/arch_errno_names.sh isn't working on ALT Linux sisyphus (development version), which could be some distro specific glitch, so just get this done in an alternative way that works everywhere while giving notice to the people working on that distro to try and figure our what really took place. Cc: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-26perf build-id: Fix caching files with a wrong build IDAdrian Hunter1-0/+28
Build ID events associate a file name with a build ID. However, when using perf inject, there is no guarantee that the file on the current machine at the current time has that build ID. Fix by comparing the build IDs and skip adding to the cache if they are different. Example: $ echo "int main() {return 0;}" > prog.c $ gcc -o prog prog.c $ perf record --buildid-all ./prog [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.019 MB perf.data ] $ file-buildid() { file $1 | awk -F= '{print $2}' | awk -F, '{print $1}' ; } $ file-buildid prog 444ad9be165d8058a48ce2ffb4e9f55854a3293e $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf 444ad9be165d8058a48ce2ffb4e9f55854a3293e $ echo "int main() {return 1;}" > prog.c $ gcc -o prog prog.c $ file-buildid prog 885524d5aaa24008a3e2b06caa3ea95d013c0fc5 Before: $ perf buildid-cache --purge $(pwd)/prog $ perf inject -i perf.data -o junk $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf 885524d5aaa24008a3e2b06caa3ea95d013c0fc5 $ After: $ perf buildid-cache --purge $(pwd)/prog $ perf inject -i perf.data -o junk $ file-buildid ~/.debug/$(pwd)/prog/444ad9be165d8058a48ce2ffb4e9f55854a3293e/elf $ Fixes: 454c407ec17a0c63 ("perf: add perf-inject builtin") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Tom Zanussi <tzanussi@gmail.com> Link: https://lore.kernel.org/r/20220621125144.5623-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-26tools headers cpufeatures: Sync with the kernel sourcesArnaldo Carvalho de Melo2-3/+12
To pick the changes from: d6d0c7f681fda1d0 ("x86/cpufeatures: Add PerfMonV2 feature bit") 296d5a17e793956f ("KVM: SEV-ES: Use V_TSC_AUX if available instead of RDTSC/MSR_TSC_AUX intercepts") f30903394eb62316 ("x86/cpufeatures: Add virtual TSC_AUX feature bit") 8ad7e8f696951f19 ("x86/fpu/xsave: Support XSAVEC in the kernel") 59bd54a84d15e933 ("x86/tdx: Detect running as a TDX guest in early boot") a77d41ac3a0f41c8 ("x86/cpufeatures: Add AMD Fam19h Branch Sampling feature") This only causes these perf files to be rebuilt: CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o And addresses this perf build warning: Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h' diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Cc: Babu Moger <babu.moger@amd.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Cc: Stephane Eranian <eranian@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/YrDkgmwhLv+nKeOo@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-26tools headers UAPI: Sync drm/i915_drm.h with the kernel sourcesArnaldo Carvalho de Melo1-81/+272
To pick up the changes in: ecf8eca51f33dbfd ("drm/i915/xehp: Add compute engine ABI") 991b4de3275728fd ("drm/i915/uapi: Add kerneldoc for engine class enum") c94fde8f516610b0 ("drm/i915/uapi: Add DRM_I915_QUERY_GEOMETRY_SUBSLICES") 1c671ad753dbbf5f ("drm/i915/doc: Link query items to their uapi structs") a2e5402691e23269 ("drm/i915/doc: Convert perf UAPI comments to kerneldoc") 462ac1cdf4d7acf1 ("drm/i915/doc: Convert drm_i915_query_topology_info comment to kerneldoc") 034d47b25b2ce627 ("drm/i915/uapi: Document DRM_I915_QUERY_HWCONFIG_BLOB") 78e1fb3112c0ac44 ("drm/i915/uapi: Add query for hwconfig blob") That don't add any new ioctl, so no changes in tooling. This silences this perf build warning: Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h' diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h Cc: John Harrison <John.C.Harrison@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://lore.kernel.org/lkml/YrDi4ALYjv9Mdocq@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-26perf inject: Fix missing free in copy_kcore_dir()Adrian Hunter1-1/+3
