summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
diff options
context:
space:
mode:
Diffstat (limited to 'tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh')
-rwxr-xr-xtools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh565
1 files changed, 565 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
new file mode 100755
index 000000000000..94fdbf215c14
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
@@ -0,0 +1,565 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test various interface configuration scenarios. Observe that configurations
+# deemed valid by mlxsw succeed, invalid configurations fail and that no traces
+# are produced. To prevent the test from passing in case traces are produced,
+# the user can set the 'kernel.panic_on_warn' and 'kernel.panic_on_oops'
+# sysctls in its environment.
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+ rif_set_addr_test
+ rif_inherit_bridge_addr_test
+ rif_non_inherit_bridge_addr_test
+ vlan_interface_deletion_test
+ bridge_deletion_test
+ bridge_vlan_flags_test
+ vlan_1_test
+ lag_bridge_upper_test
+ duplicate_vlans_test
+ vlan_rif_refcount_test
+ subport_rif_refcount_test
+ vlan_dev_deletion_test
+ lag_unlink_slaves_test
+ lag_dev_deletion_test
+ vlan_interface_uppers_test
+ devlink_reload_test
+"
+NUM_NETIFS=2
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+
+setup_prepare()
+{
+ swp1=${NETIFS[p1]}
+ swp2=${NETIFS[p2]}
+
+ ip link set dev $swp1 up
+ ip link set dev $swp2 up
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ ip link set dev $swp2 down
+ ip link set dev $swp1 down
+}
+
+rif_set_addr_test()
+{
+ local swp1_mac=$(mac_get $swp1)
+ local swp2_mac=$(mac_get $swp2)
+
+ RET=0
+
+ # $swp1 and $swp2 likely got their IPv6 local addresses already, but
+ # here we need to test the transition to RIF.
+ ip addr flush dev $swp1
+ ip addr flush dev $swp2
+ sleep .1
+
+ ip addr add dev $swp1 192.0.2.1/28
+ check_err $?
+
+ ip link set dev $swp1 addr 00:11:22:33:44:55
+ check_err $?
+
+ # IP address enablement should be rejected if the MAC address prefix
+ # doesn't match other RIFs.
+ ip addr add dev $swp2 192.0.2.2/28 &>/dev/null
+ check_fail $? "IP address addition passed for a device with a wrong MAC"
+ ip addr add dev $swp2 192.0.2.2/28 2>&1 >/dev/null \
+ | grep -q mlxsw_spectrum
+ check_err $? "no extack for IP address addition"
+
+ ip link set dev $swp2 addr 00:11:22:33:44:66
+ check_err $?
+ ip addr add dev $swp2 192.0.2.2/28 &>/dev/null
+ check_err $?
+
+ # Change of MAC address of a RIF should be forbidden if the new MAC
+ # doesn't share the prefix with other MAC addresses.
+ ip link set dev $swp2 addr 00:11:22:33:00:66 &>/dev/null
+ check_fail $? "change of MAC address passed for a wrong MAC"
+ ip link set dev $swp2 addr 00:11:22:33:00:66 2>&1 >/dev/null \
+ | grep -q mlxsw_spectrum
+ check_err $? "no extack for MAC address change"
+
+ log_test "RIF - bad MAC change"
+
+ ip addr del dev $swp2 192.0.2.2/28
+ ip addr del dev $swp1 192.0.2.1/28
+
+ ip link set dev $swp2 addr $swp2_mac
+ ip link set dev $swp1 addr $swp1_mac
+}
+
+rif_inherit_bridge_addr_test()
+{
+ RET=0
+
+ # Create first RIF
+ ip addr add dev $swp1 192.0.2.1/28
+ check_err $?
+
+ # Create a FID RIF
+ ip link add name br1 up type bridge vlan_filtering 0
+ ip link set dev $swp2 master br1
+ ip addr add dev br1 192.0.2.17/28
+ check_err $?
