summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-10-23nilfs2: simplify life cycle management of nilfs objectRyusuke Konishi4-131/+31
This stops pre-allocating nilfs object in nilfs_get_sb routine, and stops managing its life cycle by reference counting. nilfs_find_or_create_nilfs() function, nilfs->ns_mount_mutex, nilfs_objects list, and the reference counter will be removed through the simplification. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: do not allocate multiple super block instances for a deviceRyusuke Konishi4-225/+101
This stops allocating multiple super block instances for a device. All snapshots and a current mode mount (i.e. latest tree) will be controlled with nilfs_root objects that are kept within an sb instance. nilfs_get_sb() is rewritten so that it always has a root object for the latest tree and snapshots make additional root objects. The root dentry of the latest tree is binded to sb->s_root even if it isn't attached on a directory. Root dentries of snapshots or the latest tree are binded to mnt->mnt_root on which they are mounted. With this patch, nilfs_find_sbinfo() function, nilfs->ns_supers list, and nilfs->ns_current back pointer, are deleted. In addition, init_nilfs() and load_nilfs() are simplified since they will be called once for a device, not repeatedly called for mount points. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: split out nilfs_attach_snapshotRyusuke Konishi1-28/+45
This splits the code to attach snapshots into a separate routine for convenience sake. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: split out nilfs_get_root_dentryRyusuke Konishi1-19/+35
This splits the code to allocate root dentry into a separate routine for convenience in successive changes. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: deny write access to inodes in snapshotsRyusuke Konishi3-3/+13
Snapshots of nilfs are read-only. After super block instances (sb) will be unified, nilfs will need to check write access by a way other than implicit test with IS_RDONLY(inode). This is because IS_RDONLY() refers to MS_RDONLY bit of inode->i_sb->s_flags and it will become inaccurate after the unification of sb. To prepare for the issue, this uses i_op->permission to deny write access to inodes in snapshots. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: use checkpoint tree for mount check of snapshotsRyusuke Konishi1-17/+11
This rewrites nilfs_checkpoint_is_mounted() function so that it decides whether a checkpoint is mounted by whether the corresponding root object is found in checkpoint tree. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: move inode count and block count into root objectRyusuke Konishi4-11/+10
This moves sbi->s_inodes_count and sbi->s_blocks_count into nilfs_root object. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: use root object to get ifileRyusuke Konishi7-80/+67
This rewrites functions using ifile so that they get ifile from nilfs_root object, and will remove sbi->s_ifile. Some functions that don't know the root object are extended to receive it from caller. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: make snapshots in checkpoint tree exportableRyusuke Konishi5-71/+151
The previous export operations cannot handle multiple versions of a filesystem if they belong to the same sb instance. This adds a new type of file handle and extends export operations so that they can get the inode specified by a checkpoint number as well as an inode number and a generation number. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: set pointer to root object in inodesRyusuke Konishi5-20/+68
This puts a pointer to nilfs_root object in the private part of on-memory inode, and makes nilfs_iget function pick up the inode with the same root object. Non-root inodes inherit its nilfs_root object from parent inode. That of the root inode is allocated through nilfs_attach_checkpoint() function. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: add checkpoint tree to nilfs objectRyusuke Konishi2-0/+134
To hold multiple versions of a filesystem in one sb instance, a new on-memory structure is necessary to handle one or more checkpoints. This adds a red-black tree of checkpoints to nilfs object, and adds lookup and create functions for them. Each checkpoint is represented by "nilfs_root" structure, and this structure has rb_node to configure the rb-tree. The nilfs_root object is identified with a checkpoint number. For each snapshot, a nilfs_root object is allocated and the checkpoint number of snapshot is assigned to it. For a regular mount (i.e. current mode mount), NILFS_CPTREE_CURRENT_CNO constant is assigned to the corresponding nilfs_root object. Each nilfs_root object has an ifile inode and some counters. These items will displace those of nilfs_sb_info structure in successive patches. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: remove own inode hash used for GCRyusuke Konishi7-142/+64