Free string allocated by asprintf(). Fixes: d8fc08550929bb84 ("perf inject: Keep a copy of kcore_dir") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Link: https://lore.kernel.org/r/20220620103904.7960-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-06-26parisc: Enable ARCH_HAS_STRICT_MODULE_RWXHelge Deller1-0/+1
Fix a boot crash on a c8000 machine as reported by Dave. Basically it changes patch_map() to return an alias mapping to the to-be-patched code in order to prevent writing to write-protected memory. Signed-off-by: Helge Deller <deller@gmx.de> Suggested-by: John David Anglin <dave.anglin@bell.net> Cc: stable@vger.kernel.org # v5.2+ Link: https://lore.kernel.org/all/e8ec39e8-25f8-e6b4-b7ed-4cb23efc756e@bell.net/
2022-06-26parisc: Fix flush_anon_page on PA8800/PA8900John David Anglin1-1/+4
Anonymous pages are allocated with the shared mappings colouring, SHM_COLOUR. Since the alias boundary on machines with PA8800 and PA8900 processors is unknown, flush_user_cache_page() might not flush all mappings of a shared anonymous page. Flushing the whole data cache flushes all mappings. This won't fix all coherency issues with shared mappings but it seems to work well in practice. I haven't seen any random memory faults in almost a month on a rp3440 running as a debian buildd machine. There is a small preformance hit. Signed-off-by: John David Anglin <dave.anglin@bell.net> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org # v5.18+
2022-06-26parisc: align '*' in comment in math-emu codeJiang Jian1-1/+1
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Helge Deller <deller@gmx.de>
2022-06-26kbuild: Ignore __this_module in gen_autoksyms.shSami Tolvanen1-0/+3
Module object files can contain an undefined reference to __this_module, which isn't resolved until we link the final .ko. The kernel doesn't export this symbol, so ignore it in gen_autoksyms.sh. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Steve Muckle <smuckle@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Ramji Jiyani <ramjiyani@google.com>
2022-06-26kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)Masahiro Yamada1-1/+1
If CONFIG_TRIM_UNUSED_KSYMS is enabled and the kernel is built from a pristine state, the vmlinux is linked twice. Commit 3fdc7d3fe4c0 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS") explains why this happens, but it did not fix the issue at all. Now I realized I had applied a wrong patch. In v1 patch [1], the autoksyms_recursive target correctly recurses to "$(MAKE) -f $(srctree)/Makefile autoksyms_recursive". In v2 patch [2], I accidentally dropped the diff line, and it recurses to "$(MAKE) -f $(srctree)/Makefile vmlinux". Restore the code I intended in v1. [1]: https://lore.kernel.org/linux-kbuild/1521045861-22418-8-git-send-email-yamada.masahiro@socionext.com/ [2]: https://lore.kernel.org/linux-kbuild/1521166725-24157-8-git-send-email-yamada.masahiro@socionext.com/ Fixes: 3fdc7d3fe4c0 ("kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
2022-06-25Merge tag 'char-misc-5.19-rc4' of ↵Linus Torvalds25-52/+92
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull IIO driver fixes from Greg KH: "Here are a set of IIO driver fixes for 5.19-rc4. Jonathan said it best in his pull request to me, so I'll just quote it here below, as that's the only changes we have right now for the char-misc driver tree: testing: - Fix a missing MODULE_LICENSE() warning by restricting possible build configs. Various drivers: - Fix ordering of iio_get_trigger() being called before iio_trigger_register() adi,admv1014: - Fix dubious x & !y warning. adi,axi-adc: - Fix missing of_node_put() in error and normal paths. aspeed,adc: - Add missing of_node_put() fsl,mma8452: - Fix broken probing from device tree. - Drop check on return value of i2c write to device to cause reset as ACK will be missing (device reset before sending it). fsl,vf610: - Fix documentation of in_conversion_mode ABI. iio-trig-sysfs: - Ensure irq work has finished before freeing the trigger. invensense,mpu3050: - Disable regulators in error path. invensense,icm42600: - Fix collision of enum value of 0 with error path where 0 is no match. renesas,rzg2l_Adc: - Add missing fwnode_handle_put() in error path. rescale: - Fix a boolean logic bug for detection of raw + scale