diff options
Diffstat (limited to 'include/linux/dmaengine.h')
-rw-r--r-- | include/linux/dmaengine.h | 176 |
1 files changed, 161 insertions, 15 deletions
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index f114bc7790bc..2b9f2ac7ed60 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -48,19 +48,20 @@ enum dma_status { /** * enum dma_transaction_type - DMA transaction types/indexes + * + * Note: The DMA_ASYNC_TX capability is not to be set by drivers. It is + * automatically set as dma devices are registered. */ enum dma_transaction_type { DMA_MEMCPY, DMA_XOR, - DMA_PQ_XOR, - DMA_DUAL_XOR, - DMA_PQ_UPDATE, - DMA_ZERO_SUM, - DMA_PQ_ZERO_SUM, + DMA_PQ, + DMA_XOR_VAL, + DMA_PQ_VAL, DMA_MEMSET, - DMA_MEMCPY_CRC32C, DMA_INTERRUPT, DMA_PRIVATE, + DMA_ASYNC_TX, DMA_SLAVE, }; @@ -70,18 +71,25 @@ enum dma_transaction_type { /** * enum dma_ctrl_flags - DMA flags to augment operation preparation, - * control completion, and communicate status. + * control completion, and communicate status. * @DMA_PREP_INTERRUPT - trigger an interrupt (callback) upon completion of - * this transaction + * this transaction * @DMA_CTRL_ACK - the descriptor cannot be reused until the client - * acknowledges receipt, i.e. has has a chance to establish any - * dependency chains + * acknowledges receipt, i.e. has has a chance to establish any dependency + * chains * @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s) * @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s) * @DMA_COMPL_SRC_UNMAP_SINGLE - set to do the source dma-unmapping as single * (if not set, do the source dma-unmapping as page) * @DMA_COMPL_DEST_UNMAP_SINGLE - set to do the destination dma-unmapping as single * (if not set, do the destination dma-unmapping as page) + * @DMA_PREP_PQ_DISABLE_P - prevent generation of P while generating Q + * @DMA_PREP_PQ_DISABLE_Q - prevent generation of Q while generating P + * @DMA_PREP_CONTINUE - indicate to a driver that it is reusing buffers as + * sources that were the result of a previous operation, in the case of a PQ + * operation it continues the calculation with new sources + * @DMA_PREP_FENCE - tell the driver that subsequent operations depend + * on the result of this operation */ enum dma_ctrl_flags { DMA_PREP_INTERRUPT = (1 << 0), @@ -90,9 +98,32 @@ enum dma_ctrl_flags { DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3), DMA_COMPL_SRC_UNMAP_SINGLE = (1 << 4), DMA_COMPL_DEST_UNMAP_SINGLE = (1 << 5), + DMA_PREP_PQ_DISABLE_P = (1 << 6), + DMA_PREP_PQ_DISABLE_Q = (1 << 7), + DMA_PREP_CONTINUE = (1 << 8), + DMA_PREP_FENCE = (1 << 9), }; /** + * enum sum_check_bits - bit position of pq_check_flags + */ +enum sum_check_bits { + SUM_CHECK_P = 0, + SUM_CHECK_Q = 1, +}; + +/** + * enum pq_check_flags - result of async_{xor,pq}_zero_sum operations + * @SUM_CHECK_P_RESULT - 1 if xor zero sum error, 0 otherwise + * @SUM_CHECK_Q_RESULT - 1 if reed-solomon zero sum error, 0 otherwise + */ +enum sum_check_flags { + SUM_CHECK_P_RESULT = (1 << SUM_CHECK_P), + SUM_CHECK_Q_RESULT = (1 << SUM_CHECK_Q), +}; + + +/** * dma_cap_mask_t - capabilities bitmap modeled after cpumask_t. * See linux/cpumask.h */ @@ -210,6 +241,11 @@ struct dma_async_tx_descriptor { * @global_node: list_head for global dma_device_list * @cap_mask: one or more dma_capability flags * @max_xor: maximum number of xor sources, 0 if no capability + * @max_pq: maximum number of PQ sources and PQ-continue capability + * @copy_align: alignment shift for memcpy operations + * @xor_align: alignment shift for xor operations + * @pq_align: alignment shift for pq operations + * @fill_align: alignment shift for memset operations * @dev_id: unique device ID * @dev: struct device reference for dma mapping api * @device_alloc_chan_resources: allocate resources and return the @@ -217,7 +253,9 @@ struct dma_async_tx_descriptor { * @device_free_chan_resources: release DMA channel's resources * @device_prep_dma_memcpy: prepares a memcpy operation * @device_prep_dma_xor: prepares a xor operation - * @device_prep_dma_zero_sum: prepares a zero_sum operation + * @device_prep_dma_xor_val: prepares a xor validation operation + * @device_prep_dma_pq: prepares a pq operation + * @device_prep_dma_pq_val: prepares a pqzero_sum operation * @device_prep_dma_memset: prepares a memset operation * @device_prep_dma_interrupt: prepares an end of chain interrupt operation * @device_prep_slave_sg: prepares a slave dma operation @@ -232,7 +270,13 @@ struct dma_device { struct list_head channels; struct list_head global_node; dma_cap_mask_t cap_mask; - int max_xor; + unsigned short max_xor; + unsigned