summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-02-20RAS: Introduce a FRU memory poison managerYazen Ghannam4-0/+831
Memory errors are an expected occurrence on systems with high memory density. Generally, errors within a small number of unique physical locations are acceptable, based on manufacturer and/or admin policy. During run time, memory with errors may be retired so it is no longer used by the system. This is done in mm through page poisoning, and the effect will remain until the system is restarted. If a memory location is consistently faulty, then the same run time error handling may occur in the next reboot cycle, leading to terminating jobs due to that already known bad memory. This could be prevented if information from the previous boot was not lost. Some add-in cards with driver-managed memory have on-board persistent storage. Their driver saves memory error information to the persistent storage during run time. The information is then restored after reset, and known bad memory will be retired before the hardware is used. A running log of bad memory locations is kept across multiple resets. A similar solution is desirable for CPUs. However, this solution should leverage industry-standard components as much as possible, rather than a bespoke platform driver. Two components are needed: a record format and a persistent storage interface. Implement a new module to manage the record formats on persistent storage. Use the requirements for an AMD MI300-based system to start. Vendor- and platform-specific details can be abstracted later as needed. [ bp: Massage commit message and code, squash 30-ish more fixes from Yazen and me. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Co-developed-by: <naveenkrishna.chatradhi@amd.com> Signed-off-by: <naveenkrishna.chatradhi@amd.com> Co-developed-by: <muralidhara.mk@amd.com> Signed-off-by: <muralidhara.mk@amd.com> Tested-by: <sathyapriya.k@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240214033516.1344948-3-yazen.ghannam@amd.com
2024-02-14RAS/AMD/ATL: Add MI300 row retirement supportYazen Ghannam3-0/+54
DRAM row retirement depends on model-specific information that is best done within the AMD Address Translation Library. Export a generic wrapper function for other modules to use. Add any model-specific helpers here. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240214033516.1344948-2-yazen.ghannam@amd.com
2024-02-14Documentation: Move RAS section to admin-guideBorislav Petkov (AMD)8-22/+16
This is where this stuff should be. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/87a5pes8jy.fsf@meer.lwn.net
2024-02-01RAS/AMD/ATL: Add MI300 DRAM to normalized address translation supportYazen Ghannam3-2/+205
Zen-based AMD systems report DRAM ECC errors through Unified Memory Controller (UMC) MCA banks. The value provided in MCA_ADDR is a "normalized" address which represents the UMC's view of its managed memory. The normalized address must be translated to a system physical address for software to take action. MI300 systems, uniquely, do not provide a normalized address in MCA_ADDR for DRAM ECC errors. Rather, the "DRAM" address is reported. This value includes identifiers for the bank, row, column, pseudochannel and stack of the memory location. The DRAM address must be converted to a normalized address in order to be further translated to a system physical address. Add helper functions to do the DRAM to normalized translation for MI300 systems. The method is based on the fixed hardware layout of the on-chip memory. [ bp: Massage commit message, decapitalize some, rename function. ] Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Co-developed-by: Muralidhara M K <muralidhara.mk@amd.com> Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Tested-by: Muralidhara M K <muralidhara.mk@amd.com> Link: https://lore.kernel.org/r/20240131165732.88297-1-yazen.ghannam@amd.com
2024-01-31RAS/AMD/ATL: Fix array overflow in get_logical_coh_st_fabric_id_mi300()Dan Carpenter1-1/+1
Check against ARRAY_SIZE() which is the number of elements instead of sizeof() which is the number of bytes. Fixes: 453f0ae79732 ("RAS/AMD/ATL: Add MI300 support") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/279c8b5e-6c00-467a-9071-9c67926abea4@moroto.mountain
2024-01-29RAS/AMD/ATL: Add MI300 supportMuralidhara M K8-5/+309
AMD MI300 systems include on-die HBM3 memory and a unique topology. And they fall under Data Fabric version 4.5 in overall design. Generally, topology information (IDs, etc.) is gathered from Data Fabric registers. However, the unique topology for MI300 means that some topology information is fixed in hardware and follows arbitrary mappings. Furthermore, not all hardware instances are software-visible, so register accesses must be adjusted. Recognize and add helper functions for the new MI300 interleave modes. Add lookup tables for fixed values where appropriate. Adjust how Die and Node IDs are found and used. Also, fix some register bitmasks that were mislabeled. Signed-off-by: Muralidhara M K <muralidhara.mk@amd.com> Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240128155950.1434067-1-yazen.ghannam@amd.com
2024-01-24Documentation: RAS: Add index and address translation sectionYazen Ghannam5-9/+43
There are a lot of RAS topic to document, and there are a lot of details for each topic. Prep for this by adding an index for the RAS directory. This will provide a top-level document and table of contents. It also provides the option to build the RAS directory individually using "make SPHINXDIRS=". Start a section on address translation. This will be expanded with details for future translation methods and how they're used in the kernel. Move the error decoding topic to its own section. Links to other error decoding kernel docs will be added. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240123041401.79812-4-yazen.ghannam@amd.com