+
+ # Prepare a device with a low MAC address
+ ip link add name d up type dummy
+ ip link set dev d addr 00:11:22:33:44:55
+
+ # Attach the device to br1. That prompts bridge address change, which
+ # should be vetoed, thus preventing the attachment.
+ ip link set dev d master br1 &>/dev/null
+ check_fail $? "Device with low MAC was permitted to attach a bridge with RIF"
+ ip link set dev d master br1 2>&1 >/dev/null \
+ | grep -q mlxsw_spectrum
+ check_err $? "no extack for bridge attach rejection"
+
+ ip link set dev $swp2 addr 00:11:22:33:44:55 &>/dev/null
+ check_fail $? "Changing swp2's MAC address permitted"
+ ip link set dev $swp2 addr 00:11:22:33:44:55 2>&1 >/dev/null \
+ | grep -q mlxsw_spectrum
+ check_err $? "no extack for bridge port MAC address change rejection"
+
+ log_test "RIF - attach port with bad MAC to bridge"
+
+ ip link del dev d
+ ip link del dev br1
+ ip addr del dev $swp1 192.0.2.1/28
+}
+
+rif_non_inherit_bridge_addr_test()
+{
+ local swp2_mac=$(mac_get $swp2)
+
+ RET=0
+
+ # Create first RIF
+ ip addr add dev $swp1 192.0.2.1/28
+ check_err $?
+
+ # Create a FID RIF
+ ip link add name br1 up type bridge vlan_filtering 0
+ ip link set dev br1 addr $swp2_mac
+ ip link set dev $swp2 master br1
+ ip addr add dev br1 192.0.2.17/28
+ check_err $?
+
+ # Prepare a device with a low MAC address
+ ip link add name d up type dummy
+ ip link set dev d addr 00:11:22:33:44:55
+
+ # Attach the device to br1. Since the bridge address was set, it should
+ # work.
+ ip link set dev d master br1 &>/dev/null
+ check_err $? "Could not attach a device with low MAC to a bridge with RIF"
+
+ # Port MAC address change should be allowed for a bridge with set MAC.
+ ip link set dev $swp2 addr 00:11:22:33:44:55
+ check_err $? "Changing swp2's MAC address not permitted"
+
+ log_test "RIF - attach port with bad MAC to bridge with set MAC"
+
+ ip link set dev $swp2 addr $swp2_mac
+ ip link del dev d
+ ip link del dev br1
+ ip addr del dev $swp1 192.0.2.1/28
+}
+
+vlan_interface_deletion_test()
+{
+ # Test that when a VLAN interface is deleted, its associated router
+ # interface (RIF) is correctly deleted and not leaked. See commit
+ # c360867ec46a ("mlxsw: spectrum: Delete RIF when VLAN device is
+ # removed") for more details
+ RET=0
+
+ ip link add name br0 type bridge vlan_filtering 1
+ ip link set dev $swp1 master br0
+
+ ip link add link br0 name br0.10 type vlan id 10
+ ip -6 address add 2001:db8:1::1/64 dev br0.10
+ ip link del dev br0.10
+
+ # If we leaked the previous RIF, then this should produce a trace
+ ip link add link br0 name br0.20 type vlan id 20
+ ip -6 address add 2001:db8:1::1/64 dev br0.20
+ ip link del dev br0.20
+
+ log_test "vlan interface deletion"
+
+ ip link del dev br0
+}
+
+bridge_deletion_test()
+{
+ # Test that when a bridge with VLAN interfaces is deleted, we correctly
+ # delete the associated RIFs. See commit 602b74eda813 ("mlxsw:
+ # spectrum_switchdev: Do not leak RIFs when removing bridge") for more
+ # details
+ RET=0
+
+ ip link add name br0 type bridge vlan_filtering 1
+ ip link set dev $swp1 master br0
+ ip -6 address add 2001:db8::1/64 dev br0
+
+ ip link add link br0 name br0.10 type vlan id 10
+ ip -6 address add 2001:db8:1::1/64 dev br0.10
+
+ ip link add link br0 name br0.20 type vlan id 20
+ ip -6 address add 2001:db8:2::1/64 dev br0.20
+
