summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-08-10USB: resizing usbmon binary interface buffer causes protection faultsSteven Robertson1-1/+1
Enlarging the buffer size via the MON_IOCT_RING_SIZE ioctl causes general protection faults. It appears the culprit is an incorrect argument to mon_free_buff: instead of passing the size of the current buffer being freed, the size of the new buffer is passed. Use the correct size argument to mon_free_buff when changing the size of the buffer. Signed-off-by: Steven Robertson <steven@strobe.cc> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: functionfs: stale Makefile entry removedMichal Nazarewicz1-1/+0
Removed entry referencing g_eth_ffs.c file from Makefile. The file never existed and the line was a leftover from a developing process. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: EHCI: remove dead code in the periodic schedulerAlan Stern2-18/+0
This patch (as1409) removes some dead code from the ehci-hcd scheduler. Thanks to the previous patch in this series, stream->depth is no longer used. And stream->start and stream->rescheduled apparently have not been used for quite a while, except in some statistics-reporting code that never gets invoked. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: EHCI: reorganize isochronous scheduler routineAlan Stern1-53/+57
This patch (as1408) rearranges the scheduling code in ehci-hcd, partly to improve its structure, but mainly to change the way it works. Whether or not a transfer exceeds the hardware schedule length will now be determined by looking at the last frame the transfer would use, instead of the first available frame following the end of the transfer. The benefit of this change is that it allows the driver to accept valid URBs which would otherwise be rejected. For example, suppose the schedule length is 1024 frames, the endpoint period is 256 frames, and a four-packet URB is submitted. The four transfers would occupy slots that are 0, 256, 512, and 768 frames past the current frame (plus an extra slop factor). These don't exceed the 1024-frame limit, so the URB should be accepted. But the current code notices that the next available slot would be 1024 frames (plus slop) in the future, which is beyond the limit, and so the URB is rejected unnecessarily. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: EHCI: add missing frame -> microframe conversionAlan Stern2-10/+19
This patch (as1407) fixes a bug in ehci-hcd's isochronous scheduler. All its calculations should be done in terms of microframes, but for full-speed devices, sched->span is stored in frames. It needs to be converted. This fix is liable to expose problems in other drivers. The old code would accept URBs that should not have been accepted, so drivers have had no reason to avoid submitting URBs that exceeded the maximum schedule length. In an attempt to partially compensate for this, the patch also adjusts the schedule length from a minimum of 256 frames up to a minimum of 512 frames. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: EHCI: simplify remainder computationsAlan Stern1-14/+15
This patch (as1406) adds a micro-optimization to ehci-hcd's scheduling code. Instead of computing remainders with respect to the schedule length, use bitwise-and (which is quicker). We know that the schedule length will always be a power of two, but the compiler doesn't have this information. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: EHCI: remove PCI assumptionAlan Stern3-6/+6
This patch (as1405) fixes a small bug in ehci-hcd's isochronous scheduler. Not all EHCI controllers are PCI, and the code shouldn't assume that they are. Instead, introduce a special flag for controllers which need to delay iso scheduling for full-speed devices beyond the scheduling threshold. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: David Brownell <david-b@pacbell.net> CC: stable <stable@kernel.org> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-08-10USB: xHCI: Supporting MSI/MSI-XDong Nguyen3-41/+128
Enable MSI/MSI-X supporting in xhci driver. Provide the mechanism to fall back using MSI and Legacy IRQs if MSI-X IRQs register failed. Signed-off-by: Dong Nguyen <Dong.Nguyen@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>, Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: otg/ulpi: extend the generic ulpi driver.Igor Grinberg10-27/+166
1) Introduce ulpi specific flags for control of the ulpi phy 2) Extend the generic ulpi driver with support for Function and Interface control of upli phy 3) Update the platforms using the generic ulpi driver with new ulpi flags 4) Remove the otg control flags not in use Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: otg/ulpi: add support for SMSC USB3319 ulpi phyIgor Grinberg2-2/+1
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: otg/ulpi: remove unused macroIgor Grinberg1-2/+0
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: otg/ulpi.c : fix register writeEric Bénard1-2/+2
