summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-01-25Merge branch 'mlxsw-Offload-TBF'David S. Miller18-90/+793
Ido Schimmel says: ==================== mlxsw: Offload TBF Petr says: In order to allow configuration of shapers on Spectrum family of machines, recognize TBF either as root Qdisc, or as a child of ETS or PRIO. Configure rate of maximum shaper according to TBF rate setting, and maximum shaper burst size according to TBF burst setting. - Patches #1 and #2 make the TBF shaper suitable for offloading. - Patches #3, #4 and #5 are refactoring aimed at easier support of leaf Qdiscs in general. - Patches #6 to #10 gradually introduce TBF offload. - Patches #11 to #14 add selftests. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: mlxsw: Add a TBF selftestPetr Machata8-0/+344
Add a test that runs traffic across a port throttled with TBF. The test checks that the observed throughput is within +-5% from the installed shaper. To allow checking both the software datapath and the offloaded one, make the test suitable for inclusion from driver-specific wrapper. Introduce such wrappers for mlxsw. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: forwarding: lib: Allow reading TC rule byte countersPetr Machata1-1/+2
The function tc_rule_stats_get() fetches a packet counter of a given TC rule. Extend it to support byte counters as well by adding an optional argument with selector. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: forwarding: lib: Add helpers for busywaitingPetr Machata1-0/+18
The function busywait() is handy as a safety-latched variant of a while loop. Many selftests deal specifically with counter values, and busywaiting on them is likely to be rather common (it is not quite common now, but busywait() has not been around for very long). To facilitate expressing simply what is tested, introduce two helpers: - until_counter_is(), which can be used as a predicate passed to busywait(), which holds when expression, which is itself passed as an argument to until_counter_is(), reaches a desired value. - busywait_for_counter(), which is useful for waiting until a given counter changes "by" (as opposed to "to") a certain amount. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25selftests: Move two functions from mlxsw's qos_lib to libPetr Machata2-24/+24
The function humanize() is used for converting value in bits/s to a human-friendly approximate value in Kbps, Mbps or Gbps. There is nothing hardware-specific in that, so move the function to lib.sh. Similarly for the rate() function, which just does a bit of math to calculate a rate, given two counter values and a time interval. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum_qdisc: Support offloading of TBF QdiscPetr Machata3-0/+203
React to the TC messages that were introduced in a preceding patch and configure egress maximum shaper as appropriate. TBF can be used as a root qdisc or under one of PRIO or strict ETS bands. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum: Configure shaper rate and burst size togetherPetr Machata3-8/+10
In order to allow configuration of burst size together with shaper rate, extend mlxsw_sp_port_ets_maxrate_set() with a burst_size argument. Convert call sites to pass 0 (for default). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum: Add lowest_shaper_bs to struct mlxsw_spPetr Machata2-0/+4
Lower limit of burst size configuration is dependent on system type. Add a datum to track the value. Initialize as appropriate in mlxsw_spX_init(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: reg: Increase MLXSW_REG_QEEC_MAS_DISPetr Machata1-2/+2
As the port speeds grow, the current value of "unlimited shaper", 200000000Kbps, might become lower than the actually supported speeds. Bump it to the maximum value that fits in the corresponding QEEC field, which is about 2.1Tbps. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: reg: Add max_shaper_bs to QoS ETS Element ConfigurationPetr Machata1-0/+15
The QEEC register configures scheduling elements. One of the bits of configuration is the burst size to use for the shaper installed on the element. Add the necessary fields to support this configuration. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum_qdisc: Extract a common leaf unoffload functionPetr Machata1-5/+14
When the RED Qdisc is unoffloaded, it needs to reduce the reported backlog by the amount that is in the HW, so that only the SW backlog is contained in the counter. The same thing will need to be done by TBF, and likely any other leaf Qdisc as well. Extract a helper mlxsw_sp_qdisc_leaf_unoffload() and call it from mlxsw_sp_qdisc_red_unoffload(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum_qdisc: Add mlxsw_sp_qdisc_get_class_stats()Petr Machata1-10/+19