2024-01-24EDAC/amd64: Use new AMD Address Translation LibraryYazen Ghannam2-277/+10
Remove old address translation code and use the new AMD Address Translation Library. Use "imply" in Kconfig so that the "AMD_ATL" config option takes the value of "EDAC_AMD64" as its default. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240123041401.79812-3-yazen.ghannam@amd.com
2024-01-24RAS: Introduce AMD Address Translation LibraryYazen Ghannam16-0/+3336
AMD Zen-based systems report memory errors through Machine Check banks representing Unified Memory Controllers (UMCs). The address value reported for DRAM ECC errors is a "normalized address" that is relative to the UMC. This normalized address must be converted to a system physical address to be usable by the OS. Support for this address translation was introduced to the MCA subsystem with Zen1 systems. The code was later moved to the AMD64 EDAC module, since this was the only user of the code at the time. However, there are uses for this translation outside of EDAC. The system physical address can be used in MCA for preemptive page offlining as done in some MCA notifier functions. Also, this translation is needed as the basis of similar functionality needed for some CXL configurations on AMD systems. Introduce a common address translation library that can be used for multiple subsystems including MCA, EDAC, and CXL. Include support for UMC normalized to system physical address translation for current CPU systems. The Data Fabric Indirect register access offsets and one of the register fields were changed. Default to the current offsets and register field definition. And fallback to the older values if running on a "legacy" system. Provide built-in code to facilitate the loading and unloading of the library module without affecting other modules or built-in code. Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20240123041401.79812-2-yazen.ghannam@amd.com
2024-01-21Linux 6.8-rc1Linus Torvalds1-2/+2
2024-01-21Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefsLinus Torvalds78-1426/+1629
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ...
2024-01-21Merge tag 'timers-core-2024-01-21' of ↵Linus Torvalds7-12/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
2024-01-21Merge tag 'powerpc-6.8-2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
2024-01-21bcachefs: Improve inode_to_text()Kent Overstreet1-7/+18
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: logged_ops_format.hKent Overstreet2-27/+31
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: reflink_format.hKent Overstreet3-47/+48
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs; extents_format.hKent Overstreet2-279/+284
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: ec_format.hKent Overstreet2-16/+20
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: subvolume_format.hKent Overstreet2-32/+36
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: snapshot_format.hKent Overstreet2-33/+37
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: alloc_background_format.hKent Overstreet2-93/+94
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: xattr_format.hKent Overstreet2-15/+20
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: dirent_format.hKent Overstreet2-39/+43
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: inode_format.hKent Overstreet2-164/+167
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs; quota_format.hKent Overstreet2-42/+48
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: sb-counters_format.hKent Overstreet2-95/+100
bcachefs_format.h has gotten too big; let's do some organizing. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: counters.c -> sb-counters.cKent Overstreet5-8/+7
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: comment bch_subvolumeKent Overstreet1-0/+3
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch_snapshot::btimeKent Overstreet2-0/+3
Add a field to bch_snapshot for creation time; this will be important when we start exposing the snapshot tree to userspace. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: add missing __GFP_NOWARNKent Overstreet1-1/+1
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: opts->compression can now also be applied in the backgroundKent Overstreet11-23/+24
The "apply this compression method in the background" paths now use the compression option if background_compression is not set; this means that setting or changing the compression option will cause existing data to be compressed accordingly in the background. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Prep work for variable size btree node buffersKent Overstreet18-97/+87
bcachefs btree nodes are big - typically 256k - and btree roots are pinned in memory. As we're now up to 18 btrees, we now have significant memory overhead in mostly empty btree roots. And in the future we're going to start enforcing that certain btree node boundaries exist, to solve lock contention issues - analagous to XFS's AGIs. Thus, we need to start allocating smaller btree node buffers when we can. This patch changes code that refers to the filesystem constant c->opts.btree_node_size to refer to the btree node buffer size - btree_buf_bytes() - where appropriate. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: grab s_umount only if snapshottingSu Yue1-6/+5
