summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-05-08Merge branch 'master' of ↵David S. Miller32-173/+612
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: include/net/tcp.h
2009-05-07net: remove stale reference to fastroute from Kconfig help textAshish Karkare1-6/+0
Signed-off-by: Ashish Karkare <akarkare@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-07smsc911x: fix calculation of res_size for ioremapMatthias Ludwig1-1/+1
fix size of remaped iomem, which is 1 byte to small (e.g. mappes only 0xff bytes instead of 0x100) Signed-off-by: Matthias Ludwig <mludwig@ultratronik.de> Acked-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-07e1000/e1000e/igb/ixgb: don't txhang after link downJesse Brandeburg4-0/+8
after the recent changes to wired drivers to use only netif_carrier_off the driver can have outstanding tx work to complete that will never complete once link is down. Since the intel hardware will hold this tx work forever, the driver notices a tx timeout condition internally and might try to instigate printk and reset of the part with a netif_stop_queue, which doesn't work because link is down. Don't bother arming to tx hang detection when link is down. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-07ixgbe: Typecase '1' for 64 bit shiftNelson, Shannon1-3/+3
Make sure we don't get any sign-extend issues when we shift a 1 into bit 31. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-07ixgbe: fix failing to log fan failuresDon Skidmore1-2/+26
We weren't logging the 82598AT fan failure if it occurred before (ixgbe_open) as we hadn't sent up to catch the interrupt that event caused. This patch checks for this failure in: ixgbe_probe - So we can log the failure asap. We check right after we set up the adapter->flags, which is when we know that we have a fan. ixgbe_up_complete - To catch failures that may have happened between probe and when we set up the interrupt that would normally detect the fan failure. To enable all of this we need to initialize the adapter flag with IXGBE_FLAG_FAN_FAIL_CAPABLE when the NIC contained a fan. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-07ixgbe: Enable L2 header split in 82599Yi Zou2-1/+3
This enables L2 header split when packet split is enabled for 82599. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-07ixgbe: set queue0 for srrctl configuration correctly for DCBAlexander Duyck1-1/+12
The current configuration is not setting queue 0 correctly for DCB configurations. As a result unconfigured queues are being used to setup the SRRCTL register rx buffer len sizes. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-07ixgbe: always set header length in SRRCTLAlexander Duyck1-18/+10
As per the documentation for 82599 in order to support hardware RSC the header size must be set. This is only currently done for packet split mode. This patch sets the header buffer length for all modes. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-07tcp: tcp_prequeue() can use keyed wakeupsEric Dumazet1-1/+2
We can avoid waking up tasks not interested in receive notifications, using wake_up_interruptible_poll() instead of wake_up_interruptible() Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-07tcp: tcp_prequeue() cleanupEric Dumazet1-22/+23
Small cleanup patch to reduce line lengths, before a change in tcp_prequeue(). Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06net: Add missing rculist.h include to netdevice.hDavid S. Miller1-0/+1
Otherwise list_for_each_entry_rcu() et al. aren't visible and we get build failures in some configurations. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06net: Make inet_twsk_put similar to sock_putArnaldo Carvalho de Melo1-10/+13
By separating the freeing code from the refcounting decrementing. Probably reducing icache pressure when we still have reference counts to go. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06net: update skb_recycle_check() for hardware timestamping changesLennert Buytenhek1-0/+2
Commit ac45f602ee3d1b6f326f68bc0c2591ceebf05ba4 ("net: infrastructure for hardware time stamping") added two skb initialization actions to __alloc_skb(), which need to be added to skb_recycle_check() as well. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Patrick Ohly <patrick.ohly@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06bnx2: Fix panic in bnx2_poll_work().Michael Chan1-2/+4
