summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2007-05-08[POWERPC] Holly bootwrapperJosh Boyer2-1/+46
Add Holly/Hickory bootwrapper Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] Holly DTSJosh Boyer1-0/+198
Add Holly DTS file Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] Holly defconfigJosh Boyer1-0/+1070
Holly/Hickory defconfig Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] Add support for 750CL Holly boardJosh Boyer4-4/+330
Add PowerPC 750 Holly/Hickory platform support Signed-off-by: Stephen Winiecki <stevewin@us.ibm.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] Generalize tsi108 PCI setupJosh Boyer4-8/+10
Generalize tsi108_setup_pci to take the config space physical address and primary bus designator as a parameter. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] Generalize tsi108 PHY typesJosh Boyer4-16/+23
Add a phy_type field to the tsi108 ethernet structures to indicate which PHY is used on a board. This is derived from the "compatible" property in the ethernet-phy node of the device tree. The default remains the MV88E PHY. Also, convert the setup code to use of_get_mac_address instead of hard coding a lookup for the "address" property in the ethernet node. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] Add tsi108_pci.h for common PCI functionsJosh Boyer3-4/+47
Add a header file for the common PCI routines used for the TSI bridge Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] Export pcibios_remove_pci_devicesLinas Vepstas1-0/+1
The pseries PCI hotplug code cannot build as a module, unless the pcibios_remove_pci_devices function is exported. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> ---- arch/powerpc/platforms/pseries/pci_dlpar.c | 1 + 1 file changed, 1 insertion(+) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] via-pmu: remove LED sleep notifierJohannes Berg3-33/+12
The generic LED code now makes sure that suspended devices don't blink, so we no longer need to do it ourselves. For the suspend to disk case, however, we need to make sure that we don't blink if the PMU sysdev was suspended before the LED device. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] Add __init annotations to reserve_mem() and stabs_alloc()Michael Ellerman2-2/+2
reserve_mem() and stabs_alloc() are both called only from other __init routines, so can be marked __init. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-08[POWERPC] Cope with PCI host bridge I/O window not starting at 0Paul Mackerras1-4/+5
Currently our code to set up the data structures for a PCI host bridge and create the mapping for its I/O window assumes that the window starts at I/O port 0 on the PCI side. If this is not true, we can end up with I/O port numbers in the resources for PCI devices which will cause an oops if a driver tries to access them via inb/outb etc., because there is no mapping for the corresponding addresses. Normally the I/O window starts at 0, but there are some situations on partitioned machines with a hypervisor where the window may not start at 0. This fixes the problem by allocating space for the range from 0 to the end of the I/O window. That is, hose->io_base_virt contains the virtual address for I/O port 0 on the PCI bus, and thus the assumption that hose->io_base_virt - pci_io_base is the offset between the "global" I/O port numbers (those in the PCI device resources) and the I/O port numbers on the PCI bus is maintained. For PCI host bridges that are present at boot, we only map the portion of that range that correspond to the bridge's I/O window. For bridges added after boot we ioremap the range from 0 to the end of the I/O window, for now; in fact hot-added bridges should be using reserve_phb_iospace() and __ioremap_explicit (so they get sensible global port numbers), but we don't have the infrastructure yet to do that (basically a free_phb_iospace() routine plus appropriate locking). Interestingly, this makes the two arms of the if statement in get_bus_io_range do almost exactly the same thing; that function could now be simplified in a further patch. Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Fix build problem in ppc4xx_sgdma.cDavid Gibson1-1/+1
ppc4xx_sgdma.c is #including asm/dma-mapping.h directly, which should only ever be included via linux/dma-mapping.h. asm/dma-mapping.h relies on an enum defined in linux/dma-mapping.h before its own include. This fixes the problem. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] mpc52xx suspend to deep-sleepDomen Puncer6-0/+401