ulpi_set_vbus and ulpi_set_flags are using ULPI_SET(register) to write to the PHY's registers, which means we can only set bits in the PHY's register and not clear them. By directly using the address of the register without any offset, we now get the expected behaviour for these functions. Signed-off-by: Eric Bénard <eric@eukrea.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: io_ti.c: don't return 0 if writing the download record failedRoel Kluin1-1/+1
If the write download record failed we shouldn't return 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: host: Remove dead CONFIG_ARCH_KAROChristian Dietrich1-23/+1
CONFIG_ARCH_KARO doesn't exist in Kconfig and is never defined anywhere else, therefore removing all references for it from the source code. Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de> Acked-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: serial: enable async suspend for usb serial port deviceMing Lei1-0/+2
Usb serial port device is child of its usb interface device, so we can enable async suspend of usb serial port device to speedup system suspend. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: musb: forward debug mode feature to gadgetstephane duverger1-0/+3
This is a patch for the musb usb controller. It allows forwarding of the debug mode feature to its gadget in order to be able to act as an ehci debug device. This patch has been tested on an IGEPv2 board running a 2.6.35-rc1 kernel. Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com> Cc: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: EHCI Debug Port Device Gadgetstephane duverger3-0/+464
This is a patch that implements an USB EHCI Debug Device using the Gadget API. This patch applies to a 2.6.35-rc3 kernel. The gadget needs a compliant usb controller that forwards the USB_DEVICE_DEBUG_MODE feature to its gadget. The gadget provides two configuration modes, one that only printk() the received data, and one that exposes a serial device to userland (/dev/ttyGSxxx). The gadget has been tested on an IGEPv2 board running a 2.6.35-rc1 kernel. The debug port was fed on the host side by a 2.6.34 kernel. Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: Remove unnecessary casts of private_dataJoe Perches1-3/+3
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: misc: Remove unnecessary casts of private_dataJoe Perches5-18/+18
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: usb-skeleton: Remove unnecessary casts of private_dataJoe Perches1-4/+4
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: autoconvert trivial BKL users to private mutexArnd Bergmann4-25/+28
All these files use the big kernel lock in a trivial way to serialize their private file operations, typically resulting from an earlier semi-automatic pushdown from VFS. None of these drivers appears to want to lock against other code, and they all use the BKL as the top-level lock in their file operations, meaning that there is no lock-order inversion problem. Consequently, we can remove the BKL completely, replacing it with a per-file mutex in every case. Using a scripted approach means we can avoid typos. file=$1 name=$2 if grep -q lock_kernel ${file} ; then if grep -q 'include.*linux.mutex.h' ${file} ; then sed -i '/include.*<linux\/smp_lock.h>/d' ${file} else sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file} fi sed -i ${file} \ -e "/^#include.*linux.mutex.h/,$ { 1,/^\(static\|int\|long\)/ { /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex); } }" \ -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \ -e '/[ ]*cycle_kernel_lock();/d' else sed -i -e '/include.*\<smp_lock.h\>/d' ${file} \ -e '/cycle_kernel_lock()/d' fi Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10usb: storage: freecom: Fixed several coding style issues.Martin Enderleit1-12/+11
Fixed several coding style issues in freecom.c. Signed-off-by: Martin Enderleit <menderleit@gmail.com> Cc: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: musb: do not override DMA mode in channel programAnand Gadiyar1-4/+1
There is no reason for the DMA channel program to override the DMA mode passed down by its caller. Use the passed parameter directly, and let the caller handle the decision on which mode is to be used. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: musb: Kill board specific pinmux from driver fileAnand Gadiyar1-6/+0
This pin-muxing is best done in the board files. The driver should not do this explicitly. Also, this code causes a warning to be thrown when OMAP2430 and OMAP3/4 support are enabled in the same kernel. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: ehci_omap: fix device detect issue with modulesAjay Kumar Gupta1-0/+36
Currently devices don't get detected automatically if the ehci module is inserted 2nd time onward. We need to disconnect and reconnect the device for it to get detected and enumerated. Resetting the USB PHY using PHY reset comamnd over ULPI fixes this issue. Tested on OMAP3EVM. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: ulpi: fix compilation warningAjay Kumar Gupta1-0/+1
Fixes below compilation warning from ulpi.h include/linux/usb/ulpi.h:145: warning: 'struct otg_io_access_ops' declared inside parameter list include/linux/usb/ulpi.h:145: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: musb: fix compilation warning in host only modeAjay Kumar Gupta1-4/+3
