diff options
Diffstat (limited to 'include/linux/qed/qed_if.h')
| -rw-r--r-- | include/linux/qed/qed_if.h | 182 |
1 files changed, 181 insertions, 1 deletions
diff --git a/include/linux/qed/qed_if.h b/include/linux/qed/qed_if.h index 4c29439f54bf..b1e3c57c7117 100644 --- a/include/linux/qed/qed_if.h +++ b/include/linux/qed/qed_if.h @@ -34,6 +34,96 @@ enum dcbx_protocol_type { DCBX_MAX_PROTOCOL_TYPE }; +#ifdef CONFIG_DCB +#define QED_LLDP_CHASSIS_ID_STAT_LEN 4 +#define QED_LLDP_PORT_ID_STAT_LEN 4 +#define QED_DCBX_MAX_APP_PROTOCOL 32 +#define QED_MAX_PFC_PRIORITIES 8 +#define QED_DCBX_DSCP_SIZE 64 + +struct qed_dcbx_lldp_remote { + u32 peer_chassis_id[QED_LLDP_CHASSIS_ID_STAT_LEN]; + u32 peer_port_id[QED_LLDP_PORT_ID_STAT_LEN]; + bool enable_rx; + bool enable_tx; + u32 tx_interval; + u32 max_credit; +}; + +struct qed_dcbx_lldp_local { + u32 local_chassis_id[QED_LLDP_CHASSIS_ID_STAT_LEN]; + u32 local_port_id[QED_LLDP_PORT_ID_STAT_LEN]; +}; + +struct qed_dcbx_app_prio { + u8 roce; + u8 roce_v2; + u8 fcoe; + u8 iscsi; + u8 eth; +}; + +struct qed_dbcx_pfc_params { + bool willing; + bool enabled; + u8 prio[QED_MAX_PFC_PRIORITIES]; + u8 max_tc; +}; + +struct qed_app_entry { + bool ethtype; + bool enabled; + u8 prio; + u16 proto_id; + enum dcbx_protocol_type proto_type; +}; + +struct qed_dcbx_params { + struct qed_app_entry app_entry[QED_DCBX_MAX_APP_PROTOCOL]; + u16 num_app_entries; + bool app_willing; + bool app_valid; + bool app_error; + bool ets_willing; + bool ets_enabled; + bool ets_cbs; + bool valid; + u8 ets_pri_tc_tbl[QED_MAX_PFC_PRIORITIES]; + u8 ets_tc_bw_tbl[QED_MAX_PFC_PRIORITIES]; + u8 ets_tc_tsa_tbl[QED_MAX_PFC_PRIORITIES]; + struct qed_dbcx_pfc_params pfc; + u8 max_ets_tc; +}; + +struct qed_dcbx_admin_params { + struct qed_dcbx_params params; + bool valid; +}; + +struct qed_dcbx_remote_params { + struct qed_dcbx_params params; + bool valid; +}; + +struct qed_dcbx_operational_params { + struct qed_dcbx_app_prio app_prio; + struct qed_dcbx_params params; + bool valid; + bool enabled; + bool ieee; + bool cee; + u32 err; +}; + +struct qed_dcbx_get { + struct qed_dcbx_operational_params operational; + struct qed_dcbx_lldp_remote lldp_remote; + struct qed_dcbx_lldp_local lldp_local; + struct qed_dcbx_remote_params remote; + struct qed_dcbx_admin_params local; +}; +#endif + enum qed_led_mode { QED_LED_MODE_OFF, QED_LED_MODE_ON, @@ -58,8 +148,70 @@ struct qed_eth_pf_params { u16 num_cons; }; +/* Most of the the parameters below are described in the FW iSCSI / TCP HSI */ +struct qed_iscsi_pf_params { + u64 glbl_q_params_addr; + u64 bdq_pbl_base_addr[2]; + u32 max_cwnd; + u16 cq_num_entries; + u16 cmdq_num_entries; + u16 dup_ack_threshold; + u16 tx_sws_timer; + u16 min_rto; + u16 min_rto_rt; + u16 max_rto; + + /* The following parameters are used during HW-init + * and these parameters need to be passed as arguments + * to update_pf_params routine invoked before slowpath start + */ + u16 num_cons; + u16 num_tasks; + + /* The following parameters are used during protocol-init */ + u16 half_way_close_timeout; + u16 bdq_xoff_threshold[2]; + u16 bdq_xon_threshold[2]; + u16 cmdq_xoff_threshold; + u16 cmdq_xon_threshold; + u16 rq_buffer_size; + + u8 num_sq_pages_in_ring; + u8 num_r2tq_pages_in_ring; + u8 num_uhq_pages_in_ring; + u8 num_queues; + u8 log_page_size; + u8 rqe_log_size; + u8 max_fin_rt; + u8 gl_rq_pi; + u8 gl_cmd_pi; + u8 debug_mode; + u8 ll2_ooo_queue_id; + u8 ooo_enable; + + u8 is_target; + u8 bdq_pbl_num_entries[2]; +}; + +struct qed_rdma_pf_params { + /* Supplied to QED during resource allocation (may affect the ILT and + * the doorbell BAR). + */ + u32 min_dpis; /* number of requested DPIs */ + u32 num_mrs; /* number of requested memory regions */ + u32 num_qps; /* number of requested Queue Pairs */ + u32 num_srqs; /* number of requested SRQ */ + u8 roce_edpm_mode; /* see QED_ROCE_EDPM_MODE_ENABLE */ + u8 gl_pi; /* protocol index */ + + /* Will allocate rate limiters to be used with QPs */ + u8 enable_dcqcn; +}; + struct qed_pf_params { struct qed_eth_pf_params eth_pf_params; + struct qed_iscsi_pf_params iscsi_pf_params; + struct qed_rdma_pf_params rdma_pf_params; }; enum qed_int_mode { @@ -100,6 +252,8 @@ struct qed_dev_info { /* MFW version */ u32 mfw_rev; + bool rdma_supported; + u32 flash_size; u8 mf_mode; bool tx_switching; @@ -111,6 +265,7 @@ enum qed_sb_type { enum qed_protocol { QED_PROTOCOL_ETH, + QED_PROTOCOL_ISCSI, }; struct qed_link_params { @@ -325,7 +480,8 @@ struct qed_common_ops { int (*chain_alloc)(struct qed_dev *cdev, enum qed_chain_use_mode intended_use, enum qed_chain_mode mode, - u16 num_elems, + enum qed_chain_cnt_type cnt_type, + u32 num_elems, size_t elem_size, struct qed_chain *p_chain); @@ -333,6 +489,30 @@ struct qed_common_ops { struct qed_chain *p_chain); /** + * @brief get_coalesce - Get coalesce parameters in usec + * + * @param cdev + * @param rx_coal - Rx coalesce value in usec + * @param tx_coal - Tx coalesce value in usec + * + */ + void (*get_coalesce)(struct qed_dev *cdev, u16 *rx_coal, u16 *tx_coal); + +/** + * @brief set_coalesce - Configure Rx coalesce value in usec + * + * @param cdev + * @param rx_coal - Rx coalesce value in usec + * @param tx_coal - Tx coalesce value in usec + * @param qid - Queue index + * @param sb_id - Status Block Id + * + * @return 0 on success, error otherwise. + */ + int (*set_coalesce)(struct qed_dev *cdev, u16 rx_coal, u16 tx_coal, + u8 qid, u16 sb_id); + +/** * @brief set_led - Configure LED mode * * @param cdev |