Add barrier() to bnx2_get_hw_{tx|rx}_cons() to fix this issue: http://bugzilla.kernel.org/show_bug.cgi?id=12698 This issue was reported by multiple i386 users. Without barrier(), the compiled code looks like the following where %eax contains the address of the tx_cons or rx_cons in the DMA status block. The status block contents can change between the cmpb and the movzwl instruction. The driver would crash if the value was not 0xff during the cmpb instruction, but changed to 0xff during the movzwl instruction. 6828: 80 38 ff cmpb $0xff,(%eax) 682b: 0f b7 10 movzwl (%eax),%edx With the added barrier(), the compiled code now looks correct: 683d: 0f b7 10 movzwl (%eax),%edx 6840: 0f b6 c2 movzbl %dl,%eax 6843: 3d ff 00 00 00 cmp $0xff,%eax Thanks to Pascal de Bruijn <pmjdebruijn@pcode.nl> for reporting the problem and Holger Noefer <hnoefer@pironet-ndh.com> for patiently testing test patches for us. Also updated version to 2.0.1. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06net-sched: fix bfifo default limitPatrick McHardy1-1/+1
When no limit is given, the bfifo uses a default of tx_queue_len * mtu. Packets handled by qdiscs include the link layer header, so this should be taken into account, similar to what other qdiscs do. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06igb: resolve panic on shutdown when SR-IOV is enabledAlexander Duyck1-7/+5
The setup_rctl call was making a call into the ring structure after it had been freed. This was causing a panic on shutdown. This call wasn't necessary since it is possible to get the needed index from adapter->vfs_allocated_count. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06Merge branch 'linux-2.6.30.y' of ↵David S. Miller2-7/+21
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2009-05-06ixgbe: Proposed PARCH PCIE legacy I/O port free intel 10Gb NIC drivergouji-new1-7/+12
Traditionally Intel based NIC drivers request I/O port even though it doesn't need that really. Intel PCIE 10Gb driver (ixgbe) also requests I/O port but it doesn't need it either. This is a little inconvenient situation because sometimes we have to handle those cards on the slots where any I/O space is not attached. So we made pach which makes ixgbe driver legacy I/O port free. Signed-off-by: Masayuki Gouji <gouji.masayuki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06ixgbe: Return PCI_ERS_RESULT_DISCONNECT when bus is disabledBreno Leitao1-0/+3
According to the "PCI Error Recovery" document, if after a recovery, the bus is disabled, the error_detected function should return PCI_ERS_RESULT_DISCONNECT. Actually ixgbe error_detected function is always returning PCI_ERS_RESULT_NEED_RESET, even if the bus is in failure. This patch just check if the bus is disabled and then returns PCI_ERS_RESULT_DISCONNET. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06ixgbe: remove ixgbe_napi_add/del_all referencesAlexander Duyck1-2/+0
There were still some references to napi_add/del_all left after the dynamic vector allocation patch. This patch removes those references since the ixgbe_napi_add/del_all calls are no longer needed as the napi struct is added when the vector is created, and deleted when the vector is freed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06ixgbe: skb_record_rx_queue should record rx queue instead of vectorAlexander Duyck1-2/+3
currently ixgbe_receive_skb is passing the vector index to skb_record_rx_queue instead of the queue index. This patch changes that so that the ring index is passed instead. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06ixgbe: make q_vectors dynamic to reduce netdev sizeAlexander Duyck4-133/+158
Currently the q_vectors are being allocated statically inside of the adapter struct. This increases the overall size of the adapter struct when we can easily allocate the vectors dynamically. This patch changes that behavior so that the q_vectors are allocated dynamically and the napi structures are automatically allocated inside of the q_vectors as needed. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06pci: update 82576 sr-iov quirk with latest device IDsAlexander Duyck1-0/+2
The current quirk doesn't include all 82576 device IDs. This update resolves that. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06igb/igbvf: set rx csum always enabled in hw, disable via swAlexander Duyck3-10/+12
