diff options
Diffstat (limited to 'include/net')
-rw-r--r-- | include/net/cfg80211.h | 104 | ||||
-rw-r--r-- | include/net/ieee80211_radiotap.h | 2 | ||||
-rw-r--r-- | include/net/mac80211.h | 19 |
3 files changed, 121 insertions, 4 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 81174f9b8d14..56e905cd4b07 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1147,6 +1147,7 @@ struct cfg80211_tid_stats { * @rx_duration: aggregate PPDU duration(usecs) for all the frames from a peer * @pertid: per-TID statistics, see &struct cfg80211_tid_stats, using the last * (IEEE80211_NUM_TIDS) index for MSDUs not encapsulated in QoS-MPDUs. + * @ack_signal: signal strength (in dBm) of the last ACK frame. */ struct station_info { u64 filled; @@ -1191,6 +1192,7 @@ struct station_info { u64 rx_duration; u8 rx_beacon_signal_avg; struct cfg80211_tid_stats pertid[IEEE80211_NUM_TIDS + 1]; + s8 ack_signal; }; #if IS_ENABLED(CONFIG_CFG80211) @@ -1905,11 +1907,16 @@ struct cfg80211_auth_request { * @ASSOC_REQ_DISABLE_HT: Disable HT (802.11n) * @ASSOC_REQ_DISABLE_VHT: Disable VHT * @ASSOC_REQ_USE_RRM: Declare RRM capability in this association + * @CONNECT_REQ_EXTERNAL_AUTH_SUPPORT: User space indicates external + * authentication capability. Drivers can offload authentication to + * userspace if this flag is set. Only applicable for cfg80211_connect() + * request (connect callback). */ enum cfg80211_assoc_req_flags { - ASSOC_REQ_DISABLE_HT = BIT(0), - ASSOC_REQ_DISABLE_VHT = BIT(1), - ASSOC_REQ_USE_RRM = BIT(2), + ASSOC_REQ_DISABLE_HT = BIT(0), + ASSOC_REQ_DISABLE_VHT = BIT(1), + ASSOC_REQ_USE_RRM = BIT(2), + CONNECT_REQ_EXTERNAL_AUTH_SUPPORT = BIT(3), }; /** @@ -2601,6 +2608,33 @@ struct cfg80211_pmk_conf { }; /** + * struct cfg80211_external_auth_params - Trigger External authentication. + * + * Commonly used across the external auth request and event interfaces. + * + * @action: action type / trigger for external authentication. Only significant + * for the authentication request event interface (driver to user space). + * @bssid: BSSID of the peer with which the authentication has + * to happen. Used by both the authentication request event and + * authentication response command interface. + * @ssid: SSID of the AP. Used by both the authentication request event and + * authentication response command interface. + * @key_mgmt_suite: AKM suite of the respective authentication. Used by the + * authentication request event interface. + * @status: status code, %WLAN_STATUS_SUCCESS for successful authentication, + * use %WLAN_STATUS_UNSPECIFIED_FAILURE if user space cannot give you + * the real status code for failures. Used only for the authentication + * response command interface (user space to driver). + */ +struct cfg80211_external_auth_params { + enum nl80211_external_auth_action action; + u8 bssid[ETH_ALEN] __aligned(2); + struct cfg80211_ssid ssid; + unsigned int key_mgmt_suite; + u16 status; +}; + +/** * struct cfg80211_ops - backend description for wireless configuration * * This struct is registered by fullmac card drivers and/or wireless stacks @@ -2923,6 +2957,9 @@ struct cfg80211_pmk_conf { * (invoked with the wireless_dev mutex held) * @del_pmk: delete the previously configured PMK for the given authenticator. * (invoked with the wireless_dev mutex held) + * + * @external_auth: indicates result of offloaded authentication processing from + * user space */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -3216,6 +3253,8 @@ struct cfg80211_ops { const struct cfg80211_pmk_conf *conf); int (*del_pmk)(struct wiphy *wiphy, struct net_device *dev, const u8 *aa); + int (*external_auth)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_external_auth_params *params); }; /* @@ -3517,6 +3556,35 @@ enum wiphy_vendor_command_flags { }; /** + * enum wiphy_opmode_flag - Station's ht/vht operation mode information flags + * + * @STA_OPMODE_MAX_BW_CHANGED: Max Bandwidth changed + * @STA_OPMODE_SMPS_MODE_CHANGED: SMPS mode changed + * @STA_OPMODE_N_SS_CHANGED: max N_SS (number of spatial streams) changed + * + */ +enum wiphy_opmode_flag { + STA_OPMODE_MAX_BW_CHANGED = BIT(0), + STA_OPMODE_SMPS_MODE_CHANGED = BIT(1), + STA_OPMODE_N_SS_CHANGED = BIT(2), +}; + +/** + * struct sta_opmode_info - Station's ht/vht operation mode information + * @changed: contains value from &enum wiphy_opmode_flag + * @smps_mode: New SMPS mode of a station + * @bw: new max bandwidth value of a station + * @rx_nss: new rx_nss value of a station + */ + +struct sta_opmode_info { + u32 changed; + u8 smps_mode; + u8 bw; + u8 rx_nss; +}; + +/** * struct wiphy_vendor_command - vendor command definition * @info: vendor command identifying information, as used in nl80211 * @flags: flags, see &enum wiphy_vendor_command_flags @@ -5685,6 +5753,20 @@ void cfg80211_radar_event(struct wiphy *wiphy, struct cfg80211_chan_def *chandef, gfp_t gfp); /** + * cfg80211_sta_opmode_change_notify - STA's ht/vht operation mode change event + * @dev: network device + * @mac: MAC address of a station which opmode got modified + * @sta_opmode: station's current opmode value + * @gfp: context flags + * + * Driver should call this function when station's opmode modified via action + * frame. + */ +void cfg80211_sta_opmode_change_notify(struct net_device *dev, const u8 *mac, + struct sta_opmode_info *sta_opmode, + gfp_t gfp); + +/** * cfg80211_cac_event - Channel availability check (CAC) event * @netdev: network device * @chandef: chandef for the current channel @@ -5758,10 +5840,13 @@ bool cfg80211_rx_unexpected_4addr_frame(struct net_device *dev, * @addr: the address of the peer * @cookie: the cookie filled in @probe_client previously * @acked: indicates whether probe was acked or not + * @ack_signal: signal strength (in dBm) of the ACK frame. + * @is_valid_ack_signal: indicates the ack_signal is valid or not. * @gfp: allocation flags */ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, - u64 cookie, bool acked, gfp_t gfp); + u64 cookie, bool acked, s32 ack_signal, + bool is_valid_ack_signal, gfp_t gfp); /** * cfg80211_report_obss_beacon - report beacon from other APs @@ -6202,6 +6287,17 @@ void cfg80211_nan_func_terminated(struct wireless_dev *wdev, /* ethtool helper */ void cfg80211_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info); +/** + * cfg80211_external_auth_request - userspace request for authentication + * @netdev: network device + * @params: External authentication parameters + * @gfp: allocation flags + * Returns: 0 on success, < 0 on error + */ +int cfg80211_external_auth_request(struct net_device *netdev, + struct cfg80211_external_auth_params *params, + gfp_t gfp); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h index d91f9e7f4d71..960236fb1681 100644 --- a/include/net/ieee80211_radiotap.h +++ b/include/net/ieee80211_radiotap.h @@ -149,6 +149,8 @@ enum ieee80211_radiotap_ampdu_flags { IEEE80211_RADIOTAP_AMPDU_IS_LAST = 0x0008, IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR = 0x0010, IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN = 0x0020, + IEEE80211_RADIOTAP_AMPDU_EOF = 0x0040, + IEEE80211_RADIOTAP_AMPDU_EOF_KNOWN = 0x0080, }; /* for IEEE80211_RADIOTAP_VHT */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 906e90223066..dc3e9d9c3527 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -6,6 +6,7 @@ * Copyright 2007-2010 Johannes Berg <johannes@sipsolutions.net> * Copyright 2013-2014 Intel Mobile Communications GmbH * Copyright (C) 2015 - 2017 Intel Deutschland GmbH + * Copyright (C) 2018 Intel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -934,6 +935,7 @@ struct ieee80211_tx_info { u8 ampdu_len; u8 antenna; u16 tx_time; + bool is_valid_ack_signal; void *status_driver_data[19 / sizeof(void *)]; } status; struct { @@ -1098,6 +1100,9 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * the first subframe. * @RX_FLAG_ICV_STRIPPED: The ICV is stripped from this frame. CRC checking must * be done in the hardware. + * @RX_FLAG_AMPDU_EOF_BIT: Value of the EOF bit in the A-MPDU delimiter for this + * frame + * @RX_FLAG_AMPDU_EOF_BIT_KNOWN: The EOF value is known */ enum mac80211_rx_flags { RX_FLAG_MMIC_ERROR = BIT(0), @@ -1124,6 +1129,8 @@ enum mac80211_rx_flags { RX_FLAG_MIC_STRIPPED = BIT(21), RX_FLAG_ALLOW_SAME_PN = BIT(22), RX_FLAG_ICV_STRIPPED = BIT(23), + RX_FLAG_AMPDU_EOF_BIT = BIT(24), + RX_FLAG_AMPDU_EOF_BIT_KNOWN = BIT(25), }; /** @@ -2063,6 +2070,14 @@ struct ieee80211_txq { * @IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA: Hardware supports buffer STA on * TDLS links. * + * @IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP: The driver requires the + * mgd_prepare_tx() callback to be called before transmission of a + * deauthentication frame in case the association was completed but no + * beacon was heard. This is required in multi-channel scenarios, where the + * virtual interface might not be given air time for the transmission of + * the frame, as it is not synced with the AP/P2P GO yet, and thus the + * deauthentication frame might not be transmitted. + * * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { @@ -2106,6 +2121,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_REPORTS_LOW_ACK, IEEE80211_HW_SUPPORTS_TX_FRAG, IEEE80211_HW_SUPPORTS_TDLS_BUFFER_STA, + IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP, /* keep last, obviously */ NUM_IEEE80211_HW_FLAGS @@ -3350,6 +3366,9 @@ enum ieee80211_reconfig_type { * management frame prior to having successfully associated to allow the * driver to give it channel time for the transmission, to get a response * and to be able to synchronize with the GO. + * For drivers that set %IEEE80211_HW_DEAUTH_NEED_MGD_TX_PREP, mac80211 + * would also call this function before transmitting a deauthentication + * frame in case that no beacon was heard from the AP/P2P GO. * The callback will be called before each transmission and upon return * mac80211 will transmit the frame right away. * The callback is optional and can (should!) sleep. |