This uses inode hash function that vfs provides instead of the own hash table for caching gc inodes. This finally removes the own inode hash from nilfs. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: separate initializer of metadata file inodeRyusuke Konishi3-19/+35
This separates a part of initialization code of metadata file inode, and makes it available from the nilfs iget function that a later patch will add to. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: use iget5_locked to get inodeRyusuke Konishi2-3/+35
This uses iget5_locked instead of iget_locked so that gc cache can look up inodes with an inode number and an optional checkpoint number. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: keep zero value in i_cno except for gc-inodesRyusuke Konishi3-16/+24
On-memory inode structures of nilfs have a member "i_cno" which stores a checkpoint number related to the inode. For gc-inodes, this field indicates version of data each gc-inode caches for GC. Log writer temporarily uses "i_cno" to transfer the latest checkpoint number. This stops the latter use and lets only gc-inodes use it. The purpose of this patch is to allow the successive change use "i_cno" for inode lookup. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: allow nilfs_dirty_inode to mark metadata file inodes dirtyRyusuke Konishi1-0/+5
This allows sop->dirty_inode callback function (nilfs_dirty_inode) to handle metadata file inodes. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: allow nilfs_destroy_inode to destroy metadata file inodesRyusuke Konishi2-2/+6
The current nilfs_destroy_inode() doesn't handle metadata file inodes including gc inodes (dummy inodes used for garbage collection). This allows nilfs_destroy_inode() to destroy inodes of metadata files. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-23nilfs2: accept future revisionsRyusuke Konishi2-2/+3
Compatibility of nilfs partitions is now managed with three feature sets. This changes old compatibility check with revision number so that it can accept future revisions. Note that we can stop support of experimental versions of nilfs that doesn't know the feature sets by incrementing NILFS_CURRENT_REV. We don't have to do it soon, but it would be a possible option whenever the need arises. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
2010-10-22Merge branch 'urgent' of ↵Linus Torvalds3-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix ni_daq_700 compilation pcmcia: IOCARD is also required for using IRQs
2010-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-genericLinus Torvalds9-85/+86
* git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic/io.h: allow people to override individual funcs bitops: remove duplicated extern declarations bitops: make asm-generic/bitops/find.h more generic asm-generic: kdebug.h: Checkpatch cleanup asm-generic: fcntl: make exported headers use strict posix types asm-generic: cmpxchg does not handle non-long arguments asm-generic: make atomic_add_unless a function
2010-10-22Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds370-77/+601
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: vfs: make no_llseek the default vfs: don't use BKL in default_llseek llseek: automatically add .llseek fop libfs: use generic_file_llseek for simple_attr mac80211: disallow seeks in minstrel debug code lirc: make chardev nonseekable viotape: use noop_llseek raw: use explicit llseek file operations ibmasmfs: use generic_file_llseek spufs: use llseek in all file operations arm/omap: use generic_file_llseek in iommu_debug lkdtm: use generic_file_llseek in debugfs net/wireless: use generic_file_llseek in debugfs drm: use noop_llseek
2010-10-22Merge branch 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds59-711/+691
* 'vfs' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: (30 commits) BKL: remove BKL from freevxfs BKL: remove BKL from qnx4 autofs4: Only declare function when CONFIG_COMPAT is defined autofs: Only declare function when CONFIG_COMPAT is defined ncpfs: Lock socket in ncpfs while setting its callbacks fs/locks.c: prepare for BKL removal BKL: Remove BKL from ncpfs BKL: Remove BKL from OCFS2 BKL: Remove BKL from squashfs BKL: Remove BKL from jffs2 BKL: Remove BKL from ecryptfs BKL: Remove BKL from afs BKL: Remove BKL from USB gadgetfs BKL: Remove BKL from autofs4 BKL: Remove BKL from isofs BKL: Remove BKL from fat BKL: Remove BKL from ext2 filesystem BKL: Remove BKL from do_new_mount() BKL: Remove BKL from cgroup BKL: Remove BKL from NTFS ...