Implement deep-sleep on MPC52xx. SDRAM is put into self-refresh with help of SRAM code (alternatives would be code in FLASH, I-cache). Interrupt code must also not be in SDRAM, so put it in I-cache. MPC52xx core is static, so contents will remain intact even with clocks turned off. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Don't shutdown TX on mpc5200 serial port if it is a consoleGrant Likely1-2/+3
If the serial port gets shut down, then console output stalls. 9 out of 10 kernel hackers agree, this is a bad thing. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Set efika's device_type to "soc"Domen Puncer1-1/+1
Device type should be "soc" (as in lite5200.dts), compatible is already set to "mpc5200". Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] lite5200(b) support for i2cDomen Puncer3-4/+9
Add fsl-i2c to mpc5200 i2c node in device tree, and enable FSL_SOC. Tested to work with built-in eeprom on lite5200b. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] lite5200(b) DTS fixesDomen Puncer2-4/+6
Three trivial DTS fixes: -Mark Lite5200(b) boards as "mpc5200" compatible. On efika the firmware already does that. -Fix mscan interrupt. -Fix wakeup GPIO address. Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] macintosh: Use common modalias generation for macio_sysfsSylvain Munaut1-20/+7
There is now a common function to generate the modalias string, so use it. We just need to add the \n at the end. Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Export of_device_get_modaliasSylvain Munaut2-2/+5
Apparently other parts of the kernel need to know the modalias internally (like the sysfs code in macintosh driver). To avoid consistency issues, we export this code and use it everywhere it's needed rather than repeat it ... Signed-off-by: Sylvain Munaut <tnt@246tNt.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Fix some missing build dependencies in arch/powerpc/bootDavid Gibson1-4/+5
This patch fixes a couple of missing dependencies in arch/powerpc/boot/Makefile. First, it ensures that the zlib.h header is linked in before attempting to build gunzip_util.o, as it is, building gunzip_util.o usually works, but not always depending on make order. Second, it makes the final images which are built using a dts dependent on that dts, so the image will be correctly rebuilt if the dts changes. This in turn requires fixing the definition of the dts variable. CONFIG_DEVICE_TREE from Kconfig will have quotes around it, which don't matter when passing the variable to a shell, but which need to be removed when incorporating it into a filename for make's use. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Kill off the PTE_FMT macroDavid Gibson2-3/+2
32-bit powerpc uses a PTE_FMT macro to handle printk() formatting of PTE entries (which can vary in type and size). Apparently there was a good reason for it once, but with current compilers it's simpler just to workaround the variation with a cast in the printk() itself (there's only one use). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] pasemi: Update ppc_proc_freq from cpufreq driverOlof Johansson1-0/+4
Update the global cpu speed variable according to current cpufreq speed, /proc/cpuinfo reports the actual speed. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] powermac: Suspend to disk on G5Johannes Berg9-6/+276
Powermac G5 suspend to disk implementation. The code is platform agnostic but only tested on powermac, no other 64-bit powerpc machines. Because nvidiafb still breaks suspend I have marked it EXPERIMENTAL on powermac and because I can't test it and some lowlevel code will need changes it is BROKEN on all other 64-bit platforms. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] DART iommu suspendJohannes Berg3-0/+65
This implements save and restore hooks for IOMMUs and implements it the DART iommu. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Rename device_is_compatible to of_device_is_compatibleStephen Rothwell47-123/+123
for consistency with other Open Firmware interfaces (and Sparc). This is just a straight replacement. This leaves the compatibility define in place. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] powermac: Support G5 CPU hotplugJohannes Berg4-4/+82
This allows "hotplugging" of CPUs on G5 machines. CPUs that are disabled are put into an idle loop with the decrementer frequency set to minimum. To wake them up again we kick them just like when bringing them up. To stop those CPUs from messing with any global state we stop them from entering the timer interrupt. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] bootwrapper: Only build cuImage if CONFIG_DEVICE_TREE is non-emptyScott Wood1-1/+4