Add a wrapper around mlxsw_sp_qdisc_collect_tc_stats() and mlxsw_sp_qdisc_update_stats() for the simple case of doing both in one go: mlxsw_sp_qdisc_get_class_stats(). Dispatch to that function from mlxsw_sp_qdisc_get_red_stats(). This new function will be useful for other leaf Qdiscs as well. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum_qdisc: Extract a per-TC stat functionPetr Machata1-49/+70
Extract from mlxsw_sp_qdisc_get_prio_stats() two new functions: mlxsw_sp_qdisc_collect_tc_stats() to accumulate stats for that one TC only, and mlxsw_sp_qdisc_update_stats() that makes the stats relative to base values stored earlier. Use them from mlxsw_sp_qdisc_get_red_stats(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25net: sched: Make TBF Qdisc offloadablePetr Machata3-0/+78
Invoke ndo_setup_tc as appropriate to signal init / replacement, destroying and dumping of TBF Qdisc. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25net: sched: sch_tbf: Don't overwrite backlog before dumpingPetr Machata1-1/+0
In 2011, in commit b0460e4484f9 ("sch_tbf: report backlog information"), TBF started copying backlog depth from the child Qdisc before dumping, with the motivation that the backlog was otherwise not visible in "tc -s qdisc show". Later, in 2016, in commit 8d5958f424b6 ("sch_tbf: update backlog as well"), TBF got a full-blown backlog tracking. However it kept copying the child's backlog over before dumping. That line is now unnecessary, so remove it. As shown in the following example, backlog is still reported correctly: # tc -s qdisc show dev veth0 invisible qdisc tbf 1: root refcnt 2 rate 1Mbit burst 128Kb lat 82.8s Sent 505475370 bytes 406985 pkt (dropped 0, overlimits 812544 requeues 0) backlog 81972b 66p requeues 0 qdisc bfifo 0: parent 1:1 limit 10Mb Sent 505475370 bytes 406985 pkt (dropped 0, overlimits 0 requeues 0) backlog 81972b 66p requeues 0 Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25Merge branch 'hv_netvsc-Add-XDP-support'David S. Miller7-39/+430
Haiyang Zhang says: ==================== hv_netvsc: Add XDP support Add XDP support and update related document. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25hv_netvsc: Update document for XDP supportHaiyang Zhang1-0/+21
Added the new section in the document regarding XDP support by hv_netvsc driver. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25hv_netvsc: Add XDP supportHaiyang Zhang6-39/+409
This patch adds support of XDP in native mode for hv_netvsc driver, and transparently sets the XDP program on the associated VF NIC as well. Setting / unsetting XDP program on synthetic NIC (netvsc) propagates to VF NIC automatically. Setting / unsetting XDP program on VF NIC directly is not recommended, also not propagated to synthetic NIC, and may be overwritten by setting of synthetic NIC. The Azure/Hyper-V synthetic NIC receive buffer doesn't provide headroom for XDP. We thought about re-use the RNDIS header space, but it's too small. So we decided to copy the packets to a page buffer for XDP. And, most of our VMs on Azure have Accelerated Network (SRIOV) enabled, so most of the packets run on VF NIC. The synthetic NIC is considered as a fallback data-path. So the data copy on netvsc won't impact performance significantly. XDP program cannot run with LRO (RSC) enabled, so you need to disable LRO before running XDP: ethtool -K eth0 lro off XDP actions not yet supported: XDP_REDIRECT Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25devlink: Add health recover notifications on devlink flowsMoshe Shemesh1-87/+89
Devlink health recover notifications were added only on driver direct updates of health_state through devlink_health_reporter_state_update(). Add notifications on updates of health_state by devlink flows of report and recover. Moved functions devlink_nl_health_reporter_fill() and devlink_recover_notify() to avoid forward declaration. Fixes: 97ff3bd37fac ("devlink: add devink notification when reporter update health state") Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25net: fddi: skfp: Use print_hex_dump() helperAndy Shevchenko1-15/+1
Use the print_hex_dump() helper, instead of open-coding the same operations. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25net: atm: use %*ph to print small bufferAndy Shevchenko2-70/+28
Use %*ph format to print small buffer as hex string. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mptcp: Fix code formattingMat Martineau2-3/+3