An issue was found in which rx checksum could not be enabled without resetting the interface. The issue was the hardware enable was not being done via ethtool. To resolve this issue and prevent conflicts with VF configuration we will leave the feature always enabled in hardware, and then in software we will choose to ignore the results via a sw flag. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06igbvf: cleanup flags and allow for rx checksum to be disabledAlexander Duyck3-33/+26
This patch cleans up a number of unused or unneeded feature flags. As a result of these changes the user should now be able to enable or disable rx checksumming via ethtool. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06mv643xx_eth: only unmask RX and TX_END interrupts for available queuesSaeed Bishara1-6/+14
It is not a good idea to blindly unmask the RX and TX_END interrupts for all eight queues on all mv643xx_eth hardware, since some variations of the hardware have less than eight transmit/receive queues, and the RX/TX_END interrupts for the queues they don't have can be in use by other interrupt sources. Signed-off-by: Saeed Bishara <saeed@marvell.com> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06mv643xx_eth: rework receive skb cache alignmentLennert Buytenhek1-8/+13
On the platforms that mv643xx_eth is used on, the manual skb->data alignment logic in mv643xx_eth can be simplified, as the only case we need to handle is where NET_SKB_PAD is not a multiple of the cache line size. If this is the case, the extra padding we need can be computed at compile time, while if NET_SKB_PAD _is_ a multiple of the cache line size, the code can be optimised out entirely. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06mv643xx_eth: minor register definition cleanupLennert Buytenhek1-23/+21
Move the definitions for the SDMA and port serial configuration register values to where all the other register definitions live, and expand the shifts to 32 bit constants. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06mv643xx_eth: count handling a link event as one unit of napi workLennert Buytenhek1-0/+1
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06mv643xx_eth: fix variable shadowing sparse warningLennert Buytenhek1-1/+0
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06netxen: fix bonding supportDhananjay Phadke6-168/+82
o Pause traffic during mac addr change. o Enable setting mac address for NX3031. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06netxen: fix mac list managementDhananjay Phadke3-79/+58
o use standard linked list api for mac addr list management in NX3031. o release mac addresses in firmware in dev close(). Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06netxen: fix race in tx ring acccessDhananjay Phadke3-7/+8
Fix the distance check between tx ring producer and consumer that could lead to tx ring wrap around. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06wimax: oops: wimax_dev_add() is the only one that can initialize the stateInaky Perez-Gonzalez1-2/+15
When a new wimax_dev is created, it's state has to be __WIMAX_ST_NULL until wimax_dev_add() is succesfully called. This allows calls into the stack that happen before said time to be rejected. Until now, the state was being set (by mistake) to UNINITIALIZED, which was allowing calls such as wimax_report_rfkill_hw() to go through even when a call to wimax_dev_add() had failed; that was causing an oops when touching uninitialized data. This situation is normal when the device starts reporting state before the whole initialization has been completed. It just has to be dealt with. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-06wimax: fix oops if netlink fails to add attributeInaky Perez-Gonzalez1-5/+6
When sending a message to user space using wimax_msg(), if nla_put() fails, correctly interpret the return code from wimax_msg_alloc() as an err ptr and return the error code instead of crashing (as it is assuming than non-NULL means the pointer is ok). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-05Bluetooth: Move dev_set_name() to a context that can sleepMarcel Holtmann1-4/+3