This allows the zImage target to once again be used to build all supported image types, rather than requiring an explicit "make uImage" to avoid failing to create an unneeded cuImage. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Add smp_call_function_map and smp_call_function_singlewill schmidt1-21/+52
Add a new function named smp_call_function_single(). This matches a generic prototype from include/linux/smp.h. Add a function smp_call_function_map(). This is, for the most part, a rename of smp_call_function, with some added cpumask support. smp_call_function and smp_call_function_single call into smp_call_function_map. Lightly tested on 970mp (blade), power4 and power5. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> cc: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] Change topology_init() to a subsys_initcallKevin Corry1-1/+1
Change the powerpc version of topology_init() from an __initcall to a subsys_initcall to match all other architectures. Signed-off-by: Kevin Corry <kevcorry@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] MPIC sys_device & suspend/resumeJohannes Berg2-1/+110
This adds mpic to the system devices and implements suspend and resume for them. This is necessary to get interrupts for modules back to where they were before a suspend to disk. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07[POWERPC] 64K page support for kexecLuke Browning1-22/+62
This fixes a couple of kexec problems related to 64K page support in the kernel. kexec issues a tlbie for each pte. The parameters for the tlbie are the page size and the virtual address. Support was missing for the computation of these two parameters for 64K pages. This adds that support. Signed-off-by: Luke Browning <lukebrowning@us.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Minor fault path optimizationChristoph Hellwig4-39/+31
Call the kprobes pagefault handler directly instead of going through the complex notifier chain. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Transparently handle <.symbol> lookup for kprobesSrinivasa Ds1-0/+6
When data symbols are not present in kernel image, user needs to add dot(".") before function name explicitly, that he wants to probe in kprobe module on ppc64. for ex:- When data symbols are missing on ppc64, ==================== [root@llm27lp1 ~]# cat /proc/kallsyms | grep do_fork c00000000006283c T .do_fork ============================== User needs add "." to "do_fork" kp.symbol_name = ".do_fork"; ============================ This makes kprobe modules unportable. This fixes the problem. Signed-off-by: Srinivasa Ds <srinivasa@in.ibm.com> Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Remove duplicate export of __div64_32.Scott Wood1-1/+0
Change 3927f2e8f9afa3424bb51ca81f7abac01ffd0005 moved lib/lib64.c from lib-y to obj-y, preventing the export in ppc_ksyms.c from overriding the one in lib, and thus causing a duplicate-export warning. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] pasemi: Only call of_platform_bus_probe() on relevant platformsOlof Johansson1-1/+4
Only publish of_platform devices if running on a machine that has them. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Rename get_property to of_get_property: driversStephen Rothwell33-85/+87
These are all the remaining instances of get_property. Simple rename of get_property to of_get_property. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] get_property returns constStephen Rothwell1-7/+6
This is the last place that needs changing since get_property was changed to return "const void *". Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Small cleanups to the cuboot bootwrapper codeDavid Gibson3-25/+20
This patch makes a few small cleanups to the cuboot code. - It removes the double layered selection of images, via cuboot-plat-y, instead having the cuboot platforms directly select a suitable image-y (this changes the name of the final cuboot image from plain cuImage to cuImage.<platform>). - Factors out some code in the wrapper that's potentially useful to platforms other than uboot. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] PS3: Defconfig updatesGeoff Levand1-74/+255
Updates to ps3_defconfig for linux-2.6.21. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] PS3: Fix system slowdownTakao Shinohara1-0/+11
The PS3 HV will deliver soft-disabled interrupts at the next HV call or interrupt. Add an HV call to local_irq_restore() to force the timely delivery of any pending interrupts. This fixes the system slowdown bug reported here http://bugzilla.kernel.org/show_bug.cgi?id=8260 Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] PS3: Interrupt routine fixups.Geoff Levand8-106/+211