affecting an obscure corner case. semtech,sx9324: - Check return value of read of pin_defs st,stm32-adc: - Fix interaction across ADC instances for some supported devices. - Drop false spurious IRQ messages. - Fix calibration value handling. If we can't calibrate don't expose the vref_int channel. - Fix maximum clock rate for stm32pm15x ti,ads131e08: - Add missing fwnode_handle_put() in error paths. xilinx,ams: - Fix variable checked for error from platform_get_irq() x-powers,axp288: - Overide TS_PIN bias current for boards where it is not correctly initialized. yamaha,yas530: - Fix inverted check on calibration data being all zeros. All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits) iio:proximity:sx9324: Check ret value of device_property_read_u32_array() iio: accel: mma8452: ignore the return value of reset operation iio: adc: stm32: fix maximum clock rate for stm32mp15x iio: adc: stm32: fix vrefint wrong calibration value handling iio: imu: inv_icm42600: Fix broken icm42600 (chip id 0 value) iio: adc: vf610: fix conversion mode sysfs node name iio: adc: adi-axi-adc: Fix refcount leak in adi_axi_adc_attach_client iio: test: fix missing MODULE_LICENSE for IIO_RESCALE=m iio:humidity:hts221: rearrange iio trigger get and register iio:chemical:ccs811: rearrange iio trigger get and register iio:accel:mxc4005: rearrange iio trigger get and register iio:accel:kxcjk-1013: rearrange iio trigger get and register iio:accel:bma180: rearrange iio trigger get and register iio: afe: rescale: Fix boolean logic bug iio: adc: aspeed: Fix refcount leak in aspeed_adc_set_trim_data iio: adc: stm32: Fix IRQs on STM32F4 by removing custom spurious IRQs message iio: adc: stm32: Fix ADCs iteration in irq handler iio: adc: ti-ads131e08: add missing fwnode_handle_put() in ads131e08_alloc_channels() iio: adc: rzg2l_adc: add missing fwnode_handle_put() in rzg2l_adc_parse_properties() iio: trigger: sysfs: fix use-after-free on remove ...
2022-06-25Merge tag 'usb-5.19-rc4' of ↵Linus Torvalds13-48/+124
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB driver fixes from Greg KH: "Here are some small USB driver fixes and new device ids for 5.19-rc4 for a few small reported issues. They include: - new usb-serial driver ids - MAINTAINERS file update to properly catch the USB dts files - dt-bindings fixes for reported build warnings - xhci driver fixes for reported problems - typec Kconfig dependancy fix - raw_gadget fuzzing fixes found by syzbot - chipidea driver bugfix - usb gadget uvc bugfix All of these have been in linux-next with no reported issues" * tag 'usb-5.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: chipidea: udc: check request status before setting device address USB: gadget: Fix double-free bug in raw_gadget driver xhci-pci: Allow host runtime PM as default for Intel Meteor Lake xHCI xhci-pci: Allow host runtime PM as default for Intel Raptor Lake xHCI xhci: turn off port power in shutdown xhci: Keep interrupt disabled in initialization until host is running. USB: serial: option: add Quectel RM500K module support USB: serial: option: add Quectel EM05-G modem USB: serial: pl2303: add support for more HXN (G) types usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMIC usb: gadget: uvc: fix list double add in uvcg_video_pump dt-bindings: usb: ehci: Increase the number of PHYs dt-bindings: usb: ohci: Increase the number of PHYs usb: gadget: Fix non-unique driver names in raw-gadget driver MAINTAINERS: add include/dt-bindings/usb to USB SUBSYSTEM USB: serial: option: add Telit LE910Cx 0x1250 composition
2022-06-25Merge tag 'loongarch-fixes-5.19-3' of ↵Linus Torvalds7-15/+13
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch fixes from Huacai Chen: "Some bug fixes and a trivial cleanup" * tag 'loongarch-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch: Make compute_return_era() return void LoongArch: Fix wrong fpu version LoongArch: Fix EENTRY/MERRENTRY setting in setup_tlb_handler() LoongArch: Fix sleeping in atomic context in setup_tlb_handler() LoongArch: Fix the _stext symbol address LoongArch: Fix the !THP build
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-24 11:44:00 +0000