checkpatch.pl had a few complaints in the last set of MPTCP patches: ERROR: code indent should use tabs where possible +^I subflow, sk->sk_family, icsk->icsk_af_ops, target, mapped);$ CHECK: Comparison to NULL could be written "!new_ctx" + if (new_ctx == NULL) { ERROR: "foo * bar" should be "foo *bar" +static const struct proto_ops * tcp_proto_ops(struct sock *sk) Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mptcp: do not inherit inet proto opsFlorian Westphal2-19/+54
We need to initialise the struct ourselves, else we expose tcp-specific callbacks such as tcp_splice_read which will then trigger splat because the socket is an mptcp one: BUG: KASAN: slab-out-of-bounds in tcp_mstamp_refresh+0x80/0xa0 net/ipv4/tcp_output.c:57 Write of size 8 at addr ffff888116aa21d0 by task syz-executor.0/5478 CPU: 1 PID: 5478 Comm: syz-executor.0 Not tainted 5.5.0-rc6 #3 Call Trace: tcp_mstamp_refresh+0x80/0xa0 net/ipv4/tcp_output.c:57 tcp_rcv_space_adjust+0x72/0x7f0 net/ipv4/tcp_input.c:612 tcp_read_sock+0x622/0x990 net/ipv4/tcp.c:1674 tcp_splice_read+0x20b/0xb40 net/ipv4/tcp.c:791 do_splice+0x1259/0x1560 fs/splice.c:1205 To prevent build error with ipv6, add the recv/sendmsg function declaration to ipv6.h. The functions are already accessible "thanks" to retpoline related work, but they are currently only made visible by socket.c specific INDIRECT_CALLABLE macros. Reported-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24Merge branch 'mptcp-part-two'David S. Miller25-2/+5118
Christoph Paasch says: ==================== Multipath TCP part 2: Single subflow & RFC8684 support v2 -> v3: Added RFC8684-style handshake (see below fore more details) and some minor fixes v1 -> v2: Rebased on latest "Multipath TCP: Prerequisites" v3 series This set adds MPTCP connection establishment, writing & reading MPTCP options on data packets, a sysctl to allow MPTCP per-namespace, and self tests. This is sufficient to establish and maintain a connection with a MPTCP peer, but will not yet allow or initiate establishment of additional MPTCP subflows. We also add the necessary code for the RFC8684-style handshake. RFC8684 obsoletes the experimental RFC6824 and makes MPTCP move-on to version 1. Originally our plan was to submit single-subflow and RFC8684 support in two patchsets, but to simplify the merging-process and ensure that a coherent MPTCP-version lands in Linux we decided to merge the two sets into a single one. The MPTCP patchset exclusively supports RFC 8684. Although all MPTCP deployments are currently based on RFC 6824, future deployments will be migrating to MPTCP version 1. 3GPP's 5G standardization also solely supports RFC 8684. In addition, we believe that this initial submission of MPTCP will be cleaner by solely supporting RFC 8684. If later on support for the old MPTCP-version is required it can always be added in the future. The major difference between RFC 8684 and RFC 6824 is that it has a better support for servers using TCP SYN-cookies by reliably retransmitting the MP_CAPABLE option. Before ending this cover letter with some refs, it is worth mentioning that we promise David Miller that merging this series will be rewarded by Twitter dopamine hits :-D Clone/fetch: https://github.com/multipath-tcp/mptcp_net-next.git (tag: netdev-v3-part2) Browse: https://github.com/multipath-tcp/mptcp_net-next/tree/netdev-v3-part2 Thank you for your review. You can find us at mptcp@lists.01.org and https://is.gd/mptcp_upstream ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: cope with later TCP fallbackPaolo Abeni2-17/+103
With MPTCP v1, passive connections can fallback to TCP after the subflow becomes established: syn + MP_CAPABLE -> <- syn, ack + MP_CAPABLE ack, seq = 3 -> // OoO packet is accepted because in-sequence // passive socket is created, is in ESTABLISHED // status and tentatively as MP_CAPABLE ack, seq = 2 -> // no MP_CAPABLE opt, subflow should fallback to TCP We can't use the 'subflow' socket fallback, as we don't have it available for passive connection. Instead, when the fallback is detected, replace the mptcp socket with the underlying TCP subflow. Beyond covering the above scenario, it makes a TCP fallback socket as efficient as plain TCP ones. Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: process MP_CAPABLE data optionChristoph Paasch4-27/+95