2010-10-22Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds100-556/+614
* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: block: autoconvert trivial BKL users to private mutex drivers: autoconvert trivial BKL users to private mutex ipmi: autoconvert trivial BKL users to private mutex mac: autoconvert trivial BKL users to private mutex mtd: autoconvert trivial BKL users to private mutex scsi: autoconvert trivial BKL users to private mutex Fix up trivial conflicts (due to addition of private mutex right next to deletion of a version string) in drivers/char/pcmcia/cm40[04]0_cs.c
2010-10-22Merge branch 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bklLinus Torvalds53-402/+347
* 'config' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl: BKL: introduce CONFIG_BKL. dabusb: remove the BKL sunrpc: remove the big kernel lock init/main.c: remove BKL notations blktrace: remove the big kernel lock rtmutex-tester: make it build without BKL dvb-core: kill the big kernel lock dvb/bt8xx: kill the big kernel lock tlclk: remove big kernel lock fix rawctl compat ioctls breakage on amd64 and itanic uml: kill big kernel lock parisc: remove big kernel lock cris: autoconvert trivial BKL users alpha: kill big kernel lock isapnp: BKL removal s390/block: kill the big kernel lock hpet: kill BKL, add compat_ioctl
2010-10-22pcmcia: fix ni_daq_700 compilationDominik Brodowski1-1/+0
Reported-by: Anca Emanuel <anca.emanuel@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-10-22Merge branch 'x86-irq-for-linus' of ↵Linus Torvalds8-40/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, 32-bit: Align percpu area and irq stacks to THREAD_SIZE x86: Move alloc_desk_mask variables inside ifdef x86-32: Align IRQ stacks properly x86: Remove CONFIG_4KSTACKS x86: Always use irq stacks Fixed up trivial conflicts in include/linux/{irq.h, percpu-defs.h}
2010-10-22Merge branch 'x86-timers-for-linus' of ↵Linus Torvalds1-30/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Hpet: Avoid the comparator readback penalty
2010-10-22bluetooth: Fix missing NULL checkAlan Cox1-0/+7
Fortunately this is only exploitable on very unusual hardware. [Reported a while ago but nothing happened so just fixing it] Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-22pcmcia: IOCARD is also required for using IRQsDominik Brodowski2-1/+5
Dave Hinds pointed out to me that 37979e1546a7 will break b43 and ray_cs, as IOCARD is not -- as the name would suggest -- only needed for cards using IO ports. Instead, as it re-deines several pins, it is also required for using interrupts. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-10-21Merge branch 'next' of ↵Linus Torvalds130-683/+3676
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits) powerpc/44x: Update ppc44x_defconfig powerpc/watchdog: Make default timeout for Book-E watchdog a Kconfig option fsl_rio: Add comments for sRIO registers. powerpc/fsl-booke: Add e55xx (64-bit) smp defconfig powerpc/fsl-booke: Add p5020 DS board support powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips powerpc/fsl-booke: Add support for FSL Arch v1.0 MMU in setup_page_sizes powerpc/fsl-booke: Add support for FSL 64-bit e5500 core powerpc/85xx: add cache-sram support powerpc/85xx: add ngPIXIS FPGA device tree node to the P1022DS board powerpc: Fix compile error with paca code on ppc64e powerpc/fsl-booke: Add p3041 DS board support oprofile/fsl emb: Don't set MSR[PMM] until after clearing the interrupt. powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chips powerpc/mpc8xxx_gpio: Add support for 'qoriq-gpio' controllers powerpc/fsl_booke: Add support to boot from core other than 0 powerpc/p1022: Add probing for individual DMA channels powerpc/fsl_soc: Search all global-utilities nodes for rstccr powerpc: Fix invalid page flags in create TLB CAM path for PTE_64BIT powerpc/mpc83xx: Support for MPC8308 P1M board ... Fix up conflict with the generic irq_work changes in arch/powerpc/kernel/time.c
2010-10-21Merge branch 'upstream-linus' of ↵Linus Torvalds31-630/+1815
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (26 commits) include/linux/libata.h: fix typo pata_bf54x: fix return type of bfin_set_devctl Drivers: ata: Makefile: replace the use of <module>-objs with <module>-y libahci: fix result_tf handling after an ATA PIO data-in command pata_sl82c105: implement sff_irq_check() method pata_sil680: implement sff_irq_check() method pata_pdc202xx_old: implement sff_irq_check() method pata_cmd640: implement sff_irq_check() method ata_piix: Add device ID for ICH4-L pata_sil680: make sil680_sff_exec_command() 'static' ata: Intel IDE-R support libata: reorder ata_queued_cmd to remove alignment padding on 64 bit builds libata: Signal that our SATL supports WRITE SAME(16) with UNMAP ata_piix: remove SIDPR locking libata: implement cross-port EH exclusion libata: add @ap to ata_wait_register() and introduce ata_msleep() ata_piix: implement LPM support libata: implement LPM support for port multipliers libata: reimplement link power management libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global ...