Setting the name of a sysfs device has to be done in a context that can actually sleep. It allocates its memory with GFP_KERNEL. Previously it was a static (size limited) string and that got changed to accommodate longer device names. So move the dev_set_name() just before calling device_add() which is executed in a work queue. This fixes the following error: [ 110.012125] BUG: sleeping function called from invalid context at mm/slub.c:1595 [ 110.012135] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper [ 110.012141] 2 locks held by swapper/0: [ 110.012145] #0: (hci_task_lock){++.-.+}, at: [<ffffffffa01f822f>] hci_rx_task+0x2f/0x2d0 [bluetooth] [ 110.012173] #1: (&hdev->lock){+.-.+.}, at: [<ffffffffa01fb9e2>] hci_event_packet+0x72/0x25c0 [bluetooth] [ 110.012198] Pid: 0, comm: swapper Tainted: G W 2.6.30-rc4-g953cdaa #1 [ 110.012203] Call Trace: [ 110.012207] <IRQ> [<ffffffff8023eabd>] __might_sleep+0x14d/0x170 [ 110.012228] [<ffffffff802cfbe1>] __kmalloc+0x111/0x170 [ 110.012239] [<ffffffff803c2094>] kvasprintf+0x64/0xb0 [ 110.012248] [<ffffffff803b7a5b>] kobject_set_name_vargs+0x3b/0xa0 [ 110.012257] [<ffffffff80465326>] dev_set_name+0x76/0xa0 [ 110.012273] [<ffffffffa01fb9e2>] ? hci_event_packet+0x72/0x25c0 [bluetooth] [ 110.012289] [<ffffffffa01ffc1d>] hci_conn_add_sysfs+0x3d/0x70 [bluetooth] [ 110.012303] [<ffffffffa01fba2c>] hci_event_packet+0xbc/0x25c0 [bluetooth] [ 110.012312] [<ffffffff80516eb0>] ? sock_def_readable+0x80/0xa0 [ 110.012328] [<ffffffffa01fee0c>] ? hci_send_to_sock+0xfc/0x1c0 [bluetooth] [ 110.012343] [<ffffffff80516eb0>] ? sock_def_readable+0x80/0xa0 [ 110.012347] [<ffffffff805e88c5>] ? _read_unlock+0x75/0x80 [ 110.012354] [<ffffffffa01fee0c>] ? hci_send_to_sock+0xfc/0x1c0 [bluetooth] [ 110.012360] [<ffffffffa01f8403>] hci_rx_task+0x203/0x2d0 [bluetooth] [ 110.012365] [<ffffffff80250ab5>] tasklet_action+0xb5/0x160 [ 110.012369] [<ffffffff8025116c>] __do_softirq+0x9c/0x150 [ 110.012372] [<ffffffff805e850f>] ? _spin_unlock+0x3f/0x80 [ 110.012376] [<ffffffff8020cbbc>] call_softirq+0x1c/0x30 [ 110.012380] [<ffffffff8020f01d>] do_softirq+0x8d/0xe0 [ 110.012383] [<ffffffff80250df5>] irq_exit+0xc5/0xe0 [ 110.012386] [<ffffffff8020e71d>] do_IRQ+0x9d/0x120 [ 110.012389] [<ffffffff8020c3d3>] ret_from_intr+0x0/0xf [ 110.012391] <EOI> [<ffffffff80431832>] ? acpi_idle_enter_bm+0x264/0x2a6 [ 110.012399] [<ffffffff80431828>] ? acpi_idle_enter_bm+0x25a/0x2a6 [ 110.012403] [<ffffffff804f50d5>] ? cpuidle_idle_call+0xc5/0x130 [ 110.012407] [<ffffffff8020a4b4>] ? cpu_idle+0xc4/0x130 [ 110.012411] [<ffffffff805d2268>] ? rest_init+0x88/0xb0 [ 110.012416] [<ffffffff807e2fbd>] ? start_kernel+0x3b5/0x412 [ 110.012420] [<ffffffff807e2281>] ? x86_64_start_reservations+0x91/0xb5 [ 110.012424] [<ffffffff807e2394>] ? x86_64_start_kernel+0xef/0x11b Based on a report by Davide Pesavento <davidepesa@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Tested-by: Hugo Mildenberger <hugo.mildenberger@namir.de> Tested-by: Bing Zhao <bzhao@marvell.com>
2009-05-05lasi_82596: fix printk format warningAlexander Beregalov1-3/+3
drivers/net/lasi_82596.c:164: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'resource_size_t' drivers/net/lasi_82596.c:169: warning: format '%lx' expects type 'long unsigned int', but argument 2 has type 'resource_size_t' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-05tcp:fix the code indentShan Wei1-1/+1
Signed-off-by: Shan Wei<shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-05r6040: bump version to 0.23 and date to 05May2009Florian Fainelli1-2/+2
Bump version to 0.23 and date to 05May2009. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-05r6040: check for absent PHYFlorian Fainelli1-0/+8
Some devices have two R6040 MACs but the second one is not wired to any PHY, therefore the interface is just unusable. Warn the user about that and prevent device from registering. Tested-by: bifferos <bifferos@yahoo.co.uk> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-05bonding: get rid of CONFIG_PROC_FS ifdefsJiri Pirko1-10/+20
Remove CONFIG_PROC_FS ifdefs from the code by adding void functions. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bonding/bond_main.c | 30 ++++++++++++++++++++---------- 1 files changed, 20 insertions(+), 10 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-05net: introduce a list of device addresses dev_addr_list (v6)Jiri Pirko3-2/+312