This patch implements the handling of MP_CAPABLE + data option, as per RFC 6824 bis / RFC 8684: MPTCP v1. On the server side we can receive the remote key after that the connection is established. We need to explicitly track the 'missing remote key' status and avoid emitting a mptcp ack until we get such info. When a late/retransmitted/OoO pkt carrying MP_CAPABLE[+data] option is received, we have to propagate the mptcp seq number info to the msk socket. To avoid ABBA locking issue, explicitly check for that in recvmsg(), where we own msk and subflow sock locks. The above also means that an established mp_capable subflow - still waiting for the remote key - can be 'downgraded' to plain TCP. Such change could potentially block a reader waiting for new data forever - as they hook to msk, while later wake-up after the downgrade will be on subflow only. The above issue is not handled here, we likely have to get rid of msk->fallback to handle that cleanly. Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: parse and emit MP_CAPABLE option according to v1 specChristoph Paasch7-46/+160
This implements MP_CAPABLE options parsing and writing according to RFC 6824 bis / RFC 8684: MPTCP v1. Local key is sent on syn/ack, and both keys are sent on 3rd ack. MP_CAPABLE messages len are updated accordingly. We need the skbuff to correctly emit the above, so we push the skbuff struct as an argument all the way from tcp code to the relevant mptcp callbacks. When processing incoming MP_CAPABLE + data, build a full blown DSS-like map info, to simplify later processing. On child socket creation, we need to record the remote key, if available. Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: move from sha1 (v0) to sha256 (v1)Paolo Abeni4-59/+104
For simplicity's sake use directly sha256 primitives (and pull them as a required build dep). Add optional, boot-time self-tests for the hmac function. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: add basic kselftest for mptcpFlorian Westphal8-0/+1449
Add mptcp_connect tool: xmit two files back and forth between two processes, several net namespaces including some adding delays, losses and reordering. Wrapper script tests that data was transmitted without corruption. The "-c" command line option for mptcp_connect.sh is there for debugging: The script will use tcpdump to create one .pcap file per test case, named according to the namespaces, protocols, and connect address in use. For example, the first test case writes the capture to ns1-ns1-MPTCP-MPTCP-10.0.1.1.pcap. The stderr output from tcpdump is printed after the test completes to show tcpdump's "packets dropped by kernel" information. Also check that userspace can't create MPTCP sockets when mptcp.enabled sysctl is off. The "-b" option allows to tune/lower send buffer size. "-m mmap" can be used to test blocking io. Default is non-blocking io using read/write/poll. Will run automatically on "make kselftest". Note that the default timeout of 45 seconds is used even if there is a "settings" changing it to 450. 45 seconds should be enough in most cases but this depends on the machine running the tests. A fix to correctly read the "settings" file has been proposed upstream but not applied yet. It is not blocking the execution of these new tests but it would be nice to have it: https://patchwork.kernel.org/patch/11204935/ Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: new sysctl to control the activation per NSMatthieu Baerts4-5/+146
New MPTCP sockets will return -ENOPROTOOPT if MPTCP support is disabled for the current net namespace. We are providing here a way to control access to the feature for those that need to turn it on or off. The value of this new sysctl can be different per namespace. We can then restrict the usage of MPTCP to the selected NS. In case of serious issues with MPTCP, administrators can now easily turn MPTCP off. Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: allow collapsing consecutive sendpages on the same substreamPaolo Abeni1-15/+60
If the current sendmsg() lands on the same subflow we used last, we can try to collapse the data. Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: recvmsg() can drain data from multiple subflowsPaolo Abeni1-10/+168
With the previous patch in place, the msk can detect which subflow has the current map with a simple walk, let's update the main loop to always select the 'current' subflow. The exit conditions now closely mirror tcp_recvmsg() to get expected timeout and signal behavior. Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: add subflow write space signalling and mptcp_pollFlorian Westphal3-0/+57
Add new SEND_SPACE flag to indicate that a subflow has enough space to accept more data for transmission. It gets cleared at the end of mptcp_sendmsg() in case ssk has run below the free watermark. It is (re-set) from the wspace callback. This allows us to use msk->flags to determine the poll mask. Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Implement MPTCP receive pathMat Martineau7-5/+609