2010-10-21Merge branch 'upstream-linus' of ↵Linus Torvalds39-173/+1894
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (48 commits) ocfs2: Avoid to evaluate xattr block flags again. ocfs2/cluster: Release debugfs file elapsed_time_in_ms ocfs2: Add a mount option "coherency=*" to handle cluster coherency for O_DIRECT writes. Initialize max_slots early When I tried to compile I got the following warning: fs/ocfs2/slot_map.c: In function ‘ocfs2_init_slot_info’: fs/ocfs2/slot_map.c:360: warning: ‘bytes’ may be used uninitialized in this function fs/ocfs2/slot_map.c:360: note: ‘bytes’ was declared here Compiler: gcc version 4.4.3 (GCC) on Mandriva I'm not sure why this warning occurs, I think compiler don't know that variable "bytes" is initialized when it is sent by reference to ocfs2_slot_map_physical_size and it throws that ugly warning. However, a simple initialization of "bytes" variable with 0 will fix it. ocfs2: validate bg_free_bits_count after update ocfs2/cluster: Bump up dlm protocol to version 1.1 ocfs2/cluster: Show per region heartbeat elapsed time ocfs2/cluster: Add mlogs for heartbeat up/down events ocfs2/cluster: Create debugfs dir/files for each region ocfs2/cluster: Create debugfs files for live, quorum and failed region bitmaps ocfs2/cluster: Maintain bitmap of failed regions ocfs2/cluster: Maintain bitmap of quorum regions ocfs2/cluster: Track bitmap of live heartbeat regions ocfs2/cluster: Track number of global heartbeat regions ocfs2/cluster: Maintain live node bitmap per heartbeat region ocfs2/cluster: Reorganize o2hb debugfs init ocfs2/cluster: Check slots for unconfigured live nodes ocfs2/cluster: Print messages when adding/removing nodes ocfs2/cluster: Print messages when adding/removing heartbeat regions ...
2010-10-21Merge branch 'core-memblock-for-linus' of ↵Linus Torvalds69-1703/+1639
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits) x86-64: Only set max_pfn_mapped to 512 MiB if we enter via head_64.S xen: Cope with unmapped pages when initializing kernel pagetable memblock, bootmem: Round pfn properly for memory and reserved regions memblock: Annotate memblock functions with __init_memblock memblock: Allow memblock_init to be called early memblock/arm: Fix memblock_region_is_memory() typo x86, memblock: Remove __memblock_x86_find_in_range_size() memblock: Fix wraparound in find_region() x86-32, memblock: Make add_highpages honor early reserved ranges x86, memblock: Fix crashkernel allocation arm, memblock: Fix the sparsemem build memblock: Fix section mismatch warnings powerpc, memblock: Fix memblock API change fallout memblock, microblaze: Fix memblock API change fallout x86: Remove old bootmem code x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve x86: Remove not used early_res code x86, memblock: Replace e820_/_early string with memblock_ x86: Use memblock to replace early_res x86, memblock: Use memblock_debug to control debug message print out ... Fix up trivial conflicts in arch/x86/kernel/setup.c and kernel/Makefile
2010-10-21include/linux/libata.h: fix typoAndrea Gelmini1-1/+1
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21pata_bf54x: fix return type of bfin_set_devctlMike Frysinger1-1/+1
The new devctl func added for us to the driver has the wrong return type. Which is to say there shouldn't be any. This fixes compile time warnings as there shouldn't be any runtime difference. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21Drivers: ata: Makefile: replace the use of <module>-objs with <module>-yTracey Dent1-1/+1
Changed <module>-objs to <module>-y in Makefile. Signed-off-by: Tracey Dent <tdent48227@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21libahci: fix result_tf handling after an ATA PIO data-in commandTejun Heo2-3/+16
ATA devices don't send D2H Reg FIS after an successful ATA PIO data-in command. The host is supposed to take the TF and E_Status of the preceding PIO Setup FIS. Update ahci_qc_fill_rtf() such that it takes TF + E_Status from PIO Setup FIS after a successful ATA PIO data-in command. Without this patch, result_tf for such a command is filled with the content of the previous D2H Reg FIS which belongs to a previous command, which can make the command incorrectly seen as failed. * Patch updated to grab the whole TF + E_Status from PIO Setup FIS instead of just E_Status as suggested by Robert Hancock. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Mark Lord <kernel@teksavvy.com> Cc: Robert Hancock <hancockrwd@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21pata_sl82c105: implement sff_irq_check() methodSergei Shtylyov1-0/+11
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21pata_sil680: implement sff_irq_check() methodSergei Shtylyov1-0/+12
