1 files changed, 158 insertions, 9 deletions

diff --git a/include/linux/soundwire/sdw_intel.h b/include/linux/soundwire/sdw_intel.h
index c9427cb6020b..979b41b5dcb4 100644
--- a/include/linux/soundwire/sdw_intel.h
+++ b/include/linux/soundwire/sdw_intel.h
@@ -4,36 +4,185 @@
 #ifndef __SDW_INTEL_H
 #define __SDW_INTEL_H
 
+#include <linux/irqreturn.h>
+#include <linux/soundwire/sdw.h>
+
+/**
+ * struct sdw_intel_stream_params_data: configuration passed during
+ * the @params_stream callback, e.g. for interaction with DSP
+ * firmware.
+ */
+struct sdw_intel_stream_params_data {
+	struct snd_pcm_substream *substream;
+	struct snd_soc_dai *dai;
+	struct snd_pcm_hw_params *hw_params;
+	int link_id;
+	int alh_stream_id;
+};
+
+/**
+ * struct sdw_intel_stream_free_data: configuration passed during
+ * the @free_stream callback, e.g. for interaction with DSP
+ * firmware.
+ */
+struct sdw_intel_stream_free_data {
+	struct snd_pcm_substream *substream;
+	struct snd_soc_dai *dai;
+	int link_id;
+};
+
 /**
  * struct sdw_intel_ops: Intel audio driver callback ops
  *
- * @config_stream: configure the stream with the hw_params
- * the first argument containing the context is mandatory
  */
 struct sdw_intel_ops {
-	int (*config_stream)(void *arg, void *substream,
-			     void *dai, void *hw_params, int stream_num);
+	int (*params_stream)(struct device *dev,
+			     struct sdw_intel_stream_params_data *params_data);
+	int (*free_stream)(struct device *dev,
+			   struct sdw_intel_stream_free_data *free_data);
+};
+
+/**
+ * struct sdw_intel_acpi_info - Soundwire Intel information found in ACPI tables
+ * @handle: ACPI controller handle
+ * @count: link count found with "sdw-master-count" property
+ * @link_mask: bit-wise mask listing links enabled by BIOS menu
+ *
+ * this structure could be expanded to e.g. provide all the _ADR
+ * information in case the link_mask is not sufficient to identify
+ * platform capabilities.
+ */
+struct sdw_intel_acpi_info {
+	acpi_handle handle;
+	int count;
+	u32 link_mask;
+};
+
+struct sdw_intel_link_res;
+
+/* Intel clock-stop/pm_runtime quirk definitions */
+
+/*
+ * Force the clock to remain on during pm_runtime suspend. This might
+ * be needed if Slave devices do not have an alternate clock source or
+ * if the latency requirements are very strict.
+ */
+#define SDW_INTEL_CLK_STOP_NOT_ALLOWED		BIT(0)
+
+/*
+ * Stop the bus during pm_runtime suspend. If set, a complete bus
+ * reset and re-enumeration will be performed when the bus
+ * restarts. This mode shall not be used if Slave devices can generate
+ * in-band wakes.
+ */
+#define SDW_INTEL_CLK_STOP_TEARDOWN		BIT(1)
+
+/*
+ * Stop the bus during pm_suspend if Slaves are not wake capable
+ * (e.g. speaker amplifiers). The clock-stop mode is typically
+ * slightly higher power than when the IP is completely powered-off.
+ */
+#define SDW_INTEL_CLK_STOP_WAKE_CAPABLE_ONLY	BIT(2)
+
+/*
+ * Require a bus reset (and complete re-enumeration) when exiting
+ * clock stop modes. This may be needed if the controller power was
+ * turned off and all context lost. This quirk shall not be used if a
+ * Slave device needs to remain enumerated and keep its context,
+ * e.g. to provide the reasons for the wake, report acoustic events or
+ * pass a history buffer.
+ */
+#define SDW_INTEL_CLK_STOP_BUS_RESET		BIT(3)
+
+struct sdw_intel_slave_id {
+	int link_id;
+	struct sdw_slave_id id;
 };
 