Parses incoming DSS options and populates outgoing MPTCP ACK fields. MPTCP fields are parsed from the TCP option header and placed in an skb extension, allowing the upper MPTCP layer to access MPTCP options after the skb has gone through the TCP stack. The subflow implements its own data_ready() ops, which ensures that the pending data is in sequence - according to MPTCP seq number - dropping out-of-seq skbs. The DATA_READY bit flag is set if this is the case. This allows the MPTCP socket layer to determine if more data is available without having to consult the individual subflows. It additionally validates the current mapping and propagates EoF events to the connection socket. Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Write MPTCP DSS headers to outgoing data packetsMat Martineau4-6/+286
Per-packet metadata required to write the MPTCP DSS option is written to the skb_ext area. One write to the socket may contain more than one packet of data, which is copied to page fragments and mapped in to MPTCP DSS segments with size determined by the available page fragments and the maximum mapping length allowed by the MPTCP specification. If do_tcp_sendpages() splits a DSS segment in to multiple skbs, that's ok - the later skbs can either have duplicated DSS mapping information or none at all, and the receiver can handle that. The current implementation uses the subflow frag cache and tcp sendpages to avoid excessive code duplication. More work is required to ensure that it works correctly under memory pressure and to support MPTCP-level retransmissions. The MPTCP DSS checksum is not yet implemented. Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Add setsockopt()/getsockopt() socket operationsPeter Krystad1-0/+58
set/getsockopt behaviour with multiple subflows is undefined. Therefore, for now, we return -EOPNOTSUPP unless we're in fallback mode. Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Add shutdown() socket operationPeter Krystad1-0/+66
Call shutdown on all subflows in use on the given socket, or on the fallback socket. Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Add key generation and token treePeter Krystad6-8/+428
Generate the local keys, IDSN, and token when creating a new socket. Introduce the token tree to track all tokens in use using a radix tree with the MPTCP token itself as the index. Override the rebuild_header callback in inet_connection_sock_af_ops for creating the local key on a new outgoing connection. Override the init_req callback of tcp_request_sock_ops for creating the local key on a new incoming connection. Will be used to obtain the MPTCP parent socket to handle incoming joins. Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Create SUBFLOW socket for incoming connectionsPeter Krystad1-5/+231
Add subflow_request_sock type that extends tcp_request_sock and add an is_mptcp flag to tcp_request_sock distinguish them. Override the listen() and accept() methods of the MPTCP socket proto_ops so they may act on the subflow socket. Override the conn_request() and syn_recv_sock() handlers in the inet_connection_sock to handle incoming MPTCP SYNs and the ACK to the response SYN. Add handling in tcp_output.c to add MP_CAPABLE to an outgoing SYN-ACK response for a subflow_request_sock. Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Handle MP_CAPABLE options for outgoing connectionsPeter Krystad9-24/+663
Add hooks to tcp_output.c to add MP_CAPABLE to an outgoing SYN request, to capture the MP_CAPABLE in the received SYN-ACK, to add MP_CAPABLE to the final ACK of the three-way handshake. Use the .sk_rx_dst_set() handler in the subflow proto to capture when the responding SYN-ACK is received and notify the MPTCP connection layer. Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Associate MPTCP context with TCP socketPeter Krystad5-7/+275
Use ULP to associate a subflow_context structure with each TCP subflow socket. Creating these sockets requires new bind and connect functions to make sure ULP is set up immediately when the subflow sockets are created. Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Handle MPTCP TCP optionsPeter Krystad7-1/+181
Add hooks to parse and format the MP_CAPABLE option. This option is handled according to MPTCP version 0 (RFC6824). MPTCP version 1 MP_CAPABLE (RFC6824bis/RFC8684) will be added later in coordination with related code changes. Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24mptcp: Add MPTCP socket stubsMat Martineau10-0/+212