Fixes below compilation warning when host only configuration is selected. drivers/usb/musb/musb_core.c: In function 'musb_stage0_irq': drivers/usb/musb/musb_core.c:711: warning: unused variable 'mbase' Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: musb: use correct register widths in register dumpsAnand Gadiyar1-16/+16
DMA_ADDR and DMA_COUNT are 32-bit registers, not 16-bit. Marking them as 16-bit in the table causes only the lower 16-bits to be dumped and this is misleading. Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: core: hcd-pci: use for_each_pci_dev()Kulikov Vasiliy1-4/+1
Use for_each_pci_dev() to simplify the code. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: serial: io_ti: Don't return 0 if writing the download record failedRoel Kluin1-1/+1
If the write download record failed we shouldn't return 0. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: storage_common: comments updatedMichal Nazarewicz1-21/+48
Updated comment to describe why printing macros are needed even thought they are copied form the composite.h. Also, made multiline comments follow the coding standard. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: compilation issue: missing TASK_INTERRUPTIBLEstephane duverger1-0/+1
Here is the patch for the following issue: drivers/usb/gadget/u_serial.c: In function ‘gs_start_tx’: drivers/usb/gadget/u_serial.c:369: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c:369: error: (Each undeclared identifier is reported only once drivers/usb/gadget/u_serial.c:369: error: for each function it appears in.) drivers/usb/gadget/u_serial.c: In function ‘gs_rx_push’: drivers/usb/gadget/u_serial.c:546: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c: In function ‘gs_close’: drivers/usb/gadget/u_serial.c:857: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c:857: error: implicit declaration of function ‘signal_pending’ drivers/usb/gadget/u_serial.c:857: error: implicit declaration of function ‘schedule_timeout’ drivers/usb/gadget/u_serial.c: In function ‘gserial_cleanup’: drivers/usb/gadget/u_serial.c:1190: error: ‘TASK_UNINTERRUPTIBLE’ undeclared (first use in this function) drivers/usb/gadget/u_serial.c:1190: error: implicit declaration of function ‘schedule’ drivers/usb/gadget/u_serial.c: In function ‘gserial_disconnect’: drivers/usb/gadget/u_serial.c:1311: error: ‘TASK_INTERRUPTIBLE’ undeclared (first use in this function) Signed-off-by: Stephane Duverger <stephane.duverger@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: EHCI: fix NULL pointer dererence in HCDs that use HCD_LOCAL_MEMAndrea Righi2-1/+7
If we use the HCD_LOCAL_MEM flag and dma_declare_coherent_memory() to enforce the host controller's local memory utilization we also need to disable native scatter-gather support, otherwise hcd_alloc_coherent() in map_urb_for_dma() is called with urb->transfer_buffer == NULL, that triggers a NULL pointer dereference. We can also consider to add a WARN_ON() and return an error code to better catch this problem in the future. At the moment no driver seems to hit this bug, so I should consider this a low-priority fix. Signed-off-by: Andrea Righi <arighi@develer.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: xhci: trivial: use ARRAY_SIZEKulikov Vasiliy1-2/+2
Change sizeof(x) / sizeof(*x) to ARRAY_SIZE(x). Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: drivers/usb/Makefile: conditionally descend to 'early'Nicolas Kaiser1-1/+1
Don't descend to the EARLY_PRINTK_DBGP directory unless it is actually used. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: usblp: fixed switch, brace, whitespace and spacing coding style issuesNicolas Kaiser1-186/+185
Fixed switch, brace, whitespace and spacing coding style issues. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Acked-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: add runtime PM for PCI-based host controllersAlan Stern1-14/+62
This patch (as1386) adds runtime-PM support for PCI-based USB host controllers. By default autosuspend is disallowed; the user must enable it by writing "auto" to the controller's power/control sysfs attribute. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: UHCI: add support for Intel's wakeup flagsAlan Stern2-14/+23
This patch (as1396) adds code to uhci-hcd to support the vendor-specific wakeup settings found in Intel's ICHx hardware. A couple of unnecessary memory barriers are removed. And the root hub isn't put back into the "suspended" state if power was lost during a system sleep -- there's not much point in doing so because the root hub will be resumed shortly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: fix race between root-hub wakeup & controller suspendAlan Stern3-1/+18