Fixups for the ps3 interrupt routines to support all HV device in a generic way. Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] PS3: Remove duplicate variable assignementGeoff Levand1-1/+0
A minor change to remove a duplicate variable assignement in ps3_mm_shutdown(); Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] PS3: Add DABR supportGeoff Levand1-0/+7
Add PS3 support for the PowerPC processor's Data Address Breakpoint Register (DABR). Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Fix spurious vectors on weird MPICJosh Boyer1-1/+4
The weird TSI 10x MPIC needs an EOI after getting a spurious vector. This patch uses the existing MPIC_SPV_EOI flag to fix this issue. Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Use menuconfig objects II - MacintoshJan Engelhardt1-2/+6
Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu", so that the user can disable all the options in that menu at once instead of having to disable each option separately. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Fix suspend states againJohannes Berg4-65/+44
In commit 0fba3a1f39f8b0a50b56c8b068fa52131cbc84c2 (a very long time ago, May 2006), I fixed a bug that caused powermacs to crash when you tried entering standby/mem suspend states. As I'm now getting more familiar with the suspend code I notice a few more things: 1. we previously misunderstood what pm_ops is for, it isn't supposed to be for doing platform dependent suspend/resume stuff that needs to be done for suspend to disk (as we currently try to use it!), it is instead for entering platform dependent suspend states ("standby", "mem"). 2. due to the first point, we never properly save FPU and altivec states when suspending to disk. It probably hasn't hurt yet because the process that writes the "disk" to /sys/power/state uses neither and its context is used. This patch addresses these points as follows: 1. remove all pm_ops from powermac, powermac suspend to ram isn't currently usable via /sys/power/state but is done via the PMU instead. 2. move the code responsible for storing FPU/altivec state into save_processor_state and the set_context() call to restore_processor_state. 3. add a call to kernel_enable_spe() It may look like there is some code removal missing but that is actually because the new suspend.h file overrides the ppc/suspend.h one which was previously used. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Remove arch/powerpc's dependence on asm-ppc/pg{alloc,table}.hDavid Gibson8-646/+1532
Currently, all 32-bit powerpc platforms use asm-ppc/pgtable.h and asm-ppc/pgalloc.h, even when otherwise compiled with ARCH=powerpc. Those asm-ppc files are a fairly nasty tangle of #ifdefs including a bunch of things which shouldn't be necessary any more in arch/powerpc. Cleaning up that mess is going to take a while, but this patch is a first step. It separates the asm-powerpc/pg{alloc,table}.h into 64 bit and 32 bit versions in asm-powerpc, which the basic .h files in asm-powerpc select based on config. We make a few tiny tweaks to the innards of the files along the way, making the outermost ifdefs (double-inclusion protection and __KERNEL__) a little cleaner, and #including asm-generic/pgtable.h from the top-level asm-powerpc/pgtable.h (since both the old 32-bit and 64-bit versions ended with such an #include). Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Fix STRICT_MM_TYPECHECKSDavid Gibson4-4/+5
Since we don't have it active by default, the STRICT_MM_TYPECHECKS option has bitrotted again. This patch fixes a couple of simple build fixes if the option is selected. First, pud_t mustn't be defined in page.h on 32-bit systems, because it conflicts with the version in the generic pud-folding code. Second, pci_32.c is missing a __pgprot() wrapper call. Third, a couple of PS3 files use constants of type pgprot_t when they need the raw values, we add pgprot_val() calls to fix this. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Revise PPC44x MMU code for arch/powerpcDavid Gibson5-68/+100
This patch takes the definitions for the PPC44x MMU (a software loaded TLB) from asm-ppc/mmu.h, cleans them up of things no longer necessary in arch/powerpc and puts them in a new asm-powerpc/mmu_44x.h file. It also substantially simplifies arch/powerpc/mm/44x_mmu.c and makes a couple of small fixes necessary for the 44x MMU code to build and work properly in arch/powerpc. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-02[POWERPC] Uninline of_iomap functionChristian Krafft2-11/+19
There is no big reason to have that function inlined. Signed-off-by: Christian Krafft <krafft@de.ibm.com> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-21 05:21:58 +0000