+ ip link del dev br0
+
+ # If we leaked previous RIFs, then this should produce a trace
+ ip -6 address add 2001:db8:1::1/64 dev $swp1
+ ip -6 address del 2001:db8:1::1/64 dev $swp1
+
+ log_test "bridge deletion"
+}
+
+bridge_vlan_flags_test()
+{
+ # Test that when bridge VLAN flags are toggled, we do not take
+ # unnecessary references on related structs. See commit 9e25826ffc94
+ # ("mlxsw: spectrum_switchdev: Fix port_vlan refcounting") for more
+ # details
+ RET=0
+
+ ip link add name br0 type bridge vlan_filtering 1
+ ip link set dev $swp1 master br0
+
+ bridge vlan add vid 10 dev $swp1 pvid untagged
+ bridge vlan add vid 10 dev $swp1 untagged
+ bridge vlan add vid 10 dev $swp1 pvid
+ bridge vlan add vid 10 dev $swp1
+ ip link del dev br0
+
+ # If we did not handle references correctly, then this should produce a
+ # trace
+ devlink dev reload "$DEVLINK_DEV"
+
+ # Allow netdevices to be re-created following the reload
+ sleep 20
+
+ log_test "bridge vlan flags"
+}
+
+vlan_1_test()
+{
+ # Test that VLAN 1 can be configured over mlxsw ports. In the past it
+ # was used internally for untagged traffic. See commit 47bf9df2e820
+ # ("mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAG") for more
+ # details
+ RET=0
+
+ ip link add link $swp1 name $swp1.1 type vlan id 1
+ check_err $? "did not manage to create vlan 1 when should"
+
+ log_test "vlan 1"
+
+ ip link del dev $swp1.1
+}
+
+lag_bridge_upper_test()
+{
+ # Test that ports cannot be enslaved to LAG devices that have uppers
+ # and that failure is handled gracefully. See commit b3529af6bb0d
+ # ("spectrum: Reference count VLAN entries") for more details
+ RET=0
+
+ ip link add name bond1 type bond mode 802.3ad
+
+ ip link add name br0 type bridge vlan_filtering 1
+ ip link set dev bond1 master br0
+
+ ip link set dev $swp1 down
+ ip link set dev $swp1 master bond1 &> /dev/null
+ check_fail $? "managed to enslave port to lag when should not"
+
+ # This might generate a trace, if we did not handle the failure
+ # correctly
+ ip -6 address add 2001:db8:1::1/64 dev $swp1
+ ip -6 address del 2001:db8:1::1/64 dev $swp1
+
+ log_test "lag with bridge upper"
+
+ ip link del dev br0
+ ip link del dev bond1
+}
+
+duplicate_vlans_test()
+{
+ # Test that on a given port a VLAN is only used once. Either as VLAN
+ # in a VLAN-aware bridge or as a VLAN device
+ RET=0
+
+ ip link add name br0 type bridge vlan_filtering 1
+ ip link set dev $swp1 master br0
+ bridge vlan add vid 10 dev $swp1
+
+ ip link add link $swp1 name $swp1.10 type vlan id 10 &> /dev/null
+ check_fail $? "managed to create vlan device when should not"
+
+ bridge vlan del vid 10 dev $swp1
+ ip link add link $swp1 name $swp1.10 type vlan id 10
+ check_err $? "did not manage to create vlan device when should"
+ bridge vlan add vid 10 dev $swp1 &> /dev/null
+ check_fail $? "managed to add bridge vlan when should not"
+
+ log_test "duplicate vlans"
+
+ ip link del dev $swp1.10
+ ip link del dev br0
+}
+
+vlan_rif_refcount_test()
+{
+ # Test that RIFs representing VLAN interfaces are not affected from
+ # ports member in the VLAN. We use the offload indication on routes
+ # configured on the RIF to understand if it was created / destroyed
+ RET=0
+
+ ip link add name br0 type bridge vlan_filtering 1
+ ip link set dev $swp1 master br0
+
+ ip link set dev $swp1 up
+ ip link set dev br0 up
+