This patch (as1395) adds code to hcd_pci_suspend() for handling wakeup races. This is another general race pattern, similar to the "open vs. unregister" race we're all familiar with. Here, the race is between suspending a device and receiving a wakeup request from one of the device's suspended children. In particular, if a root-hub wakeup is requested at about the same time as the corresponding USB controller is suspended, and if the controller is enabled for wakeup, then the controller should either fail to suspend or else wake right back up again. During system sleep this won't happen very much, especially since host controllers generally aren't enabled for wakeup during sleep. However it is definitely an issue for runtime PM. Something like this will be needed to prevent the controller from autosuspending while waiting for a root-hub resume to take place. (That is, in fact, the common case, for which there is an extra test.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: controller resume should check the root hubAlan Stern4-5/+15
This patch (as1394) adds code to ehci-hcd, ohci-hcd, and uhci-hcd for automatically resuming the root hub when the controller is resumed, if the root hub has a wakeup request pending on some port. During resume from system sleep this doesn't matter, because the root hubs will naturally be resumed along with every other device in the system. However it _will_ matter for runtime PM: If the controller is suspended and a remote wakeup request is received then the controller will autoresume, but we need to ensure that the root hub also autoresumes. Otherwise the wakeup request would be ignored, the controller would go back to sleep, and the cycle would repeat a large number of times (I saw this happen before the patch was written). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: add do_wakeup parameter for PCI HCD suspendAlan Stern9-15/+17
This patch (as1385) adds a "do_wakeup" parameter to the pci_suspend method used by PCI-based host controller drivers. ehci-hcd in particular needs to know whether or not to enable wakeup when suspending a controller. Although that information is currently available through device_may_wakeup(), when support is added for runtime suspend this will no longer be true. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: move PCI HCD resume routineAlan Stern1-38/+39
This patch (as1384) moves the resume_common() routine in hcd-pci.c a little higher in the source file to avoid forward references in an upcoming patch. It also replaces the "hibernated" argument with a more general "event" argument, which will be useful when the routine is called during a runtime resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: refactor the powermac-specific ASIC clock codeAlan Stern1-21/+23
This patch (as1383) takes the powermac-specific code from the PCI HCD glue layer and encapsulates it in its own subroutine. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: g_fs: code cleanupMichal Nazarewicz2-137/+60
This commit cleans the g_fs gadget hopefully making it more readable. This is achieved by usage of the usb_string_ids_tab() function for batch string IDs registration as well as generalising configuration so that a single routine is used to add each configuration and bind interfaces. As an effect, the code is shorter and has fewer #ifdefs. Moreover, in some circumstances previous code #defined CONFIG_USB_FUNCTIONFS_GENERIC macro to prevent a situation where gadget with no configurations is built. This code removes the #define form source code and achieves the same effect using select in Kconfig. This patch also changes wording and names of the Kconfig options. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: convert usb_hcd bitfields into atomic flagsAlan Stern21-73/+80
This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: section mismatch warning fixedMichal Nazarewicz13-22/+22
In may gadgets bind and bind like functions were in a init section as they were only run during initialisation. However, being callback functions they were referenced from structures in “normal” sections. Changing the tag from “__init” to “__ref” fixes the warnings. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: f_mass_storage: added eject callbackMichal Nazarewicz2-40/+74
Added pre_eject() and post_eject() callbacks which are called before and after removable logical unit is ejected. The first can prevent logical unit from being ejected. This commit also changes the way callbacks are passed to the function from gadget. A fsg_operations structure has been created which lists all callbacks -- this is passed to the fsg_config. This is important because it changes the way thread_exits() callback is passed. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: composite: added disconnect callbackMichal Nazarewicz2-0/+4
Added a disconnect() callback to composite devices which is called by composite glue when its disconnect callback is called by gadget. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: g_multi: added documentation and INF filesMichal Nazarewicz3-5/+155
A short documentation of the g_multi driver along with INF files for Windows XP SP3 are provided. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-08-10USB: gadget: g_serial: INF file updatedMichal Nazarewicz2-77/+117
Updated the INF file for g_serial gadget. It should work with most recent Windows systems now. Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 10:44:31 +0000