 /**
- * struct sdw_intel_res - Soundwire Intel resource structure
+ * struct sdw_intel_ctx - context allocated by the controller
+ * driver probe
+ * @count: link count
+ * @mmio_base: mmio base of SoundWire registers, only used to check
+ * hardware capabilities after all power dependencies are settled.
+ * @link_mask: bit-wise mask listing SoundWire links reported by the
+ * Controller
+ * @num_slaves: total number of devices exposed across all enabled links
+ * @handle: ACPI parent handle
+ * @links: information for each link (controller-specific and kept
+ * opaque here)
+ * @ids: array of slave_id, representing Slaves exposed across all enabled
+ * links
+ * @link_list: list to handle interrupts across all links
+ * @shim_lock: mutex to handle concurrent rmw access to shared SHIM registers.
+ */
+struct sdw_intel_ctx {
+	int count;
+	void __iomem *mmio_base;
+	u32 link_mask;
+	int num_slaves;
+	acpi_handle handle;
+	struct sdw_intel_link_res *links;
+	struct sdw_intel_slave_id *ids;
+	struct list_head link_list;
+	struct mutex shim_lock; /* lock for access to shared SHIM registers */
+};
+
+/**
+ * struct sdw_intel_res - Soundwire Intel global resource structure,
+ * typically populated by the DSP driver
+ *
+ * @count: link count
  * @mmio_base: mmio base of SoundWire registers
  * @irq: interrupt number
  * @handle: ACPI parent handle
  * @parent: parent device
  * @ops: callback ops
- * @arg: callback arg
+ * @dev: device implementing hwparams and free callbacks
+ * @link_mask: bit-wise mask listing links selected by the DSP driver
+ * This mask may be a subset of the one reported by the controller since
+ * machine-specific quirks are handled in the DSP driver.
+ * @clock_stop_quirks: mask array of possible behaviors requested by the
+ * DSP driver. The quirks are common for all links for now.
  */
 struct sdw_intel_res {
+	int count;
 	void __iomem *mmio_base;
 	int irq;
 	acpi_handle handle;
 	struct device *parent;
 	const struct sdw_intel_ops *ops;
-	void *arg;
+	struct device *dev;
+	u32 link_mask;
+	u32 clock_stop_quirks;
 };
 
-void *sdw_intel_init(acpi_handle *parent_handle, struct sdw_intel_res *res);
-void sdw_intel_exit(void *arg);
+/*
+ * On Intel platforms, the SoundWire IP has dependencies on power
+ * rails shared with the DSP, and the initialization steps are split
+ * in three. First an ACPI scan to check what the firmware describes
+ * in DSDT tables, then an allocation step (with no hardware
+ * configuration but with all the relevant devices created) and last
+ * the actual hardware configuration. The final stage is a global
+ * interrupt enable which is controlled by the DSP driver. Splitting
+ * these phases helps simplify the boot flow and make early decisions
+ * on e.g. which machine driver to select (I2S mode, HDaudio or
+ * SoundWire).
+ */
+int sdw_intel_acpi_scan(acpi_handle *parent_handle,
+			struct sdw_intel_acpi_info *info);
+
+void sdw_intel_process_wakeen_event(struct sdw_intel_ctx *ctx);
+
+struct sdw_intel_ctx *
+sdw_intel_probe(struct sdw_intel_res *res);
+
+int sdw_intel_startup(struct sdw_intel_ctx *ctx);
+
+void sdw_intel_exit(struct sdw_intel_ctx *ctx);
+
+void sdw_intel_enable_irq(void __iomem *mmio_base, bool enable);
+
+irqreturn_t sdw_intel_thread(int irq, void *dev_id);
 
 #endif