+ ip link add link br0 name br0.10 up type vlan id 10
+ ip -6 address add 2001:db8:1::1/64 dev br0.10
+
+ ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+ check_err $? "vlan rif was not created before adding port to vlan"
+
+ bridge vlan add vid 10 dev $swp1
+ ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+ check_err $? "vlan rif was destroyed after adding port to vlan"
+
+ bridge vlan del vid 10 dev $swp1
+ ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+ check_err $? "vlan rif was destroyed after removing port from vlan"
+
+ ip link set dev $swp1 nomaster
+ ip -6 route get fibmatch 2001:db8:1::2 dev br0.10 | grep -q offload
+ check_fail $? "vlan rif was not destroyed after unlinking port from bridge"
+
+ log_test "vlan rif refcount"
+
+ ip link del dev br0.10
+ ip link set dev $swp1 down
+ ip link del dev br0
+}
+
+subport_rif_refcount_test()
+{
+ # Test that RIFs representing upper devices of physical ports are
+ # reference counted correctly and destroyed when should. We use the
+ # offload indication on routes configured on the RIF to understand if
+ # it was created / destroyed
+ RET=0
+
+ ip link add name bond1 type bond mode 802.3ad
+ ip link set dev $swp1 down
+ ip link set dev $swp2 down
+ ip link set dev $swp1 master bond1
+ ip link set dev $swp2 master bond1
+
+ ip link set dev bond1 up
+ ip link add link bond1 name bond1.10 up type vlan id 10
+ ip -6 address add 2001:db8:1::1/64 dev bond1
+ ip -6 address add 2001:db8:2::1/64 dev bond1.10
+
+ ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
+ check_err $? "subport rif was not created on lag device"
+ ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
+ check_err $? "subport rif was not created on vlan device"
+
+ ip link set dev $swp1 nomaster
+ ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
+ check_err $? "subport rif of lag device was destroyed when should not"
+ ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
+ check_err $? "subport rif of vlan device was destroyed when should not"
+
+ ip link set dev $swp2 nomaster
+ ip -6 route get fibmatch 2001:db8:1::2 dev bond1 | grep -q offload
+ check_fail $? "subport rif of lag device was not destroyed when should"
+ ip -6 route get fibmatch 2001:db8:2::2 dev bond1.10 | grep -q offload
+ check_fail $? "subport rif of vlan device was not destroyed when should"
+
+ log_test "subport rif refcount"
+
+ ip link del dev bond1.10
+ ip link del dev bond1
+}
+
+vlan_dev_deletion_test()
+{
+ # Test that VLAN devices are correctly deleted / unlinked when enslaved
+ # to bridge
+ RET=0
+
+ ip link add name br10 type bridge
+ ip link add name br20 type bridge
+ ip link add name br30 type bridge
+ ip link add link $swp1 name $swp1.10 type vlan id 10
+ ip link add link $swp1 name $swp1.20 type vlan id 20
+ ip link add link $swp1 name $swp1.30 type vlan id 30
+ ip link set dev $swp1.10 master br10
+ ip link set dev $swp1.20 master br20
+ ip link set dev $swp1.30 master br30
+
+ # If we did not handle the situation correctly, then these operations
+ # might produce a trace
+ ip link set dev $swp1.30 nomaster
+ ip link del dev $swp1.20
+ # Deletion via ioctl uses different code paths from netlink
+ vconfig rem $swp1.10 &> /dev/null
+
+ log_test "vlan device deletion"
+
+ ip link del dev $swp1.30
+ ip link del dev br30
+ ip link del dev br20
+ ip link del dev br10