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21pata_pdc202xx_old: implement sff_irq_check() methodSergei Shtylyov1-0/+23
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21pata_cmd640: implement sff_irq_check() methodSergei Shtylyov1-0/+12
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21ata_piix: Add device ID for ICH4-LBen Hutchings1-0/+2
ICH4-L is a variant of ICH4 lacking USB2 functionality and with some different device IDs. It is documented in Intel specification update 290745-025, currently at <http://www.intel.com/assets/pdf/specupdate/290745.pdf>, and is included in the device ID table for piix. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21pata_sil680: make sil680_sff_exec_command() 'static'Sergei Shtylyov1-2/+2
... since, of course, it's not used outside this driver. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21ata: Intel IDE-R supportAlan Cox1-1/+53
Intel IDE-R devices are part of the Intel AMT management setup. They don't have any special configuration registers or settings so the ata_generic driver will support them fully. Rather than add a huge table of IDs for each chipset and keep sending in new ones this patch autodetects them. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21libata: reorder ata_queued_cmd to remove alignment padding on 64 bit buildsRichard Kennedy1-3/+3
Reorder structure ata_queued_cmd to remove 8 bytes of alignment padding on 64 bit builds & therefore reduce the size of structure ata_port by 256 bytes. Overall this will have little impact, other than reducing the amount of memory that is cleared when allocating ata_ports. Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21libata: Signal that our SATL supports WRITE SAME(16) with UNMAPMartin K. Petersen1-0/+14
Until now identifying that a device supports WRITE SAME(16) with the UNMAP bit set has been black magic. Implement support for the SBC-3 Thin Provisioning VPD page and set the TPWS bit. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21ata_piix: remove SIDPR lockingTejun Heo1-8/+0
Now that libata provides proper cross-port EH exclusion. The SIDPR locking added by commit 213373cf (ata_piix: fix locking around SIDPR access) is no longer necessary. Remove it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21libata: implement cross-port EH exclusionTejun Heo4-1/+80
In libata, the non-EH code paths should always take and release ap->lock explicitly when accessing hardware or shared data structures. However, once EH is active, it's assumed that the port is owned by EH and EH methods don't explicitly take ap->lock unless race from irq handler or other code paths are expected. However, libata EH didn't guarantee exclusion among EHs for ports of the same host. IOW, multiple EHs may execute in parallel on multiple ports of the same controller. In many cases, especially in SATA, the ports are completely independent of each other and this doesn't cause problems; however, there are cases where different ports share the same resource, which lead to obscure timing related bugs such as the one fixed by commit 213373cf (ata_piix: fix locking around SIDPR access). This patch implements exclusion among EHs of the same host. When EH begins, it acquires per-host EH ownership by calling ata_eh_acquire(). When EH finishes, the ownership is released by calling ata_eh_release(). EH ownership is also released whenever the EH thread goes to sleep from ata_msleep() or explicitly and reacquired after waking up. This ensures that while EH is actively accessing the hardware, it has exclusive access to it while allowing EHs to interleave and progress in parallel as they hit waiting stages, which dominate the time spent in EH. This achieves cross-port EH exclusion without pervasive and fragile changes while still allowing parallel EH for the most part. This was first reported by yuanding02@gmail.com more than three years ago in the following bugzilla. :-) https://bugzilla.kernel.org/show_bug.cgi?id=8223 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Reported-by: yuanding02@gmail.com Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21libata: add @ap to ata_wait_register() and introduce ata_msleep()Tejun Heo12-48/+57
Add optional @ap argument to ata_wait_register() and replace msleep() calls with ata_msleep() which take optional @ap in addition to the duration. These will be used to implement EH exclusion. This patch doesn't cause any behavior difference. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-10-21ata_piix: implement LPM supportTejun Heo1-1/+23
Now that DIPM can be used independently from HIPM, ata_piix can support LPM too. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 09:31:00 +0000