Implements the infrastructure for MPTCP sockets. MPTCP sockets open one in-kernel TCP socket per subflow. These subflow sockets are only managed by the MPTCP socket that owns them and are not visible from userspace. This commit allows a userspace program to open an MPTCP socket with: sock = socket(AF_INET, SOCK_STREAM, IPPROTO_MPTCP); The resulting socket is simply a wrapper around a single regular TCP socket, without any of the MPTCP protocol implemented over the wire. Co-developed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Florian Westphal <fw@strlen.de> Co-developed-by: Peter Krystad <peter.krystad@linux.intel.com> Signed-off-by: Peter Krystad <peter.krystad@linux.intel.com> Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Co-developed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24Merge branch 'net-bridge-add-per-vlan-state-option'David S. Miller8-32/+311
Nikolay Aleksandrov says: ==================== net: bridge: add per-vlan state option This set adds the first per-vlan option - state, which uses the new vlan infrastructure that was recently added. It gives us forwarding control on per-vlan basis. The first 3 patches prepare the vlan code to support option dumping and modification. We still compress vlan ranges which have equal options, each new option will have to add its own equality check to br_vlan_opts_eq(). The vlans are created in forwarding state by default to be backwards compatible and vlan state is considered only when the port state is forwarding (more info in patch 4). I'll send the selftest for the vlan state with the iproute2 patch-set. v2: patch 3: do full (all-vlan) notification only on vlan create/delete, otherwise use the per-vlan notifications only, rework how option change ranges are detected, add more verbose error messages when setting options and add checks if a vlan should be used. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: vlan: add per-vlan stateNikolay Aleksandrov6-19/+134
The first per-vlan option added is state, it is needed for EVPN and for per-vlan STP. The state allows to control the forwarding on per-vlan basis. The vlan state is considered only if the port state is forwarding in order to avoid conflicts and be consistent. br_allowed_egress is called only when the state is forwarding, but the ingress case is a bit more complicated due to the fact that we may have the transition between port:BR_STATE_FORWARDING -> vlan:BR_STATE_LEARNING which should still allow the bridge to learn from the packet after vlan filtering and it will be dropped after that. Also to optimize the pvid state check we keep a copy in the vlan group to avoid one lookup. The state members are modified with *_ONCE() to annotate the lockless access. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: vlan: add basic option setting supportNikolay Aleksandrov4-7/+130
This patch adds support for option modification of single vlans and ranges. It allows to only modify options, i.e. skip create/delete by using the BRIDGE_VLAN_INFO_ONLY_OPTS flag. When working with a range option changes we try to pack the notifications as much as possible. v2: do full port (all vlans) notification only when creating/deleting vlans for compatibility, rework the range detection when changing options, add more verbose extack errors and check if a vlan should be used (br_vlan_should_use checks) Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: vlan: add basic option dumping supportNikolay Aleksandrov4-7/+48
We'll be dumping the options for the whole range if they're equal. The first range vlan will be used to extract the options. The commit doesn't change anything yet it just adds the skeleton for the support. The dump will happen when the first option is added. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24net: bridge: check port state before br_allowed_egressNikolay Aleksandrov1-1/+1
If we make sure that br_allowed_egress is called only when we have BR_STATE_FORWARDING state then we can avoid a test later when we add per-vlan state. Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23Merge tag 'mlx5-updates-2020-01-22' of ↵David S. Miller12-398/+805
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5-updates-2020-01-22 This series provides updates to mlx5 driver. 1) Misc small cleanups 2) Some SW steering updates including header copy support 3) Full ethtool statistics support for E-Switch uplink representor Some refactoring was required to share the bare-metal NIC ethtool stats with the Uplink representor. On Top of this Vlad converts the ethtool stats support in E-Swtich vports representors to use the mlx5e "stats groups" infrastructure and then applied all applicable stats to the uplink representor netdev. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-23Merge branch 'Add-PHY-IDs-for-DP83825-6'David S. Miller2-4/+19
Dan Murphy says: ==================== Add PHY IDs for DP83825/6 Adding new PHY IDs for the DP83825 and DP83826 TI Ethernet PHYs to the DP83822 PHY driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 20:24:50 +0000