+}
+
+lag_create()
+{
+ ip link add name bond1 type bond mode 802.3ad
+ ip link set dev $swp1 down
+ ip link set dev $swp2 down
+ ip link set dev $swp1 master bond1
+ ip link set dev $swp2 master bond1
+
+ ip link add link bond1 name bond1.10 type vlan id 10
+ ip link add link bond1 name bond1.20 type vlan id 20
+
+ ip link add name br0 type bridge vlan_filtering 1
+ ip link set dev bond1 master br0
+
+ ip link add name br10 type bridge
+ ip link set dev bond1.10 master br10
+
+ ip link add name br20 type bridge
+ ip link set dev bond1.20 master br20
+}
+
+lag_unlink_slaves_test()
+{
+ # Test that ports are correctly unlinked from their LAG master, when
+ # the LAG and its VLAN uppers are enslaved to bridges
+ RET=0
+
+ lag_create
+
+ ip link set dev $swp1 nomaster
+ check_err $? "lag slave $swp1 was not unlinked from master"
+ ip link set dev $swp2 nomaster
+ check_err $? "lag slave $swp2 was not unlinked from master"
+
+ # Try to configure corresponding VLANs as router interfaces
+ ip -6 address add 2001:db8:1::1/64 dev $swp1
+ check_err $? "failed to configure ip address on $swp1"
+
+ ip link add link $swp1 name $swp1.10 type vlan id 10
+ ip -6 address add 2001:db8:10::1/64 dev $swp1.10
+ check_err $? "failed to configure ip address on $swp1.10"
+
+ ip link add link $swp1 name $swp1.20 type vlan id 20
+ ip -6 address add 2001:db8:20::1/64 dev $swp1.20
+ check_err $? "failed to configure ip address on $swp1.20"
+
+ log_test "lag slaves unlinking"
+
+ ip link del dev $swp1.20
+ ip link del dev $swp1.10
+ ip address flush dev $swp1
+
+ ip link del dev br20
+ ip link del dev br10
+ ip link del dev br0
+ ip link del dev bond1
+}
+
+lag_dev_deletion_test()
+{
+ # Test that LAG device is correctly deleted, when the LAG and its VLAN
+ # uppers are enslaved to bridges
+ RET=0
+
+ lag_create
+
+ ip link del dev bond1
+
+ log_test "lag device deletion"
+
+ ip link del dev br20
+ ip link del dev br10
+ ip link del dev br0
+}
+
+vlan_interface_uppers_test()
+{
+ # Test that uppers of a VLAN interface are correctly sanitized
+ RET=0
+
+ ip link add name br0 type bridge vlan_filtering 1
+ ip link set dev $swp1 master br0
+
+ ip link add link br0 name br0.10 type vlan id 10
+ ip link add link br0.10 name macvlan0 \
+ type macvlan mode private &> /dev/null
+ check_fail $? "managed to create a macvlan when should not"
+
+ ip -6 address add 2001:db8:1::1/64 dev br0.10
+ ip link add link br0.10 name macvlan0 type macvlan mode private
+ check_err $? "did not manage to create a macvlan when should"
+
+ ip link del dev macvlan0
+
+ ip link add name vrf-test type vrf table 10
+ ip link set dev br0.10 master vrf-test
+ check_err $? "did not manage to enslave vlan interface to vrf"
+ ip link del dev vrf-test
+
+ ip link add name br-test type bridge
+ ip link set dev br0.10 master br-test &> /dev/null
+ check_fail $? "managed to enslave vlan interface to bridge when should not"
+ ip link del dev br-test
+
+ log_test "vlan interface uppers"
+
+ ip link del dev br0
+}
+
+devlink_reload_test()
+{
+ # Test that after executing all the above configuration tests, a
+ # devlink reload can be performed without errors
+ RET=0
+
+ devlink dev reload "$DEVLINK_DEV"
+ check_err $? "devlink reload failed"
+
+ log_test "devlink reload - last test"
+
+ sleep 20
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 16:48:28 +0000