summaryrefslogtreecommitdiff
path: root/net/mac80211
diff options
context:
space:
mode:
Diffstat (limited to 'net/mac80211')
-rw-r--r--net/mac80211/mesh_ps.c4
-rw-r--r--net/mac80211/mlme.c54
-rw-r--r--net/mac80211/pm.c7
3 files changed, 45 insertions, 20 deletions
diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c
index 3b7bfc01ee36..22290a929b94 100644
--- a/net/mac80211/mesh_ps.c
+++ b/net/mac80211/mesh_ps.c
@@ -229,6 +229,10 @@ void ieee80211_mps_sta_status_update(struct sta_info *sta)
enum nl80211_mesh_power_mode pm;
bool do_buffer;
+ /* For non-assoc STA, prevent buffering or frame transmission */
+ if (sta->sta_state < IEEE80211_STA_ASSOC)
+ return;
+
/*
* use peer-specific power mode if peering is established and the
* peer's power mode is known
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 211246b46819..21bccd849b3f 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -31,10 +31,12 @@
#include "led.h"
#define IEEE80211_AUTH_TIMEOUT (HZ / 5)
+#define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
#define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
#define IEEE80211_AUTH_MAX_TRIES 3
#define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
#define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
+#define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
#define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
#define IEEE80211_ASSOC_MAX_TRIES 3
@@ -209,8 +211,9 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
struct ieee80211_channel *channel,
const struct ieee80211_ht_operation *ht_oper,
const struct ieee80211_vht_operation *vht_oper,
- struct cfg80211_chan_def *chandef, bool verbose)
+ struct cfg80211_chan_def *chandef, bool tracking)
{
+ struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct cfg80211_chan_def vht_chandef;
u32 ht_cfreq, ret;
@@ -229,7 +232,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
channel->band);
/* check that channel matches the right operating channel */
- if (channel->center_freq != ht_cfreq) {
+ if (!tracking && channel->center_freq != ht_cfreq) {
/*
* It's possible that some APs are confused here;
* Netgear WNDR3700 sometimes reports 4 higher than
@@ -237,11 +240,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
* since we look at probe response/beacon data here
* it should be OK.
*/
- if (verbose)
- sdata_info(sdata,
- "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
- channel->center_freq, ht_cfreq,
- ht_oper->primary_chan, channel->band);
+ sdata_info(sdata,
+ "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
+ channel->center_freq, ht_cfreq,
+ ht_oper->primary_chan, channel->band);
ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
goto out;
}
@@ -295,7 +297,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
channel->band);
break;
default:
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT operation IE has invalid channel width (%d), disable VHT\n",
vht_oper->chan_width);
@@ -304,7 +306,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
}
if (!cfg80211_chandef_valid(&vht_chandef)) {
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT information is invalid, disable VHT\n");
ret = IEEE80211_STA_DISABLE_VHT;
@@ -317,7 +319,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
}
if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
- if (verbose)
+ if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
sdata_info(sdata,
"AP VHT information doesn't match HT, disable VHT\n");
ret = IEEE80211_STA_DISABLE_VHT;
@@ -333,18 +335,27 @@ out:
if (ret & IEEE80211_STA_DISABLE_VHT)
vht_chandef = *chandef;
+ /*
+ * Ignore the DISABLED flag when we're already connected and only
+ * tracking the APs beacon for bandwidth changes - otherwise we
+ * might get disconnected here if we connect to an AP, update our
+ * regulatory information based on the AP's country IE and the
+ * information we have is wrong/outdated and disables the channel
+ * that we're actually using for the connection to the AP.
+ */
while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
- IEEE80211_CHAN_DISABLED)) {
+ tracking ? 0 :
+ IEEE80211_CHAN_DISABLED)) {
if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
ret = IEEE80211_STA_DISABLE_HT |
IEEE80211_STA_DISABLE_VHT;
- goto out;
+ break;
}
ret |= chandef_downgrade(chandef);
}
- if (chandef->width != vht_chandef.width && verbose)
+ if (chandef->width != vht_chandef.width && !tracking)
sdata_info(sdata,
"capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
@@ -384,7 +395,7 @@ static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
/* calculate new channel (type) based on HT/VHT operation IEs */
flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper,
- vht_oper, &chandef, false);
+ vht_oper, &chandef, true);
/*
* Downgrade the new channel if we associated with restricted
@@ -3395,10 +3406,13 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata)
if (tx_flags == 0) {
auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
- ifmgd->auth_data->timeout_started = true;
+ auth_data->timeout_started = true;
run_again(sdata, auth_data->timeout);
} else {
- auth_data->timeout_started = false;
+ auth_data->timeout =
+ round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
+ auth_data->timeout_started = true;
+ run_again(sdata, auth_data->timeout);
}
return 0;
@@ -3435,7 +3449,11 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
assoc_data->timeout_started = true;
run_again(sdata, assoc_data->timeout);
} else {
- assoc_data->timeout_started = false;
+ assoc_data->timeout =
+ round_jiffies_up(jiffies +
+ IEEE80211_ASSOC_TIMEOUT_LONG);
+ assoc_data->timeout_started = true;
+ run_again(sdata, assoc_data->timeout);
}
return 0;
@@ -3830,7 +3848,7 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
cbss->channel,
ht_oper, vht_oper,
- &chandef, true);
+ &chandef, false);
sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
local->rx_chains);
diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c
index 7fc5d0d8149a..340126204343 100644
--- a/net/mac80211/pm.c
+++ b/net/mac80211/pm.c
@@ -99,10 +99,13 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan)
}
mutex_unlock(&local->sta_mtx);
- /* remove all interfaces */
+ /* remove all interfaces that were created in the driver */
list_for_each_entry(sdata, &local->interfaces, list) {
- if (!ieee80211_sdata_running(sdata))
+ if (!ieee80211_sdata_running(sdata) ||
+ sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
+ sdata->vif.type == NL80211_IFTYPE_MONITOR)
continue;
+
drv_remove_interface(local, sdata);
}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 01:57:57 +0000