When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469670] 2 locks held by bcachefs/35533: [ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs] [ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.470744] stack backtrace: [ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85 [ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 3437.471694] Call Trace: [ 3437.471795] <TASK> [ 3437.471884] dump_stack_lvl+0x57/0x90 [ 3437.472035] check_noncircular+0x132/0x150 [ 3437.472202] __lock_acquire+0x1455/0x21b0 [ 3437.472369] lock_acquire+0xc6/0x2b0 [ 3437.472518] ? filename_create+0x62/0x190 [ 3437.472683] ? lock_is_held_type+0x97/0x110 [ 3437.472856] mnt_want_write+0x46/0x1a0 [ 3437.473025] ? filename_create+0x62/0x190 [ 3437.473204] filename_create+0x62/0x190 [ 3437.473380] user_path_create+0x2d/0x50 [ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.473819] ? lock_acquire+0xc6/0x2b0 [ 3437.474002] ? __fget_files+0x2a/0x190 [ 3437.474195] ? __fget_files+0xbc/0x190 [ 3437.474380] ? lock_release+0xc5/0x270 [ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0 [ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs] [ 3437.475090] __x64_sys_ioctl+0x93/0xd0 [ 3437.475277] do_syscall_64+0x42/0xf0 [ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.475691] RIP: 0033:0x7f2743c313af ====================================================== In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally and unlock it at the end of the function. There is a comment "why do we need this lock?" about the lock coming from commit 42d237320e98 ("bcachefs: Snapshot creation, deletion") The reason is that __bch2_ioctl_subvolume_create() calls sync_inodes_sb() which enforce locked s_umount to writeback all dirty nodes before doing snapshot works. Fix it by read locking s_umount for snapshotting only and unlocking s_umount after sync_inodes_sb(). Signed-off-by: Su Yue <glass.su@suse.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exitSu Yue1-1/+1
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bios must be 512 byte alginedKent Overstreet1-0/+4
Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check Reported-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: remove redundant variable tmpColin Ian King1-3/+1
The variable tmp is being assigned a value but it isn't being read afterwards. The assignment is redundant and so tmp can be removed. Cleans up clang scan build warning: warning: Although the value stored to 'ret' is used in the enclosing expression, the value is never actually read from 'ret' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Improve trace_trans_restart_relockKent Overstreet5-24/+44
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Fix excess transaction restarts in __bchfs_fallocate()Kent Overstreet4-16/+35
drop_locks_do() should not be used in a fastpath without first trying the do in nonblocking mode - the unlock and relock will cause excessive transaction restarts and potentially livelocking with other threads that are contending for the same locks. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: extents_to_bp_stateKent Overstreet1-48/+41
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bkey_and_val_eq()Kent Overstreet1-3/+8
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Better journal tracepointsKent Overstreet2-60/+79
Factor out bch2_journal_bufs_to_text(), and use it in the journal_entry_full() tracepoint; when we can't get a journal reservation we need to know the outstanding journal entry sizes to know if the problem is due to excessive flushing. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Print size of superblock with space allocatedKent Overstreet1-1/+3
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Avoid flushing the journal in the discard pathKent Overstreet1-19/+41
When issuing discards, we may need to flush the journal if there's too many buckets that can't be discarded until a journal flush. But the heuristic was bad; we should be comparing the number of buckets that need to flushes against the number of free buckets, not the number of buckets we saw. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Improve move_extent tracepointKent Overstreet5-7/+48
Also print out the data_opts, so that we can see what specifically is being done to an extent. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Add missing bch2_moving_ctxt_flush_all()Kent Overstreet1-0/+1
This fixes a bug with rebalance IOs getting stuck with reads completed, but writes never being issued. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Re-add move_extent_write tracepointKent Overstreet2-23/+20
It appears this was accidentally deleted at some point - also, do a bit of cleanup. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amountKent Overstreet1-2/+2
Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code that uses it to be woken up for other reasons, and fixes a bug where rebalance wouldn't wake up when a scan was requested. This raises the possibility of spurious wakeups, but callers should always be able to handle that reasonably well. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Add .val_to_text() for KEY_TYPE_cookieKent Overstreet1-0/+9
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Don't pass memcmp() as a pointerKent Overstreet1-2/+8
Some (buggy!) compilers have issues with this. Fixes: https://github.com/koverstreet/bcachefs/issues/625 Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21Merge tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefsLinus Torvalds1-6/+6
Pull header fix from Kent Overstreet: "Just one small fixup for the RT build" * tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs: spinlock: Fix failing build for PREEMPT_RT
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 04:57:12 +0000