v5 -> v6 (current): -removed so far unused static functions -corrected dev_addr_del_multiple to call del instead of add v4 -> v5: -added device address type (suggested by davem) -removed refcounting (better to have simplier code then safe potentially few bytes) v3 -> v4: -changed kzalloc to kmalloc in __hw_addr_add_ii() -ASSERT_RTNL() avoided in dev_addr_flush() and dev_addr_init() v2 -> v3: -removed unnecessary rcu read locking -moved dev_addr_flush() calling to ensure no null dereference of dev_addr v1 -> v2: -added forgotten ASSERT_RTNL to dev_addr_init and dev_addr_flush -removed unnecessary rcu_read locking in dev_addr_init -use compare_ether_addr_64bits instead of compare_ether_addr -use L1_CACHE_BYTES as size for allocating struct netdev_hw_addr -use call_rcu instead of rcu_synchronize -moved is_etherdev_addr into __KERNEL__ ifdef This patch introduces a new list in struct net_device and brings a set of functions to handle the work with device address list. The list is a replacement for the original dev_addr field and because in some situations there is need to carry several device addresses with the net device. To be backward compatible, dev_addr is made to point to the first member of the list so original drivers sees no difference. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-05net: smsc911x: add power management functionsDaniel Mack1-0/+46
This adds a power management implementation for smsc911x.c which assumes the chips remains powered during suspend. The device is put in its D1 power saving mode. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-05Merge branch 'master' of ↵David S. Miller5-32/+34
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2009-05-05Merge branch 'master' of ↵David S. Miller7-49/+68
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-05-05netfilter: ctnetlink: fix wrong message type in user updatesPablo Neira Ayuso1-28/+20
This patch fixes the wrong message type that are triggered by user updates, the following commands: (term1)# conntrack -I -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state LISTEN (term1)# conntrack -U -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state SYN_SENT (term1)# conntrack -U -p tcp -s 1.1.1.1 -d 2.2.2.2 -t 10 --sport 10 --dport 20 --state SYN_RECV only trigger event message of type NEW, when only the first is NEW while others should be UPDATE. (term2)# conntrack -E [NEW] tcp 6 10 LISTEN src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0 [NEW] tcp 6 10 SYN_SENT src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0 [NEW] tcp 6 10 SYN_RECV src=1.1.1.1 dst=2.2.2.2 sport=10 dport=20 [UNREPLIED] src=2.2.2.2 dst=1.1.1.1 sport=20 dport=10 mark=0 This patch also removes IPCT_REFRESH from the bitmask since it is not of any use. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-05-05netfilter: xt_cluster: fix use of cluster match with 32 nodesPablo Neira Ayuso2-1/+9
This patch fixes a problem when you use 32 nodes in the cluster match: % iptables -I PREROUTING -t mangle -i eth0 -m cluster \ --cluster-total-nodes 32 --cluster-local-node 32 \ --cluster-hash-seed 0xdeadbeef -j MARK --set-mark 0xffff iptables: Invalid argument. Run `dmesg' for more information. % dmesg | tail -1 xt_cluster: this node mask cannot be higher than the total number of nodes The problem is related to this checking: if (info->node_mask >= (1 << info->total_nodes)) { printk(KERN_ERR "xt_cluster: this node mask cannot be " "higher than the total number of nodes\n"); return false; } (1 << 32) is 1. Thus, the checking fails. BTW, I said this before but I insist: I have only tested the cluster match with 2 nodes getting ~45% extra performance in an active-active setup. The maximum limit of 32 nodes is still completely arbitrary. I'd really appreciate if people that have more nodes in their setups let me know. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-05-05netfilter: ip6t_ipv6header: fix match on packets ending with NEXTHDR_NONEChristoph Paasch1-3/+3
As packets ending with NEXTHDR_NONE don't have a last extension header, the check for the length needs to be after the check for NEXTHDR_NONE. Signed-off-by: Christoph Paasch <christoph.paasch@gmail.com> Signed-off-by: Patrick McHardy <kaber@trash.net>
2009-05-05netfilter: add missing linux/types.h include to xt_LED.hPatrick McHardy1-0/+2
Pointed out by Dave Miller: CHECK include/linux/netfilter (57 files) /home/davem/src/GIT/net-2.6/usr/include/linux/netfilter/xt_LED.h:6: found __[us]{8,16,32,64} type without #include <linux/types.h> Signed-off-by: Patrick McHardy <kaber@trash.net>