short max_pq; + u8 copy_align; + u8 xor_align; + u8 pq_align; + u8 fill_align; + #define DMA_HAS_PQ_CONTINUE (1 << 15) int dev_id; struct device *dev; @@ -246,9 +290,17 @@ struct dma_device { struct dma_async_tx_descriptor *(*device_prep_dma_xor)( struct dma_chan *chan, dma_addr_t dest, dma_addr_t *src, unsigned int src_cnt, size_t len, unsigned long flags); - struct dma_async_tx_descriptor *(*device_prep_dma_zero_sum)( + struct dma_async_tx_descriptor *(*device_prep_dma_xor_val)( struct dma_chan *chan, dma_addr_t *src, unsigned int src_cnt, - size_t len, u32 *result, unsigned long flags); + size_t len, enum sum_check_flags *result, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_pq)( + struct dma_chan *chan, dma_addr_t *dst, dma_addr_t *src, + unsigned int src_cnt, const unsigned char *scf, + size_t len, unsigned long flags); + struct dma_async_tx_descriptor *(*device_prep_dma_pq_val)( + struct dma_chan *chan, dma_addr_t *pq, dma_addr_t *src, + unsigned int src_cnt, const unsigned char *scf, size_t len, + enum sum_check_flags *pqres, unsigned long flags); struct dma_async_tx_descriptor *(*device_prep_dma_memset)( struct dma_chan *chan, dma_addr_t dest, int value, size_t len, unsigned long flags); @@ -267,6 +319,96 @@ struct dma_device { void (*device_issue_pending)(struct dma_chan *chan); }; +static inline bool dmaengine_check_align(u8 align, size_t off1, size_t off2, size_t len) +{ + size_t mask; + + if (!align) + return true; + mask = (1 << align) - 1; + if (mask & (off1 | off2 | len)) + return false; + return true; +} + +static inline bool is_dma_copy_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->copy_align, off1, off2, len); +} + +static inline bool is_dma_xor_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->xor_align, off1, off2, len); +} + +static inline bool is_dma_pq_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->pq_align, off1, off2, len); +} + +static inline bool is_dma_fill_aligned(struct dma_device *dev, size_t off1, + size_t off2, size_t len) +{ + return dmaengine_check_align(dev->fill_align, off1, off2, len); +} + +static inline void +dma_set_maxpq(struct dma_device *dma, int maxpq, int has_pq_continue) +{ + dma->max_pq = maxpq; + if (has_pq_continue) + dma->max_pq |= DMA_HAS_PQ_CONTINUE; +} + +static inline bool dmaf_continue(enum dma_ctrl_flags flags) +{ + return (flags & DMA_PREP_CONTINUE) == DMA_PREP_CONTINUE; +} + +static inline bool dmaf_p_disabled_continue(enum dma_ctrl_flags flags) +{ + enum dma_ctrl_flags mask = DMA_PREP_CONTINUE | DMA_PREP_PQ_DISABLE_P; + + return (flags & mask) == mask; +} + +static inline bool dma_dev_has_pq_continue(struct dma_device *dma) +{ + return (dma->max_pq & DMA_HAS_PQ_CONTINUE) == DMA_HAS_PQ_CONTINUE; +} + +static unsigned short dma_dev_to_maxpq(struct dma_device *dma) +{ + return dma->max_pq & ~DMA_HAS_PQ_CONTINUE; +} + +/* dma_maxpq - reduce maxpq in the face of continued operations + * @dma - dma device with PQ capability + * @flags - to check if DMA_PREP_CONTINUE and DMA_PREP_PQ_DISABLE_P are set + * + * When an engine does not support native continuation we need 3 extra + * source slots to reuse P and Q with the following coefficients: + * 1/ {00} * P : remove P from Q', but use it as a source for P' + * 2/ {01} * Q : use Q to continue Q' calculation + * 3/ {00} * Q : subtract Q from P' to cancel (2) + * + * In the case where P is disabled we only need 1 extra source: + * 1/ {01} * Q : use Q to continue Q' calculation + */ +static inline int dma_maxpq(struct dma_device *dma, enum dma_ctrl_flags flags) +{ + if (dma_dev_has_pq_continue(dma) || !dmaf_continue(flags)) + return dma_dev_to_maxpq(dma); + else if (dmaf_p_disabled_continue(flags)) + return dma_dev_to_maxpq(dma) - 1; + else if (dmaf_continue(flags)) + return dma_dev_to_maxpq(dma) - 3; + BUG(); +} + /* --- public DMA engine API --- */ #ifdef CONFIG_DMA_ENGINE @@ -296,7 +438,11 @@ static inline void net_dmaengine_put(void) #ifdef CONFIG_ASYNC_TX_DMA #define async_dmaengine_get() dmaengine_get() #define async_dmaengine_put() dmaengine_put() +#ifdef CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH +#define async_dma_find_channel(type) dma_find_channel(DMA_ASYNC_TX) +#else #define async_dma_find_channel(type) dma_find_channel(type) +#endif /* CONFIG_ASYNC_TX_DISABLE_CHANNEL_SWITCH */ #else static inline void async_dmaengine_get(void) { @@ -309,7 +455,7 @@ async_dma_find_channel(enum dma_transaction_type type) { return NULL; } -#endif +#endif /* CONFIG_ASYNC_TX_DMA */ dma_cookie_t dma_async_memcpy_buf_to_buf(struct dma_chan *chan, void *dest, void *src, size_t len); |